Search Results

Search found 7823 results on 313 pages for 'leaf dev'.

Page 93/313 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Copying files to zfs mountpoint doesn't work - the files aren't actually copied to the other filesystem,

    - by user113904
    I have 3 x 4 TB disks in a NAS that I want to group together and access as if they were one whole 'unit' of some kind. I also have a 250GB disk containing the OS - this is full of films and tv shows currently. I thought zfs sounded good so I created a raidz zpool, after installing the ppa sudo zpool create store raidz /dev/sdb /dev/sdc /dev/sdd and set the mountpoint to /mnt/store sudo zfs set mountpoint=/mnt/store /store checked it was successful - I think it was sudo zfs list NAME USED AVAIL REFER MOUNTPOINT store 266K 7.16T 170K /mnt/store Then I wanted to move over a whole load of files from my home directory. I went to where the to-be-copied folder was (called media) and entered sudo cp -R * /mnt/store cp: cannot create directory `/mnt/store/media': No space left on device It seems like it's not copying over to the new filesystem I made (or thought I did). I've never really done this type of thing until a few days ago so may be running before I can walk... is this not the right way to copy files across? I've only used windows before so the idea of mountpoints is a bit mind boggling. I'm using XBMCbuntu 12 beta 2.0 which is based on 12.04. Will retry with normal Ubuntu 12.04 desktop to see if that's the problem. thanks for the help!

    Read the article

  • Very slow write access to SSD disks on some Asus P8Z77 motherboards

    - by lenik
    I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

    Read the article

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • Wammu - USB Device Name?

    - by Paul
    I'm trying to get to my phone's filesystem through USB in Wammu, but I'm stuck in the configuration wizard when it asks for a USB device name. After about an hour of Internet searching, here are the failed solutions I've already tried, starting with the relevant information returned by lsusb in terminal. lsusb Bus 001 Device 003: ID 12d1:101e Huawei Technologies Co., Ltd. So I tried opening Wammu through sudo wammu in terminal and inputting "/dev/bus/usb/001/003" as the device name, which returns: Error opening device Device /dev/bus/usb/001/003 does not exist! and then "/dev/bus/usb/001/", which returns: Failed to connect to phone Description: Error opening device. Unknown, busy, or no permissions.<br> Function: Init<br> Error code: 2 Another proposed solution was to try "tail -f /var/log/messages" in terminal. But that only returned a "No such file or directory" message. Seemingly relevant dmesg info: [ 4739.716214] usb 1-1: new high-speed USB device number 8 using ehci_hcd [ 4739.854137] scsi9 : usb-storage 1-1:1.0 [ 4740.854416] scsi 9:0:0:0: CD-ROM HUAWEI T Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4740.867051] sr0: scsi-1 drive [ 4740.867806] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4740.870464] sr 9:0:0:0: Attached scsi generic sg1 type 5 I don't know why it is coming up as CD-ROM. But there it is. If you haven't noticed already, I'm an absolute beginner when it comes to Linux and terminal. So speaking to me like I'm a three year old is welcome if you can propose a solution. I'm running Ubuntu 12.04 LTS, and the phone is a Huawei U1250. My computer is an Acer Aspire One D250/KAV60. Any help is much appreciated.

    Read the article

  • How can I get multitouch enabled on my Sentelic touchpad (msi x350 notebook)?

    - by Jon
    I understand my MSI x350 notebook comes with a Sentelic trackpad, which supports multi-touch (according to the MSI website). Is there a way to enable multitouch on Ubuntu? I've been having difficulty finding info about this on google, and since it's not a synaptics touchpad I haven't been able to find much info in ubuntu docs. My mouse preferences doesn't have a trackpad tab like it does on, say, a Macbook. Running "xinput list" returns: FSPPS/2 Sentelic FingerSensingPad id=11 And in my Xorg.0.log: [ 17.481] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event6) [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall" [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: always reports core events [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event6" [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse [ 17.500] () FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5 [ 17.500] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.500] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes. [ 17.500] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)

    Read the article

  • Failed to spawn test

    - by Lost
    Running a simple test in Ubuntu 12.04: sudo lxc-execute -n test /bin/bash -l debug -o outout Got error message: lxc-execute: failed to spawn 'test' cat outout: lxc-execute 1347053658.113 DEBUG lxc_start - sigchild handler set lxc-execute 1347053658.113 INFO lxc_start - 'test' is initialized lxc-execute 1347053658.366 DEBUG lxc_start - Dropping cap_sys_boot and watching utmp lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/' (rootfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/sys' (sysfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/proc' (proc) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev' (devtmpfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev/pts' (devpts) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/' (ext3) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/fs/fuse/connections' (fusectl) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/debug' (debugfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/security' (securityfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/lock' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/shm' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/rpc_pipefs' (rpc_pipefs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/scratch/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/share' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/proj/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/users/bhu' (nfs) lxc-execute 1347053658.367 ERROR lxc_start - failed to spawn 'test' Run command: sudo lxc-checkconfig Kernel config /proc/config.gz not found, looking in other places... Found kernel config file /boot/config-2.6.38.7-1.0emulab --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/bin/lxc-checkconfig What's the problem? Thanks a lot

    Read the article

  • Install gcc on Ubuntu 12.04 LTS

    - by Brian M. Hunt
    When I try to install gcc on Ubuntu 12.04 LTS Server with apt-get install gcc, I get the following error: The following packages have unmet dependencies: gcc : Depends: cpp (>= 4:4.6.1-2ubuntu5) but it is not going to be installed Depends: gcc-4.6 (>= 4.6.1-1) but it is not going to be installed Recommends: libc6-dev but it is not going to be installed or libc-dev When I delve deeper (i.e. try to apt-get install gcc-4.6), I get: gcc-4.6 : Depends: gcc-4.6-base (= 4.6.1-9ubuntu3) but 4.6.3-1ubuntu5 is to be installed Depends: cpp-4.6 (= 4.6.1-9ubuntu3) but it is not going to be installed Depends: libgomp1 (>= 4.6.1-9ubuntu3) but it is not going to be installed Depends: libquadmath0 (>= 4.6.1-9ubuntu3) but it is not going to be installed Recommends: libc6-dev (>= 2.13-0ubuntu6) but it is not going to be installed So when I try to install gcc-4.6=4.6.1-9ubuntu3 I get a list of 366 packages to remove (including e.g. apt). Which is craziness. This is an essentially vanilla installation of Ubuntu 12.04 LTS Server (i.e. I installed nginx, python-flup, python-yaml, rsync, python-pkg-resources, lsof, fontconfig, iptables, ufw, scons, and grc). It is very surprising to me that I cannot install gcc, so I am somewhat confused as to why attempting to install gcc fails. The only apparent fix would seem to be uninstalling 366 packages, many of which are central to the operation of Ubuntu. Something doesn't add up, and I would be very grateful for assistance. EDIT The above is with the latest packages of course, having used apt-get update; apt-get upgrade before attempting the above. Sorry, I should have mentioned that.

    Read the article

  • How do I install kivy?

    - by aspasia
    I was trying to install Kivy (by following the instructions here). I downloaded and installed all packages where the installation process went through without giving me any errors. However, when later I enter below command; sudo easy_install kivy It looked like it was going to work but it ends with an error by displaying following lines, which I don't comprehend: Detected compiler is unix /tmp/easy_install-BtOA_u/Kivy-1.8.0/kivy/graphics/texture.c:8:22: fatal error: pyconfig.h: No such file or directory #include "pyconfig.h" ^ compilation terminated. error: Setup script exited with error: command 'x86_64-linux-gnu-gcc' failed with exit status 1 I saw a similar question asked as; Problem with kivy installation. However, this didn't work for me though the question suggests installing libgles-mesa-dev-lts-raring which I did as below; sudo apt-get install libgles-mesa-dev-lts-raring which then gave below; E: Unable to locate package libgles-mesa-dev-lts-raring (sorry for being so specific and perhaps obvious, but I'm in the early stage of learning my way around linux). This user was running Ubuntu 12.04, and most other questions related to this I've seen came from people with a different release from mine, which has led me to believe that that is the reason why the suggestions to those didn't solve my problem. I'm using Ubuntu 13.10

    Read the article

  • Swap drive not operating correctly

    - by Blue Ice
    At first, I started seeing the warning signs. The halting pages. The molasses speed of the windows closing. The pictures not rendering. Then, I took action. Recently I added a swap drive to my computer. For a while, everything was good. Unicorns frolicked among the new bits and bytes resplendent on the shiny metal platter known as my swap drive. Today, I opened Chromium, and got on the 7th tab (start.csail.mit.edu) "He's dead, Jim!". This used to happen before I added my swap drive, but now I thought that it wouldn't happen because I added more memory. I fear for the safety of the unicorns. Please help me make my swap drive work again. As a side note, here is the result of cat /proc/swaps: Filename Type Size Used Priority /dev/sda5 partition 39075836 213896 -1 Result of free: total used free shared buffers cached Mem: 507472 330792 176680 0 6208 71252 -/+ buffers/cache: 253332 254140 Result of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sdb1 147G 8.9G 130G 7% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 240M 12K 240M 1% /dev tmpfs 50M 824K 49M 2% /run none 5.0M 0 5.0M 0% /run/lock none 248M 208K 248M 1% /run/shm none 100M 20K 100M 1% /run/user

    Read the article

  • Why can't I mount this partition?

    - by Mahmoud20070
    I have two hard disks (80 Giga ide and 500 Giga sata) and i installed Ubuntu 11.10 in hard disk 80 giga and give for him 20 gigabyte after that he saw all partition in two hard drivers until one I see it's health in gparted magic and he can see it but can't check it and this photo the problem is on partition sdb5 and I use this command to mount it from terminal and took me this although that this partition working very well in windows and Ubuntu could mount it before please give me any solution unless format or anything well delete my data because it's very important Before when I checked /dev/sdb5, it had errors - now all program didn't appear any errors unless fdisk -l All of my hard disks can be mounted except Partition D or /dev/sdb5. What can I do? I have tried to mount the partition with many different programs like Gparted, KDE Partition Manager, ntfs-3g from the terminal, and the mount command. All of them said something to the effect of: fuse: mount failed: Device or resource busy ...or... one or more block devices are holding /dev/sdb5 I installed Ubuntu 11.10 again today to see if anything had changed. The partition works fine under Windows.

    Read the article

  • Nexus 7 Possibly Bricked

    - by user214186
    I have a 1st gen Nexus 7 (32GB). I used the steps at https://wiki.ubuntu.com/Nexus7/Installation to successfully install Ubuntu 13.04 desktop onto the tablet. It was working fine and then I decided to upgrade to Ubuntu Touch. I booted the tablet into fast boot mode but the commands 'adb devices' and 'sudo fastboot devices' would not see the device. I am performing these steps from an Ubuntu 12.04 desktop PC. Prior to installing 13.04 the device was seen fine. I made the mistake of performing the 'Device factory reset' step from https://wiki.ubuntu.com/Touch/Install - Step 2. Now when I try to boot the device I get the following: mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /dev on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Targe filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.20.2 (Ubuntu 1:1.20.0-0ubuntu1) built-in shell (ash) Enter help for a list of built-in commands. (initramfs) I have searched the web but every reference to this problem is from people who still have ADB access to the device so they can recover by flashing the tablet again. I can attach a keyboard to the USB port and access the BusyBox console but I don't know what steps to do to recover from my error. Any suggestions would be helpful. Thanks

    Read the article

  • lirc_zilog IR transmission no longer working with HD-PVR on 12.04

    - by johnf
    I have been running a ubuntu 10.04 with a patched version of lirc_zilog for two years. I upgraded to 12.04 and lirc_zilog is no longer working with my HD-PVR. The MythTV wiki reports that it did work out of the box with 11.04. The error message I get on irsend is as follows: johnf@carbon:~$ /usr/local/bin/irsend SEND_ONCE blaster 0_130_KEY_POWER irsend: command failed: SEND_ONCE blaster 0_130_KEY_POWER irsend: hardware does not support sending The lircd daemon, run interactively, reports the following: lircd: accepted new client on /var/run/lirc/lircd lircd: could not get hardware features lircd: this device driver does not support the LIRC ioctl interface lircd: major number of /dev/lirc0 is 250 lircd: LIRC major number is 61 lircd: check if /dev/lirc0 is a LIRC device lircd: WARNING: Failed to initialize hardware lircd: error processing command: SEND_ONCE blaster 0_130_KEY_POWER lircd: hardware does not support sending lircd: removed client Checking dmesg seems to indicate that the kernel module is loading properly: [56497.730743] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [56497.730999] lirc_zilog: Zilog/Hauppauge IR driver initializing [56497.732484] lirc_zilog: ir_probe: ir_rx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x71 [56497.732493] lirc_zilog: ir_probe: ir_tx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x70 [56497.732496] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-0) [56497.756822] lirc_zilog: firmware of size 302355 loaded [56497.756945] lirc_zilog: 743 IR blaster codesets loaded [56497.757030] i2c i2c-0: lirc_dev: driver lirc_zilog registered at minor = 0 [56497.757033] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-0) registered as lirc0 and ready [56497.757035] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-0) done [56497.757056] lirc_zilog: initialization complete Here is my /etc/lirc/hardware.conf #Chosen IR Transmitter TRANSMITTER="HD-PVR" TRANSMITTER_MODULES="lirc_dev lirc_zilog" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" My lircd.conf is a copy of the recommended one. Examination of the kernel source seems to indicate that the lirc_zilog module should support transmission, it's newer than the patched version I was manually compiling on 10.04. I was previously using a manually built version of lirc 0.8.7 and not the packaged one. I'm now running the packaged version 9.0. I can provide any additional information required and will perform tests quickly. I'm very eager to get this issue resolved.

    Read the article

  • Automatic TRIM vs. manual TRIM

    - by Eike Cochu
    I am currently trying to find out how to trim with my new TP and was wondering about the difference of manual/online trimming. Here is my setup: ThinkPad T430s with SSD Samsung 830, 128GB and Xubuntu 12.10, here are some outputs to check if trim will work on my system (got these from here: http://wiki.ubuntuusers.de/SSD/TRIM) root@eike-tp:~# sudo hdparm -I /dev/sda | grep -i TRIM * Data Set Management TRIM supported (limit 8 blocks) First, I tried the online trimming: How to enable TRIM? my fstab with discard inserted: UUID=d6c49c17-a4f1-466c-9f7e-896c20db3bba / ext4 discard,noatime,errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=a0322f5f-c6c1-4896-863f-668f0638d8cf none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 I tried to test if it works (but I don't get any zeroes when I try it with /dev/sda), but found out that this method is only possible with SSD type 2 and I seem to have type 3. So I don't know if it works or not. The Ubuntuwiki (first link) recommends manual trimming, so I set up a daily cronjob instead of discard: #!/bin/sh LOG=/var/log/batched_discard.log echo "*** $(date -R) ***" >> $LOG fstrim -v / >> $LOG the wiki article suggests weekly or daily. Now to my questions: How often executes the automated trim? How often is recommended? Online vs. manual trimming? Thank you for your help

    Read the article

  • Trouble installing Ubuntu 12.04 from USB

    - by Kyle J
    I want to dual-boot Ubuntu Desktop 12.04 on my new ultrabook which has an Intel i7 3517U processor 6GB RAM Windows 7, 64-bit no CD/DVD drive I created my bootable USB stick using pendrivelinux.com with the "ubuntu-12.04.1-desktop-i386.iso". I am following these directions because they include nice screenshots; however, I do not get very far in the process. I am able to boot into the Live Desktop, and then I try to install onto my hard disk. Here are the series of actions that I take next: First, I see this ( http://i.imgur.com/vucYH ) window, and click 'continue' Then I get this ( http://imgur.com/2wESc ) window, and click 'continue' again This appears: and I get worried because it seems like there is no recognition that I have Windows installed. According to the directions I am following, I should see /dev/sda1 and /dev/sda2 partitions. In the drop-down menu at the bottom the only "Device for boot loader installation" is /dev/sdb and no information is shown. I am hesitant to click 'Install Now' for fear of what it might do to Windows. 4. I click 'Quit' and cancel the installation, but then about 5 seconds later this ( http://imgur.com/a/yXi0C ) window pops up (I have expanded it to full screen to scroll and show all the details). 5. Another second later this ( http://imgur.com/vxcrN ) comes up. I'm not sure how relevant this is. Does anyone have any insight into this issue?? Why does it not show my current Windows partition? What would happen if I tried to continue with the installation process? Thanks! PS - sorry, it would only let me post 2 hyperlinks as a new user

    Read the article

  • Quantifying the value of refactoring in commercial terms

    - by Myles McDonnell
    Here is the classic scenario; Dev team build a prototype. Business mgmt like it and put it into production. Dev team now have to continue to deliver new features whilst at the same time pay the technical debt accrued when the code base was a prototype. My question is this (forgive me, it's rather open ended); how can the value of the refactoring work be quantified in commercial terms? As developers we can clearly understand and communicate the value in technical terms, such a the removal of code duplication, the simplification of an object model and so on. But this means little to an executive focussed on the commercial elements. What will mean something to this executive is the dev. team being able to deliver requirements at faster velocity. Just making this statement without any metrics that clearly quantify return on investment (increased velocity in return for resource allocated to refactoring) carries little weight. I'm interested to hear from anyone who has had experience, positive or negative, in relation to the above. ----------------- EDIT ---------------- Thanks for the responses so far, all of which I think are good. What I want to develop is a metric that proves (or disproves!) all of these statements. A report that ties velocity to refactoring and shows a positive effect.

    Read the article

  • Why is my root filesystem always scanned at boot?

    - by luri
    I always have a pause at boot saying my filesystems are being checked (with a "press C to cancel" note, too). Actually (seeing boot.log) I think it's the / fs, which is located at /dev/sdb5 Several questions altoghether, here (hope this does not break any rule): Is this normal? Can I (or even should I) prevent this anyhow? According to boot.log (below) the fs does not seem to be 'clean', or, at least, it's in an state or condition that makes fsck always can it for errors for a while (just a few seconds). How can I fix it? Edit: This is my boot.log: fsck desde util-linux-ng 2.17.2 udevd[515]: can not read '/etc/udev/rules.d/z80_user.rules' /dev/sdb5: 249045/32841728 ficheros (0.3% no contiguos), 20488485/131338752 bloques init: ureadahead-other main process (1111) terminated with status 4 init: ureadahead-other main process (1116) terminated with status 4 Password: * Starting AppArmor profiles [160G Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox [154G[ OK ] * Setting sensors limits [160G [154G[ OK ] And this is dumpe2fs results for the filesystem being checked (well, the relevant part of the log): Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32841728 Block count: 131338752 Reserved block count: 6566937 Free blocks: 110850356 Free inodes: 32592701 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Dec 10 19:44:15 2010 Last mount time: Mon Feb 14 17:00:02 2011 Last write time: Mon Feb 14 16:59:45 2011 Mount count: 1 Maximum mount count: 33 Last checked: Mon Feb 14 16:59:45 2011 Check interval: 15552000 (6 months) Next check after: Sat Aug 13 17:59:45 2011 Lifetime writes: 331 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28049496 Default directory hash: half_md4 Directory Hash Seed: d3d24459-514b-4413-b840-e970b766095b Journal backup: inode blocks Journal features: journal_incompat_revoke Tamaño de fichero de transacciones: 128M Journal length: 32768 Journal sequence: 0x0005e0c4 Journal start: 1 This is the relevant (at least I think this is the fs being checked) line in fstab: #Entry for /dev/sdb5 : UUID=42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 / ext4 errors=remount-ro 0 1

    Read the article

  • MySQL Connector/Net 6.8.1 beta has been released

    - by Roberto Garcia
    Dear MySQL users, MySQL Connector/Net 6.8.1, a new version of the all-managed .NET driver for MySQL has been released. This is a beta release for 6.8.x and it's not recommended for production environments. It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.8.1 version of MySQL Connector/Net has support for Entity Framework 6.0 and includes: - Changed EF migration history table to use a single column as primary key.- Removed installer validation when MySql for Visual Studio is installed.- Added idempotent script for Entity Framework 6 migrations.- Fix for WI #824, Connector/NET writes wrong version for binding redirects.- Fix for WI #825, Connector/NET 6.8.1 writes wrong namespace for binding redirects. The release is available to download at http://dev.mysql.com/downloads/connector/net/#downloads Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.6/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows You can also post questions on our forums at http://forums.mysql.com/ Enjoy and thanks for the support! Connector/NET Team

    Read the article

  • How do I get OBDII software working?

    - by NoBugs
    I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

    Read the article

  • Ubuntu hangs after replugging the modem

    - by Iftekhar Ahmed Shafi
    I am facing this issue on Ubuntu 12.04, which is for my Wimax modem with beceem chipset. If I replug the device Ubuntu goes in hang state. Its happens very often. If I plug the USB and restart it works most of the time. But it is very annoying to restart every time it hangs. The modem works smoothly in Windows 7. And it used to work OK in Ubuntu 11.10. Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Successfully activated service 'org.freedesktop.UDisks' Jun 13 19:26:00 iftekhar-HP-520-Notebook-PC goa[2168]: goa-daemon version 3.4.0 starting [main.c:112, main()] Jun 13 19:26:47 iftekhar-HP-520-Notebook-PC udevd[432]: timeout 'cdrom_id --lock-media /dev/sr1' Jun 13 19:26:48 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC kernel: [ 85.820162] sr 2:0:0:0: Device offlined - not ready after error recovery Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:27:20 udevd[432]: last message repeated 31 times Jun 13 19:27:25 udevd[432]: last message repeated 4 times What can I do to avoid this hangs and restarts?

    Read the article

  • My laptop with Linux/ Ubuntu isn't working

    - by Andy Campos
    I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

    Read the article

  • MPlayer does not work

    - by Soham Pal
    Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

    Read the article

  • Unable to start VMWare Workstation after upgrade to 13.04

    - by pst007x
    After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

    Read the article

  • compile error in Ubuntu 10

    - by yozloy
    Hey guys I got a vps which run solusVM. I'm now trying to install ruby 1.9.2 in it. I follow this guide: after I run this command apt-get update apt-get -y install build-essential zlib1g zlib1g-dev libxml2 libxml2-dev libxslt-dev I got this error below root@makserver:/usr/local/src/ruby-1.9.2-p0# apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies... Done The following extra packages will be installed: libc6 Suggested packages: glibc-doc The following packages will be upgraded: libc6 1 upgraded, 0 newly installed, 0 to remove and 80 not upgraded. Need to get 0B/4252kB of archives. After this operation, 4096B disk space will be freed. Do you want to continue [Y/n]? y debconf: apt-extracttemplates failed: Bad file descriptor (Reading database ... 21594 files and directories currently installed.) Preparing to replace libc6 2.11.1-0ubuntu7.2 (using .../libc6_2.11.1-0ubuntu7.8_amd64.deb) ... open2: fork failed: Cannot allocate memory at /usr/share/perl5/Debconf/ConfModule.pm line 59 dpkg: error processing /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 12 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Anybody can tell me how can I correct this. Thanks

    Read the article

  • Is it correct to fix bugs without adding new features when releasing software for system testing?

    - by Pratik
    This question is to experienced testers or test leads. This is a scenario from a software project: Say the dev team have completed the first iteration of 10 features and released it to system testing. The test team has created test cases for these 10 features and estimated 5 days for testing. The dev team of course cannot sit idle for 5 days and they start creating 10 new features for next iteration. During this time the test team found defects and raised some bugs. The bugs are prioritised and some of them have to be fixed before next iteration. The catch is that they would not accept the new release with any new features or changes to existing features until all those bugs fixed. The test team says that's how can we guarantee a stable release for testing if we also introduce new features along with the bug fix. They also cannot do regression tests of all their test cases each iteration. Apparently this is proper testing process according to ISQTB. This means the dev team has to create a branch of code solely for bug fixing and another branch where they continue development. There is more merging overhead specially with refactoring and architectural changes. Can you agree if this is a common testing principle. Is the test team's concern valid. Have you encountered this in practice in your project.

    Read the article

  • Please help me decide if I should I change jobs [closed]

    - by KindaNewbie
    About me: I am very entrepreneurial and believe I would do well working solo as a consultant and possibly hiring help. I do want to do that at some point. I love to learn and a good challenge. Please help me make this decision! Current job (I am there for about 4 years): Pros: secure job good pay (I guess I am 80 percentile for my level/geographical area) large corporation - main business is not software excellent health insurance for low cost to me, pension, 401k matching, 6 weeks paid time off per year small dev team use of latest technologies (mostly WPF/silverlight) low supervision (I can do personal things all the time) I get to do a lot of moonlighting and my goal was to go solo full-time in a year or so. Cons: small team of non-professional devs 50% of my time I do things I don't enjoy projects are not meaningful to the organization If I left it wouldn't be too hard for them - business would resume as usual. Nobody besides my small team of 3 has any idea about software development whatsoever. Prospect job: Pros: small/agile software company same salary as current job same size dev team but all are very sharp (I would probably be the weakest of the team in the beginning) technology used is outside my comfort zone (latest cool web technolgies such as html5/jquery/...) - I am not a web dev and they know that. ton of learning opportunity Start-up - possibility of stock option/partial ownership of some sort Cons: Small office space - not able to do personal things as often (may be pro) No room for moonlighting less benefits (but salary can compensate for that)

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >