Search Results

Search found 5245 results on 210 pages for 'william hand'.

Page 92/210 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Can I mix drive types in an HP server?

  - by Generic Error

  I currently have the following setup: HP DL380 G4 Server 6 x 73GB, Ultra160, 10k, SCSI 80 Pin Drives Smart Array 6i Controller RAID 5 One of the drives is failing and needs to be replaced. I have on hand drives that are the same size and type, but are Ultra320, 15k instead. I have verified that these drives work in another system with the same type of drive controller. When I plug one of these in the system simply reports the drive as being offline and has nothing further to do with it. From what I have read these drives should be compatable. Should this work at all and if so, what might be preventing it?

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• Multiple network interfaces and UDP packets distribution

  - by Robert Kubrick

  I have a Linux server with 2 1Gb network interfaces eth1 and eth2. If I start 2 clients listening to the same multicast address and each client connects through a different NIC (say client 1 listens to the multicast through eth1 and client 2 through eth2), then client 2 gets duplicate UDP packets. If both clients use the same interface eth1 on the other hand, both clients work fine. I have already tried to set arp_filter and proxy_arp to 1 (arp flux issue) but it hasn't solved the issue. Is this a Linux kernel problem? Or is there another way to setup the interfaces correctly?

  Read the article

• Readyboost on Windows 7 x64

  - by RobLaw84

  I'm thinking of bying 1 or more flash drives or an SD card to use with the readyboost function on by 64bit Windows 7 machine. I have a few questions regarding it before i put my hand in my pocket and buy anything. If i go ahead I would be using the fastest available flash/SD. I have 6GB of RAM current installed so will readyboost make any difference to boot / program load times? Will 2 x 2GB flash drives be quicker than 1 x 4GB or is the limitation on the motherboard? Would an SD card better than USB flash drive? thanks

  Read the article

• How to arrange 2 SSD with 2 SATA?

  - by alfish

  I like to have best io performance as well as good capaciyy and reliability out of a server that hosts a busy forum, which involves loads of static files download. I am wondering what is the best plan to format and use the disks given that the server has only 4 disk bays and I have 2 SSD and 2 SATA disks at hand. I am currently thinking about putting the disks in RAID 10 so that SSD contains /var/lib/mysql as well as most of the OS (Likely to be Debian) and SATA disk to contain /path/to/static/files. However I'd like to hear your expert opinion on this. Thanks

  Read the article

• Where are incoming messages queued/stored when sendmail is communicating with a milter?

  - by Mike B

  CentOS 5.x | SendMail I'd like to better understand how milter hand-offs work. We a remote MTA initiates an SMTP session, my understanding is that Sendmail hands the message data off to the milter during that session. Where/how is this message data stored? Is this all done in memory? Or is there a "queue" area where message data for milter is stored for pickup by the milter? If it helps, let's say I'm calling a milter like this: INPUT_MAIL_FILTER(`foo', `S=unix:/var/lib/foo/foo.sock, F=T, T=C:5m;S:3m;R:5m;E:5m')dnl

  Read the article

• Customising error bars

  - by itid

  Hello I've been told I HAVE TO have custom error bars for an assignment I have to hand in. Okay, I have a scatter graph with twelve points, and the error for each one is different. It's the same plus and minus, but different for each one. The twelve different error values are sitting nicely in a column. I have been told I can reference that column in "custom error bars" simply by indicating the range of values, like F2-F14. However, I get an error message every time. When I open Custom Error Bars, it is set up like this: ={} obviously waiting for a function. The error message says remove the equals sign. How should I enter the value range, please ?

  Read the article

• Windows 8 on iSCSI with LIO target: thin provisioning

  - by LubosD

  I have installed Windows 8.1 on an iSCSI target. This target is provided by Linux LIO and is backed by a sparse file. One of the reasons I created such an installation was thin provisioning. In other words, when I free disk space on Windows, LIO should punch holes into the file, thus free storage space on the Linux server as well. I have checked my kernel's sources and the SCSI UNMAP command is really supported for file-backed targets. On the other hand, deleting files on Windows doesn't lower the amount of space taken by the backing file on Linux (checked with du). Actually, the backing file sometimes grows even more. Some sources on Google say Win8 should support UNMAP/DISCARD on iSCSI, but even in Wireshark I only see ordinary read and write commands when files are being deleted. Any way to fix or troubleshoot it?

  Read the article

• uploading files greater than 1MB = connection resets

  - by Legit

  I'm using nginx on the frontend as "proxy cache" and apache on the backend, i've set my PHP settings to the following: error_log = /var/www/site1/php_error.log error_reporting = 22527 file_uploads = On log_errors = On max_execution_time = 0 max_file_uploads = 20 max_input_time = -1 memory_limit = 512M post_max_size = 0 upload_max_filesize = 1000M What's the problem? Uploading files less than 1MB is successful but anything greater than that, Google Chrome outputs: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. I already checked for the error log file but it doesn't exist in the directory. I also checked /var/log/httpd/error_log but no uploading related problems. I don't know anything else which might have caused the problem so I have reached out for your helping hand. Thanks!

  Read the article

• Can I use my old Sony Handycam TRV815 as a web cam?

  - by Optimal Solutions

  Has anyone ever used their old Sony Handycam (or maybe any older hand-held camcorder) as a web cam? As in streaming the live video from the cam to a web server (local or remote/Internet). My TRV815 has a pretty darn good picture quality for its time.. Via USB or Ethernet. It has S-Video but I think that is input. It has RCA out (white/red for audio and yellow for video) and I have used that to display to my TV. I have web cams already but was wondering if I could put this one to use also just for kicks..

  Read the article

• Enterprise Data Center System Admin/Engineer to Server Ratio

  - by Bob

  I know there have been similar questions asked over the last few months however looking at a Data Center Operations and know there are some really smart people out there that might be able to help. Looking for some staffing best practices based on first hand experience and was hoping that there is some experience in this area that can provide "best practice" application: Three High Availability (99.99% plus) Enterprise Level Data Centers geographically dislocated, one manned 24x7x365, one lights out, one co-location running HOT-HOT-HOT supporting a global community. More than 2,000 operating systems consisting of 95% Windows, 5% Linux and Solaris, 45% virtualized, more than 100TB storage. No desktop support, no Network Administration (administrated separately), running N+1 and serving more than 250 Billion page views annually. Based on experience what has been your experience with Server to "Data Center System Administrator/Engineer" ratio? Thanks in advance for your responses.

  Read the article

• Multiple PCs - Single profile

  - by martixy

  Or how to create an AD(or similar) environment at home? So... I work in this big IT company(they have and AD environment ofc) and I've seen first hand how nice integration and log-in-from-anywhere(roaming?) profiles can be. So I wanna create the same setup at home, where I have 3 machines. Mostly logging in with the same profile and preserving the settings(things like UAC being off, a few group policies I've customized, things like that). How can I achieve something like this?

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Dual-boot more than two operating systems

  - by aldorado

  I currently run Windows 7 and Ubuntu 12.04 as a dual-boot system. I need Linux, but Ubuntu freezes at least once a day. So I want to replace it with another distribution like Debian or LMDE. On the other hand I am a little concerned that I'll have troubles working with a less user friendly operating system than Ubuntu. So would it be possible to just scale down the Windows partition and install the next Linux as a third system? Thus, with a "triple-boot system" I could keep Ubuntu until I feel familiar with the new system. Afterwards, I guess, it should be possible to replace the Ubuntu partition by expanding the new system?

  Read the article

• Log off as local "administrator" user, get blank login screen

  - by Force Flow

  I have an imaged lab environment running Windows 7 and attached to a domain. The local Administrator account is enabled for certain maintenance and prep tasks. Every time I logoff from the local Administrator account, it brings me back to the standard Ctrl+Alt+Del login screen. When I press that combination, all the user controls vanish except for the accessibility button down in the left hand corner. The only way I can seem to escape from this is to tap the power button to initiate a shutdown. Windows is up-to-date, and logging off as any other user operates normally. The "hide last user" local security policy option is enabled. Has anyone seen this phenomenon before and how can I stop this from happening?

  Read the article

• How to disable password change for openldap user?

  - by Keve

  Considering possible solutions for some improvements I run into this theoretical question and I couldn't find a satisfying answer. Some of you may have first-hand experience with this in practice, so here the question goes: How can I disable password changing for an OpenLDAP user? The account must stay enabled, allowed to log on to workstations and work as usual, but should not be able to change its own password. Can this be done? If so, how difficult is it to implement it? All suggestions are appreciated! For reference: Servers and workstations are to run a mixture of FreeBSD and OpenBSD. Accounts to get password disabled are student or generic workstation accounts. Environment is a school.

  Read the article

• Is there a way to import a scheduled task from windows 2003 (.job) to windows 2008 (.xml) ?

  - by Rodrigo

  I had some jobs to be moved from the old production server (windows 2003 server standard) to the new machine (windows 2008 server standard), but the new server is unable to read the old .job format, also the import wizard only imports from .xml job files (same version). Obviously I don't want to rebuild all the jobs by hand, but can't find a tool that makes the process a very little easier. I don't trust in Microsoft for this kind of tools, my previously experiences had been to bad (DTS - SSIS). Any ideas? Thanks in advance.

  Read the article

• Encryption container for multiple people

  - by Adam M.

  I was just wondering if anyone may have come across a product that would allow for a container based encryption to be used by multiple people, in a Windows Server setup. I wanted to see if there might be something like a truecrypt that could handle being accessed by two accounts? Looking to see if there is a product that would have such properties that would allow only a hand full of users access to the content of the location, but allow for the files to be backed up a normal backup system. That way if a file had to be restored, the container could be redirected to another location for one of the users to get access to it? This would allow for access to be restricted beyond the NTFS and file share permissons

  Read the article

• What components should I upgrade to squeeze more life of my pc? [on hold]

  - by Jared

  Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

  Read the article

• How do synchronize two folders in Windows 7 in real-time?

  - by acme

  I want Windows 7 to synchronize two folders in real time (maybe running a service that monitors a folder)? Basically I want to monitor a folder and synchronize each change (new files, changed files, deleted files) to another drive. It has to be in real time, so it gets synchronized instantly when a change happens. A one-direction synchronisation is enough. I tried Microsofts SyncToy, but it does only syncing by hand or scheduled. Can this be achieved with Windows 7 itself or does anyone know a freeware application for this?

  Read the article

• How to adjust wallpaper to make it fit the screen, for netbook using window 7 starter?

  - by Toan Tran

  I have a netbook, with window 7 starter. I was trying to change the wallpaper, and found this application: John's Background Switcher which said that I can make slide show of themes, I guess it's as you set wallpaper with window 7 ultimate. The default wallpaper was still fine until downloading that application. After trying it, error occurred, I couldnt change the background, so I closed it, but then the default wallpaper changed its size, the central image dropped out of screen, can see aaprt of it on `bottom right hand corner. I tried to adjust the image into center, but it didnt work when i right click on desktop - Graphic option - panel fit - "center image". Anybody can help me? how to adjust it back to normal as original?

  Read the article

• The letter 'W' gets rendered oddly

  - by Jeff E

  It seems that with this particular font (it's one of the Ubuntu fonts; I can't tell which one exactly because Chrome's debugger doesn't tell me which font-family won the CSS battle) the letter 'W' (both cases), at the default zoom level and typically with smaller sizes, will render very oddly: (open the image in a new tab) The right-hand side of the letter is totally wrong. Changing the zoom levels will mitigate (but not eliminate) the issue. Does anyone know how to fix this? It doesn't happen on Firefox or IE so I assume it's not an issue with the font itself.

  Read the article

• Command-line tool to search for file names on offline backup drives

  - by halloleo

  I am looking for an open-source (command-line) tool to register and search all my (backup) drives on a file name level. I want to search for file and folder names preferably written as regular expressions or file glob patterns. The external drives contain just normal HFS and NTFS filesystems. The backups are done via direct file copy. Requirement is that the tool compiles on OS X and works without each of the drives attached, but rather pointing me to the drive in case a drive contains a file with the pattern I searched for. At the moment I use a hand-knit script solution with locate databases, one for each external backup drive, but this is rather cumbersome, because locate itself can accesses only one database at a time and does not contain any management system for all the indices/databases. Are there any other tools out there for this?

  Read the article

• Windows 7 won't recognize my second hard drive after reinstall

  - by Shadur

  I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

  Read the article

• Why would my domain admins turn off UAC? [closed]

  - by DanO

  I'm a developer of internal software in our company, I've gotten used to UAC in Win7, I prefer to run with in enabled so that our software works correctly with it enabled. Sysadmins have recently pushed out GPO that turns it off every time we log-in. (So I turn it back on every time I log in.) I can imagine some people are annoyed by it and turn it off, but is that really a good company-wide decision? anyone annoyed by it (local admins) would already have permission to turn it of themselves.. right? On the other hand we don't have to worry creating UAC friendly software if no workstations or servers have it enabled. Is there a good reason for doing this? Other than reducing help-desk calls from users recently upgraded from XP? I can't see the upside of this decision, help me understand.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >