Search Results

Search found 24106 results on 965 pages for 'usb key'.

Page 92/965 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Displaylink USB show "Logo / Loading" on monitor

  - by Ken Le

  I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

  Read the article

• retrieve value from hashtable with clone of key; C#

  - by Johnny

  I would like to know if there is any possible way to retrieve an item from a hashtable using a key that is identical to the actual key, but a different object. I understand why it is probably not possible, but I would like to see if there is any tricky way to do it. My problem arises from the fact that, being as stupid as I am, I created hashtables with int[] as the keys, with the integer arrays containing indices representing spatial position. I somehow knew that I needed to create a new int[] every time I wanted to add a new entry, but neglected to think that when I generated spatial coordinate arrays later they would be worthless in retrieving the values from my hashtables. Now I am trying to decide whether to rearrange things so that I can store my values in ArrayLists, or whether to search through the list of keys in the Hashtable for the one I need every time I want to get a value, neither of the options being very cool. Unless of course there is a way to get //1 to work like //2! Thanks in advance. static void Main(string[] args) { Hashtable dog = new Hashtable(); //1 int[] man = new int[] { 5 }; dog.Add(man, "hello"); int[] cat = new int[] { 5 }; Console.WriteLine(dog.ContainsKey(cat)); //false //2 int boy = 5; dog.Add(boy, "wtf"); int kitten = 5; Console.WriteLine(dog.ContainsKey(kitten)); //true; }

  Read the article

• How to figure out which key was pressed on a BlackBerry

  - by Skrud

  What I want: To know when the user has pressed the button that has the number '2' on it, for example. I don't care whether "Alt" or "Shift" has been pressed. The user has pressed a button, and I want to evaluate whether this button has '2' printed on it. Naturally, if I switch devices this key will change. On a Bold 9700/9500 this is the 'E' key. On a Pearl, this is the 'T'/'Y' key. I've managed to get this working in what appears to be a roundabout way, by looking up the keycode of the '2' character with the ALT button enabled and using Keypad.key() to get the actual button: // figure out which key the '2' is on: final int BUTTON_2_KEY = Keypad.key(KeypadUtil.getKeyCode('2', KeypadListener.STATUS_ALT, KeypadUtil.MODE_EN_LOCALE)); protected boolean keyDown(int keycode, int time) { int key = Keypad.key(keycode); if ( key == BUTTON_2_KEY ) { // do something return true; } return super.keyDown(keycode,time); } I can't help but wonder if there is a better way to do this. I've looked at the constants defined in KeypadListener and Keypad but I can't find any constants mapped to the actual buttons on the device. Would any more experienced BlackBerry devs care to lend a helping hand? Thanks!

  Read the article

• How do you assign commands to keys in Terminal?

  - by NES

  Is there a solution to assign special key combinations to words in terminal use. For example the less command is very usefull and i use i a lot to pipe the output of another process through it. The idea would be to set up special key combinations that are only active in terminal use assigned to write different commands? So pressing CTRL + l in terminal window could write | less or CTRL + G could stand for | grep Note: i just mean adding the letters to commandline not execute the finally. A similar way what's tabcompletion but more specific.

  Read the article

• android: consume key press, bypassing framework processing

  - by user360024

  What I want android to do: when user presses a single key, have the view respond, but do so without opening a text area and displaying the character associated with the key that was pressed, and without requiring that the Enter key be pressed, and without requiring that the user press Esc to make the text area go away. For example, when user presses "u" (and doesn't press Enter), that means "undo the last action", so the controller and model immediately undo the last action, then the view does an invalidate() and user sees that their last action has been undone. In other words the "u" key press should be silently processed, such that the only visual result is that user's last action has been undone. I've implemented OnKeyListener and provided an onKey() method: the class: public class MyGameView extends View implements OnKeyListener{ in the constructor: //2010jun06, phj: With onKey(), helps let this View consume key presses // before the framework gets a chance to consume the key press. setOnKeyListener((View.OnKeyListener)this); the onKey() method: public boolean onKey(View v, int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_R) { Log.d("BWA", "In onKey received keycode associated with R."); } return true; // meaning the event (key press) has been consumed, so // the framework should not handle this event. } but when user presses "u" key on the emulator keypad, a textarea is opened at the bottom of the screen, the "u" charater is displayed there, and the onKey() method doesn't execute until user presses the Enter key. Is there a way to make android do what I want? Thanks,

  Read the article

• OpenSSH does not accept public key?

  - by Bob

  I've been trying to solve this for a while, but I'm admittedly quite stumped. I just started up a new server and was setting up OpenSSH to use key-based SSH logins, but I've run into quite a dilemma. All the guides are relatively similar, and I was following them closely (despite having done this once before). I triple checked my work to see if I would notice some obvious screw up - but nothing is apparent. As far as I can tell, I haven't done anything wrong (and I've checked very closely). If it's any help, on my end I'm using Cygwin and the server is running Ubuntu 12.04.1 LTS. Anyways, here is the output (I've removed/censored some parts for privacy (primarily anything with my name, website, or its IP address), but I can assure you that nothing is wrong there): $ ssh user@host -v OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Connecting to host [ipaddress] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 24:68:c3:d8:13:f8:61:94:f2:95:34:d1:e2:6d:e7:d7 debug1: Host 'host' is known and matches the ECDSA host key. debug1: Found key in /home/user/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Trying private key: /home/user/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). What can I do to resolve my problem?

  Read the article

• External USB HD issues with a twist (works on Windows7 but not XP)

  - by Eruditass

  I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

  Read the article

• Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

  - by Liam

  I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

  - by Chris Boyle

  I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

  Read the article

• How can I disable the automatic switch to "library" mode in Windows 7's Media Player 12?

  - by matthews

  Whenever I plug any USB device into my computer while running Windows Media Player 12 in Windows 7, it will automatically swtich the player from the Now Playing mode to Library mode. This is intended to faciliate syncing between Media Player and MP3 players, but it happens for any USB device. I'd like this to not happen since it's infuriating to see this take place while I'm watching something on a separate screen in Media Player just from plugging in a USB key. This has nothing to do with Windows autorun, and nothing to do with versions of Windows pre-7. And no, switching to some other video player is not an option; I've tried them all, none are as good as stock Media Player in 7.

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Cheapest Embedded System with Wireless Connectivity?

  - by geeko

  Problem: I'm trying to capture some information coming from keyboard, mouse and barcode reader connected to some PC via PS/2, USB and/or RS-232, before information get to PC and send it over the Internet to some central server. I'm thinking to do so by using some kind of hardware interface (middleware, if you like) between PC and input devices. I thought this interface can be embedded PC, PDA or simply some mobile phone with wireless connectivity. PS/2 and RS-232 could be converted to USB using some USB convector/hub that connects to one of these interface systems. Then some special API programming take place to communicate between PC, input devices and wireless server, in the form of application running on the interface system. What's the cheapest solution that can achieve this? Or possibly any other solution?

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Ubuntu (11.10) fails to connect to wireless network

  - by Tal Galili

  I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

  Read the article

• DVD RW: Are they still relevant for backups?

  - by Harry

  Hello, With the availability of compact USB memory sticks with much, MUCH higher storage capacities is there still any use-case for taking periodic, incremental backups on DVD/RWs? The DVD/RW has an additional annoyance that you cannot drag and drop files to it as easily as you can on a USB memory stick. So, if I have a 4.7GB DVD/RW, I must re-burn the whole image every time I backup new stuff... with possibly rearranged file/folder structure. Secondly, why in this day and age you cannot install a file-system (like ext3 or FAT32) on a DVD/RW... and likewise on CD/RW's as you can on a USB memory stick? Many thanks, /HS

  Read the article

• DVD RW: Are they still relevant for backups?

  - by Harry

  Hello, With the availability of compact USB memory sticks with much, MUCH higher storage capacities is there still any use-case for taking periodic, incremental backups on DVD/RWs? The DVD/RW has an additional annoyance that you cannot drag and drop files to it as easily as you can on a USB memory stick. So, if I have a 4.7GB DVD/RW, I must re-burn the whole image every time I backup new stuff... with possibly rearranged file/folder structure. Secondly, why in this day and age you cannot install a file-system (like ext3 or FAT32) on a DVD/RW... and likewise on CD/RW's as you can on a USB memory stick? Many thanks, /HS

  Read the article

• Bootmgr is missing for windows xp

  - by user1167074

  I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

  Read the article

• Installing any linux distro on new netbook hangs midway

  - by Neigyl R. Noval

  I have just bought a new netbook, Lenovo S110 with a starter Window 7, 32 bit Operating system. I wanted to wipe away Windows and go with Debian or Ubuntu. I have successfully made my USB drive bootable with the Debian net install. The problem is, my computer always hangs up at the start of the installation (with the latter shown on screen). Keyboard stopped responding , and USB was probably not reading (since it was not blinking anymore). I know the bootable USB drive with Debian installer is working since installation works on other netbooks. What should I do to install Linux on my netbook?

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• How to install windows on a server with no CD or DVD drive

  - by user29266

  I've found a few posts on this site, however my situation is different. I have a new Dell server with no OS installed. I would like to install Windows 2008 Web Edition. I have a few USB ports and Ethernet. No CD or DVD drives. Is this article the best & only way to proceed? Installing Windows 2008 via USB thumbdrive or should I just get a external hardrive and hook it up to a usb. Once the OS is installed I'll never need a DVD drive again - so that's idea is a waste of money.

  Read the article

• External disk not working with Mac OS X 10.5

  - by ctx2002

  Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

  Read the article

• \windows\system32\config\system is corrupt or missing

  - by user16877

  Hi I had a server pc with the following error. \windows\system32\config\system is corrupt or missing As to fix it i replaced the files instructed here http://support.microsoft.com/kb/307545. Problem solved and I was able to boot up to windows desktop. But now none of the usb ports recognize any of the usb devices such as mouse, keyboard, thumbdrive nada... The usb mouse powers up (the light at the bottom lids up) but no functionality. Has anyone experienced this kind of behaviour any tip is really appreceiated. PS:There is no PS2 ports for both mouse and keyboard. Edit: Same behaviour persists in Safe mode also.

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• Ubuntu 12.04 LTS Wireless Asus USB-N53 (rt3572sta) driver installation issue

  - by Jake Thompson

  My purchase of the Asus USB-N53 just came in today and I spent several hours Googling and researching drivers for this device. When I first plugged the device in it connected fine to my open system, WEP, DHCP configured access point. I opened Google Chrome and a few pages loaded, everything seemed fine. 30 seconds later... Boom! It disconnected and showed attempts to reconnect and asked for the WEP key and just showed a state of infinite connection time until it asked me for the password again. I'm using amd64 (64 bit Ubuntu desktop 12.04 LTS) The official driver can be found here although I had no luck with it. lsusb: Bus 003 Device 002: ID 0b05:179d ASUSTek Computer, Inc. uname -a Linux Jake 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ----------------------------------------------------------------------------------Solved: I must of done something wrong when I originally installed the latest drivers from the chipset manufacturers website. I tried reinstalling and did modprobe rt3572sta and waited maybe 10 minutes??? and I connected then I rebooted and everything seems to be working so far. What I did do before hand is unplug the device and typed into the terminal (once for every source I attempted to install): cd '<directory of the driver source>' make uninstall make clean Then I went into the 2.5.0.0 directory and installed that with make make install Then I typed modprobe rt3572sta This was all in superuser. For those who don't know: sudo su

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >