Search Results

Search found 2926 results on 118 pages for 'reverse engineer'.

Page 92/118 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • iTunes Home Sharing only works one way between 2 WinXP PC's on the same LAN

    - by scunliffe
    Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

    Read the article

  • Chroot jail of Nginx and php

    - by sqren
    I'm hosting multiple websites on one VPS, and want to chroot each website, eg. /chroot/website1 /chroot/website2 I'm using makejail, which is a highlevel tool, for creating the jails, and copying the libraries and dependencies. Easy peasy. Each website will need nginx, php and mysql. For php I'm using php5-fpm which actually supports chroot by configuration, however I'm not using this (maybe I should?) My question is which approach of the following three is the better: 1) Every website will have its own seperated instance of nginx, php and mysql. The downside is, that each webserver + php has to listen to a different port. I also need a "master" nginx web server in front of them, reverse proxying to the chrooted servers behind it. Probably most secure, but also most advanced. 2) I don't make any chroot jails manually. I setup one nginx web server, that proxies php requests to php-fpm, on different ports. I can have multiple php-fpm configurations each with is own chroot'ed folder. This is quite managable - however only php will be chrooted. Not the actual webserver. Is this secure enough. Also, I tried this option out, and it seems I will need to use TCP instead of sockets for connecting to MySQL. 3) You tell me ;) I'm quite new to chroot jailing, so please correct me if I'm wrong in my assumptions. I've been reading all the tutorials I could find, however, I find the market for chroot guides very scarce. Any help or inputs much appreciated!

    Read the article

  • ATG Live Webcast: Advanced E-Business Suite Architectures

    - by BillSawyer
    I am pleased to announce the ATG Live Webcast event for Dec. 8th, 2011: Advanced E-Business Suite Architectures Join Elke Phelps, Senior Principal Product Manager and Sriram Veeraraghavan, Senior Principal Software Engineer as they discuss advanced E-Business Suite architectures that can help you improve performance, scalability, business continuity, utilization, provisioning, and security. This one-hour webcasts provides an overview of advanced architectures with Q&A. This session will cover the latest advanced architectural options, including the use of Oracle database high-availability features and functions such as Real Application Clusters, ASM, Active Data Guard, clouds, virtualization, Oracle VM, high-availability and load-balancing architectures, WebLogic Server, and more. This session will also cover the latest updates to systems management tools like AutoConfig, and may also include sneak previews of upcoming functionality. This event is targeted to architects, system administrators, DBAs, developers, and implementers. The agenda for the Advanced E-Business Suite Architectures webcast includes the following topics: Advanced Oracle E-Business Suite Architectures Optional External Integrations Oracle E-Business Suite 12.2 Improving Performance and Scalability Providing Business Continuity Improving Utilization and Provisioning Improving Security Date:            Thursday, December 8, 2011Time:           8:00 AM - 9:00 AM Pacific Standard TimePresenter:  Elke Phelps, Senior Principal Product Manager                      Sriram Veeraraghavan, Senior Principal Software EngineerWebcast Registration Link (Preregistration is optional but encouraged)To hear the audio feed:    Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              98514To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  273291684If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training at http://blogs.oracle.com/stevenChan/entry/e_business_suite_technology_learningIf you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

    Read the article

  • Anatomy of a serialization killer

    - by Brian Donahue
    As I had mentioned last month, I have been working on a project to create an easy-to-use managed debugger. It's still an internal tool that we use at Red Gate as part of product support to analyze application errors on customer's computers, and as such, should be easy to use and not require installation. Since the project has got rather large and important, I had decided to use SmartAssembly to protect all of my hard work. This was trivial for the most part, but the loading and saving of results was broken by SA after using the obfuscation, rendering the loading and saving of XML results basically useless, although the merging and error reporting was an absolute godsend and definitely worth the price of admission. (Well, I get my Red Gate licenses for free, but you know what I mean!)My initial reaction was to simply exclude the serializable results class and all of its' members from obfuscation, and that was just dandy, but a few weeks on I decided to look into exactly why serialization had broken and change the code to work with SA so I could write any new code to be compatible with SmartAssembly and save me some additional testing and changes to the SA project.In simple terms, SA does all that it can to prevent serialization problems, for instance, it will not obfuscate public members of a DLL and it will exclude any types with the Serializable attribute from obfuscation. This prevents public members and properties from being made private and having the name changed. If the serialization is done inside the executable, however, public members have the access changed to private and are renamed. That was my first problem, because my types were in the executable assembly and implemented ISerializable, but did not have the Serializable attribute set on them!public class RedFlagResults : ISerializable        {        }The second problem caused by the pruning feature. Although RedFlagResults had public members, they were not truly properties, and used the GetObjectData() method of ISerializable to serialize the members. For that reason, SA could not exclude these members from pruning and further broke the serialization. public class RedFlagResults : ISerializable        {                public List<RedFlag.Exception> Exceptions;                 #region ISerializable Members                 public void GetObjectData(SerializationInfo info, StreamingContext context)                {                                info.AddValue("Exceptions", Exceptions);                }                 #endregionSo to fix this, it was necessary to make Exceptions a proper property by implementing get and set on it. Also, I added the Serializable attribute so that I don't have to exclude the class from obfuscation in the SA project any more. The DoNotPrune attribute means I do not need to exclude the class from pruning.[Serializable, SmartAssembly.Attributes.DoNotPrune]        public class RedFlagResults        {                public List<RedFlag.Exception> Exceptions {get;set;}        }Similarly, the Exception class gets the Serializable and DoNotPrune attributes applied so all of its' properties are excluded from obfuscation.Now my project has some protection from prying eyes by scrambling up the code so it's harder to reverse-engineer, without breaking anything. SmartAssembly has also provided the benefit of merging so that the end-user doesn't need to extract all of the DLL files needed by RedFlag into a directory, and can be run directly from the .zip archive. When an error occurs (hey, I'm only human!), an exception report can be sent to me so I can see what went wrong without having to, er, debug the debugger.

    Read the article

  • Jira access with AJP-Proxy

    - by user60869
    I want to Configure the Jira-Acces over APJ-Proxy. I proceeded as follows (Following this howto: http://confluence.atlassian.com/display/JIRA/Configuring+Apache+Reverse+Proxy+Using+the+AJP+Protocol) : 1) In the server.xml I activate the AJP: 2) Edit VHOST Konfiguration: # Load Proxy-Modules LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so # Load AJP-Modules LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so # Proxy Configuration <IfModule proxy_http_module> ProxyRequests Off ProxyPreserveHost On # Basic AuthType configuration <Proxy *> AuthType Basic AuthName Bamboo-Server AuthUserFile /var/www/userdb Require valid-user AddDefaultCharset off Order deny,allow Deny from all Allow from 192.168.0.1 satisfy any </Proxy> ProxyPass /bamboo http://localhost:8085/bamboo ProxyPassReverse /bamboo http://localhost:8085/bamboo ProxyPass /jira ajp://localhost:8009/ ProxyPassReverse /jira ajp://localhost:8009/ </IfModule> EDIT: In the logs if found follow: //localhost:8080/ [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1819): proxy: worker ajp://localhost:8080/ already initialized [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1913): proxy: initialized single connection worker 1 in child 5578 for (localhost) [Fri Nov 19 14:51:32 2010] [error] ajp_read_header: ajp_ilink_receive failed [Fri Nov 19 14:51:32 2010] [error] (120006)APR does not understand this error code: proxy: read response failed from (null) (localhost) [Fri Nov 19 14:51:32 2010] [debug] proxy_util.c(2008): proxy: AJP: has released connection for (localhost) [Fri Nov 19 14:51:32 2010] [debug] mod_deflate.c(615): [client xx.xx.xx.xx Zlib: Compressed 468 to 320 : URL /jira But It dosen´t work. Somebody have an idea?

    Read the article

  • Identifying mail account used in CRAM-MD5 transaction

    - by ManiacZX
    I suppose this is one of those where the tool for identifying the problem is also the tool used for taking advantage of it. I have a mail server that I am seeing emails that spam is being sent through it. It is not an open relay, the messages in question are being sent by someone authenticating to the smtp with CRAM-MD5. However, the logs only capture the actual data passed, which has been hashed so I cannot see what user account is being used. My suspicion is a simple username/password combo or a user account's password has otherwise been compromised, but I cannot do much about it without knowing what user it is. Of course I can block the IP that is doing it, but that doesn't fix the real problem. I have both the CRAM-MD5 Base64 challenge string and the hashed client auth string containing the username, password and challenge string. I am looking for a way to either reverse this (which I haven't been able to find any information on) or otherwise I suppose I need a dictionary attack tool designed for CRAM-MD5 to run through two lists, one for username and one for password and the constant of the challenge string until it finds a matching result of the authentication string I have logged. Any information on reversing using the data I have logged, a tool to identify it or any alternative methods you have used for this situation would be greatly appreciated.

    Read the article

  • DNS Server on Fedora 11

    - by Funky Si
    I recently upgraded my Fedora 10 server to Fedora 11 and am getting the following error in my DNS/named config. named[27685]: not insecure resolving 'fedoraproject.org/A/IN: 212.104.130.65#53 This only shows for certain addresses some are resolved fine and I can ping and browse to them fine, while others produce the error above. This is my named.conf file acl trusted-servers { 192.168.1.10; }; options { directory "/var/named"; forwarders {212.104.130.9 ; 212.104.130.65; }; forward only; allow-transfer { 127.0.0.1; }; # dnssec-enable yes; # dnssec-validation yes; # dnssec-lookaside . trust-anchor dlv.isc.org.; }; # Forward Zone for hughes.lan domain zone "funkygoth" IN { type master; file "funkygoth.zone"; allow-transfer { trusted-servers; }; }; # Reverse Zone for hughes.lan domain zone "1.168.192.in-addr.arpa" IN { type master; file "1.168.192.zone"; }; include "/etc/named.dnssec.keys"; include "/etc/pki/dnssec-keys/dlv/dlv.isc.org.conf"; include "/etc/pki/dnssec-keys//named.dnssec.keys"; include "/etc/pki/dnssec-keys//dlv/dlv.isc.org.conf"; Anyone know what I have set wrong here?

    Read the article

  • AjaxControlToolkit JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

    - by sohum
    So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

    Read the article

  • Kerberos authentication not working for one single domain

    - by Buddy Casino
    We have a strange problem regarding Kerberos authentication with Apache mod_auth_kerb. We use a very simple krb5.conf, where only a single (main) AD server is configured. There are many domains in the forest, and it seems that SSO is working for most of them, except one. I don't know what is special about that domain, the error message that I see in the Apache logs is "Server not found in Kerberos database": [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1025): [client xx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(714): [client xx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(625): [client xx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(640): [client xx.xxx.xxx.xxx] krb5_get_credentials() failed when verifying KDC [Wed Aug 31 14:56:02 2011] [error] [client xx.xxx.xxx.xxx] failed to verify krb5 credentials: Server not found in Kerberos database [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1110): [client xx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=401 user=(NULL) authtype=(NULL) When I try to kinit that user on the machine on which Apache is running, it works. I also checked that DNS lookups work, including reverse lookup. Who can tell me whats going?

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • 550 Forged HELO with postfix on debian lenny

    - by Martin Ahrer
    I'm running postfix on a debian lenny system. sending mail in general works without any problems. however some recipent mail systems return an error and I can't get a clue what is causing the problem. So far I suspect that this is either postfix setup itself or the reverse dns resolution. The mail server is running on a virtual server from my service provider. running the command hostname is returning my.domain however running host <ip-address> is returning some alias from the virtual server system. now i'm not quite sure if that is causing my problem???? The mail system <recipient-mail>: host mx0.recipient.domain[xxx.xxx.xxx.xxx] refused to talk to me: 550 Forged HELO: you are not my.domain Reporting-MTA: dns; my.domain X-Postfix-Queue-ID: 6A1135B08002 X-Postfix-Sender: rfc822; [email protected] Arrival-Date: Tue, 13 Apr 2010 17:50:36 +0200 (CEST) Final-Recipient: rfc822; recipient-mail Action: failed Status: 5.0.0 Remote-MTA: dns; mx0.recipient.domain Diagnostic-Code: smtp; 550 Forged HELO: you are not my.domain

    Read the article

  • 554 - Sending MTA’s poor reputation

    - by Phil Wilks
    I am running an email server on 77.245.64.44 and have recently started to have problems with remote delivery of emails sent using this server. Only about 5% of recipients are rejecting the emails, but they all share the following common message... Remote host said: 554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. As far as I can tell my server is not on any blacklists, and it is set up correctly (the reverse DNS checks out and so on). I'm not even sure what the "Sending MTA" is, but I assume it's my server. If anyone could shed any light on this I'd really appreciate it! Here's the full bounce message... Could not deliver message to the following recipient(s): Failed Recipient: [email protected] Reason: Remote host said: 554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means. -- The header and top 20 lines of the message follows -- Received: from 79-79-156-160.dynamic.dsl.as9105.com [79.79.156.160] by mail.fruityemail.com with SMTP; Thu, 3 Sep 2009 18:15:44 +0100 From: "Phil Wilks" To: Subject: Test Date: Thu, 3 Sep 2009 18:16:10 +0100 Organization: Fruity Solutions Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_01C2_01CA2CC2.9D9585A0" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Acosujo9LId787jBSpS3xifcdmCF5Q== Content-Language: en-gb x-cr-hashedpuzzle: ADYN AzTI BO8c BsNW Cqg/ D10y E0H4 GYjP HZkV Hc9t ICru JPj7 Jd7O Jo7Q JtF2 KVjt;1;YwBoAGEAcgBsAG8AdAB0AGUALgBoAHUAbgB0AC0AZwByAHUAYgBiAGUAQABzAHUAbgBkAGEAeQAtAHQAaQBtAGUAcwAuAGMAbwAuAHUAawA=;Sosha1_v1;7;{F78BB28B-407A-4F86-A12E-7858EB212295};cABoAGkAbABAAGYAcgB1AGkAdAB5AHMAbwBsAHUAdABpAG8AbgBzAC4AYwBvAG0A;Thu, 03 Sep 2009 17:16:08 GMT;VABlAHMAdAA= x-cr-puzzleid: {F78BB28B-407A-4F86-A12E-7858EB212295} This is a multipart message in MIME format. ------=_NextPart_000_01C2_01CA2CC2.9D9585A0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit

    Read the article

  • Problems with ipsec betwen Cisco ASA 5505 and Juniper ssg5

    - by Oskar Kjellin
    I am trying to set up an ipsec tunnel between our ASA 5505 and a Juniper ssg5. The tunnel is up and running, but I cannot get any data through it. The local network I am on is 172.16.1.0 and the remote is 192.168.70.0. But I cannot ping anything on their netowork. I receive a "Phase 2 OK" when I set up the ipsec. I think this is the part of the config that is applicable. It seems like the data is not routed through the tunnel, but I am not sure... object network our-network subnet 172.16.1.0 255.255.255.0 object network their-network subnet 192.168.70.0 255.255.255.0 access-list outside_cryptomap extended permit ip object our-network object their-network crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer THEIR_IP crypto map outside_map 1 set ikev1 phase1-mode aggressive crypto map outside_map 1 set ikev1 transform-set ESP-3DES-MD5 crypto map outside_map 1 set ikev2 pre-shared-key ***** crypto map outside_map 1 set reverse-route crypto map outside_map interface outside webvpn group-policy GroupPolicy_THEIR_IP internal group-policy GroupPolicy_THEIR_IP attributes vpn-filter value outside_cryptomap ipv6-vpn-filter none vpn-tunnel-protocol ikev1 tunnel-group THEIR_IP type ipsec-l2l tunnel-group THEIR_IP general-attributes default-group-policy GroupPolicy_THEIR_IP tunnel-group THEIR_IP ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key *****

    Read the article

  • Strange performance differences in read/write from/to USB flash drive

    - by Mario De Schaepmeester
    When copying files from my 8GB USB 2.0 flash drive with Windows 7 to a traditional hard drive, the average speed is between 25 and 30 MB/s. When doing the reverse, copying to the USB drive, the speed is 5MB/s average. I have tested this with about 4.5GB of files, a mixture of smaller and larger ones. The observations were the same on both FAT32 and exFAT file systems on the USB drive, NTFS on the internal hard disk. I don't think I can be mistaken in saying that flash memory has a lot higher performance than a spinning hard drive in both terms of reading and writing. For both memory types, reading should be faster than writing too. Now I wonder, how can it be that copying files from a fast read memory to a faster write memory is actually slower than copying files from a fast read memory to a slow write memory? I think that the files are stored in RAM before being copied over too, and there's caching as well, but I don't see how even that could tip the balance. It can only be in the advantage of writing to the USB drive, since it is "closer" to the SATA system than the USB port and it will receive data from the internal SATA HDD faster. Perhaps my way of thinking is all wrong or it just depends on the manufacturer of the USB pen. But I am curious.

    Read the article

  • Connecting to RDS database from EC2 instance using bind9 CNAME alias

    - by mptre
    I'm trying to get internal DNS up and running on a EC2 instance. The main goal is to be able to define CNAME aliases for other AWS services. For example: Instead of using the RDS endpoint, which might change over time, an alias mysql.company.int can be used instead. I'm using bind9 and here's my config files: /etc/bind/named.conf.local zone "company.int" { type master; file "/etc/bind/db.company.int"; }; /etc/bind/db.company.int ; $TTL 3600 @ IN SOA company.int. company.localhost. ( 20120617 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS company.int. @ IN A 127.0.0.1 @ IN AAAA ::1 ; CNAME mysql IN CNAME xxxx.eu-west-1.rds.amazonaws.com. The dig command ensures me my alias is working as excepted: $ dig mysql.company.int ... ;; ANSWER SECTION: mysql.company.int. 3600 IN CNAME xxxx.eu-west-1.rds.amazonaws.com. xxxx.eu-west-1.rds.amazonaws.com. 60 IN CNAME ec2-yyy-yy-yy-yyy.eu-west-1.compute.amazonaws.com. ec2-yyy-yy-yy-yyy.eu-west-1.compute.amazonaws.com. 589575 IN A zzz.zz.zz.zzz ... As far as I can understand a reverse zone isn't needed for a simple CNAME alias. However when I try to connect to MySQL using my newly created alias the operation is giving me a timeout. $ mysql -uuser -ppassword -hmysql.company.int ERROR 2003 (HY000): Can't connect to MySQL server on 'mysql.company.int' (110) Any ideas? Thanks in advantage!

    Read the article

  • ssh keys rejected each day

    - by EddyR
    I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

    Read the article

  • Outlook and IMAP - Outlook doesn't allow the Drafts and Trash folders to sync with the respective IMAP folders

    - by Matt
    I'm using Outlook 2007 and Outlook 2010 against an IMAP server (the problem exists across many, like Gmail, you name it). Outlook lets you set your Outlook "Sent" folder to map to the IMAP server's Sent folder (the other choice is to map your Outlook Sent to your Personal Folders Sent) - this is good. When you send a message from Outlook and then look in the sent folder of the IMAP server (e.g. from a different client or from a browser), the messages are there. This is the behavior I want. Outlook does NOT support the same behavior for Drafts and Trash. In both cases, items deleted (or Drafts saved) in Outlook go in to Outlook's local folders and do NOT show on the IMAP server's Trash or Drafts folders. Same problem in reverse. Thunderbird on the other hand does support the proper mapping of Drafts, Sent and Trash. I expected this to be IMAP-specific but it appears to be client specific. What does Outlook implement it this way and is there a workaround?

    Read the article

  • Emails going to Junk for Hotmail recipients

    - by David George
    We send daily mass emails to our customers (~30,000+ emails per day). We have problems with Hotmail users receiving our emails. Sometimes the email goes to the Junk folder, but often it will got to their inbox, but the content is blocked so the user sees a message saying "This email was blocked and may be dangerous". If an email is sent to GMAIL it is usually not blocked, but it does show up as from "Uknown" instead of the company. Please be advised I've done the following: 1. No RBLs Checked on - http://multirbl.valli.org/ 2. We do have SPF records published 3. We do have reverse DNS setup 4. Our company even signed up for the Junk Mail Reports Program at Hotmail Here is a sample header, I've noticed the X-SID-Result and the X-AUTH-Result both FAIL every time at Hotmail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MTtTQ0w9MQ== X-Message-Status: n:0 X-SID-Result: Fail X-AUTH-Result: FAIL X-Message-Info: JGTYoYF78jFqAaC29fBlDlD/ZI36+S6WoFmkQN10UxWFe1xLHhP+rDthGRZM87uHYM926hUBS+s0q46Yx9y6jdurhN6fx0bK Received: from privatecompany.com ([WanIPAddress]) by col0-mc3-f30.Col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Wed, 5 May 2010 08:41:27 -0700 X-AuditID: ac10fe93-000013bc00000534-46-4be191a1618e Received: from INTERNAL-Email-SERVER([InternalIPAddress]) by privatecompany.com with Microsoft SMTPSVC(6.0.3790.4675); Wed, 5 May 2010 11:41:21 -0400 From: Private Company, Inc.<[email protected]> To: [email protected] Message-Id: <[email protected]> Subject: Date: Wed, 5 May 2010 11:42:46 -0400 MIME-Version: 1.0 Reply-To: [email protected] Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 8bit X-Brightmail-Tracker: AAAAAA== Return-Path: [email protected] X-OriginalArrivalTime: 05 May 2010 15:41:27.0837 (UTC) FILETIME=[6D06E4D0:01CAEC69]

    Read the article

  • multiple streaming servers behind a Bastion Host

    - by Bond
    I am using open source streaming server Red5 on multiple servers. Which are running behind a bastion host. the world knows these sites as http://site1.mydomain.com http://site2.mydomain.com http://site3.mydomain.com http://site4.mydomain.com To reach the front end server is using Apache Reverse Proxy. I am also having video streaming on each of these websites using rtmp. To be able to reach the streaming server I embed a javascript in HTML pages as follows Code: <embed ..... var="rtmp://site1.my_domain.com" > the problem is the website are many site1.mydomain.com site2.mydomain.com site3.mydomain.com site4.mydomain.com each on a separate physical server. Each of these four have their own Red5 installations the front end to each of these four is a common Bastion Host. If I run rtmp on each of the subdomains at a different port how will I make sure a request such as rtmp://site1.mydomain.com rtmp://site2.mydomain.com goes to their respective servers. from the front end server. What do I need to handle in this case ? IPTABLES came to mind instantly but from the client browser on internet when some one requests rtmp://site1.mydomain.com how will I make sure this rtmp request is mapped to a port different than 1935 as there are three other streaming servers which are also to respond to their respective requests ?

    Read the article

  • Database – Beginning with Cloud Database As A Service

    - by Pinal Dave
    I love my weekend projects. Everybody does different activities in their weekend – like traveling, reading or just nothing. Every weekend I try to do something creative and different in the database world. The goal is I learn something new and if I enjoy my learning experience I share with the world. This weekend, I decided to explore Cloud Database As A Service – Morpheus. In my career I have managed many databases in the cloud and I have good experience in managing them. I should highlight that today’s applications use multiple databases from SQL for transactions and analytics, NoSQL for documents, In-Memory for caching to Indexing for search.  Provisioning and deploying these databases often require extensive expertise and time.  Often these databases are also not deployed on the same infrastructure and can create unnecessary latency between the application layer and the databases.  Not to mention the different quality of service based on the infrastructure and the service provider where they are deployed. Moreover, there are additional problems that I have experienced with traditional database setup when hosted in the cloud: Database provisioning & orchestration Slow speed due to hardware issues Poor Monitoring Tools High network latency Now if you have a great software and expert network engineer, you can continuously work on above problems and overcome them. However, not every organization have the luxury to have top notch experts in the field. Now above issues are related to infrastructure, but there are a few more problems which are related to software/application as well. Here are the top three things which can be problems if you do not have application expert: Replication and Clustering Simple provisioning of the hard drive space Automatic Sharding Well, Morpheus looks like a product build by experts who have faced similar situation in the past. The product pretty much addresses all the pain points of developers and database administrators. What is different about Morpheus is that it offers a variety of databases from MySQL, MongoDB, ElasticSearch to Reddis as a service.  Thus users can pick and chose any combination of these databases.  All of them can be provisioned in a matter of minutes with a simple and intuitive point and click user interface.  The Morpheus cloud is built on Solid State Drives (SSD) and is designed for high-speed database transactions.  In addition it offers a direct link to Amazon Web Services to minimize latency between the application layer and the databases. Here are the few steps on how one can get started with Morpheus. Follow along with me.  First go to http://www.gomorpheus.com and register for a new and free account. Step 1: Signup It is very simple to signup for Morpheus. Step 2: Select your database   I use MySQL for my daily routine, so I have selected MySQL. Upon clicking on the big red button to add Instance, it prompted a dialogue of creating a new instance.   Step 3: Create User Now we just have to create a user in our portal which we will use to connect to a database hosted at Morpheus. Click on your database instance and it will bring you to User Screen. Over here you will notice once again a big red button to create a new user. I created a user with my first name.   Step 4: Configure your MySQL client I used MySQL workbench and connected to MySQL instance, which I had created with an IP address and user.   That’s it! You are connecting to MySQL instance. Now you can create your objects just like you would create on your local box. You will have all the features of the Morpheus when you are working with your database. Dashboard While working with Morpheus, I was most impressed with its dashboard. In future blog posts, I will write more about this feature.  Also with Morpheus you use the same process for provisioning and connecting with other databases: MongoDB, ElasticSearch and Reddis. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

    - by sohum
    So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

    Read the article

  • Registering publicly Mail server and Web server in a free dns server

    - by Bruno Vieira
    I'm trying to host the e-mails and the site of our company into our private server. I've already followed the Gentoo Virtual Mailhosting System with Postfix Guide and my mail server is working (actually it sends mails for the local users and for external users it goes to spam) and know how to set an Apache 2 server. What I don't know (and I mean really don't) is how to make them public. I did some research and found that I should ask my ISP to change the reverse DNS to my company domain in order to prevent my mails to be marked as spam, they are doing. I already know I have to configure a DNS Server, it seems like my register provider already has one but I don't know how I can configure CNET, A, MX, TXT and all those tags (Is it tags the name?) and If I must do some other configuration on my server. My Server: Linux mail 3.2.21-gentoo #1 SMP My /etc/hosts: 127.0.0.1 mail.example.com.br example example.com.br ::1 mail.example.com.br mail example.com.br My /etc/conf.d/hostname: hostname ="mail" What am I missing? If there's a guide about how to configure I would really be grate. Thanks in advance for the help. Cheers

    Read the article

  • My Take on Hadoop World 2011

    - by Jean-Pierre Dijcks
    I’m sure some of you have read pieces about Hadoop World and I did see some headlines which were somewhat, shall we say, interesting? I thought the keynote by Larry Feinsmith of JP Morgan Chase & Co was one of the highlights of the conference for me. The reason was very simple, he addressed some real use cases outside of internet and ad platforms. The following are my notes, since the keynote was recorded I presume you can go and look at Hadoopworld.com at some point… On the use cases that were mentioned: ETL – how can I do complex data transformation at scale Doing Basel III liquidity analysis Private banking – transaction filtering to feed [relational] data marts Common Data Platform – a place to keep data that is (or will be) valuable some day, to someone, somewhere 360 Degree view of customers – become pro-active and look at events across lines of business. For example make sure the mortgage folks know about direct deposits being stopped into an account and ensure the bank is pro-active to service the customer Treasury and Security – Global Payment Hub [I think this is really consolidation of data to cross reference activity across business and geographies] Data Mining Bypass data engineering [I interpret this as running a lot of a large data set rather than on samples] Fraud prevention – work on event triggers, say a number of failed log-ins to the website. When they occur grab web logs, firewall logs and rules and start to figure out who is trying to log in. Is this me, who forget his password, or is it someone in some other country trying to guess passwords Trade quality analysis – do a batch analysis or all trades done and run them through an analysis or comparison pipeline One of the key requests – if you can say it like that – was for vendors and entrepreneurs to make sure that new tools work with existing tools. JPMC has a large footprint of BI Tools and Big Data reporting and tools should work with those tools, rather than be separate. Security and Entitlement – how to protect data within a large cluster from unwanted snooping was another topic that came up. I thought his Elephant ears graph was interesting (couldn’t actually read the points on it, but the concept certainly made some sense) and it was interesting – when asked to show hands – how the audience did not (!) think that RDBMS and Hadoop technology would overlap completely within a few years. Another interesting session was the session from Disney discussing how Disney is building a DaaS (Data as a Service) platform and how Hadoop processing capabilities are mixed with Database technologies. I thought this one of the best sessions I have seen in a long time. It discussed real use case, where problems existed, how they were solved and how Disney planned some of it. The planning focused on three things/phases: Determine the Strategy – Design a platform and evangelize this within the organization Focus on the people – Hire key people, grow and train the staff (and do not overload what you have with new things on top of their day-to-day job), leverage a partner with experience Work on Execution of the strategy – Implement the platform Hadoop next to the other technologies and work toward the DaaS platform This kind of fitted with some of the Linked-In comments, best summarized in “Think Platform – Think Hadoop”. In other words [my interpretation], step back and engineer a platform (like DaaS in the Disney example), then layer the rest of the solutions on top of this platform. One general observation, I got the impression that we have knowledge gaps left and right. On the one hand are people looking for more information and details on the Hadoop tools and languages. On the other I got the impression that the capabilities of today’s relational databases are underestimated. Mostly in terms of data volumes and parallel processing capabilities or things like commodity hardware scale-out models. All in all I liked this conference, it was great to chat with a wide range of people on Oracle big data, on big data, on use cases and all sorts of other stuff. Just hope they get a set of bigger rooms next time… and yes, I hope I’m going to be back next year!

    Read the article

  • Windows Server 2008 R2 DNS - One IP, multiple servers

    - by Blu Dragon
    I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

    Read the article

  • ssh connection slow when using @hostname.com but now when using @ipaddress

    - by Alex Recarey
    When connecting to a Debian server using ssh, if I use [email protected] (the IP address of hte server) the connection is instant. If however I use [email protected] (a DNS redirected to the IP address of the server) the ssh connection hangs for a 20 seconds before connecting successfully. The ssh logs show the following: [alex@alex home]$ ssh -v -v [email protected] OpenSSH_5.5p1, OpenSSL 1.0.0c-fips 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 and here it hangs during 20 seconds before continuing. I think it might have something to do with reverse DNS or similar (the server does not really "know" it's name is hostname.com, it just has that DNS rediriected to its IP address). I have added the following options to /etc/ssh/sshd_config: UseDNS no GSSAPIAuthentication no to no effect. The server's DNS records in /etc/resolv.conf are configured correctly: ping hostname.com PING sub.domain.com (X.X.X.X) 56(84) bytes of data. 64 bytes from replicant (X.X.X.X): icmp_seq=1 ttl=64 time=0.029 ms 64 bytes from replicant (X.X.X.X): icmp_seq=2 ttl=64 time=0.050 ms?s Thanks for the help. Solution: It seems the DSL router my ISP saddled me with was causing the trouble. Changing my DNS server from 192.168.1.1 (router's IP) to google's (8.8.8.8, always good to know when you are in a hurry) instantly solved the connection delay problem. I am guessing that the 50€ router provided does not cache DNS entries, although I don't understand why pinging the DNS address had no delay, and 20 seconds is too long of a wait, even for uncached DNS. Tnanks again for the help!

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >