Search Results

Search found 3575 results on 143 pages for 'tower defense games'.

Page 93/143 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Building new computer, turns on, but no post

    - by addybojangles
    Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

    Read the article

  • Are these computer parts compatible?

    - by Jcubed
    so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

    Read the article

  • Mounting 2.5" SSD in Antec Atlas 550's 3.5" bay

    - by cecilkorik
    Just got some new SSDs to add to my servers, unfortunately there doesn't appear to be anywhere to actually mount them. The cases are Antec Atlas 550 mid-tower server cases. The problem is that the 3.5" bays are intended for 3.5" hard drives (obviously) not SSDs, so they are mounted from the bottom with rubber grommets to reduce vibration. There are NO side-holes in any of the 3.5" bays, all mounting has to be done from the bottom of the drive, through the thick rubber grommets, which requires special extra-long screws with large heads. Those screws will not work with the SSD, the thread is too coarse, 2.5" drives apparently use M3 screws with a finer pitch. The case's 3.5" bays have holes aligned for 2.5" drives and by moving the grommets into the appropriate holes they line up with the SSD. But that's as far as I can get. I don't have and cannot find any screws that use the finer M3 pitch that are long enough and have the wide head. I can't remove the grommets because the screw holes are much too wide without them, the entire head of the screw fits through. And again, there are no side-holes, so I can't use the mounting bracket that came with the drive nor any other 2.5"-3.5" bracket I've found. Here is a pic of what I am dealing with (note that the SSD is just resting on the case, it's not currently screwed in if that's not clear) Any ideas for safely mounting these little guys without resorting to duct tape or superglue would be very appreciated. If anyone knows where I could buy the appropriate type of M3 threaded screw or has any other ideas please help me out here.

    Read the article

  • Why does my computer crash randomly?

    - by Donavon Decker
    The other day I went out to my van to get my Tower and when I opened the trunk it fell out. I brought it into the house and opened it, and everything looked ok. When I started it up, about 1-3 minutes afterwards it would crash. It did this over and over until I reseated the cooler. Everything seemed normal again, until after about 10 minutes of gameplay (any game), it would crash. I reseated my GPU + reinstalled the drivers, however I still get the same error. A while back, I'd check my 'Windows Rating' periodically, and all of them were in the '6.0-6.9' range except for my hard disk usage (always been like that [not relative]). Today I went in and looked, and my Processor and Memory was rated 5.4. I reseated my cpu and my memory, refreshed the windows rating, and then my processor and memory went from 5.4, to 5.1. A few minutes ago I reseated them once again, and now it's back to 5.4. Note: Not sure if this is relevant to the issue, but I updated my bios earlier today I honestly have no idea what the issue is, but I'm getting aggravated at the problem. Here are some images which contain images of my specifications: i1271.photobucket.com/albums/jj623/donxdeck/1_zps09f0607c.jpg i1271.photobucket.com/albums/jj623/donxdeck/4_zps381cd00a.jpg i1271.photobucket.com/albums/jj623/donxdeck/3_zps54bba720.jpg i1271.photobucket.com/albums/jj623/donxdeck/2_zps945d3d72.jpg Thanks for the help

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • Is my dns server being attacked? And what should I do about it?

    - by Mnebuerquo
    I've been having some intermittent dns problems with a web server, where certain isp's dns servers don't have my hostnames in cache and fail to look them up. At the same time, queries to opendns for those hostnames resolve correctly. It's intermittent, and it always works fine for me, so it's hard to identify the problem when someone reports connectivity problems to my site. In trying to figure this out, I've been looking at my logs to see if there are any errors I should know about. I found thousands of the following messages in my logs, from different ip's, but all requesting similar dns records: May 12 11:42:13 localhost named[26399]: client 94.76.107.2#36141: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#29075: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#47924: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#4727: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#16153: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#40267: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63507: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63721: query (cache) 'burningpianos.org/MX/IN' denied May 12 11:43:36 localhost named[26399]: client 82.209.240.241#3537: query (cache) 'burningpianos.com/MX/IN' denied I've read of Dan Kaminski's dns cache poisoning vulnerability, and I'm wondering if these log records are an attempt by some evildoer to attack my dns server. There are thousands of records in my logs, all requesting "burningpianos", some for com and some for org, most looking for an mx record. There are requests from multiple ip's, but each ip will request hundreds of times per day. So this smells to me like an attack. What is the defense against this?

    Read the article

  • Cooling Server Closet - No A/C Is Possible

    - by JamesCo
    We're moving into a new office in an old building in London (that's England :) and are walling off a 2m x 1.3m area where the router & telephone equipment currently terminates to use as a server closet. The closet will contain: 2 24-port switches 1 router 1 VSDL modem 1 Dell desktop 1 4-bay NAS 1 HP micro-server 1 UPS Miscellaneous minor telephony boxes. There is no central A/C in the office and there never will be. We can install ducting to the outside quite easily - it's only a couple of metres to the windows, which face a courtyard. My question is whether installing an extractor fan with ducting to the window should be sufficient for cooling? Would an intake fan and intake duct (from the window, too) be required? We don't want to leave a gap in the closet door as that'll let noise out into the office. If we don't have to put a portable A/C unit into the closet, that'd be perfect. The office has about 12 people; London is temperate, average maximum in August is 31 Celsius, 25 Celsius is more typical. The same equipment runs fine in our current office (same building as new office, also no A/C) but it isn't in an enclosed space. I can see us putting say one Dell 2950 tower server into the closet, but no more than that. So, sustained power consumption in the closet would currently be about 800w (I'm guessing); possibly in the future 2kw. The closet will have a ceiling and no windows and be well-insulated. We don't care if the equipment runs hot, so long as it runs and we don't hear it.

    Read the article

  • Postfix Whitelist before recipient restrictions

    - by GruffTech
    Alright. Some background. We have an anti-spam cluster trucking about 2-3 million emails per day, blocking somewhere in the range of 99% of spam email from our end users. The underlying SMTP server is Postfix 2.2.10. The "Frontline defense" before mail gets carted off to SpamAssassin/ClamAV/ ect ect, is attached below. ...basic config.... smtpd_recipient_restrictions = reject_unauth_destination, reject_rbl_client b.barracudacentral.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.mailspike.net, check_policy_service unix:postgrey/socket ...more basic config.... As you can see, standard RBL services from various companies, as well as a Postgrey service. The problem is, I have one client (out of thousands) who is very upset that we blocked an important email of theirs. It was sent through a russian freemailer who was currently blocked in two of our three RBL servers. I explained the situation to them, however they are insisting we do not block any of their emails. So i need a method of whitelisting ANY email that comes to domain.com, however i need it to take place before any of the recipient restrictions, they want no RBL or postgrey blocking at all. I've done a bit of research myself, http://www.howtoforge.com/how-to-whitelist-hosts-ip-addresses-in-postfix seemed to be a good guide at first, almost fixing my problem, But i want it to accept based on TO address, not originating server.

    Read the article

  • Password Cracking Windows Accounts

    - by Kevin
    At work we have laptops with encrypted harddrives. Most developers here (on occasion I have been guilty of it too) leave their laptops in hibernate mode when they take them home at night. Obviously, Windows (i.e. there is a program running in the background which does it for windows) must have a method to unencrypt the data on the drive, or it wouldn't be able to access it. That being said, I always thought that leaving a windows machine on in hibernate mode in a non-secure place (not at work on a lock) is a security threat, because someone could take the machine, leave it running, hack the windows accounts and use it to encrypt the data and steal the information. When I got to thinking about how I would go about breaking into the windows system without restarting it, I couldn't figure out if it was possible. I know it is possible to write a program to crack windows passwords once you have access to the appropriate file(s). But is it possible to execute a program from a locked Windows system that would do this? I don't know of a way to do it, but I am not a Windows expert. If so, is there a way to prevent it? I don't want to expose security vulnerabilities about how to do it, so I would ask that someone wouldn't post the necessary steps in details, but if someone could say something like "Yes, it's possible the USB drive allows arbitrary execution," that would be great! EDIT: The idea being with the encryption is that you can't reboot the system, because once you do, the disk encryption on the system requires a login before being able to start windows. With the machine being in hibernate, the system owner has already bypassed the encryption for the attacker, leaving windows as the only line of defense to protect the data.

    Read the article

  • Using a Linksys Wireless- G Broadband Router for a Wireless Antenna/Adapter?

    - by Alex
    (Warning: I'm not too computer-smart). Just moved fm a home where I used ATT DSL to a home w/ Comcast Cable for internet. Old home had the DSL ethernet wired to my only desktop w/ a 2Wire router for my wireless signal for the laptops. In the new home the signal comes fm cable via a Netgear(300) wireless router (remotely located) & works fine for my laptops. After searching with the network software, my desktop (can't be ethernet wired cuz of location) detects no wireless signal. Desktop is a 2 yr old HP p6311f Pavilion (Windows 7). Can't seem to detect any wireless hardware (ant/adaptr). Maybe I don't have the ability & need to buy a USB wireless antenna? Would the Pavilion come w/ wireless capability out of the box, maybe something inside the tower? No antenna on back. I happen to have a Linksys Wireless router which I plugged in to the desktop (trying both internet & shared ports) & noticed signal action on the router front panel. No internet on desktop though. Can I use this as an antenna for the desktop? Thanks & sorry if my solution is an easy one I'm just missing. Just want internet on the desktop.

    Read the article

  • Rebuild Apple RAID set

    - by Clinton Blackmore
    We have a Mac Pro tower with an Apple RAID card in it using third party drives. When one drive failed, we replaced it and the RAID 5 set was nearly done rebuilding when the computer was rebooted. It did not come back up. We are now booting up off of a different internal volume, and have three (third-party) drives of identical spec (including revision and firmware) in the box. One of the drives is a global spare; the other two are recognized as belong to a RAID set but are in "Roaming" mode. The intention is to recreate the three-drive RAID set using the data on the two drives that are good. When we tell the system to create a RAID 5 using the three drives, it tells us that it'll create a RAID set but everything will be lost. There are no obvious options to rebuild a RAID using the two good drives and incorporating the third drive in Apple's RAID Utility, and we've looked through the options for the raidutil command. Fortunately, all important data is backed up, and we can rebuild from scratch, but, is there any way to make the RAIDset work again?

    Read the article

  • Verizon 4G LTE vs. a LAN

    - by n8wrl
    I have been having quite a bit of trouble getting my new Verizon 4G-LTE service running on a Windows 7 desktop. My desktop is on a LAN here at home with two other PC's. We all share printers, files, media, etc. Until yesterday, we also shared a Verizon 3G modem via a NetGear 3G broadband WAP. That isn't compatible with the 4G so now I am just trying to get the 4G modem working directly connected to one of the desktops. After some USB wrangling, it seems to work. Except, every 7-10 minutes the connection would drop. After some time on the phone with a very nice Verizon technician, it seems to be staying up - it's been up for 20 minutes now. He told me that my LAN was causing the 4G to drop. That traffic on my LAN, even though it is not destined for the internet (ICS not working yet) was causing the cell tower to detect an 'IP change' and a 'security violation' in my modem and drop my connection. Is this Verizon's way of forbidding more than one computer to share a modem? I have my computer running now without a LAN connection and the 4G is still up. But this isn't practical. Has anyone heard of this?

    Read the article

  • Netgear GS724Tv3 and link aggregation Mac OS X Server 10.6.8

    - by Manca Weeks
    I need to link aggregate 2 sets of ports on the Netgear GS724T with my Apple server tower (latest generation). I have 2 built in ports and 2 ports on a PCIe ethernet card. It is not obvious to me how to properly configure the Netgear end. I have access to the Netgear box through its web interface, just don't know how to properly set the settings. I tried going to Netgear for help, but they said my software support has expired. I bought this unit on their recommendation - they say it is compatible with 802.3ad protocol. I cannot locate any references to this protocol in the manual and I noticed some people in formus say that this device is actually not compatible with 802.3ad and that Netgear is misleading potential customers by saying it is. Any help will be appreciated. Thanks, M My own answer - posted as edit because of restrictions on my user: OK folks, turns out one must use a Windows machine on this one or nothing makes sense. I was unable to get much farther than viewing the default inactive LAGs because in Firefox and Safari on Mac things don't make much sense - i.e. the Apply buttons (supposedly JavaScript) don't work. You can view the configurations, but none of the modifications you make stick. Then, in Switching - LAGs, choose the ports to include and make sure you switch the LAG type from Static to LACP and all is well. Haven't tested the performance of the config yet, but both sides appear to be happy with the configuration. Apple server says link active and so does the Netgear. Will report if any other discoveries. Thanks for all who read and to user84104 for responding. M

    Read the article

  • Windows 8.1 - Won't boot (0xc000000f), bcdedit fails

    - by user3014097
    I’m pretty much stuck at this point. So, backstory: Windows was installed on one of the SSDs currently in my tower. I bought a new SSD to install Windows (8.1 64 bit) on. Windows installation went fine, booted up, and formatted the old SSD from within Windows (this seems to have been a mistake, but I didn’t realize that at the time). Despite formatting the old SSD, whenever I tried to boot I was told that there were 2 Windows installations. Apparently, when I formatted the old drive, not all of the partitions were removed. So, I booted up with the repair utility, went into cmd, and deleted the non-primary partitions on the old SSD (there were 2 – think they were system and recovery, although I’m forgetting now). Reboot – computer won’t boot. Getting the 0xc000000f “The boot selection failed because a required device is inaccessible” error. Troubleshooting so far: Automatic repair doesn’t fix anything (I’ve never had luck with it though) If I go to install a new version of Windows, the drives and partitions are all there. The SSD is functioning, I at least know that. I’ve essentially gone through this guide: https://neosmart.net/wiki/recovering-windows-bootloader/ Unfortunately, I’m not getting anywhere. I’m not even entirely sure how to describe the errors I’m getting, so I’ve just included pictures of every step (I can't actually post them though so I just included a photobucket link). http://s319.photobucket.com/user/DGalt11/library/Computer%20Issue Am I completely screwed here (i.e. reformat and reinstall?)? Thanks

    Read the article

  • How to Identify Which Hardware Component is Failing in Your Computer

    - by Chris Hoffman
    Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr     

    Read the article

  • Goodbye my beloved Nexus One, hello Windows Phone 7

    - by George Clingerman
    Last night my wife’s Nexus One finally bit the dust. You may not know but I’ve been nursing her Nexus One one along for quite a while after her screen shattered. I was able to replace it on my own (go me!) but little quirks have been popping up and the phone was quickly deteriorating. Lately it’s been the power button. Wifey would often have to press the power button several times to get her phone to turn on and last night it just wouldn’t wake up again. I took it apart and tried my best to see if I could somehow make it live once again but no luck this time. It was finally ready to retire. We looked at first for a replacement phone for her but she wasn’t really seeing anything she liked. So I decided to make the ultimate sacrifice and offer up my much loved Nexus One and I would then get a new Windows Phone 7 device. I love T-Mobile for my service so my choices were immediately limited to basically just a single phone. The HTC HD7. I read reviews and they were all over the board from people loving to people hating the phone but I decided, hey, why not, let’s take this plunge. And I did. I’ve only had the phone for about two days now so below is my list of first reaction pros/cons. These are basically things I’ve missed or things I’ve noticed that I really like about my new Windows Phone. Cons: * No Google Talk – I used this a LOT on my Nexus. I’ve found an application called “Flory” but it’s just an ok substitute, not the same as the full featured GTalk I had on my Nexus. * Seesmic is limited– I loved the way Seesmic worked on my Nexus. It was my mobile twitter client of choice. Everything about it worked really well. On Windows Phone 7 it’s just ok. I don’t get notification of new tweets, it’s several clicks to even see a new tweet. It’s definitely got some more development before it has the same features as it did on my Nexus. * Buttons don’t give great feedback – I’d read this on the reviews about the HTC HD7 and I’m finding it true myself. Pressing the buttons on the side of the phone and the power button on the top is finicky and I have to be looking at my phone to make sure I actually got them to press. * Web browsing is slow – I’m not sure what’s up with this, I’m connected to my wireless network at my house but it’s noticeably slower on my WP7 device than my Nexus. I even switched back to verify and it’s definitely true. Retrieving tweets, hitting up the XNA forums and just general web activities are all much slower on my WP7. I can’t think of any reason this would be true but it almost seems like it’s not using my wireless for everything.   Pros: * It’s pretty – the phone is really gorgeous. I loved the form of my Nexus One by the HTC HD7 is just as pretty, maybe even prettier! It’s got a nice large, bright screen. It feels good in my hand. And it even has a little kickstand to set the phone up for movie watching. Definitely a gorgeous phone. * LIVE integration – I lost a lot of nice integration with Google services but I gained a lot of integration with LIVE services that I also use. Now I can see when I get new GMail messages AND Hotmail messages. And having the Xbox LIVE integration is admittedly cool as well. * Tile notification rock – The Windows Phone 7 commercials are TRYING to get this message out but they’re doing a really poor job of this. Tile notifications really do save you from your phone. I have a whole little mini-informational dashboard at a glance. I unlock my phone and at a glace I can see new IMs, new mail messages, software updates etc. All just letting me know in the tiles I have arranged. That’s pretty cool. * The interface works really well – I feel super hip and cool swiping and sliding things around on my Windows Phone 7. Everything works that way and it’s great and fast and really good looking. I’m all about me feeling cool. * I’m gaming more – I had gotten a few games on my Nexus One but there really weren’t a lot of good developers flocking to the service. Just browsing through the Windows Phone 7 marketplace I’m already seeing a ton of games I want to try and buy. And I sat down and bet Pixel Man 0 just yesterday on my phone. I’m already gaming more than I did on my Nexus One. * Netflix integration is fantastic - It works just like it does on my Xbox 360 and I love having this feature on my phone. * It’s basically a Zune – I’ve been taking my Zune to work and listening to music off of that while I code. I no longer need to take it with me, now I just sync songs onto my phone and it’s my new Zune. I freaking love that. One less device to carry around.   All in all my cons have really little to do with the phone (just the buttons and the web browsing) and more to do with the applications needing to catch up a bit to what I’m used to. And the Pros are things that ARE phone specific so I’m seeing that as a good sign that I’m going to be very happy with my Windows Phone 7. So Wifey is happy having her Nexus One again, I’m happy with my new Windows Phone 7. Life is good. Now I just need to make a game to pay for it….

    Read the article

  • 553-Message filtered - HELO Name issue?

    - by g18c
    I am having major issues sending from my SBS2011 machine to Message labs server-13.tower-134.messagelabs.com #553-Message filtered. Refer to the Troubleshooting page at 553-http://www.symanteccloud.com/troubleshooting for more 553 information. (#5.7.1) ## I have changed the IP and hostnames from the below. I am not on any IP or domain blacklists. I have setup SPF (which includes mailchimp servers): v=spf1 mx a ip4:95.74.157.22/32 a:remote.mydomain.com include:servers.mcsv.net ~all I am sure i have setup my HELO names correctly under the Exchange Management console, sending a test email from the SBS server and looking at the header shows the following: X-Orig-To: [email protected] X-Originating-Ip: [95.74.157.22] Received: from [95.74.157.22] ([95.74.157.22:52194] helo=remote.mydomain.com) by smtp50.gate.ord1a.rsapps.net (envelope-from <[email protected]>) (ecelerity 2.2.3.49 r(42060/42061)) with ESMTP id 11/90-10010-E529C835; Mon, 02 Jun 2014 11:04:09 -0400 Received: from MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef]) by MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef%10]) with mapi id 14.01.0438.000; Mon, 2 Jun 2014 19:03:56 +0400 Is is the main helo name there OK and do i need to worry about the second Received block where the MYSBSVR.mydomain.local is mentioned? I have asked the ISP to set the reverse DNS for my IP to remote.mydomain.com but they have instead put remote.MYDOMAIN.com - would this case cause HELO lookups to classify this as not matching? Anything else I can do to find out why i am being filtered?

    Read the article

  • New build won't boot: some fans turning, no beep or video

    - by Dave
    When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

    Read the article

  • Additional Security Measures for Syslog over SSH

    - by Eric
    I'm currently working on setting up some secure syslog connections between a few Fedora servers. This is my currently setup 192.168.56.110 (syslog-server) <---- 192.168.57.110 (syslog-agent) From the agent, I am running this command: ssh -fnNTx -L 1514:127.0.0.1:514 [email protected] This works just fine. I have rsyslog on the syslog-agent pointing to @@127.0.0.1:1514 and it forwards everything to the server correctly on port 514 via the tunnel. My issue is, I want to be able to lock this down. I am going to use ssh keys so this is automated because there will be multiple agents talking to the server. Here are my concerns. Someone getting on the syslog-agent and logging into the server directly. I have taken care of this by ensuring that syslog_user has a shell of /sbin/nologin so that user can't get a shell at all. I don't want someone to be able to tunnel another port over ssh. Ex. - 6666:127.0.0.1:21. I know my first line of defense against this is to just not have anything listening on those ports and it's not an issue. However I want to be able to lock this down somehow. Are there any sshd_config settings on the server that I can use to make it where only port 514 can be tunneled over ssh? Are there any other major security concerns I'm overlooking at this point? Thanks in advance for your help/comments.

    Read the article

  • nginx config woes for multiple subdomains & domains

    - by Peter Hanneman
    I'm finally moving away from Apache and I've got the latest development version of nginx running on a fully updated Ubuntu 10.04 VPS. I've got a single dedicated IP for the box (1.2.3.4) but I've got two separate domains pointing to the server: www.example1.com and www.example2.net. I would like to map the fallowing relationships between urls and document roots in the config: www.example1.com / example1.com -> /var/www/pub/example1.com/ subdomain.example1.com -> /var/www/dev/subdomain/example1.com/ www.example2.net / example2.net -> /var/www/pub/example2.net/ subdomain.example2.net -> /var/www/dev/subdomain/example2.net/ Where the name of the requested subdomain is a folder under /var/www/dev/. Ideally a request for a non-existent subdomain(no matching folder found) would result in a rewrite to the public site (eg: invalid.example1.com -- www.example1.com) however a mere "404 Not Found" wouldn't be the worst thing in the world. It would also be nice if I didn't need to modify the config every time I mkdir a new subdomain folder - even better if I don't need to edit it for a new domain either...but now I'm getting greedy... :p Although in my defense Apache did all of this with a single directive. Does anyone know how I can efficiently mimic this behavior in nginx? Thanks in advance, Peter Hanneman

    Read the article

  • Server freezes while installing Redhat Enterprise Linux Server 6

    - by eisaacson
    We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

    Read the article

  • Building vs buying a server for an academic lab [closed]

    - by Roy
    I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

    Read the article

  • Network Sharing Issues

    - by Mark Kramer
    I have two computers I want to have on a network share together (so the laptop can print through the desktop's printer). These are both connected to the same router. (One wired and one wireless) And they both have the same workgroup name. However, when I type "net view" in the command prompt, the only computer that shows up is the computer I type the command into. How do I get these computers to be shared with each other? Update: The tower is running Windows XP, the Laptop is running Windows 7. I have disabled the Firewall on both until I get this set up. Update 2: Typing the command net view on my desktop is acting very strangely. Noe sometimes it only shows itself on the list of computers, sometimes it shows itself and the laptop and sometimes it doesn't work at all and displays system error 6118. I typed net view into the command prompt on the Windows 7 laptop and both computers showed up, so I went to connect to the desktop from the laptop and it said the dekptop could not be found, even though it is showing up int he list of shared computers. Here are supporting pictures (these are coming from the laptop)

    Read the article

  • Computer making strange sound when turned on, ever since power outage

    - by Dot NET
    Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

    Read the article

  • W7-pro indexing mydoc on disk partition does not work

    - by Yvan Thery
    I am working on a HP-7100 mini tower running W7 Pro 64bits. My Local HD includes C:/ + 2 disk partitions : all my documents are located on disk partition L:/ and all my media files are on disk partition M:/ The indexing process works well on C:/ and M:/ but does not index the L:/ any more also all of them are allowed to be indexed, also the system is present on all drive security tabs. I have tested to rebuilt the indexing file with a new setting including few directories present on drive C/M/L but still with L: does not work ! One more thing I can tell you is that even after rebuilding the indexing file, I can find some residual directories or files which are out of the test selection. It is like unerased components remaining in the indexing database. As I do not know precisely how the indexing process works it is hard to know what to do ... Recently I had a bad time after using a past restoration procedure ... maybe it did corrupt the indexing file ???? If I start indexing the all L:/ disk partition the system stop at 39 found index also many more are existing .... Does any one from you guys could advise the process to create a new indexing database ... ? Any idea to get out of this mess ? Many thanks for assistance Yvan

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >