Search Results

Search found 2796 results on 112 pages for 'switching desktops'.

Page 93/112 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• A story of Murphy&ndash;my technical issues at TechDays Switzerland #chtd

  - by Laurent Bugnion

  I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Convert old AVI files to a modern format

  - by iWerner

  Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Ubuntu keyboard shortcuts - two-part question

  - by Don

  Background: I come from a Windows background and just started dual-booting Ubuntu (my first Linux experience) about 4 days ago. So my systems are Windows 7/Ubuntu 12.04, and so far I'm loving Ubuntu. I am a dedicated mouse-abolitionist (trackpads are hell) and do most of my browsing and navigation with keyboard shortcuts. However, on switching to Ubuntu, a lot of my keyboard shortcuts are gone, and my productivity has resultantly taken a huge hit anytime I am using Ubuntu. Problem 1: My computer was designed to display on-screen notifications for a second when I hit caps-lock or num-lock, and there are no constant indicators of the lock status (LEDs, etc). In Ubuntu, the keys still worked, but the notifications were gone. Googling got me a tutorial on key-binding(Compiz) and scripts, so now I have capslock and numlock running this script: #!/bin/bash icon="/usr/share/icons/gnome/scalable/devices/keyboard.svg" case $1 in 'scrl') mask=3 key="Scroll" ;; 'num') mask=2 key="Num" ;; 'caps') mask=1 key="Caps" ;; esac value=$(xset q | grep "LED mask" | sed -r "s/.*LED mask:\s+[0-9a-fA-F]+([0-9a-fA-F]).*/\1/") if [ $(( 0x$value & 0x$mask )) == $mask ] then output="$key Lock" output2="On" else output="$key Lock" output2="Off" fi notify-send -i $icon "$output" "$output2" -t 1000 But, whether turning it off or on, the notifications always say that I have turned it on. Is there an easy fix for this, or an easier way to work it to get it do display the CORRECT notifications? Problem 2: I'm not sure if this is because of my keyboard or Ubuntu. In Windows, I use Chrome and use the ctrl+pgUp/pgDwn shortcuts quite a bit to switch between tabs. On my keyboard, I can enter pgUp and pgDwn by either disabling NumLock and hitting 9 or 3 respectively on the 10key. Alternately I can hold the fn key and hit up or down arrow. The first method is the one I very heavily relied upon, and it works in Firefox for Ubuntu, but not in Chrome nor in Chromium. The second method (ctrl + fn + up/down) works fine in Chrome. However, I'd dearly like to find a method to make the first method work. Any suggestions? Thanks in advance for your help. Update: @julien: I've checked the keyboard layout options - I didn't find anything that seemed useful for this goal. @Marty: The script runs once when the button is pressed. In Compiz, I've tied those two keys to the script, so when I press the button, it runs the script with the button pressed as a parameter. Update: @elmicha: Thanks. That one works a lot better, and it even pops an icon into the status bar when caps lock is on. There's still a very slight problem in that if I quickly tap the key twice, the image will show that it has been turned on and then turned off, and the notifaction will come and go from my status area, but the text of both notifications will be "Caps Lock on". Same with Num Lock. However, if the time between presses is long enough for the first notification to disappear, everything displays correctly. Given how quickly the notifications disappear, I don't expect this will pose too much of a problem for me.

  Read the article

• Roles / Profiles / Perspectives in NetBeans IDE 7.1

  - by Geertjan

  With a check out of main-silver from yesterday, I'm able to use the brand new "role" attribute in @TopComponent.Registration, as you can see below, in the bit in bold: @ConvertAsProperties(dtd = "-//org.role.demo.ui//Admin//EN", autostore = false) @TopComponent.Description(preferredID = "AdminTopComponent", //iconBase="SET/PATH/TO/ICON/HERE", persistenceType = TopComponent.PERSISTENCE_ALWAYS) @TopComponent.Registration(mode = "editor", openAtStartup = true, role="admin") public final class AdminTopComponent extends TopComponent { And here's a window for general users of the application, with the "role" attribute set to "user": @ConvertAsProperties(dtd = "-//org.role.demo.ui//User//EN", autostore = false) @TopComponent.Description(preferredID = "UserTopComponent", //iconBase="SET/PATH/TO/ICON/HERE", persistenceType = TopComponent.PERSISTENCE_ALWAYS) @TopComponent.Registration(mode = "explorer", openAtStartup = true, role="user") public final class UserTopComponent extends TopComponent { So, I have two windows. One is assigned to the "admin" role, the other to the "user" role. In the "ModuleInstall" class, I add a "WindowSystemListener" and set "user" as the application's role: public class Installer extends ModuleInstall implements WindowSystemListener { @Override public void restored() { WindowManager.getDefault().addWindowSystemListener(this); } @Override public void beforeLoad(WindowSystemEvent event) { WindowManager.getDefault().setRole("user"); WindowManager.getDefault().removeWindowSystemListener(this); } @Override public void afterLoad(WindowSystemEvent event) { } @Override public void beforeSave(WindowSystemEvent event) { } @Override public void afterSave(WindowSystemEvent event) { } } So, when the application starts, the "UserTopComponent" is shown, not the "AdminTopComponent". Next, I have two Actions, for switching between the two roles, as shown below: @ActionID(category = "Window", id = "org.role.demo.ui.SwitchToAdminAction") @ActionRegistration(displayName = "#CTL_SwitchToAdminAction") @ActionReferences({ @ActionReference(path = "Menu/Window", position = 250) }) @Messages("CTL_SwitchToAdminAction=Switch To Admin") public final class SwitchToAdminAction extends AbstractAction { @Override public void actionPerformed(ActionEvent e) { WindowManager.getDefault().setRole("admin"); } @Override public boolean isEnabled() { return !WindowManager.getDefault().getRole().equals("admin"); } } @ActionID(category = "Window", id = "org.role.demo.ui.SwitchToUserAction") @ActionRegistration(displayName = "#CTL_SwitchToUserAction") @ActionReferences({ @ActionReference(path = "Menu/Window", position = 250) }) @Messages("CTL_SwitchToUserAction=Switch To User") public final class SwitchToUserAction extends AbstractAction { @Override public void actionPerformed(ActionEvent e) { WindowManager.getDefault().setRole("user"); } @Override public boolean isEnabled() { return !WindowManager.getDefault().getRole().equals("user"); } } When I select one of the above actions, the role changes, and the other window is shown. I could, of course, add a Login dialog to the "SwitchToAdminAction", so that authentication is required in order to switch to the "admin" role. Now, let's say I am now in the "user" role. So, the "UserTopComponent" shown above is now opened. I decide to also open another window, the Properties window, as below... ...and, when I am in the "admin" role, when the "AdminTopComponent" is open, I decide to also open the Output window, as below... Now, when I switch from one role to the other, the additional window/s I opened will also be opened, together with the explicit members of the currently selected role. And, the main window position and size are also persisted across roles. When I look in the "build" folder of my project in development, I see two different Windows2Local folders, one per role, automatically created by the fact that there is something to be persisted for a particular role, e.g., when a switch to a different role is done: And, with that, we now clearly have roles/profiles/perspectives in NetBeans Platform applications from NetBeans Platform 7.1 onwards.

  Read the article

• Cannot Mount USB 3.0 Hard Disk ?!!

  - by Tenken

  Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

  Read the article

• Getting FEATURE_LEVEL_9_3 to work in DX11

  - by Dominic

  Currently I'm going through some tutorials and learning DX11 on a DX10 machine (though I just ordered a new DX11 compatible computer) by means of setting the D3D_FEATURE_LEVEL_ setting to 10_0 and switching the vertex and pixel shader versions in D3DX11CompileFromFile to "vs_4_0" and "ps_4_0" respectively. This works fine as I'm not using any DX11-only features yet. I'd like to make it compatible with DX9.0c, which naively I thought I could do by changing the feature level setting to 9_3 or something and taking the vertex/pixel shader versions down to 3 or 2. However, no matter what I change the vertex/pixel shader versions to, it always fails when I try to call D3DX11CompileFromFile to compile the vertex/pixel shader files when I have D3D_FEATURE_LEVEL_9_3 enabled. Maybe this is due to the the vertex/pixel shader files themselves being incompatible for the lower vertex/pixel shader versions, but I'm not expert enough to say. My shader files are listed below: Vertex shader: cbuffer MatrixBuffer { matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; }; struct VertexInputType { float4 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; PixelInputType LightVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the texture coordinates for the pixel shader. output.tex = input.tex; // Calculate the normal vector against the world matrix only. output.normal = mul(input.normal, (float3x3)worldMatrix); // Normalize the normal vector. output.normal = normalize(output.normal); return output; } Pixel Shader: Texture2D shaderTexture; SamplerState SampleType; cbuffer LightBuffer { float4 ambientColor; float4 diffuseColor; float3 lightDirection; float padding; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; float4 LightPixelShader(PixelInputType input) : SV_TARGET { float4 textureColor; float3 lightDir; float lightIntensity; float4 color; // Sample the pixel color from the texture using the sampler at this texture coordinate location. textureColor = shaderTexture.Sample(SampleType, input.tex); // Set the default output color to the ambient light value for all pixels. color = ambientColor; // Invert the light direction for calculations. lightDir = -lightDirection; // Calculate the amount of light on this pixel. lightIntensity = saturate(dot(input.normal, lightDir)); if(lightIntensity > 0.0f) { // Determine the final diffuse color based on the diffuse color and the amount of light intensity. color += (diffuseColor * lightIntensity); } // Saturate the final light color. color = saturate(color); // Multiply the texture pixel and the final diffuse color to get the final pixel color result. color = color * textureColor; return color; }

  Read the article

• Bounding Box Collision Glitching Problem (Pygame)

  - by Ericson Willians

  So far the "Bounding Box" method is the only one that I know. It's efficient enough to deal with simple games. Nevertheless, the game I'm developing is not that simple anymore and for that reason, I've made a simplified example of the problem. (It's worth noticing that I don't have rotating sprites on my game or anything like that. After showing the code, I'll explain better). Here's the whole code: from pygame import * DONE = False screen = display.set_mode((1024,768)) class Thing(): def __init__(self,x,y,w,h,s,c): self.x = x self.y = y self.w = w self.h = h self.s = s self.sur = Surface((64,48)) draw.rect(self.sur,c,(self.x,self.y,w,h),1) self.sur.fill(c) def draw(self): screen.blit(self.sur,(self.x,self.y)) def move(self,x): if key.get_pressed()[K_w] or key.get_pressed()[K_UP]: if x == 1: self.y -= self.s else: self.y += self.s if key.get_pressed()[K_s] or key.get_pressed()[K_DOWN]: if x == 1: self.y += self.s else: self.y -= self.s if key.get_pressed()[K_a] or key.get_pressed()[K_LEFT]: if x == 1: self.x -= self.s else: self.x += self.s if key.get_pressed()[K_d] or key.get_pressed()[K_RIGHT]: if x == 1: self.x += self.s else: self.x -= self.s def warp(self): if self.y < -48: self.y = 768 if self.y > 768 + 48: self.y = 0 if self.x < -64: self.x = 1024 + 64 if self.x > 1024 + 64: self.x = -64 r1 = Thing(0,0,64,48,1,(0,255,0)) r2 = Thing(6*64,6*48,64,48,1,(255,0,0)) while not DONE: screen.fill((0,0,0)) r2.draw() r1.draw() # If not intersecting, then moves, else, it moves in the opposite direction. if not ((((r1.x + r1.w) > (r2.x - r1.s)) and (r1.x < ((r2.x + r2.w) + r1.s))) and (((r1.y + r1.h) > (r2.y - r1.s)) and (r1.y < ((r2.y + r2.h) + r1.s)))): r1.move(1) else: r1.move(0) r1.warp() if key.get_pressed()[K_ESCAPE]: DONE = True for ev in event.get(): if ev.type == QUIT: DONE = True display.update() quit() The problem: In my actual game, the grid is fixed and each tile has 64 by 48 pixels. I know how to deal with collision perfectly if I moved by that size. Nevertheless, obviously, the player moves really fast. In the example, the collision is detected pretty well (Just as I see in many examples throughout the internet). The problem is that if I put the player to move WHEN IS NOT intersecting, then, when it touches the obstacle, it does not move anymore. Giving that problem, I began switching the directions, but then, when it touches and I press the opposite key, it "glitches through". My actual game has many walls, and the player will touch them many times, and I can't afford letting the player go through them. The code-problem illustrated: When the player goes towards the wall (Fine). When the player goes towards the wall and press the opposite direction. (It glitches through). Here is the logic I've designed before implementing it: I don't know any other method, and I really just want to have walls fixed in a grid, but move by 1 or 2 or 3 pixels (Slowly) and have perfect collision without glitching-possibilities. What do you suggest?

  Read the article

• I.T. Chargeback : Core to Cloud Computing

  - by Anand Akela

  Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

  Read the article

• How to restore/change Alt+Tab behaviour/ram usage and a few other things after Ubuntu upgrade from 11.04 to 11.10?

  - by fiktor

  I use Ubuntu for programming. I recently updated it from 11.04 to 11.10. There are some things I don't like in the new version of Unity desktop interface. I don't actually know if it is hard to restore previous behavior or not, and if it is not, where should I look to do that. I know a bit of programming, but I really don't know much about Linux settings. I used to have 3-6 terminal windows and switch between them with Alt+Tab and Shift+Alt+Tab. I liked half-transparent terminal windows, since with them I could open web-page with some instruction in Firefox, press Alt+Tab and type commands in a console window, being able to recognize text on a web-page under it. Now I have problems with my usual work-style because of the following. List of "negative" changes Alt+Tab shows just one icon for all console windows. When I wait some time, it, however, shows all windows, but I don't like to wait. I prefer to remember order of windows and press Alt+Tab as many times as I need to switch to the right window. Alt+Shift+Tab to switch in reverse order doesn't work now. Console windows are not transparent any more. When I don't wait, and switch to this icon, it shows all console windows altogether. So even if they were transparent, I wouldn't be able to see anything below them (I can read something only from the window, which is directly under current one, not a few levels under). When I run a few console windows in Unity I had 740Mb used on Ubuntu 11.04, but I have 1050Mb now. The question is how to make it back to 750-. I really need my memory, since I use my computer to work with 1512Mb of data and I try to save every 10Mb possible (if it doesn't take too much of machine and, more importantly, my time). When I press "The Super key" I have a field to type the name of the program I want to run. But now it sometimes shows this field, but when I'm trying to type nothing happens. Probably, focus is not on the right field. I don't really mean to restore exactly the same behavior, but I want to make my work in Ubuntu 11.10 efficient (at least as efficient as in Ubuntu 11.04). I would be happy if there are some ways to accomplish that. What have I tried I have installed CompizConfig Settings Manager. I have read this question. However enabling "Static Application Switcher" makes Alt+Tab crazy: after enabling it It says about key-binding conflicts with "Ubuntu Unity Plugin"; "Alt+Tab" switching doesn't change, but "Shift+Alt+Tab" now works and shows all windows; Memory usage increases. I have tried turning off Ubuntu Unity Plugin, but this doesn't seem right thing to do, since it seems to turn off all menus, a lot of keystrokes and app-launcher, which usually activates with "The Super key". I have found, that window transparency can be enabled by "Opacity, Brightness and Saturation" plugin from Accessibility. However I don't know if enabling it is the right thing to do (at least it increases memory usage). Update: everything solved but #3: see my own answer below. I have made a separate question about issue #3 (transparency).

  Read the article

• IBM Server Config questions

  - by Joel Coel

  I have a few questions on a potential server setup. First, the situation: Last year we bought an IBM x3500 server with 2 Xeon E5410's, 9GB RAM, 6 HDDs. The original intent for this server was to replace the old exchange e-mail server. It was brought in, set up, and then shortly after we switched to gmail. Shortly after that my predecessor left for greener pastures, and finally I was hired. So this nice server is now sitting (mostly) idle. This year I have budget again for one server, and of course I want to put this other server to work. I'm thinking about the best use for the two server, and I think I finally have a plan for what I want to do with them. The idea is to use the two newer servers as a pair of VM hosts. I will set up each server with the same 8 VMs, but divide up the load so that only 4 are active per physical host. That means I've normally got 2GB RAM + 2 cores per host. I've done some load testing to pick out what servers to convert to virtual, and chose them so that each host will be capable of handling the entire set of 8 by itself in a pinch with 1 core and 1GB RAM, but would be very taxed to do so. This should take our data center from 13 total servers down to 7. The "servers" I'm replacing are mostly re-purposed desktops, so I'm more than happy to be able to do this. Now it's time to go shopping for the new server. I'd like my two hosts to match as closely as possible, and so I'm looking at IBM again. It also helps that we have some educational matching grant money from IBM that I need to use to help pay for this system (we're a small private college). So finally, (if you're not bored already), we come to my questions: Am I missing anything big or obvious in this plan? I'm a little worried about network performance since the VM hosts will only have 4 nics total where 8 used to be, but I don't think it will be a problem. Is there anything else like this I might be overlooking? Am I making it even too complicated? IBM no longer has a good analog to last year's server. If I want to match the performance (8 cores, 9GB RAM, 1333mhz front side bus, 6 spindles), I have to spend quite a bit more than we paid last year: $2K+, or nearly a 33% cost increase. This only brings a marginal increase in performance. The alternative to stay in budget is to take a hit on the fsb down to 800mhz or cut the number of cores in half, neither of which is attractive. The main cost culprit is the processor. IBM no longer offers the E5410. It's listed as a part, but not available in any of the server configs I've looked at. I'm considering getting the cheapest 800mhz fsb dual core xeon I can configure and then buying the E5410's separately. That's still an extra $350 I wasn't counting on, but that's better than $2K. I want to know what others think of this - will it work or will I end up with the wrong motherboard or some other issue? Am I missing a simple way to configure the server I really want? I don't really intend to do this, but one option to save some money back is to omit the redundant power supply. Since my redundancy plan for these system is to switch over to a completely different host, the extra power isn't fully necessary. That said, it's still very helpful to avoid even short downtimes while I switch over VMs. Has anyone done this?

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• Windows 7 disk errors after a few hours of runtime

  - by GFK

  I'm having trouble understanding what is going on with my work PC. Whenever I boot it, it runs fine for a while, then starts to randomly show disk errors. The displayed error often contains the message "not enough storage is available to process this command", although depending on the application that fails it can be different. This has happened for weeks now and is getting worse. This is what troubles me: It never seems to impact critical parts of the system (no BSOD, no freeze). Only some applications seem impacted, refusing to function correctly after a while: Outlook 2010 cannot download RSS feeds anymore, Firefox 6 or IE9 cannot download anything bigger than 3MB without failing, Windows Update fails, all msi installers fail, Visual Studio 2010 starts failing in weird manners... It only happens after a while using it (typically 3 hours, but it seems that installing a program or compiling several times makes it shorter) Rebooting solves it (temporarily). The system: The OS is Windows 7 Pro Spanish SP1, 32 bits The system is an HP Compaq 6000 Pro with 4 GB memory (only 3.4GB usable since the system is 32bit), one 500GB hard drive. Installed applications include: Visual Studio 2010, SQL Server 2008 R2, VMWare Workstation 7, Microsoft Security Essentials, Office 2010. Shutting down all related services and processes doesn't seem to change anything. The diagnostics I've run so far: Hard drive : 465GB, 165GB free Process Explorer : physical and virtual memory seem ok (pagefile is 5.3GB, physical memory usage 70%, system commit 39%) Windows Memory diagnostic tool: OK CHKDSK returned: 488282111 KB total disk space. 281668248 KB in 265779 files. 150188 KB in 62949 indexes. 0 KB in bad sectors. 571755 KB in use by the system. The log file has occupied 65536 kilobytes. 205891920 KB available on disk. For non-spanish speakers, that means all ok. SMART diagnostic tools (DiskCheckup) report all values normal. temperatures are in the normal range (HWinfo). The event viewer doesn't seem to contain any significant message. ran CCleaner 3, without any noticeable effect. I was thinking about some file number limit (between Visual Studio projects and other applications, there are around 300.000 files on the hard drive), but I couldn't find any. It's possible there is something related with the use of the temporary folders (it's the only explanation I have for why applications fail but Windows doesn't), but I cannot confirm that. Only thing I cannot find out is if chkdsk reporting 65MB for the log is normal. It seems since Vista it always reports this. Any other cleaning/diagnostic tool you might know of? Edit: I ran several other tools since I first published the question: Seagate SeaTools (the HD manufacturer's analysis tool): complete test run OK. Intel Rapid 10.1 (the HD controller manufacturer's troubleshooting tool): the HD's ok. Microsoft Desktop Heap Monitor: Desktop Heap Information Monitor Tool (Version 8.1.2925.0) Copyright (c) Microsoft Corporation. All rights reserved. Session ID: 1 Total Desktop: ( 46464 KB - 11 desktops) WinStation\Desktop Heap Size(KB) Used Rate(%) WinSta0\Winlogon (s1) 128 3.6 WinSta0\Disconnect (s1) 64 3.8 WinSta0\Default (s1) 20480 3.0 msswindowstation\mssrestricteddesk (s0) 1024 0.2 __X78B95_89_IW__A8D9S1_42_ID (s0) 1024 0.2 Service-0x0-3e5$\Default (s0) 1024 0.6 Service-0x0-3e4$\Default (s0) 1024 0.3 Service-0x0-3e7$\Default (s0) 1024 2.1 WinSta0\Winlogon (s0) 128 1.9 WinSta0\Disconnect (s0) 64 3.8 WinSta0\Default (s0) 20480 0.0 All ok, desktop heap usage < 5% Edit 2: I tried totally resetting my account by creating a new one, logging under this new one and delete the first one (local rights and files), then logging back with this deleted account (it is a domain account). No luck. Also, I found out often the error is "not enough storage is available to process this command". Searching on the internet, I found an old troubleshooting tip (setting a registry key to raise the IRP stack limit, whatever it is) which did not change anything.

  Read the article

• Network update solutions for a company of ~20 (5 local, 15 remote)?

  - by Margaret

  Hi all This is probably going to be a bit up in the air, because we're still in the "reaching towards solutions" phase, but I figured I'd see what you guys had to say. Plus I honestly know very little about systems and what is good and bad pratice. My organisation has always more or less worked on the concept of local machines; since it primarily employed contractors who were working from home, each of those people was largely responsible for their own machine and backup procedures and the like. We're now expanding, though we're still reasonably small (we're up to about 20 staff members). Most people still work remotely, but we have a central office where about five people are working. But we're getting large enough that we're starting to think it would be a good idea to have a central file server, and things like that - if someone gets hit by a bus, we want someone else to know where to look for the files to continue their work. A lot of the people who work for us remotely work on projects for other companies as well, so I don't want to force them to log in to our server whenever they're on a network. But I do want to make connection to be as painless as possible to do so, to improve utilisation. The other thing is that we're getting more people who would like to remote into the office server and do their work there. Our current remote connection application is an SSH install that allows people access to the network; the problem is, it's a black box to me, and I've never understood how to even connect to it (despite supposedly being de facto sysadmin). Thus far I've been able to bounce questions about how to get it working to the guy who does know it well, but he's leaving the company soon. So we probably need a solution for this that I actually understand. We were knocking around the idea of implementing a VPN with some form of remote desktop, and someone mentioned that this was largely a matter of purchasing a router capable of it; I'm not sure of the truth of that statement. This is what we have in the office: Two shiny new i7 servers, each running Windows Server 2008. Precise eventual layout is still being debated, a little, but the current suggestion is that one is primary database crunching, while the other is a warm backup of the databases, along with running Reporting Services. They currently have SQL Server 2008 installed on them, which is being connected to via the 'sa' account. We're hoping to make each person use their own account (preferably one tied to the 'central' password we set up, so we can use Windows Authentication). An older server, running XP Pro, that we are currently using as a test bed for a project that requires access to older versions of software. This machine is also being used to take backups, but I'm thinking of moving that functionality elsewhere. A spare desktop from a guy who left the company (XP Pro). We're thinking of bumping up the hard disk space and using it as the magical file server that's going to solve one particular everything. Assorted desktops, laptops, etc, at least one for each person in the office (mix of Win XP and Win 7; occasionally a person who normally works remotely might drop in to the office and bring a laptop bearing Vista, but it's pretty rare). All are set up as local user accounts at the moment; I don't know if it's the best arrangement. Purchasing more hardware is not a big problem, but we figure we might as well make use of what we've got first. Is Active Directory a big magic wand that's going to solve all the world's problems? Is there some other arrangement we should be looking to instead?

  Read the article

• Core Data migration problem: "Persistent store migration failed, missing source managed object model

  - by John Gallagher

  The Background A Cocoa Non Document Core Data project with two Managed Object Models. Model 1 stays the same. Model 2 has changed, so I want to migrate the store. I've created a new version by Design Data Model Add Model Version in Xcode. The difference between versions is a single relationship that's been changed from to a one to many. I've made my changes to the model, then saved. I've made a new Mapping Model that has the old model as a source and new model as a destination. I've ensured all Mapping Models and Data Models and are being compiled and all are copied to the Resource folder of my app bundle. I've switched on migrations by passing in a dictionary with the NSMigratePersistentStoresAutomaticallyOption key as [NSNumber numberWithBool:YES] when adding the Persistent Store. Rather than merging all models in the bundle, I've specified the two models I want to use (model 1 and the new version of model 2) and merged them using modelByMergingModels: The Problem No matter what I do to migrate, I get the error message: "Persistent store migration failed, missing source managed object model." What I've Tried I clean after every single build. I've tried various combinations of having only the model I'm migrating to in Resources, being compiled, or both. Since the error message implies it can't find the source model for my migration, I've tried having every version of the model in both the Resources folder and being compiled. I've made sure I'm not making a really basic error by switching back to the original version of my data model. The app runs fine. I've deleted the Mapping Model and the new version of the model, cleaned, then recreated both. I've tried making a different change in the new model - deleting an entity instead. I'm at my wits end. I can't help but think I've made a huge mistake somewhere that I'm not seeing. Any ideas?

  Read the article

• WebSocket handshake with Ruby and EM::WebSocket::Server

  - by Chad Johnson

  I am trying to create a simple WebSocket connection in JavaScript against my Rails app. I get the following: WebSocket connection to 'ws://localhost:4000/' failed: Error during WebSocket handshake: 'Sec-WebSocket-Accept' header is missing What am I doing wrong? Here is my code: JavaScript: var socket = new WebSocket('ws://localhost:4000'); socket.onopen = function() { var handshake = "GET / HTTP/1.1\n" + "Host: localhost\n" + "Upgrade: websocket\n" + "Connection: Upgrade\n" + "Sec-WebSocket-Key: x3JJHMbDL1EzLkh9GBhXDw==\n" + "Sec-WebSocket-Protocol: quote\n" + "Sec-WebSocket-Version: 13\n" + "Origin: http://localhost\n"; socket.send(handshake); }; socket.onmessage = function(data) { console.log(data); }; Ruby: require 'rubygems' require 'em-websocket-server' module QuoteService class WebSocket < EventMachine::WebSocket::Server def on_connect handshake_response = "HTTP/1.1 101 Switching Protocols\n" handshake_response << "Upgrade: websocket\n" handshake_response << "Connection: Upgrade\n" handshake_response << "Sec-WebSocket-Accept: HSmrc0sMlYUkAGmm5OPpG2HaGWk=\n" handshake_response << "Sec-WebSocket-Protocol: quote\n" send_message(handshake_response) end def on_receive(data) puts 'RECEIVED: ' + data end end end EventMachine.run do print 'Starting WebSocket server...' EventMachine.start_server '0.0.0.0', 4000, QuoteService::WebSocket puts 'running' end The handshake headers are per Wikipedia.

  Read the article

• Start TabActivity from ListActivity (which is content of parent TabActivity) in Android

  - by barmaleikin

  Hi guys, I have problems with switching between activities. I have two TabActivities (A and B), each of of tab activity has 4 tabs with ListActivity. I am trying to show B activity onListItemClick. Code on click is: Intent intent = new Intent(getApplicationContext(), TabBActivity.class); startActivity(intent); My manifest file is following: <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/app_icon" android:label="@string/app_name" android:debuggable="true"> <activity android:name=".SplashScreen" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".TabAActivity"> <intent-filter> <action android:name="com.TabAActivity" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".TabAListActivityA" android:label="AA"/> <activity android:name=".TabAListActivityB" android:label="AB"/> <activity android:name=".TabAListActivityC" android:label="AC"/> <activity android:name=".TabBActivity" android:label="B"/> <activity android:name=".TabAListBctivityA" android:label="BA"/> <activity android:name=".TabAListBctivityB" android:label="BB"/> <activity android:name=".TabAListBctivityC" android:label="BC"/> </application> </manifest> Is my manifest correct or maybe something is wrong with code? I would appreciate any help on this topic.

  Read the article

• Silverlight 4. Activator.CreateInstance uses a huge amount of memory

  - by Marco

  Hi, I have been playing a bit with Silverlight and try to port my Silverlight 3.0 application to Silverlight 4.0. My application loads different XAP files and upon a user request create an instance of a Xaml user control and adds it to the main container, in a sort of MEF approach in order I can have an extensible and pluggable application. The application is pretty huge and to keep acceptable the performances and the initial loading I have built up some helper classes to load in the background all pages and user controls that might be used later on. On Silverlight 3.0 everything was running smoothly without any problem so far. Switching to SL 4.0 I have noticed that when the process approaches to create the instances of the user controls using Activator.CreateInstance, the layout freezes unexpectedly for a minute and sometimes for more. Looking at the task manager the memory usage of IE jumps from 50MB to 400MB and sometimes to 1.5 GB. If the process won't take that much the layout is rendered properly and the memory falls back to 50 MB. Otherwise everything crashes due to out of memory exeption. Does anybody encountered the same problem? Or has anybody a solution about this tricky issue? Thans in advance Marco

  Read the article

• dijit tree and focus node

  - by user220836

  Hello, I cannot get focusNode() or expandNode() get working. I also tried switching back to dojo 1.32 and even 1.3, no difference to 1.4. And I debugged with firebug, the node is a valid tree node and no errors occur but the node wont get focused. Help is VERY appreciated! <head> <script type="text/javascript"> dojo.declare("itcTree",[dijit.Tree], { focusNodeX : function(/* string */ id) { var node=this._itemNodesMap[id]; this.focusNode(node); } }); </script> </head> <body class="tundra"> <div dojoType="dojo.data.ItemFileReadStore" jsId="continentStore" url="countries.json"> </div> <div dojoType="dijit.tree.ForestStoreModel" jsId="continentModel" store="continentStore" query="{type:'continent'}" rootId="continentRoot" rootLabel="Continents" childrenAttrs="children"> </div> <div dojoType="itcTree" id="mytree" model="continentModel" openOnClick="true"> <script type="dojo/method" event="onClick" args="item"> dijit.byId('mytree').focusNodeX('AF'); </script> </div> <p> <button onclick="dijit.byId('mytree').focusNode('DE');">klick</button> </p> </body>

  Read the article

• Ivar definitions show 'long' type encoding as 'long long' type encoding

  - by Frank C.

  I've found what I think may be a bug with Ivar and Objective-C runtime. I'm using XCode 3.2.1 and associated libraries, developing a 64 bit app on X86_64 (MacBook Pro). Where I would expect the type encoding for the following "longVal" to be 'l', the Ivar encoding is showing a 'q' (which is a 'long long'). Anyone else seeing this? Simplified code and output follows: Code: #import <Foundation/Foundation.h> #import <objc/runtime.h> @interface Bug : NSObject { long longVal; long long longerVal; } @property (nonatomic,assign) long longVal; @property (nonatomic,assign) long long longerVal; @end @implementation Bug @synthesize longVal,longerVal; @end int main (int argc, const char * argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; unsigned int ivarCount=0; Ivar *ivars= class_copyIvarList([Bug class], &ivarCount); for(unsigned int x=0;x<ivarCount;x++) { NSLog(@"Name [%@] encoding [%@]", [NSString stringWithCString:ivar_getName(ivars[x]) encoding:NSUTF8StringEncoding], [NSString stringWithCString:ivar_getTypeEncoding(ivars[x]) encoding:NSUTF8StringEncoding]); } [pool drain]; return 0; } And here is output from debug console: This GDB was configured as "x86_64-apple-darwin".tty /dev/ttys000 Loading program into debugger… sharedlibrary apply-load-rules all Program loaded. run [Switching to process 6048] Running… 2010-03-17 22:16:29.138 ivarbug[6048:a0f] Name [longVal] encoding [q] 2010-03-17 22:16:29.146 ivarbug[6048:a0f] Name [longerVal] encoding [q] (gdb) continue Not a pretty picture! -- Frank

  Read the article

• viewDidLoad not being called by parent UITabBarController

  - by Adam Bishop

  Sample: I've created a minimal set of files that highlight the issue here: http://uploads.omega.org.uk/Foo3.zip If viewDidLoad/viewInitWithNibName are called, a message box is displayed. The message box is not displayed, therefore, the methods are not being called. Details: I have an application that is attempting to use a UITabBarController to switch between multiple views. The views are linked up to the UITabBarController using interface builder (select the tab page, open Attributes (Option-1), and fill in the NIB Name field), and so are displayed "automatically" with no extra code-behind to make them appear. Is it intended behaviour that views loaded like this do not have their viewDidLoad method executed? If not, how am I doing it wrong, and what do I need to change. If it is intended behaviour, I can think of a few work-arounds, but any suggestions are appreciated: Scrap the UITabBarController and implement the view switching myself (using initWithNibName and add/insert/push/Subview). Call each of the children's viewDidLoad method manually in the UITabBarController's own viewDidLoad method. Thank you in advance for any help you can offer.

  Read the article

• Using Fancybox with Google Static Maps

  - by Levi Hackwith

  Setup I have multiple links on a page with the class location_link Each Links rel attribute is equal to a city state combo (i.e.,Omaha, NE) Once the page is loaded, a JavaScript function loops through all of the location_link items and binds a click event to them using jQuery. This click event fires a call to the Fancybox constructor that is supposed to show a Google Map of the location that link is associated with The Problem: Whenever I click on one of the "location links", I get the following error message: The requested content cannot be loaded. Please try again later. Code I've Already Written: function setUpLocationLinks() { locationLinks = $("a.location_link"); locationLinks.click( function() { var me = $(this); console.log(me.attr("href")); $.fancybox( { "showCloseButton" : true, "hideOnContentClick" : true, "titlePosition" : "inside", "title" : me.attr("rel"), "type" : "image" } ) return false; } ); } Research I've Already Done: The Google Static Map API no longer requires an API Key. The following is from the Google Static Maps API Page Note: The Google Static Maps API no longer requires a Maps API key! (Google Maps API Premier customers should instead sign their URLs using a new cryptographic key which will be sent to you. See the Premier documentation for more information.) The The Image URL I'm using does resolve and pulls back the data I need When I put the above mentioned URL into a standard <img> tag, the map shows up just fine. I'd like to pull this off without having to create some sort of dummy <img> tag that I'm constantly switching the src attribute out of. Hopefully, you'll find this information helpful. Please let me know if you have any other questions.

  Read the article

• Reloading an external element (via jQuery's .load) without impact on same-named host elements on sam

  - by Martin Pescador

  Hello together! [First, I'm an absolute beginner. I tried to express myself as good as I could - please correct me on any issue... Now: I have the following problem:] I am loading a div element, which class always is ".gallery" from a couple of pages (in this example "the page index.php?page=orange") into another page's div (in this case with the ID "orange") using the following code: $("#orange").load("http://example.com/index.php?page=orange .gallery"); Each div.gallery I load in, is a set of a few images. Between them, you can switch (there are "previous"- and "next"-links in ".imgnavi"). $(".imgnavi a").live("click", function(ev) { ev.preventDefault(); ev.stopPropagation(); $(".gallery").load($(this).attr("href")); return false; }) What happens now: Loading the different div.gallery into the new page is no problem, but as soon as I start to navigate inside those divs (each div is a little gallery, where you can switch between images), the div.gallery I am switching in is suddenly loaded into EVERY other div.gallery in the document! How do I prevent that?

  Read the article

• SQLite NHibernate configuration with .Net 4.0 and vs 2010

  - by Berryl

  I am having way too much trouble getting my environment straight after switching to 2010 and .net 4.0, so I'd like to break the whole process down once and for all. 1) Which SQLite dll?? I think it is SQLite-1.0.65.1-vs2010rc-net4-setup.zip. Yes? 2) I ran the installer so the dll is in the GAC but I usually find there are less problems if I can just reference the dll stand alone. Is there any reason it needs to be in the GAC, and if not, what's the best way to uninstall it from the GAC (I can get to the GAC folder but it says I need permission to delete the files; should I leave the SQLite Designer dll's there?)? 3) x64. There is an x64 dll in the download. I had problems with SQLite in the past though that I could only resolve by compiling to x86. Can I safely reference the x64 dll and compile to Any CPU now? 4) what is the right NHib config? I have been using the one below, but since the error I get says "Could not create the driver from NHibernate.Driver.SQLite20Driver." that configuration is guilty until proven innocent too? 5) could FNH be a problem too? I don't use the pre-configured fluent SQLite method but FNH has to provide a reference to it for that to work, no? TIA & Cheers, Berryl <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> ... <property name="dialect">NHibernate.Dialect.SQLiteDialect</property> <property name="connection.driver_class">NHibernate.Driver.SQLite20Driver</property> <property name="connection.connection_string">Data Source=:memory:;Version=3;New=True;</property> .... </hibernate-configuration>

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >