Search Results

Search found 5024 results on 201 pages for 'sending'.

Page 93/201 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• rsync error: some files/attrs were not transferred

  - by Daniel Ball

  Using rsync(ubuntu) and a DeltaCopy server on W2K3 to back up some of the data on the file server before I migrate from W2K3 to Ubuntu server. After it completed I ran a dry run just in case something had been missed or changed ... I got the following: sudo rsync -az -n 198.3.9.25::Music /mnt/raid/music [sudo] password for daniel: file has vanished: "?????\#267????" (in Music) file has vanished: "????????" (in Music) ... rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1526) [generator=3.0.7] I just want to make sure I'm reading it right, that somehow there are files on the receiving end that aren't on the sending?

  Read the article

• Automated git push attempt does not work - authentication issue

  - by at least three characters

  I'm trying to automate a very periodic git add/commit/push cycle using a shell script and cron under OS X 10.8.5. The script is as basic as one would expect it to be: cd /my/directory git add . git commit -m "a commit message with the date" git push -u origin master I've tried running it both as root as well as a non-root user. When I do this manually, I get a dialog box from OS X requesting that I authenticate the operation. Running the script (either using cron or just using sh) ends up sending a message (via mail) to whichever user's cron executed the script saying that it was unable to write a file in the .git directory because of a permissions issue (which is most likely manual execution requires authentication). Is there any way to circumvent this issue, or give the script permission to perform this operation without having me intervene each time?

  Read the article

• Unicast traffic between hosts on a switch leaving the switch by its uplink. Why?

  - by Rich Lafferty

  I have a weird thing happening on our network at my office which I can't quite get my head around. In particular I can't tell if it's a problem with a switch, or a problem with configuration. We have a Cisco SG300-52 switch (sw01) in the top of a rack in our server room, connected to another SG300-28 that acts as our core switch (core01). Both run layer 2 only, our firewalls do routing between VLANs. They have a dozen or so VLANs between them. Gi1 on sw01 is a trunk port connected to gi1 on core01. (Disclosure: There are other switches in our environment but I'm pretty sure I've isolated the problem down to these two. Happy to provide more info if necessary.) The behaviour I'm seeing is limited to one VLAN, vlan 12 -- or, at least, it's not happening on the other ones I checked (It's hard to guarantee the absence of packets), and it is: sw01 is forwarding, to core01, traffic which is between two hosts which are both plugged into sw01. (I noticed this because the IDS in our firewall gave a false positive on traffic which should not reach the firewall.) We noticed this mostly between our two dhcp/dns servers, net01 (10.12.0.10) and net02 (10.12.0.11). net01 is physical hardware and net02 is on a VMware ESX server. net01 is connected to gi44 on sw01 and net02's ESX server to gi11. [net01]----gi44-[sw01]-gi1----gi1-[core01] [net02]----gi11/ Let's see some interfaces! Remember, vlan 12 is the problem vlan. Of the others I explicitly verified that vlan 27 was not affected. Here's the two hosts' ports: esx01 contains net02. sw01#sh run int gi11 interface gigabitethernet11 description esx01 lldp med disable switchport trunk allowed vlan add 5-7,11-13,100 switchport trunk native vlan 27 ! sw01#sh run int gi44 interface gigabitethernet44 description net01-1 lldp med disable switchport mode access switchport access vlan 12 ! Here's the trunk on sw01. sw01#sh run int gi1 interface gigabitethernet1 description "trunk to core01" lldp med disable switchport trunk allowed vlan add 4-7,11-13,27,100 ! And the other end of the trunk on core01. interface gigabitethernet1 description sw01 macro description switch switchport trunk allowed vlan add 2-7,11-16,27,100 ! I have a monitor port on core01, thus: core01#sh run int gi12 interface gigabitethernet12 description "monitor port" port monitor GigabitEthernet 1 ! And the monitor port on core01 sees unicast traffic going between net01 and net02, both of which are on sw01! I've verified this with a monitor port on sw01 that sees the net01-net02 unicast traffic leaving via gi1 too. sw01 knows that both of those hosts are on ports that are not its trunk port: :) ratchet$ arp -a | grep net net02.2ndsiteinc.com (10.12.0.11) at 00:0C:29:1A:66:15 [ether] on eth0 net01.2ndsiteinc.com (10.12.0.10) at 00:11:43:D8:9F:94 [ether] on eth0 sw01#sh mac addr addr 00:0C:29:1A:66:15 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:0c:29:1a:66:15 gi11 dynamic sw01#sh mac addr addr 00:11:43:D8:9F:94 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:11:43:d8:9f:94 gi44 dynamic I also brought up an unused port on sw01 on vlan 12, but the unicast traffic was (as best as I could tell) not coming out that port. So it doesn't look like sw01 is pushing it out all its ports, just the right ports and also gi1! I've verified that sw01 is not filling up its address-table: sw01#sh mac addr count This may take some time. Capacity : 8192 Free : 7983 Used : 208 The full configs for both core01 and sw01 are available: core01, sw01. Finally, versions: sw01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01 core01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 ) HW version V01 So my understanding is this: sw01 should take unicast traffic for net01 and send it only out net02's port, and vice versa; none of it should go out sw01's uplink. But core01, receiving traffic on gi1 for a host it knows is on gi1, is right in sending it out all of its ports. (That is: sw01 is misbehaving, but core01 is doing what it should given the circumstances.) My question is: Why is sw01 sending that unicast traffic out its uplink, gi1? (And pre-emptively: yes, I know SG300s leave much to be desired, and yes, we should have spanning-tree enabled, but that's where I'm at right now.)

  Read the article

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

• Why a SIGHUP signal to httpd kills the tomcat process?

  - by Geo

  I have a server with a tomcat process binding to port 80 and a httpd processes binding to port 5000. For some reason every time any process send a SIGHUP signal to httpd process my tomcat process disappears without error or anything. I fixed the issue on the server the following way, added an explicit ServerName directive in the httpd.conf and that fixed the issue. I still don't understand why the SIGHUP to httpd killed the tomcat process. NOTE 1: I replicated the kill signal with the following command: find out what the httpd pid is. cat /etc/httpd/run/httpd.pid 4056 then kill with a sighup signal kill -s SIGHUP 4056 NOTE 2: We troubleshoot the issue and find that logrotate running every morning at 4am was sending a SIGHUP signal to realease the logs to be able to rotate them, thus killing tomcat as well.

  Read the article

• securing server to server http post

  - by ad-inf

  Website is developed on JSF, Servlet, using apache web server. In my website, I accept data submission from few restricted websites using HTTP POST method. We exchange some secure key to ensure that correct source is sending data. But is there any way to ensure that the data is submitted from specific domain / IP address only? In application level I can check request.header('Referer') , but some proxy or firewall might hide the referer. Can this configuration done on firewall or webserver level to authenticate server to server communication? Eg. Say my website is a payment gateway website, integrated with www.abc.com. I want only abc.com to submit data. So a user using abc.com should be able to submit data to my website only through abc.com, and not any other website.

  Read the article

• Redirect URL within Apache VirtualHost?

  - by DisgruntledGoat

  I have a dedicated server with Apache, on which I've set up some VirtualHosts. I've set up one to handle the www domain as well as the non-www domain. My VH .conf file for the www: <VirtualHost *> DocumentRoot /var/www/site ServerName www.example.com <Directory "/var/www/site"> allow from all </Directory> </VirtualHost> With this .htaccess: RewriteEngine on RewriteBase / RewriteCond %{HTTP_HOST} ^www.example.com [NC] RewriteRule ^(.*)$ http://example.com/$1 [L,R=301] Is there a simple way to redirect the www to the non-www version? Currently I'm sending both versions to the same DocumentRoot and using .htaccess but I'm sure I must be able to do it in the VirtualHost file.

  Read the article

• Why would image thumbnails not be showing in all search engines in all browsers?

  - by Edward Tanguay

  For over a week now, when I search for a word at Google, it correctly gives me some preview image thumbnails: But when I click on "images", it doesn't show me any thumbnails: The same thing happens at Bing.com, when I search Bing itself it gives me some thumbnails on the general search result page: But when I click on "images", it doesn't show me any thumbnails: The same thing happens at Yahoo: If I click on one of the broken thumbnails, it shows me the picture fine: Thumbnails at youtube also work fine: It seems each search engine is hanging on different URLs as shown above: t1.gstatic.com ts3.mm.bing.net thm-a02.yimg.com so it doesn't seem to be the problem of one specific URL not sending thumbnails, it is just a problem with search engine image thumbnails in general. Also, this happens in every browser I try: Explorer, Firefox, Chrome. What could be the problem? Is it my computer, some setting somewhere, my router, my Internet provider (T-Online, Germany)? Has anyone ever had this problem and solved it?

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• Problem with socket communication between C# and Flex

  - by Chris Lee

  Hi all, I am implementing a simulated b/s stock data system. I am using flex and c# for client and server sides. I found flash has a security policy and I handled the policy-file-request in my server code. But seems it doesn't work, because the code jumped out at "socket.Receive(b)" after connection. I've tried sending message on client in the connection handler, in that case the server can receive correct message. But the auto-generated "policy-file-request" can never be received, and the client can get no data sending from server. Here I put my code snippet. my ActionScript code: public class StockClient extends Sprite { private var hostName:String = "192.168.84.103"; private var port:uint = 55555; private var socket:XMLSocket; public function StockClient() { socket = new XMLSocket(); configureListeners(socket); socket.connect(hostName, port); } public function send(data:Object) : void{ socket.send(data); } private function configureListeners(dispatcher:IEventDispatcher):void { dispatcher.addEventListener(Event.CLOSE, closeHandler); dispatcher.addEventListener(Event.CONNECT, connectHandler); dispatcher.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler); dispatcher.addEventListener(ProgressEvent.PROGRESS, progressHandler); dispatcher.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler); dispatcher.addEventListener(ProgressEvent.SOCKET_DATA, dataHandler); } private function closeHandler(event:Event):void { trace("closeHandler: " + event); } private function connectHandler(event:Event):void { trace("connectHandler: " + event); //following testing message can be received, but client can't invoke data handler //send("<policy-file-request/>"); } private function dataHandler(event:ProgressEvent):void { //never fired trace("dataHandler: " + event); } private function ioErrorHandler(event:IOErrorEvent):void { trace("ioErrorHandler: " + event); } private function progressHandler(event:ProgressEvent):void { trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal); } private function securityErrorHandler(event:SecurityErrorEvent):void { trace("securityErrorHandler: " + event); } } my C# code: const int PORT_NUMBER = 55555; const String BEGIN_REQUEST = "begin"; const String END_REQUEST = "end"; const String POLICY_REQUEST = "<policy-file-request/>\u0000"; const String POLICY_FILE = "<?xml version=\"1.0\"?>\n" + "<!DOCTYPE cross-domain-policy SYSTEM \"http://www.adobe.com/xml/dtds/cross-domain-policy.dtd\">\n" + "<cross-domain-policy> \n" + " <allow-access-from domain=\"*\" to-ports=\"55555\"/> \n" + "</cross-domain-policy>\u0000"; ................ private void startListening() { provider = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); provider.Bind(new IPEndPoint(IPAddress.Parse("192.168.84.103"), PORT_NUMBER)); provider.Listen(10); isListened = true; while (isListened) { Socket socket = provider.Accept(); Console.WriteLine("connect!"); byte[] b = new byte[1024]; int receiveLength = 0; try { // code jump out at this statement receiveLength = socket.Receive(b); } catch (Exception e) { Debug.WriteLine(e.ToString()); } String request = System.Text.Encoding.UTF8.GetString(b, 0, receiveLength); Console.WriteLine("request:"+request); if (request == POLICY_REQUEST) { socket.Send(Encoding.UTF8.GetBytes(POLICY_FILE)); Console.WriteLine("response:" + POLICY_FILE); } else if (request == END_REQUEST) { Dispose(socket); } else { StartSocket(socket); break; } } } Sorry for the long code, please someone help with it, thanks a million

  Read the article

• Postfix dynamic smtp_helo_name

  - by William

  I have a mail server that relays e-mails for two different domains. I want the smtp_helo_name to be different based on the domain. I'm assuming there is no way to do this via checking the mail headers, so I was wondering if there was a way to do it by sending mail for one domain to one IP, and mail for the other to another. I tried modified master.cf to do this: localhost:smtp inet n - n - - smtpd ip1:smtp inet n - n - - smtpd ip2:smtp inet n - n - - smtpd -o myhostnamee=example2.com And setting smtp_helo_name to $myhostname in main.cf I also tried doing -o smtp_helo_name instead, neither work. Any suggestions would be great. Thanks

  Read the article

• Sendmail is refusing connection after configuring SMTP relay

  - by coder

  I'm setting up sendmail on my home computer to use with my webserver. I've set it to use my SMTP server provided by my hosting company. If I use the following command, it works sendmail -Am -t -v and then I enter the to and from emails. But if I try the following, it does not work. sendmail -v [email protected] < test.txt The TO email is the same as in the earlier command, but in this case I haven't specified a FROM e-mail, which I think is the problem. My guess is that it's sending the mail from user@localhost causing the smtp server to reject it. If so, how do I make it send from [email protected]?

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• Can't connect to exchange thru my smart phone

  - by Hoorayo

  We just moved Exchange server from our company to Local data center. Everything is working except mobile access. There is no problem with receiving and sending email from outlook of my laptop, but I can’t connect to exchange server from my smart phone to receive email. While I am setting up exchange account for my phone(Google) , it recognizes when I put wrong password. But it says “Unable to open connection to server” with right password and ID. Is there any option for IP address for this service when I move my server to different location? Please, help me out for any clue.

  Read the article

• How do I send an email with embedded images AND regular attachments in JavaMail?

  - by Chris

  Hi, I'd like to know how to build an SMTP multipart message in the correct order so that it will render correctly on the iPhone mail client (rendering correctly in GMail). I'm using Javamail to build up an email containing the following parts: A body part with content type "text/html; UTF-8" An embedded image attachment. A file attachment I am sending the mail via GMail SMTP (via SSL) and the mail is sent and rendered correctly using a GMail account, however, the mail does not render correctly on the iPhone mail client. On the iPhone mail client, the image is rendered before the "Before Image" text when it should be rendered afterwards. After the "Before Image" text there is an icon with a question mark (I assume it means it couldn't find the referenced CID). I'm not sure if this is a limitation of the iPhone mail client or a bug in my mail sending code (I strongly assume the latter). I think that perhaps the headers on my parts might by incorrect or perhaps I am providing the multiparts in the wrong order. I include the text of the received mail as output by gmail (which renders the file correc Message-ID: <[email protected]> Subject: =?UTF-8?Q?Test_from_=E3=82=AF=E3=83=AA=E3=82=B9?= MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_0_20870565.1274154021755" ------=_Part_0_20870565.1274154021755 Content-Type: application/octet-stream Content-Transfer-Encoding: base64 Content-ID: <20100518124021763_368238_0> iVBORw0K ----- TRIMMED FOR CONCISENESS 6p1VVy4alAAAAABJRU5ErkJggg== ------=_Part_0_20870565.1274154021755 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit <html><head><title>Employees Favourite Foods</title> <style> body { font: normal 8pt arial; } th { font: bold 8pt arial; white-space: nowrap; } td { font: normal 8pt arial; white-space: nowrap; } </style></head><body> Before Image<br><img src="cid:20100518124021763_368238_0"> After Image<br><table border="0"> <tr> <th colspan="4">Employees Favourite Foods</th> </tr> <tr> <th align="left">Name</th><th align="left">Age</th><th align="left">Tel.No</th><th align="left">Fav.Food</th> </tr> <tr style="background-color:#e0e0e0"> <td>Chris</td><td>34</td><td>555-123-4567</td><td>Pancakes</td> </tr> </table></body></html> ------=_Part_0_20870565.1274154021755 Content-Type: text/plain; charset=us-ascii; name=textfile.txt Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=textfile.txt This is a textfile with numbers counting from one to ten beneath this line: one two three four five six seven eight nine ten(no trailing carriage return) ------=_Part_0_20870565.1274154021755-- Even if you can't assist me with this, I would appreciate it if any members of the forum could forward me a (non-personal) mail that includes inline images (not external hyperlinked images though). I just need to find a working sample then I can move past this. Thanks, Chris.

  Read the article

• How good is PDF password protection?

  - by Tim

  It appears that Word's password protection is not really good, at least until Office 2003, if I read this SU entry correctly. I'm under the impression that Acrobat's PDF password protection should be better (it says 128-bit AES for Acrobat 7 and higher). Is that true? Of course, it depends on the strength of the password used, but assuming I protect my PDF with a password like sd8Jf+*e8fh§$fd8sHä, am I on the safe side? Like, say, for sending confidential patient information - not really valuable, but potentially highly sensitive.

  Read the article

• Send an Email at a future date

  - by Ryan

  I'd like to write up an email that gets sent out in a few days. I'd prefer to use Gmail, but I could use some other client if necessary. It doesn't look like Gmail has this feature in their labs anywhere, but it could just be hiding somewhere. Any ideas? EDIT: a bit more backstory on my particular situation. My wife is out of town for three weeks, and I've decided to email her every day while she's out. Unfortunately, I myself am going camping this weekend, so I wanted to pre-record a message that gets sent while I'm out. Unfortunately, FutureMail and FutureMe both are for sending email to yourself, probably for anti-spam reasons. I guess the best solution is to use thunderbird on my laptop (so it's shielded from power outages). Seems a little excessive to keep a computer running just to send a few emails, but whatever gets the job done :).

  Read the article

• ubuntu ssh does not connect

  - by bocca

  SSH won't be able to establish a connection to our server Here's the output of ssh -vvv: ssh -v -v -v 11.11.11.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 11.11.11.11 [11.11.11.11] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.1p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 133/256 debug2: bits set: 486/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '11.11.11.11' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug2: bits set: 497/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa ((nil)) debug2: key: /root/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug3: no such identity: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GTK_RC_FILES debug3: Ignored env WINDOWID debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env GNOME_KEYRING_SOCKET debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env DESKTOP_SESSION debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug3: Ignored env GNOME_KEYRING_PID debug1: Sending env LANG = en_CA.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env HISTCONTROL debug3: Ignored env SPEECHD_PORT debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_confirm: type 99 id 0 debug2: shell request accepted on channel 0

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• Windows 8.1 unable to play Music or the Audio from videos through Optical Out

  - by Zion Fox

  I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

  Read the article

• Issue with user having a gmail account and Google Apps account using same email/username

  - by Joshua

  Greetings! We have a user in our organization that had been using her email address at our domain at her username for gmail.com We recently moved our folks on to Google Apps, and have just moved our email server over to Google (IMAP/SMTP). I'm having all kinds of trouble only with this user's account with her sending and receiving email via the new Google mail server and wondering if it's because of her existing Gmail account. So her email address with us is [email protected], which is her login/user id with us on our Google Apps site. She still has her gmail identity tied to that same [email protected]. She's ok with deleting her old Gmail account...if I do so however will it goof things up for her going forward with us on the Google Apps site? Will she not be able to receive email? Thanks! Joshua

  Read the article

• Huge email sizes when using mail merge in Word 2010

  - by Nic

  So I've designed an HTML template to send out some emails on. The code is fine, everything looks great there, and it tests just fantastically. I was sending out putting my recipients in the BCC field, but I decided to make it a little more personal and open the file in Word and do an email merge. The HTML file itself is 3.06kb and contains an img src to an absolute URL, which is about 125kb (a little large, I know, but it's very important). When I merge the file from Word 2010 - Outlook 2010, the email size jumps to about 250kb. It's not much, I know, but I'm a gigantic nerd and I'm stuck thinking it should be about 5kb with MIME overhead. Here's the file list on one of the test emails: File Size image001.png 104366 image002.gif 43 MESSAGE 1259 Mime.822 152575 TEXT.htm 5712 Since the img src is specified, I'm not sure why these are coming through. If this is an issue inherent to Outlook, I'd be happy to explore other options.

  Read the article

• Myvidoop error when trying to log in

  - by paul-werner.mp

  Recently I have not been able to get into my myvidoop username. It won't even bring up the pictures and asks to send the access code to one of my email addresses. I have seen this message before and there was no error previously but now it will not send the access code. I've tried accessing the site through firefox and through IE but I get the same thing (whether I went through the add on to get to the site or just typed in the website). I just want to know if I possibly have something that could be blocking it from sending this out. I use the free version of Avira for protection, run Ad Muncher (but I've also tried to get this access code with Ad Muncher closed), and have Ad Block Pro plugin (but like I've said before, the same thing happens in IE). I know it uses Java to send this access code out and I've even updated Java but still cannot get it to send it to me.

  Read the article

• Send individual e-mails to each contact in Gmail?

  - by Robert C. Cartaino

  I'm trying to send an e-mail to a group of contacts in Gmail (200 recipients, no spam). Is there a way to force Gmail to send the e-mail as 200 individual e-mails, each addressed to that specific person in the list? But I'm trying to protect their privacy: Sending to a contact group puts all their e-mail addresses in the To: field. Adding their addresses to the cc: field means everyone can see all the addresses. Adding their addresses to the bcc: field means that no one sees their address (not even their own) in the to: field. That looks odd and seems like that would trigger a lot of spam filters. So how can I force Gmail to send the e-mail addressed specifically to each contact in the list?

  Read the article

• Auto-responder rule in Outlook 2010 produces double signature (but only to certain emails)

  - by Austin ''Danger'' Powers

  I have set up an auto-responder in Outlook 2010 using a custom template, as a staff member will be on vacation for 6 weeks. It works perfectly, apart from the fact certain people receive two signatures at the bottom of the message instead of one. When reviewing the "sent" folder, there is no sign of double signatures. In the custom template, there is only 1 copy of the signature. Signatures are set to be applied automatically to new messages or replies- however, if I remove the signature from the template, then it seems no one receives a response with the signature. People sending from Hotmail accounts do not receive a duplicate signature. Gmail users do see a duplicate signature. Does anyone have any idea what could be causing this?

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >