Search Results

Search found 10391 results on 416 pages for 'sys dm exec requests'.

Page 92/416 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• cannot connect with huawei e173 after upgrade to 12.10 using network manager

  - by user104195

  Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

  Read the article

• A brief introduction to BRM and architecture

  - by Yani Miguel

  Oracle Communications Billing and Revenue Management (Oracle BRM) is the telcos industry´s leading solution intended for communications service providers. This post encourages to know BRM starting with the basics. History Portal was a billing and revenue managament solution to communications industry created by Portal Software. In 2006 Oracle acquired Portal Software and the solution was renamed BRM. Today Oracle BRM is the first end-to-end packaged enterprise software suite for the communications industry, however BRM is just one more product in the catalog of OSS solutions that Oracle offers. BRM can bill and manage all communications services including wireline, wireless, broadband, cable, voice over IP, IPTV, music, and video. BRM Architecture BRM´s architecture consists of 4 layers or tiers. Through these layers are the data, bussines logic and interfaces to connect graphical client tools.Application tier This layer provides GUI client tools enabling communication to other layers through open APIs. Some BRM client applications are: Customer Center Pricing Center Universal Event Loader Web Server BRM Billing Application Collections Center Permissioning Center Furthermore, this layer is where are provided real-time external events. Bussines Process Tier Although all layers are equally important, I think it deserves more atention because in this tier BRM functionality is implemented. All functions that give life to BRM are in this layer coded in C language called Opcodes (System Processes in the image). Any changes or additional functionality should be made here, so when we try to customize the product, we will most of the time programming in this layer (Business Policies in the image).Bussines Process Tier Features: Implements Portal system functionalityValidates data from the application tierModifies Portal behavior through business policies. Business policies can by customized.Triggers external systems using event notification. Object Tier This layer is responsible for transfer the BRM requests into database language and translate BRM requests into external system requests. Without it, the business logic (data from Bussines Process Tier) could not be understood by the relational database. Data tier Data tier is responsable for the storage of BRM database and other external systems databases. External systems include credit card, tax, and directory servers. Finally, It's important to note that BRM is designed to easily integrate with the following solutions:AIA 2.4 Siebel CRM E-Business Suite - G/L onlyCommunications Services Gatekeeper Oracle BI Publisher. Personally, I think that BRM could improve migrating client-server architecture to a fully web platform that works with Oracle Middleware like any product of the Fusion Middleware family. Hopefully there are already initiatives in this area.

  Read the article

• Gateway IP for eth0 and gateway IP for pptp vpn are same

  - by user286630

  My problem is.. 1) I'm using laptop at school. 2) In school, the default gateway for ethernet is 192.168.1.1. 3) I want to connect to a pptp vpn server. The gateway over the vpn connection is also 192.68.1.1. (The VPN server assigns 192.168.100.1 to my laptop and I confirmed that it is not used in school.) In this situation, there is no problem in Windows 7. I think it is enough smart to distinguish two different gateways with the same IP. All connection requests may be forwarded to the vpn gateway. But, in Ubuntu, I cannot access a file server in the remote site. I guess every connection request is forwarded to the ethernet gateway. How can I send all connection requests to the vpn gateway whose IP is same as the ethernet gateway?

  Read the article

• Release Notes for 9/6/2012

  Below are the release notes from today's deployment. More performance improvements around inline diffs – this time in the pull request view Fixed an issue where sending pull requests was not generating notification emails Fixed some cosmetic issues around viewing file diffs in commit changesets and pull requests Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @mgroves84

  Read the article

• Methods to Manage/Document "one-off" Reports

  - by Jason Holland

  I'm a programmer that also does database stuff and I get a lot of so-called one-time report requests and recurring report requests. I work at a company that has a SQL Server database that we integrate third-party data with and we also have some third-party vendors that we have to use their proprietary reporting system to extract data in flat file format from that we don't integrate into SQL Server for security reasons. To generate many of these reports I have to query data from various systems, write small scripts to combine data from the separate systems, cry, pull my hair, curse the last guy's name that made the report before me, etc. My question is, what are some good methods for documenting the steps taken to generate these reports so the next poor soul that has to do them won't curse my name? As of now I just have a folder with subfolders per project with the selects and scripts that generated the last report but that seems like a "poor man's" solution. :)

  Read the article

• SQLAuthority News – SQL Server Wait Stats – eBook to Download on Kindle – Answer to FREE PDF Download Request

  - by pinaldave

  Being a book author is a completely new experience for me. I am yet to come across the issues faced by expert book authors. I assume that these interesting issues can be routine ones for expert book authors. One of the biggest requests I am getting for my SQL Server Wait Stats [Amazon] | [Flipkart] | [Kindle] book is my humble attempt to write a book. This is our very first experiment, and the book is beginning of the subject of SQL Server Wait Stats; we will come up with a new version of the book later next year when we have enough information for the SQL Server 2012 version. Following are the top 2 requests that I keep on receiving in emails, on blogs, Twitter, and Facebook. “Please send us FREE PDF of your book so we do not have to purchase it.” “If you can share with us the eBook (free and downloadable) format of your book, we will share it with everybody we know and you will get additional exposure.” Here is my response for the abovementioned requests: If you really need my book and cannot purchase it due to financial trouble, then feel free to let me know and I will purchase it myself and ship it to you. If you are in a country where the print book not available, then you can buy the Kindle book, which is available online in any country, and you can just read it on your computer and mobile devices. You DO NOT have to own a Kindle to read a Kindle format book. You can freely download Kindle software on your desired format and purchase the book online. For next 5 days, the kindle book is available at 3.99 in USA, and in other countries, the price is anywhere between 3.99 and 5.99. The price will go up by USD 2 everywhere across the world after 1st November, 2011. Here is the link to download Kindle Software for free PC, WP7, and in marketplace for various other mobile devices. I thank you for giving warm response to SQL Server Wait Stats book. I am motivated to write the next expanded version of this book. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• PHPPgAdmin not working in Ubuntu 14.04

  - by Adam

  After a fresh install of Ubuntu 14.04, I've installed postgresql and phppgadmin from the Ubuntu repos. I am using the Apache2 webserver. PHP is working fine in the webserver, as is PHPMyAdmin, but PHPPgAdmin is not working. When I try to access it at localhost/phppgadmin, I get a 404 message. I've tried creating a symlink in /var/www to the phppgadmin content, but that doesn't seem to work. How do I fix this? EDIT: note that I am using a local proxy server (squid) through which I funnel all my online traffic. While this may be part of the problem, I would be surprised if it was, because I am still on the same machine as phppgadmin and the requests logged in the apache access log indicate that incoming requests for the page are coming from the local machine (which is allowed in the policies for phppgadmin, if I understand things correctly).

  Read the article

• What are the warning signs of impending doom to watch out for on a project?

  - by ConroyP

  Having worked on a failed project is one of the few things that most programmers have in common, regardless of language used, industry or experience. These projects can be great learning experiences, soul-crushing disasters (or both!), and can occur for a multitude of reasons: upper management change of heart under-skilled / under-resourced team emergence of superior competitor during dev cycle over/under management Once you've worked on a couple of such projects, is it possible to recognise at an early stage exactly when a project is doomed to fail? For me, a big sign is having a hard & fast external deadline combined with feature creep. I've seen projects which were well planned out and proceeding right on schedule go horribly off the rails once the late feature requests started to roll in and get added to the final "deliverable". The proposers of these requests earned the nickname of Columbo, due to rarely leaving the room without asking for "just one more thing". What are the warning signs you look out for that set off the alarm bells of impending doom in your head?

  Read the article

• How Visual Studio 2010 and Team Foundation Server enable Compliance

  - by Martin Hinshelwood

  One of the things that makes Team Foundation Server (TFS) the most powerful Application Lifecycle Management (ALM) platform is the traceability it provides to those that use it. This traceability is crucial to enable many companies to adhere to many of the Compliance regulations to which they are bound (e.g. CFR 21 Part 11 or Sarbanes–Oxley.)   From something as simple as relating Tasks to Check-in’s or being able to see the top 10 files in your codebase that are causing the most Bugs, to identifying which Bugs and Requirements are in which Release. All that information is available and more in TFS. Although all of this tradability is available within TFS you do need to understand that it is not for free. Well… I say that, but if you are using TFS properly you will have this information with no additional work except for firing up the reporting. Using Visual Studio ALM and Team Foundation Server you can relate every line of code changes all the way up to requirements and back down through Test Cases to the Test Results. Figure: The only thing missing is Build In order to build the relationship model below we need to examine how each of the relationships get there. Each member of your team from programmer to tester and Business Analyst to Business have their roll to play to knit this together. Figure: The relationships required to make this work can get a little confusing If Build is added to this to relate Work Items to Builds and with knowledge of which builds are in which environments you can easily identify what is contained within a Release. Figure: How are things progressing Along with the ability to produce the progress and trend reports the tractability that is built into TFS can be used to fulfil most audit requirements out of the box, and augmented to fulfil the rest. In order to understand the relationships, lets look at each of the important Artifacts and how they are associated with each other… Requirements – The root of all knowledge Requirements are the thing that the business cares about delivering. These could be derived as User Stories or Business Requirements Documents (BRD’s) but they should be what the Business asks for. Requirements can be related to many of the Artifacts in TFS, so lets look at the model: Figure: If the centre of the world was a requirement We can track which releases Requirements were scheduled in, but this can change over time as more details come to light. Figure: Who edited the Requirement and when There is also the ability to query Work Items based on the History of changed that were made to it. This is particularly important with Requirements. It might not be enough to say what Requirements were completed in a given but also to know which Requirements were ever assigned to a particular release. Figure: Some magic required, but result still achieved As an augmentation to this it is also possible to run a query that shows results from the past, just as if we had a time machine. You can take any Query in the system and add a “Asof” clause at the end to query historical data in the operational store for TFS. select <fields> from WorkItems [where <condition>] [order by <fields>] [asof <date>] Figure: Work Item Query Language (WIQL) format In order to achieve this you do need to save the query as a *.wiql file to your local computer and edit it in notepad, but one imported into TFS you run it any time you want. Figure: Saving Queries locally can be useful All of these Audit features are available throughout the Work Item Tracking (WIT) system within TFS. Tasks – Where the real work gets done Tasks are the work horse of the development team, but they only as useful as Excel if you do not relate them properly to other Artifacts. Figure: The Task Work Item Type has its own relationships Requirements should be broken down into Tasks that the development team work from to build what is required by the business. This may be done by a small dedicated group or by everyone that will be working on the software team but however it happens all of the Tasks create should be a Child of a Requirement Work Item Type. Figure: Tasks are related to the Requirement Tasks should be used to track the day-to-day activities of the team working to complete the software and as such they should be kept simple and short lest developers think they are more trouble than they are worth. Figure: Task Work Item Type has a narrower purpose Although the Task Work Item Type describes the work that will be done the actual development work involves making changes to files that are under Source Control. These changes are bundled together in a single atomic unit called a Changeset which is committed to TFS in a single operation. During this operation developers can associate Work Item with the Changeset. Figure: Tasks are associated with Changesets   Changesets – Who wrote this crap Changesets themselves are just an inventory of the changes that were made to a number of files to complete a Task. Figure: Changesets are linked by Tasks and Builds   Figure: Changesets tell us what happened to the files in Version Control Although comments can be changed after the fact, the inventory and Work Item associations are permanent which allows us to Audit all the way down to the individual change level. Figure: On Check-in you can resolve a Task which automatically associates it Because of this we can view the history on any file within the system and see how many changes have been made and what Changesets they belong to. Figure: Changes are tracked at the File level What would be even more powerful would be if we could view these changes super imposed over the top of the lines of code. Some people call this a blame tool because it is commonly used to find out which of the developers introduced a bug, but it can also be used as another method of Auditing changes to the system. Figure: Annotate shows the lines the Annotate functionality allows us to visualise the relationship between the individual lines of code and the Changesets. In addition to this you can create a Label and apply it to a version of your version control. The problem with Label’s is that they can be changed after they have been created with no tractability. This makes them practically useless for any sort of compliance audit. So what do you use? Branches – And why we need them Branches are a really powerful tool for development and release management, but they are most important for audits. Figure: One way to Audit releases The R1.0 branch can be created from the Label that the Build creates on the R1 line when a Release build was created. It can be created as soon as the Build has been signed of for release. However it is still possible that someone changed the Label between this time and its creation. Another better method can be to explicitly link the Build output to the Build. Builds – Lets tie some more of this together Builds are the glue that helps us enable the next level of tractability by tying everything together. Figure: The dashed pieces are not out of the box but can be enabled When the Build is called and starts it looks at what it has been asked to build and determines what code it is going to get and build. Figure: The folder identifies what changes are included in the build The Build sets a Label on the Source with the same name as the Build, but the Build itself also includes the latest Changeset ID that it will be building. At the end of the Build the Build Agent identifies the new Changesets it is building by looking at the Check-ins that have occurred since the last Build. Figure: What changes have been made since the last successful Build It will then use that information to identify the Work Items that are associated with all of the Changesets Changesets are associated with Build and change the “Integrated In” field of those Work Items . Figure: Find all of the Work Items to associate with The “Integrated In” field of all of the Work Items identified by the Build Agent as being integrated into the completed Build are updated to reflect the Build number that successfully integrated that change. Figure: Now we know which Work Items were completed in a build Now that we can link a single line of code changed all the way back through the Task that initiated the action to the Requirement that started the whole thing and back down to the Build that contains the finished Requirement. But how do we know wither that Requirement has been fully tested or even meets the original Requirements? Test Cases – How we know we are done The only way we can know wither a Requirement has been completed to the required specification is to Test that Requirement. In TFS there is a Work Item type called a Test Case Test Cases enable two scenarios. The first scenario is the ability to track and validate Acceptance Criteria in the form of a Test Case. If you agree with the Business a set of goals that must be met for a Requirement to be accepted by them it makes it both difficult for them to reject a Requirement when it passes all of the tests, but also provides a level of tractability and validation for audit that a feature has been built and tested to order. Figure: You can have many Acceptance Criteria for a single Requirement It is crucial for this to work that someone from the Business has to sign-off on the Test Case moving from the  “Design” to “Ready” states. The Second is the ability to associate an MS Test test with the Test Case thereby tracking the automated test. This is useful in the circumstance when you want to Track a test and the test results of a Unit Test designed to test the existence of and then re-existence of a a Bug. Figure: Associating a Test Case with an automated Test Although it is possible it may not make sense to track the execution of every Unit Test in your system, there are many Integration and Regression tests that may be automated that it would make sense to track in this way. Bug – Lets not have regressions In order to know wither a Bug in the application has been fixed and to make sure that it does not reoccur it needs to be tracked. Figure: Bugs are the centre of their own world If the fix to a Bug is big enough to require that it is broken down into Tasks then it is probably a Requirement. You can associate a check-in with a Bug and have it tracked against a Build. You would also have one or more Test Cases to prove the fix for the Bug. Figure: Bugs have many associations This allows you to track Bugs / Defects in your system effectively and report on them. Change Request – I am not a feature In the CMMI Process template Change Requests can also be easily tracked through the system. In some cases it can be very important to track Change Requests separately as an Auditor may want to know what was changed and who authorised it. Again and similar to Bugs, if the Change Request is big enough that it would require to be broken down into Tasks it is in reality a new feature and should be tracked as a Requirement. Figure: Make sure your Change Requests only Affect Requirements and not rewrite them Conclusion Visual Studio 2010 and Team Foundation Server together provide an exceptional Application Lifecycle Management platform that can help your team comply with even the harshest of Compliance requirements while still enabling them to be Agile. Most Audits are heavy on required documentation but most of that information is captured for you as long a you do it right. You don’t even need every team member to understand it all as each of the Artifacts are relevant to a different type of team member. Business Analysts manage Requirements and Change Requests Programmers manage Tasks and check-in against Change Requests and Bugs Testers manage Bugs and Test Cases Build Masters manage Builds Although there is some crossover there are still rolls or “hats” that are worn. Do you thing this is all achievable? Have I missed anything that you think should be there?

  Read the article

• EM12c Release 4: Database as a Service Enhancements

  - by Adeesh Fulay

  Oracle Enterprise Manager 12.1.0.4 (or simply put EM12c R4) is the latest update to the product. As previous versions, this release provides tons of enhancements and bug fixes, attributing to improved stability and quality. One of the areas that is most exciting and has seen tremendous growth in the last few years is that of Database as a Service. EM12c R4 provides a significant update to Database as a Service. The key themes are: Comprehensive Database Service Catalog (includes single instance, RAC, and Data Guard) Additional Storage Options for Snap Clone (includes support for Database feature CloneDB) Improved Rapid Start Kits Extensible Metering and Chargeback Miscellaneous Enhancements 1. Comprehensive Database Service Catalog Before we get deep into implementation of a service catalog, lets first understand what it is and what benefits it provides. Per ITIL, a service catalog is an exhaustive list of IT services that an organization provides or offers to its employees or customers. Service catalogs have been widely popular in the space of cloud computing, primarily as the medium to provide standardized and pre-approved service definitions. There is already some good collateral out there that talks about Oracle database service catalogs. The two whitepapers i recommend reading are: Service Catalogs: Defining Standardized Database Service High Availability Best Practices for Database Consolidation: The Foundation for Database as a Service [Oracle MAA] EM12c comes with an out-of-the-box service catalog and self service portal since release 1. For the customers, it provides the following benefits: Present a collection of standardized database service definitions, Define standardized pools of hardware and software for provisioning, Role based access to cater to different class of users, Automated procedures to provision the predefined database definitions, Setup chargeback plans based on service tiers and database configuration sizes, etc Starting Release 4, the scope of services offered via the service catalog has been expanded to include databases with varying levels of availability - Single Instance (SI) or Real Application Clusters (RAC) databases with multiple data guard based standby databases. Some salient points of the data guard integration: Standby pools can now be defined across different datacenters or within the same datacenter as the primary (this helps in modelling the concept of near and far DR sites) The standby databases can be single instance, RAC, or RAC One Node databases Multiple standby databases can be provisioned, where the maximum limit is determined by the version of database software The standby databases can be in either mount or read only (requires active data guard option) mode All database versions 10g to 12c supported (as certified with EM 12c) All 3 protection modes can be used - Maximum availability, performance, security Log apply can be set to sync or async along with the required apply lag The different service levels or service tiers are popularly represented using metals - Platinum, Gold, Silver, Bronze, and so on. The Oracle MAA whitepaper (referenced above) calls out the various service tiers as defined by Oracle's best practices, but customers can choose any logical combinations from the table below:  Primary  Standby [1 or more]  EM 12cR4  SI  -  SI  SI  RAC -  RAC SI  RAC RAC  RON -  RON RON where RON = RAC One Node is supported via custom post-scripts in the service template A sample service catalog would look like the image below. Here we have defined 4 service levels, which have been deployed across 2 data centers, and have 3 standardized sizes. Again, it is important to note that this is just an example to get the creative juices flowing. I imagine each customer would come up with their own catalog based on the application requirements, their RTO/RPO goals, and the product licenses they own. In the screenwatch titled 'Build Service Catalog using EM12c DBaaS', I walk through the complete steps required to setup this sample service catalog in EM12c. 2. Additional Storage Options for Snap Clone In my previous blog posts, i have described the snap clone feature in detail. Essentially, it provides a storage agnostic, self service, rapid, and space efficient approach to solving your data cloning problems. The net benefit is that you get incredible amounts of storage savings (on average 90%) all while cloning databases in a matter of minutes. Space and Time, two things enterprises would love to save on. This feature has been designed with the goal of providing data cloning capabilities while protecting your existing investments in server, storage, and software. With this in mind, we have pursued with the dual solution approach of Hardware and Software. In the hardware approach, we connect directly to your storage appliances and perform all low level actions required to rapidly clone your databases. While in the software approach, we use an intermediate software layer to talk to any storage vendor or any storage configuration to perform the same low level actions. Thus delivering the benefits of database thin cloning, without requiring you to drastically changing the infrastructure or IT's operating style. In release 4, we expand the scope of options supported by snap clone with the addition of database CloneDB. While CloneDB is not a new feature, it was first introduced in 11.2.0.2 patchset, it has over the years become more stable and mature. CloneDB leverages a combination of Direct NFS (or dNFS) feature of the database, RMAN image copies, sparse files, and copy-on-write technology to create thin clones of databases from existing backups in a matter of minutes. It essentially has all the traits that we want to present to our customers via the snap clone feature. For more information on cloneDB, i highly recommend reading the following sources: Blog by Tim Hall: Direct NFS (DNFS) CloneDB in Oracle Database 11g Release 2 Oracle OpenWorld Presentation by Cern: Efficient Database Cloning using Direct NFS and CloneDB The advantages of the new CloneDB integration with EM12c Snap Clone are: Space and time savings Ease of setup - no additional software is required other than the Oracle database binary Works on all platforms Reduce the dependence on storage administrators Cloning process fully orchestrated by EM12c, and delivered to developers/DBAs/QA Testers via the self service portal Uses dNFS to delivers better performance, availability, and scalability over kernel NFS Complete lifecycle of the clones managed by EM12c - performance, configuration, etc 3. Improved Rapid Start Kits DBaaS deployments tend to be complex and its setup requires a series of steps. These steps are typically performed across different users and different UIs. The Rapid Start Kit provides a single command solution to setup Database as a Service (DBaaS) and Pluggable Database as a Service (PDBaaS). One command creates all the Cloud artifacts like Roles, Administrators, Credentials, Database Profiles, PaaS Infrastructure Zone, Database Pools and Service Templates. Once the Rapid Start Kit has been successfully executed, requests can be made to provision databases and PDBs from the self service portal. Rapid start kit can create complex topologies involving multiple zones, pools and service templates. It also supports standby databases and use of RMAN image backups. The Rapid Start Kit in reality is a simple emcli script which takes a bunch of xml files as input and executes the complete automation in a matter of seconds. On a full rack Exadata, it took only 40 seconds to setup PDBaaS end-to-end. This kit works for both Oracle's engineered systems like Exadata, SuperCluster, etc and also on commodity hardware. One can draw parallel to the Exadata One Command script, which again takes a bunch of inputs from the administrators and then runs a simple script that configures everything from network to provisioning the DB software. Steps to use the kit: The kit can be found under the SSA plug-in directory on the OMS: EM_BASE/oracle/MW/plugins/oracle.sysman.ssa.oms.plugin_12.1.0.8.0/dbaas/setup It can be run from this default location or from any server which has emcli client installed For most scenarios, you would use the script dbaas/setup/database_cloud_setup.py For Exadata, special integration is provided to reduce the number of inputs even further. The script to use for this scenario would be dbaas/setup/exadata_cloud_setup.py The database_cloud_setup.py script takes two inputs: Cloud boundary xml: This file defines the cloud topology in terms of the zones and pools along with host names, oracle home locations or container database names that would be used as infrastructure for provisioning database services. This file is optional in case of Exadata, as the boundary is well know via the Exadata system target available in EM. Input xml: This file captures inputs for users, roles, profiles, service templates, etc. Essentially, all inputs required to define the DB services and other settings of the self service portal. Once all the xml files have been prepared, invoke the script as follows for PDBaaS: emcli @database_cloud_setup.py -pdbaas -cloud_boundary=/tmp/my_boundary.xml -cloud_input=/tmp/pdb_inputs.xml          The script will prompt for passwords a few times for key users like sysman, cloud admin, SSA admin, etc. Once complete, you can simply log into EM as the self service user and request for databases from the portal. More information available in the Rapid Start Kit chapter in Cloud Administration Guide.  4. Extensible Metering and Chargeback  Last but not the least, Metering and Chargeback in release 4 has been made extensible in all possible regards. The new extensibility features allow customer, partners, system integrators, etc to : Extend chargeback to any target type managed in EM Promote any metric in EM as a chargeback entity Extend list of charge items via metric or configuration extensions Model abstract entities like no. of backup requests, job executions, support requests, etc  A slew of emcli verbs have also been added that allows administrators to create, edit, delete, import/export charge plans, and assign cost centers all via the command line. More information available in the Chargeback API chapter in Cloud Administration Guide. 5. Miscellaneous Enhancements There are other miscellaneous, yet important, enhancements that are worth a mention. These mostly have been asked by customers like you. These are: Custom naming of DB Services Self service users can provide custom names for DB SID, DB service, schemas, and tablespaces Every custom name is validated for uniqueness in EM 'Create like' of Service Templates Now creating variants of a service template is only a click away. This would be vital when you publish service templates to represent different database sizes or service levels. Profile viewer View the details of a profile like datafile, control files, snapshot ids, export/import files, etc prior to its selection in the service template Cleanup automation - for failed and successful requests Single emcli command to cleanup all remnant artifacts of a failed request Cleanup can be performed on a per request bases or by the entire pool As an extension, you can also delete successful requests Improved delete user workflow Allows administrators to reassign cloud resources to another user or delete all of them Support for multiple tablespaces for schema as a service In addition to multiple schemas, user can also specify multiple tablespaces per request I hope this was a good introduction to the new Database as a Service enhancements in EM12c R4. I encourage you to explore many of these new and existing features and give us feedback. Good luck! References: Cloud Management Page on OTN Cloud Administration Guide [Documentation] -- Adeesh Fulay (@adeeshf)

  Read the article

• Community Programming

  - by James Hill

  Background I just began working for a religious non-profit organization. As with most non-profits, the organization is resource-poor and has no IT department to speak of. In my two months here I've received 20 requests for websites, apps, and internal automation. Many of these 20 requests have merit and would benefit the organization. I'm a .net web developer and as such the open source community is relatively foreign to me... Question For the sake of this question, lets say I'm talking about building a single, large, website. Does software (web based, hopefully) exist that would allow me to post requirements and assets (graphics and CSS) for a site, and then invite programmers to participate in the sites development? As a simple example, I could post the requirements and data for the about us page and an individual would indicate that they could/would fulfill the requirement. Upon completion, they could upload the new source code to the shared repository (github).

  Read the article

• Explanation of the definition of interface inheritance as described in GoF book

  - by Geek

  I am reading the first chapter of the Gof book. Section 1.6 discusses about class vs interface inheritance: Class versus Interface Inheritance It's important to understand the difference between an object's class and its type. An object's class defines how the object is implemented.The class defines the object's internal state and the implementation of its operations.In contrast,an object's type only refers to its interface--the set of requests on which it can respond. An object can have many types, and objects of different classes can have the same type. Of course, there's a close relationship between class and type. Because a class defines the operations an object can perform, it also defines the object's type . When we say that an object is an instance of a class, we imply that the object supports the interface defined by the class. Languages like c++ and Eiffel use classes to specify both an object's type and its implementation. Smalltalk programs do not declare the types of variables; consequently,the compiler does not check that the types of objects assigned to a variable are subtypes of the variable's type. Sending a message requires checking that the class of the receiver implements the message, but it doesn't require checking that the receiver is an instance of a particular class. It's also important to understand the difference between class inheritance and interface inheritance (or subtyping). Class inheritance defines an object's implementation in terms of another object's implementation. In short, it's a mechanism for code and representation sharing. In contrast,interface inheritance(or subtyping) describes when an object can be used in place of another. I am familiar with the Java and JavaScript programming language and not really familiar with either C++ or Smalltalk or Eiffel as mentioned here. So I am trying to map the concepts discussed here to Java's way of doing classes, inheritance and interfaces. This is how I think of of these concepts in Java: In Java a class is always a blueprint for the objects it produces and what interface(as in "set of all possible requests that the object can respond to") an object of that class possess is defined during compilation stage only because the class of the object would have implemented those interfaces. The requests that an object of that class can respond to is the set of all the methods that are in the class(including those implemented for the interfaces that this class implements). My specific questions are: Am I right in saying that Java's way is more similar to C++ as described in the third paragraph. I do not understand what is meant by interface inheritance in the last paragraph. In Java interface inheritance is one interface extending from another interface. But I think the word interface has some other overloaded meaning here. Can some one provide an example in Java of what is meant by interface inheritance here so that I understand it better?

  Read the article

• Log oddities: 404s for client-garbled image URLs

  - by Chris Adams

  I've noticed some odd 404s which appear to be broken URL rewriting code: Our deep zoom view generates images URLs like this: /media/204/service/dzi/1/1_files/7/0_0.jpg I see some - well under <1% - requests for slightly altered URLs: /media/204/s/rvice/d/i/1/1_files/7/0_0.jpg These requests come from IP addresses all over the world (US, Canada, China, Russia, India, Israel, etc.), desktop and mobile users with multiple user-agents (Chrome, IE, Firefox, Mobile Safari, etc.), and there is plenty of normal activity in the same session so I'm assuming this is either widespread malware or some broken proxy service. I have not seen them from anything other than images, which suggests that this may be some sort of content filter. Has anyone else seen this? My CDN logs show the first request on June 8th ramping up from several dozen to several hundred per day.

  Read the article

• CAPTCHA blocking for my scraping script?

  - by Surabhil Sergy

  I am working on a scraping project which involves getting web data and parsing them for further use. I have been working using PHP and CURL to make scraping scripts which crawls web data and I make use of either PHP Dom or Simple HTML DOM Parser library for these kinds of projects. On a recent project I encountered some challenges; initially I found the target website blocked my server IP such that the server could not make any successful requests to the site. Understanding these issues as common I bought a set of private proxies and tried to make request calls using them. Though this could get successful response, I noticed the script is getting some kind of blocks after 2-3 continuous requests. On printing and checking the response I could see a pop-up asking for CAPTCHA validation. I could not see any captcha characters to be entered and it also shows an error “input error: invalid referrer”. On examining the source I could see some Google recaptcha scripts within. I’m stuck at this point and I m not able to execute my script. My script is used for gathering data and it needs to go through a large number of pages periodically over the site. But in the current scenario I am not able to proceed with my script. I could see there are some options to overcome these captcha issues and scraping these kinds of sites too are common. I have been checking my script performance and responses over last two months. I could see during first month I was able to execute very large number of requests from a single IP and I was able to get results. Later I get an IP block and used private proxies which could get me some results. Later I am facing now with the captcha trouble. I would appreciate any help or suggestions in this regard. (Often in this kind of questions I used to get a first comment as, ‘Have you asked for prior permission from the target?’ .I haven’t ,but I know there are many sites doing so to get the details out of sites and target sites may not often give access to them. I respect the legality and scraping etiquettes but I would like to know at what point I stuck and how could I overcome that! ) I could provide any supporting information if needed.

  Read the article

• Do you start migrating your Swing project to JavaFX

  - by Yan Cheng CHEOK

  I have a 4 years old project which is written in Swing + SwingX. Currently, it is still alive and still kicking. However, as more GUI related feature requests coming in (For instance, a sortable tree table), I start to feel the difficulty in fulling the requests. This is true especially there isn't active development going around SwingX project. Also, I hardly can find any good, yet being actively maintained/ developed/ evolving GUI Java framework. I was wondering, any of Swing developers feel the same thing? Have you start to migrate your Swing project to a much more active developed GUI framework like JavaFX?

  Read the article

• Unauthorized response from Server with API upload

  - by Ethan Shafer

  I'm writing a library in C# to help me develop a Windows application. The library uses the Ubuntu One API. I am able to authenticate and can even make requests to get the Quota (access to Account Admin API) and Volumes (so I know I have access to the Files API at least) Here's what I have as my Upload code: public static void UploadFile(string filename, string filepath) { FileStream file = File.OpenRead(filepath); byte[] bytes = new byte[file.Length]; file.Read(bytes, 0, (int)file.Length); RestClient client = UbuntuOneClients.FilesClient(); RestRequest request = UbuntuOneRequests.BaseRequest(Method.PUT); request.Resource = "/content/~/Ubuntu One/" + filename; request.AddHeader("Content-Length", bytes.Length.ToString()); request.AddParameter("body", bytes, ParameterType.RequestBody); client.ExecuteAsync(request, webResponse => UploadComplete(webResponse)); } Every time I send the request I get an "Unauthorized" response from the server. For now the "/content/~/Ubuntu One/" is hardcoded, but I checked and it is the location of my root volume. Is there anything that I'm missing? UbuntuOneClients.FilesClient() starts the url with "https://files.one.ubuntu.com" UbuntuOneRequests.BaseRequest(Method.{}) is the same requests that I use to send my Quota and Volumes requests, basically just provides all of the parameters needed to authenticate. EDIT:: Here's the BaseRequest() method: public static RestRequest BaseRequest(Method method) { RestRequest request = new RestRequest(method); request.OnBeforeDeserialization = resp => { resp.ContentType = "application/json"; }; request.AddParameter("realm", ""); request.AddParameter("oauth_version", "1.0"); request.AddParameter("oauth_nonce", Guid.NewGuid().ToString()); request.AddParameter("oauth_timestamp", DateTime.Now.ToString()); request.AddParameter("oauth_consumer_key", UbuntuOneRefreshInfo.UbuntuOneInfo.ConsumerKey); request.AddParameter("oauth_token", UbuntuOneRefreshInfo.UbuntuOneInfo.Token); request.AddParameter("oauth_signature_method", "PLAINTEXT"); request.AddParameter("oauth_signature", UbuntuOneRefreshInfo.UbuntuOneInfo.Signature); //request.AddParameter("method", method.ToString()); return request; } and the FilesClient() method: public static RestClient FilesClient() { return (new RestClient("https://files.one.ubuntu.com")); }

  Read the article

• Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

  - by Giri Mandalika

  An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

  Read the article

• GNU screen cannot find terminfo entry on HP-UX

  - by Ency

  I am trying to make screen work on HP-UX B.11.23 U ia64 0308561483 unlimited-user license. Please notice I do not have root access. I have already compiled screen successfully, configured with LIBS=-lcurses. When I try to start screen it wrotes Cannot find terminfo entry for 'xterm'. But there ARE terminfos for the terminal type in screen-4.0.3> ls -a /usr/share/lib/terminfo/x/ . .. x-hpterm x1700 x1720 x1750 xitex xl83 xterm xterms I thing the problem may be there are in non-standard path, because according to man page standard path is /usr/lib/terminfo/?/* What I tried: But as I said I do not have root access so cant make symlink, anyway I tried run screen with filled TERMINFO_DIRS (TERMINFO_DIRS=/usr/share/lib/terminfo/x/ ./screen and TERMINFO_DIRS=/usr/share/lib/terminfo/ ./screen) but none of them work - same error. Change TERM to different values - same error Cannot find terminfo entry for <WHATEVER WHAT WAS IN TERM VAR>. Put something into screenrc and run ./screen -c screenrc screen-4.0.3> cat screenrc attrcolor b ".I" term xterm termcap xterm* LP:hs@ termcapinfo xterm 'Co#256:AB=\E[48;5;%dm:AF=\E[38;5;%dm' defbce "on" But no luck so far, have you got any suggestions? Need some additional information, let me know.

  Read the article

• Securing Mobile Apps in a Bring Your Own Device World

  - by Naresh Persaud

  As more and more business users begin using their personal devices to access corporate information and resources, the number of network access requests has risen dramatically.  Access Management products and strategies that were based on an employee accessing network resources from a single desktop PC were never designed to monitor and manage an employee that is using a desktop and a laptop, a tablet, and a smartphone all from outside the corporate network, and possibly from an unsecured wireless public network. A new approach is needed to manage the types and frequency of mobile app access requests - an integrated Platform Approach to Identity and Access Management that is location and device aware, that can warn you of unusual or high risk access.  A platform that provides standard APIs so you can manage your mobile apps the same way that you manage your enterprise apps. View the slideshow below to see how the Oracle Identity Management platform can help you secure your mobile applications and data in a Bring Your Own Device World. Securing access inabyod-world-final-ext View more PowerPoint from OracleIDM

  Read the article

• "Invalid operation" status code in a HATEOAS REST API

  - by FinnNk

  In a HATEOAS API links are returned which represent possible state transitions. A conforming client should just be retrieving and following those links, but if a non-conforming client is constructing URIs rather than following the supplied links what would be the most appropriate status code/response to return? 400 would work, together with some information in the response body - this is what we're currently doing 403 I guess would be wrong, as it implies that the request could never work - but potentially the link may be available in the future 404 sounds plausible - at this point in time the resource doesn't exist What do people think? I know that conditional requests can handle requests based on stale responses (resulting in e.g. 412s), but this is a slightly different situation.

  Read the article

• Is it possible for an application (written in Mono C#) to run a console command?

  - by Razick

  I am wondering if a Mono C# application can somehow run a terminal command. For example, could the user give the program his or her password and then have the application run sudo apt-get install application-name (console requests password) password (console requests confirmation) y Preferably, this would be done without actually opening a terminal visible to the user, so that the application could provide the necessary feedback and manage the whole operation cleanly with as little user interaction as possible. Is there a way to do that? Let me know if clarification is needed. Thank you!

  Read the article

• Can I make Google Analytics set its cookies on just a subdomain? (I.e. www.domain.com, not domain.com)

  - by Paul D. Waite

  I’m using Google Analytics on a site — let’s call it www.domain.com. My Google Analytics website profile is for www.domain.com, and my only report is set up for www.domain.com. Requests to domain.com redirect permanently to www.domain.com. I’ve got the regular Analytics JavaScript on my index page for the domain. For some reason, it seems to be setting its cookies for domain.com instead of www.domain.com. This is unfortunate, as I’ve got cdn.domain.com set up as a CDN using Amazon Cloudfront, so I’d rather not have useless cookies (Analytics seems to set four cookies) cluttering up those requests. How can I make Analytics set cookies for www.domain.com instead of domain.com?

  Read the article

• xen + debian network after upgrade squeeze to wheeze

  - by rush

  I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

  Read the article

• URL rewriting via forward proxy

  - by Biggroover

  I have an app that runs inside my firewall and talks out to multiple end points via HTTP/HTTPS on a non-standard port e.g. http://endpoint1.domain.com:7171, http://endpoint2.domain.com:7171 What I want to do is route these requests through a forward proxy that then rewrites the URL to something like http://allendpoints.domain.com/endpoint1 (port 80 or 443) then on the other end have a reverse proxy that unwinds what I did on the forward proxy to reach the specific endpoints. The result being that I can route existing app requests through to specific endpoints across the internet without having to change my app software. My questions are: is this even possible? is it a good idea, are their better ways to do this? Can this be done with IIS and Apache as the proxies?

  Read the article

• URL parameter names being changed by user agents

  - by Mike Deck

  In reviewing one of our site's web logs I'm seeing instances where we are returning a 404 to requests because we're expecting an id parameter to be sent, but instead we're seeing a di parameter. The resource in question is an image but which image file actually gets served is dependent on the id parameter. The expected url is something like http://images.mysite.com/photo.gif?id=123&width=200&height=300 What I'm seeing in the logs is requests for http://images.mysite.com/photo.gif?di=123&width=200&height=300 The only case where we are seeing this on the id parameter. It seems unlikely that this is due to a server side or JavaScript bug since it seems to be only effecting a small percentage of our traffic. We are seeing this across a wide variety of user agents (both mobile and desktop) and IPs. Has anyone else seen this? Is there a browser plugin or other software you're aware of that could be causing this, and if so is there a good way to work around the issue?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >