Search Results

Search found 3953 results on 159 pages for 'overlapped io'.

Page 92/159 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Solution for storing sata drives outside of case

  - by Jeffrey Kevin Pry

  I have a system that has 8 sata disks in a software raid 5 array using mdadm. My issue is that I want to move the drives from inside of the computer case in order to cool more efficiently. I have looked all over the web and only seem to find enclosures that hide the drives connectors behind an estata port or some other internal raid controller. Basically what I want is an enclosure or equivalent that I can run independent sata cables to and either power as well, or have it have its own power supply. I have the sata ports on the motherboard available and don't want to limit io by using one port with a multiplier or the like. One final caveat, I am a college student on a budget and don't have a fortune to spend on such an enclosure. Thanks in advance for your help and advice.

  Read the article

• Calculating IOPS for a single HDD - what am I doing wrong?

  - by red888

  So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

  Read the article

• MS-DOS 7.1, Active-Boot

  - by user3005255

  I created a MS-DOS 7.1 (Win 98) active-boot USB-flash stick and it functions properly. Nevertheless I still have some unsolved issues: I want to change my keyboard-layout to german but I don´t know where to start since I only have the "basic-DOS" with IO.sys, MSDOS.sys + command.com. I already created Autoexec.bat + config.sys but don´t know which files I need and which I have to change in order to get a german keyboard. Also I can´t really shutdown my DOS properly, what is the right way to do it in MS-DOS 7.1? Thanks very much in advance for your help!

  Read the article

• Perl MiniWebserver

  - by snikolov

  hey guys i have config this miniwebserver, however i require the server to download a file in the local directory i am getting a problem can you please fix my issue thanks !/usr/bin/perl use strict; use Socket; use IO::Socket; my $buffer; my $file; my $length; my $output; Simple web server in Perl Serves out .html files, echos form data sub parse_form { my $data = $_[0]; my %data; foreach (split /&/, $data) { my ($key, $val) = split /=/; $val =~ s/+/ /g; $val =~ s/%(..)/chr(hex($1))/eg; $data{$key} = $val;} return %data; } Setup and create socket my $port = shift; defined($port) or die "Usage: $0 portno\n"; my $DOCUMENT_ROOT = $ENV{'HOME'} . "public"; my $server = new IO::Socket::INET(Proto = 'tcp', LocalPort = $port, Listen = SOMAXCONN, Reuse = 1); $server or die "Unable to create server socket: $!" ; Await requests and handle them as they arrive while (my $client = $server-accept()) { $client-autoflush(1); my %request = (); my %data; { -------- Read Request --------------- local $/ = Socket::CRLF; while (<$client>) { chomp; # Main http request if (/\s*(\w+)\s*([^\s]+)\s*HTTP\/(\d.\d)/) { $request{METHOD} = uc $1; $request{URL} = $2; $request{HTTP_VERSION} = $3; } # Standard headers elsif (/:/) { (my $type, my $val) = split /:/, $_, 2; $type =~ s/^\s+//; foreach ($type, $val) { s/^\s+//; s/\s+$//; } $request{lc $type} = $val; } # POST data elsif (/^$/) { read($client, $request{CONTENT}, $request{'content-length'}) if defined $request{'content-length'}; last; } } } -------- SORT OUT METHOD --------------- if ($request{METHOD} eq 'GET') { if ($request{URL} =~ /(.*)\?(.*)/) { $request{URL} = $1; $request{CONTENT} = $2; %data = parse_form($request{CONTENT}); } else { %data = (); } $data{"_method"} = "GET"; } elsif ($request{METHOD} eq 'POST') { %data = parse_form($request{CONTENT}); $data{"_method"} = "POST"; } else { $data{"_method"} = "ERROR"; } ------- Serve file ---------------------- my $localfile = $DOCUMENT_ROOT.$request{URL}; Send Response if (open(FILE, "<$localfile")) { print $client "HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: text/html", Socket::CRLF; print $client Socket::CRLF; my $buffer; while (read(FILE, $buffer, 4096)) { print $client $buffer; } $data{"_status"} = "200"; } else { $file = 'a.pl'; open(INFILE, $file); while (<INFILE>) { $output .= $_; ##output of the file } $length = length($output); print $client "'HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: application/octet-stream", Socket::CRLF; print $client "Content-Length:".$length, Socket::CRLF; print $client "Accept-Ranges: bytes", Socket::CRLF; print $client 'Content-Disposition: attachment; filename="test.zip"', Socket::CRLF; print $client $output, Socket::CRLF; print $client 'Content-Transfer-Encoding: binary"', Socket::CRLF; print $client "Connection: Keep-Alive", Socket::CRLF; # #$data{"_status"} = "404"; # } close(FILE); Log Request print ($DOCUMENT_ROOT.$request{URL},"\n"); foreach (keys(%data)) { print (" $_ = $data{$_}\n"); } ----------- Close Connection and loop ------------------ close $client; } END

  Read the article

• Having Troubles Getting My Apache Server Online(NodeJS and Apache)

  - by Jeff Armingol

  I am new here. This is my situation. I am using nodejs modules, serialport2 and socket.io, because I am trying to forward the data from my arduino hardware through serialports. In my server side script, I read the data then forward it to the client side. Now I am using Apache to serve the html page,which is the client side. I am running Nodejs on port 8000 and Apache on port 80. It is running OKAY when I view it in my browser typing localhost:80. The data is appearing and seems fine. Now when I tried to get my Apache server online using a Free DDNS provider(http://www.noip.com/) and my port80, it loaded the webpage but there are no data appearing on the page. What seems to be the problem here? Really need your expertise and advice. Thanks in advanced!

  Read the article

• mount fstab partition with public access

  - by Mikhail

  How do I specify that an fstab mount-point should be public? I want /mnt/windows to be accessible to normal users. I believe I am using ntfs-3g. If I set the /mnt/windows to 777 will it be publicly accessible without changing the permissions on the NTFS disk? /dev/sdb4 /mnt/windows ntfs noatime 0 1 /dev/sdb5 / ext4 noatime 0 1 UUID=5AA4-168D /boot/efi vfat defaults 0 1 and localhost my_computer # stat /mnt/windows/ File: '/mnt/windows/' Size: 12288 Blocks: 24 IO Block: 512 directory Device: 814h/2068d Inode: 5 Links: 1 Access: (0700/drwx------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-08-21 18:29:13.597722200 -0500 Modify: 2014-08-21 18:29:13.597722200 -0500 Change: 2014-08-21 18:29:13.597722200 -0500 Birth: -

  Read the article

• How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt?

  - by Stu Thompson

  Prelude: I'm a code-monkey that's increasingly taken on SysAdmin duties for my small company. My code is our product, and increasingly we provide the same app as SaaS. About 18 months ago I moved our servers from a premium hosting centric vendor to a barebones rack pusher in a tier IV data center. (Literally across the street.) This ment doing much more ourselves--things like networking, storage and monitoring. As part the big move, to replace our leased direct attached storage from the hosting company, I built a 9TB two-node NAS based on SuperMicro chassises, 3ware RAID cards, Ubuntu 10.04, two dozen SATA disks, DRBD and . It's all lovingly documented in three blog posts: Building up & testing a new 9TB SATA RAID10 NFSv4 NAS: Part I, Part II and Part III. We also setup a Cacit monitoring system. Recently we've been adding more and more data points, like SMART values. I could not have done all this without the awesome boffins at ServerFault. It's been a fun and educational experience. My boss is happy (we saved bucket loads of $$$), our customers are happy (storage costs are down), I'm happy (fun, fun, fun). Until yesterday. Outage & Recovery: Some time after lunch we started getting reports of sluggish performance from our application, an on-demand streaming media CMS. About the same time our Cacti monitoring system sent a blizzard of emails. One of the more telling alerts was a graph of iostat await. Performance became so degraded that Pingdom began sending "server down" notifications. The overall load was moderate, there was not traffic spike. After logging onto the application servers, NFS clients of the NAS, I confirmed that just about everything was experiencing highly intermittent and insanely long IO wait times. And once I hopped onto the primary NAS node itself, the same delays were evident when trying to navigate the problem array's file system. Time to fail over, that went well. Within 20 minuts everything was confirmed to be back up and running perfectly. Post-Mortem: After any and all system failures I perform a post-mortem to determine the cause of the failure. First thing I did was ssh back into the box and start reviewing logs. It was offline, completely. Time for a trip to the data center. Hardware reset, backup an and running. In /var/syslog I found this scary looking entry: Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_00], 6 Currently unreadable (pending) sectors Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_07], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 171 to 170 Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 16 Currently unreadable (pending) sectors Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 4 Offline uncorrectable sectors Nov 15 06:49:45 umbilo smartd[2827]: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error Nov 15 06:49:45 umbilo smartd[2827]: # 1 Short offline Completed: read failure 90% 6576 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 2 Short offline Completed: read failure 90% 6087 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 3 Short offline Completed: read failure 10% 5901 656821791 Nov 15 06:49:45 umbilo smartd[2827]: # 4 Short offline Completed: read failure 90% 5818 651637856 Nov 15 06:49:45 umbilo smartd[2827]: So I went to check the Cacti graphs for the disks in the array. Here we see that, yes, disk 7 is slipping away just like syslog says it is. But we also see that disk 8's SMART Read Erros are fluctuating. There are no messages about disk 8 in syslog. More interesting is that the fluctuating values for disk 8 directly correlate to the high IO wait times! My interpretation is that: Disk 8 is experiencing an odd hardware fault that results in intermittent long operation times. Somehow this fault condition on the disk is locking up the entire array Maybe there is a more accurate or correct description, but the net result has been that the one disk is impacting the performance of the whole array. The Question(s) How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt? Am I being naïve to think that the RAID card should have dealt with this? How can I prevent a single misbehaving disk from impacting the entire array? Am I missing something?

  Read the article

• Windows 8.1 Professional Hyper-V - can I create my own linux VM through it?

  - by KevinM1

  I have a Windows 8.1 Professional desktop, and would like to have a Linux Mint VM on it so I can do some opensource web development work. I've tried VirtualBox, but it's giving me an IO error during the Mint .iso installation. VMWare Player flat out tells me it can't install because I have Hyper-V on my machine by default. My biggest concern is nuking the desktop, which is where I do most of my non-development work/browsing/etc. The desktop seems to be listed as a VM itself in the Hyper-V Manager, and I don't want to accidentally break it. So, two questions: Can I create the Mint VM I want/need for my work? Can I do it without messing up the desktop?

  Read the article

• Eclipse: Help with EGit

  - by someguy

  I want to be able to use a version control system. Although Eclipse comes with CVS, I think it's better that I use a distributed version control system, such as GIT. I was pretty much sold after reading this article. Anyway, I installed EGit and followed this guide on how to set it up. However, I ran in to a few problems: Adding .project and .classpath inside .gitignore did not seem to work. When I try to open a committed file, it throws an error, saying: "IO error reading Git blob [...]" What am I doing wrong? If more information is needed, please specify and I will give.

  Read the article

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• Insane SmartGWT + GWT situation... Error on instantiating ListGridRecord?

  - by Xandel

  Hi all, I am asking this here in the hope that someone has maybe come across this situation too... I have posted this on the SmartGWT forum: I am having an issue when trying to instantiate a ListGridRecord object on my server side. I am using the ListGrid on the client side, I want to use GWT's RPC to pass back an array of ListGridRecord objects to populate the grid with. I know that SmartGWT is designed to link to a datasource but I want full control over when I populate the grid and this shouldn't be as much of a nightmare as it is to do. I have searched high and low and cannot find anyone complaining about the same thing. The exception however (listed below) has come up (in my search findings) as a possible memory error - where increasing the memory (-Xmx512m argument) has apparently solved the problem. It did not, however, sort out mine. If anyone can shed any light on this I would greatly appreciate it! Here are my details: Developing using Eclipse Galileo on Ubuntu 9.04 (Jaunty) and GWT 2.0.3, I built the initial GWT project using the webAppCreator bundled with the GWT 2.0.3 release and imported the project into Eclipse as described on the GWT Getting Started Page (as using the GWT Eclipse plugin caused even more nightmares when trying to connect to a database - this is apparently due to using the Google App Engine and turning it off as all the posts suggested only causes ClassNotFound exceptions). The line that causes the error is literally: ListGridRecord a = new ListGridRecord(); The error I get is the following: 00:00:25.916 [WARN] Exception while dispatching incoming RPC call com.google.gwt.user.server.rpc.UnexpectedException : Service method 'public abstract java.lang.String za.co.company.product.client.service.EmployeeServi ce.getAllEmployeeAsListGridRecord()' threw an unexpected exception: java.lang.UnsatisfiedLinkError: com.smartgwt.client.util.LogUtil.setJSNIErrorHandl er()V at com.google.gwt.user.server.rpc.RPC.encodeResponseF orFailure(RPC.java:378) at com.google.gwt.user.server.rpc.RPC.invokeAndEncode Response(RPC.java:581) at com.google.gwt.user.server.rpc.RemoteServiceServle t.processCall(RemoteServiceServlet.java:188) at com.google.gwt.user.server.rpc.RemoteServiceServle t.processPost(RemoteServiceServlet.java:224) at com.google.gwt.user.server.rpc.AbstractRemoteServi ceServlet.doPost(AbstractRemoteServiceServlet.java :62) at javax.servlet.http.HttpServlet.service(HttpServlet .java:637) at javax.servlet.http.HttpServlet.service(HttpServlet .java:717) at org.mortbay.jetty.servlet.ServletHolder.handle(Ser vletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(Se rvletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle( SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(Se ssionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(Co ntextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebA ppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(Ha ndlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle (RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(Ha ndlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(Htt pConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.co ntent(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser. java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpPa rser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnec tion.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(Selec tChannelEndPoint.java:395) at org.mortbay.thread.QueuedThreadPool$PoolThread.run (QueuedThreadPool.java:488) Caused by: java.lang.UnsatisfiedLinkError: com.smartgwt.client.util.LogUtil.setJSNIErrorHandl er()V at com.smartgwt.client.util.LogUtil.setJSNIErrorHandl er(Native Method) at com.smartgwt.client.core.JsObject.(JsObjec t.java:30) at za.co.company.product.server.service.EmployeeServi ceImpl.getAllEmployeeAsListGridRecord(EmployeeServ iceImpl.java:83) at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.user.server.rpc.RPC.invokeAndEncode Response(RPC.java:562) at com.google.gwt.user.server.rpc.RemoteServiceServle t.processCall(RemoteServiceServlet.java:188) at com.google.gwt.user.server.rpc.RemoteServiceServle t.processPost(RemoteServiceServlet.java:224) at com.google.gwt.user.server.rpc.AbstractRemoteServi ceServlet.doPost(AbstractRemoteServiceServlet.java :62) at javax.servlet.http.HttpServlet.service(HttpServlet .java:637) at javax.servlet.http.HttpServlet.service(HttpServlet .java:717) at org.mortbay.jetty.servlet.ServletHolder.handle(Ser vletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(Se rvletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle( SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(Se ssionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(Co ntextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebA ppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(Ha ndlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle (RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(Ha ndlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(Htt pConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.co ntent(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser. java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpPa rser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnec tion.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(Selec tChannelEndPoint.java:395) at org.mortbay.thread.QueuedThreadPool$PoolThread.run (QueuedThreadPool.java:488) Thanks in advance! Xandel

  Read the article

• Uploading with browser makes all other browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• cygwin rsync over ssh very slow

  - by Waleed Hamra

  I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

  Read the article

• Reading serialised object from file

  - by nico

  Hi everyone. I'm writing a little Java program (it's an ImageJ plugin, but the problem is not specifically ImageJ related) and I have some problem, most probably due to the fact that I never really programmed in Java before... So, I have a Vector of Vectors and I'm trying to save it to a file and read it. The variable is defined as: Vector <Vector <myROI> > ROIs = new Vector <Vector <myROI> >(); where myROI is a class that I previously defined. Now, to write the vector to a file I use: void saveROIs() { SaveDialog save = new SaveDialog("Save ROIs...", imp.getTitle(), ".xroi"); String name = save.getFileName(); if (name == null) return; String dir = save.getDirectory(); try { FileOutputStream fos = new FileOutputStream(dir+name); ObjectOutputStream oos = new ObjectOutputStream(fos); oos.writeObject(ROIs); oos.close(); } catch (Exception e) { IJ.log(e.toString()); } } This correctly generates a binary file containing (I suppose) the object ROIs. Now, I use a very similar code to read the file: void loadROIs() { OpenDialog open = new OpenDialog("Load ROIs...", imp.getTitle(), ".xroi"); String name = open.getFileName(); if (name == null) return; String dir = open.getDirectory(); try { FileInputStream fin = new FileInputStream(dir+name); ObjectInputStream ois = new ObjectInputStream(fin); ROIs = (Vector <Vector <myROI> >) ois.readObject(); // This gives error ois.close(); } catch (Exception e) { IJ.log(e.toString()); } } But this function does not work. First, I get a warning: warning: [unchecked] unchecked cast found : java.lang.Object required: java.util.Vector<java.util.Vector<myROI>> ROIs = (Vector <Vector <myROI> >) ois.readObject(); ^ I Googled for that and see that I can suppress by prepending @SuppressWarnings("unchecked"), but this just makes things worst, as I get an error: <identifier> expected ROIs = (Vector <Vector <myROI> >) ois.readObject(); ^ In any case, if I omit @SuppressWarnings and ignore the warning, the object is not read and an exception is thrown java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: myROI Again Google tells me myROI needs to implements Serializable. I tried just adding implements Serializable to the class definition, but it is not sufficient. Can anyone give me some hints on how to procede in this case? Also, how to get rid of the typecast warning?

  Read the article

• Solution to Manage and Monitor (Ubuntu) Machines

  - by Elmar Weber

  I'm looking for a tool like Canonical (system management and monitoring for Ubuntu) that is Open Source and free. The goal is to manage a dozen or so KVM machines for private testing purposes. I know of puppet and munin or RHQ as separate tools to manage and monitor, but I'd prefer something integrated. Any tips? Basic requirements would be: system package management and update (individual selection for each managed node) configuration of basic system services (Users, NFS, cron, ideally also Apache) monitoring (charting of system resources, disk, io, memory, etc) and alerting, ideally a default configuration with sensible values for alerts

  Read the article

• How to share my localhost over the internet?

  - by Loolooii

  I really want to share my localhost over the internet to show my friends the progress of the website we're working on, so that I don't need to upload it to the public server each time I make a change. showoff.io is not free and localtunnel gives me "failed to authenticate" when trying to upload my public key (a lot of people seem to have this problem and there doesn't seem to be a solution for this). Does anyone know any other free service I can use or any other solution at all? I'm using a Mac. Thanks. UPDATE: with localhost I mean a web server running on my computer, I have a dynamic IP address and no I'm not behind a router (just using a wireless modem).

  Read the article

• New CentOS/cPanel servers showing high load averages at idle

  - by Jax

  I have taken delivery of two identically specced CentOS/cPanel servers, showing the same behaviour of a resting load average of 1.30, 1.21, 1.16 and yet the CPU is sitting 100% idle. Hardware: Xeon(R) CPU E3-1270 4GB RAM Behavior:- top shows CPU 99.9% idle virtually no disk IO Some command output :- uname -a Linux server.myserver.com 2.6.18-308.4.1.el5PAE #1 SMP Tue Apr 17 17:47:38 EDT 2012 i686 i686 i386 GNU/Linux top top - 10:37:50 up 1:47, 1 user, load average: 1.28, 1.20, 1.17 Tasks: 199 total, 1 running, 198 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4125104k total, 438764k used, 3686340k free, 25788k buffers Swap: 2096440k total, 0k used, 2096440k free, 291080k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2160 640 552 S 0.0 0.0 0:00.89 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 35 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 38 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root 10 -5 0 0 0 S 0.0 0.0 0:06.42 events/0 27 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/1 28 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/2 29 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/3 30 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/4 31 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/5 32 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/6 33 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/7 34 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper 35 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthread 45 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 46 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/1 47 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/2 48 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/3 49 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/4 50 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/5 51 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/6 52 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/7 53 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 189 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/0 190 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/1 191 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/2 192 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/3 193 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/4 194 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/5 195 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/6 196 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/7 199 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khubd ps axf PID TTY STAT TIME COMMAND 1 ? Ss 0:00 init [3] 2 ? S< 0:00 [migration/0] 3 ? SN 0:00 [ksoftirqd/0] 4 ? S< 0:00 [watchdog/0] 5 ? S< 0:00 [migration/1] 6 ? SN 0:00 [ksoftirqd/1] 7 ? S< 0:00 [watchdog/1] 8 ? S< 0:00 [migration/2] 9 ? SN 0:00 [ksoftirqd/2] 10 ? S< 0:00 [watchdog/2] 11 ? S< 0:00 [migration/3] 12 ? SN 0:00 [ksoftirqd/3] 13 ? S< 0:00 [watchdog/3] 14 ? S< 0:00 [migration/4] 15 ? SN 0:00 [ksoftirqd/4] 16 ? S< 0:00 [watchdog/4] 17 ? S< 0:00 [migration/5] 18 ? SN 0:00 [ksoftirqd/5] 19 ? S< 0:00 [watchdog/5] 20 ? S< 0:00 [migration/6] 21 ? SN 0:00 [ksoftirqd/6] 22 ? S< 0:00 [watchdog/6] 23 ? S< 0:00 [migration/7] 24 ? SN 0:00 [ksoftirqd/7] 25 ? S< 0:00 [watchdog/7] 26 ? S< 0:06 [events/0] 27 ? S< 0:00 [events/1] 28 ? S< 0:00 [events/2] 29 ? S< 0:00 [events/3] 30 ? S< 0:00 [events/4] 31 ? S< 0:00 [events/5] 32 ? S< 0:00 [events/6] 33 ? S< 0:00 [events/7] 34 ? S< 0:00 [khelper] 35 ? S< 0:00 [kthread] 45 ? S< 0:00 \_ [kblockd/0] 46 ? S< 0:00 \_ [kblockd/1] 47 ? S< 0:00 \_ [kblockd/2] 48 ? S< 0:00 \_ [kblockd/3] 49 ? S< 0:00 \_ [kblockd/4] 50 ? S< 0:00 \_ [kblockd/5] 51 ? S< 0:00 \_ [kblockd/6] 52 ? S< 0:00 \_ [kblockd/7] 53 ? S< 0:00 \_ [kacpid] 189 ? S< 0:00 \_ [cqueue/0] 190 ? S< 0:00 \_ [cqueue/1] 191 ? S< 0:00 \_ [cqueue/2] 192 ? S< 0:00 \_ [cqueue/3] 193 ? S< 0:00 \_ [cqueue/4] 194 ? S< 0:00 \_ [cqueue/5] 195 ? S< 0:00 \_ [cqueue/6] 196 ? S< 0:00 \_ [cqueue/7] 199 ? S< 0:00 \_ [khubd] 201 ? S< 0:00 \_ [kseriod] 301 ? S 0:00 \_ [khungtaskd] 302 ? S 0:00 \_ [pdflush] 303 ? S 0:00 \_ [pdflush] 304 ? S< 0:00 \_ [kswapd0] 305 ? S< 0:00 \_ [aio/0] 306 ? S< 0:00 \_ [aio/1] 307 ? S< 0:00 \_ [aio/2] 308 ? S< 0:00 \_ [aio/3] 309 ? S< 0:00 \_ [aio/4] 310 ? S< 0:00 \_ [aio/5] 311 ? S< 0:00 \_ [aio/6] 312 ? S< 0:00 \_ [aio/7] 472 ? S< 0:00 \_ [kpsmoused] 551 ? S< 0:00 \_ [ata/0] 552 ? S< 0:00 \_ [ata/1] 553 ? S< 0:00 \_ [ata/2] 554 ? S< 0:00 \_ [ata/3] 555 ? S< 0:00 \_ [ata/4] 556 ? S< 0:00 \_ [ata/5] 557 ? S< 0:00 \_ [ata/6] 558 ? S< 0:00 \_ [ata/7] 559 ? S< 0:00 \_ [ata_aux] 569 ? S< 0:00 \_ [scsi_eh_0] 570 ? S< 0:00 \_ [scsi_eh_1] 571 ? S< 0:00 \_ [scsi_eh_2] 572 ? S< 0:00 \_ [scsi_eh_3] 573 ? S< 0:00 \_ [scsi_eh_4] 574 ? S< 0:00 \_ [scsi_eh_5] 593 ? S< 0:00 \_ [kstriped] 630 ? S< 0:00 \_ [kjournald] 655 ? S< 0:00 \_ [kauditd] 1860 ? S< 0:00 \_ [kmpathd/0] 1861 ? S< 0:00 \_ [kmpathd/1] 1862 ? S< 0:00 \_ [kmpathd/2] 1863 ? S< 0:00 \_ [kmpathd/3] 1864 ? S< 0:00 \_ [kmpathd/4] 1865 ? S< 0:00 \_ [kmpathd/5] 1866 ? S< 0:00 \_ [kmpathd/6] 1867 ? S< 0:00 \_ [kmpathd/7] 1868 ? S< 0:00 \_ [kmpath_handlerd] 1902 ? S< 0:00 \_ [kjournald] 1904 ? S< 0:00 \_ [kjournald] 1906 ? S< 0:00 \_ [kjournald] 1908 ? S< 0:00 \_ [kjournald] 1910 ? S< 0:00 \_ [kjournald] 2184 ? S< 0:00 \_ [iscsi_eh] 2288 ? S< 0:00 \_ [cnic_wq] 2298 ? S< 0:00 \_ [bnx2i_thread/0] 2299 ? S< 0:00 \_ [bnx2i_thread/1] 2300 ? S< 0:00 \_ [bnx2i_thread/2] 2301 ? S< 0:00 \_ [bnx2i_thread/3] 2302 ? S< 0:00 \_ [bnx2i_thread/4] 2303 ? S< 0:00 \_ [bnx2i_thread/5] 2304 ? S< 0:00 \_ [bnx2i_thread/6] 2305 ? S< 0:00 \_ [bnx2i_thread/7] 2330 ? S< 0:00 \_ [ib_addr] 2359 ? S< 0:00 \_ [ib_mcast] 2360 ? S< 0:00 \_ [ib_inform] 2361 ? S< 0:00 \_ [local_sa] 2371 ? S< 0:00 \_ [iw_cm_wq] 2381 ? S< 0:00 \_ [ib_cm/0] 2382 ? S< 0:00 \_ [ib_cm/1] 2383 ? S< 0:00 \_ [ib_cm/2] 2384 ? S< 0:00 \_ [ib_cm/3] 2385 ? S< 0:00 \_ [ib_cm/4] 2386 ? S< 0:00 \_ [ib_cm/5] 2387 ? S< 0:00 \_ [ib_cm/6] 2388 ? S< 0:00 \_ [ib_cm/7] 2398 ? S< 0:00 \_ [rdma_cm] 2684 ? S< 0:00 \_ [bond0] 2882 ? S< 0:00 \_ [bond1] 3195 ? S< 0:00 \_ [kondemand/0] 3197 ? S< 0:00 \_ [kondemand/1] 3198 ? S< 0:00 \_ [kondemand/2] 3199 ? S< 0:00 \_ [kondemand/3] 3200 ? S< 0:00 \_ [kondemand/4] 3201 ? S< 0:00 \_ [kondemand/5] 3202 ? S< 0:00 \_ [kondemand/6] 3203 ? S< 0:00 \_ [kondemand/7] 688 ? S<s 0:00 /sbin/udevd -d 2425 ? S<Lsl 0:00 iscsiuio 2432 ? Ss 0:00 iscsid 2434 ? S<Ls 0:00 iscsid 3061 ? S<sl 0:00 auditd 3063 ? S<sl 0:00 \_ /sbin/audispd 3121 ? Ss 0:00 syslogd -m 0 3124 ? Ss 0:00 klogd -x 3220 ? Ss 0:00 irqbalance 3278 ? Ss 0:00 dbus-daemon --system 3324 ? Ss 0:00 /usr/sbin/acpid 3337 ? Ss 0:00 hald 3338 ? S 0:00 \_ hald-runner 3345 ? S 0:00 \_ hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 3349 ? S 0:00 \_ hald-addon-keyboard: listening on /dev/input/event1 3360 ? S 0:00 \_ hald-addon-storage: polling /dev/sr0 3413 ? Ssl 0:00 automount 3435 ? Ssl 0:00 /usr/sbin/named -u named 3466 ? Ss 0:00 /usr/sbin/sshd 4072 ? Ss 0:00 \_ sshd: root@pts/0 4078 pts/0 Ss 0:00 \_ -bash 5436 pts/0 R+ 0:00 \_ ps axf 3484 ? Ss 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid 3500 ? SLs 0:00 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g 3514 ? S 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/server.myserver.com.pid 3575 ? Sl 0:00 \_ /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log-error=/var/lib/mysql/server.myserver.com.err --pid-fil 3687 ? Ss 0:00 /usr/sbin/exim -bd -q1h 3709 ? Ss 0:00 /usr/sbin/dovecot 3710 ? S 0:00 \_ dovecot-auth 3725 ? S 0:00 \_ pop3-login 3726 ? S 0:00 \_ pop3-login 3727 ? S 0:00 \_ imap-login 3728 ? S 0:00 \_ imap-login 3729 ? Ss 0:00 /usr/local/apache/bin/httpd -k start -DSSL 4326 ? S 0:00 \_ /usr/bin/perl /usr/local/cpanel/bin/leechprotect 4332 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4333 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4334 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4335 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4336 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4337 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4382 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4383 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4384 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 5389 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 5390 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 3741 ? Ss 0:00 pure-ftpd (SERVER) 3746 ? S 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin/pureauth 3759 ? Ss 0:00 crond 3772 ? Ss 0:00 /usr/sbin/atd 3909 ? S 0:00 cpsrvd (SSL) - waiting for connections 5435 ? Z 0:00 \_ [cpsrvd-ssl] <defunct> 3931 ? S 0:00 queueprocd - wait to process a task 3948 ? S 0:00 tailwatchd 3954 ? SN 0:00 cpanellogd - sleeping for logs 4003 ? Ss 0:00 ./nimbus /opt/nimsoft 4016 ? S 0:00 \_ nimbus(controller) 4053 ? Sl 0:00 \_ nimbus(spooler) 4066 ? S 0:00 \_ nimbus(hdb) 4069 ? S 0:00 \_ nimbus(cdm) 4070 ? S 0:00 \_ nimbus(processes) 4023 ? S 0:00 /usr/sbin/smartd -q never 4027 tty1 Ss+ 0:00 /sbin/mingetty tty1 4028 tty2 Ss+ 0:00 /sbin/mingetty tty2 4029 tty3 Ss+ 0:00 /sbin/mingetty tty3 4030 tty4 Ss+ 0:00 /sbin/mingetty tty4 4031 tty5 Ss+ 0:00 /sbin/mingetty tty5 4033 tty6 Ss+ 0:00 /sbin/mingetty tty6 4035 ttyS1 Ss+ 0:00 /sbin/agetty -h -L ttyS1 19200 vt100 vmstat 10 6 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 3718136 25684 257424 0 0 8 3 127 189 0 0 100 0 0 0 0 0 3718136 25700 257420 0 0 0 7 1013 1500 0 0 100 0 0 0 0 0 3718136 25700 257424 0 0 0 1 1013 1551 0 0 100 0 0 0 0 0 3718136 25700 257424 0 0 0 0 1012 1469 0 0 100 0 0 1 0 0 3712680 25716 257424 0 0 0 2 1013 1542 0 0 100 0 0 0 0 0 3718376 25740 257424 0 0 0 46 1017 1534 0 0 100 0 0 Can anyone advise me as to what is the cause of and how I may resolve this behaviour? A kernel/driver conflict perhaps? I don't see any processes in R or D state that might inflate the load averages artificially, I realise it may be considered low in an 8 thread system but its higher at idle than any normal behaviour I've previously come across. Thanks in advance for your time. Edit: iotop Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 26 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.29 % [events/0] 3205 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.10 % [kondemand/2] 3208 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/5] 3209 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/6] 3207 be/3 root 0.00 B/s 0.00 B/s 0.10 % 0.00 % [kondemand/4] 3210 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/7] 3227 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % irqbalance 3288 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rpciod/1] 3287 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rpciod/0] 3206 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/3] 3069 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % auditd 3070 be/2 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % audispd 655 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kauditd] 3619 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % automount 3 be/7 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/0] 3068 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % auditd 29 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/3] 4 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/0] 7 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/1] 10 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/2] 13 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/3] 16 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/4] 19 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/5] 22 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/6] 25 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/7] 27 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/1] 28 be/3 root 0.00 B/s 0.00 B/s 0.29 % 0.00 % [events/2] 30 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/4] 31 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/5] 32 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/6] 33 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/7] 34 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [khelper] 35 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kthread] 45 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kblockd/0]

  Read the article

• What is the specific advantage of a blade server for virtualisation?

  - by ChrisZZ

  We are planning to implement a VDI Solution. We had some discussions about Blade vs Rack. As we are only planning to implement 75-100 Clients, we calculated, that we would need 2 Servers with Dual 8C Processors - and a shared storage server. This calculation is based on a paper by ORACLE, that says, 12 active virtual machines per core. Now, for buying to servers, a blade does not scale financially. But the Blade has some other advantages: a) The interconnectivity between the blades is super-fast. b) IO Virtualisation Are there other advantages, that we should consider, that would make up for price - and are this advantages so important, that we should think about investing in the blade?

  Read the article

• ScrollPanel in java does not appear JTextarea resizes instead

  - by Casper Marcussen

  Hello everyone My program is finished, but testing it out, i found out that the scrollpanel does not appear, it just resizes the JTextarea instead. The code is provided below: package javaapplication15; import java.awt.Container; import java.awt.FlowLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.*; import java.io.IOException; import javax.swing.*; public class Tekstprogram extends JFrame { public Tekstprogram() { setSize(400, 600); setDefaultCloseOperation(EXIT_ON_CLOSE); setResizable(false); Container Indhold = getContentPane(); Indhold.setLayout(new FlowLayout()); JButton openButton = new JButton("Open"); JButton saveButton = new JButton("Save"); final JLabel statusbar = new JLabel("Output of your selection will go here"); final JTextArea TekstOmråde = new JTextArea(29, 30); JScrollPane scrollText = new JScrollPane(TekstOmråde); openButton.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent ae) { JFileChooser chooser = new JFileChooser(); chooser.setMultiSelectionEnabled(true); int option = chooser.showOpenDialog(Tekstprogram.this); if (option == JFileChooser.APPROVE_OPTION) { File[] sf = chooser.getSelectedFiles(); String filelist = "nothing"; if (sf.length > 0) { filelist = sf[0].getName(); } for (int i = 1; i < sf.length; i++) { filelist = filelist + ", " + sf[i].getName(); } try { String strLine; File selectedFile = chooser.getSelectedFile(); FileInputStream in = new FileInputStream(selectedFile); BufferedReader br = new BufferedReader(new InputStreamReader(in)); while ((strLine = br.readLine()) != null) { TekstOmråde.append(strLine + "\n"); } } catch (Exception e) { System.out.println("En fejl opstod ved" + e); } } } }); saveButton.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent ae) { JFileChooser chooser = new JFileChooser(); int option = chooser.showSaveDialog(Tekstprogram.this); if (option == JFileChooser.APPROVE_OPTION) { File file = chooser.getSelectedFile(); try { BufferedWriter out = new BufferedWriter(new FileWriter(file)); out.write(TekstOmråde.getText()); out.close(); } catch (IOException e) { System.out.println("IOException fejl opstod :"); e.printStackTrace(); } } } }); Indhold.add(openButton); Indhold.add(saveButton); Indhold.add(TekstOmråde); Indhold.add(scrollText); Indhold.add(statusbar); } public static void main(String args[]) { Tekstprogram sfc = new Tekstprogram(); sfc.setVisible(true); } } Is there anyway to make the JTexarea static?

  Read the article

• linux + automated rsync command

  - by Diana

  my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

  Read the article

• 250k connections for comet with node.js

  - by Nenad

  How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

  Read the article

• monitoring load on AWS EC2

  - by hortitude

  I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

  Read the article

• how to pass a variable value from one class to another

  - by Arunabha

  I have two packages one is com.firstBooks.series.db.parser which have a java file XMLParser.java, I have another package com.firstBooks.series79 which have a class called AppMain.NW I want to send the value of a variable called _xmlFileName frm AppMain class to the xmlFile variable in XMLParser class, I am posting the code for both the class, kindly help me. package com.firstBooks.series.db.parser; import java.io.IOException; import java.io.InputStream; import java.util.Vector; import net.rim.device.api.xml.parsers.DocumentBuilder; import net.rim.device.api.xml.parsers.DocumentBuilderFactory; import net.rim.device.api.xml.parsers.ParserConfigurationException; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import org.xml.sax.SAXException; import com.firstBooks.series.db.Question; public class XMLParser { private Document document; public static Vector questionList; public static String xmlFile; public XMLParser() { questionList = new Vector(); } public void parseXMl() throws SAXException, IOException, ParserConfigurationException { // Build a document based on the XML file. DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); InputStream inputStream = getClass().getResourceAsStream(xmlFile); document = builder.parse(inputStream); } public void parseDocument() { Element element = document.getDocumentElement(); NodeList nl = element.getElementsByTagName("question"); if (nl != null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element ele = (Element) nl.item(i); Question question = getQuestions(ele); questionList.addElement(question); } } } private Question getQuestions(Element element) { String title = getTextValue(element, "title"); String choice1 = getTextValue(element, "choice1"); String choice2 = getTextValue(element, "choice2"); String choice3 = getTextValue(element, "choice3"); String choice4 = getTextValue(element, "choice4"); String answer = getTextValue(element, "answer"); String rationale = getTextValue(element, "rationale"); Question Questions = new Question(title, choice1, choice2, choice3, choice4, answer, rationale); return Questions; } private String getTextValue(Element ele, String tagName) { String textVal = null; NodeList nl = ele.getElementsByTagName(tagName); if (nl != null && nl.getLength() > 0) { Element el = (Element) nl.item(0); textVal = el.getFirstChild().getNodeValue(); } return textVal; } } Nw the code for AppMain class //#preprocess package com.firstBooks.series79; import net.rim.device.api.ui.UiApplication; import com.firstBooks.series.ui.screens.HomeScreen; public class AppMain extends UiApplication { public static String _xmlFileName; public static boolean _Lite; public static int _totalNumofQuestions; public static void initialize(){ //#ifndef FULL /* //#endif _xmlFileName = "/res/Series79_FULL.xml"; _totalNumofQuestions = 50; _Lite = false; //#ifndef FULL */ //#endif //#ifndef LITE /* //#endif _xmlFileName = "/res/Series79_LITE.xml"; _totalNumofQuestions = 10; _Lite = true; //#ifndef LITE */ //#endif } private AppMain() { initialize(); pushScreen(new HomeScreen()); } public static void main(String args[]) { new AppMain().enterEventDispatcher(); } }

  Read the article

• server performance metrics report and practicality

  - by Anjesh

  I have a need of preparing web server (apache-php) performance report containing important metrics like CPU usage, disk io, memory usage on user basis. Couple of domains are hosted in the same server and they run from separate users using fcgi. The reason being sometimes some hosted applications take lots of cpu usage, making the server slow for other applications (running as separate users). i am planning to develop scripts for this, as i can't seem to find any simple utilities for this purpose. This script will take snapshots of the user wise metrics at defined periods say 15 minutes and record it. Any abnormalities will be reported via emails. How practical is that? also would be interesting to know what else need to be recorded.

  Read the article

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >