Search Results

Search found 5951 results on 239 pages for 'monitor calibration'.

Page 93/239 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Unable to start VMWare Workstation after upgrade to 13.04

  - by pst007x

  After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• Impossible to select folders and files with mouse (Ubuntu 12.04)

  - by François

  First-time post for me here (after being a regular reader for two years though) so thank you all for the quality of replies and help provided. My problem is very simple apparently but a tricky one. I just installed the Ubuntu 12.04(1) along with the Gnome3-shell environment on my new pc desktop Acer Aspire X3995 (see config below). Everything work (more or less) so far (I still have problems of sound and disabled 2-fingers gestures with my screen -- which I will have to deal with xconfig settings I think -- though), but the main problem is that I cannot select files/folders with my USB mouse. When I try to double click on them, nothing happen (sometimes one folder or file is selected but then unselected again). Note that the navigation works perfectly from the USB keyboard and from the touch-screen (I am using a 23" wide touch-screen Acer Monitor T231Hbmid). Also, the mouse works perfectly with other menu navigation, with the only difference that the text of certain menus is selected as if I was holding the left click on them. So I assume the problem is only related to the mouse. Needless to say that the usual basic hardware checks have been performed (unplugging, powered-off, etc.). My level is simply "advanced user", meaning that if you provide me with intelligible input I should find my way, but please don't expect too much technical/specific knowledge... :) Please let me know if you need more information on this bug. Now, fingers crossed... and thanks in advance! Ciao, François Config of Acer Aspire X3995: Ubuntu 12.04 / Gnome3-shell environment / Intel Core i5 3450 / nVidia GeForce 605, 1Gb. Screen: Acer Monitor TFT 23" wide T231Hbmid

  Read the article

• Using Computer Management (MMC) with the Solaris CIFS Service (August 25, 2009)

  - by user12612012

  One of our goals for the Solaris CIFS Service is to provide seamless Windows interoperability: not just to deliver ubiquitous, multi-protocol file sharing, which is obviously a major part of this project, but to support Windows services at a fundamental level.  It's an ongoing mission and our latest update includes support for Windows remote management. Remote management is extremely important to Windows administrators and one of the mainstay tools is Computer Management. Computer Management is a Windows administration application, actually a collection of Microsoft Management Console (MMC) tools, that can be used to configure, monitor and manage local and remote services and resources.  The MMC is an extensible framework of registered components, known as snap-ins, which allows Computer Management to provide comprehensive management features for both the local system and remote systems on the network. Supported Computer Management features include: Share ManagementSupport for share management is relatively complete.  You can create, delete, list and configure shares.  It's not yet possible to change the maximum allowed or number of users properties but other properties, including the Share Permissions, can be managed via the MMC. Users, Groups and ConnectionsYou can view local SMB users and groups, monitor user connections and see the list of open files. If necessary, you can also disconnect users and/or close files. ServicesYou can view the SMF services running on an OpenSolaris system.  This is a read-only view - we don't support service management (the ability to start or stop) SMF services from Computer Management (yet). To ensure that only the appropriate users have access to administrative operations there are some access restrictions on these remote management features. Regular users can: List shares Only members of the Administrators or Power Users groups can: Manage shares List connections Only members of the Administrators group can: List open files and close files Disconnect users View SMF services View the EventLog Here's a screenshot when I was using Computer Management and Server Manager (another Windows remote management application) on Windows XP to view some open files on an OpenSolaris system to prepare a slide presentation on MMC support.

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• How do I find out which process is eating up my bandwidth?

  - by Bruce Connor

  I think I'm being the victim of a bug here. Sometimes while I'm working (I still don't know why), my network traffic goes up to 200 KB/s and stays that way, even tough I'm not doing anything internet-related. This sometimes happens to me with the CPU usage. When it does, I just run a top command to find out which process is responsible and then kill it. Problem is: I have no way of knowing which process is responsible for my high network usage. Both the resource monitor and the top command only tell me my total network usage, neither of them tells me process specific network info. Is there another command I can use to find out which process is getting out of hand? I've already tried killing all the obvious ones (firefox, update-manager, pidgin, etc) with no luck. So far, restarting the machine is the only way I found of getting rid of the issue. EDIT: (just to be clear) I've found questions here about monitoring total bandwidth usage, but, as I mentioned, that's not what I need. UPDATE: The command iftop gives results that disagree entirely with the information reported by System Monitor. While the latter claims there's high network traffic, the former claims there's barely 1 KB/s. Thanks

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• Game: Age of Empires sound good but video "out of range"

  - by Ezekiel

  I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

  Read the article

• Monitoring Baseline

  - by Grant Fritchey

  Knowing what's happening on your servers is important, that's monitoring. Knowing what happened on your server is establishing a baseline. You need to do both. I really enjoyed this blog post by Ted Krueger (blog|twitter). It's not enough to know what happened in the last hour or yesterday, you need to compare today to last week, especially if you released software this weekend. You need to compare today to 30 days ago in order to begin to establish future projections. How your data has changed over 30 days is a great indicator how it's going to change for the next 30. No, it's not perfect, but predicting the future is not exactly a science, just ask your local weatherman. Red Gate's SQL Monitor can show you the last week, the last 30 days, the last year, or all data you've collected (if you choose to keep a year's worth of data or more, please have PLENTY of storage standing by). You have a lot of choice and control here over how much data you store. Here's the configuration window showing how you can set this up: This is for version 2.3 of SQL Monitor, so if you're running an older version, you might want to update. The key point is, a baseline simply represents a moment in time in your server. The ability to compare now to then is what you're looking for in order to really have a useful baseline as Ted lays out so well in his post.

  Read the article

• How to prevent window list "confusion" when detaching eclipse views?

  - by amotzg

  I'm detaching eclipse views to float on my other screen in order to get more coding space on the first screen. When doing that, the detached windows appear in ubuntu's window list applet with the eclipse icon but with no title. Then, when pushing the main eclipse button on the window list, one of the detached views will get to front but not the main eclipse window. When using Alt+tab I can also see the extra eclipse icons but choosing the correct one for the main window works and make it the active window while also showing all detached childs. Other applications behave as expected, e.g. gimp floating panels don't show on the windows list and this is also the case with SlickEdit, Firefox child windows all show on window list but gets the focus correctly, etc. I can see the the workspace switcher show my two screens but in 'Monitor preferences' I see my two screens as one big screen. I'm working with ubuntu 10.04.4 under a VMware Workstation 7.1.3 build-324285. 'uname -a' output: Linux ubuntu 2.6.32-40-generic #87-Ubuntu SMP Tue Mar 6 00:56:56 UTC 2012 x86_64 GNU/Linux The desktop screen shot with the problem, ununtu's version, and Monitor preferences. How can I solve it and make only the main window show in window list or at least get activated when pushing it's button on the window list?

  Read the article

• Bizarre SSH Problem - It won't even start

  - by thallium85

  I recently got Ubuntu 12.04 Precise, got it up and running with some MediaWiki software, static IP on the box and router and was able to access the main page even from a cell phone. Everything seemed great... Then I wanted to finally get rid of the monitor and keyboard and login remotely via SSH. I installed openssh-server, let everything point to port 22 for a test run and installed putty on my Windows XP machine. I got a connection refused. Went back and started checking the Ubuntu install itself... (I'm under root from this point on) $ sudo -s $ service ssh status ssh stop/waiting $ service ssh start ssh start/running, process 2212 $ service ssh status ssh stop/waiting Apparently ssh has stopped or is waiting for something.... $ ssh localhost ssh: connect to host localhost port 22: Connection refused I can't even connect to myself... I checked ufw (firewall) to see if port 22 is doing alright... $ sudo ufw status Status: active To Action From 22 ALLOW Anywhere 22/tcp ALLOW Anywhere 22 ALLOW Anywhere (v6) 22/tcp ALLOW Anywhere (v6) sshd_config shows only Port 22 Is ssh not using the right IP address at all? I just don't get what I did wrong here. When this is up and running I will def change the port number, but for now, I don't want to mess with the default install too much until a test run with putty is successful. Edit: Here are my sshd_config file and my ssh_config file. The command /usr/sbin/sshd -p 22 -D -d -e returns: /etc/ssh/sshd_config line 159: Subsystem 'sftp' already defined. Edit: @phoibus moving the sshd_config file and reinstalling did the trick! service ssh status the above command shows that ssh is now running and I am now able to log in from my windows xp computer remotely via putty. Thanks so much! I can now use my monitor for other things!

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

• Latest update to Ubuntu 13.10 broke Intel graphics drivers

  - by James Davies

  I'm running a copy of Ubuntu 13.10 on an i7-4771 w/ Intel HD4600 Graphics using a Dell Ultrasharp 1440p monitor via Displayport. Up until today this configuration has been working perfectly, however the latest update appears to have broken my graphics configuration, and xorg is now refusing to go above 1280p resolution. Running xrandr it appears the driver incorrectly thinks my monitor is plugged into the HDMI port and is detecting a max resolution of 1920x1200 instead of 2560x1440. (It's actually plugged in via Displayport). Based on the apt history.log, the latest update was for the kernel. I'm presuming the issue is that the official Intel driver hasn't been updated to support this version? Is there any way to resolve this, or will I need to upgrade to 14.10 to get the latest driver from Intel? Start-Date: 2014-05-28 11:30:57 Commandline: aptdaemon role='role-commit-packages' sender=':1.473' Install: linux-image-extra-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-image-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-headers-3.11.0-22:amd64 (3.11.0-22.38), linux-headers-3.11.0-22-generic:amd64 (3.11.0-22.38)

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• backlight doesn't work on acer 5732z tried everything I can find

  - by Dude Random21

  Ok if you can solve my problem you're really really good. I want to run ubuntu 12.04 on my acer aspire 5732z I know (from research) that these computer's have issues with the backlight on ubuntu. So I tried a couple of solutions: The "sudo lightdm restart" method. I get no change at all. The "sudo setpci -s 00:02.0 F4.B=30" method. This so far has been the most effective, I first tried it in the F1 console right away I get the screen back, problem is going back to the desktop it goes back to being black. So I tried it from a terminal window and it works as well but as soon as I unplug my external monitor the screen turns black again and doesn't come back. If I plug the monitor back in the screen stays black and the only thing I see is the mouse pointer. From here I go back into console (which I am able to see) and reboot from there. The "sudo sed -i 's/GRUB_CMDLINE_LINUX=""/GRUB_CMDLINE_LINUX="acpi_osi=Linux"/g' /etc/default/grub" method. This one I got no instant change and after reboot still no change. I'm open to pretty much any suggestions you may have.

  Read the article

• How to force Multiple Monitors correct resolutions for LightDM?

  - by Hanynowsky

  I am affected by the BUG: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/874241 Otherwise, if like me you have a laptop connected to a second monitor of higher resolution, LIGHTDM at the login stage, mirrors the displays in both screens and assign to them a common resolution (1024X768) in my case, instead of extending the desktop (Primary screen with the greeter and secondary with just a logo as mentioned in the Multiple Monitors UX specifications book for 12.04). Here is my xrandr -q @L502X:~$ xrandr -q Screen 0: minimum 320 x 200, current 1920 x 1848, maximum 8192 x 8192 LVDS1 connected 1366x768+309+1080 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm 1920x1080 60.0*+ 1600x1200 60.0 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1280x800 59.8 1024x768 60.0 800x600 60.3 56.2 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) I tried to force lightdm to execute some xrandr commands in order to set the right resolution for each monitor and extend the desktop, but I get a LOW GRAPHICS MODE ERROR (You're running in low graphics mode, your screen, input devices...did not get detected..) I created a simple script named lightdmxrand.sh: #!/bin/sh xrandr --output HDMI1 --primary --mode 1920x1080 --output LVDS1 --mode 1366x768 --below HDMI1 And told lightdm to run it : /etc/lightdm/lightdm.conf [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-setup-script=/usr/bin/numlockx on display-setup-script=/home/hanynowsky/lightdmxrandr.sh Someone knows what is wrong!? Thanks in advance.

  Read the article

• Install lubuntu on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• slow virtualbox guest

  - by ecoologic

  I run a guest ubuntu 12.04 on a host ubuntu 12.04, with virtual box, and the guest is much, much slower than the host (ALT+TAB costs 4-5secs). I had a look around and I found contradicting opinions on virtualbox vs vmware (free), so I taught to keep the former. Both systems are updated, I installed the additions on the guest and I evenly split memory and video memory (64mb) between guest and host. I am running a toshiba m200 laptop with 4GB ram and shared video memory. The host bios does not include a configuration option for machine virtualization. I have 2 cpus and I can't give them both to the vm. Is there anything I overlooked that could solve my problem? Feel free to ask for more info, and thank you for any help. EDIT Idling with the monitor open the (single) guest cpu never gets below 55% and could raise to 80 - 90% just moving the mouse around, opening ff will cause the monitor to run 100% in the guest, while the host shows that both cpus are evenly working around 60%. My cpu is Intel® Core™2 Duo CPU T5450 @ 1.66GHz × 2. If this is not a configuration problem, does it mean my machine is too weak for virtualization?

  Read the article

• Unity in 12.10 comes up behind other windows

  - by ams

  I've just upgraded from 12.04 to 12.10. For the most part, everything works fine, but I have a few small problems with Unity, or maybe Compiz. When I hit the Super key, or click on the dash launcher, the dash sometimes comes up behind the other windows on the screen. As you can imagine, this makes it somewhat tricky to use. Once it has started coming up behind, no amount of trying again will convince it to come back to the front. Possibly related, the Alt-Tab switcher doesn't show either. It maybe that there isn't one, or maybe that's behind also? Alt-Tab does switch the windows, but there's no visual indicator. When I hit Super-W, the windows do all do the zoom thing, but it's slow and juddery where it used to be smooth in 12.04. I'm using the standard "radeon" driver, same as before, with a triple-head monitor setup (and that works fine). I've not tried the proprietary drivers as I've previously found the multi-monitor support much weaker than the default driver, but maybe that's the way to go now? Video play fine. Even WebGL seems ok. Do other see this problem? Is it a bug? Or have I just got some left-over config from 12.04 in the way?

  Read the article

• How do I remove the tool tips on the launch bar?

  - by Sephethus

  The title is the question. These tool tips stay until I try to click past them. They're annoying since they constantly pop up and block the view of what I'm trying to do. Unfortunately I need the launch bar because Ubuntu is running on VMware and the console does not allow me to use the keyboard for switching tasks (to my knowledge). How do I disable them? I'd post an image as an example, but this site will not let me. UPDATE: unity 5.16.0 UPDATE 2: I discovered that this may only be a problem with users who run Ubuntu on a full screen VMware console that is situated on the right monitor. When the mouse is moved to the left monitor the tooltips popup and remain until the mouse is clicked twice in the VMware console window to make it active. Unfortunately my problem is one involving a rare situation I think. However, I'd love to be able to disable these tool tips if possible. It would also be nice if new features were added that can allow further customization of the launch bar.

  Read the article

• Ubuntu 14.04 stalling. Problem with LightDM. Plymouth (and logging out) switches over to a black screen w/ white cursor

  - by Kage

  if its a duplicate, sorry. Couldn't find anything that fits my issue, much less that was on 14.04. I changed a few things recently. Switched to the Numix theme (from PPA), installed lm-sensors and psensor (ran all the I/O probes), Ubuntu Tweak, Pinta, and well, Team Fortress 2 on Steam. :P The system will get to the Plymouth 'ubuntu' screen, load load, all dots filled, switches over to LightDM, but wait! No LightDM. :I Just a blank screen with that white cursor. Can't switch out to tty1-6 - not sure if the Ctrl-Alt-F1 is disabled in 14.04 or if its literally just locked down. If I change any files, I have access to the filesystem from my Windows 8 partition. That's it. :/ I'm pretty familiar with Linux, especially Ubuntu, but I think I'm still at the point I know just enough to break things and not always how to fix 'em. Any help would be greatly appreciated. Thanks! UPDATE I was just able to get into my desktop briefly. I booted Ubuntu. When the black screen froze, I hit Ctrl-Alt-Del. When it started switching off, I hit Ctrl-Alt-Backspace. It rebooted. I plugged the second monitor in I had been using before the issue ever came about. Plymouth displayed on both. LightDM came up, displayed on both (it used to show only the ubuntu logo on the unfocused monitor though). I logged in just fine. Even ran some pending software updates. I logged out of the desktop though, and LightDM refused to show again. xP

  Read the article

• Over-scan Issues when using HDTV through VGA

  - by RPG Master

  Right now all we can do is set the TV to 1280x768 instead of its native resolution of 1360x768. Setting it to its native resolution gives you a screen with a large portion of the left side of the screen cut off. We've tried everything with the TV so now we're turning to the innards of Ubuntu in hopes of fixing this. The computer is using an NVIDIA GeForce GT240. This is its current xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin # HorizSync 28.0 - 55.0 # VertRefresh 43.0 - 72.0 Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 6600" EndSection Section "Screen" # Removed Option "metamodes" "1360x768 +0+0; 800x600 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1360x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How do I get HDMI output working on a Dell XPS 15 L502x?

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >