Search Results

Search found 28864 results on 1155 pages for 'ob start'.

Page 93/1155 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Java Matcher groups: Understanding The difference between "(?:X|Y)" and "(?:X)|(?:Y)"

    - by user358795
    Can anyone explain: Why the two patterns used below give different results? (answered below) Why the 2nd example gives a group count of 1 but says the start and end of group 1 is -1? public void testGroups() throws Exception { String TEST_STRING = "After Yes is group 1 End"; { Pattern p; Matcher m; String pattern="(?:Yes|No)(.*)End"; p=Pattern.compile(pattern); m=p.matcher(TEST_STRING); boolean f=m.find(); int count=m.groupCount(); int start=m.start(1); int end=m.end(1); System.out.println("Pattern=" + pattern + "\t Found=" + f + " Group count=" + count + " Start of group 1=" + start + " End of group 1=" + end ); } { Pattern p; Matcher m; String pattern="(?:Yes)|(?:No)(.*)End"; p=Pattern.compile(pattern); m=p.matcher(TEST_STRING); boolean f=m.find(); int count=m.groupCount(); int start=m.start(1); int end=m.end(1); System.out.println("Pattern=" + pattern + "\t Found=" + f + " Group count=" + count + " Start of group 1=" + start + " End of group 1=" + end ); } } Which gives the following output: Pattern=(?:Yes|No)(.*)End Found=true Group count=1 Start of group 1=9 End of group 1=21 Pattern=(?:Yes)|(?:No)(.*)End Found=true Group count=1 Start of group 1=-1 End of group 1=-1

    Read the article

  • How to calculate the normal of points on a 3D cubic Bézier curve given normals for its start and end points?

    - by Robert
    I'm trying to render a "3D ribbon" using a single 3D cubic Bézier curve to describe it (the width of the ribbon is some constant). The first and last control points have a normal vector associated with them (which are always perpendicular to the tangents at those points, and describe the surface normal of the ribbon at those points), and I'm trying to smoothly interpolate the normal vector over the course of the curve. For example, given a curve which forms the letter 'C', with the first and last control points both having surface normals pointing upwards, the ribbon should start flat, parallel to the ground, slowly turn, and then end flat again, facing the same way as the first control point. To do this "smoothly", it would have to face outwards half-way through the curve. At the moment (for this case), I've only been able to get all the surfaces facing upwards (and not outwards in the middle), which creates an ugly transition in the middle. It's quite hard to explain, I've attached some images below of this example with what it currently looks like (all surfaces facing upwards, sharp flip in the middle) and what it should look like (smooth transition, surfaces slowly rotate round). Silver faces represent the front, black faces the back. Incorrect, what it currently looks like: Correct, what it should look like: All I really need is to be able to calculate this "hybrid normal vector" for any point on the 3D cubic bézier curve, and I can generate the polygons no problem, but I can't work out how to get them to smoothly rotate round as depicted. Completely stuck as to how to proceed!

    Read the article

  • How do I start a service which is defined in a different package?

    - by Brad Hein
    I have two apps, one runs in namespace com.gtosoft.voyager and the other is com.gtosoft.dash. From com.gtosoft.dash I would like to start up the service which is defined in com.gtosoft.voyager... I think I need an intent, but what arg(s) would I pass to the intent before kicking it off with startService()? If they were in the same package I could just use Intent svc=new Intent (SettingsActivity.this,VoyagerService.class); startService(svc); Snippet of Manifest which defines the service <application android:icon="@drawable/voyagercarlogo" android:label="@string/app_name" android:debuggable="false"> <provider android:name="com.gtosoft.voyager.VoyagerCProvider" android:authorities="com.gtosoft.voyager"/> <service android:name=".VoyagerService"/> <activity android:name=".SettingsActivity" android:label="Voyager" android:configChanges="keyboardHidden|orientation"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity>

    Read the article

  • Why can't I start the Windows Update control panel with WinExec?

    - by Bill
    In Executing Control Panel Items, MSDN says this: Windows Vista Canonical Names In Windows Vista and later, the preferred method of launching a Control Panel item from a command line is to use the Control Panel item's canonical name. According to the Microsoft website this should work: The following example shows how an application can start the Control Panel item Windows Update with WinExec. WinExec("%systemroot%\system32\control.exe /name Microsoft.WindowsUpdate", SW_NORMAL); For Delphi 2010 I tried: var CaptionString: string; Applet: string; Result: integer; ParamString: string; CaptionString := ListviewApplets1.Items.Item[ ListviewApplets1.ItemIndex ].Caption; if CaptionString = 'Folder Options' then { 6DFD7C5C-2451-11d3-A299-00C04F8EF6AF } Applet := 'Microsoft.FolderOptions' else if CaptionString = 'Fonts' then {93412589-74D4-4E4E-AD0E-E0CB621440FD} Applet := 'Microsoft.Fonts' else if CaptionString = 'Windows Update' then { 93412589-74D4-4E4E-AD0E-E0CB621440FD } Applet := 'Microsoft.WindowsUpdate' else if CaptionString = 'Game Controllers' then { 259EF4B1-E6C9-4176-B574-481532C9BCE8 } Applet := 'Microsoft.GameControllers' else if CaptionString = 'Get Programs' then { 15eae92e-f17a-4431-9f28-805e482dafd4 } Applet := 'Microsoft.GetPrograms' //... ParamString := ( SystemFolder + '\control.exe /name ' ) + Applet; WinExec( ParamString, SW_NORMAL); <= This does not execute and when I trapped the error it returned ERROR_FILE_NOT_FOUND. I tried a ExecAndWait( ParamString ) method and it works perfectly with the same ParamString used with WinExec: ParamString := ( SystemFolder + '\control.exe /name ' ) + Applet; ExecAndWait( ParamString ); <= This executes and Runs perfectly The ExecAndWait method I used calls Windows.CreateProcess: if Windows.CreateProcess( nil, PChar( CommandLine ), nil, nil, False, 0, nil, nil, StartupInfo, ProcessInfo ) then begin try Does WinExec require a different ParamString, or am I doing this wrong with WinExec? I did not post the full ExecAndWait method but I can if someone wants to see it.

    Read the article

  • initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure)

    - by mazgalici
    2 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up mysql-server-5.0 (5.0.32-7etch12) ... Stopping MySQL database server: mysqld. Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Where is mpx386.6 and start.c in Minix 3.2?

    - by John Bowlinger
    I'm trying to follow along in Operating Systems and Implementation 3rd edition and I'm now at the part in the book where Tanenbaum is discussing bootup and kernel process switching. He keeps referring to these 2 files (mpx386.s, start.c) that are supposedly in a directory called kernel, but I can't seem to find them. In the root directory, when I go to boot/minix/3.2.0/kernel, kernel just seems to be a binary file that is illegible in terminal. There also seems to be a bunch of mod01-mod12 gz binary files as well in the 3.2.0 directory. Am I in the wrong directory, or is there something I need to install and do to read kernel? I would like to follow along with the book to what's on my screen, instead of constantly flipping back and forth. I realize alot of files are completely different from this book published in 2006 and I accept that, but this seems to be a critical juncture of the book and the operating system as a whole. If it's any consolation, I'm running the OS in Virtualbox on a 64-bit Macbook.

    Read the article

  • Start the Control Panel item Windows Update with WinExec.

    - by Bill
    Windows Vista Canonical Names The Microsoft website says "In Windows Vista and later, the preferred method of launching a Control Panel item from a command line is to use the Control Panel item's canonical name." According to the Microsoft website this should work: The following example shows how an application can start the Control Panel item Windows Update with WinExec. WinExec("%systemroot%\system32\control.exe /name Microsoft.WindowsUpdate", SW_NORMAL); For Delphi 2010 I tried: var CaptionString: string; Applet: string; Result: integer; ParamString: string; CaptionString := ListviewApplets1.Items.Item[ ListviewApplets1.ItemIndex ].Caption; if CaptionString = 'Folder Options' then { 6DFD7C5C-2451-11d3-A299-00C04F8EF6AF } Applet := 'Microsoft.FolderOptions' else if CaptionString = 'Fonts' then {93412589-74D4-4E4E-AD0E-E0CB621440FD} Applet := 'Microsoft.Fonts' else if CaptionString = 'Windows Update' then { 93412589-74D4-4E4E-AD0E-E0CB621440FD } Applet := 'Microsoft.WindowsUpdate' else if CaptionString = 'Game Controllers' then { 259EF4B1-E6C9-4176-B574-481532C9BCE8 } Applet := 'Microsoft.GameControllers' else if CaptionString = 'Get Programs' then { 15eae92e-f17a-4431-9f28-805e482dafd4 } Applet := 'Microsoft.GetPrograms' //... ParamString := ( SystemFolder + '\control.exe /name ' ) + Applet; WinExec( ParamString, SW_NORMAL); <= This does not execute and when I trapped the error it returned ERROR_FILE_NOT_FOUND. I tried a ExecAndWait( ParamString ) method and it works perfectly with the same ParamString used with WinExec: ParamString := ( SystemFolder + '\control.exe /name ' ) + Applet; ExecAndWait( ParamString ); <= This executes and Runs perfectly The ExecAndWait method I used creates a Windows.CreateProcess... if Windows.CreateProcess( nil, PChar( CommandLine ), nil, nil, False, 0, nil, nil, StartupInfo, ProcessInfo ) then begin try My Question Does WinExec require a different ParamString or am I doing this wrong with WinExec? I did not post the full ExecAndWait method but I can if someone wants to see it...

    Read the article

  • Very Urgent :How to start a new session if a user click on the new tab in IE or mozilla on websphere

    - by ha22109
    Hi, I have one "user search" portlet on the home page of one application running on websphere portal server.Which display the matching user records as per the search criteria filled in the search form.I have requirement to have a "back to search input" link on the results page which onclick should show the filled form on the input jsp. The issue which i am facing is if i open the application in two diff tab of same IE browser and start giving some search criteria and submit and same time search for some other input from other IE tab (in the same browser)and then go back to previous tab and click on "back to search input" link then instead of showing me the first input it will show me the imput which i entered in the next IE tab. I am setting and getting the bean(form bean) through portlet session.but in the two diff tab of same IE it will be the sae user session (and may be the same portlet session..) Please tell me solution for this. The one thing to be notice here is i can access this "user search" application even without doing login also.so it must be taking the default portlet session in this case. what wil happen once i login and then search,will it going to overwrite the portlet session and http session or howz is that?

    Read the article

  • I want to build a Google-friendly web app, where should I start?

    - by ronii
    I have only very basic experience with HTML/CSS and have quite a bit of experience with testing software and web apps from a consumer perspective. I'd love to launch a web application that plays nicely with Google services, similar to some of the apps you'd find on the Google Apps Marketplace, such as ManyMoon, time to note, Socialwok, etc. I'm a huge Google fan and would like to build something that's well integrated with other Google services. If you were a total beginner and wanted to build a complex app like one of examples above (project management, CRM, etc), where would you start? If you worked your ass off 18 hours a day, 24/7, how fast could you do it? I've dabbled into various languages and development frameworks, and read about which apps are using what languages but it's hard to figure out what would be most beneficial to jump into. Ruby on Rails, PHP, Google Web Toolkit, AppEngine. The list goes on and on. I want to be able to build and launch my own scalable web app. Thanks.

    Read the article

  • Why aren't my threads start at the same time? Java

    - by Ada
    Hi, I have variable number of threads which are used for parallel downloading. I used this, for(int i = 0; i< sth; i++){ thrList.add(new myThread (parameters)); thrList.get(i).start(); thrList.get(i).join(); } I don't know why but they wait for each other to complete. When using threads, I am supposed get mixed print outs, since right then there are several threads running that code. However, when I print them out, they are always in order and one thread waits for the previous one to finish first. I only want them to join the main thread, not wait for each other. I noticed that when I measured time while downloading in parallel. How can I fix this? Why are they doing it in order? In my .java, there is MyThread class with run and there is Downloader class with static methods and variables. Would they be the cause of this? The static methods and variables? How can I fix this problem?

    Read the article

  • Cursor loops; How to perform something at start/end of loop 1 time only?

    - by James.Elsey
    I've got the following in one of my Oracle procedures, I'm using it to generate XML -- v_client_addons is set to '' to avoid null error OPEN C_CLIENT_ADDONS; LOOP FETCH C_CLIENT_ADDONS INTO CLIENT_ADDONS; EXIT WHEN C_CLIENT_ADDONS%NOTFOUND; BEGIN v_client_addons := v_client_addons || CLIENT_ADDONS.XML_DATA; END; END LOOP; CLOSE C_CLIENT_ADDONS; -- Do something later with v_client_addons The loop should go through my cursor and pick out all of the XML values to display, such as : <add-on name="some addon"/> <add-on name="another addon"/> What I would like to achieve is to have an XML start/end tag inside this loop, so I would have the following output <addons> <add-on name="some addon"/> <add-on name="another addon"/> </addons> How can I do this without having the <addons> tag after every line? If there are no addons in the cursor (cursor is empty), then I would like to skip this part enitrely

    Read the article

  • Looking forward to a programming future but confused where to start.

    - by Kraivyne
    Hi there, I am very new to this site and to programming. I started doing some basic programming with python a few weeks ago and recently, messing around with Java basics. My main problem is that I am completely overwhelmed and haven't got the slightest clue where I should be starting. I want to learn programming because I really enjoy doing it, the simple applications that I have managed to conjure up put a smile on my face. My plan is to eventually (by eventually I'm talking about 6 years+) go into games programming. I have been informed that C++ is the best way to go about this but haven't got the slightest clue what book/sight is optimal for someone who is still learning the very basics. These are my questions: I have been to the Definitive C++ Book Guide but am still unsure which book is best to start of with. Should I stick with Python or Java instead of moving on to C++? Is there any advice you would give to a beginner programmer? Thanks again for all your help.

    Read the article

  • How to check dates don't overlap in a table using TSQL.

    - by Jon
    I have a table with start and finish datetimes that I need to determine if any overlap and not quite sure the best way to go. Initially I was thinking of using a nested cursor as shown below which does work, however I'm checking the same records against each other twice and I'm sure it is not very efficient. eg: this table would result in an overlap. id start end ------------------------------------------------------- 1 2009-10-22 10:19:00.000 2009-10-22 11:40:00.000 2 2009-10-22 10:31:00.000 2009-10-22 13:34:00.000 3 2009-10-22 16:31:00.000 2009-10-22 17:34:00.000 Declare @Start datetime, @End datetime, @OtherStart datetime, @OtherEnd datetime, @id int, @endCheck bit Set @endCheck = 0 DECLARE Cur1 CURSOR FOR select id, start, end from table1 OPEN Cur1 FETCH NEXT FROM Cur1 INTO @id, @Start, @End WHILE @@FETCH_STATUS = 0 AND @endCheck = 0 BEGIN -- Get a cursor on all the other records DECLARE Cur2 CURSOR FOR select start, end from table1 and id != @id OPEN Cur2 FETCH NEXT FROM Cur2 INTO @OtherStart, @OtherEnd WHILE @@FETCH_STATUS = 0 AND @endCheck = 0 BEGIN if ( @Start > @OtherStart AND @Start < @OtherEnd OR @End > @OtherStart AND @End < @OtherEnd ) or ( @OtherStart > @Start AND @OtherStart < @End OR @OtherEnd > @Start AND @OtherEnd < @End ) BEGIN SET @endCheck = 1 END FETCH NEXT FROM Cur2 INTO @OtherStart, @OtherEnd END CLOSE Cur2 DEALLOCATE Cur2 FETCH NEXT FROM Cur1 INTO @id, @Start, @End END CLOSE Cur1 DEALLOCATE Cur1

    Read the article

  • C++: getting the address of the start of an std::vector ?

    - by shoosh
    Sometimes it is useful to use the starting address of an std::vector and temporarily treat that address as the address of a regularly allocated buffer. For instance replace this: char* buf = new char[size]; fillTheBuffer(buf, size); useTheBuffer(buf, size); delete[] buf; With This: vector<char> buf(size); fillTheBuffer(&buf[0], size); useTheBuffer(&buf[0], size); The advantage of this is of course that the buffer is deallocated automatically and I don't have to worry about the delete[]. The problem I'm having with this is when size == 0. In that case the first version works ok. An empty buffer is "allocated" and the subsequent functions do nothing size they get size == 0. The second version however fails if size == 0 since calling buf[0] may rightly contain an assertion that 0 < size. So is there an alternative to the idiom &buf[0] that returns the address of the start of the vector even if the vector is empty? I've also considered using buf.begin() but according to the standard it isn't even guaranteed to return a pointer.

    Read the article

  • how to clear a data in tableviewcell again start reload?

    - by Ios_learner
    i'm developing a bluetooth apps.1) I want to hide a tableview when i start the apps..after i pressed a action button i want to enable a tableview.. 2)if i again press a action button means tableviewcell clear the data and show empty before searching..give me an idea.. some of the code- - (IBAction)connectButtonTouched:(id)sender { [self.deviceTable reloadData]; self.connectButton.enabled = YES; [self.deviceTable reloadData]; peripheralManager = [[PeripheralManager alloc] init]; peripheralManager.delegate = self; [peripheralManager scanForPeripheralsAndConnect]; [self.deviceTable reloadData]; [NSTimer scheduledTimerWithTimeInterval:(float)5.0 target:self selector:@selector (connectionTimer:) userInfo:nil repeats:YES]; alert=[[UIAlertView alloc] initWithTitle:@"Bluetooth" message:@"Scanning" delegate:nil cancelButtonTitle:@"Cancel" otherButtonTitles:nil]; UIActivityIndicatorView *progress=[[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(125, 50, 30, 30)]; [alert addSubview:progress]; [progress startAnimating]; [alert show]; } tableview -(NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [device count]; } -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier=@"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if(cell==nil) { cell =[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier]; } cell.textLabel.text=[device objectAtIndex:indexPath.row]; cell.accessoryType=UITableViewCellAccessoryDetailDisclosureButton; return cell; } TableView Delegate - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { UITableViewCell *cell=[tableView cellForRowAtIndexPath:indexPath]; [self performSegueWithIdentifier:@"TableDetails" sender:tableView]; }

    Read the article

  • Start a short video when an incoming call is detected, first case using the emulator.

    - by Emanuel
    I want to be able to start a short video on an incoming phone call. The video will loop until the call is answered. I've loaded the video onto the emulator sdcard then created the appropriate level avd with a path to the sdcard.iso file on disk. Since I'm running on a Mac OS x snow leopard I am able to confirm the contents of the sdcard. All testing has be done on the Android emulator. In a separate project TestVideo I created an activity that just launches the video from the sdcard. That works as expected. Then I created another project TestIncoming that creates an activity that creates a PhoneStateListener that overrides the onCallStateChanged(int state, String incomingNumber) method. In the onCallStateChanged() method I check if state == TelephonyManager.CALL_STATE_RINGING. If true I create an Intent that starts the video. I'm actually using the code from the TestVideo project above. Here is the code snippet. PhoneStateListener callStateListener = new PhoneStateListener() { @Override public void onCallStateChanged(int state, String incomingNumber) { if(state == TelelphonyManager.CALL_STATE_RINGING) { Intent launchVideo = new Intent(MyActivity.this, LaunchVideo.class); startActivity(launchVideo); } } }; The PhoneStateListener is added to the TelephonyManager.listen() method like so, telephonyManager.listen(callStateListener, PhoneStateListener.LISTEN_CALL_STATE); Here is the part I'm unclear on, the manifest. What I've tried is the following: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.incomingdemo" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".IncomingVideoDemo" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.ANSWER" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> </activity> <activity android:name=".LaunchVideo" android:label="LaunchVideo"> </activity> </application> <uses-sdk android:minSdkVersion="2" /> <uses-permission android:name="android.permission.READ_PHONE_STATE"/> </manifest> I've run the debugger after setting breakpoints in the IncomingVideoDemo activity where the PhoneStateListener is created and none of the breakpoints are hit. Any insights into solving this problem is greatly appreciated. Thanks.

    Read the article

  • State machines in C#

    - by Sir Psycho
    Hi, I'm trying to work out what's going on with this code. I have two threads iterating over the range and I'm trying to understand what is happening when the second thread calls GetEnumerator(). This line in particular (T current = start;), seems to spawn a new 'instance' in this method by the second thread. Seeing that there is only one instance of the DateRange class, I'm trying to understand why this works. Thanks in advance. class Program { static void Main(string[] args) { var daterange = new DateRange(DateTime.Now, DateTime.Now.AddDays(10), new TimeSpan(24, 0, 0)); var ts1 = new ThreadStart(delegate { foreach (var date in daterange) { Console.WriteLine("Thread " + Thread.CurrentThread.ManagedThreadId + " " + date); } }); var ts2 = new ThreadStart(delegate { foreach (var date in daterange) { Console.WriteLine("Thread " + Thread.CurrentThread.ManagedThreadId + " " + date); } }); Thread t1 = new Thread(ts1); Thread t2 = new Thread(ts2); t1.Start(); Thread.Sleep(4000); t2.Start(); Console.Read(); } } public class DateRange : Range<DateTime> { public DateTime Start { get; private set; } public DateTime End { get; private set; } public TimeSpan SkipValue { get; private set; } public DateRange(DateTime start, DateTime end, TimeSpan skip) : base(start, end) { SkipValue = skip; } public override DateTime GetNextElement(DateTime current) { return current.Add(SkipValue); } } public abstract class Range<T> : IEnumerable<T> where T : IComparable<T> { readonly T start; readonly T end; public Range(T start, T end) { if (start.CompareTo(end) > 0) throw new ArgumentException("Start value greater than end value"); this.start = start; this.end = end; } public abstract T GetNextElement(T currentElement); public IEnumerator<T> GetEnumerator() { T current = start; do { Thread.Sleep(1000); yield return current; current = GetNextElement(current); } while (current.CompareTo(end) < 1); } System.Collections.IEnumerator System.Collections.IEnumerable.GetEnumerator() { return GetEnumerator(); } }

    Read the article

  • getSymbols and using lapply, Cl, and merge to extract close prices

    - by algotr8der
    I've been messing around with this for some time. I recently started using the quantmod package to perform analytics on stock prices. I have a ticker vector that looks like the following: > tickers [1] "SPY" "DIA" "IWM" "SMH" "OIH" "XLY" "XLP" "XLE" "XLI" "XLB" "XLK" "XLU" "XLV" [14] "QQQ" > str(tickers) chr [1:14] "SPY" "DIA" "IWM" "SMH" "OIH" "XLY" "XLP" "XLE" ... I wrote a function called myX to use in a lapply call to save prices for every stock in the vector tickers. It has the following code: myX <- function(tickers, start, end) { require(quantmod) getSymbols(tickers, from=start, to=end) } I call lapply by itself library(quantmod) lapply(tickers,myX,start="2001-03-01", end="2011-03-11") > lapply(tickers,myX,start="2001-03-01", end="2011-03-11") [[1]] [1] "SPY" [[2]] [1] "DIA" [[3]] [1] "IWM" [[4]] [1] "SMH" [[5]] [1] "OIH" [[6]] [1] "XLY" [[7]] [1] "XLP" [[8]] [1] "XLE" [[9]] [1] "XLI" [[10]] [1] "XLB" [[11]] [1] "XLK" [[12]] [1] "XLU" [[13]] [1] "XLV" [[14]] [1] "QQQ" That works fine. Now I want to merge the Close prices for every stock into an object that looks like # BCSI.Close WBSN.Close NTAP.Close FFIV.Close SU.Close # 2011-01-03 30.50 20.36 57.41 134.33 38.82 # 2011-01-04 30.24 19.82 57.38 132.07 38.03 # 2011-01-05 31.36 19.90 57.87 137.29 38.40 # 2011-01-06 32.04 19.79 57.49 138.07 37.23 # 2011-01-07 31.95 19.77 57.20 138.35 37.30 # 2011-01-10 31.55 19.76 58.22 142.69 37.04 Someone recommended I try something like the following: ClosePrices <- do.call(merge, lapply(tickers, function(x) Cl(get(x)))) However I tried various combinations of this without any success. First I tried just calling lapply with Cl(x) >lapply(tickers,myX,start="2001-03-01", end="2011-03-11") Cl(myX))) > lapply(tickers,myX,start="2001-03-01", end="2011-03-11") Cl(x))) Error: unexpected symbol in "lapply(tickers,myX,start="2001-03-01", end="2011-03-11") Cl" > > lapply(tickers,myX(x),start="2001-03-01", end="2011-03-11") Cl(x))) Error: unexpected symbol in "lapply(tickers,myX(x),start="2001-03-01", end="2011-03-11") Cl" > > lapply(tickers,myX(start="2001-03-01", end="2011-03-11") Cl(x) Error: unexpected symbol in "lapply(tickers,myX(start="2001-03-01", end="2011-03-11") Cl" > lapply(tickers,myX(start="2001-03-01", end="2011-03-11") Cl(x)) Error: unexpected symbol in "lapply(tickers,myX(start="2001-03-01", end="2011-03-11") Cl" > Any guidance would be kindly appreciated.

    Read the article

  • How does a game developer get feedback from gamers (not developers) or start a forum community without paying for advertising or hiring Q&A teams?

    - by Carter81
    I am familiar with a lot of game developer forums, but I'd assume this is much less likely to attract more casual commentators. I also fear that feedback from a gamer's perspective would often be tainted by their game dev perspective. For example, if I were making a RTS game and wanted to get feedback from "The RTS gamers" where would I go? Is there a general idea of what type of website or forum to go to? Do you go to specific game websites, to try to "steal" attention? Would this not equate to spam or inappropriate posting? What is considered appropriate and inappropriate? I am not asking for specifics. I am asking how one "starts a community", or how one "gets feedback from gamers" without resorting to spamming forums or 'advertising' just to see what sticks. What TYPE OF PLACE does one go? Are there already sites designed for this purpose? I tried going to what was once a very popular forum for feedback from what I believed was a niche hardcore group of gamers in the genre, but its popularity seemed to have died significantly; Leaving only trolls and very young teenagers. The resulting feedback was quite disappointing, mainly for how little feedback it resulted. Many years ago, feedback would flood in by the hundreds so quickly. Without this website, I am at a loss as to where to go to see what people think of ideas, gather feedback from a gamer's perspective (not a developer's perspective), or where to pull from to start my own site's forum. I am out of ideas of what to do, short of going to various game forums to post in the off-topic sections there.

    Read the article

  • Why is my arrow texture being drawn in odd places?

    - by tyjkenn
    This is a script I wrote that places an arrow on the screen, pointing to an enemy off-screen, or, if the enemy is on-screen, it places an arrow hovering above the enemy. Everything seems to work, except for some odd reason, I see random arrows floating around, often skewed and resized (which I really don't understand, because I only rotate and place in this script). Even when I only have one enemy in the scene, I still see these random arrows. It should only be drawing one per enemy. Note: when all enemies are removed, no arrows appear. var arrow : Texture; var cam : Camera; var dim : int = 30; function OnGUI() { var objects = GameObject.FindGameObjectsWithTag("Enemy"); for(var ob : GameObject in objects) { var pos = cam.WorldToViewportPoint(ob.transform.position); if(gameObject.GetComponent(FollowCamera).target != null){ var tar = gameObject.GetComponent(FollowCamera).target.parent; } if(pos.z>1 && ob.transform != tar){ var xDiff = (pos.x*cam.pixelWidth)-(cam.pixelWidth/2); var yDiff = (pos.y*cam.pixelHeight)-(cam.pixelHeight/2); var angle = Mathf.Rad2Deg*Mathf.Atan(yDiff/xDiff)+180; if(xDiff>0) angle += 180; var dist = Mathf.Sqrt(xDiff*xDiff + yDiff*yDiff); var slope = yDiff/xDiff; var camSlope = cam.pixelHeight/cam.pixelWidth; var theX = -1000.0; var theY = -1000.0; var mult = 0; var temp; if(Mathf.Abs(xDiff)>(cam.pixelWidth/2)||Mathf.Abs(yDiff)>(cam.pixelHeight/2)){ //touching right if(slope<camSlope && slope>-camSlope) { if(xDiff>(cam.pixelWidth/2)) { theX = cam.pixelWidth - (dim/2); mult = -1; }else if(xDiff<-(cam.pixelWidth/2)) { theX = (dim/2); mult = 1; } temp = ((cam.pixelWidth/2)*yDiff)/xDiff; theY =(cam.pixelHeight/2)+(mult*temp); } else{ if(yDiff>(cam.pixelHeight/2)) { theY = (dim/2); mult = 1; }else if(yDiff<-(cam.pixelHeight/2)) { theY = cam.pixelHeight - (dim/2); mult = -1; } temp = ((cam.pixelHeight/2)*xDiff)/yDiff; theX =(cam.pixelWidth/2)+(mult*temp); } } else { angle = -90; theX = (cam.pixelWidth/2)+xDiff; theY = (cam.pixelHeight/2)-yDiff-dim; } GUIUtility.RotateAroundPivot(-angle, Vector2(theX, theY)); Graphics.DrawTexture(Rect(theX-(dim/2),theY-(dim/2),dim,dim),arrow,null); GUIUtility.RotateAroundPivot(angle, Vector2(theX, theY)); } } }

    Read the article

  • JQuery Validation [migrated]

    - by user41354
    Im trying to get my form to validate...so basically its working, but a little bit too well, I have two text boxes, one is a start date, the other an end date in the format of mm/dd/yyyy if the start date is greater than the end date...there is an error if the end date is less than the start date...there is an error if the start date is less than today's date...there is an error The only thing is when I correct the error, the error warning is still there...here is my code: dates.change(function () { var testDate = $(this).val(); var otherDate = dates.not(this).val(); var now = new Date(); now.setHours(0, 0, 0, 0); // Pass Dates if (testDate != '' && new Date(testDate) < now) { addError($(this)); $('.flightDateError').text('* Dates cannot be earlier than today.'); isValid = false; return; } // Required Text if ($(this).hasClass("FromCal") && testDate == '') { addError($(this)); $('.flightDateError').text('* Required'); isValid = false; return; } // Validate Date if (!isValidDate(testDate)) { // $(this).addClass('validation_error_input'); addError($(this)); $('.flightDateError').text('* Invalid Date'); isValid = false; return; } else { // $(this).removeClass('validation_error_input'); removeError($(this)); if (!dates.not(this).hasClass('validation_error_input')) $('.flightDateError').text(' '); } // Validate Date Ranges if ($(this).val() != '' && dates.not(this).val != '') { if ($(this).hasClass("FromCal")) { if (new Date(testDate) > new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* Start date must be earlier than end date.'); isValid = false; return; } } else{ if (new Date(testDate) < new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* End date must be later than start date.'); return; } } } }); The main Issue is this part, I believe // Validate Date Ranges if ($(this).val() != '' && dates.not(this).val != '') { if ($(this).hasClass("FromCal")) { if (new Date(testDate) > new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* Start date must be earlier than end date.'); isValid = false; return; } } else{ if (new Date(testDate) < new Date(otherDate)) { addError($(this)); $('.flightDateError').text('* End date must be later than start date.'); return; } } } testDate is the start date otherDate is the end date Thanks in advanced, J

    Read the article

  • How to allow multiple filters to be selected - pagination?

    - by NewSOuser
    Hey, I am still trying to allow multiple filters to be selected for my pagination script but not sure how to do it being very new to php and programing in general. So in my pagination, when a user clicks the 'marketing' button(link) it queries the database just for the category that = marketing. The same goes for the other 2 filter buttons as seen in the script below. (automotive, sports). The problem is, I want to be able to select multiple filters like only marketing and auomotive or automotive and sports, for example if I click the marketing filter and then the automotive, it would display the categories that equal marketing, and automotive. I have no idea how to accomplish this, so I have come to the experts to help me out. This is the script I am working on: <h3>Filter results by:</h3> <a href='pagi_test.php?category=marketing'>marketing</a> <a href='pagi_test.php?category=automotive'>automotive</a> <a href='pagi_test.php?category=sports'>sports</a> <br /> <h3>Results:</h3> <?php //connecting to the database $error = "Could not connect to the database"; mysql_connect('localhost','root','root') or die($error); mysql_select_db('ajax_demo') or die($error); //max displayed per page $per_page = 3; //get start variable $start = $_GET['start']; $category = mysql_real_escape_string($_GET['category']); //count records $record_count = mysql_num_rows(mysql_query("SELECT * FROM explore WHERE category='$category'")); //count max pages $max_pages = $record_count / $per_page; //may come out as decimal if (!$start) $start = 0; //display data $get = mysql_query("SELECT * FROM explore WHERE category='$category' LIMIT $start, $per_page"); ?> <table width="800px"> <?php while ($row = mysql_fetch_assoc($get)) { // get data $id = $row['id']; $site_name = $row['site_name']; $site_description = $row['site_description']; ?> <tr> <td><?php echo $id; ?></td> <td><?php echo $site_name; ?></td> <td><?php echo $site_description; ?></td> </tr> <?php } //setup prev and next variables $prev = $start - $per_page; $next = $start + $per_page; //show prev button if (!($start<=0)) echo "<a href='pagi_test.php?category=$category&start=$prev'>Prev</a> "; //show page numbers //set variable for first page $i=1; for ($x=0;$x<$record_count;$x=$x+$per_page) { if ($start!=$x) echo " <a href='pagi_test.php?category=$category&start=$x'>$i</a> "; else echo " <a href='pagi_test.php?category=$category&start=$x'><b>$i</b></a> "; $i++; } //show next button if (!($start>=$record_count-$per_page)) echo " <a href='pagi_test.php?category=$category&start=$next'>Next</a>"; ?> Any help on this would be great. Thank you. -- EDIT -- If anyone has a better method of doing a pagination system with multiple filters than the one above, please let me know.

    Read the article

  • how to add multiple filters to pagination?

    - by ClarkSKent
    Hey, I am trying to allow multiple filters to be selected for my pagination script. So in my pagination, when a user clicks the 'marketing' button(link) it queries the database just for the category that = marketing. The same goes for the other 2 filter buttons as seen in the script below. (automotive, sports). The problem is, I want to be able to select multiple filters like only marketing and auomotive or automotive and sports, for example if I click the marketing filter and then the automotive, it would display the categories that equal marketing, and automotive. I have no idea how to accomplish this, so I have come to the experts to help me out. This is the script I am working on (I am very new to PHP and programming in general): <h3>Filter results by:</h3> <a href='pagi_test.php?category=marketing'>marketing</a> <a href='pagi_test.php?category=automotive'>automotive</a> <a href='pagi_test.php?category=sports'>sports</a> <br /> <h3>Results:</h3> <?php //connecting to the database $error = "Could not connect to the database"; mysql_connect('localhost','root','root') or die($error); mysql_select_db('ajax_demo') or die($error); //max displayed per page $per_page = 3; //get start variable $start = $_GET['start']; $category = mysql_real_escape_string($_GET['category']); //count records $record_count = mysql_num_rows(mysql_query("SELECT * FROM explore WHERE category='$category'")); //count max pages $max_pages = $record_count / $per_page; //may come out as decimal if (!$start) $start = 0; //display data $get = mysql_query("SELECT * FROM explore WHERE category='$category' LIMIT $start, $per_page"); ?> <table width="800px"> <?php while ($row = mysql_fetch_assoc($get)) { // get data $id = $row['id']; $site_name = $row['site_name']; $site_description = $row['site_description']; ?> <tr> <td><?php echo $id; ?></td> <td><?php echo $site_name; ?></td> <td><?php echo $site_description; ?></td> </tr> <?php } //setup prev and next variables $prev = $start - $per_page; $next = $start + $per_page; //show prev button if (!($start<=0)) echo "<a href='pagi_test.php?category=$category&start=$prev'>Prev</a> "; //show page numbers //set variable for first page $i=1; for ($x=0;$x<$record_count;$x=$x+$per_page) { if ($start!=$x) echo " <a href='pagi_test.php?category=$category&start=$x'>$i</a> "; else echo " <a href='pagi_test.php?category=$category&start=$x'><b>$i</b></a> "; $i++; } //show next button if (!($start>=$record_count-$per_page)) echo " <a href='pagi_test.php?category=$category&start=$next'>Next</a>"; ?>

    Read the article

  • How do I get more separation between the end of the 1st div and the start of the 2nd div?

    - by user3075987
    I'm trying to get the 2nd div (the picture of the orange and copy) to go below the 1st div (the picture of the pear and copy), but see how the Orange copy is going up into the Pear copy. How can I have the Orange copy start below the Pear picture? Here's my jsfiddle: http://jsfiddle.net/huskydawgs/g8mbgr1e/4/ Here's my code: <div class="alignleft"> <p><img alt="Pear" src="http://eofdreams.com/data_images/dreams/pear/pear-01.jpg" width="144" height="150" /></p> The pear is native to coastal and mildly temperate regions of the Old World, from western Europe and north Africa east right across Asia. It is a medium-sized tree, reaching 10–17 metres (33–56 ft) tall, often with a tall, narrow crown; a few species are shrubby. The fruit is composed of the receptacle or upper end of the flower-stalk (the so-called calyx tube) greatly dilated. Enclosed within its cellular flesh is the true fruit: five cartilaginous carpels, known colloquially as the "core". From the upper rim of the receptacle are given off the five sepals[vague], the five petals, and the very numerous stamens. In ancient Egypt, artists used an orange mineral pigment called realgar for tomb paintings, as well as other uses. It was also used later by Medieval artists for the colouring of manuscripts. Pigments were also made in ancient times from a mineral known as orpiment. Orpiment was an important item of trade in the Roman Empire and was used as a medicine in China although it contains arsenic and is highly toxic. It was also used as a fly poison and to poison arrows. Because of its yellow-orange colour, it was also a favourite with alchemists searching for a way to make gold, both in China and the West. The pineapple is a herbaceous perennial which grows to 1.0 to 1.5 meters (3.3 to 4.9 ft) tall, although sometimes it can be taller. In appearance, the plant itself has a short, stocky stem with tough, waxy leaves. When creating its fruit, it usually produces up to 200 flowers, although some large-fruited cultivars can exceed this. Once it flowers, the individual fruits of the flowers join together to create what is commonly referred to as a pineapple. After the first fruit is produced, side shoots (called 'suckers' by commercial growers) are produced in the leaf axils of the main stem. These may be removed for propagation, or left to produce additional fruits on the original plant.[4] Commercially, suckers that appear around the base are cultivated. It has 30 or more long, narrow, fleshy, trough-shaped leaves with sharp spines along the margins that are 30 to 100 centimeters (1.0 to 3.3 ft) long, surrounding a thick stem. In the first year of growth, the axis lengthens and thickens, bearing numerous leaves in close spirals. After 12 to 20 months, the stem grows into a spike-like inflorescence up to 15 cm (6 in) long with over 100 spirally arranged, trimerous flowers, each subtended by a bract. Flower colors vary, depending on variety, from lavender, through light purple to red. Here's my CSS: .alignleft { float: left; margin: 0px 30px 20px 0px; } .alignright { float: right; margin: 0px 0px 20px 30px; }

    Read the article

  • JSON serialization of c# enum as string

    - by ob
    I have a class that contains an enum property, and upon serializing the object using JavaScriptSerializer, my json result contains the integer value of the enumeration rather than its string "name". Is there a way to get the enum as a string in my json without having to create a custom JavaScriptConverter? Perhaps there's an attribute that I could decorate the enum definition, or object property, with? As an example: enum Gender { Male, Female } class Person { int Age { get; set; } Gender Gender { get; set; } } desired json result: { "Age": 35, "Gender": "Male" }

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >