port 80 - Page 93 - Developer IT

wpf progress bar slows 10x times serial port communications... how could be possible that?

- by D_Guidi

I know that this could look a dumb question, but here's my problem. I have a worker dialog that "hides" a backgroundworker, so in a worker thread I do my job, I report the progress in a standard way and then I show the results in my WPF program. The dialog contains a simply animated gif and a standard wpf progress bar, and when a progress is notified I set Value property. All lokks as usual and works well for any kind of job, like web service calls, db queries, background elaboration and so on. For my job we use also many "couplers", card readers that reads data from smart card, that are managed with native C code that access to serial port (so, I don't use .NET SerialPort object). I have some nunit tests and I read a sample card in 10 seconds, but using my actual program, under the backgroundworker and showing my worker dialog, I need 1.30 minutes to do the SAME job. I struggled into problem for days until I decide to remove the worker dialog, and without dialog I obtain the same performances of the tests! So I investigated, and It's not the dialog, not the animated gif, but the wpf progress bar! Simply the fact that a progress bar is shown (so, no animation, no Value set called, nothing of nothing) slows serialport communicatitons. Looks incredible? I've tested this behavior and it's exactly what happens.

Read the article

Content Management for WebCenter Installation Guide

- by Gary Niu

Overvew As we known, there are two way to install Content Management for WebCenter. One way is install it by WebCenter installer wizard, another way is to install it use their own installer. This guide is for the later one. For SSO purpose, I also mentioned how to config OID identity store for Content Management for WebCenter. Content Management for WebCenter( 10.1.3.5.1) Oracle Enterprise Linux R5U4 Basic Installation -bash-3.2$ ./setup.sh Please select your locale from the list. 1. Chinese-Simplified 2. Chinese-Traditional 3. Deutsch *4. English-US 5. English-UK 6. EspaÃ±ol 7. FranÃ§ais 8. Italiano 9. Japanese 10. Korean 11. Nederlands 12. PortuguÃªs-Brazil Choice? Throughout the install, when entering a text value, you can press Enter to accept the default that appears between square brackets ([]). When selecting from a list, you can select the choice followed by an asterisk by pressing Enter. Select installation type from the list. *1. Install new server 2. Update a server Choice? Content Server Installation Directory Please enter the full pathname to the installation directory. Content Server Core Folder [/oracle/ucm/server]:/opt/oracle/ucm/server Create Directory *1. yes 2. no Choice? Java virtual machine *1. Sun Java 1.5.0_11 JDK 2. Specify a custom Java virtual machine Choice? Installing with Java version 1.5.0_11. Enter the location of the native file repository. This directory contains the native files checked in by contributors. Content Server Native Vault Folder [/opt/oracle/ucm/server/vault/]: Create Directory *1. yes 2. no Choice? Enter the location of the web-viewable file repository. This directory contains files that can be accessed through the web server. Content Server Weblayout Folder [/opt/oracle/ucm/server/weblayout/]: Create Directory *1. yes 2. no Choice? This server can be configured to manage its own authentication or to allow another master to act as an authentication proxy. Configure this server as a master or proxied server. *1. Configure as a master server. 2. Configure as server proxied by a local master server. Choice? During installation, an admin server can be installed and configured to manage this server. If there is already an admin server on this system, you can have the installer configure it to administrate this server instead. Select admin server configuration. *1. Install an admin server to manage this server. 2. Configure an existing admin server to manage this server. 3. Don't configure an admin server. Choice? Enter the location of an executable to start your web browser. This browser will be used to display the online help. Web Browser Path [/usr/bin/firefox]: Content Server System locale 1. Chinese-Simplified 2. Chinese-Traditional 3. Deutsch *4. English-US 5. English-UK 6. EspaÃ±ol 7. FranÃ§ais 8. Italiano 9. Japanese 10. Korean 11. Nederlands 12. PortuguÃªs-Brazil Choice? Please select the region for your timezone from the list. *1. Use the timezone setting for your operating system 2. Pacific 3. America 4. Atlantic 5. Europe 6. Africa 7. Asia 8. Indian 9. Australia Choice? Please enter the port number that will be used to connect to the Content Server. This port must be otherwise unused. Content Server Port [4444]: Please enter the port number that will be used to connect to the Admin Server. This port must be otherwise unused. Admin Server Port [4440]: Enter a security filter for the server port. Hosts which are allowed to communicate directly with the server port may access any resources managed by the server. Insure that hosts which need access are included in the filter. See the installation guide for more details. Incoming connection address filter [127.0.0.1]:*.*.*.* *** Content Server URL Prefix The URL prefix specified here is used when generating HTML pages that refer to the contents of the weblayout directory within the installation. This prefix must be mapped in the web server Additional Document Directories section of the Content Management administration menu to the physical location of the weblayout directory. For example, "/idc/" would be used in your installation to refer to the URL http://ucm.company.com/idc which would be mapped in the web server to the physical location /oracle/ucm/server/weblayout. Web Server Relative Root [/idc/]: Enter the name of the local mail server. The server will contact this system to deliver email. Company Mail Server [mail]: Enter the e-mail address for the system administrator. Administrator E-Mail Address [sysadmin@mail]: *** Web Server Address Many generated HTML pages refer to the web server you are using. The address specified here will be used when generating those pages. The address should include the host and domain name in most cases. If your webserver is running on a port other than 80, append a colon and the port number. Examples: www.company.com, ucm.company.com:90 Web Server HTTP Address [yekki]:yekki.cn.oracle.com:7777 Enter the name for this instance. This name should be unique across your entire enterprise. It may not contain characters other than letters, numbers, and underscores. Server Instance Name [idc]: Enter a short label for this instance. This label is used on web pages to identify this instance. It should be less than 12 characters long. Server Instance Label [idc]: Enter a long description for this instance. Server Description [Content Server idc]: Web Server *1. Apache 2. Sun ONE 3. Configure manually Choice? Please select a database from the list below to use with the Content Server. Content Server Database *1. Oracle 2. Microsoft SQL Server 2005 3. Microsoft SQL Server 2000 4. Sybase 5. DB2 6. Custom JDBC settings 7. Skip database configuration Choice? Manually configure JDBC settings for this database 1. yes *2. no Choice? Oracle Server Hostname [localhost]: Oracle Listener Port Number [1521]: *** Database User ID The user name is used to log into the database used by the content server. Oracle User [user]:YEKKI_OCSERVER *** Database Password The password is used to log into the database used by the content server. Oracle Password []:oracle Oracle Instance Name [ORACLE]:orcl Configure the JVM to find the JDBC driver in a specific jar file 1. yes *2. no Choice? The installer can attempt to create the database tables or you can manually create them. If you choose to manually create the tables, you should create them now. Attempt to create database tables 1. yes *2. no Choice? Select components to install. 1. ContentFolios: Collect related items in folios 2. Folders_g: Organize content into hierarchical folders 3. LinkManager8: Hypertext link management support 4. OracleTextSearch: External Oracle 11g database as search indexer support 5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: 1,2,3,4,5 *1. ContentFolios: Collect related items in folios *2. Folders_g: Organize content into hierarchical folders *3. LinkManager8: Hypertext link management support *4. OracleTextSearch: External Oracle 11g database as search indexer support *5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: F Checking configuration. . . Configuration OK. Review install settings. . . Content Server Core Folder: /opt/oracle/ucm/server Java virtual machine: Sun Java 1.5.0_11 JDK Content Server Native Vault Folder: /opt/oracle/ucm/server/vault/ Content Server Weblayout Folder: /opt/oracle/ucm/server/weblayout/ Proxy authentication through another server: no Install admin server: yes Web Browser Path: /usr/bin/firefox Content Server System locale: English-US Content Server Port: 4444 Admin Server Port: 4440 Incoming connection address filter: *.*.*.* Web Server Relative Root: /idc/ Company Mail Server: mail Administrator E-Mail Address: sysadmin@mail Web Server HTTP Address: yekki.cn.oracle.com:7777 Server Instance Name: idc Server Instance Label: idc Server Description: Content Server idc Web Server: Apache Content Server Database: Oracle Manually configure JDBC settings for this database: false Oracle Server Hostname: localhost Oracle Listener Port Number: 1521 Oracle User: YEKKI_OCSERVER Oracle Password: 6GP1gBgzSyKa4JW10U8UqqPznr/lzkNn/Ojf6M8GJ8I= Oracle Instance Name: orcl Configure the JVM to find the JDBC driver in a specific jar file: false Attempt to create database tables: no Components: ContentFolios,Folders_g,LinkManager8,OracleTextSearch,ThreadedDiscussions Proceed with install *1. Proceed 2. Change configuration 3. Recheck the configuration 4. Abort installation Choice? Finished install type Install with warnings at 4/2/10 12:32 AM. Run Scripts -bash-3.2$ ./wc_contentserverconfig.sh /opt/oracle/ucm/server /mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/CS10gR35UpdateBundle.zip' Service 'DELETE_DOC' Extended Service 'DELETE_BYREV_REVISION' Extended Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/ContentAccess/ContentAccess-linux.zip' (internal) 04.02 00:40:38.019 main updateDocMetaDefinitionV11: adding decimal column Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/Folders_g.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/FusionLibraries.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/JpsUserProvider.zip' Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/WcConfigure.zip' Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Restart Content Server to apply updates. Configuring Apache Web Server append the following lines at httpd.conf: include "/opt/oracle/ucm/server/data/users/apache22/apache.conf" Configuring the Identity Store( Optional ) 1. Stop Oracle Content Server and the Admin Server 2. Update the Oracle Content Server's JPS configuration file, jps-config.xml: a. add a service instance <serviceInstance provider="idstore.ldap.provider" name="idstore.oid"> <property name="subscriber.name" value="dc=cn,dc=oracle,dc=com"></property> <property name="idstore.type" value="OID"></property> <property name="security.principal.key" value="ldap.credential"></property> <property name="security.principal.alias" value="JPS"></property> <property name="ldap.url" value="ldap://yekki.cn.oracle.com:3060"></property> <extendedProperty> <name>user.search.bases</name> <values> <value>cn=users,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <extendedProperty> <name>group.search.bases</name> <values> <value>cn=groups,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <property name="username.attr" value="uid"></property> <property name="user.login.attr" value="uid"></property> <property name="groupname.attr" value="cn"></property> </serviceInstance> b. Ensure that the <jpsContext> entry in the jps-config.xml file refers to the new serviceInstance, that is, idstore.oid and not idstore.ldap: <jpsContext name="default"> <serviceInstanceRef ref="idstore.oid"/> 3. Run the new script to setup the credentials for idstore.oid in the credential store: cd CONTENT_SERVER_HOME/custom/FusionLibraries/tools -bash-3.2$ ./run_credtool.sh Buildfile: ./../tools/credtool.xml [input] skipping input as property action has already been set. [input] Alias: [JPS] [input] Key: [ldap.credential] [input] User Name: cn=orcladmin [input] Password: welcome1 [input] JPS Config: [/opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml] manage-creds: [echo] @@@ Help: run 'ant manage-creds' command to see the detailed usage [java] Using default context in /opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml file for credential store. [java] Credential store location : /opt/oracle/ucm/server/config [java] Credential with map JPS key ldap.credential stored successfully! [java] [java] [java] Credential for map JPS and key ldap.credential is: [java] PasswordCredential name : cn=orcladmin [java] PasswordCredential password : welcome1 BUILD SUCCESSFUL Total time: 1 minute 27 seconds Testing 1. acces http://yekki.cn.oracle.com:7777/idc 2. login in with OID user, for example: orcladmin/welcome1 3. make sure your JpsUserProvider status is "good"

Read the article

What output and recording ports does the Java Sound API find on your computer?

- by Dave Carpeneto

Hi all - I'm working with the Java Sound API, and it turns out if I want to adjust recording volumes I need to model the hardware that the OS exposes to Java. Turns out there's a lot of variety in what's presented. Because of this I'm humbly asking that anyone able to help me run the following on their computer and post back the results so that I can get an idea of what's out there. A thanks in advance to anyone that can assist :-) import javax.sound.sampled.*; public class SoundAudit { public static void main(String[] args) { try { System.out.println("OS: "+System.getProperty("os.name")+" "+ System.getProperty("os.version")+"/"+ System.getProperty("os.arch")+"\nJava: "+ System.getProperty("java.version")+" ("+ System.getProperty("java.vendor")+")\n"); for (Mixer.Info thisMixerInfo : AudioSystem.getMixerInfo()) { System.out.println("Mixer: "+thisMixerInfo.getDescription()+ " ["+thisMixerInfo.getName()+"]"); Mixer thisMixer = AudioSystem.getMixer(thisMixerInfo); for (Line.Info thisLineInfo:thisMixer.getSourceLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Source Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}} for (Line.Info thisLineInfo:thisMixer.getTargetLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Target Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}}} } catch (Exception e) {e.printStackTrace();}} public static String AnalyzeControl(Control thisControl) { String type = thisControl.getType().toString(); if (thisControl instanceof BooleanControl) { return " Control: "+type+" (boolean)"; } if (thisControl instanceof CompoundControl) { System.out.println(" Control: "+type+ " (compound - values below)"); String toReturn = ""; for (Control children: ((CompoundControl)thisControl).getMemberControls()) { toReturn+=" "+AnalyzeControl(children)+"\n";} return toReturn.substring(0, toReturn.length()-1);} if (thisControl instanceof EnumControl) { return " Control:"+type+" (enum: "+thisControl.toString()+")";} if (thisControl instanceof FloatControl) { return " Control: "+type+" (float: from "+ ((FloatControl) thisControl).getMinimum()+" to "+ ((FloatControl) thisControl).getMaximum()+")";} return " Control: unknown type";} } All the application does is print out a line about the OS, a line about the JVM, and a few lines about the hardware found that may pertain to recording hardware. For example on my PC at work I get the following: OS: Windows XP 5.1/x86 Java: 1.6.0_07 (Sun Microsystems Inc.) Mixer: Direct Audio Device: DirectSound Playback [Primary Sound Driver] Mixer: Direct Audio Device: DirectSound Playback [SoundMAX HD Audio] Mixer: Direct Audio Device: DirectSound Capture [Primary Sound Capture Driver] Mixer: Direct Audio Device: DirectSound Capture [SoundMAX HD Audio] Mixer: Software mixer and synthesizer [Java Sound Audio Engine] Mixer: Port Mixer [Port SoundMAX HD Audio] Source Port: MICROPHONE source port Control: Microphone (compound - values below) Control: Select (boolean) Control: Microphone Boost (boolean) Control: Front panel microphone (boolean) Control: Volume (float: from 0.0 to 1.0) Source Port: LINE_IN source port Control: Line In (compound - values below) Control: Select (boolean) Control: Volume (float: from 0.0 to 1.0) Control: Balance (float: from -1.0 to 1.0)

Read the article

CSS Transform offset varies with text length

- by Mr. Polywhirl

I have set up a demo that has 5 floating <div>s with rotated text of varying length. I am wondering if there is a way to have a CSS class that can handle centering of all text regardless of length. At the moment I have to create a class for each length of characters in my stylesheet. This could get too messy. I have also noticed that the offsets get screwd up is I increase or decrease the size of the wrapping <div>. I will be adding these classes to divs through jQuery, but I still have to set up each class for cross-browser compatibility. .transform3 { -webkit-transform-origin: 65% 100%; -moz-transform-origin: 65% 100%; -ms-transform-origin: 65% 100%; -o-transform-origin: 65% 100%; transform-origin: 65% 100%; } .transform4 { -webkit-transform-origin: 70% 110%; -moz-transform-origin: 70% 110%; -ms-transform-origin: 70% 110%; -o-transform-origin: 70% 110%; transform-origin: 70% 110%; } .transform5 { -webkit-transform-origin: 80% 120%; -moz-transform-origin: 80% 120%; -ms-transform-origin: 80% 120%; -o-transform-origin: 80% 120%; transform-origin: 80% 120%; } .transform6 { -webkit-transform-origin: 85% 136%; -moz-transform-origin: 85% 136%; -ms-transform-origin: 85% 136%; -o-transform-origin: 85% 136%; transform-origin: 85% 136%; } .transform7 { -webkit-transform-origin: 90% 150%; -moz-transform-origin: 90% 150%; -ms-transform-origin: 90% 150%; -o-transform-origin: 90% 150%; transform-origin: 90% 150%; } Note: The offset values I set were eye-balled. Update Although I would like this handled with a stylesheet, I believe that I will have to calculate the transformations of the CSS in JavaScript. I have created the following demo to demonstrate dynamic transformations. In this demo, the user can adjust the font-size of the .v_text class and as long as the length of the text does not exceed the .v_text_wrapper height, the text should be vertically aligned in the center, but be aware that I have to adjust the magicOffset value. Well, I just noticed that this does not work in iOS...

Read the article

Would Apache running on port 8080 prevent dynamically loaded scripts in JavaScript?

- by editor

Had a nice PHP/HTML/JS prototype working on my personal Linode, then tried to throw it into a work machine. The page adds a script tag dynamically with some JavaScript. It's a bunch of Google charts that update based on different timeslices. That code looks something like this: // jQuery $.post to send the beginning and end timestamps $.post("channel_functions.php", data_to_post, function(data){ // the data that's returned is the javascript I want to load var script = document.createElement('script'); var head= document.getElementsByTagName('head')[0]; var script= document.createElement('script'); var text = document.createTextNode(data); script.type= 'text/javascript'; script.id = 'chart_data'; script.appendChild(text); // Adding script tag to page head.appendChild(script); // Call the function I know were present in the script tag loadTheCharts(); }); function loadTheCharts() { // These are the functions that were loaded dynamically // By this point the script tag is supposed be loaded, added and eval'd function1(); function2(); } Function1() and function2() don't exist until they get added to the dom, but I don't call loadTheCharts() until after the $.post has run so this doesn't seem to be a problem. I'm one of those dirty PHP coders you mother warned you about, so I'm not well versed in JavaScript beyond what I've read in the typical go-to O'Reilly books. But this code worked fine on my personal dev server, so I'm wondering why it wouldn't work on this new machine. The only difference in setup, from what I can tell, is that the new machine is running on port 8080, so it's 192.168.blah.blah:8080/index.php instead of nicedomain.com/index.php. I see the code was indeed added to the dom when I use webmaster tools to "view generated source" but in Firebug I get an error like "function2() is undefined" even though my understanding was that all script tags are eval'ed when added to . My question: Given what I've laid out, and that the machine is running on :8080, is there a reason anyone can think of as to why a dynamically loaded function like function2() would be defined on the Linode and not on the machine running Apache on 8080?

Read the article

Django: url tag reverse

- by Alexander A.Sosnovskiy

Can you help me to get url in my template: url(r'^page/(?P[-\d]+)$', 'show_port', {"template_name": "port.html"}, name="port",), href="{% url port page_num=1 %}" I want to get /page/1 as a result , but don't know how :( Caught an exception while rendering: Reverse for 'port' with arguments '()' and keyword arguments '{'page_num': 1}' not found. The same thing if href="{% url port 1 %}"

Read the article

How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

- by VedVals

My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

Read the article

NVIDIA 550M Drivers

- by DOOM

First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

Read the article

13.10 upgrade dropping wifi [on hold]

- by Daryl

Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

Read the article

vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

- by Ikalou

I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

Read the article

How to set a default value in an IF snippet?

- by kuti

Hello, I have the following snippet in a bash script written in Solaris 10: printf "port(389)=" read PORT if [[ $PORT == "" ]]; then PORT=389 fi What I am trying to get that if the user hits the enter key, the Port should be set to 389. The snippet above does not seem to be working. Any suggestions?

Read the article

trying to use mod_proxy with httpd and tomcat

- by techsjs2012

I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?>   <Server port="8105" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

Read the article

stunnel crashing

- by Jay

I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

Read the article

Windows Server 2003 RDP not listening on IPv6

- by Ian Boyd

i have a Windows Server 2003 machine; with IPv6 enabled: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : newland.local IP Address. . . . . . . . . . . . : 192.168.1.244 Subnet Mask . . . . . . . . . . . : 255.255.0.0 IP Address. . . . . . . . . . . . : 2001:470:¦¦¦¦:¦¦¦¦:¦¦¦:¦¦¦¦:¦¦¦¦:¦¦¦¦ IP Address. . . . . . . . . . . . : fe80::224:1dff:fe86:fdf2%4 Default Gateway . . . . . . . . . : 192.168.1.1 fe80::250:bfff:fe91:955f%4 i can connect to IIS server using IPv, remotely and locally, using IPv4 and IPv6: > telnet 127.0.0.1 80 (connects) > telnet 192.168.1.244 80 (connects) > telnet ::1 80 (connects) > telnet fe80::224:1dff:fe86:fdf2 80 (connects) And TCPView shows that the server is listening on port 80: Note: This is useful to establish that Windows Server 2003 does have support for IPv6 services. And i can connect to terminal services, locally and remotely, using IPv4: > telnet 127.0.0.1 3389 (connects) > telnet 192.168.1.244 3389 (connects) But i cannot connect to RDP, locally or remotely, over IPv6: > telnet ::1 3389 (fails to connect) > telnet fe80::224:1dff:fe86:fdf2 3389 (fails to connect) We can see that the system is listening on 3389: Except why won't it listen on port 3389 (ipv6)? Unfortunately it's not the firewall. Aside from the fact that i'm connecting locally (in which case the firewall doesn't apply), the firewall doesn't apply:

Read the article

Nginx error page with JSON response

- by Waseem

I'm trying to serve a maintenance page to clients making request to my application when it is under maintenance. Following is my nginx configuration for that purpose. server { recursive_error_pages on; listen 80; ... if (-f $document_root/maintenance.html) { return 503; } error_page 404 /404.html; error_page 500 502 504 /500.html; error_page 503 @503; location = /404.html { root $document_root; } location = /500.html { root $document_root; } location @503 { error_page 405 =/maintenance.html; if (-f $request_filename) { break; } rewrite ^(.*)$ /maintenance.html break; } } Lets say I have enabled maintenance of my site by creating a $document_root/maintenance.html. This file, correctly, is served when a user makes a request with with Accept header of text/html. $ curl http://server.com/ -i -v -X GET -H "Accept: text/html" * Adding handle: conn: 0xf89420 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0xf89420) send_pipe: 1, recv_pipe: 0 * About to connect() to server.com port 80 (#0) * Trying xxx.xxx.xxx.xxx... * Connected to server.com (xxx.xxx.xxx.xxx) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.33.0 > Host: server.com > Accept: text/html > < HTTP/1.1 503 Service Temporarily Unavailable HTTP/1.1 503 Service Temporarily Unavailable * Server nginx/1.1.19 is not blacklisted < Server: nginx/1.1.19 Server: nginx/1.1.19 < Date: Thu, 14 Nov 2013 11:16:16 GMT Date: Thu, 14 Nov 2013 11:16:16 GMT < Content-Type: text/html Content-Type: text/html < Content-Length: 27 Content-Length: 27 < Connection: keep-alive Connection: keep-alive < This is under maintenance. * Connection #0 to host server.com left intact Now some clients set Accept header to application/json. How do I send them a JSON response instead of maintenance.html? Following is the response that I get when setting Accept to application/json. $ curl http://server.com/ -i -v -X GET -H "Accept: application/json" * Adding handle: conn: 0x190c430 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x190c430) send_pipe: 1, recv_pipe: 0 * About to connect() to server.com port 80 (#0) * Trying xxx.xxx.xxx.xxx... * Connected to server.com (xxx.xxx.xxx.xxx) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.33.0 > Host: server.com > Accept: application/json > < HTTP/1.1 503 Service Temporarily Unavailable HTTP/1.1 503 Service Temporarily Unavailable * Server nginx/1.1.19 is not blacklisted < Server: nginx/1.1.19 Server: nginx/1.1.19 < Date: Thu, 14 Nov 2013 11:15:50 GMT Date: Thu, 14 Nov 2013 11:15:50 GMT < Content-Type: text/html Content-Type: text/html < Content-Length: 27 Content-Length: 27 < Connection: keep-alive Connection: keep-alive < This is under maintenance. * Connection #0 to host server.com left intact

Read the article

compile lastest bnx2 driver on debian squeeze

- by markus

I want to upgrade the bnx2 network card driver in a Dell Power Edge R410. I downloaded the latest driver version from the broadcom website. If I want to compile the driver it fails with the following errors: make make -C bnx2/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C /lib/modules/2.6.32-5-amd64/build SUBDIRS=/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' Building modules, stage 2. MODPOST 2 modules make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C bnx2x/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make -C /lib/modules/2.6.32-5-amd64/build M=`pwd` modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' CC [M] /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1009:1: error: "PCI_VPD_LRDT_ID_STRING" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1327:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1011:1: error: "PCI_VPD_LRDT_RO_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1328:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1013:1: error: "PCI_VPD_LRDT_RW_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1329:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1019:1: error: "PCI_VPD_SRDT_END" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1334:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1032: error: conflicting types for ‘pci_vpd_lrdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1355: error: previous definition of ‘pci_vpd_lrdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1037: error: conflicting types for ‘pci_vpd_srdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1366: error: previous definition of ‘pci_vpd_srdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1042: error: conflicting types for ‘pci_vpd_find_tag’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1391: error: previous declaration of ‘pci_vpd_find_tag’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1077: error: conflicting types for ‘pci_vpd_info_field_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1377: error: previous definition of ‘pci_vpd_info_field_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1082: error: conflicting types for ‘pci_vpd_find_info_keyword’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1403: error: previous declaration of ‘pci_vpd_find_info_keyword’ was here make[5]: *** [/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o] Fehler 1 make[4]: *** [_module_/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src] Fehler 2 make[3]: *** [sub-make] Fehler 2 make[2]: *** [all] Fehler 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: *** [bnx2x.o] Fehler 2 make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make: *** [l2build] Fehler 2

Read the article

Reuse remote ssh connections and reduce command/session logging verbosity?

- by ewwhite

I have a number of systems that rely on application-level mirroring to a secondary server. The secondary server pulls data by means of a series of remote SSH commands executed on the primary. The application is a bit of a black box, and I may not be able to make modifications to the scripts that are used. My issue is that the logging in /var/log/secure is absolutely flooded with requests from the service user, admin. These commands occur many times per second and have a corresponding impact on logs. They rely on passphrase-less key exchange. The OS involved is EL5 and EL6. Example below. Is there any way to reduce the amount of logging from these actions. (By user? By source?) Is there a cleaner way for the developers to perform these ssh executions without spawning so many sessions? Seems inefficient. Can I reuse the existing connections? Example log output: Jul 24 19:08:54 Cantaloupe sshd[46367]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46446]: Accepted publickey for admin from 172.30.27.32 port 33526 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46475]: Accepted publickey for admin from 172.30.27.32 port 33527 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46504]: Accepted publickey for admin from 172.30.27.32 port 33528 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46583]: Accepted publickey for admin from 172.30.27.32 port 33529 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46612]: Accepted publickey for admin from 172.30.27.32 port 33530 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46641]: Accepted publickey for admin from 172.30.27.32 port 33531 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46720]: Accepted publickey for admin from 172.30.27.32 port 33532 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46749]: Accepted publickey for admin from 172.30.27.32 port 33533 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46778]: Accepted publickey for admin from 172.30.27.32 port 33534 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46857]: Accepted publickey for admin from 172.30.27.32 port 33535 ssh2

Read the article

virtual host setup: can't access wordpress site without www

- by two7s_clash

I would like to access my site both with and without using the www. Currently it only works with. Leaving out the www just goes to a blank page. Also, wp-admin just loads a blank page too. I have set an A record for mysite.com and www.mysite.com, both pointing to my static Bitnami IP. I also have a subdomain mapped to another directory that is working just fine (conference.mysite.com and www.conference.mysite.com). I'm using a Bitnami stack on an AWS EC2 micro instance. Here is my httpd.conf: ServerRoot "/opt/bitnami/apache2" Listen 80 LoadModule authn_file_module modules/mod_authn_file.so blah blah blah.... LoadModule php5_module modules/libphp5.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> ServerAdmin [email protected] ServerName localhost:80 DocumentRoot "/opt/bitnami/apps/wordpress1/htdocs/" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> <Directory "/opt/bitnami/apps/wordpress1/htdocs/"> Options Indexes MultiViews +FollowSymLinks LanguagePriority en AllowOverride All Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html index.php </IfModule> <FilesMatch "^\\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error_log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \\"%r\\" %>s %b \\"%{Referer}i\\" \\"%{User-Agent}i\\"" combined LogFormat "%h %l %u %t \\"%r\\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \\"%r\\" %>s %b \\"%{Referer}i\\" \\"%{User-Agent}i\\" %I %O" combinedio </IfModule> CustomLog "logs/access_log" common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "/opt/bitnami/apache2/cgi-bin/" </IfModule> <Directory "/opt/bitnami/apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-mpm.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> AddType application/x-httpd-php .php .phtml LoadModule wsgi_module modules/mod_wsgi.so WSGIPythonHome /opt/bitnami/python ServerSignature Off ServerTokens Prod AddType application/x-httpd-php .php PHPIniDir "/opt/bitnami/php/etc" Include "/opt/bitnami/apps/phpmyadmin/conf/phpmyadmin.conf" ExtendedStatus On <Location /server-status> SetHandler server-status Order Deny,Allow Deny from all Allow from localhost </Location> Include "/opt/bitnami/apache2/conf/bitnami/httpd.conf" Include "/opt/bitnami/apps/virtualhost.conf" Here is my virtual hosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin xx DocumentRoot "/opt/bitnami/apps/wordpress1/htdocs" ServerName mbird.com ServerAlias www.mbird.com ErrorLog "logs/wordpress-error_log" CustomLog "logs/wordpress-access_log" common </VirtualHost> <Directory "/opt/bitnami/apps/wordpress1/htdocs"> Options Indexes MultiViews +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ### WordPress conference.mbird.com configuration ### <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/bitnami/apps/wordpress/htdocs" ServerName conference.mbird.com ServerAlias www.conference.mbird.com ErrorLog "logs/confwordpress-error_log" CustomLog "logs/confwordpress-access_log" common </VirtualHost> <Directory "/opt/bitnami/apps/wordpress/htdocs"> Options Indexes MultiViews +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ###

Read the article

stunnel crashing

- by Jay

I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

Read the article

How to make XAMPP virtual hosts accessible to VM's and other computers on LAN?

- by martin's

XAMPP running on Vista 64 Ultimate dev machine (don't think it matters). Machine / Browser configuration Safari, Firefox, Chrome and IE9 on dev machine IE7 and IE8 on separate XP Pro VM's (VMWare on dev machine) IE10 and Chrome on Windows 8 VM (VMware on dev machine) Safari, Firefox and Chrome running on a iMac (same network as dev) Safari, Firefox and Chrome running on a couple of Mac Pro's (same network as dev) IE7, IE8, IE9 running on other PC's on the same network as dev machine Development Configuration Multiple virtual hosts for different projects .local fake TLD for development No firewall restrictions on dev machine for Apache Some sites have .htaccess mapping www to non-www Port 80 is open in the dev machine's firewall Problem XAMPP local home page (http://192.168.1.98/xampp/) can be accessed from everywhere, real or virtual, by IP All .local sites can be accessed from the browsers on the dev machine. All .local sites can be accessed form the browsers in the XP VM's. Some .local sites cannot be accessed from IE10 or Chrome on the W8 VM Sites that cannot be accessed from W8 VM have a minimal .htaccess file No .local sites can be accessed from ANY machine (PC or Mac) on the LAN hosts on dev machine (relevant excerpt) 127.0.0.1 site1.local 127.0.0.1 site2.local 127.0.0.1 site3.local 127.0.0.1 site4.local 127.0.0.1 site5.local 127.0.0.1 site6.local 127.0.0.1 site7.local 127.0.0.1 site8.local 127.0.0.1 site9.local 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local httpd-vhosts.conf on dev machine (relevant excerpt) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost ServerAlias localhost *.localhost.* DocumentRoot D:/xampp/htdocs </VirtualHost> # ======================================== site1.local <VirtualHost *:80> ServerName site1.local ServerAlias site1.local *.site1.local DocumentRoot D:/xampp-sites/site1/public_html ErrorLog D:/xampp-sites/site1/logs/access.log CustomLog D:/xampp-sites/site1/logs/error.log combined <Directory D:/xampp-sites/site1> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory> </VirtualHost> NOTE: The above <VirtualHost *:80> block is repeated for each of the nine virtual hosts in the file, no sense in posting it here. hosts on all VM's and physical machines on the network (relevant excerpt) 127.0.0.1 localhost ::1 localhost 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local None of the VM's have any firewall blocks on http traffic. They can reach any site on the real Internet. The same is true of the real machines on the network. The biggest puzzle perhaps is that the W8 VM actually DOES reach some of the virtual hosts. It does NOT reach site2, site6 and site 9, all of which have this minimal .htaccess file. .htaccess file <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </IfModule> Adding this file to any of the virtual hosts that do work on the W8 VM will break the site (only for W8 VM, not the XP VM's) and require a cache flush on the W8 VM before it will see the site again after deleting the file. Regardless of whether a .htaccess file exists or not, no machine on the same LAN can access anything other than the XAMPP home page via IP. Even with hosts files on all machines. I can ping any virtual host from any machine on the network and get a response from the correct IP address. I can't see anything in out Netgear router that might prevent one machine from reaching the other. Besides, once the local hosts file resolves to an ip address that's all that goes out onto the local network. I've gone through an extensive number of posts on both SO and as the result of Google searches. I can't say that I have found anything definitive anywhere.

Read the article

How do bots access directories on a server that are not DocumentRoot of public IP address? How do I stop them?

- by tmsimont

I have a local network set up with apache2 and "named" running on OpenSuse 13.1 Linux. I used the "named" service to use my computer as a domain server. I set up my router to point to ask my computer for domain lookups, so I have a chance to have it rewrite a bunch of domains on my network to its own local IP, 192.168.0.111 This works great. I use virtual host configuration to allow various domains and subdomains (re-routed to the same IP via named) to pull up different directories in my computer. For example: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias fmb.wa.net DocumentRoot /home/work/wa.net/fmb </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias postrecord.wa.net DocumentRoot /home/work/wa.net/postrecord </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias cvalley.wa.net DocumentRoot /home/work/wa.net/cvalley_local </VirtualHost> This makes it possible for me to hit cvalley.wa.net from any device in my network and get the site that lives in /home/work/wa.net/cvalley_local I decided to forward port 80 to this computer, so I could share a few development sites with coworkers. I can't control which site they see with the same named service, because they'd have to use my computer as their domain name server... So I added a line like this: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias MY.IP.XXX.XX DocumentRoot /home/work/wa.net/cvalley </VirtualHost> Where "MY.IP.XXX.XX" is my public IP address. This works as expected, when you hit my IP address from a public network you see the site that lives in /home/work/wa.net/cvalley. The point of confusion that I have is that there are public IP addresses in my logs in other sites. I would have expected it to be impossible to access other sites in my network, unless the public user somehow figured out what I'm calling my ServerAliases, and is mimicing my domain set up... How can public traffic be hitting my other local sites? How can I recreate this kind of access? Here are some examples of public IP's hitting my VirtualHost sites: 162.253.66.76 - - [15/Aug/2014:19:20:47 -0600] "GET /xmlrpc.php HTTP/1.0" 404 1004 "-" "-" 162.253.66.74 - - [16/Aug/2014:10:50:28 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 185.4.227.194 - - [16/Aug/2014:11:16:45 -0600] "GET http://24x7-allrequestsallowed.com/?PHPSESSID=1rysxtj500143WQMVT%5E_NAZ%5BQ HTTP/1.1" 200 262 "-" "-" 101.226.254.138 - - [16/Aug/2014:13:32:14 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 162.253.66.74 - - [16/Aug/2014:14:26:19 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 212.129.2.119 - - [16/Aug/2014:16:00:51 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 91.240.163.111 - - [16/Aug/2014:18:34:32 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 162.253.66.74 - - [16/Aug/2014:19:02:53 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 122.226.223.69 - - [17/Aug/2014:05:53:09 -0600] "GET http://www.k2proxy.com//hello.html HTTP/1.1" 404 1006 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)" ::1 - - [17/Aug/2014:10:19:26 -0600] "OPTIONS * HTTP/1.0" 200 - "-" "Apache/2.4.6 (Linux/SUSE) OpenSSL/1.0.1e PHP/5.4.20 (internal dummy connection)" 162.209.65.196 - - [17/Aug/2014:15:31:53 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 111.206.199.163 - - [18/Aug/2014:11:12:56 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 37.187.180.168 - - [18/Aug/2014:15:40:00 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 62.210.38.226 - - [18/Aug/2014:18:35:16 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" Is there anything that I can do to reliably deny public access by default, but allow it only in one VirtualHost?

Read the article

libcurl - unable to download a file

- by marmistrz

I'm working on a program which will download lyrics from sites like AZLyrics. I'm using libcurl. It's my code lyricsDownloader.cpp #include "lyricsDownloader.h" #include <curl/curl.h> #include <cstring> #include <iostream> #define DEBUG 1 ///////////////////////////////////////////////////////////////////////////// size_t lyricsDownloader::write_data_to_var(char *ptr, size_t size, size_t nmemb, void *userdata) // this function is a static member function { ostringstream * stream = (ostringstream*) userdata; size_t count = size * nmemb; stream->write(ptr, count); return count; } string AZLyricsDownloader::toProviderCode() const { /*this creates an url*/ } CURLcode AZLyricsDownloader::download() { CURL * handle; CURLcode err; ostringstream buff; handle = curl_easy_init(); if (! handle) return static_cast<CURLcode>(-1); // set verbose if debug on curl_easy_setopt( handle, CURLOPT_VERBOSE, DEBUG ); curl_easy_setopt( handle, CURLOPT_URL, toProviderCode().c_str() ); // set the download url to the generated one curl_easy_setopt(handle, CURLOPT_WRITEDATA, &buff); curl_easy_setopt(handle, CURLOPT_WRITEFUNCTION, &AZLyricsDownloader::write_data_to_var); err = curl_easy_perform(handle); // The segfault should be somewhere here - after calling the function but before it ends cerr << "cleanup\n"; curl_easy_cleanup(handle); // copy the contents to text variable lyrics = buff.str(); return err; } main.cpp #include <QString> #include <QTextEdit> #include <iostream> #include "lyricsDownloader.h" int main(int argc, char *argv[]) { AZLyricsDownloader dl(argv[1], argv[2]); dl.perform(); QTextEdit qtexted(QString::fromStdString(dl.lyrics)); cout << qPrintable(qtexted.toPlainText()); return 0; } When running ./maelyrica Anthrax Madhouse I'm getting this logged from curl * About to connect() to azlyrics.com port 80 (#0) * Trying 174.142.163.250... * connected * Connected to azlyrics.com (174.142.163.250) port 80 (#0) > GET /lyrics/anthrax/madhouse.html HTTP/1.1 Host: azlyrics.com Accept: */* < HTTP/1.1 301 Moved Permanently < Server: nginx/1.0.12 < Date: Thu, 05 Jul 2012 16:59:21 GMT < Content-Type: text/html < Content-Length: 185 < Connection: keep-alive < Location: http://www.azlyrics.com/lyrics/anthrax/madhouse.html < Segmentation fault Strangely, the file is there. The same error is displayed when there's no such page (redirect to azlyrics.com mainpage) What am I doing wrong? Thanks in advance EDIT: I made the function for writing data static, but this changes nothing. Even wget seems to have problems $ wget http://www.azlyrics.com/lyrics/anthrax/madhouse.html --2012-07-06 10:36:05-- http://www.azlyrics.com/lyrics/anthrax/madhouse.html Resolving www.azlyrics.com... 174.142.163.250 Connecting to www.azlyrics.com|174.142.163.250|:80... connected. HTTP request sent, awaiting response... No data received. Retrying. Why does opening the page in a browser work and wget/curl not? EDIT2: After adding this: curl_easy_setopt(handle, CURLOPT_FOLLOWLOCATION, 1); The log is: * About to connect() to azlyrics.com port 80 (#0) * Trying 174.142.163.250... * connected * Connected to azlyrics.com (174.142.163.250) port 80 (#0) > GET /lyrics/anthrax/madhouse.html HTTP/1.1 Host: azlyrics.com Accept: */* < HTTP/1.1 301 Moved Permanently < Server: nginx/1.0.12 < Date: Fri, 06 Jul 2012 09:09:47 GMT < Content-Type: text/html < Content-Length: 185 < Connection: keep-alive < Location: http://www.azlyrics.com/lyrics/anthrax/madhouse.html < * Ignoring the response-body * Connection #0 to host azlyrics.com left intact * Issue another request to this URL: 'http://www.azlyrics.com/lyrics/anthrax/madhouse.html' * About to connect() to www.azlyrics.com port 80 (#1) * Trying 174.142.163.250... * connected * Connected to www.azlyrics.com (174.142.163.250) port 80 (#1) > GET /lyrics/anthrax/madhouse.html HTTP/1.1 Host: www.azlyrics.com Accept: */* < HTTP/1.1 200 OK < Server: nginx/1.0.12 < Date: Fri, 06 Jul 2012 09:09:47 GMT < Content-Type: text/html < Transfer-Encoding: chunked < Connection: keep-alive < Segmentation fault

Read the article

Slow wifi on Ubuntu 12.04 wifi driver ath9k

- by lunar

For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

Read the article

wcf http 504: Working on a mystery

- by James Fleming

Ok, So you're here because you've been trying to solve the mystery of why you're getting a 504 error. If you've made it to this lonely corner of the Internet, then the advice you're getting from other bloggers isn't the answer you are after. It wasn't the answer I needed either, so once I did solve my problem, I thought I'd share the answer with you. For starters, if by some miracle, you landed here first you may not already know that the 504 error is NOT coming from IIS or Casini, that response code is coming from Fiddler. HTTP/1.1 504 Fiddler - Receive Failure Content-Type: text/html Connection: close Timestamp: 09:43:05.193 ReadResponse() failed: The server did not return a response for this request. The take away here is Fiddler won't help you with the diagnosis and any further digging in that direction is a red herring. Assuming you've dug around a bit, you may have arrived at posts which suggest you may be getting the error because you're trying to hump too much data over the wire, and have an urgent need to employ an anti-pattern: due to a special case: http://delphimike.blogspot.com/2010/01/error-504-in-wcfnet-35.html Or perhaps you're experiencing wonky behavior using WCF-CustomIsolated Adapter on Windows Server 2008 64bit environment, in which case the rather fly MVP Dwight Goins' advice is what you need. http://dgoins.wordpress.com/2009/12/18/64bit-wcf-custom-isolated-%E2%80%93-rest-%E2%80%93-%E2%80%9C504%E2%80%9D-response/ For me, none of that was helpful. I could perform a get on a single record http://localhost:8783/Criterion/Skip(0)/Take(1) but I couldn't get more than one record in my collection as in: http://localhost:8783/Criterion/Skip(0)/Take(2) I didn't have a big payload, or a large number of objects (as you can see by the size of one record below) - - A-1B f5abd850-ec52-401a-8bac-bcea22c74138 .biological/legal mother This item refers to the supervisor’s evaluation of the caseworker’s ability to involve the biological/legal mother in the permanency planning process. 75d8ecb7-91df-475f-aa17-26367aeb8b21 false true Admin account 2010-01-06T17:58:24.88 1.20 764a2333-f445-4793-b54d-1c3084116daa So while I was able to retrieve one record without a hitch (thus the record above) I wasn't able to return multiple records. I confirmed I could get each record individually, (Skip(1)/Take(1))so it stood to reason the problem wasn't with the data at all, so I suspected a serialization error. The first step to resolving this was to enable WCF Tracing. Instructions on how to set it up are here: http://msdn.microsoft.com/en-us/library/ms733025.aspx. The tracing log led me to the solution. The use of type 'Application.Survey.Model.Criterion' as a get-only collection is not supported with NetDataContractSerializer. Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property. So I was wrong (but close!). The problem was a deserializing issue in trying to recreate my read only collection. http://msdn.microsoft.com/en-us/library/aa347850.aspx#Y1455 So looking at my underlying model, I saw I did have a read only collection. Adding a setter was all it took. public virtual ICollection<string> GoverningResponses { get { if (!string.IsNullOrEmpty(GoverningResponse)) { return GoverningResponse.Split(';'); } else return null; } } Hope this helps. If it does, post a comment.

Read the article

Why is Apache ignoring VirtualHost directive for first name in hosts file?

- by Peter Taylor

Standard pre-emptive disclaimer: host names, IP addresses, and directories are anonymised. Problem We have a server with Apache 2.2 (WAMP) listening on one IP and IIS listening on another. An ASP.Net application running under IIS needs to do some simple GETs from the PHP applications running under Apache to build a unified search results page. This is a virtual server, so the internal IPs are mapped somehow to external ones. The internal DNS system doesn't resolve the publicly published names under which the applications are accessed externally, so the obvious solution was to add them to etc/hosts with the internal IP address: 127.0.0.1 localhost # 10.0.1.17 is the IP address Apache listens on 10.0.1.17 phpappone.example.com 10.0.1.17 phpapptwo.example.com After restarting Apache, phpappone.example.com stopped working. Instead of returning pages from that app, Apache was returning pages from the default site. The other PHP apps worked fine. Relevant configuration httpd.conf, summarised, says: ServerAdmin [email protected] ServerRoot "c:/server/Apache2" ServerName www.example.com Listen 10.0.1.17:80 Listen 10.0.1.17:443 # Not obviously related config options elided # Nothing obviously astandard # If you want more details, post a comment DocumentRoot "c:/server/Apache2/htdocs" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # Fallback for unknown host names <Directory "c:/server/Apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> # PHP apps common config <Directory "C:/Inetpub/wwwroot/phpapps"> Options FollowSymLinks -Indexes +ExecCGI AllowOverride All Order Allow,Deny Allow from All </Directory> # Virtual hosts NameVirtualHost 10.0.1.17:80 NameVirtualHost 10.0.1.17:443 <VirtualHost _default_:80> </VirtualHost> <VirtualHost _default_:443> SSLEngine On SSLCertificateFile "certs/example.crt" SSLCertificateKeyFile "certs/example.key" </VirtualHost> Include conf/vhosts/*.conf and the vhosts files are e.g. <VirtualHost 10.0.1.17:80> ServerName phpappone.example.com DocumentRoot "c:/Inetpub/wwwroot/phpapps/phpappone" </VirtualHost> <VirtualHost 10.0.1.17:443> ServerName phpappone.example.com DocumentRoot "c:/Inetpub/wwwroot/phpapps/phpappone" SSLEngine On SSLCertificateFile "certs/example.crt" SSLCertificateKeyFile "certs/example.key" </VirtualHost> Buggy behaviour or our misunderstanding? The documentation for name-based virtual hosts says that Now when a request arrives, the server will first check if it is using an IP address that matches the NameVirtualHost. If it is, then it will look at each <VirtualHost> section with a matching IP address and try to find one where the ServerName or ServerAlias matches the requested hostname. If it finds one, then it uses the configuration for that server. If no matching virtual host is found, then the first listed virtual host that matches the IP address will be used. Yet that isn't what we observe. It seems that if the hostname is the first hostname listed against the IP address in etc/hosts then it uses the configuration from the main server and skips the virtual host lookup. Workarounds The workaround we've put in place for the time being is to add a fake line to the hosts file: 127.0.0.1 localhost # 10.0.1.17 is the IP address Apache listens on 10.0.1.17 fakename.example.com 10.0.1.17 phpappone.example.com 10.0.1.17 phpapptwo.example.com This fixes the problem, but it's not very elegant. In addition, it seems a bit brittle: reordering lines in the hosts file (or deleting the nonsense value) can break it. The other obvious workaround is to make the main server configuration match that of the troublesome virtual host, but that is equally brittle. A third option, which is just ugly, would be to change the ASP.Net code to take separate config items for the IP address and the hostname and to implement HTTP manually. Ugh. The question Is there a good solution to this problem which localises any "Do not touch this!" explanations to the Apache config files?

Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 93/626 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >

- by D_Guidi

- by Gary Niu

- by Dave Carpeneto

- by Mr. Polywhirl

- by editor

- by Alexander A.Sosnovskiy

- by VedVals

- by DOOM

- by Daryl

- by Ikalou

- by kuti

- by techsjs2012

- by Jay

- by Ian Boyd

- by Waseem

- by markus

- by ewwhite

- by two7s_clash

- by Jay

- by martin's

- by tmsimont

- by marmistrz

- by lunar

- by James Fleming

- by Peter Taylor

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >