Search Results

Search found 2509 results on 101 pages for 'converting'.

Page 94/101 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • casting doubles to integers in order to gain speed

    - by antirez
    Hello all, in Redis (http://code.google.com/p/redis) there are scores associated to elements, in order to take this elements sorted. This scores are doubles, even if many users actually sort by integers (for instance unix times). When the database is saved we need to write this doubles ok disk. This is what is used currently: snprintf((char*)buf+1,sizeof(buf)-1,"%.17g",val); Additionally infinity and not-a-number conditions are checked in order to also represent this in the final database file. Unfortunately converting a double into the string representation is pretty slow. While we have a function in Redis that converts an integer into a string representation in a much faster way. So my idea was to check if a double could be casted into an integer without lost of data, and then using the function to turn the integer into a string if this is true. For this to provide a good speedup of course the test for integer "equivalence" must be fast. So I used a trick that is probably undefined behavior but that worked very well in practice. Something like that: double x = ... some value ... if (x == (double)((long long)x)) use_the_fast_integer_function((long long)x); else use_the_slow_snprintf(x); In my reasoning the double casting above converts the double into a long, and then back into an integer. If the range fits, and there is no decimal part, the number will survive the conversion and will be exactly the same as the initial number. As I wanted to make sure this will not break things in some system, I joined #c on freenode and I got a lot of insults ;) So I'm now trying here. Is there a standard way to do what I'm trying to do without going outside ANSI C? Otherwise, is the above code supposed to work in all the Posix systems that currently Redis targets? That is, archs where Linux / Mac OS X / *BSD / Solaris are running nowaday? What I can add in order to make the code saner is an explicit check for the range of the double before trying the cast at all. Thank you for any help.

    Read the article

  • Delegates does not work properly

    - by Warrior
    I am new to iPhone development. I am converting the date to the desired format and set it to the delegate and get its value in the another view. The session restarts when I tried to get the value from delegate. If I set the original date and not the formatted date in the set delegate, then i able to get the value in the another view. If I also give any static string value, then also I am able to the static string value back. Only the formatted date which is string is set then the session restarts. If i print and check the value of the formatted date it prints the correct formatted date only.Please help me out.Here is my code for date conversion NSString *dateval=[[stories objectAtIndex: storyIndex] objectForKey:@"date"]; NSDateFormatter *inputFormatter = [[NSDateFormatter alloc] init]; [inputFormatter setDateFormat:@"EEE, MMM dd, yyyy"]; NSDate *inputDate = [inputFormatter dateFromString:dateval]; NSDateFormatter *outputFormatter = [[NSDateFormatter alloc] init]; [outputFormatter setDateFormat:@"MMMM dd"]; NSString *outputDate = [outputFormatter stringFromDate:inputDate]; AppDelegate *delegate=(AppDelegate *)[[UIApplication sharedApplication]delegate]; [delegate setCurrentDates:outputDate]; EDIT: This is displayed in console inside view did load [Session started at 2010-04-21 19:12:53 +0530.] GNU gdb 6.3.50-20050815 (Apple version gdb-967) (Tue Jul 14 02:11:58 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 4216. (gdb) In another view - (void)viewDidLoad { NSLog(@"inside view did load"); AppDelegate *delegate=(AppDelegate *)[[UIApplication sharedApplication]delegate]; NSString *titleValue=[delegate getCurrentDates]; self.navigationItem.title =titleValue ; } The get does not work properly.It works fine if i give any static string or the "dateval". Thanks.

    Read the article

  • populate CoreData data model from JSON files prior to app start

    - by johannes_d
    I am creating an iPad App that displays data I got from an API in JSON format. My Core Data model has several entities(Countries, Events, Talks, ...). For each entity I have one .json file that contains all instances of the entity and its attributes as well as its relationships. I would like to populate my Core Data data model with these entities before the start of the App (otherwise it takes about 15 minutes for the iPad to create all the instances of the entities from the several JSON files using factory methods). I am currently importing the data into CoreData like this: -(void)fetchDataIntoDocument:(UIManagedDocument *)document { dispatch_queue_t dataQ = dispatch_queue_create("Data import", NULL); dispatch_async(dataQ, ^{ //Fetching data from application bundle NSURL *tedxgroupsurl = [[NSBundle mainBundle] URLForResource:@"contries" withExtension:@"json"]; NSURL *tedxeventsurl = [[NSBundle mainBundle] URLForResource:@"events" withExtension:@"json"]; //converting the JSON files to NSDictionaries NSError *error = nil; NSDictionary *countries = [NSJSONSerialization JSONObjectWithData:[NSData dataWithContentsOfURL:countriesurl] options:kNilOptions error:&error]; countries = [countries objectForKey:@"countries"]; NSDictionary *events = [NSJSONSerialization JSONObjectWithData:[NSData dataWithContentsOfURL:eventsurl] options:kNilOptions error:&error]; events = [events objectForKey:@"events"]; //creating entities using factory methods in NSManagedObject Subclasses (Country / Event) [document.managedObjectContext performBlock:^{ NSLog(@"creating countries"); for (NSDictionary *country in countries) { [Country countryWithCountryInfo:country inManagedObjectContext:document.managedObjectContext]; //creating Country entities } NSLog(@"creating events"); for (NSDictionary *event in events) { [Event eventWithEventInfo:event inManagedObjectContext:document.managedObjectContext]; // creating Event entities } NSLog(@"done creating, saving document"); [document saveToURL:document.fileURL forSaveOperation:UIDocumentSaveForOverwriting completionHandler:NULL]; }]; }); dispatch_release(dataQ); } This combines the different JSON files into one UIManagedDocument which i can then perform fetchRequests on to populate tableViews, mapView, etc. I'm looking for a way to create this document outside my application & add it to the mainBundle. Then I could copy it once to the apps DocumentsDirectory and be able I use it (instead of creating the Document within the app from the original JSON files). Any help is appreciated!

    Read the article

  • Wordpress Events List Date Problem

    - by Roger
    Hi, I'm having a problem displaying events in the correct order in wordpress. I think the problem is because wordpress is treating the date as a string and ordering it by the day because it's in british date format. The goal is to display a list of future events with the most current event at the top of the list. But I must use the british date format of dd/mm/yyyy. Do I need to go back to the drawing board or is there a way of converting the date to achieve the result I need? Thanks in advance :) <ul> <?php // Get today's date in the right format $todaysDate = date('d/m/Y');?> <?php query_posts('showposts=50&category_name=Training&meta_key=date&meta_compare=>=&meta_value=' . $todaysDate . '&orderby=meta_value&order=ASC'); ?> <?php if (have_posts()) : while (have_posts()) : the_post(); ?> <li> <h3><a href="<?php the_permalink(); ?>"> <?php the_title(); ?> </a></h3> <?php $getDate = get_post_meta($post->ID, 'date', TRUE); $dateArray = explode('/', $getDate); ?> <?php if($getDate != '') { ?> <div class="coursedate rounded"><?php echo date('d F Y', mktime(0, 0, 0, $dateArray[1], $dateArray[0], $dateArray[2])); ?></div> <?php } ?> <p><?php get_clean_excerpt(140, get_the_content()); ?>...</p> <p><strong><a class="link" href="<?php the_permalink(); ?>">For further details and booking click here</a></strong></p> </li> <?php endwhile; ?> <?php else : ?> <li>Sorry, no upcoming events!</li> <?php endif; ?>

    Read the article

  • Zend Framework-where should this root.php file go for MVC?

    - by Joel
    Hi guys, I'm converting over a web-app to use the MVC structure of Zend Framework. I have a root.php include file that contains most of the database info, and some static variables that are used in the program. I'm not sure if some of this should be in the application.ini of in a model that is called by the init() function in a controller, or in the bootstrap or what? Any help would be much appreciated! root.php (include file at the top of every php page): <?php /*** //Configuration file */ ## Site Configuration starts ## define("SITE_ROOT" , dirname(__FILE__)); define("SITE_URL" , "http://localhost/monkeycalendarapp/monkeycalendarapp/public"); define('DB_HOST', "localhost"); define('DB_USER', "root"); define('DB_PASS', "xxx"); define('DB_NAME', "xxxxx"); define("PROJECT_NAME" , "Monkey Mind Manager (beta 2.2)"); //site title define("CALENDAR_WIDTH" , "300"); //left mini calendar width define("CALENDAR_HEIGHT" , "150"); //left mini calendar height $page_title = 'Event List'; $stylesheet_name = 'style.css'; //default stylesheet define("SITE_URL_AJAX" , SITE_URL . "/ajax-tooltip"); define("JQUERY" , SITE_URL . "/jquery-ui-1.7.2"); $a_times = array("12:00","12:30","01:00","01:30","02:00","02:30","03:00","03:30","04:00","04:30","05:00","05:30","06:00","06:30","07:00","07:30","08:00","08:30","09:00","09:30","10:00","10:30","11:00","11:30"); //PTLType Promotional timeline type $a_ptlType= array(1=>"Gigs","To-Do","Completed"); $a_days = array("Su","Mo","Tu","We","Th","Fr","Sa"); $a_timesMerd = array("12:00am","12:30am","01:00am","01:30am","02:00am","02:30am","03:00am","03:30am","04:00am","04:30am","05:00am","05:30am","06:00am","06:30am","07:00am","07:30am","08:00am","08:30am","09:00am","09:30am","10:00am","10:30am","11:00am","11:30am","12:00pm","12:30pm","01:00pm","01:30pm","02:00pm","02:30pm","03:00pm","03:30pm","04:00pm","04:30pm","05:00pm","05:30pm","06:00pm","06:30pm","07:00pm","07:30pm","08:00pm","08:30pm","09:00pm","09:30pm","10:00pm","10:30pm","11:00pm","11:30pm"); //Setting stylesheet for this user. $AMPM=array("am"=>"am","pm"=>"pm"); include(SITE_ROOT . "/includes/functions/general.php"); include(SITE_ROOT . "/includes/db.php"); session_start(); if(isset($_SESSION['userData']['UserID'])) { $s_userID = $_SESSION['userData']['UserID']; } $stylesheet_name = stylesheet(); ini_set('date.timezone', 'GMT'); date_default_timezone_set('GMT'); if($s_userID) { ini_set('date.timezone', $_SESSION['userData']['timezone']); date_default_timezone_set($_SESSION['userData']['timezone']); } ?>

    Read the article

  • How would you structure your entity model for storing arbitrary key/value data with different data t

    - by Nathan Ridley
    I keep coming across scenarios where it will be useful to store a set of arbitrary data in a table using a per-row key/value model, rather than a rigid column/field model. The problem is, I want to store the values with their correct data type rather than converting everything to a string. This means I have to choose either a single table with multiple nullable columns, one for each data type, or a set of value tables, one for each data type. I'm also unsure as to whether I should use full third normal form and separate the keys into a separate table, referencing them via a foreign key from the value table(s), or if it would be better to keep things simple and store the string keys in the value table(s) and accept the duplication of strings. Old/bad: This solution makes adding additional values a pain in a fluid environment because the table needs to be modified regularly. MyTable ============================ ID Key1 Key2 Key3 int int string date ---------------------------- 1 Value1 Value2 Value3 2 Value4 Value5 Value6 Single Table Solution This solution allows simplicity via a single table. The querying code still needs to check for nulls to determine which data type the field is storing. A check constraint is probably also required to ensure only one of the value fields contains non-nulll data. DataValues ============================================================= ID RecordID Key IntValue StringValue DateValue int int string int string date ------------------------------------------------------------- 1 1 Key1 Value1 NULL NULL 2 1 Key2 NULL Value2 NULL 3 1 Key3 NULL NULL Value3 4 2 Key1 Value4 NULL NULL 5 2 Key2 NULL Value5 NULL 6 2 Key3 NULL NULL Value6 Multiple-Table Solution This solution allows for more concise purposing of each table, though the code needs to know the data type in advance as it needs to query a different table for each data type. Indexing is probably simpler and more efficient because there are less columns that need indexing. IntegerValues =============================== ID RecordID Key Value int int string int ------------------------------- 1 1 Key1 Value1 2 2 Key1 Value4 StringValues =============================== ID RecordID Key Value int int string string ------------------------------- 1 1 Key2 Value2 2 2 Key2 Value5 DateValues =============================== ID RecordID Key Value int int string date ------------------------------- 1 1 Key3 Value3 2 2 Key3 Value6 How do you approach this problem? Which solution is better? Also, should the key column be separated into a separate table and referenced via a foreign key or be should it be kept in the value table and bulk updated if for some reason the key name changes?

    Read the article

  • What are the steps to convert this function to a model/controller in Zend Framework?

    - by Joel
    Hi guys, I'm learning Zend Framework MVC, and I have a website that is mainly static php pages. However one of the pages is using functions, etc, and I'm trying to figure out what the process is for converting this to an OOP setup. Within the <body> I have this function (and more, but this is the first function): function filterEventDetails($contentText) { $data = array(); foreach($contentText as $row) { if(strstr($row, 'When: ')) { ##cleaning "when" string to get date in the format "May 28, 2009"## $data['duration'] = str_replace('When: ','',$row); list($when, ) = explode(' to ',$data['duration']); $data['when'] = substr($when,4); if(strlen($data['when'])>13) $data['when'] = trim(str_replace(strrchr($data['when'], ' '),'',$data['when'])); $data['duration'] = substr($data['duration'], 0, strlen($data['duration'])-4); //trimming time zone identifier (UTC etc.) } if(strstr($row, 'Where: ')) { $data['where'] = str_replace('Where: ','',$row); //pr($row); //$where = strstr($row, 'Where: '); //pr($where); } if(strstr($row, 'Event Description: ')) { $event_desc = str_replace('Event Description: ','',$row); //$event_desc = strstr($row, 'Event Description: '); ## Filtering event description and extracting venue, ticket urls etc from it. //$event_desc = str_replace('Event Description: ','',$contentText[3]); $event_desc_array = explode('|',$event_desc); array_walk($event_desc_array,'get_desc_second_part'); //pr($event_desc_array); $data['venue_url'] = $event_desc_array[0]; $data['details'] = $event_desc_array[1]; $data['tickets_url'] = $event_desc_array[2]; $data['tickets_button'] = $event_desc_array[3]; $data['facebook_url'] = $event_desc_array[4]; $data['facebook_icon'] = $event_desc_array[5]; } } return $data; } ?> So right now I have this in my example.phtml view page. I understand this needs to be a model and acted on by the controller, but I'm really not sure where to start with this conversion? This is a function tht is taking info from a Google calendar and parsing it for the view. Thanks for any help!

    Read the article

  • j2me or android file upload to jsp

    - by user313613
    hi i new to mobile development i like to upload the file from blackberry and android how to develop the mobile side to this jsp page. please do reply me thanks here i mention the jsp file from roseindia.net. <%@ page import="java.io.*" % <% //to get the content type information from JSP Request Header String contentType = request.getContentType(); //here we are checking the content type is not equal to Null and as well as the passed data from mulitpart/form-data is greater than or equal to 0 if ((contentType != null) && (contentType.indexOf("multipart/form-data") = 0)) { DataInputStream in = new DataInputStream(request. getInputStream()); //we are taking the length of Content type data int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead, formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1, contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)) .getBytes()).length; // creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream(saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); %><Br><table border="2"><tr><td><b>You have successfully upload the file by the name of: <% out.println(saveFile); % <% } %

    Read the article

  • How to send a Java integer in four bytes to another application?

    - by user1468729
    public void routeMessage(byte[] data, int mode) { logger.debug(mode); logger.debug(Integer.toBinaryString(mode)); byte[] message = new byte[8]; ByteBuffer byteBuffer = ByteBuffer.allocate(4); ByteArrayOutputStream baoStream = new ByteArrayOutputStream(); DataOutputStream doStream = new DataOutputStream(baoStream); try { doStream.writeInt(mode); } catch (IOException e) { logger.debug("Error converting mode from integer to bytes.", e); return; } byte [] bytes = baoStream.toByteArray(); bytes[0] = (byte)((mode >>> 24) & 0x000000ff); bytes[1] = (byte)((mode >>> 16) & 0x000000ff); bytes[2] = (byte)((mode >>> 8) & 0x00000ff); bytes[3] = (byte)(mode & 0x000000ff); //bytes = byteBuffer.array(); for (byte b : bytes) { logger.debug(b); } for (int i = 0; i < 4; i++) { //byte tmp = (byte)(mode >> (32 - ((i + 1) * 8))); message[i] = bytes[i]; logger.debug("mode, " + i + ": " + Integer.toBinaryString(message[i])); message[i + 4] = data[i]; } broker.routeMessage(message); } I've tried different ways (as you can see from the commented code) to convert the mode to four bytes to send it via a socket to another application. It works well with integers up to 127 and then again with integers over 256. I believe it has something to do with Java types being signed but don't seem to get it to work. Here are some examples of what the program prints. 127 1111111 0 0 0 127 mode, 0: 0 mode, 1: 0 mode, 2: 0 mode, 3: 1111111 128 10000000 0 0 0 -128 mode, 0: 0 mode, 1: 0 mode, 2: 0 mode, 3: 11111111111111111111111110000000 211 11010011 0 0 0 -45 mode, 0: 0 mode, 1: 0 mode, 2: 0 mode, 3: 11111111111111111111111111010011 306 100110010 0 0 1 50 mode, 0: 0 mode, 1: 0 mode, 2: 1 mode, 3: 110010 How is it suddenly possible for a byte to store 32 bits? How could I fix this?

    Read the article

  • Optimizing sparse dot-product in C#

    - by Haggai
    Hello. I'm trying to calculate the dot-product of two very sparse associative arrays. The arrays contain an ID and a value, so the calculation should be done only on those IDs that are common to both arrays, e.g. <(1, 0.5), (3, 0.7), (12, 1.3) * <(2, 0.4), (3, 2.3), (12, 4.7) = 0.7*2.3 + 1.3*4.7 . My implementation (call it dict) currently uses Dictionaries, but it is too slow to my taste. double dot_product(IDictionary<int, double> arr1, IDictionary<int, double> arr2) { double res = 0; double val2; foreach (KeyValuePair<int, double> p in arr1) if (arr2.TryGetValue(p.Key, out val2)) res += p.Value * val2; return res; } The full arrays have about 500,000 entries each, while the sparse ones are only tens to hundreds entries each. I did some experiments with toy versions of dot products. First I tried to multiply just two double arrays to see the ultimate speed I can get (let's call this "flat"). Then I tried to change the implementation of the associative array multiplication using an int[] ID array and a double[] values array, walking together on both ID arrays and multiplying when they are equal (let's call this "double"). I then tried to run all three versions with debug or release, with F5 or Ctrl-F5. The results are as follows: debug F5: dict: 5.29s double: 4.18s (79% of dict) flat: 0.99s (19% of dict, 24% of double) debug ^F5: dict: 5.23s double: 4.19s (80% of dict) flat: 0.98s (19% of dict, 23% of double) release F5: dict: 5.29s double: 3.08s (58% of dict) flat: 0.81s (15% of dict, 26% of double) release ^F5: dict: 4.62s double: 1.22s (26% of dict) flat: 0.29s ( 6% of dict, 24% of double) I don't understand these results. Why isn't the dictionary version optimized in release F5 as do the double and flat versions? Why is it only slightly optimized in the release ^F5 version while the other two are heavily optimized? Also, since converting my code into the "double" scheme would mean lots of work - do you have any suggestions how to optimize the dictionary one? Thanks! Haggai

    Read the article

  • How can I construct this file tree based on what files the user is allowed to view?

    - by robert
    I have an array of files that looks like this: Array ( [0] => Array ( [type] => folder [path] => RootFolder ) [1] => Array ( [type] => file [path] => RootFolder\error.log ) [2] => Array ( [type] => folder [path] => RootFolder\test ) [3] => Array ( [type] => file [path] => RootFolder\test\asd.txt ) [4] => Array ( [type] => folder [path] => RootFolder\test\sd ) [5] => Array ( [type] => file [path] => RootFolder\test\sd\testing.txt ) ) I parse this array and create a tree like view based on the depth of the files ('/' count). It looks like this: RootFolder - error.log - test - asd.txt - sd - testing.txt What I have now is an array of filepaths the user is allowed to view. I need to take this array into account when constructing the above tree. That array looks like this: Array ( [0] => Array ( [filePath] => RootFolder\test\sd ) [1] => Array ( [filePath] => RootFolder\error.log ) ) It would be easy to do a if in_array($path, $allowed) but that won't give me the tree. Just a list of files... Another part I'm stumped on is this requirement: If the user has access to view the folder test, they then have access to all children of that folder. My idea was to simply parse the filepaths. For example, I'd confirm that RootFolder\test\sd was a directory and then create a tree based on the '/' count. Like I was doing earlier. Then, since this is a directory, I'd pull out all files within this directory and show them to the user. However, I'm having trouble converting this to working code... Any ideas?

    Read the article

  • how to create multiple tcp connections between server and client

    - by lowcosthighperformance
    I am new in Unix/Linux networking programming, so I have written server-client program in below.In this code there is one socket between client and server, client requests to server, then server responses from 1 to 100 numbers to client. So my question is how can we do this process with 3 socket( tcp connection) without using thread? ( e.g. First socket runs then second runs then third runs then first again .. ) Do you have any suggestion? Thank you client.c int main() { int sock; struct sockaddr_in sa; int ret; char buf[1024]; int x; sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_port = htons(SERVER_PORT); inet_pton (AF_INET, SERVER_IP, &sa.sin_addr); ret = connect (sock, (const struct sockaddr *) &sa,sizeof (sa)); if (ret != 0) { printf ("connect failed\n"); exit (0); } x = 0; while (x != -1) { read (sock, buf , sizeof(int)); x = ntohl(*((int *)buf)); if (x != -1) printf ("int rcvd = %d\n", x); } close (sock); exit (0); } server.c int main() { int list_sock; int conn_sock; struct sockaddr_in sa, ca; socklen_t ca_len; char buf[1024]; int i; char ipaddrstr[IPSTRLEN]; list_sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = htonl(INADDR_ANY); sa.sin_port = htons(SERVER_PORT); bind (list_sock,(struct sockaddr *) &sa,sizeof(sa)); listen (list_sock, 5); while (1){ bzero (&ca, sizeof(ca)); ca_len = sizeof(ca); // important to initialize conn_sock = accept (list_sock,(struct sockaddr *) &ca,&ca_len); printf ("connection from: ip=%s port=%d \n",inet_ntop(AF_INET, &(ca.sin_addr), ipaddrstr, IPSTRLEN),ntohs(ca.sin_port)); for (i=0; i<100; ++i){ *((int *)buf) = htonl(i+20); // we using converting to network byte order write (conn_sock, buf, sizeof(int)); } * ((int *)buf) = htonl(-1); write (conn_sock, buf, sizeof(int)); close (conn_sock); printf ("server closed connection to client\n"); } }

    Read the article

  • CUDA memory transfer issue

    - by Vaibhav Sundriyal
    I am trying to execute a code which first transfers data from CPU to GPU memory and vice-versa. In spite of increasing the volume of data, the data transfer time remains the same as if no data transfer is actually taking place. I am posting the code. #include <stdio.h> /* Core input/output operations */ #include <stdlib.h> /* Conversions, random numbers, memory allocation, etc. */ #include <math.h> /* Common mathematical functions */ #include <time.h> /* Converting between various date/time formats */ #include <cuda.h> /* CUDA related stuff */ #include <sys/time.h> __global__ void device_volume(float *x_d,float *y_d) { int index = blockIdx.x * blockDim.x + threadIdx.x; } int main(void) { float *x_h,*y_h,*x_d,*y_d,*z_h,*z_d; long long size=9999999; long long nbytes=size*sizeof(float); timeval t1,t2; double et; x_h=(float*)malloc(nbytes); y_h=(float*)malloc(nbytes); z_h=(float*)malloc(nbytes); cudaMalloc((void **)&x_d,size*sizeof(float)); cudaMalloc((void **)&y_d,size*sizeof(float)); cudaMalloc((void **)&z_d,size*sizeof(float)); gettimeofday(&t1,NULL); cudaMemcpy(x_d, x_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(y_d, y_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(z_d, z_h, nbytes, cudaMemcpyHostToDevice); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("\n %ld\t\t%f\t\t",nbytes,et); et=0.0; //printf("%f %d\n",seconds,CLOCKS_PER_SEC); // launch a kernel with a single thread to greet from the device //device_volume<<<1,1>>>(x_d,y_d); gettimeofday(&t1,NULL); cudaMemcpy(x_h, x_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(y_h, y_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(z_h, z_d, nbytes, cudaMemcpyDeviceToHost); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("%f\n",et); cudaFree(x_d); cudaFree(y_d); cudaFree(z_d); return 0; } Can anybody help me with this issue? Thanks

    Read the article

  • PHP array performance

    - by dfo
    Hi, this is my first question on Stackoverflow, please bear with me. I'm testing an algorithm for 2d bin packing and I've chosen PHP to mock it up as it's my bread-and-butter language nowadays. As you can see on http://themworks.com/pack_v0.2/oopack.php?ol=1 it works pretty well, but you need to wait around 10-20 seconds for 100 rectangles to pack. For some hard to handle sets it would hit the php's 30s runtime limit. I did some profiling and it shows that most of the time my script goes through different parts of a small 2d array with 0's and 1's in it. It either checks if certain cell equals to 0/1 or sets it to 0/1. It can do such operations million times and each times it takes few microseconds. I guess I could use an array of booleans in a statically typed language and things would be faster. Or even make an array of 1 bit values. I'm thinking of converting the whole thing to some compiled language. Is PHP just not good for it? If I do need to convert it to let's say C++, how good are the automatic converters? My script is just a lot of for loops with basic arrays and objects manipulations. Thank you! Edit. This function gets called more than any other. It reads few properties of a very simple object, and goes through a very small part of a smallish array to check if there's any element not equal to 0. function fits($bin, $file, $x, $y) { $flag = true; $xw = $x + $file->get_width();; $yh = $y + $file->get_height(); for ($i = $x; $i < $xw; $i++) { for ($j = $y; $j < $yh; $j++) { if ($bin[$i][$j] !== 0) { $flag = false; break; } } if (!$flag) break; } return $flag; }

    Read the article

  • nginx: problem configuring a proxy_pass

    - by Ofer Bar
    I'm converting a web app from apache to nginx. In apache's httpd.conf I have: ProxyPass /proxy/ http:// ProxyPassReverse /proxy/ http:// The idea is the client send this url: http://web-server-domain/proxy/login-server-addr/loginUrl.php?user=xxx&pass=yyy and the web server calls: http://login-server-addr/loginUrl.php?user=xxx&pass=yyy My nginx.conf is attached below and it is not working. At the moment it looks like it is calling the server, but returning an application error. This seems promising but any attempt to debug this failed! I can't trace any of the calls as nginx refuses to place them in the error file. Also, placing echo statement on the login server did not help either which is weird. The nginx documentation isn't very helpful about this. Any suggestion on how to configure a proxy_pass? Thanks! user nginx; worker_processes 1; #error_log /var/log/nginx/error.log; error_log /var/log/nginx/error.log notice; #error_log /var/log/nginx/error.log info; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; # # The default server # server { rewrite_log on; listen 80; server_name _; #charset koi8-r; #access_log logs/host.access.log main; #root /var/www/live/html; index index.php index.html index.htm; location ~ ^/proxy/(.*$) { #location /proxy/ { # rewrite ^/proxy(.*) http://$1 break; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering off; proxy_pass http://$1; #proxy_pass "http://173.231.134.36/messages_2.7.0/loginUser.php?userID=ofer.fly%40gmail.com&password=y4HTD93vrshMNcy2Qr5ka7ia0xcaa389f4885f59c9"; break; } location / { root /var/www/live/html; #if ( $uri ~ ^/proxy/(.*) ) { # proxy_pass http://$1; # break; #} #try_files $uri $uri/ /index.php; } error_page 404 /404.html; #location = /404.html { # root /usr/share/nginx/html; #} # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { #root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; #fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; fastcgi_param SCRIPT_FILENAME /var/www/live/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # Load config files from the /etc/nginx/conf.d directory include /etc/nginx/conf.d/*.conf; }

    Read the article

  • Parallel processing slower than sequential?

    - by zebediah49
    EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

    Read the article

  • Make exact mp4 (H264) format for uploading to youtube

    - by WHITECOLOR
    With ffmpeg I'm converting video from mp3 and picture to upload it to youtube. After upload, conversion fails. Reasons are unknown. I believe the problem is in format. By the way If I'm uploading file 5 minutes length, it fails if I upload 30 seconds of this file it succeeds. I have donwload mp4 file from youtube. Then I uploaded it, it is done very fast. So a nice solution would be to convert videos to the same format that is done by google. I got the following output by mpeg: ffmpeg version N-44264-g070b0e1 Copyright (c) 2000-2012 the FFmpeg developers built on Sep 7 2012 17:38:57 with gcc 4.7.1 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runt ime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass - -enable-libcelt --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-l ibfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenj peg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheo ra --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-li bvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --ena ble-zlib libavutil 51. 72.100 / 51. 72.100 libavcodec 54. 55.100 / 54. 55.100 libavformat 54. 25.105 / 54. 25.105 libavdevice 54. 2.100 / 54. 2.100 libavfilter 3. 16.100 / 3. 16.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'youtubetrack0.mp4': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2012-10-02 22:58:57 Duration: 00:06:46.66, start: 0.000000, bitrate: 176 kb/s Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yu v420p, 450x360, 78 kb/s, 6 fps, 6 tbr, 12 tbn, 12 tbc Metadata: creation_time : 1970-01-01 00:00:00 handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, s16, 95 kb/s Metadata: creation_time : 2012-10-02 22:58:57 handler_name : IsoMedia File Produced by Google, 5-11-2011 Is it possible to construct ffmpeg parameters so that that would give the same format that google internally does? Is the information above sufficient? I couldn't construct needed params. For example I don't understand how to set tbn and what 95 kb/s mean in "Stream #0:1(und): Audio:". Now I just do: ffmpeg -i videoimage.jpg -i audio.mp3 video.mp4 Info I've got: ffmpeg version N-44998-gdf82454 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 2 2012 23:03:12 with gcc 4.7.1 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libcelt --enable-libopencore-amrnb --en able-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-librtmp --enable-libschroedinger - -enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc -- enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enab le-libxavs --enable-libxvid --enable-zlib libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 63.100 / 54. 63.100 libavformat 54. 29.105 / 54. 29.105 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.102 / 3. 19.102 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 encoder : Lavf54.25.105 Duration: 00:06:46.81, start: 0.000000, bitrate: 129 kb/s Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuvj420p, 450x360, 3392 kb/s, 25 fps, 25 tbr, 25 tbn, 50 tbc Metadata: handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, s16, 127 kb/s Metadata: handler_name : SoundHandler This video fails the conversion on youtube. I also tried to use other vcode parmam and extensions of output file (mp4, wmv, avi) but failed too. Would be greatful for help.

    Read the article

  • WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

    - by Mladen Prajdic
    In previous posts I’ve shown you our SuperForm test application solution structure and how the main wxs and wxi include file look like. In this post I’ll show you how to automate inclusion of files to install into your build process. For our SuperForm application we have a single exe to install. But in the real world we have 10s or 100s of different files from dll’s to resource files like pictures. It all depends on what kind of application you’re building. Writing a directory structure for so many files by hand is out of the question. What we need is an automated way to create this structure. Enter Heat.exe. Heat is a command line utility to harvest a file, directory, Visual Studio project, IIS website or performance counters. You might ask what harvesting means? Harvesting is converting a source (file, directory, …) into a component structure saved in a WiX fragment (a wxs) file. There are 2 options you can use: Create a static wxs fragment with Heat and include it in your project. The pro of this is that you can add or remove components by hand. The con is that you have to do the pro part by hand. Automation always beats manual labor. Run heat command line utility in a pre-build event of your WiX project. I prefer this way. By always recreating the whole fragment you don’t have to worry about missing any new files you add. The con of this is that you’ll include files that you otherwise might not want to. There is no perfect solution so pick one and deal with it. I prefer using the second way. A neat way of overcoming the con of the second option is to have a post-build event on your main application project (SuperForm.MainApp in our case) to copy the files needed to be installed in a special location and have the Heat.exe read them from there. I haven’t set this up for this tutorial and I’m simply including all files from the default SuperForm.MainApp \bin directory. Remember how we created a System Environment variable called SuperFormFilesDir? This is where we’ll use it for the first time. The command line text that you have to put into the pre-build event of your WiX project looks like this: "$(WIX)bin\heat.exe" dir "$(SuperFormFilesDir)" -cg SuperFormFiles -gg -scom -sreg -sfrag -srd -dr INSTALLLOCATION -var env.SuperFormFilesDir -out "$(ProjectDir)Fragments\FilesFragment.wxs" After you install WiX you’ll get the WIX environment variable. In the pre/post-build events environment variables are referenced like this: $(WIX). By using this you don’t have to think about the installation path of the WiX. Remember: for 32 bit applications Program files folder is named differently between 32 and 64 bit systems. $(ProjectDir) is obviously the path to your project and is a Visual Studio built in variable. You can view all Heat.exe options by running it without parameters but I’ll explain some that stick out the most. dir "$(SuperFormFilesDir)": tell Heat to harvest the whole directory at the set location. That is the location we’ve set in our System Environment variable. –cg SuperFormFiles: the name of the Component group that will be created. This name is included in out Feature tag as is seen in the previous post. -dr INSTALLLOCATION: the directory reference this fragment will fall under. You can see the top level directory structure in the previous post. -var env.SuperFormFilesDir: the name of the variable that will replace the SourceDir text that would otherwise appear in the fragment file. -out "$(ProjectDir)Fragments\FilesFragment.wxs": the full path and name under which the fragment file will be saved. If you have source control you have to include the FilesFragment.wxs into your project but remove its source control binding. The auto generated FilesFragment.wxs for our test app looks like this: <?xml version="1.0" encoding="utf-8"?><Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Fragment> <ComponentGroup Id="SuperFormFiles"> <ComponentRef Id="cmp5BB40DB822CAA7C5295227894A07502E" /> <ComponentRef Id="cmpCFD331F5E0E471FC42A1334A1098E144" /> <ComponentRef Id="cmp4614DD03D8974B7C1FC39E7B82F19574" /> <ComponentRef Id="cmpDF166522884E2454382277128BD866EC" /> </ComponentGroup> </Fragment> <Fragment> <DirectoryRef Id="INSTALLLOCATION"> <Component Id="cmp5BB40DB822CAA7C5295227894A07502E" Guid="{117E3352-2F0C-4E19-AD96-03D354751B8D}"> <File Id="filDCA561ABF8964292B6BC0D0726E8EFAD" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.exe" /> </Component> <Component Id="cmpCFD331F5E0E471FC42A1334A1098E144" Guid="{369A2347-97DD-45CA-A4D1-62BB706EA329}"> <File Id="filA9BE65B2AB60F3CE41105364EDE33D27" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.pdb" /> </Component> <Component Id="cmp4614DD03D8974B7C1FC39E7B82F19574" Guid="{3443EBE2-168F-4380-BC41-26D71A0DB1C7}"> <File Id="fil5102E75B91F3DAFA6F70DA57F4C126ED" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.vshost.exe" /> </Component> <Component Id="cmpDF166522884E2454382277128BD866EC" Guid="{0C0F3D18-56EB-41FE-B0BD-FD2C131572DB}"> <File Id="filF7CA5083B4997E1DEC435554423E675C" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.vshost.exe.manifest" /> </Component> </DirectoryRef> </Fragment></Wix> The $(env.SuperFormFilesDir) will be replaced at build time with the directory where the files to be installed are located. There is nothing too complicated about this. In the end it turns out that this sort of automation is great! There are a few other ways that Heat.exe can compose the wxs file but this is the one I prefer. It just seems the clearest. Play with its options to see what can it do. It’s one awesome little tool.   WiX 3 tutorial by Mladen Prajdic navigation WiX 3 Tutorial: Solution/Project structure and Dev resources WiX 3 Tutorial: Understanding main wxs and wxi file WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

    Read the article

  • VS 2010 SP1 (Beta) and IIS Express

    - by ScottGu
    Last month we released the VS 2010 Service Pack 1 (SP1) Beta.  You can learn more about the VS 2010 SP1 Beta from Jason Zander’s two blog posts about it, and from Scott Hanselman’s blog post that covers some of the new capabilities enabled with it.  You can download and install the VS 2010 SP1 Beta here. IIS Express Earlier this summer I blogged about IIS Express.  IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios.  We think it combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into VS today with the full power of IIS.  Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk.  It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. Visual Studio 2010 SP1 adds support for IIS Express – and you can start to take advantage of this starting with last month’s VS 2010 SP1 Beta release. Downloading and Installing IIS Express IIS Express isn’t included as part of the VS 2010 SP1 Beta.  Instead it is a separate ~4MB download which you can download and install using this link (it uses WebPI to install it).  Once IIS Express is installed, VS 2010 SP1 will enable some additional IIS Express commands and dialog options that allow you to easily use it. Enabling IIS Express for Existing Projects Visual Studio today defaults to using the built-in ASP.NET Development Server (aka Cassini) when running ASP.NET Projects: Converting your existing projects to use IIS Express is really easy.  You can do this by opening up the project properties dialog of an existing project, and then by clicking the “web” tab within it and selecting the “Use IIS Express” checkbox. Or even simpler, just right-click on your existing project, and select the “Use IIS Express…” menu command: And now when you run or debug your project you’ll see that IIS Express now starts up and runs automatically as your web-server: You can optionally right-click on the IIS Express icon within your system tray to see/browse all of sites and applications running on it: Note that if you ever want to revert back to using the ASP.NET Development Server you can do this by right-clicking the project again and then select the “Use Visual Studio Development Server” option (or go into the project properties, click the web tab, and uncheck IIS Express).  This will revert back to the ASP.NET Development Server the next time you run the project. IIS Express Properties Visual Studio 2010 SP1 exposes several new IIS Express configuration options that you couldn’t previously set with the ASP.NET Development Server.  Some of these are exposed via the property grid of your project (select the project node in the solution explorer and then change them via the property window): For example, enabling something like SSL support (which is not possible with the ASP.NET Development Server) can now be done simply by changing the “SSL Enabled” property to “True”: Once this is done IIS Express will expose both an HTTP and HTTPS endpoint for the project that we can use: SSL Self Signed Certs IIS Express ships with a self-signed SSL cert that it installs as part of setup – which removes the need for you to install your own certificate to use SSL during development.  Once you change the above drop-down to enable SSL, you’ll be able to browse to your site with the appropriate https:// URL prefix and it will connect via SSL. One caveat with self-signed certificates, though, is that browsers (like IE) will go out of their way to warn you that they aren’t to be trusted: You can mark the certificate as trusted to avoid seeing dialogs like this – or just keep the certificate un-trusted and press the “continue” button when the browser warns you not to trust your local web server. Additional IIS Settings IIS Express uses its own per-user ApplicationHost.config file to configure default server behavior.  Because it is per-user, it can be configured by developers who do not have admin credentials – unlike the full IIS.  You can customize all IIS features and settings via it if you want ultimate server customization (for example: to use your own certificates for SSL instead of self-signed ones). We recommend storing all app specific settings for IIS and ASP.NET within the web.config file which is part of your project – since that makes deploying apps easier (since the settings can be copied with the application content).  IIS (since IIS 7) no longer uses the metabase, and instead uses the same web.config configuration files that ASP.NET has always supported – which makes xcopy/ftp based deployment much easier. Making IIS Express your Default Web Server Above we looked at how we can convert existing sites that use the ASP.NET Developer Web Server to instead use IIS Express.  You can configure Visual Studio to use IIS Express as the default web server for all new projects by clicking the Tools->Options menu  command and opening up the Projects and Solutions->Web Projects node with the Options dialog: Clicking the “Use IIS Express for new file-based web site and projects” checkbox will cause Visual Studio to use it for all new web site and projects. Summary We think IIS Express makes it even easier to build, run and test web applications.  It works with all versions of ASP.NET and supports all ASP.NET application types (including obviously both ASP.NET Web Forms and ASP.NET MVC applications).  Because IIS Express is based on the IIS 7.5 codebase, you have a full web-server feature-set that you can use.  This means you can build and run your applications just like they’ll work on a real production web-server.  In addition to supporting ASP.NET, IIS Express also supports Classic ASP and other file-types and extensions supported by IIS – which also makes it ideal for sites that combine a variety of different technologies. Best of all – you do not need to change any code to take advantage of it.  As you can see above, updating existing Visual Studio web projects to use it is trivial.  You can begin to take advantage of IIS Express today using the VS 2010 SP1 Beta. Hope this helps, Scott

    Read the article

  • Stream Music and Video Over the Internet with Windows Media Player 12

    - by DigitalGeekery
    A new feature in Windows Media Player 12, which is included with Windows 7, is being able to stream media over the web to other Windows 7 computers.  Today we will take a look at how to set it up and what you need to begin. Note: You will need to perform this process on each computer that you want to use. What You’ll Need Two computers running Windows 7 Home Premium, Professional, or Ultimate. The host, or home computer that you will be streaming the media from, cannot be on a public network or part of domain. Windows Live ID UPnP or Port Forwarding enabled on your home router Media files added to your Windows Media Player library Windows Live ID Sign up online for a Windows Live ID if you do not already have one. See the link below for a link to Windows Live.   Configuring the Windows 7 Computers Open Windows Media Player and go to the library section. Click on Stream and then “Allow Internet access to home media.”   The Internet Home Media Access pop up window will prompt you to link your Windows Live ID to a user account. Click “Link an online ID.” If you haven’t already installed the Windows Live ID Sign-In Assistant, you will be taken to Microsoft’s website and prompted to download it. Once you have completed the Windows Live download assistant install, you will see Windows Live ID online provider appear in the “Link Online IDs” window. Click on “Link Online ID.” Next, you’ll be prompted for a Windows Live ID and password. Enter your Windows Live ID and password and click “Sign In.” A pop up window will notify you that you have successfully allowed Internet access to home media. Now, you will have to repeat the exact same configuration on the 2nd Windows 7 computer. Once you have completed the same configuration on your 2nd computer, you might also need to configure your home router for port forwarding. If your router supports UPnP, you may not need to manually forward any ports on your router. So, this would be a good time to test your connection. Go to a nearby hotspot, or perhaps a neighbor’s house, and test to see if you can stream your media. If not, you’ll need to manually forward the ports. You can always choose to forward the ports anyway, just in case. Note: We tested on a Linksys WRT54GL router, which supports UPnP, and found we still needed to manually forward the ports. Finding the ports to forward on the router Open Windows Media Player and make sure you are in Library view. Click on “Stream” on the top menu, and select “Allow Internet access to home media.”   On the “Internet Home Media Access” window, click on “Diagnose connections.” The “Internet Streaming Diagnostic Tool” will pop up. Click on “Port forwarding information” near the bottom.   On the “Port Forwarding Information” window you will find both the Internal and External Port numbers you will need to forward on your router. The Internal port number should always be 10245. The external number will be different depending on your computer. Microsoft also recommends forwarding port 443. Configuring the Router Next, you’ll need to configure Port Forwarding on your home router. We will show you the steps for a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Administration Tab along the top, click the “Applications & Gaming Tab, and then the “Port Range Forward” tab below it. Under “Application,” type in a name. It can be any name you choose. In both the “Start” and “End” boxes, type the port number. Enter the IP address of your home computer in the IP address column. Click the check box under “Enable.” Do this for both the internal and external port numbers and port 443. When finished, click the “Save Settings” button. Note: It’s highly recommended that you configure your home computer with a static IP address When you’re ready to play your media over the Internet, open up Windows Media Player and look for your host computer and username listed under “Other Libraries.” Click on it expand the list to see your media libraries. Choose a library and a file to play. Now you can enjoy your streaming media over the Internet. Conclusion We found media streaming over the Internet to work fairly well. However, we did see a loss of quality with streaming video. Also, Recorded TV .wtv and dvr-ms files did not play at all. Check out our previous article to see how to stream media share and stream media between Windows 7 computers on your home network. Similar Articles Productive Geek Tips Enable Media Streaming in Windows Home Server to Windows Media PlayerFixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Share and Stream Digital Media Between Windows 7 Machines On Your Home NetworkLearning Windows 7: Manage Your Music with Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox)

    Read the article

  • Customize your icons in Windows 7 and Vista

    - by Matthew Guay
    Want to change out the icons on your desktop and more?  Personalizing your icons is a great way to make your PC uniquely yours,, and today we show you how to grab unique icons, and default Winnows. to be your own. Change the icon for Computer, Recycle Bin, Network, and your User folder Right-click on the desktop, and select Personalize. Now, click the “Change desktop icons” link on the left sidebar in the Personalization window. The window looks slightly different in Windows Vista, but the link is the same. Select the icon you wish to change, and click the Change Icon button.  In Windows 7, you will also notice a box to choose whether or not to allow themes to change icons, and you can uncheck it if you don’t want themes to change your icon settings. You can select one of the other included icons, or click browse to find the icon you want.  Click Ok when you are finished. Change Folder icons You can easily change the icon on most folders in Windows Vista and 7.  Simply right-click on the folder and select properties. Click the Customize tab, and then click the Change Icon button.  This will open the standard dialog to change your icon, so proceed as normal. This basically just creates a hidden desktop.ini file in the folder containing the following or similar data: [.ShellClassInfo]IconFile=%SystemRoot%\system32\SHELL32.dllIconIndex=20 You could manually create or edit the file if you choose, instead of using the dialogs. Simply create a new text file named desktop.ini with this same information, or edit the existing one.  Change the IconFile line to the location of your icon. If you are pointing to a .ico file you should change the IconIndex line to 0 instead. Note that this isn’t available for all folders, for instance you can’t use this to change the icon for the Windows folder.   In Windows 7, please note that you cannot change the icon of folder inside a library.  So if you are browsing your Documents library and would like to change an icon in that folder, right-click on it and select Open folder location.  Now you can change the icon as above. And if you would like to change a Library’s icon itself, then check out this tutorial: Change Your Windows 7 Library Icons the Easy Way Change the icon of any file type Want to make you files easier to tell apart?  Check out our tutorial on how to simply do this: Change a File Type’s Icon in Windows 7 Change the icon of any Application Shortcut To change the icon of a shortcut on your desktop, start menu, or in Explorer, simply right-click on the icon and select Properties. In the Shortcut tab, click the Change Icon button. Now choose one of the other available icons or click browse to find the icon you want. Change Icons of Running Programs in the Windows 7 taskbar If your computer is running Windows 7, you can customize the icon of any program running in the taskbar!  This only works on applications that are running but not pinned to the taskbar, so if you want to customize a pinned icon you may want to unpin it before customizing it.  But the interesting thing about this trick is that it can customize any icon anything running in the taskbar, including things like Control Panel! Right-click or click and push up to open the jumplist on the icon, and then right-click on the program’s name and select Properties.  Here we are customizing Control Panel, but you can do this on any application icon. Now, click Change Icon as usual. Select an icon you want (We switched the Control Panel icon to the Security Shield), or click Browse to find another icon.  Click Ok when finished, and then close the application window. The next time you open the program (or Control Panel in our example), you will notice your new icon on its taskbar icon. Please note that this only works on applications that are currently running and are not pinned to the taskbar.  Strangely, if the application is pinned to the taskbar, you can still click Properties and change the icon, but the change will not show up. Change the icon on any Drive on your Computer You can easily change the icon on your internal hard drives and portable drives with the free Drive Icon Changer application.  Simply download and unzip the file (link below), and then run the application as administrator by right-clicking on the icon and selecting “Run as administrator”. Now, select the drive that you want to change the icon of, and select your desired icon file. Click Save, and Drive Icon Changer will let you know that the icon has been changed successfully. You will then need to reboot your computer to complete the changes.  Simply click Yes to reboot. Now, our Drive icon is changed from this default image: to a Laptop icon we chose! You can do this to any drive in your computer, or to removable drives such as USB flash drives.  When you change these drives icons, the new icon will appear on any computer you insert the drive into.  Also, if you wish to remove the icon change, simply run the Drive Icon Changer again and remove the icon path. Download Drive Icon Changer This application actually simply creates or edits a hidden Autorun.inf file on the top of your drive.  You can edit or create the file yourself by hand if you’d like; simply include the following information in the file, and save it in the top directory of your drive: [autorun]ICON=[path of your icon] Remove Arrow from shortcut icons Many people don’t like the arrow on the shortcut icon, and there are two easy ways to do this. If you’re running the 32 bit version of Windows Vista or 7, simply use the Vista Shortcut Overlay Remover. If your computer is running the 64 bit version of Windows Vista or 7, use the Ultimate Windows Tweaker instead.  Simply select the Additional Tweaks section, and check the “Remove arrows from Shortcut Icons.” For more info and download links check out this article: Disable Shortcut Icon Arrow Overlay in Windows 7 or Vista Closing: This gives you a lot of ways to customize almost any icon on your computer, so you can make it look just like you want it to.  Stay tuned for more great desktop customization articles from How-to Geek! Similar Articles Productive Geek Tips Change Start Menu to Use Small Icons in Windows 7 or VistaResize Icons Quickly in Windows 7 or Vista ExplorerRoundup: 16 Tweaks to Windows Vista Look & FeelRestore Missing Desktop Icons in Windows 7 or VistaClean Up Past Notification Icons in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

    Read the article

  • How To Skip Commercials in Windows 7 Media Center

    - by DigitalGeekery
    If you use Windows 7 Media Center to record live TV, you’re probably interested in skipping through commercials. After all, a big reason to record programs is to avoid commercials, right? Today we focus on a fairly simple and free way to get you skipping commercials in no time. In Windows 7, the .wtv file format has replaced the dvr-ms file format used in previous versions of Media Center for Recorded TV. The .wtv file format, however, does not work very well with commercial skipping applications.  The Process Our first step will be to convert the recorded .wtv files to the previously used dvr-ms file format. This conversion will be done automatically by WtvWatcher. It’s important to note that this process deletes the original .wtv file after successfully converting to .dvr-ms. Next, we will use DVRMSToolBox with the DTB Addin to handle commercials skipping. This process does not “cut” or remove the commercials from the file. It merely skips the commercials during playback. WtvWatcher Download and install the WTVWatcher (link below). To install WtvWatcher, you’ll need to have Windows Installer 3.1 and .NET Framework 3.5 SP1. If you get the Publisher cannot be verified warning you can go ahead and click Install. We’ve completely tested this app and it contains no malware and runs successfully.   After installing, the WtvWatcher will pop up in the lower right corner of your screen. You will need to set the path to your Recorded TV directory. Click on the button for “Click here to set your recorded TV path…”   The WtvWatcher Preferences window will open…   …and you’ll be prompted to browse for your Recorded TV folder. If you did not change the default location at setup, it will be found at C:\Users\Public\Recorded TV. Click “OK” when finished. Click the “X” to close the Preferences screen. You should now see WtvWatcher begin to convert any existing WTV files.   The process should only take a few minutes per file. Note: If WtvWatcher detects an error during the conversion process, it will not delete the original WTV file.    You will probably want to run WtvWatcher on startup. This will allow WtvWatcher too constantly scan for new .wtv files to convert. There is no setting in the application to run on startup, so you’ll need to copy the WTV icon from your desktop into your Windows start menu “Startup” directory. To do so, click on Start > All Programs, right-click on Startup and click on Open all users. Drag and drop, or cut and paste, the WtvWatcher desktop shortcut into the Startup folder. DVRMSToolBox and DTBAddIn Next, we need to download and install the DVRMSToolBox and the DTBAddIn. These two pieces of software will do the actual commercial skipping. After downloading the DVRMSToolBox zip file, extract it and double-click the setup.exe file.  Click “Next” to begin the installation.   Unless DVRMSToolBox will only be used by Administrator accounts, check the “Modify File Permissions” box. Click “Next.” When you get to the Optional Components window, uncheck Download/Install ShowAnalyzer. We will not be using that application. When the installation is complete, click “Close.”    Next we need to install the DTBAddin. Unzip the download folder and run the appropriate .msi file for your system. It is available in 32 & 64 bit versions. Just double click on the file and take the default options. Click “Finish” when the install is completed. You will then be prompted to restart your computer. After your computer has restarted, open DVRMSToolBox settings by going to Start > All Programs, DVRMSToolBox, and click on DVRMStoMPEGSettings. On the MC Addin tab, make sure that Skip Commercials is checked. It should be by default.   On the Commercial Skip tab, make sure the Auto Skip option is selected. Click “Save.”   If you try to watch recorded TV before the file conversion and commercial indexing process is complete you’ll get the following message pop up in Media Center. If you click Yes, it will start indexing the commercials if WtvWatcher has already converted it to dvr-ms. Now you’re ready to kick back and watch your recorded tv without having to wait through those long commercial breaks. Conclusion The DVRMSToolBox is a powerful and complex application with a multitude of features and utilities. We’ve showed you a quick and easy way to get your Windows Media Center setup to skip commercials. This setup, like virtually all commercial skipping setups, is not perfect. You will occasionally find a commercial that doesn’t get skipped. Need help getting your Windows 7 PC configured for TV? Check out our previous tutorial on setting up live TV in Windows Media Center. Links Download WTV Watcher Download DVRMSToolBox Download DTBAddin Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Increase Skip and Replay Intervals in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

    - by DigitalGeekery
    Are you looking for a way to backup your DVD movie collection to AVI?  Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs >  FairUse Wizard 2 >  FairUse Wizard 2.   FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name.  Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi.   Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process.   Click on the Options button at the bottom.   Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process.   Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.”   FairUse Wizard will parse the IFO files and display all video chains longer than 60  seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.”   Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.”   Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready.   Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • T4 Template error - Assembly Directive cannot locate referenced assembly in Visual Studio 2010 proje

    - by CodeSniper
    I ran into the following error recently in Visual Studio 2010 while trying to port Phil Haack’s excellent T4CSS template which was originally built for Visual Studio 2008.   The Problem Error Compiling transformation: Metadata file 'dotless.Core' could not be found In “T4 speak”, this simply means that you have an Assembly directive in your T4 template but the T4 engine was not able to locate or load the referenced assembly. In the case of the T4CSS Template, this was a showstopper for making it work in Visual Studio 2010. On a side note: The T4CSS template is a sweet little wrapper to allow you to use DotLessCss to generate static .css files from .less files rather than using their default HttpHandler or command-line tool.    If you haven't tried DotLessCSS yet, go check it out now!  In short, it is a tool that allows you to templatize and program your CSS files so that you can use variables, expressions, and mixins within your CSS which enables rapid changes and a lot of developer-flexibility as you evolve your CSS and UI. Back to our regularly scheduled program… Anyhow, this post isn't about DotLessCss, its about the T4 Templates and the errors I ran into when converting them from Visual Studio 2008 to Visual Studio 2010. In VS2010, there were quite a few changes to the T4 Template Engine; most were excellent changes, but this one bit me with T4CSS: “Project assemblies are no longer used to resolve template assembly directives.” In VS2008, if you wanted to reference a custom assembly in your T4 Template (.tt file) you would simply right click on your project, choose Add Reference and select that assembly.  Afterwards you were allowed to use the following syntax in your T4 template to tell it to look at the local references: <#@ assembly name="dotless.Core.dll" #> This told the engine to look in the “usual place” for the assembly, which is your project references. However, this is exactly what they changed in VS2010.  They now basically sandbox the T4 Engine to keep your T4 assemblies separate from your project assemblies.  This can come in handy if you want to support different versions of an assembly referenced both by your T4 templates and your project. Who broke the build?  Oh, Microsoft Did! In our case, this change causes a problem since the templates are no longer compatible when upgrading to VS 2010 – thus its a breaking change.  So, how do we make this work in VS 2010? Luckily, Microsoft now offers several options for referencing assemblies from T4 Templates: GAC your assemblies and use Namespace Reference or Fully Qualified Type Name Use a hard-coded Fully Qualified UNC path Copy assembly to Visual Studio "Public Assemblies Folder" and use Namespace Reference or Fully Qualified Type Name.  Use or Define a Windows Environment Variable to build a Fully Qualified UNC path. Use a Visual Studio Macro to build a Fully Qualified UNC path. Option #1 & 2 were already supported in Visual Studio 2008, so if you want to keep your templates compatible with both Visual Studio versions, then you would have to adopt one of these approaches. Yakkety Yak, use the GAC! Option #1 requires an additional pre-build step to GAC the referenced assembly, which could be a pain.  But, if you go that route, then after you GAC, all you need is a simple type name or namespace reference such as: <#@ assembly name="dotless.Core" #> Hard Coding aint that hard! The other option of using hard-coded paths in Option #2 is pretty impractical in most situations since each developer would have to use the same local project folder paths, or modify this setting each time for their local machines as well as for production deployment.  However, if you want to go that route, simply use the following assembly directive style: <#@ assembly name="C:\Code\Lib\dotless.Core.dll" #> Lets go Public! Option #3, the Visual Studio Public Assemblies Folder, is the recommended place to put commonly used tools and libraries that are only needed for Visual Studio.  Think of it like a VS-only GAC.  This is likely the best place for something like dotLessCSS and is my preferred solution.  However, you will need to either use an installer or a pre-build action to copy the assembly to the right folder location.   Normally this is located at:  C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PublicAssemblies Once you have copied your assembly there, you use the type name or namespace syntax again: <#@ assembly name="dotless.Core" #> Save the Environment! Option #4, using a Windows Environment Variable, is interesting for enterprise use where you may have standard locations for files, but less useful for demo-code, frameworks, and products where you don't have control over the local system.  The syntax for including a environment variable in your assembly directive looks like the following, just as you would expect: <#@ assembly name="%mypath%\dotless.Core.dll" #> “mypath” is a Windows environment variable you setup that points to some fully qualified UNC path on your system.  In the right situation this can be a great solution such as one where you use a msi installer for deployment, or where you have a pre-existing environment variable you can re-use. OMG Macros! Finally, Option #5 is a very nice option if you want to keep your T4 template’s assembly reference local and relative to the project or solution without muddying-up your dev environment or GAC with extra deployments.  An example looks like this: <#@ assembly name="$(SolutionDir)lib\dotless.Core.dll" #> In this example, I’m using the “SolutionDir” VS macro so I can reference an assembly in a “/lib” folder at the root of the solution.   This is just one of the many macros you can use.  If you are familiar with creating Pre/Post-build Event scripts, you can use its dialog to look at all of the different VS macros available. This option gives the best solution for local assemblies without the hassle of extra installers or other setup before the build.   However, its still not compatible with Visual Studio 2008, so if you have a T4 Template you want to use with both, then you may have to create multiple .tt files, one for each IDE version, or require the developer to set a value in the .tt file manually.   I’m not sure if T4 Templates support any form of compiler switches like “#if (VS2010)”  statements, but it would definitely be nice in this case to switch between this option and one of the ones more compatible with VS 2008. Conclusion As you can see, we went from 3 options with Visual Studio 2008, to 5 options (plus one problem) with Visual Studio 2010.  As a whole, I think the changes are great, but the short-term growing pains during the migration may be annoying until we get used to our new found power. Hopefully this all made sense and was helpful to you.  If nothing else, I’ll just use it as a reference the next time I need to port a T4 template to Visual Studio 2010.  Happy T4 templating, and “May the fourth be with you!”

    Read the article

  • Who IS Brian Solis?

    - by Michael Snow
    Q: Brian, Welcome to the WebCenter Blog. Can you tell our readers your current role and what career path brought you here? A: I’m proudly serving as a principal analyst at Altimeter Group, a research based advisory firm in Silicon Valley. My career path, well, let’s just say it’s a long and winding road. As a kid, I was fascinated with technology. I learned programming at an early age and found myself naturally drawn to all things tech. I started my career as a database programmer at a technology marketing agency in Southern California. When I saw the chance to work with tech companies and help them better market their capabilities to businesses and consumers, I switched focus from programming to marketing and advertising. As technologist, my approach to marketing was different. I didn’t believe in hype, fluff or buzz words. I believed in translating features into benefits and specifications and capabilities into solutions for real world problems and opportunities. In the mid 90’s I experimented with direct to consumer/customer engagement in dedicated technology forums and boards. I quickly realized that the entire approach to do so would need to change. Therefore, I learned and developed new methods for a more social and informed way of engaging people in ways that helped them, marketed the company, and also tied to tangible benefits for the company. This work would lead me to start an agency in 1999 dedicated to interactive marketing. As I continued to experiment with interactive platforms, I developed interesting methods for converting one-to-many forms of media into one-to-one-to-many programs. I ran that company until joining Altimeter Group. Along the way, in the early 2000s, I realized that everything was changing and that there were others like me finding success in what would become a more social form of media. I dedicated a significant amount of my time to sharing everything that I learned in the form of articles, blogs, and eventually books. My mission became to share my experience with anyone who’d listen. It would later become much bigger than marketing, this would lead to a decade of work, that still continues, in business transformation. Then and now, I find myself always assuming the role of a student. Q: As an industry analyst & technology change evangelist, what are you primarily focused on these days? A: As a digital analyst, I study how disruptive technology impacts business. As an aspiring social scientist, I study how technology affects human behavior. I explore both horizons professionally and personally to better understand the future of popular culture and also the opportunities that exist for organizations to improve relationships and experiences with customers and the people that are important to them. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? A: The line between work and life isn’t blurred it’s been overtly crossed and erased. We live in an always on society. The digital lifestyle keeps us connected to one another it keeps us connected all the time. Whether your sending or checking email, trying to catch up, or simply trying to get ahead, people are spending the equivalent of an extra day at work in the time they spend out of work…working. That’s absurd. It’s a matter of survival. It’s also a matter of unintended, subconscious self-causation. We brought this on ourselves and continue to do so. Think about your day. You’re in meetings for the better part of each day. You probably spend evenings and weekends catching up on email and actually doing the work you couldn’t get to during the day. And, your co-workers and executives are doing the same thing. So if you try to slow down, you find yourself at a disadvantage as you’re willfully pulling yourself out of an unfortunate culture of whenever wherever business dynamics. If you’re unresponsive or unreachable, someone within your organization or on your team is accessible. Over time, this could contribute to unfavorable impressions. I choose to steer my life balance in ways that complement one another. But, I don’t pretend to have this figured out by any means. In fact, I find myself swimming upstream like those around me. It’s essentially a competition for relevance and at some point I’ll learn how to earn attention and relevance while redrawing the line between work and life. Q: How can people keep up with what you’re working on? A: The easy answer is that people can keep up with me at briansolis.com. But, I also try to reach people where their attention is focused. Whether it’s Facebook (facebook.com/briansolis), Twitter (@briansolis), Google+ (+briansolis), Youtube (briansolis.tv) or through books and conferences, people can usually find me in a place of their choosing. Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon? A: I spent some time with the Oracle team reviewing the idea of Digital Darwinism and how technology and society are evolving faster than many organizations can adapt. Digital Darwinism: How Brands Can Survive the Rapid Evolution of Society and Technology Thursday, December 13, 2012, 10 a.m. PT / 1 p.m. ET Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast? A: We’re inviting guests to join us online as we dive into the future of business and how the convergence of technology and connected consumerism would ultimately impact how business is done. It’ll be an exciting and revealing conversation that explores just how much everything is changing. We’ll also review the importance of adapting to emergent trends and how to compete for the future. It’s important to recognize that change is not happening to us, it’s happening because of us. We are part of the revolution and therefore we need to help organizations adapt from the inside out. Watch the Entire Oracle Social Business Thought Leaders Webcast Series On-Demand and Stay Tuned for More to Come in 2013!

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >