Search Results

Search found 21501 results on 861 pages for 'slow connection'.

Page 93/861 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Slow network interaction between 2 kvm host machines

    - by VirtualNoob
    We have 2 physical machines, Host1 is a CentOS 6.4 kvm host and hosts ~7 kvm VMs all running Ubuntu 12.04 - all of this runs perfectly. Recently we've added a 2nd host system, host2, again a CentOS 6.4 kvm host with a view to running another couple of VMs and providing some failover against host1 should it be required. Both physical machines reside in the same cabinet in our DC, and are on the same subnet - let's say host1: 1.1.1.64 and host2: 1.1.1.81. Both have their gateway set to the DC gateway of 1.1.1.254 with no hardware firewall in between. On each machine, I have 4 NICs that are bonded together to form a single interface, which is then bridged to allow the VMs to access the network. All of the VMs are online, and all of them can successfully ssh into the hosts without any delay. Both systems can access the internet fine, and I can ssh into both systems from home without any issues. However, there is a real delay when attempting to ssh from host1 to host2 (or vice versa) and this obviously means that any action required on host2, that is controlled by host1 either takes forever or results in failure due to timeout. In the interest of keeping this post short, I've put my ifcfg files into a pastie: http://pastie.org/8081648 I've tried both adding a firewall rule in each machine for the other, and also disabling the firewall entirely, so that can't be the issue. I've tried troubleshooting this myself but can't seem to get to the bottom of it. Any help or advice would be appreciated. Thanks in advance.

    Read the article

  • Slow Crash with Filter Manager

    - by Alex N.
    I have been having sporadic freezes on my machine lately. There is no blue screen or crash screen. All the applications just stop responding and ~5~10 minutes later it will power off. After checking the event log a couple times, I have found that the same event occurs right before each crash. File System Filter 'Avgmfx64' (6.1, ?2011?-?12?-?23T08:08:12.000000000Z) has successfully loaded and registered with Filter Manager. My question is twofold: I can not seem to find any information on what the Filter Manager actually is supposed to do. for curiosities sake, what is it? And more importantly, how do I fix this problem. From the research I have done, I see that similar problems can be caused by out of date drivers, so I have already taken the time to update all of my drivers, run MemTest, and verify the drive integrity.

    Read the article

  • How do I connect to SDF on a Mobile device from desktop application?

    - by pitprog
    C# WinForms .Net 3.5 to SQL CE 3.5 on Mobile 6.1 Device I'd like to make a connection from a desktop application to a SDF database on my Windows Mobile device while it's connected via ActiveSync. Visual Studio lets me create a Data Connection to my device. The connections tests OK and I can view the data in the database using Visual Studio. I then create a form and try to fill a DataGridView. When I run the program I get an error that the path to the data base is not valid. How am I supposed to specify the Mobile device path in the connection string? In my App.Config, I've tried variations on the path, but none of them work: connectionString="Data Source=Mobile Device\Program Files\SqlCeViaActiveSync\Orders.sdf" connectionString="Data Source=\Mobile Device\Program Files\SqlCeViaActiveSync\Orders.sdf" connectionString="Data Source=Program Files\SqlCeViaActiveSync\Orders.sdf" connectionString="Data Source=\Program Files\SqlCeViaActiveSync\Orders.sdf" The full connection string section looks like this: <connectionStrings> <add name="SqlCeViaActiveSync.Properties.Settings.OrdersConnectionString" connectionString="Data Source=Mobile Device\Program Files\SqlCeViaActiveSync\Orders.sdf" providerName="Microsoft.SqlServerCe.Client.3.5" /> </connectionStrings> Also, I did make a reference to Microsoft.SqlServerCe.Client, as I found a few articles that mentioned it was necessary. Can anyone point me to some recent articles/samples or let me know what I'm doing wrong? Thanks!

    Read the article

  • How to set up hibernate to use Glassfish connection pool?

    - by jschoen
    I have set up a connection pool in Glassfish with a jndi resource for it also setup. I am stumped on how to configure hibernate to go get it. I have come across alot of write ups to configure it to use C3P0 connection pool. Well I am lost. I found that I need to set: hibernate.connection.datasource hibernate.jndi.url hibernate.jndi.class hibernate.connection.username hibernate.connection.password Would datasource be the same as the hibernate.connection.datasource set in the connection pool? What would hibernate.jndi.class be? Are hibernate.connection.username and hibernate.connection.password for the connection to the database or to the appserver? I assume this is to the database, but why do I need them since that is all set in the appserver?

    Read the article

  • PHP script keeps doing mmap/munmap

    - by Aurélien Momow
    Hello, My PHP script contains a loop, which does nothing much more than echoing and dereferencing pointers (like in $tab[$othertab[$i]]- stuff). It was working great until yesterday, when this script starting being VERY slow (like 50 times slower than before). After using strace, i figured out that 90% of the time, the script does mmap/munmap. Here is a random portion of the strace log : mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 munmap(0x7fac0156c000, 266240) = 0 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0156c000 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac0152b000 mmap(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fac014ea000 Here is the result of the strace -c command : % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 82.77 0.004092 0 13542 mmap 9.69 0.000479 0 3642 write 7.54 0.000373 0 13541 munmap 0.00 0.000000 0 100 read 0.00 0.000000 0 88 poll 0.00 0.000000 0 25 4 access ------ ----------- ----------- --------- --------- ---------------- 100.00 0.004944 30938 4 total Here is the php script : function affAnnonce($tabAnnonces, $isDoublon = 0) { GLOBAL $db, $base, $tabDomaine, $doublon, $traduction, $tab_contrat, $tab_emploi, $tab_categ, $tab_metier, $tab_region, $tab_departement, $tab_secteur, $tab_experience, $calc_all, $tabLangues, $tabLanguesNiveau, $tabNoAffAnnonce, $tabHisto; foreach($tabAnnonces AS $tmp) { if (in_array($tmp['id'], $tabNoAffAnnonce) === true) { continue; } $value->host = "../"; foreach($tabDomaine AS $domaine => $valeur) { if ($domaine == $tmp['domaine']) { $value->host = $valeur->host; break; } } // Ordre // secteur;metier;contrat;emploi;region;langues;domaine $tabPushModif = array(); if ($tmp['push_preview'] != '') { $tabPushModif = explode(';', $tmp['push_preview']); $tabPushModif['secteur'] = $tabPushModif[0]; $tabPushModif['metier'] = $tabPushModif[1]; $tabPushModif['contrat'] = $tabPushModif[2]; $tabPushModif['id_emploi'] = $tabPushModif[3]; $tabPushModif['regions'] = $tabPushModif[4]; $tabPushModif['langues'] = $tabPushModif[5]; $tabPushModif['domaine'] = $tabPushModif[6]; } $infoSoc = get_nom_societe($tmp['id_societe']); $number = ($tmp['nb_preview_push'] != '' ? $tmp['nb_preview_push'] : '&nbsp;'); $secteurs = explode ("/", $tmp[secteur]); $sector = ""; $count_sect = count($secteurs); for ($k = 0; $k < $count_sect; $k++) { if ($secteurs[$k] != '') { $sector .= $tab_secteur[$secteurs[$k]].'/'; } } $tmp['poste'] = apresinsertion($tmp['poste']); $tmp['metier'] = $tab_metier[$tmp['metier']]; $tmp['region'] = $tab_region[$tmp['region']]; $tmp['departement'] = $tab_departement[$tmp['departement']]; $tmp['secteur'] = $sector; $tmp['id_contrat'] = $tmp['contrat']; $tmp['contrat'] = $tab_contrat[$tmp['contrat']]; $tmp['emploi'] = $tab_emploi[$tmp['id_emploi']]; $tmp['categorie'] = $tab_categ[$tmp['categorie']]; echo '<tr id="'.($isDoublon ? 'dbl_' : '').$tmp['id'].'"><td align="center" class="tdFirst nowrap dbl_'.$tmp['id'].'" id="aff_'.$tmp['id'].'"'; switch($tmp['affiche']) { case '0': echo ' bgcolor=#DBB7FF'; break; default : ; } echo '><a href=?op=annonces&search4='.$tmp[id].' target=_new>'.$tmp[id].'</a><br />'; echo '<a href="'.$value->host.'" target="blank">'.strtoupper($tmp['domaine']).'<br /><img src="../images/flags/'.$tmp['domaine'].'.png" border=0 align=middle></a>'; echo '</TD><TD align=center class=tdNext'; if ($tmp['filtre'] == 1) echo ' bgcolor=#FF0000'; echo '>'; if ($isDoublon) echo '<a id="'.$tmp['id'].'" class="doublon" href="#">DOUBLON</a> - '; if (($tmp[id_reponse] == 1) || ($tmp[id_reponse] == 2) || ($tmp[id_reponse] == 4) || ($tmp[id_reponse] == 5)) echo '<a href="javascript:voir_annonce(\''.$tmp['id'].'\', \''.$value->host.'\')" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'.$tmp['poste'].'</a>'; if ($tmp[id_reponse] == 3) echo '<a href="javascript:voir_annonce3(\''.$tmp['url_reponse'].'\')" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'.$tmp['poste'].'</a>'; if ($tmp['urgent'] == 1) print " - <font class=r_bold>urgent</font>"; if ($tmp['gold'] == 1) print " - <font class=g_bold>gold</font>"; if ($tmp['cvtheque'] == 1) print " - CVthèque"; if ($tmp['url_reponse'] != '' && $tmp['id_reponse'] != 3) { echo '<br /><br />URL - '; $len = strlen($tmp['url_reponse']); if ($len > 50) { $link = substr($tmp['url_reponse'], 0, 47).'...'; } else { $link = $tmp['url_reponse']; } echo '<a href="'.$tmp['url_reponse'].'" style="color: #666;" target="_blank">'.$link.'</a>'; } // Début du div ou sera placé l'annonce echo '<br /><div id="preview_'.$tmp['id'].'" name="preview_'.$tmp['id'].'" class="tdStyle1" style="z-index: 1000; display: none; position: fixed; left: 0px; top: 0px; padding: 4px; border: 1px solid #666; background: #fff; text-align: left; width: 777px;" onMouseOver="showPreview('.$tmp['id'].');" onMouseOut="hidePreview('.$tmp['id'].');">'; $tmp["url"] = substr($tmp["url"], 7); $id_modele = getIdModeleByAnnonce($tmp['id_societe'], $tmp["id"], $tmp['domaine']); $tmp["poste"] = mb_strtoupper($tmp["poste"]); $isFnh = isFnhAnnonce($tmp['id']); $logo = ""; if ($isFnh) { $logo_jpg = getFnhLogo(); $logo = "<img align='center' border='0' src='".$logo_jpg."' />"; } else { if ($id_modele > 0) { if ($tmp['id_reponse'] == 1) { $logo_gif = "../fichiers/societes/".$tmp['id_societe']."/".$id_modele.".gif"; if (file_exists($logo_gif)) { $logo = "<img align=center border=0 src=".$logo_gif.">"; } } else { $rep = "../fichiers/societes/".$tmp['id_societe']."/".$id_modele; $logo_jpg = $rep.".jpg"; $logo_swf = $rep.".swf"; $logo_gif = $rep.".gif"; if (file_exists($logo_jpg)) { $logo = "<img align=center border=0 src=".$logo_jpg.">"; } elseif (file_exists($logo_swf)) $logo = '<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="120" height="600"> <param name=movie value="'.$logo_swf.'"> <param name=quality value=high> <embed src="'.$logo_swf.'" quality=high pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="120" height="600"></embed> </object>'; elseif (file_exists($logo_gif)) { $logo = "<img align=center border=0 src=".$logo_gif.">"; } } } } if (strlen($logo) > 0 && strlen($tmp['url']) > 0) $logo = "<a href=http://".$tmp['url']." target=_blank>".$logo."</a>"; if (strlen($tmp['url_reponse']) <= 0) { $tmp['url_reponse'] = "../jobs/repondre_annonce.php?id=".$tmp['id']."\" onClick=\""; if ($tmp['contact_email'] == "") $tmp['url_reponse'] .= "alert('".$traduction->aff_word("repondre_courrier", $tabTrad['only_word']).'\n'.$tmp['societe'].'\n'.str_replace("<br />", '\n', ereg_replace("[\r\n\t]", "", $tmp['adresse']))."');"; else $tmp['url_reponse'] .= "popUp(this.href, 'scroll', 540, 400);"; $tmp['url_reponse'] .= "return false;"; } ?> <table width="775" cellspacing="0" cellpadding="0" border=0> <? if ($tmp['id_reponse'] != "2") { ?> <tr> <td width="575" align=center valign=top> <table width="535" border=0 cellspacing=0 cellpadding=2> <tr> <td colspan="2" class="nom_societe"><?=$tmp['societe']?></td> </tr> <tr> <td colspan="2"><hr size=1 color=#000000></td> </tr> <tr> <td colspan="2" align="right"><?=date_2fr($tmp["date_affichage"], 1)?></td> </tr> <tr> <td align="right" class=bold><?=$traduction->aff_word("pays")?>&nbsp;:</td> <td align="left"><?=$tmp['pays0']?></td> </tr> <? if ($tmp['region']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("region")?>&nbsp;:</td> <td align="left"><?=$tmp['region']?></td> </tr> <? } if ($tmp['departement']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("departement")?>&nbsp;:</td> <td align="left"><?=$tmp['departement']?></td> </tr> <? } if ($tmp['ville']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("ville")?>&nbsp;:</td> <td align="left"><?=$tmp['ville']?></td> </tr> <? } if ($tmp['debut']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("debut_travail")?>&nbsp;:</td> <td align="left"><?=$tmp['debut']?></td> </tr> <? } ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("type_contrat")?>&nbsp;:</td> <td align="left"><?=$tmp['contrat']?></td> </tr> <? if ($tmp['emploi']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("type_emploi")?>&nbsp;:</td> <td align="left"><?=$tmp['emploi']?></td> </tr> <? } if ($tmp['salaire']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("salaire")?>&nbsp;:</td> <td align="left"><?=$tmp['salaire']?></td> </tr> <? } if ($tmp['experience']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("experience_metier")?>&nbsp;:</td> <td align="left"><?=$tab_experience[$tmp['experience']]?></td> </tr> <? } if ($tmp['reference']) { ?> <tr> <td align="right" class=bold><?=$traduction->aff_word("reference")?>&nbsp;:</td> <td align="left"><?=$tmp['reference']?></td> </tr> <? } ?> <tr> <td>&nbsp;</td> <td><hr size=1 color=#000000 width=405></td> </tr> <? if ($tmp['presentation']) { ?> <tr> <td valign=top align="right" class=bold><?=$traduction->aff_word("presentation")?>&nbsp;:</td> <td style="text-align: justify;"><?=$tmp['presentation']?></td> </tr> <tr> <td>&nbsp;</td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } ?> <tr> <td valign="top" class=bold align="right"><?=$traduction->aff_word("poste")?>&nbsp;:</td> <td valign="top" class=titre_poste align=center><?=$tmp['poste']?></td> </tr> <tr> <td colspan=2>&nbsp;</td> </tr> <tr> <td valign="top" class=bold align="right"><?=$traduction->aff_word("description")?>&nbsp;:</td> <td style="text-align: justify;"><?=$tmp['description']?></td> </tr> <tr> <td width=100%>&nbsp;</td> <td width=405><hr size=1 color=#000000 width=405></td> </tr> <? if ($tmp['profil']) { ?> <tr> <td valign="top" align="right" class=bold><?=$traduction->aff_word("profil")?>&nbsp;:</td> <td valign="top" style="text-align: justify;"><?=$tmp['profil']?></td> </tr> <tr> <td>&nbsp;</td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } if ($tmp['recommandation']) { ?> <tr> <td valign="top" align="left"></td> <td valign="top" style="text-align: justify;"><?=$tmp['recommandation']?></td> </tr> <tr> <td>&nbsp;</td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } if ($tmp['contact_nom'] || $tmp['contact_prenom']) { ?> <tr> <td valign="top" align="right" class=bold><?=$traduction->aff_word("contact")?>&nbsp;:</td> <td valign="top" align="left"><?=$tmp['contact_prenom']?>&nbsp;<?=$tmp['contact_nom']?></td> </tr> <tr> <td>&nbsp;</td> <td><hr size=1 color=#000000 width=405></td> </tr> <? } ?> <? } elseif ($tmp['domaine'] != 'de') { ?> <tr> <td colspan=2><table width="755" align=right valign=top><tr><td><?=$tmp['presentation']?></td></tr></table></td> </tr> <? } ?> <tr> <td rowspan=6>&nbsp;</td> <td><a href="<?=$tmp['url_reponse']?>" target="_blank">&gt;&gt;&nbsp;<?=$traduction->aff_word("repondre_en_ligne")?></a></td> </tr> <tr> <td><a href="../jobs/affiche_imprime_annonce.php?id=<?=$tmp['id']?>" onClick="popUp(this.href, 'scroll', 540, 400);return false;" target="_blank">&gt;&gt;&nbsp;<?=$traduction->aff_word("version_imprimer")?></a></td> </tr> <tr> <td><a href="../jobs/send_friend_annonce.php?id=<?=$tmp['id']?>" onClick="popUp(this.href, 'clean', 400, 300);return false;" target="_blank">&gt;&gt;&nbsp;<?=$traduction->aff_word("envoi_ami")?></a></td> </tr> <tr> <td><a href="./affiche_liste.php?soc=<?=$tmp['societe_clean']?>">&gt;&gt;&nbsp;<?=$traduction->aff_word("toutes_offres")?> <?=$tmp['societe']?></a></td> </tr> <tr> <td><a href="../jobs/index.php">&gt;&gt;&nbsp;<?=$traduction->aff_word("nouvelle_recherche")?></a></td> </tr> <tr> <td><a href="../jobs/index.php" onClick="javascript:retour(); return false;">&lt;&lt;&nbsp;<?=$traduction->aff_word("retour")?></a></td> </tr> <? if ($tmp['id_reponse'] != "2") { ?> </table> </td> <td width="200" align=center class=black_bord valign=top> <table width="190" cellspacing=0 cellpadding=0 border=0> <tr> <td colspan="2" align="center" valign="top" class=bold><? if ($tmp['id_reponse'] != "5") { ?><br><? } ?><?=$logo?><br><br><?=$tmp['societe']?></td> </tr> <? if ($tmp['adresse']) { ?> <tr> <td align="center" colspan=2><?=$tmp['adresse']?></td> </tr> <tr> <td colspan=2>&nbsp;</td> </tr> <? } if ($tmp['contact_tel']) { ?> <tr> <td class=bold align=right><?=$traduction->aff_word("tel")?> :</td> <td align=center><?=$tmp['contact_tel']?></td> </tr> <? } if ($tmp['contact_fax']) { ?> <tr> <td class=bold align=right><?=$traduction->aff_word("fax")?> :</td> <td align=center><?=$tmp['contact_fax']?></td> </tr> <? } if ($tmp['url']) { ?> <tr> <td colspan=2 align=center><a href="http://<?=$tmp['url']?>" target="_blank"><?=$tmp['url']?></a></td> </tr> <? } ?> </table> </td> </tr> <? } ?> </table> <? echo '</div>'; // Fin du div ou sera placé l'annonce echo "</TD><TD align=center class=tdNext><b>".date_2fr($tmp['date_creation'], 1)."</b><br>".date_2fr($tmp['date_affichage'], 1); echo "</TD><TD align=center class=tdNext>".$tmp[societe]."<br>(<i><a href=".$value->host."login/login.php?login=".$infoSoc->email."&pass=".$infoSoc->password." target=_blank>".$infoSoc->nom."</a></i>)<br><a href=index.php?op=entreprise&ac=tableau_bord&id_societe=".$tmp['id_societe'].">compte</a></TD>"; $color = ''; switch($tmp[push_mail]) { case "0": $color = " bgcolor=#DBB7FF"; break; case "2": $color = " bgcolor=#CCCCCC"; break; default : ; } $type_rep = ""; switch ($tmp[id_reponse]) { case 1: $type_rep = "Standard"; break; case 2: $type_rep = "Chartée"; break; case 3: $type_rep = "Metamoteur"; break; case 4: $type_rep = "Reponse sur site"; break; case 5: $type_rep = "Semi-chartée"; break; } print " <td align=center class=tdNext> <table width=100% border=0 cellspacing=0 cellpadding=0> <tr> <td align=center class=cadreBas>".$tmp['contrat']." - ".$tmp['emploi']."</td> <td $color align=center rowspan=4 width=40%> <a onclick=\"javascript:colorannonce(this, '#CFFFCF');\" href=?op=agentalertes&action=modify_push&amp;id_annonce=".$tmp[id]." target=_blank>Modifier push</a><br><br> <a onclick=\"sendPush(this, ".$tmp['id']."); return false;\" href=\"#\">Envoyer Push</a> </td> </tr> <tr> <td align=center class=cadreBas>".(strlen($tmp['metier']) > 0 ? $tmp['metier'] : '<font class=gris_i>'.$tmp['categorie'].'</font>')."</td> </tr> <tr> <td align=center class=cadreBas>".$tmp[secteur]."</td> </tr> <tr> <td align=center>".($number < 500 ? '<font color="red">' : ($number > 1500 ? '<font color="orange">' : '<font color="green">')).$number."</font></td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% border=0 cellspacing=0 cellpadding=0> <tr> <td align=center class=cadreBas>"; if (strlen($tabPushModif['regions']) > 0) { $tab = explode('/', $tabPushModif['regions']); foreach($tab AS $elem) { if (strlen($elem) <= 0) continue; if (strpos($elem, 'dep-') !== false) { echo $tab_departement[substr($elem, 4)]; $query_tmp = 'SELECT region FROM ref_departement WHERE id = "'.substr($elem, 4).'"'; $obj = $db->getObj($query_tmp); if ($obj) { echo ' - '.$tab_region[$obj->region]; $query_tmp = 'SELECT rp.code_pays FROM ref_pays rp INNER JOIN ref_region rr ON rr.pays = rp.id WHERE rr.id = "'.$obj->region.'"'; $obj = $db->getObj($query_tmp); if ($obj) echo ' ('.$obj->code_pays.')'; } } elseif (is_numeric($elem) === false) { echo '<font class=gris_i>'.$tmp['departement'].' - '.$tmp['region'].'</font> ('.$elem.')'; } else { echo '<font class=gris_i>'.$tmp['departement'].'</font> - '.$tab_region[$elem]; $query_tmp = 'SELECT rp.code_pays FROM ref_pays rp INNER JOIN ref_region rr ON rr.pays = rp.id WHERE rr.id = "'.$obj->region.'"'; $obj = $db->getObj($query_tmp); if ($obj) echo ' ('.$obj->code_pays.')'; } } } else echo $tmp['departement']." - ".$tmp['region']." (".$tmp['code_pays'].")"; echo "</td> </tr> <tr> <td align=center class=cadreBas>".$tmp[ville]."</td> </tr> <tr> <td align=center class=cadreBas>"; if (strlen($tabPushModif['metier']) > 0) { $tmpExp = array(); $tab = explode('/', $tabPushModif['metier']); foreach($tab AS $elem) { if (strlen($elem) <= 0) continue; $tmpMetier = explode('-', $elem); if (isset($tmpMetier[1])) { if (in_array($tmpMetier[1], $tmpExp) === true) continue; $tmpExp[] = $tmpMetier[1]; if ($tmpMetier[1] == $tmp['experience']) echo '<b>'.$tab_experience[$tmpMetier[1]].'</b>/'; else echo $tab_experience[$tmpMetier[1]].'/'; } } if (count($tmpExp) <= 0) echo '<font class=gris_i>'.$tab_experience[$tmp['experience']].'</font>'; } else echo $tab_experience[$tmp['experience']]; echo "</td> </tr> <tr> <td align=center>".$tabLangues[$tmp['id_langue']]->langue." - ".$tabLanguesNiveau[$tmp['id_langue_niveau']]->langue_niveau."</td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% cellspacing=0 cellpadding=0 border=0> <tr> <td align=center class=cadreBas>$type_rep</td> </tr> <tr> <td align=center>".$tmp[compteur_vu]."&nbsp;/&nbsp;<a href=?op=gcand&ac=liste&id_annonce=".$tmp[id]."&statut=all target=_new>".$tmp[compteur_repondu]."</a></td> </tr> </table> </td> <td align=center class=tdNext> <table width=100% cellspacing=0 cellpadding=0 border=0> <tr> <td align=center class=cadreBas><a href=?op=annonces&ac=modifier&id_annonce=".$tmp['id']." target=_new>Modifier</a></td> </tr> <tr> <td align=center class=cadreBas><a href='' onClick=\"valid_delete('".$tmp['id']."'); return false;\">Supprimer</a></td> </tr> <tr> <td align=center><a href='' onClick='changeAff(".$tmp['id']."); return false;' id='changeAff_".$tmp['id']."'>".($tmp['affiche'] == 1 ? 'Mettre hors ligne' : 'Mettre en ligne')."</a></td> </tr> </table> </td> <td align=center class='tdNext gris'> <p style=\"color:#444;\"> &nbsp;".nl2br($tmp['push_res']).'</p>'; if (is_array($tabHisto[$tmp['id']])) { echo '<p style="color:#888; padding-top:5px;">'; foreach($tabHisto[$tmp['id']] as $histo) { echo $histo['type_modif'].' '.HumanDateTime($histo['date']).' par '.$histo['user']; if ($histo['new_annonce']) { echo ' [New ID : <a href="index.php?op=annonces&search4='.$histo['new_annonce'].'">'.$histo['new_annonce'].'</a>]'; } echo '<br />'; } echo '</p>'; } echo " </td> <td align=center>&nbsp;".$tmp['source']; if (!empty($tmp['source_ref'])) { echo '<br /><a href="redirect.php?site='.$tmp['source_ref'].'" target="_blank">Voir original</a>'; } echo '</td></tr>'; if (isset($doublon) && !$isDoublon) { $query2 = " SELECT a.*, rp.pays0, rp.code_pays FROM annonces a INNER JOIN ref_pays rp ON rp.id = a.pays WHERE a.id_societe = '".$tmp['id_societe']."' AND a.contrat = '".$tmp['id_contrat']."' AND a.domaine = '".$tmp['domaine']."' AND a.id != '".$tmp['id']."' AND ADDDATE(a.date_creation, INTERVAL 2 MONTH) > '".$tmp['date_creation']."' AND a.poste = \"".addslashes($tmp['poste'])."\" AND a.ville = \"".addslashes($tmp['ville'])."\" AND a.societe = \"".addslashes($tmp['societe'])."\" AND (a.id_societe != 1 OR (a.id_societe = 1 AND a.contact_email = \"".$tab_annonce['contact_email']."\")) ORDER BY a.id DESC"; $tabAnnonces2 = $db->getTab($query2); if (count($tabAnnonces2) > 0) { $tabId = array(); foreach($tabAnnonces2 as $annonc) { $tabId[] = $annonc['id']; } $tmpListAnnonceTab = annoncelist::getHistorique($tabId); $tmpTabHisto = createTabHisto($tmpListAnnonceTab); $tabHisto += $tmpTabHisto; //Additionne les 2 tableaux, contrairement à array_merge il garde les clés !! affAnnonce($tabAnnonces2, 1); foreach($tabAnnonces2 AS $tmpAnn) $tabNoAffAnnonce[] = $tmpAnn['id']; } } } } ?> Only this script is slow, all the others on the same server/domain/directory work great. On an other server, the same script works fine. The script takes up to 90% of CPU when running. Any ideas?

    Read the article

  • How to sett up hibernate to use Glassfish connection pool?

    - by jschoen
    I have set up a connection pool in Glassfish with a jndi resource for it also setup. I am stumped on how to configure hibernate to go get it. I have come across alot of write ups to configure it to use C3P0 connection pool. Well I am lost. I found that I need to set: hibernate.connection.datasource hibernate.jndi.url hibernate.jndi.class hibernate.connection.username hibernate.connection.password Would datasource be the same as the hibernate.connection.datasource set in the connection pool? What would hibernate.jndi.class be? Are hibernate.connection.username and hibernate.connection.password for the connection to the database or to the appserver? I assume this is to the database, but why do I need them since that is all set in the appserver?

    Read the article

  • How can I speed up Subversion checkins? (Using ANKH, latest, Visual Studio 2010)

    - by Timothy Khouri
    I've started working on a new web project with some friends... we are using the latest Subversion server (installed last week), the latest version of ANKH. My web project is a whapping 1.5 megabytes (that's with all images, css files, dll's after compiling, pdb files... etc). Checking in even super small changes (literally adding the letter "x" to a few files for testing)... takes FOREVER! (about 10 seconds - I almost killed myself). The ANKH client is measuring in BYTES PER SECOND ... BYTES? per second... I must be doing something wrong. Does anyone what config file has a joke totallyMessWithPeople=true so that I can turn that off or something? Oh, also, changing one "big" file of a super 10k gains speed up to nearly the speed of light (which is apparently 857 bytes per second). Help me obi wan kenobi, your my only hope! EDIT: As a note... my real work project that uses Visual Source Safe 2005 (I know, ouch) uploads files at about 200-500kbps from this very same computer/internet connection.

    Read the article

  • hibernate c3p0 broken pipe

    - by raven_arkadon
    Hi, I'm using hibernate 3 with c3p0 for a program which constantly extracts data from some source and writes it to a database. Now the problem is, that the database might become unavailable for some reasons (in the simplest case: i simply shut it down). If anything is about to be written to the database there should not be any exception - the query should wait for all eternity until the database becomes available again. If I'm not mistaken this is one of the things the connection pool could do for me: if there is a problem with the db, just retry to connect - in the worst case for infinity. But instead i get a broken pipe exception, sometimes followed by connection refused and then the exception is passed to my own code, which shouldn't happen. Even if I catch the exception, how could i cleanly reinitialize hibernate again? (So far without c3p0 i simply built the session factory again, but i wouldn't be surprised if that could leak connections (or is it ok to do so?)). The database is Virtuoso open source edition. My hibernate.xml.cfg c3p0 config: <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="hibernate.c3p0.breakAfterAcquireFailure">false</property> <property name="hibernate.c3p0.acquireRetryAttempts">-1</property> <property name="hibernate.c3p0.acquireRetryDelay">30000</property> <property name="hibernate.c3p0.automaticTestTable">my_test_table</property> <property name="hibernate.c3p0.initialPoolSize">3</property> <property name="hibernate.c3p0.minPoolSize">3</property> <property name="hibernate.c3p0.maxPoolSize">10</property> btw: The test table is created and i get tons of debug output- so it seems it actually reads the config.

    Read the article

  • Connecting to database on web host in Visual Studio

    - by Anders Svensson
    I have a web site developed locally with a local Sql Server database. I also have a web host that provides one Sql Server database for my site. Now I want to deploy the application, and I would like to be able to manage the remote database from the Server Explorer in Visual Studio. I have the connection string used in the application, which works fine for adding, say, a datasource to a control etc. But I don't know if there's any way to use it to connect the database inside the Server Explorer so that I can add tables etc. I have read that you're supposed to be able to this instead of using the Sql Server Management Studio, but I have'nt read anything about how to connect to the remote database in it. What I have tried so far is this: I have selected Add database in Server Explorer. This brings up first a dialog where I choose Sql Server. And then I get a dialog where I can set Server name (which I tried using the ip address in the connection string below), and Authentication (where I chose Sql Server Authentication, with the user id and password from below). But when I test the connection it fails. Here's the connection string, which works fine when used for datasources in the application (obviously with different user name and password): Any help appreciated!

    Read the article

  • IIS6, ASP.NET MVC 1 and random slowdowns

    - by Mr Snuffle
    I've recently deployed a MVC application to an IIS6 web server. One strange behaviour I've been having is the load times will randomly blow up to 30sec+ and then return to normal. Our tests have shown this occurring on multiple connections at the same time. Once the wait has passed, the site become responsive again. It's completely random when this will occur, but will probably happen about once every 15 minutes or so. My first thought was the application was being restarted by the web server for some reason, but I determined this wasn't the case because the process recycling is set very infrequently, and I placed some logging in the application startup. It's also nothing to do with the database connection. This slowdown happens simply by moving between static pages too. I've watched the database with a SQL profiler, and nothing is hitting it when these slowdowns occur. Finally, I've placed entry and exit logging on my controller actions, the slowdown always happens outside of the controller. The entry and exit time for a controller action is always appropriately fast. Does anyone have any ideas of what could be causing this? I've tried running it locally on IIS7 and I haven't had the issue. I can only think it's something to do with our hosting provider.

    Read the article

  • Can I make TCP/IP session to run less than 60 seconds?

    - by Pavel
    Our server is overloaded with TCP/IP sessions, we have 1200 - 1500 of them. Most of them are hanging in TIME_OUT state. It turns out that a connection in TIME_OUT state occupies a socket until 60 second time-out is elapsed. The problem is that the server gets unresponsive and many clients are not getting served. I have made a simple test: download an XML file from the server with Internet Explorer 8.0 The download finishes in a fraction of second. But then I see that the TCP/IP connection is hanging in TIME_OUT state for 60 seconds. Is there any way to get rid of TIME_OUT waiting or make it less to free the socket for new connections? I understand why TCP/IP connection enters TIME_OUT state, but I don't understand why Internet Explorer does not close the connection after the XML file download is over. The details. Our server runs web service written in Perl (mod-perl). The service provides weather data to clients. Client is a Flash appication (actually Flash ActiveX control embedded in Windows application). Apache "Keep Alive" option is set to 0

    Read the article

  • Login Problem Windows Authentication

    - by user109280
    Duplicate of: http://stackoverflow.com/questions/881928/windows-authentication-trusted-connection-problem I logged in the Windows Server(Machine 1) as "abc\user1 ". Windows Server machine is in abc domain. MSSQL Server is in the "abc" domain on Machine 1 and have mixed mode.authentication. It has account "abc\user1 " and "abc\user2 ". Both has role of sysadmin and serveradmin. I logged in another machine(Machine 2) using "abc\user2 ". Same Domain. Run the ant which connect to MSSQL Server. URL is formed as follows. jdbc:sqlserver://%DB_IP%:%DB_PORT%;SelectMethod=cursor;integratedSecurity=true;DatabaseName=dbname; 1) From Machine 2, If I use "abc\user2" credential for connection, then it works fine. since integratedSecurity=true. 2) From Machine 2, If I use "abc\user1" credential for connection, then it doesn't fine, since integratedSecurity=true and take System Credentials i.e "abc\user2". Even if I make integratedSecurity=false , then also it doesn't connect using "abc\user1" What changes to URL I have make to work for "abc\user1" from Machine2 for connection. what properties to be added in url? OR Driver doesn't support to use another domain\User Credentials? What need to set on MSSQL Server ?? Deepak

    Read the article

  • Slow Client connection blocks Mongrel

    - by Sanjay
    I have a Apache + Haproxy + Mongrel setup for my rails application. When I hit a particular server page, mongrel takes around 100ms to process the request and I get the page in around 5 secs due to data transmission time on my slow home connection. Now I see that during these 5 secs of data transmission, mongrel does not serve any other request. I am surprised as that means mongrel is serving the response html to the client and is blocked till the client receives it. Shouldn't serving response be the job of Apache? This puts serious bottleneck in the no of requests Mongrel can serve as that would depend on the speed of the client connection. Is there any way that html generated by mongrel is served by apache/haproxy or any other web server like nginx? I wonder how the other high traffic sites are managing it?

    Read the article

  • No operations allowed after statement closed issue

    - by Washu
    I have the next methods in my singleton to execute the JDBC connections public void openDB() throws ClassNotFoundException, IllegalAccessException, InstantiationException, SQLException { Class.forName("com.mysql.jdbc.Driver").newInstance(); String url = "jdbc:mysql://localhost/mbpe_peru";//mydb conn = DriverManager.getConnection(url, "root", "admin"); st = conn.createStatement(); } public void sendQuery(String query) throws SQLException { st.executeUpdate(query); } public void closeDB() throws SQLException { st.close(); conn.close(); } And I'm having a problem in a void where i have to call this twice. private void jButton1ActionPerformed(ActionEvent evt) { Main.getInstance().openDB(); Main.getInstance().sendQuery("call insertEntry('"+EntryID()+"','"+SupplierID()+"');"); Main.getInstance().closeDB(); Main.getInstance().openDB(); for(int i=0;i<dataBox.length;i++){ Main.getInstance().sendQuery("call insertCount('"+EntryID()+"','"+SupplierID()+"','"+BoxID()+"'); Main.getInstance().closeDB(); } } I have already tried to keep the connection open and send the 2 querys and after that closed and it didnt work... The only way it worked was to not use the methods, declare the commands for the connection and use different variables for the connection and the statement. I thought that if i close the Connecion and the Statement I could use the variable once again since is a method but I'm not able to. Is there any way to solve this using my methods for the JDBC connection?

    Read the article

  • Intermittent Connection Issues to SQL Server 2008 R2 RTM

    - by Chandan Jha
    The problem I am facing is a very complex one and inspite of trying to gather a root cause of the problem, I am standing at the same place after 2 months with just bits and pieces of information.Here is a scenario: There is a windows 2003 server which uses an system DSN ODBC connection. I looked into the driver properties and it is as follows: Name Version File SQL Server 2000.86.3959.00 SQLSRV32.DLL Now, this system DSN has been given configured with TCP\IP in Network Libraries and 'determine port dynamically' is checked. Now, lets come to the database destination. It is hosted on Windows 2008 having SQL 2008 R2 RTM version 64-bit. Now, I will give you a an overview about the events that happen and whatever troubleshooting I could perform: I get an email saying 'blah blah' failed and the only message their application gets is 'cannot connect to database' I go the SQL Server logs and find the following information: Login failed for user ''. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. [CLIENT: 10.0.0.xx Error: 18456, Severity: 14, State: 58.] A quick search shows that this error may come when an SQL Server is configured with windows authentication but its not true. We have mixed mode and connection issue is intermittent. This SQL Server is configured to run on a local system account but since we use only SQL Server accounts to connect to this, there should not be any Kerberos errors. When I run a profiler trace and see only 'existing connections', i see a lot of them coming from my client server displaying the sql user but NO hostname is shown. Textdata field shows TCP\IP information along with some arithabort and ansi-null settings. Now, I tried looking into ring connectivity buffer by using following: SELECTCAST(record AS XML) FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = 'RING_BUFFER_CONNECTIVITY' One sample output is: <ConnectivityTraceRecord> <RecordType>Error</RecordType> <RecordSource>Tds</RecordSource> <Spid>118</Spid> <SniConnectionId>5124905D-D1EC-460E-AD78-201050B78C67</SniConnectionId> <OSError>0</OSError> <SniConsumerError>18452</SniConsumerError> <SniProvider>7</SniProvider> <State>1</State> <RemoteHost>10.0.0.21</RemoteHost> <RemotePort>5008</RemotePort> <LocalHost>10.1.0.38</LocalHost> <LocalPort>1433</LocalPort> <RecordTime>6/6/2012 21:14:57.527</RecordTime> <TdsBuffersInformation> <TdsInputBufferError>0</TdsInputBufferError> <TdsOutputBufferError>0</TdsOutputBufferError> <TdsInputBufferBytes>120</TdsInputBufferBytes> </TdsBuffersInformation> <TdsDisconnectFlags> <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled> <DisconnectDueToReadError>0</DisconnectDueToReadError> <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream> <ErrorFoundBeforeLogin>0</ErrorFoundBeforeLogin> <SessionIsKilled>0</SessionIsKilled> <NormalDisconnect>0</NormalDisconnect> </TdsDisconnectFlags> </ConnectivityTraceRecord> <Stack> <frame id="0">0X000000000174C34B</frame> <frame id="1">0X0000000001748FDD</frame> <frame id="2">0X0000000002461001</frame> <frame id="3">0X0000000000C47E98</frame> <frame id="4">0X00000000008015AD</frame> <frame id="5">0X0000000000801492</frame> <frame id="6">0X00000000003CBBD8</frame> <frame id="7">0X00000000003CB8BA</frame> <frame id="8">0X00000000003CB6FF</frame> <frame id="9">0X00000000008E8FB6</frame> <frame id="10">0X00000000008E9175</frame> <frame id="11">0X00000000008E9839</frame> <frame id="12">0X00000000008E9502</frame> <frame id="13">0X0000000074E437D7</frame> <frame id="14">0X0000000074E43894</frame> <frame id="15">0X00000000775A652D</frame> Somehow all the errors show error number 18452 whereas I never found this error in my SQL logs where I see only 18456. I am just stuck on a dead end because this connection issue appears intermittently. Sorry for a long question but I hope if you read this, you can make out that I tried a lot at my end before giving up.

    Read the article

  • How to access programs in one PC using another PC

    - by darkstar13
    Hi, I was recently given an old PC for my remote access at work. The CPU that comes with it has Windows XP installed, 400+ MB of ram, all USB devices disabled. I access my work applications using VPN / Citrix. Basically, it' sooooo slow. Plus it's bulky and it will just occupy space, so I am now hoping to find a way for me to integrate this work PC with my home PC. I tried to put in the hard drive in my home PC CPU, and set the drive as slave. However, when I booted my PC from this hard drive, I am stuck at the screen where windows is prompting me to select how am I going to boot (ex. Safe Mode, Safe mode with command prompt, Last Working Configuration, etc), but whatever option I select, I am still stuck at this option after reboot. I am thinking if maybe I can clone the drive and mount the cloned drive and access the system as a virtual machine. But I don't know if that will work. I would like to know if there's something I can do so I can work at home using my home PC, where I can access my work programs to connect to VPN / Citrix. My home PC's OS is Windows 7 Ultimate x64.

    Read the article

  • data transfer rate anomaly (internet)

    - by Nrew
    I tested my internet speed at speedtest.net. And go the result. .42Mbps Download and .21 Upload rate. My classmate got the same download speed of .42Mbps but has .87Mbps upload rate. Does upload rate affect the transfer rate?Because even though we got the same download speed. His transfer rate is about 100kbps downloading a movie from a torrent. And mine is only about 47kbps. Also the same torrent. And even direct download its always 47kbps. Is it possible to tweak something in order to have higher transfer rates. Other details: Were also both using the same ISP. The same slow ISP. And it seems that he's getting the most out of his connection even if his plan is lower than mine. I just don't know why I'm a loser at this. And when I try to complain to the ISP. They say that I'm getting the minimum speed and its okay. That really sucks. And I'm not using any router, so is he. The computer is directly connected to the internet using the modem provided by the ISP.

    Read the article

  • suddenly can't connect to router

    - by Khoi
    I was just downloading some stuff in ubuntu and snap, the connection cut and I can't even connect to my router. And the router, it still works fine, my laptop can connect wirelessly to it as usual. But my main computer (which connects to it directly through cable) can't even ping it. Here is my ipconfig: Windows IP Configuration Host Name . . . . . . . . . . . . : vento Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physical Address. . . . . . . . . : 00-19-DB-4E-6C-56 Ethernet adapter {15B1F740-2F35-4FE4-9FEE-4052AFBAD096}: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Anchorfree HSS Adapter - Packet Sche duler Miniport Physical Address. . . . . . . . . : 00-FF-15-B1-F7-40

    Read the article

  • Tomcat6 can't connect to MySql (The driver has not received any packets from the server)

    - by Tobias Wiesenthal
    Hi all, i'm running an Apache Tomcat 6.0.20 / MySQL 5.1.37-lubuntu / sun-java6-jdk /sun-java6-jre / sun-java6-bin on my local machine using Ubuntu 9.10 as OS. I'm trying to get a simple DB-query example running for 2 days now, but i still get this Exception: org.apache.jasper.JasperException: javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:522) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:398) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) root cause javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:862) org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:791) org.apache.jsp.index_jsp._jspService(index_jsp.java:104) org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) root cause javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:285) org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:168) org.apache.jsp.index_jsp._jspx_meth_sql_005fquery_005f0(index_jsp.java:274) org.apache.jsp.index_jsp._jspx_meth_c_005fotherwise_005f0(index_jsp.java:216) org.apache.jsp.index_jsp._jspx_meth_c_005fchoose_005f0(index_jsp.java:130) org.apache.jsp.index_jsp._jspService(index_jsp.java:93) org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) my web.xml looks like this : <?xml version="1.0" encoding="utf-8"?> <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5"> <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/testDB</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> </web-app> the context.xml looks like this : <?xml version="1.0" encoding="UTF-8"?> <Context path="/my1stApp" docBase="/var/www/jsp/my1stApp" debug="5" reloadable="true" crossContext="true"> <Resource name="jdbc/testDB" auth="Container" type="javax.sql.DataSource" maxActive="5" maxIdle="5" maxWait="10000" username="user" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/some"/> </Context> and the jsp file looks like this: <%@ page contentType="text/html" %> <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %> <%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %> <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %> <html> <head> <title>DroneLootTool</title> </head> <body bgcolor="white"> <sql:query var="res" dataSource="jdbc/testDB"> select name, othername from mytable </sql:query> <h2>Results</h2> <c:forEach var="row" items="${res.rows}"> Name ${row.name}<br/> MoreName ${row.othername}<br/><br/> </c:forEach> </body> </html> read lots of forum entries / tried lots of different settings (always changed back to original settings when it didnt' work) set TOMCAT6_SECURITY=no in /etc/default/tomcat6 because TOMCAT6_SECURITY=yes was causing trouble too the skip-networking flag is not set for the DB (BIND 127.0.0.1 is set) firewall is swiched off (sudo ufw disable) MySQL works (tested several times with user used in this skript) telnet localhost 3306 says Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. The TestConnection.java produced the following output: me@my-laptop:~/Desktop$ java -classpath '/usr/share/java/mysql.jar:./' TestConnection com.mysql.jdbc.Driver jdbc:mysql://localhost:3306/testDB myuser mypassword com.mysql.jdbc.CommunicationsException: Communications link failure Last packet sent to the server was 0 ms ago. at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1070) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2103) at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:718) at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:298) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:282) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) at TestConnection.checkConnection(TestConnection.java:40) at TestConnection.main(TestConnection.java:21) Caused by: com.mysql.jdbc.CommunicationsException: Communications link failure Last packet sent to the server was 0 ms ago. at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1070) at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:666) at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:1069) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2031) ... 7 more Caused by: java.io.EOFException: Can not read response from server. Expected to read 4 bytes, read 0 bytes before connection was unexpectedly lost. at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:2431) at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:590) ... 9 more Connection failed. i don't know if there is a difference between the way the java driver connects to the DB and the Perl DBI module does, but this PERL skript works #!/usr/bin/perl -w use CGI; use DBI; use strict; print CGI::header(); my $dbh = DBI->connect("dbi:mysql:some:localhost", "user", "password"); my $sSql = "SELECT * from mytable"; my $ppl = $dbh->selectall_arrayref( $sSql ); foreach my $pl (@$ppl) { my @array = @$pl; print @array; } $dbh->disconnect; enabled --log-warnings on the mysql, but i didn't get any new warnings. When i was searching the logs for warnings i found this messages when i restart the tomcat, don't know if it helps to find the problem : Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.startup.HostConfig checkResources#012INFO: Undeploying context [/myapp] Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.loader.WebappClassLoader clearReferencesThreads#012SCHWERWIEGEND: A web application appears to have started a thread named [MySQL Statement Cancellation Timer] but has failed to stop it. This is very likely to create a memory leak. Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.startup.HostConfig deployDescriptor#012INFO: Deploying configuration descriptor myapp.xml

    Read the article

  • Easiest Way To Implement "Slow Motion" and variable game speed in XNA?

    - by TerryB
    I have an XNA 4.0 game that I want to be able to switch into slow motion and back again to full speed every now and then. So if you kill an enemy the game switches into slow motion as they explode and then goes back to normal. What is the easiest way to do this in XNA 4.0 without having to alter all my existing code that relies on GameTime? I have some code that relies on the TotalGameTime, which will be wrong unless I get XNA to slow down. Is there anyway to avoid refactoring that code? Thanks!

    Read the article

  • Slow loading jQuery Autocomplete

    - by Andrew G. Johnson
    Hi I am building an internal app for my company using jQuery's autocomplete and am finding it tends to start off very slow. My assumption is that the bottle neck is perhaps adding its elements to the DOM since after the first query it seems to be substantially speedier. Does anyone know of a way to pre-load these elements on page load instead of doing it for the first time when the user starts typing?

    Read the article

  • OTRS slow performance main queue listing

    - by mrml
    we have the problem of a very slow queue listing. If there are more than 15 tickets in a single queue it takes up to 4-5 seconds for creating the view. This problems occure since we're using OTRS 3.1 We are running OTRS 3.1.4 with the KIX4OTRS extension on a virtualized Ubuntu 10.04 LTS. We tried yet: known performance tweaks provided in the manuals. creating extra database indexes installation on physical machines (no positive effects) with Ubuntu 12.04 / 12.04.1 Any ideas?

    Read the article

  • slow Database connection

    - by ratty
    i am working with Windows Applications in c# with MySQL database using wamp server. i have very slow connection when executing the project.what is problem in it and how can i solve this?

    Read the article

  • SetPassword is very slow

    - by bja
    Hi We are experiencing a performance problem when communicating with the active directory using System.DirectoryServices. DirectoryEntry.Invoke("SetPassword", new object[] { password }) sometimes takes 15 seconds. The Service that makes the call is running on the same machine. What could make it that slow? Cheers, bja

    Read the article

  • Is Ruby on Rails slow with medium traffic?

    - by IHawk
    Hello ! I made some searches on Google, and I read some posts, articles and benchmarks about Ruby on Rails being slow and I am planning to build one website that will have a good amount of users inserting data and there will be some applications to process this data (maybe in Ruby, you can help me choosing the language). What is the real performance of Ruby on Rails with large traffic ? Thank you !

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >