Search Results

Search found 2495 results on 100 pages for 'tom rom'.

Page 92/100 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Re-installing Windows on an old laptop

  - by Khaled

  I have an old laptop and I want to re-install Windows XP on it. The problem is that this laptop does not have an optical drive. I checked the boot sequence in the BIOS. It does not show an option to boot from USB. It have only two options: Boot from HD. Boot using Realtek agent (network boot). I tried to copy the Windows CD to second drive D:\ and run the installed from there. However, I could not format the C:\ drive. Windows complaints about setup files will be removed or something like that. I tried to boot the laptop using PXE, but I could not. It seems that the DHCP request did not get answered. I thought I could use a USB CD-ROM drive (I don't have one to try), but it might not work as there is no option to boot from USB. Do you think it will work? Do I have other options to try? Any recommendations?

  Read the article

• Windows 7 DVD doesn't boot up, neither does USB. :'(

  - by Manan Shah

  My problem is that i'm not able to install windows 7. Been trying to install this since past 1 week. The methods i've tried are: I have a windows 7 bootable DVD which doesnt boot up. (I've set BIOS to boot from DVD ROM first but it just won't boot from the DVD). Tried to install Windows 7 from the same DVD to a friend's PC and it worked. So the DVD has no issues. I tried to run 'Setup.exe' from within the DVD. The two options pop-up 'Check compatibility' and 'Install now'. On clicking install now, after sometime, an error is encountered with the message 'Windows was unable to create a required installation folder' error code:0x8007000D. I am running Windows XP Professional and there's only one user on the PC which is the Admin, so i do not know why is the setup not getting permissions. I've also uninstalled my antivirus, CD burning software, disabled firewall and disconnected all other devices, but its still the same. I tried to install it from a USB device by making it bootable but that too doesnt work. (Yes the mobo supports booting from the USB). The problem is that XP does not recognize a 'USB' device on boot. Rather it shows this USB stick as a removable 'Hard Drive'. Furthermore, i changed the order of Hard Drive boot to boot from this removable Hard Drive first, it still boots my existing OS. Is there anything else that can be done? Any help would be greatly appreciated. :) Please ask if any other information is required, this post is becomimg increasingly long to add any other details. PS: I want to dual boot windows 7 with my existing XP, but that would be after i manage to run the windows 7 setup in the first place. PPS: Please bare with any 'not-so-technical' terms, i am a beginner with this. Again, thank you for taking the time and trying to help, really appreciate it. :)

  Read the article

• Hard Drive Compatibility with Motherboard

  - by Wesley

  Here are the current specs to put things in context: ECS P4VXASD2+ V5.0 Intel Pentium 4 Northwood 2.8 GHz 2x 512MB PC2100 DDR266 SDRAM Maxtor DiamondMax 10 250 GB PATA (IDE) HDD Gigabyte 52x CD-ROM NVIDIA TNT2 Pro 16 MB OKIA 300W ATX PSU USB bracket Modem PCI Before, I actually had a 300 GB hard drive installed. However, I read the FAQ for the motherboard and discovered that a maximum of 250 GB hard drive was supported. So I ended up finding the one listed above and put that in. However, upon booting up, I reset the BIOS to defaults and auto-detected all the drives installed. The 250 GB came up as something like 251.0 GB. I didn't think much about it until I tried to boot up a Windows XP installation disc. It booted up successfully and run for about a minute before the computer randomly rebooted. I've made sure that all the jumpers and settings are correct and everything has been installed correctly. I've tried running it without the addons and one stick of RAM but still the same thing. What else could be causing this problem?

  Read the article

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got fglrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci EDIT: fglrx 12.4 seems to work. Thing is, since I am on kernel 3.2, I need to apply this patch to common/lib/modules/fglrx/build_mod/firegl_public.c. I thought ATI dropped support for the 4xxx series after 12.4. Why doesn't 12.6 legacy work?

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• Ubuntu 10.04 network manager issues

  - by Shark

  I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

  Read the article

• I need a driver for my Cardbus USB 2.0 card

  - by Carl

  The picture and details of the card are here: http://www.ht-link.com/en/ProductView.asp?ID=106 The Windows drivers for this don't work right. I tried them on my previous laptop, and then installed the ones off their included CD. (Note that the systems requirements includes a CD-ROM drive...) I have a new laptop, and lost the CD. The website that lists the drivers is broken - the download links don't work. It is here: http://www.ht-link.com/en/DownView.asp?ID=10 I need the very first link - The Win XP drivers for the HT-112NEC. The company does not reply to my e-mails. I've tried searching Google for other sources for the driver (I didn't bother with those sites that want me to install driver detection software or create a log-in for their site). [Here's the problem I am getting using the drivers Windows XP SP3 installs: When I plug in my USB 2.0 hard-disk adapter, a USB Mass Storage Device entry is added in the Device Manager, but there is no entry under Disk Drives, and a drive letter is not assigned, so I can't access the driver. Like I said, this card didn't work without their special drivers on my other laptop, either.]

  Read the article

• How to install Windows with no CD drive boot option in BIOS?

  - by Kris Hollenbeck

  I have a new computer which I built from scratch and I am trying to install a copy of Windows Vista on it. I am able to get to the BIOS and change the boot options which are as follows.. -Built-in EFI Shell -SATA: ST31000528AS I have searched around for and everything I find says to boot from the CD rom. However, as you can see. That is not an option for me. So I am wondering if there is another way around this? Is it possible to boot the Disk from the EFI Shell? Any help is much appreciated. Thanks EDIT: I have tried this.. http://technet.microsoft.com/en-us/library/dd744321%28v=ws.10%29.aspx UPDATE: I managed to make my USB bootable via the BIOS and I have copied my windows Vista disk onto my USB via drag and drop. However I am still not able to get the windows install to start. Also I have tried booting it from the EFI shell using the following command.. blk6: blk6:\> \EFI\BOOT\BOOTX64.EFI Still no luck..

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• HD working with IDE USB adapter but not recognised by bios

  - by Rajeeva

  I have a Windows XP Pentium III desktop with two hard drives. The first one has the OS and is luckily working. The second drive on the secondary master IDE channel few days back was unable to read some files and since then for some time it was failing and reviving intermittently and now it is always showing as failed on the IDE channel When the HD was intermittenly failing, I was able to copy some data from it to the other drive - also during that time if the system was running and the hard disk failed at that time, the system froze and then i had to reboot. then I got a new 80 gb hdd similar (same make - seagate barracuda) to the earlier failing one, a new data cable for the drive and an IDE to USB adapter. the new hard drive i installed in the previous drive's place (secondary master), formatted it and it worked for 1 day and then it also failed - simultaneously i connected the old hd to the IDE/USB adapter and i could view all the data - some of that data i was able to back up from the old hd to the new hd before the new hd failed the new hd i have tried connecting on the primary channel as the slave disk but when i do that then the bios does not detect either the OS drive or the new drive and the system does not boot surprisingly, the older (previously failed) hd and the new hd are both working fine on the usb channel with the IDE/USB adapter. i have ruled out any problem with the secondary channel since the dvd rom i was earlier using as primary slave have now connected to secondary master and it works fine. i am really confused by this behavior on my system. please can anybody try to solve this for me. thanks.

  Read the article

• Access to CD/DVD Drive is Denied through Windows 7 Explorer (Permission Problem)

  - by Synetech inc.

  A while ago I started having trouble with my optical drives. Both of them keep showing up in Explorer as CD/DVD drives on boot, but as soon as I put a disc in either one, it suddenly turns into a hard-drive—“local disk” is displayed in the Type column, though the File System column remains UDF/CDFS. (I though that maybe it was a permission issue on the registry key in HKLM\System\CurrentControlSet..., but I’m not so certain because of the next test.) When I try to open a disc (of any type), I get an access denied error message. If I open an elevated command-prompt, I am able to access the files. Also, if I kill Explorer and run it from an elevated command-prompt (thus giving Explorer elevated permissions), then I can access the files from Explorer. I’ve tried uninstalling and reinstalling the devices without success. The security dialog indicates that there are none set for the drives (no owner and no permissions). I tried setting the owner, but am only able to do so if there is a disc in it (it complains if it is empty), but the settings do not stick (if I immediately open the security dialog after setting it, it is empty again). I tried setting permissions, but that gives an error. I’ve included a screencap-flowchart of the security dialog of one of the drives below. (Yes, I made sure that there are no upper- or lower-filters, and yes, I ran sfc. I also made sure that in the policy editor, “devices: restrict CD-ROM...” is not set.) Does anyone know what the owner and permissions are supposed to be for optical drives and how to reset them?

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Embedded Windows XP

  - by Kyle

  My company acquired a brake press for bending large structural steel plates. We received it second hand and it came with an embedded copy of windows XP. Now for the part that's driving me nuts: plug and play has been turned off, also accessibility options has been disabled. What does this mean for me? Keyboards will not work! Nothing that plugs into a USB port will work and it does not have a CD ROM drive. I have tried to turn on plug and play using the on screen keyboard but it is not there since accessibility options is turned off. I would just get an updated copy of the the embedded OS but they come from Sweden and are extremely expensive. I assume there has got to be a way to get a USB devices to work. We need to get a wifi adapter on it so I can use team viewer and remotely configure it for our needs. Things to keep in mind: There is no keyboard so everything has to be done with the mouse There is no PS2 port for a keyboard just a mouse. Odd. I am 5 states away from this location and have been working with a tech who is physically installing the machine. System 32 seems to be missing A LOT of files, the tech told me there is only 8 folders in there and no other files (I don't even understand how Windows is running like this). If anyone has ANY ideas I would appreciate it, I am unsure where to go from here.

  Read the article

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

  Read the article

• Getting windows virtio mounted/installed for KVM

  - by Swifty

  There might be an easy answer to this. I have exhausted my search on google for a solution. Here's my problem. I need to get Windows working on a KVM vps with virtualizor CP. As I get into windows installation in VNC, there's the mandatory driver installation requirement, as HDD is in virtio. There seems to be 2 solutions: 1. Mount the virtio iso (http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bin/) in the CD drive by unmounting Windows ISO and proceed with driver installation. 2. Create a secondary CD drive and mount the virtio iso there. Well, 1st step never seems to work. If I unload the Windows iso and load the virtio iso, it never reflects back in the VNC. Second step I have yet to be successfull. I try to create a second IDE CD ROM drive via virt-manager but the virtio (virtio-win-0.1-30.iso) iso is never listed in there, whereas i specially placed it in /var/lib/libvirt/images folder. Any suggestions on where I screwed up?

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• Get more space for redis in unix server

  - by DevTraveler

  In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

  Read the article

• ExtJS: Combobox in EditorGridPanel not selecting the desired item (with test case)

  - by TomH

  I'm using ExtJS to create an EditorGridPanel with a combobox for an editor in a cell. The combobox in my EditorGridPanel that is not working as I'd expect it to. When the user types the first letter of an item in the drop down list, the combobox seems to ignore it and select the first item in the list. I can reproduce the error consistently and have put together a test case here: http://cluebucket.com/dev/testcase/testcase.html Load the page and reproduce the behavior by the following -- note that this is all done using the keyboard, no mouse clicks: Click 'Add Record' (A new row is added to the grid) enter text in the text field. TAB to the Priority field without selecting anything (None will remain selected) TAB out of the Priority field. (A new row is added to the grid) enter text and TAB to the Priority field TYPE v (Very High is selected) TAB out of the priority field (A new row is added to the grid) enter text and TAB to the Priority field Type v (None is selected, but Very High should have been) TAB out of the priority field Enter text and TAB to the priority field Type l ('el') (Low is selected) TAB out, enter text, TAB to priority Type l (None is selected) It appears that whenever the user attempts to select the same value that was selected in the previous row, the combobox selects None. Any ideas? The code is available at cluebucket.com/dev/testcase/js/testcase.js Thoughts/Pointers/Corrections are appreciated!! thanks tom

  Read the article

• Modify python USB device driver to only use vendor_id and product_id, excluding BCD

  - by Tony

  I'm trying to modify the Android device driver for calibre (an e-book management program) so that it identifies devices by only vendor id and product id, and excludes BCD. The driver is a fairly simply python plugin, and is currently set up to use all three numbers, but apparently, when Android devices use custom Android builds (ie CyanogenMod for the Nexus One), it changes the BCD so calibre stops recognizing it. The current code looks like this, with a simple list of vendor id's, that then have allowed product id's and BCD's with them: VENDOR_ID = { 0x0bb4 : { 0x0c02 : [0x100], 0x0c01 : [0x100]}, 0x22b8 : { 0x41d9 : [0x216]}, 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, 0x04e8 : { 0x681d : [0x0222]}, } The line I'm specifically trying to change is: 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, Which is, the line for identifying a Nexus One. My N1, running CyanogenMod 5.0.5, has the BCD 0x0226, and rather than just adding it to the list, I'd prefer to eliminate the BCD from the recognition process, so that any device with vendor id 0x18d1 and product id 0x4e11 or 0x4e12 would be recognized. The custom Android rom doesn't change enough for the specifics to matter. The syntax seems to require the BCD in brackets. How can I edit this so that it matches anything in that field?

  Read the article

• Finding and Printing all Links within a DIV

  - by Abs

  Hello all, I am trying to find all links in a div and then printing those links. I am using the Simple HTML Dom to parse the HTML file. Here is what I have so far, please read the inline comments and let me know where I am going wrong. include('simple_html_dom.php'); $html = file_get_html('tester.html'); $articles = array(); //find the div the div with the id abcde foreach($html->find('#abcde') as $article) { //find all a tags that have a href in the div abcde foreach($article->find('a[href]') as $link){ //if the href contains singer then echo this link if(strstr($link, 'singer')){ echo $link; } } } What currently happens is that the above takes a long time to load (never got it to finish). I printed what it was doing in each loop since it was too long to wait and I find that its going through things I don't need it to! This suggests my code is wrong. The HTML is basically something like this: <div id="abcde"> <!-- lots of html elements --> <!-- lots of a tags --> <a href="singer/tom" /> <img src="image..jpg" /> </a> </div> Thanks all for any help

  Read the article

• Boost Solr results based on the field that contained the hit

  - by TomFor

  Hi, I was browsing the web looking for a indexing and search framework and stumbled upon Solr. A functionality that we abolutely need is to boost results based on what field contained the hit. A small example: Consider a record like this: <movie> <title>The Dark Knight</title> <alternative_title>Batman Begins 2</alternative_title> <year>2008</year> <director>Christopher Nolan</director> <plot>Batman, Gordon and Harvey Dent are forced to deal with the chaos unleashed by an anarchist mastermind known only as the Joker, as it drives each of them to their limits.</plot> </movie> I want to combine for example the title, alternative_title and plot fields into one search field, which isn't too difficult after looking at the Solr/Lucene documentation and tutorials. However I also want that movies that have a hit in title have a higher score than hits on alternative_title and those in their turn should score higher than hits in the plot field. Is there any way to indicate this kond of scoring in the xml or do we need to develop some custom scoring algorythm? Please also note that the example I've givnen is fictional end the real data will probably contain 100+ fields. Thanks in advance, Tom

  Read the article

• Java NoClassDefFoundError when calling own class from instrumented method

  - by lethal_possum

  Hello, I am working on a kit of simple Java agents to help me (and hopefully others) troubleshoot Java applications. One of the agents I would like to create instruments the JComponent.getToolTipText() method to quickly identify any GUI class by just hovering the mouse cursor over it. You can find the code of my transformer and the rest of the project here: http://sfn.cvs.sourceforge.net/viewvc/sfn/core/src/main/java/org/leplus/sfn/transformer/JComponentTransformer.java?view=markup I launch my test GUI with the agent attached as follow: $ java -javaagent:target/jars/sfn-0.1-agent.jar=JComponent -cp lib/jars/bcel-5.2.jar:target/jars/sfn-0.1-test.jar:target/jars/sfn-0.1-agent.jar org.leplus.sfn.test.Main sfn-0.1-agent.jar contains the org.leplus.sfn.transformer.JComponentTransformer class. sfn-0.1-test.jar contains the org.leplus.sfn.test.Main class. Here is what the application prints when I launch it and I put the mouse over it: Loading agent: JComponent Instrumentation ready! Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/leplus/sfn/tracer/ComponentTracer at javax.swing.JComponent.getToolTipText(JComponent.java) at javax.swing.ToolTipManager$insideTimerAction.actionPerformed(ToolTipManager.java:662) ... What is surprising to me is that if I change my transformer to call any class from the JRE, it works. But it doesn't work when I call my own class org.leplus.sfn.tracer.ComponentTracer. My first guess was a classpath issue but the ComponentTracer is both in the classpath and in the agent's jar. So I am lost. If any of you see where I am missing something. Cheers, Tom

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >