Search Results

Search found 4551 results on 183 pages for 'components'.

Page 94/183 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Dell Optiplex 980 vs. Dell Studio XPS 9000?

  - by Dave

  My company is allowing me to upgrade to either the XPS 9000 or the Optiplex 980. I haven't bought an Optiplex in over a decade, and the only thing I can remember is that the Optiplex is really meant for corporate IT environments, and we're not even close being large enough to have IT issues. I think the components might be of higher quality as well, like the motherboard and power supply. The XPS 9000 is about $150 cheaper than the Optiplex, but the Optiplex has 4GB more RAM, a 2nd video card, and an extra year of service. Seems like the Optiplex is a better deal overall, but since I haven't ever used one, I wanted to see what everyone else here thought.

  Read the article

• xfx 680i motherboard failure?

  - by Ian

  At some point last night we must have had a blip in our power, as the stove clock was blinking like it would had their been... a blip in the power. When I came into my office this morning, my desktop computer was powered down and would not turn on. Cracking the case, I can see a small blue blinking light on the front right corner of the motherboard. Unplugging the power from the PSU causes the blinking to stop. Plugging in the power causes the blinking to resume. Pressing the power button does nothing. Does anyone know what this blinking blue light means? I'm mostly curious now if it's the motherboard that has gone bad, or the power supply. I don't have any other desktop parts to use to troubleshoot these components. Any ideas? My motherboard is an XFX NFORCE 680I SLI INTEL SOCKET 775 DDR2 ( Model #: MB-N680-ISH9 )

  Read the article

• Cannot install Windows 7 on new PC (BSOD during installation)

  - by andronz

  Yesterday I had received new hardware and tried to assemble all of it. But when I was installing Windows 7 x64 for two times I got a BSOD, and a error message like this: Your PC has rebooted unexpectly, installation will continue after reboot. I have checked everything and tried to install once more time. It was almost successful, Windows had installed, but I cannot format my disk, open cmd or control panel, boot from DVD etc. It's the first time I have assembled a PC, and I don't know where the problem is, in my hardware or in Windows. My components: MSI z77a-g43 Intel i5 3570k Seagate Barracuda (plug into sata3 slot 6 Gb, there I have also sata 3 Gb slot) Corsair XMS3 (4x4Gb) HIS IceQ Also in the BIOS, I have changed RAM frequency to DDR3 1600 and voltage to 1.65v

  Read the article

• adobe flash buider (flex4): Error #2025 or Error: addChild() is not available in this class. Instead

  - by user306584

  Hi, I'm a complete newbie to Flex, so apologies for my dumbness. I've searched for an answer but haven't found anything that seems to be doing the trick. What I'm trying to do: port this example http://www.adobe.com/devnet/air/flex/articles/flex_air_codebase_print.html to Flash Builder 4. All seems to be fine but for one thing. When I use the original code for the Air application <?xml version="1.0" encoding="utf-8"?> <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="onApplicationComplete()"> <fx:Script> <![CDATA[ private static const neededForCompilation:AirGeneralImplementation = null; private function onApplicationComplete():void { var can:MainCanvas = new MainCanvas(); this.addChild(can); can.labelMessage = "Loaded in an AIR Application "; } ]]> </fx:Script> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> </s:WindowedApplication> I get this run time error Error: addChild() is not available in this class. Instead, use addElement() or modify the skin, if you have one. at spark.components.supportClasses::SkinnableComponent/addChild()[E:\dev\4.0.0\frameworks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:1038] If I substitute the code with this.addElement(can); Everything loads well but the first time I try to press any of the buttons on the main canvas I get the following run time error ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller. at flash.display::DisplayObjectContainer/getChildIndex() at mx.managers::SystemManager/getChildIndex()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\SystemManager.as:1665] at mx.managers.systemClasses::ActiveWindowManager/mouseDownHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\managers\systemClasses\ActiveWindowManager.as:437] here's the super simple code for the main canvas <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="init();"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <fx:Script source="main.as" /> <mx:Label id="lblMessage" text="The UI from the shared Flex app BothCode" x="433" y="112"/> <s:Button x="433" y="141" click="saveFile();" label="Save File"/> <s:Button x="601" y="141" click="GeneralFactory.getGeneralInstance().airOnlyFunctionality();" label="Air Only"/> </s:Application> Any help would be immensely appreciated. And any pointers to how to setup a project that can compile in both Air and Flash while sharing the same code, all for Flex 4, would also be immensely appreciated. thank you!

  Read the article

• MXMLC Ant task results in java.lang.OutOFMemoryError

  - by Mims H. Wright

  I'm making a change to a set of code for a Flex project that I didn't write and was set up to compile using ant tasks. I assume that the codebase was stable at the last checkin but I'm running into memory issues when trying to build a project using MXMLC and ant (see stack trace below). Before, I was just getting an out of memory error. I tried using a different machine and got this more verbose exception (including problems with the image fetcher). I've tried using various versions of the SDK, I've tried replacing the <mxmlc> tag with <exec executable="mxmlc"> with no luck. Here is my java version in case that has anything to do with it: » java -version java version "1.6.0_20" Java(TM) SE Runtime Environment (build 1.6.0_20-b02-279-10M3065) Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01-279, mixed mode) Any help would be appreciated. Thanks! Buildfile: build.xml compileSWF: [echo] Compiling main.swf... [mxmlc] Loading configuration file /Applications/Adobe Flash Builder 4 Plug-in/sdks/4.0.0beta2/frameworks/flex-config.xml [mxmlc] Exception in thread "Image Fetcher 0" java.lang.OutOfMemoryError: Java heap space [mxmlc] at java.awt.image.PixelGrabber.setDimensions(PixelGrabber.java:360) [mxmlc] at sun.awt.image.ImageDecoder.setDimensions(ImageDecoder.java:62) [mxmlc] at sun.awt.image.JPEGImageDecoder.sendHeaderInfo(JPEGImageDecoder.java:71) [mxmlc] at sun.awt.image.JPEGImageDecoder.readImage(Native Method) [mxmlc] at sun.awt.image.JPEGImageDecoder.produceImage(JPEGImageDecoder.java:119) [mxmlc] at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:246) [mxmlc] at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172) [mxmlc] at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136) [mxmlc] /src/com/amtrak/components/map/MapAsset.mxml: Error: exception during transcoding: Failed to grab pixels for image /src/assets/embed_assets/images/zoomed_map_wide.jpg [mxmlc] [mxmlc] /src/com/amtrak/components/map/MapAsset.mxml: Error: Unable to transcode /assets/embed_assets/images/zoomed_map_wide.jpg. [mxmlc] [mxmlc] Error: Java heap space [mxmlc] [mxmlc] java.lang.OutOfMemoryError: Java heap space [mxmlc] at java.util.ArrayList.<init>(ArrayList.java:112) [mxmlc] at macromedia.asc.util.ObjectList.<init>(ObjectList.java:30) [mxmlc] at macromedia.asc.parser.ArgumentListNode.<init>(ArgumentListNode.java:30) [mxmlc] at macromedia.asc.parser.NodeFactory.argumentList(NodeFactory.java:116) [mxmlc] at macromedia.asc.parser.NodeFactory.argumentList(NodeFactory.java:97) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.generateBinding(ImplementationGenerator.java:563) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetupFunction(ImplementationGenerator.java:864) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetup(ImplementationGenerator.java:813) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.generateInitializerSupportDefs(ImplementationGenerator.java:1813) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.generateClassDefinition(ImplementationGenerator.java:1005) [mxmlc] at flex2.compiler.mxml.ImplementationGenerator.<init>(ImplementationGenerator.java:201) [mxmlc] at flex2.compiler.mxml.ImplementationCompiler.generateImplementationAST(ImplementationCompiler.java:498) [mxmlc] at flex2.compiler.mxml.ImplementationCompiler.parse1(ImplementationCompiler.java:196) [mxmlc] at flex2.compiler.mxml.MxmlCompiler.parse1(MxmlCompiler.java:168) [mxmlc] at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2851) [mxmlc] at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2804) [mxmlc] at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:446) [mxmlc] at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274) [mxmlc] at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1488) [mxmlc] at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1375) [mxmlc] at flex2.tools.Mxmlc.mxmlc(Mxmlc.java:282) [mxmlc] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [mxmlc] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [mxmlc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [mxmlc] at java.lang.reflect.Method.invoke(Method.java:597) [mxmlc] at flex.ant.FlexTask.executeInProcess(FlexTask.java:280) [mxmlc] at flex.ant.FlexTask.execute(FlexTask.java:225) [mxmlc] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288) [mxmlc] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [mxmlc] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [mxmlc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [mxmlc] at java.lang.reflect.Method.invoke(Method.java:597) BUILD FAILED /src/build.xml:49: mxmlc task failed

  Read the article

• Linux DNS Multi tenant

  - by spicyramen

  I need to setup a multi-tenant DNS solution in Linux DNS Server. Currently I serve multiple companies: Company ABC, Company XYZ, etc... I need to create a) Forwarder zone b) Reverse Forward Zone. I can easily create a Forward Zone with domain abc.com The challenge I have is that each of my customer components share the same IP address. Hence If I create the Reverse Forward Zone I end up with something like this: abc.com 1.1.1.1 host.abc.com xyz.com 1.1.1.1 host.xyz.com If I perform a reverse lookup on host.abc.com it works fine...but if I do a reverse lookup on 1.1.1.1 I get a load balance response of: attempt: host.abc.com attempt: host.xyz.com attempt: host.abc.com Any ideas? I want to add logic to the DNS configuration to handle DNS reverse lookup based on source machine and respond with right hostname. Workaround: Create multiple DNS but this is not scalable.

  Read the article

• Not able to find IIS Manager and enable IIS in Windows7 Home Basic

  - by Akshay

  I enabled IIS services in the add/remove windows components. However, when i want to open the manager, the IIS Manager does not appear under the administrative tools on the control panel. If i type the shortcut "inetmgr" into the run block it doesn't find it. However, i know the service installed correctly. It is a very frustrating problem since everyone says find it here or here but no one gives any help on what to do if is doesn't appear in the said locations at all. Can anyone please help me? The system i am using is Windows 7 home basic. The service installed correctly but i cannot find the IIS Manager.

  Read the article

• Laptop LCD Screen Flickering

  - by BSchlinker

  I recognize this is most likely not a software error and likely lies in one of the hardware components. However, about 3 months ago I replaced the LCD screen on this laptop. The company which I bought it through provided a 12 month warranty. Before I contact them, I would like to verify that the problem is most likely the LCD screen and not the inverter. Any comments? I recognize its impossible to diagnose hardware remotely, but it would be nice to know if there is a high probability it could be a component other then the LCD screen.

  Read the article

• Dynamic group membership to work around no nested security group support for Active Directory

  - by Bernie White

  My problem is that I have a number of network administration applications like SAN switches that do not support nested groups from Active Directory Domain Services (AD DS). These legacy administration applications use either LDAP or LDAPS. I am fairly sure I can use Active Directory Lightweight Directory Services (AD LDS) and possibly Windows Authorization Manager to work around this issue; however I am not really sure where to start. I want to end up with: A single group that can be queried over LDAP/LDAPS for all it’s direct members LDAP proxy for user name and password credentials to AD DS Easy way to admin the group, ideally the group would aggregate the nested membership in AD DS. a native solution using freely available components from the Windows stack. If you have any suggestions or solutions that you have previously used to solve this issue please let me know.

  Read the article

• No "Terminal Services" branch in "Group Policy Object Editor"

  - by ayavilevich

  Hi, We have several identical several servers in a hosting company. They run Windows 2003 R2 Std SP2 64bit. The servers are not in a domain. We have recently received a new server with the same configuration and hardware. However, the new server is different in some way. When we run "gpedit.msc /s" there are much less options in the tree than the other servers. Specifically we are missing the configuration of "Terminal Services". Many other items are missing under "Administrative templates" and "Windows components". Screenshot of correct server: (can't post link due to SF policy) Screenshot of new server: http://img686.imageshack.us/img686/572/gpowindowscomponentstp5.png What should we try? Thanks, Arik.

  Read the article

• Can a power failure or forceful shutdown damage hardware?

  - by Vilx-

  In an unrelated Internet forum I got into a discussion about hardware damage from forceful shutdowns (holding the power button for 5 seconds) and power failures. I was in the opinion that normal PC hardware does not suffer from this - after all, it's not much different than what they experience under a standard shutdown. But another person thought that it could do physical harm to the hard drive and possibly other components as well. He also said that the journaling features of filesystems are useless in face of power failures and were intended to help mitigate damage from system crashes. Now... I think this is nonsense, but then again I lack the experience and knowledge to say it with certainty. Perhaps someone else is more knowledgeable in this area and can shed light on this burning issue? :)

  Read the article

• portable cross-platform WebDAV Client

  - by theduke

  I am looking for a portable application that will allow me to do this: Browse a WebDAV share and open a file. Edit the file locally. Save the file, and automatically propagate the change to WebDAV. Is there any CROSS-PLATFORM application out there that will let me do this and exists as a portable? The reason I need this functionality is that I regularily have to access files via WebDAV from public machines where I do not have the neccessary permissions to natively mount a webdav share, or to install the neccessary components.

  Read the article

• SAN typical MTBF

  - by Adrian K

  We're using a SAN on a project at work, and there's a bit of debate around the fact that's technically it's a Single Point of Failure. No one seems to have any hard data. The SAN in question is a single physical box, but with internal redundant components (sorry - not sure3 what level of RAID it has, but I can find out). What's the tyopical MTBF for a SAN? The PM has it down on the projects risk register as "Quite Common' - I've never heard of a SAN going down, but I don't jhave any stats to show how likely it really is. Does anyone have any helpful info?

  Read the article

• Error in loading component property (Swing GUI Forms)

  - by Christo Du Preez

  For no apparent reason all my Swing GUI forms using components linked to org.jdesktop.beansbinding.Converter started generating errors when trying to open the Design View: Error Error in loading component property: [JPanel]-filterTextField-converter. Cannot load property type class org.jdesktop.beansbinding.Converter. The property cannot be loaded. Errors occurred in loading... I'm currently using Netbeans 6.8. I opened my project in Netbeans 6.7.1 and all was fine but after a while the same thing happened. Looking at the .form and .java files and comparing it to previous backups, everything looks fine. Even my Netbeans tutorial project no longer works. What can cause this. Any suggestions would greatly be appreciated. After further investigation this is taken from my IDE's log : INFO: msg org.openide.ErrorManager$AnnException: msg at org.openide.ErrorManager$AnnException.findOrCreate(ErrorManager.java:867) at org.openide.ErrorManager$DelegatingErrorManager.annotate(ErrorManager.java:650) at org.netbeans.modules.form.GandalfPersistenceManager.annotateException(GandalfPersistenceManager.java:230) at org.netbeans.modules.form.GandalfPersistenceManager.annotateException(GandalfPersistenceManager.java:240) at org.netbeans.modules.form.GandalfPersistenceManager.getPropertyType(GandalfPersistenceManager.java:2362) at org.netbeans.modules.form.GandalfPersistenceManager.loadProperty(GandalfPersistenceManager.java:2041) at org.netbeans.modules.form.GandalfPersistenceManager.loadBindingProperties(GandalfPersistenceManager.java:2627) at org.netbeans.modules.form.GandalfPersistenceManager.loadComponent(GandalfPersistenceManager.java:900) at org.netbeans.modules.form.GandalfPersistenceManager.restoreComponent(GandalfPersistenceManager.java:845) at org.netbeans.modules.form.GandalfPersistenceManager.loadComponent(GandalfPersistenceManager.java:979) at org.netbeans.modules.form.GandalfPersistenceManager.restoreComponent(GandalfPersistenceManager.java:845) at org.netbeans.modules.form.GandalfPersistenceManager.loadNonVisuals(GandalfPersistenceManager.java:695) at org.netbeans.modules.form.GandalfPersistenceManager.loadForm(GandalfPersistenceManager.java:529) at org.netbeans.modules.form.GandalfPersistenceManager.loadForm(GandalfPersistenceManager.java:290) at org.netbeans.modules.form.FormEditor$3.run(FormEditor.java:339) at org.netbeans.modules.form.FormLAF$2.run(FormLAF.java:287) at org.openide.util.Mutex.doEventAccess(Mutex.java:1355) at org.openide.util.Mutex.readAccess(Mutex.java:317) at org.netbeans.modules.form.FormLAF.executeWithLookAndFeel(FormLAF.java:272) at org.netbeans.modules.form.FormEditor.loadFormData(FormEditor.java:337) at org.netbeans.modules.form.FormEditor.loadForm(FormEditor.java:266) at org.netbeans.modules.form.FormEditorSupport.loadForm(FormEditorSupport.java:306) at org.netbeans.modules.form.FormEditorSupport$3.run(FormEditorSupport.java:457) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEvent(EventQueue.java:597) at org.netbeans.core.TimableEventQueue.dispatchEvent(TimableEventQueue.java:125) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) Caused by: java.lang.ClassNotFoundException: Will not load class org.jdesktop.beansbinding.Converter arbitrarily from one of ModuleCL@738d08[org.jdesktop.beansbinding] and ModuleCL@167e3a5[javax.beans.binding] starting from SystemClassLoader[556 modules]; see http://wiki.netbeans.org/DevFaqModuleCCE at org.netbeans.ProxyClassLoader.loadClass(ProxyClassLoader.java:241) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at org.netbeans.modules.form.project.FormClassLoader.findClass(FormClassLoader.java:83) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at org.netbeans.modules.form.project.ClassPathUtils.loadClass(ClassPathUtils.java:95) at org.netbeans.modules.form.FormUtils.loadClass(FormUtils.java:1445) at org.netbeans.modules.form.PersistenceObjectRegistry.loadClass(PersistenceObjectRegistry.java:95) at org.netbeans.modules.form.GandalfPersistenceManager.getClassFromString(GandalfPersistenceManager.java:5516) at org.netbeans.modules.form.GandalfPersistenceManager.getPropertyType(GandalfPersistenceManager.java:2348) ... 27 more msg Error in loading component property: Other Components-mainPanel-jTextField1-converter Cannot load property type class org.jdesktop.beansbinding.Converter. The property cannot be loaded. Can someone please help me with this issue. This is still not resolved and not being able to edit my Forms or loosing binding properties every time I need to edit a Form is a real pain and time consuming! Any help would greatly be appreciated. Thanx.

  Read the article

• What version of SCO Open Server are guys using out there and on what hardware?

  - by Gath

  I have some old applications which are running on SCO Open Server 5.0.5, and i would love to move them to SCO Open Server 5.0.7 and on modern hardware(servers), currently am running SCO on old IBM PL 300 personal computer, on 92MB Memory, one processor, and it has been serving the clients pretty well. Now i have New Modern IBM xseries Servers and i would love to migrate the same applications to those new servers. Problem is, SCO 5.0.5 is unable to detect some of the hardware components in the new servers. I read somewhere that SCO 5.0.7 is able to detect the newer hardware even the USB ports etc. Is there anyone running SCO Openserver out there, and on what hardware architecture are they running on? Gath

  Read the article

• Could we build a mega-processor out of superconductors?

  - by Carson Myers

  A superconductor, once cooled below a critical temperature, loses all of its electrical resistance and therefore becomes 100% efficient. This means that when a current flows through a superconductor, none of the energy is lost to heat or light. Theoretically, could we build a processor out of superconductive materials, that could effectively run at, oh I don't know, say, 300ghz? or 5,000ghz? Since a superconductive circuit is 100% efficient, this means that once supplied with electricity, the source of power could be completely removed from the circuit and the current would continue to flow forever. So if we made all the components inside a computer out of superconductive materials, could we get away with only supplying power to the peripherals and save a-whole-lot on energy, while dramatically increasing computing speed? Might this be one of the next big breakthroughs in computing? What do you think?

  Read the article

• What is the best memory supported by Asus Rampage Formula (1) motherboard

  - by James

  I'm rebuilding a PC from old components I have and I want to know what are the best ram sticks for the Asus Rampage Formula (The first motherboard in the Rampage Formula range) According to the Asus website (HERE) the maximum supported memory is 8GB but when I search through the memory compatibility list there's nothing above 2046mb and the motherboard only supports single or dual-channel memory. Can anyone point me in the direction of a more comprehensive list of compatible memory? Or does anyone know where I can ask about memory compatibility? Note: As far as I know, this model motherboard is no longer in production.

  Read the article

• Server only powers (but doesn't POST) when IDE drive is powered

  - by Jookia

  So after a thunderstorm last night which did a little damage, a Gigabyte server has decided it's going on power on but not POST. If it is POSTing, it's doing a very bad job at telling me. No beeps, nothing. Power seems to reach the components though. CD Drive opens and closes. So after stripping it back, I've found that the difference between this behaviour and deciding it's not going to power on for more than half a second, is having a power cable plugged in to one of the IDE hard drives. Is this normal, or a sign that the PSU has had it?

  Read the article

• Windows boots to Black Screen of Death — Is my HDD faulty?

  - by Flynn1179

  My wife's PC suddenly stopped booting up properly. It gets as far as the Windows 'loading' screen with the bar scrolling away, but that's as far as it gets for some time, then suddenly flashes up a BSoD barely long enough to see, then the display cuts out. We've got identical PCs, and after swapping components, I established that my PC suffers the same problem if I swap in the HDD. Even if I plug hers in as a second HDD on my machine, it still does the same thing, even though it's booting from mine. I can't even boot her machine from CD or DVD either, so I couldn't even use a recovery disc. I did manage to partially boot my PC into safe mode with the other HDD attached, and it got as far as loading 'crcdisk.sys' and froze. Anybody know what could be wrong with it, or at least how I can get the data off the disk? I'm assuming there's still data on the disk, given that it at least shows me the vista 'loading' screen.

  Read the article

• Oracle Enterprise Manager Logs

  - by idea_

  Hi, I'm attempting to investigate the root cause of the following error which occurs each time a users call an Oracle 10g Forms applet: FRM-92102: A network error has occurred. The Forms Client has attempted to reestablish its connection to the Server 1 time(s) without success. Please check the network connection and try again later. Details... Java Exception: java.io.IOException: Connection failure with 503 This error remained after restarting all my system components: HTTP_Server, OC4J_BI_Forms, Web Cache, Reports Server, etc. The only way to clear this issue was to restart the server entirely. During the downtime, web pages were rendered with the PL/SQL cartridge and being served, so it appears as though this was isolated to forms. Does anybody know which log files may provide clues here? Any help would be much appreciated :) Update: If somebody can provide me with a way or reference to increase the capacity of my web server to minimize these errors, I will accept this as the solution.

  Read the article

• zabbix 2.2.1 no graphs in Web scenario

  - by Mick

  Hello for some time I have a problem with graphs in web scenarios on Zabbix 2.2.1, I put below the screen, this problem has appeared at every graph of web scenario This same scenario installed a second zabbixie that runs on my local virtual machine with zabbix. In my local machine all components of zabbix (server, frontend, agents), but in my production zabbix only zabbix frontend are separated from each other. Scenario for openerp ============================== Name: OpenERP Web Checks Application: New application: Authentication: Update interval (in sec): 60 Retries: 1 Agent: Internet Explorer 10.0 Steps: ============================== Name: OpenERP login page URL: http://openerp.test.com Post: Variables: Timeout: 15 Required string: Required status codes: 200 My zabbix server performance: Anybody have some idea how fix it ? Regards Mick

  Read the article

• Does liquid cooling mean I no longer need to dust my machine?

  - by Starkers

  I've got two long haired cats, a dog and I live with a smoker. I use my computer pretty much all day everday, and though I put it to sleep in the night, those fans are constantly going during the day. In just 6 months the rear fans have so much hair wrapped around them it looks more like something from a vacuum cleaner rather than electronic equipment! Due to this, I'm interested in liquid cooling. However, it appears that liquid cooled systems have fans and liquid cooling? Are those just hybrid solutions? They wouldn't really help my situation. There does appear to be fanless systems that use a radiator to dissipate heat. If I implemented one of these could I seal up the vents on my PC and never have to dust it again? Is there a disadvantage to fanless liquid cooling? I don't need to overclock at the moment but I ever want to push my components will fanless liquid cooling be pretty rubbish?

  Read the article

• How to disable Tcp/Ip settings in windows 7 via GPO?

  - by Akash Kava

  I have enabled following policies, "Prohibit TCP/IP advanced connection" "Prohibit access to properties of components of a LAN connection" "Enable Windows 2000 Network Connections setings for Administrators" after doing all these, all machines running windows xp, 2000 and vista have network settings properties button disabled as expected. However all machines running windows 7 have no effect, I believe there are few more steps, all Windows 7 machines are on domain and we want to control this via Domain Controler's GPO. Please let me know, what I need to do to have Windows 7 disable the properties of network connection, I am not network expert, I read few articles about what new has been added in GPO of windows 7 but I am blank. Everything works fine on Windows XP, Vista, 2003 Server. Only Windows 7 is a problem.

  Read the article

• How to trigger cross-platform jobs between Windows and Unix

  - by andyb

  I have an application which has components on Windows and Unix. I need to run overnight jobs which initiate tasks/jobs on both environment. These need to be sequenced so I cannot simple use Cron / Task Scheduler. For each job, there will be a controlling script either on Windows or Unix, but this script will need to initiate jobs on the other environment and detect when they are complete and a success/failure code. In the past I have achieved this using 'flag files' on a samba share. This worked but required 'polling' behaviour on the receiving end which I do not consider optimal. I would prefer not to have to embed user credentials in script if possible.

  Read the article

• Mandatory Profiles on a Server 2003 TS Box

  - by Chloe

  I have a Windows Server 2003 box which will be acting as a terminal server. It will actually be running Citrix, but I don't believe that to be relevant here. There has been a request for every user to use a single mandatory profile. I've used mandatory profiles before, but there have been generally different profiles for different users so I've always used the "Terminal Services Profile" tab to good effect. What I'd like this time is a single setting, such as a Group Policy or similar that simply forces every non-domain admin user logging on to the box into using the mandatory profile. We'll be using Folder Redirection to take care of everything else. I'm aware of the following GPO: Computer Policy\Computer Configuration\Administrative Templates\Windows Components/Terminal Services Set path for TS Roaming Profiles But, as that's a computer policy, will it not apply to all users including administrators? If so, is it possible to exclude admins somehow?

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >