Search Results

Search found 2745 results on 110 pages for 'waiting'.

Page 92/110 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• IIS 7.5 FTPS external access - 534 Policy requires SSL

  - by markmnl

  I have setup a FTP site that requires SSL but when I try connect to it externally I get the error: 220 Microsoft FTP Service 534 Policy requires SSL. I know - I set it so! Why doesnt it fetch the SSL cert from the site and allow me to logon?! (Incidentally beware of all the tutorials that Allow but do not Require SSL - while that will solve the problem it will be because SSL is not being used!). I suspect it may be I need a client that supports FTPS (FTP over SSL) and Windows explorer just uses IE which does not. But trying FileZilla and WinSCP I get a little further but then it hangs on TLS/SSL negotiation expecting a response from the server.... UPDATE: I have tried (from: http://learn.iis.net/page.aspx/309/configuring-ftp-firewall-settings/): Configure the Passive Port Range for the FTP Service. Configure the external IPv4 Address for a Specific FTP Site. Configure the firewall to allow the FTP service to listen on all ports that it opens. Disabling stateful FTP filtering so that Windows Firewall will not block FTP traffic. And still I get (in FileZilla trying both Active and Passive): Status: Connecting to 203.x.x.x:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server The Windows firewall logs unhelpfully have nothing to say.. UPDATE2: Turning the firewall off does not resolve the problem. I cannot believe how difficult it is to get something so simple to work and even once following the documentation it does not work. UPDATE3: Running FileZilla locally connecting through the loopback works in Active mode, in Passive mode I get up to: Command: LIST Response: 150 Opening BINARY mode data connection. Error: GnuTLS error -53: Error in the push function. Turning the firewall off at both ends I can still not connect the client and get the same error as above.

  Read the article

• Getting error while install mod_wsgi on centos6.3 with python 2.7

  - by user825904

  In initially installed yum install mod_wsgi and i think it was linked with python 2.6 Now is there any way to link it with 2.7 I tried configuring from the source and i get this error apxs -c -I/usr/local/include/python2.7 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/lib64/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wformat-security -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.7 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1161:1: warning: "_POSIX_C_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:162:1: warning: this is the location of the previous definition In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1183:1: warning: "_XOPEN_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:164:1: warning: this is the location of the previous definition mod_wsgi.c: In function ‘wsgi_server_group’: mod_wsgi.c:991: warning: unused variable ‘value’ mod_wsgi.c: In function ‘Log_isatty’: mod_wsgi.c:1665: warning: unused variable ‘result’ mod_wsgi.c: In function ‘Log_writelines’: mod_wsgi.c:1802: warning: unused variable ‘msg’ mod_wsgi.c: In function ‘Adapter_output’: mod_wsgi.c:3087: warning: unused variable ‘n’ mod_wsgi.c: In function ‘Adapter_file_wrapper’: mod_wsgi.c:4138: warning: unused variable ‘result’ mod_wsgi.c: In function ‘wsgi_python_term’: mod_wsgi.c:5850: warning: unused variable ‘tstate’ mod_wsgi.c:5849: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_python_child_init’: mod_wsgi.c:7050: warning: unused variable ‘l’ mod_wsgi.c:6948: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_add_import_script’: mod_wsgi.c:7701: warning: unused variable ‘error’ mod_wsgi.c: In function ‘wsgi_add_handler_script’: mod_wsgi.c:8179: warning: unused variable ‘dconfig’ mod_wsgi.c:8178: warning: unused variable ‘sconfig’ mod_wsgi.c: In function ‘wsgi_hook_handler’: mod_wsgi.c:9375: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9377: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9379: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9383: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9403: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9405: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9408: warning: suggest parentheses around assignment used as truth value mod_wsgi.c: In function ‘wsgi_daemon_worker’: mod_wsgi.c:10819: warning: unused variable ‘duration’ mod_wsgi.c:10818: warning: unused variable ‘start’ mod_wsgi.c: In function ‘wsgi_hook_daemon_handler’: mod_wsgi.c:13172: warning: unused variable ‘i’ mod_wsgi.c:13170: warning: unused variable ‘elts’ mod_wsgi.c:13169: warning: unused variable ‘head’ mod_wsgi.c: At top level: mod_wsgi.c:8142: warning: ‘wsgi_set_user_authoritative’ defined but not used mod_wsgi.c:15251: warning: ‘wsgi_hook_check_user_id’ defined but not used /usr/lib64/apr-1/build/libtool --silent --mode=link gcc -o mod_wsgi.la -rpath /usr/lib64/httpd/modules -module -avoid-version mod_wsgi.lo -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/bin/ld: /usr/local/lib/libpython2.7.a(abstract.o): relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libpython2.7.a: could not read symbols: Bad value collect2: ld returned 1 exit status apxs:Error: Command failed with rc=65536 . make: *** [mod_wsgi.la] Error 1 Waiting for Graham

  Read the article

• How to set up a mini call center?

  - by Ralph

  I'm trying to figure out how to set up a miniature call center for a small business. Like, for 1-4 people to take calls, but hopefully expandable to more. We want to accept nation-wide calls, and then I guess distribute the calls among the available agents. If no one is available, I guess it should either put them in a queue and play some annoying music for them, or forward to call to an agent who has least-recently taken a call who can then quickly answer and say "please hold" until they're done their call. We want to have one phone number that customers can call. I guess we then need some kind of ACD system which would take each call and forward it to an agent based on some algorithm? Then we would need to purchase a separate phone line for each agent, plus one just for the distributor? Or do we need several "extra" lines to maintain a queue (one for each customer waiting too)? This "ACD" thing, is it just a device that you would plug a phone line into (or several?), and maybe connect to a computer, aided by some software? Or is a subscription thing that I would need from my local telephone provider? Next, the business we're running, the callers will be repeat customers. It would be helpful to automatically pull up their profile based on the incoming number. The "software" our agents will be running will just be a website where they can log in (preferably from home) and then enter some information they would obtain through the call. So, the system would have to somehow interface with the website if possible. If not, we'll just have to ask each customer for an identifier (phone number, username, customer number, or something). Is this possible? I guess each computer would need a device that the call would pass through, and then if I can somehow hook into that, then I can write some software that will interface with the site. So, where do I start? What hardware do we need to buy? What subscriptions do we need? We were thinking this magicJack might help us in accepting long-distance calls for cheaper, but my understanding is that they provide you with some weird-looking number, is there a way we could "mask" it with our toll-free number? And then pass the incoming calls through the distributor system, which would then get passed to the call-accepting device which would both allow an agent to answer the call and have a software hook? (I realize this might be partially out of the scope of SU, but I wasn't sure where else to ask. It is about computer(-aided) hardware and software anyway.) P.S.: I don't need any of that "press 1 to talk to..." or "say xyz to..." junk. Just a straight-forward, connect-to-next-available-agent system.

  Read the article

• mailman web UI on localhost with apache2

  - by Thufir

  I'm interested only in running mailman on localhost and would like access to the web interface, but am getting 404: root@dur:~# root@dur:~# ln -s /etc/mailman/apache.conf /etc/apache2/sites-enabled/mailman -v `/etc/apache2/sites-enabled/mailman' -> `/etc/mailman/apache.conf' root@dur:~# root@dur:~# service apache2 restart * Restarting web server apache2 ... waiting . [ OK ] root@dur:~# root@dur:~# curl http://localhost/mailman/admin/ <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>404 Not Found</title> </head><body> <h1>Not Found</h1> <p>The requested URL /mailman/admin/ was not found on this server.</p> <hr> <address>Apache/2.2.22 (Ubuntu) Server at localhost Port 80</address> </body></html> root@dur:~# root@dur:~# tail /var/log/apache2/error.log [Mon Aug 27 13:08:02 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman [Mon Aug 27 13:10:16 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman [Mon Aug 27 13:29:27 2012] [notice] caught SIGTERM, shutting down [Mon Aug 27 13:29:27 2012] [error] python_init: Python version mismatch, expected '2.7.2+', found '2.7.3'. [Mon Aug 27 13:29:27 2012] [error] python_init: Python executable found '/usr/bin/python'. [Mon Aug 27 13:29:27 2012] [error] python_init: Python path being used '/usr/lib/python2.7/:/usr/lib/python2.7/plat-linux2:/usr/lib/python2.7/lib-tk:/usr/lib/python2.7/lib-old:/usr/lib/python2.7/lib-dynload'. [Mon Aug 27 13:29:27 2012] [notice] mod_python: Creating 8 session mutexes based on 6 max processes and 25 max threads. [Mon Aug 27 13:29:27 2012] [notice] mod_python: using mutex_directory /tmp [Mon Aug 27 13:29:28 2012] [notice] Apache/2.2.22 (Ubuntu) mod_python/3.3.1 Python/2.7.3 mod_ruby/1.2.6 Ruby/1.8.7(2011-06-30) configured -- resuming normal operations [Mon Aug 27 13:29:58 2012] [error] [client 127.0.0.1] File does not exist: /var/www/mailman root@dur:~# Although I did have to tinker a bit with mailmain to get that recognized. While I don't need to setup web access using MM list passwords, I would like to setup web admin to add/remove mailing lists. How do I configure apache or mailman so that I can navigate to http://localhost/mailman/admin/? As per installing mailman, I setup aliases as so: root@dur:~# root@dur:~# cat /etc/aliases usenet: root ## mailman mailing list mailman: "|/var/lib/mailman/mail/mailman post mailman" mailman-admin: "|/var/lib/mailman/mail/mailman admin mailman" mailman-bounces: "|/var/lib/mailman/mail/mailman bounces mailman" mailman-confirm: "|/var/lib/mailman/mail/mailman confirm mailman" mailman-join: "|/var/lib/mailman/mail/mailman join mailman" mailman-leave: "|/var/lib/mailman/mail/mailman leave mailman" mailman-owner: "|/var/lib/mailman/mail/mailman owner mailman" mailman-request: "|/var/lib/mailman/mail/mailman request mailman" mailman-subscribe: "|/var/lib/mailman/mail/mailman subscribe mailman" mailman-unsubscribe: "|/var/lib/mailman/mail/mailman unsubscribe mailman" root@dur:~# Perhaps these can be used somehow?

  Read the article

• Apache : Illegal override option FileInfo

  - by Kave

  I have installed a new Ubuntu 12.04 Server and setup Apache and MySQL. I am just trying to replicate what I have in my current server and came across one single problem. - FileInfo Within these two files below: /etc/apache2/sites-available/default-ssl /etc/apache2/sites-available/default I need to add some overrides for the apache server. Original: <Directory /var/www/MySite> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> New: <Directory /var/www/MySite> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo, Indexes Order allow,deny allow from all </Directory> I have installed the following mods for Apache: sudo apt-get install lamp-server^ -y sudo apt-get install apache2.2-common apache2-utils openssl openssl-blacklist openssl-blacklist-extra -y sudo apt-get install curl libcurl3 libcurl3-dev php5-curl -y sudo apt-get install php5-tidy -y sudo apt-get install php5-gd -y sudo apt-get install php-apc -y sudo apt-get install memcached -y sudo apt-get install php5-memcache -y sudo a2enmod ssl sudo a2enmod rewrite sudo a2enmod headers sudo a2enmod expires sudo a2enmod php5 So When I do a restart with AllowOverride None, its all ok. sudo /etc/init.d/apache2 restart * Restarting web server apache2 ... waiting [OK] But as soon as I change the AllowOverride to FileInfo, Indexes Syntax error on line 11 of /etc/apache2/sites-enabled/000-default: Illegal override option FileInfo, Action 'configtest' failed. The Apache error log may have more information. ...fail! I can't see anything unusual in the error.log [Wed Jun 06 08:23:51 2012] [notice] caught SIGTERM, shutting down [Wed Jun 06 08:23:52 2012] [warn] RSA server certificate CommonName (CN) `mySite.com' does NOT match server name!? [Wed Jun 06 08:23:52 2012] [warn] RSA server certificate CommonName (CN) `mySite.com' does NOT match server name!? [Wed Jun 06 08:23:52 2012] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.10-1ubuntu3.1 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/1.0.1 configured -- resuming normal operations I get that warning because its a test server, nonetheless I get the same warning with AllowOverride None and yet it restarts the Apache server correctly. Therefore this warning should be harmless. Have I missed something? Thanks,

  Read the article

• vagrant up command very slow on OS X Lion

  - by Andy Hume

  When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

  Read the article

• VirtualBox guest responds to ping but all ports closed in nmap

  - by jeremyjjbrown

  I want to setup a test database on a vm for development purposes but I cannot connect to the server via the network. I've got Ubuntu 12.04vm installed on 12.04 host in Virtualbox 4.2.4 set to - Bridged network mode - Promiscuous Allow All When I try to ping the virtual guest from any network client I get the expected result. PING 192.168.1.209 (192.168.1.209) 56(84) bytes of data. 64 bytes from 192.168.1.209: icmp_req=1 ttl=64 time=0.427 ms ... Internet access inside the vm is normal But when I nmap it I get nothin! jeremy@bangkok:~$ nmap -sV -p 1-65535 192.168.1.209 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:39 CST Nmap scan report for jeremy (192.168.1.209) Host is up (0.0032s latency). All 65535 scanned ports on jeremy (192.168.1.209) are closed Service detection performed. Please report any incorrect results at http://nmap.org/submit/ Nmap done: 1 IP address (1 host up) scanned in 0.88 seconds ufw and iptables on VM... jeremy@jeremy:~$ sudo service ufw stop [sudo] password for jeremy: ufw stop/waiting jeremy@jeremy:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have scanned around and have no reason to believe that my router is blocking internal ports. jeremy@bangkok:~$ nmap -v 192.168.1.2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:44 CST Initiating Ping Scan at 18:44 Scanning 192.168.1.2 [2 ports] Completed Ping Scan at 18:44, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 18:44 Completed Parallel DNS resolution of 1 host. at 18:44, 0.03s elapsed Initiating Connect Scan at 18:44 Scanning 192.168.1.2 [1000 ports] Discovered open port 445/tcp on 192.168.1.2 Discovered open port 139/tcp on 192.168.1.2 Discovered open port 3306/tcp on 192.168.1.2 Discovered open port 80/tcp on 192.168.1.2 Discovered open port 111/tcp on 192.168.1.2 Discovered open port 53/tcp on 192.168.1.2 Discovered open port 5902/tcp on 192.168.1.2 Discovered open port 8090/tcp on 192.168.1.2 Discovered open port 6881/tcp on 192.168.1.2 Completed Connect Scan at 18:44, 0.02s elapsed (1000 total ports) Nmap scan report for 192.168.1.2 Host is up (0.0017s latency). Not shown: 991 closed ports PORT STATE SERVICE 53/tcp open domain 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 3306/tcp open mysql 5902/tcp open vnc-2 6881/tcp open bittorrent-tracker 8090/tcp open unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds Answer... Turns out all of the ports were open to the network. I installed open ssh and confirmed it. Then I edited my db conf to listen to external IP's and all was well.

  Read the article

• Problems sending and receiving data between php and perl?

  - by Chip Gà Con

  I have a problem in sending and receiving data between php and perl socket: -Problem: +php can not send all byte data to perl socket +Perl socket can not receiving all data from php . Here code php: function save(){ unset($_SESSION['info']); unset($_SESSION['data']); global $config,$ip; $start=$_POST['config']; $fp = fsockopen($_SESSION['ip'], $config['port'], $errno, $errstr, 30); if(!$fp) { $_SESSION['info']="Not connect "; transfer("Not connect".$ip, "index.php?com=server&act=info"); } else { $_SESSION['info']="Save config - ".$ip; fwrite($fp,$start); transfer("Sending data to ".$ip, "index.php?com=server&act=info"); } } Here code perl socket: #!/usr/bin/perl use strict; use warnings; use Carp; use POSIX qw( setsid ); use IO::Socket; $| = 1; my $socket = new IO::Socket::INET ( LocalHost => '192.168.150.3', LocalPort => '5000', Proto => 'tcp', Listen => 5, Reuse => 1 ); die "Coudn't open socket" unless $socket; print "\nTCPServer Waiting for client on port 5000"; my $client_socket = ""; while ($client_socket = $socket->accept()) { my $recieved_data =" "; my $send_data=" "; my $peer_address = $client_socket->peerhost(); my $peer_port = $client_socket->peerport(); print "\n I got a connection from ( $peer_address , $peer_port ) "; print "\n SEND( TYPE q or Q to Quit):"; $client_socket->recv($recieved_data,20000); #while (defined($recieved_data = <$client_socket>)) { if ( $recieved_data eq 'q' or $recieved_data eq 'Q' ) { close $client_socket; last; } elsif ($recieved_data eq 'start' or $recieved_data eq 'START' ) { $send_data = `/etc/init.d/squid start`; } elsif ($recieved_data eq 'restart' or $recieved_data eq 'RESTART' ) { $send_data = `/etc/init.d/squid restart`; } elsif ($recieved_data eq 'stop' or $recieved_data eq 'STOP' ) { $send_data = `/etc/init.d/squid stop`; } elsif ($recieved_data eq 'hostname' or $recieved_data eq 'HOSTNAME' ) { $send_data= `hostname`; } elsif ($recieved_data eq 'view-config' or $recieved_data eq 'VIEW-CONFIG' ) { $send_data = `cat /etc/squid/squid.conf` ; } else { # print $recieved_data; open OUTPUT_FILE, '> /root/data' or die("can not open file"); print OUTPUT_FILE $recieved_data; close OUTPUT_FILE } #} if ($send_data eq 'q' or $send_data eq 'Q') { $client_socket->send ($send_data); close $client_socket; last; } else { $client_socket->send($send_data); } }

  Read the article

• Directory listing through FTPS (TLS) is not working

  - by Aron Rotteveel

  We recently switched our server to require TLS for every connection. This is working flawlessly so far, but one of our clients is having problems. Some facts: Server uses Pure-FTPD Server has a passive port range configured Server has no firewall limitations regarding the FTP Client uses WS FTP Client is behind a router Client connects to the same IP as every other, using PASSIVE mode All other clients have no trouble connecting Because of the TLS requirement, connecting using ACTIVE mode is almost not possible, but PASSIVE is working fine for everyone except this specific client. It seems that he is able to connect, but once a LIST command is performed, things go wrong. Log: Finding Host <clienthost> ... Connecting to <serverip:21> Connected to <serverip:21> in 0.020000 seconds, Waiting for Server Response Initializing SSL Session ... 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 5 of 50 allowed. 220-Local time is now 22:14. Server port: 21. 220-This is a private system - No anonymous login 220-IPv6 connections are also welcome on this server. 220 You will be disconnected after 15 minutes of inactivity. AUTH TLS 234 AUTH TLS OK. SSL session NOT set for reuse SSL Session Started. Host type (1): Automatic Detect USER <user> 331 User <user> OK. Password required PASS (hidden) 230-User <user> has group access to: <user> 230 OK. Current restricted directory is / SYST 215 UNIX Type: L8 Host type (2): Unix (Standard) PBSZ 0 200 PBSZ=0 PROT P 200 Data protection level set to "private" PWD 257 "/" is your current location CWD /public_html 250 OK. Current directory is /public_html PWD257 "/public_html" is your current location TYPE A 200 TYPE is now ASCII PASV 227 Entering Passive Mode (<serverip>,132,100) connecting data channel to <serverip>:132,100(33892) Substituting connection address <serverip> for private address <serverip> from PASV Using external address <customer ext. ip> instead of local address <customer int. ip> for PORT command PORT 82,161,56,225,195,181 200 PORT command successful LIST Error reading response from server. It appears that the connection is dead. Attempting reconnect... Any help is appreciated.

  Read the article

• Magento - Users unable to login from corporate networks with Bluecoat / F5 Load balancers

  - by user1330440

  Hoping someone has come across this issue before with Magento and corporate clients. We have two clients for our Magento site who both have their internal networks setup using bluecoat security devices and F5 load balancers. Some users within these networks are unable to login to Magento - Magento eventually is sending a 302 redirect to /index.php/ when users attempt to log in. Through our testing, the problem appears to be isolated to this setup - we can log into the accounts in question from anywhere outside of these networks without issue, and if the client tries to access the site without going through the F5 load balancer, they are able to log in successfully. Strangely enough, the issue only started occurring for the two sites the day after we introduced a system upgrade which added a new site to the Magento installation. The system upgrade should not have affected any standard login functionality, and as said, the problem does not appear to be with the users in question, but with where the users are accessing the site from. Initially we thought the issue might have something to do with communications between the client's networks and the network which the server was hosted on, so we've tried moving the server to different hosts, but this has not helped. I'm currently waiting for more info from the clients on exact devices / models used in their network setup. I will update this post if more information becomes avaliable. Magento version is enterprise edition of ver. 1.9.0.0 Does anyone know of any tucked away Magento settings that might be able to cause this kind of behavior? Experience with this kind of set-up and ideas for things to look at? All help and ideas for things to follow-up would be appreciated - as this is a current production issue for a large number of users. I will respond asap with any requests for additional information on the topic, but currently am not able to disclose any identifying information on the project in question, and/or the clients experiencing issues. Thanks in advance for any assistance offered :) Note: This question has also been posted on the Magento forums: http://www.magentocommerce.com/boards/viewthread/277917/ And also on Stack overflow (Moved here as a commenter thought this site may be better suited): http://stackoverflow.com/questions/10133978/magento-users-unable-to-login-from-corporate-networks-with-bluecoat-f5-load

  Read the article

• MySQL daemon keeps terminating unexpectedly

  - by Yehia A.Salam

  The MySQL daemon on my CentOS server keeps crashing, i got the logs from /var/logs/mysqld but still i am not sure how to fix this: 121114 16:22:56 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 121114 21:55:11 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121114 21:55:11 [Note] Plugin 'FEDERATED' is disabled. 121114 21:55:11 InnoDB: The InnoDB memory heap is disabled 121114 21:55:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121114 21:55:11 InnoDB: Compressed tables use zlib 1.2.3 121114 21:55:11 InnoDB: Using Linux native AIO 121114 21:55:11 InnoDB: Initializing buffer pool, size = 128.0M 121114 21:55:11 InnoDB: Completed initialization of buffer pool 121114 21:55:11 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 121114 21:55:11 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 121114 21:55:12 InnoDB: Waiting for the background threads to start 121114 21:55:13 InnoDB: 1.1.6 started; log sequence number 77177262 121114 21:55:13 [Note] Event Scheduler: Loaded 0 events 121114 21:55:13 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.5.12' socket: '/var/lib/mysql/mysql.sock' port: 3306 MySQL Community Server (GPL) by Remi 121115 00:19:44 mysqld_safe Number of processes running now: 0 121115 00:19:44 mysqld_safe mysqld restarted 121115 0:19:47 [Note] Plugin 'FEDERATED' is disabled. 121115 0:19:47 InnoDB: The InnoDB memory heap is disabled 121115 0:19:47 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121115 0:19:47 InnoDB: Compressed tables use zlib 1.2.3 121115 0:19:47 InnoDB: Using Linux native AIO 121115 0:19:47 InnoDB: Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 121115 0:19:47 InnoDB: Completed initialization of buffer pool 121115 0:19:47 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121115 0:19:47 [ERROR] Plugin 'InnoDB' init function returned error. 121115 0:19:47 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121115 0:19:47 [ERROR] Unknown/unsupported storage engine: InnoDB 121115 0:19:47 [ERROR] Aborting Edit #1 total used free shared buffers cached Mem: 496 370 126 0 24 110 -/+ buffers/cache: 234 261 Swap: 1023 9 1014 Edit #2 Also, largest table in my mysql is 20MB, so my the memory used should be pretty moderate. SELECT CONCAT(table_schema, '.', table_name), CONCAT(ROUND(table_rows / 1000000, 2), 'M') rows, CONCAT(ROUND(data_length / ( 1024 * 1024 * 1024 ), 2), 'G') DATA, CONCAT(ROUND(index_length / ( 1024 * 1024 * 1024 ), 2), 'G') idx, CONCAT(ROUND(( data_length + index_length ) / ( 1024 * 1024 * 1024 ), 2), 'G') total_size, ROUND(index_length / data_length, 2) idxfrac FROM information_schema.TABLES ORDER BY data_length + index_length DESC LIMIT 10;

  Read the article

• chkdsk, SeaTools, and "does not have enough space to replace bad clusters"

  - by Zian Choy

  When I tried to do a Windows Vista Complete PC Backup, I received an error message that blathered about bad sectors. Then, when I ran chkdsk /r on the destination drive, this is what I got: C:\Windows\system32>chkdsk /R E: The type of the file system is NTFS. Volume label is Desktop Backup. CHKDSK is verifying files (stage 1 of 5)... 822016 file records processed. File verification completed. 1 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)... 848938 index entries processed. Index verification completed. 0 unindexed files processed. CHKDSK is verifying security descriptors (stage 3 of 5)... 822016 security descriptors processed. Security descriptor verification completed. 13461 data files processed. CHKDSK is verifying file data (stage 4 of 5)... The disk does not have enough space to replace bad clusters detected in file 239649 of name . The disk does not have enough space to replace bad clusters detected in file 239650 of name . The disk does not have enough space to replace bad clusters detected in file 239651 of name . An unspecified error occurred.f 822000 files processed) Yet, when I ran the SeaTools short & long generic tests on the Seagate disk, I didn't receive any errors. I know that I could reformat the disk and try running chkdsk /r again but I'd prefer to avoid waiting 4 hours in the hope that the problem was magically fixed. On the other hand, if I RmA the drive to Seagate, I have no SeaTools error number to use and they may claim that the drive is just fine. What should I try to do next? Side frustration: There is plenty of free hard drive space. The E: partition has 182 GB free.

  Read the article

• OS X Snow Leopard 10.6 Refuses to Load Websites the first time intermittently

  - by Brandon

  Many times when I am browsing the web, Snow Leopard will sit and load a site for 20 seconds or more, until it times out and says it cannot be displayed. If I refresh, it loads RIGHT away, every time. The issue is intermittent but happens from once every couple of days to a few times a day. So the long and short of it is this: Aluminum MacBook (Non-Pro) 2.4GHz Core2Duo, 4GB DDR3 I am using 10.6.6 but I have had this issue since 10.6.0 It happens in Firefox, Chrome, and Safari I have flushed my DNS (using the command 'blablabla flush') I am using custom DNS servers which I hoped would fix it but it had no effect* I am running Apache currently but haven't been for most of the time I've reformatted multiple times, always experiencing the issue I am on Cox cable internet, with a Motorola Surfboard & a Belkin F6D4230-4 v1 (Pre?) N wireless router. I've put the router in G only & N only & G+N to no effect It seems to be domain dependant as I can sometimes load the Google cache right away, and sometimes other sites will load but Google will refuse My Powerbook G4 with Leopard, other Windows XP laptops, & my wired Win7 desktop do not suffer from the issue. *I recently started using these to escape the awful Cox redirect page on timeouts I'm almost positive the issue has happened on other networks but I can't recall a specific instance (I have a terrible memory). The problem is intermittent and fixable enough (I just have to wait until it times out and hit refresh one time) but incredibly annoying since I'm constantly reading documentation from a large variety of sites. EDIT: To clarify, this happens with ALL sites, not only specific sites. I haven't been able to detect any pattern to the failures, but one day Google.com will refuse to load while reddit.com will, and the next day vice versa. Keep in mind that waiting for a timeout and hitting refresh loads the page right away, every time. If I don't wait for the timeout, opening more links, hitting refresh, and clicking the link a billion times have no effect. It seems to be domain neutral, affecting sites seemingly at random. It doesn't seem to have anything to do with connection inactivity either, because I will be SSHed into different servers, uploading files, browsing, downloading, etc, and it will just quit loading Jquery.com (for example) until I sit and wait for a timeout. /EDIT This is my last resort. Please, someone, tell me what is happening. Thank you.

  Read the article

• Access denied to mysql cause by invalid server hostname bind address

  - by Mark

  I cannot login to mysql using the terminal. [root@fst mysql]# mysql -h localhost -u admin -p Enter password: ERROR 1045 (28000): Access denied for user 'admin'@'localhost' (using password: YES) I am sure I have the correct password. The mysql is also running when I check status. The mysql database is also present in the directory /var/lib/mysql/. The host host.myi, host.myd and host.frm are present. By the way this a related to question on my previous problem MySQL server quit without updating PID file . Initially the problem arise when the root directory was full. To be able to login to directadmin and start mysql, I added a soft link of the /var/lib/mysql/ to /home/mysql. Since my database used up the most of the root directory. The root directory has 50Gb and /home has 1.5Gb. Somehow the /var/lib/mysql/idbdata1 is corrupted. So I move it to another location. Now, I can start the mysql server but I cannot login into it. Below are the contents from the myql logs. 121212 20:44:10 mysqld_safe mysqld from pid file /var/lib/mysql/fst.srv.net.pid ended 121212 20:44:10 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121212 20:44:10 [Note] Plugin 'FEDERATED' is disabled. 121212 20:44:10 InnoDB: The InnoDB memory heap is disabled 121212 20:44:10 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121212 20:44:10 InnoDB: Compressed tables use zlib 1.2.3 121212 20:44:10 InnoDB: Using Linux native AIO 121212 20:44:10 InnoDB: Initializing buffer pool, size = 128.0M 121212 20:44:10 InnoDB: Completed initialization of buffer pool 121212 20:44:10 InnoDB: highest supported file format is Barracuda. 121212 20:44:11 InnoDB: Waiting for the background threads to start 121212 20:44:12 InnoDB: 1.1.8 started; log sequence number 1595675 121212 20:44:12 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121212 20:44:12 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121212 20:44:12 [Note] Server socket created on IP: '0.0.0.0'. 121212 20:44:12 [Note] Event Scheduler: Loaded 0 events 121212 20:44:12 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.27-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 MySQL Community Server (GPL) I guess there is something wrong with the bind address. How should I fix the problem?

  Read the article

• Torque jobs does not enter "E" state (unless "qrun")

  - by Vi.

  Jobs I add to the queue stays there in "Queued" state without attempts to be executed (unless I manually qrun them) /var/spool/torque/server_logs say just 04/11/2011 12:43:27;0100;PBS_Server;Job;16.localhost;enqueuing into batch, state 1 hop 1 04/11/2011 12:43:27;0008;PBS_Server;Job;16.localhost;Job Queued at request of test@localhost, owner = test@localhost, job name = Qqq, queue = batch The job requires just 1 CPU on 1 node. # qmgr -c "list queue batch" Queue batch queue_type = Execution total_jobs = 0 state_count = Transit:0 Queued:0 Held:0 Waiting:0 Running:0 Exiting:0 max_running = 3 acl_host_enable = True acl_hosts = localhost resources_min.ncpus = 1 resources_min.nodect = 1 resources_default.ncpus = 1 resources_default.nodes = 1 resources_default.walltime = 00:00:10 mtime = Mon Apr 11 12:07:10 2011 resources_assigned.ncpus = 0 resources_assigned.nodect = 0 kill_delay = 3 enabled = True started = True I can't set resources_assigned to nonzero because of Cannot set attribute, read only or insufficient permission resources_assigned.ncpus. When I qrun some task, this goes to mom's log: 04/11/2011 21:27:48;0001; pbs_mom;Svr;pbs_mom;LOG_DEBUG::mom_checkpoint_job_has_checkpoint, FALSE 04/11/2011 21:27:48;0001; pbs_mom;Job;TMomFinalizeJob3;job 18.localhost started, pid = 28592 04/11/2011 21:27:48;0080; pbs_mom;Job;18.localhost;scan_for_terminated: job 18.localhost task 1 terminated, sid=28592 04/11/2011 21:27:48;0008; pbs_mom;Job;18.localhost;job was terminated 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;top of preobit_reply 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;DIS_reply_read/decode_DIS_replySvr worked, top of while loop 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;in while loop, no error from job stat 04/11/2011 21:27:48;0080; pbs_mom;Job;18.localhost;obit sent to server Scheduler log (/var/spool/torque/sched_logs/20110705): 07/05/2011 21:44:53;0002; pbs_sched;Svr;Log;Log opened 07/05/2011 21:44:53;0002; pbs_sched;Svr;TokenAct;Account file /var/spool/torque/sched_priv/accounting/20110705 opened 07/05/2011 21:44:53;0002; pbs_sched;Svr;main;/usr/sbin/pbs_sched startup pid 16234 qstat -f: Job Id: 26.localhost Job_Name = qwe Job_Owner = test@localhost job_state = Q queue = batch server = localhost Checkpoint = u ctime = Tue Jul 5 21:43:31 2011 Error_Path = localhost:/home/test/jscfi/default/0.738784810485275/qwe.e26 Hold_Types = n Join_Path = n Keep_Files = n Mail_Points = a mtime = Tue Jul 5 21:43:31 2011 Output_Path = localhost:/home/test/jscfi/default/0.738784810485275/qwe.o26 Priority = 0 qtime = Tue Jul 5 21:43:31 2011 Rerunable = True Resource_List.ncpus = 1 Resource_List.neednodes = 1:ppn=1 Resource_List.nodect = 1 Resource_List.nodes = 1:ppn=1 Resource_List.walltime = 00:01:00 substate = 10 Variable_List = PBS_O_HOME=/home/test,PBS_O_LANG=en_US.UTF-8, PBS_O_LOGNAME=test, PBS_O_PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games, PBS_O_MAIL=/var/mail/test,PBS_O_SHELL=/bin/sh,PBS_SERVER=127.0.0.1, PBS_O_WORKDIR=/home/test/jscfi/default/0.738784810485275, PBS_O_QUEUE=batch,PBS_O_HOST=localhost euser = test egroup = test queue_rank = 1 queue_type = E etime = Tue Jul 5 21:43:31 2011 submit_args = run.pbs Walltime.Remaining = 6 fault_tolerant = False How to make it execute jobs automatically, without manual qrun?

  Read the article

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

• Detach current session and attach to another session, done with one script, can I?

  - by Jimm Chen

  After reading the vague official doc of GNU screen( http://www.gnu.org/software/screen/manual/screen.html ) and asking quite some questions at this site. I still cannot figure out how to accomplish such a task with a shell script. This task costs some words to describe. Assume I'm using PuTTY to telnet into my Linux server. ?STEP 1? Launch 2 telnet connections . From putty window 1 (PTWIN1),telnet into Linux Bash shell, execute screen -RR to launch a screen session, and get session name 21385.pts-4.linux-ic37 . From putty window 2 (PTWIN2), do that same as in PTWIN1, but this time, I get session name 22041.pts-9.linux-ic37 . Now, we have two screen sessions running simultaneously. We can check this: $ screen -ls There are screens on: 22041.pts-9.linux-ic37 (Attached) 21385.pts-4.linux-ic37 (Attached) 2 Sockets in /var/run/uscreens/S-chj2. ?STEP 2? Assume that for some reason, PTWIN1's TCP connection is lost abnormally(but server doesn't know that), and an urgent work is pending on session 21385 and I want to quickly regain control of it. Fortunately, we know the 21385 session is still there, so, I want to have PTWIN2 attach to session 21385. Because I hate to remember the esoteric screen option all the time, so I decide to write a script called sttach. I hope that sttach 21385.pts-4.linux-ic37 can let me attach to session 21385(for PTWIN2). Now, let's say sttach works well and I take control of 21385 on PTWIN2. ?STEP 3? Some minutes later. I want to go back to work on session 22041. Here, please allow me to have PTWIN2 remain associated with session 21385. What I would like to do is to launch another putty window (PTWIN3), telnet into server, and execute sttach 22041.pts-9.linux-ic37 in hope that I can resume session 22041 on PTWIN3 . You can see the benefit of sttach: as long as I know the target session name, I can call it to have my PuTTY window switch to that session, regardless whether the target session is "(Attached)" or "(Detached)", and regardless whether the running context is inside a screen session or not. Now the question: How to write the (Bash) script sttach? I mean, run screen with appropriate options in sttach to accomplish the goal. Waiting for your kind answer. Thank you. My previous questions regarding GNU screen: GNU screen, how to get current sessionname programmatically Is it possible to change GNU screen session name after created? How do I know I'm running inside a linux "screen" or not? My env: openSUSE Linux 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06

  Read the article

• Xubuntu login hangs after Cancel Button click

  - by akester

  I'm running Xubuntu 12.04 (I installed using the alternative installer.) running in Virtaulbox 4.1.20 My issue is with the login screen (lightdm-gtk-greeter). It usually runs just fine, and allows users to log in and out but it will hang if the user presses the cancel button. The interface is still working (ie, shutdown menu is still available, I can switch to a different tty) but the username or password field (depending on when the button is hit) is disabled. Restarting lightdm will reset the screen, but the problem still exists. The issue is only with the cancel button. The login, session, and language buttons/menus as well as the accessibility and shutdown menu appear to work normally. I've modified some of the config files for lighdm-gtk-greeter, specifically /etc/lightdm/lighdm-gtk-greeter.conf to change the background image and /etc/lightdm/lightdm.conf to disable the user list. I did not check to see if the error existed before the changes took place. The changes have been restored the default settings but the problem persists. Here is the output of /var/log/lightdm/lightdm.log when the screen is hung: [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=2072 [+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.00s] DEBUG: Registered seat module xlocal [+0.00s] DEBUG: Registered seat module xremote [+0.00s] DEBUG: Adding default seat [+0.00s] DEBUG: Starting seat [+0.00s] DEBUG: Starting new display for greeter [+0.00s] DEBUG: Starting local X display [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.03s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.04s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.04s] DEBUG: Launching X Server [+0.05s] DEBUG: Launching process 2078: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.05s] DEBUG: Waiting for ready signal from X server :0 [+0.05s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.05s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.28s] DEBUG: Got signal 10 from process 2078 [+0.28s] DEBUG: Got signal from X server :0 [+0.28s] DEBUG: Connecting to XServer :0 [+0.29s] DEBUG: Starting greeter [+0.29s] DEBUG: Started session 2082 with service 'lightdm', username 'lightdm' [+0.36s] DEBUG: Session 2082 authentication complete with return value 0: Success [+0.36s] DEBUG: Greeter authorized [+0.36s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+0.36s] DEBUG: Session 2082 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter [+0.58s] DEBUG: Greeter connected version=1.2.1 [+0.58s] DEBUG: Greeter connected, display is ready [+0.58s] DEBUG: New display ready, switching to it [+0.58s] DEBUG: Activating VT 7 [+1.04s] DEBUG: Greeter start authentication for andrew [+1.04s] DEBUG: Started session 2137 with service 'lightdm', username 'andrew' [+1.09s] DEBUG: Session 2137 got 1 message(s) from PAM [+1.09s] DEBUG: Prompt greeter with 1 message(s) [+17.24s] DEBUG: Cancel authentication [+17.24s] DEBUG: Session 2137: Sending SIGTERM

  Read the article

• Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

  - by Tong Wang

  I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• HOSTS ignored when disconnected [closed]

  - by Synetech

  Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

  Read the article

• mysql: job failded to start. mysqld.sock is missing

  - by Freefri

  How can I fix this and start mysql-server? After /etc/init.d/mysql start or service mysql start I get the message start: "Job failed to start" And after # mysqld I get this: mysqld 121123 11:33:33 [ERROR] Can't find messagefile '/usr/share/mysql/errmsg.sys' 121123 11:33:33 [Note] Plugin 'FEDERATED' is disabled. mysqld: Unknown error 1146 121123 11:33:33 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121123 11:33:33 InnoDB: The InnoDB memory heap is disabled 121123 11:33:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121123 11:33:33 InnoDB: Compressed tables use zlib 1.2.3.4 121123 11:33:33 InnoDB: Initializing buffer pool, size = 128.0M 121123 11:33:33 InnoDB: Completed initialization of buffer pool 121123 11:33:33 InnoDB: highest supported file format is Barracuda. 121123 11:33:33 InnoDB: Waiting for the background threads to start 121123 11:33:34 InnoDB: 1.1.8 started; log sequence number 1595675 121123 11:33:34 [ERROR] Aborting 121123 11:33:34 InnoDB: Starting shutdown... 121123 11:33:35 InnoDB: Shutdown completed; log sequence number 1595675 121123 11:33:35 [Note] I try to do what mysql say me to do: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And yes, /var/run/mysql is empty: mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed And this is my file /etc/mysql/my.cnf # cat /etc/mysql/my.cnf |grep sock # Remember to edit /etc/mysql/debian.cnf when changing the socket location. socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock socket = /var/run/mysqld/mysqld.sock Then I try to reinstall mysql from cero: apt-get purge mysql-client mysql-common mysql-server rm -R /var/lib/mysql rm -R /etc/mysql rm -R /var/run/mysqld userdel mysql apt-get install mysql-server mysql-client Then, after typing my root password for mysql I get this error: | Unable to set password for the MySQL "root" user ¦ ¦ ¦ ¦ An error occurred while setting the password for the MySQL administrative ¦ ¦ user. This may have happened because the account already has a password, or ¦ ¦ because of a communication problem with the MySQL server. ¦ ¦ ¦ ¦ You should check the account's password after the package installation. ¦ ¦ ¦ ¦ Please read the /usr/share/doc/mysql-server-5.5/README.Debian file for more ¦ ¦ information. And again I can't start mysql getting the same messages.

  Read the article

• Skyrim: Heavy Performance Issues after a couple of location changes

  - by Derija

  Okay, I've tried different solutions: ENB Series, removing certain mods, checking my FPS Rate, monitoring my resources, .ini tweaks. It's all just fine, I don't see what I'm missing. A couple of days ago, I bought Skyrim. Before I bought the game, I admit I had a pirated copy because my girlfriend actually wanted to buy me the game as a present, then said she didn't have enough money. Sick of waiting, I decided to buy the game by myself. The ridiculous part is, it worked better cracked than it does now uncracked. As the title suggests, after entering and leaving houses a couple of times, my performance obviously drops extremely. My build is just fine, Intel i5 quad core processor, NVIDIA GTX 560 Ti from Gigabyte, actually stock-OC, but manually downclocked to usual settings using appropriate Gigabyte software. This fixed the CTD issues I had before with both Skyrim and BF3. I have 4GB RAM. A website about Game Tweaks suggested that my HDD may be too slow. A screenshot of a Windows Performance Index sample with the subscription "This is likely to cause issues" showed the HDD with a performance index of 5.9, the exact same mine has, so I was playing with the thought to purchase an SSD instead, load games onto it that really need it like Skyrim, and hope it'd do the trick. Unfortunately, SSDs are likewise expensive, compared to "normal" HDDs... I'm really getting desperate about it. My save is gone because the patches made it impossible to load saves of the unpatched version and I already saved more than 80 times despite being only level 8, just because every time I interact with a door leading me to another location I'm scared the game will drop again. I can't even play for 30 mins straight anymore, it's just no fun at all. I've researched for a couple of days before I decided to post my question here. Any help is appreciated, I don't want to regret having bought the game... Since it actually is the best game I've played possibly for ever. Sincerely. P.S.: I don't think it's necessary to say, but still, of course I'm playing on PC. P.P.S.: After monitoring both my PC resources including CPU usage and HDD usage as well as the GPU usage, I don't see any changes even after the said event. P.P.P.S.: Original question posted here where I've been advised to ask here.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Vagrant reporting VirtualBox guest additions out of date

  - by DTest

  Fairly new to Vagrant, so bear with me if I don't understand the process. I downloaded a CentOS box off http://www.vagrantbox.es/ Started it up running VirtualBox 4.2.4 and got this message: [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 So I used the vbguest plugin to update the guest additions, then repackaged the box as suggested. Having replaced the old box and loading it up I get the same message about guest additions being outdated, but vbguest reports that they are up to date (the automatic vbguest update is disabled in my Vagrantfile): Vagrant::Config.run do |config| config.vm.box = "centos56_64" config.vbguest.auto_update = false config.vbguest.no_remote = true end And the commands: dtest$ vagrant up [default] Importing base box 'centos56_64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.0.8 VirtualBox Version: 4.2.4 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- 22 => 2222 (adapter 1) [default] Creating shared folders metadata... [default] Clearing any previously set network interfaces... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant dtest$ vagrant vbguest --no-install [default] Detected Virtualbox Guest Additions 4.2.4 --- OK. [default] Virtualbox Guest Additions on host: 4.2.4 - guest's version is 4.2.4 Since they appear to be updated after an install, I could ignore the message. But is it possible to get rid of it?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >