Search Results

Search found 3461 results on 139 pages for 'drives'.

Page 94/139 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Kickstart Partitioning Configuration

  - by Flo

  I'be been trying to run a kickstart script with the following partition configuration: #Clear the masterboot record zerombr bootloader --location=mbr --driveorder=sda --append=" rhgb crashkernel=auto quiet" # Set up the partitions/logical volumes/logical groups clearpart --all part /boot --fstype=ext4 --asprimary --size=512 --ondisk=sda part swap --size=2048 --fstype=swap --ondisk=sda part pv.01 --fstype=ext4 --grow --size=200 --ondisk=sda part pv.02 --fstype=ext4 --grow --size=200 --ondisk=sdb volgroup VolGroup pv.01 pv.02 --pesize=32768 logvol /opt --fstype=ext4 --name=opt.fs --vgname=VolGroup --size=40000 logvol / --fstype=ext4 --name=root.fs --vgname=VolGroup --size=78000 I have two hard drives and it looks to me like its a really simple configuration. When I run the kickstart I keep getting all these errors that have to do with python files for configuring partitions. The only actual maybe useful piece of information is KeyError /dev/sda/ I tried a number of alterations of this configuration but nothing really worked. Any ideas?

  Read the article

• Python/Lesta.A worm

  - by Hanks

  My Nod32 have been catching something that is apparently identified as Python/Lesta.A worm. No matter how many times I tell Nod32 to delete and quarantine the file, it always re-appear, the situation will repeat about 3-4 times a day. This thing has been creating a folder called "pamela" in one of my drives, it sometimes also creates a "xxx.folder" file, which Nod32 identifies as "Exploit/CodeBase virus". I have Googled, and done pretty much everything related to this: a full scan in safe mode with no networking turned on, and also ran Ad-Aware, SpyBot, SpyHunter, ComboFix and cleaned the registry. Any idea how I can completely get rid of this annoying virus/worm?

  Read the article

• Manual TRIM Windows 7 on OCZ VERTEX 2 SATA II 2.5" SSD

  - by INTPnerd

  I have an OCZ VERTEX 2 SATA II 2.5" SSD with Windows 7 Professional installed on it. I am pretty sure TRIM is not working because my motherboard is the Asus M2N-SLI (not the Deluxe model) which does not support AHCI mode for the drive. Is there a utility that is compatible with this drive that I could possibly run once a day that would do something similar to a manual TRIM in order to keep the drive performance up? I could not find one specifically for this drive on the OCZ website. I did find a User-Initiated Garbage Collection wiper tool, but it is for a Vertex drive not Vertex 2. I tried to run it, but it said that wiper could not be run for all the drives on this system.

  Read the article

• I get a consistency y error when I use my second hard drive

  - by Stavros

  I have two hard drives with win8 installed to both of them. Sometimes, when I boot from the second one (with F12 boot-menu and the second drive selection) and later reboot and start my PC from the first one, I get a disk error for a consistency problem. Windows ask for a disk check and after that, I can't anymore boot from the second drive or have access to it. Why this happens and how can I prevent it? What options do I have except from reinstalling windows? Thanks Stavros

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• How do I connect to my home's primary wired network through an extra (wireless) router?

  - by Matthew Patrick Cashatt

  Thanks for looking! I have set up a desktop PC in my workshop. The Cat 5 cable connects from this PC to a wireless router which is connected to my home network. The Internet connection is working just fine. However, the "wired" network this is on shows up as a different wired network than the one that the PCs inside my house are connected to. This is a problem because I would like to connect this workshop PC to various shared resources like printers, HD Homerun (cable tv card), shared drives, etc. When I go to "Network and Sharing" and attempt to find the network that the PCs inside my home are connected to, I don't see it. Any help is appreciated. Thanks!

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• Home Server Restore

  - by Bryan Avery

  I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

  Read the article

• Create intentional border with xrandr

  - by benizi

  Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

  Read the article

• Network Block Device (NBD) clients for Windows or similar solutions

  - by przemoc

  Are there any NBD clients for Windows? Strangely, I cannot find any, or I am searching for them in a wrong way. Such client should be possibly a driver with front-end tool (may be a command-line one) allowing to create virtual drives and associate them with given hosts (or simply localhost) and ports where NBD servers are listening. From user perspective virtual drive should be close to what physical drive is, so it should be accessible as something like \\.\PhysicalDriveX (maybe \\.\VirtualDriveX?), be visible in Disk Management (diskmgmt.msc) and mountvol tools at least. (The only thing I found remotely close to NBD on Windows is ImDisk's proxy mode and companion tool devio, but AFAIK ImDisk only works at partition level (so no virtual drive) and devio uses different protocol.) Secondary question is: Are there any (preferably simple) Windows-specific solutions allowing creation of virtual drive delegating read/write request to user-space via some explicit way (like via TCP, IPC, DLL implementing given API, etc.)?

  Read the article

• Why does my USB stick not show up in Windows Vista?

  - by Kjensen

  Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

  Read the article

• Non-ECC memory with ZFS: a stupid idea?

  - by iconoclast

  I'm the proud new owner of an HP Proliant Microserver N40L, and planning to upgrade the (obviously paltry 2 GB of) memory to the maximum of 16 GB. (Theoretically 8 GB is the limit, but empirically 16 GB has been shown to work.) Some guides advise that ECC memory is not that important, but I'm not so sure I believe this. I've installed FreeNAS and am planning to add ZFS volumes as soon as my new hard drives arrive. Would it be stupid to skimp and get non-ECC memory for a ZFS-based NAS? If it's necessary, then I'll bite the bullet, but if it's just paranoia, then I'll probably skip it.

  Read the article

• Does a successful exit of rsync -acvvv s d guarantee identical directory trees?

  - by user259774

  I have two volumes, one xfs, and another ntfs - ntfs was empty, and xfs had 10 subitems. I needed to sync them. I initially copied a few of the subitems by dragging them over in a gui fm. Several of the direct descendants which i had dragged finished, apparently. One I stopped before it was done, and the rest I cancelled while it still appeared to be gathering information about the files. Then I ran rsync -acvvv xmp/ nmp/, where xmp and nmp are the volumes' respective mountpoints, which exited with a 0 status. find xmp -printf x | wc -c and find nmp -printf x | wc -c both return 372926. My question is: Am I guaranteed that the two drives' contents are identical?

  Read the article

• Boot from Second SATA Drive

  - by Chris

  I have a Dell Precision 490 Workstation, and I just had my other question answered, Install Ubuntu to drive B without impacting drive A, and now I'm having a boot sequence issue. The external drive is great, boots up fine on my laptop, but how do I tell my desktop to boot from my second SATA drive and not the first SATAdrive. My drive configuration as follows SATA-0: Windows SATA-1: DVDR SATA-2: Ubuntu When I choose the boot menu, the option I have is "Internal Hard Drive". I assume it searches all drives, and loads the first bootable one it finds (which happens to be Windows), but I'd like to be able to select the drive from a list. Has anyone experienced this? Is possible without disabling the first hard drive in the BIOS?

  Read the article

• Phantom Local Disks appearing in my drive list

  - by Paul

  I seem to have several phantom Local Disks mapped to different letters that are of 0 bytes in size. Strangely, they do not show up when I view my drives through Windows Explorer. But if I open an application such as ACDSee Pro or MS Word and then go to open a file I can see all these Local Disks mapped to different letters. This means when I plug in my external hard disk it ends up mapped to letter R instead of its usual G which messes up any programs I have pointing to it by default. How did they get there and more importantly, how do I get rid of them? I'm on a Window 7 Home Premium 32 bit machine.

  Read the article

• Has anyone figured out how to use same username with different passwords (Windows)

  - by Coder

  Tried Googling, tried net use, and anything I could, with no results. I have a PC with users, and I have a network server with shared folders. For some users the usernames of the share and local account match, but the passwords are different (a good security practice). Unfortunately, Windows doesn't want to remap the drives on login, and asks for credentials when I try to connect. If I enter the password, the connection succeeds, but it still fails on next login, even if I have checked the "remember" checkbox. On PC: usera@machinea pass1 On NAS: usera@nas pass2 net use z: \\nasip\usera /user:nasip\usera pass2 /persistent:yes Credential store seems to have the user credentials stored... But the mapping fails all the time.

  Read the article

• Proper way to partition filesystem with Xen

  - by luckytaxi

  I'm coming from a vmware environment, wanting to play with Xen. I have a server with 2 x 500G SATA drives (no hardware RAID available, have to use software-based RAID1). My partitions are all RAID1 except for swap. I left a little over 400G for my VMs and I would like to use LVM for the disk images. For domU's swap, should I allocate that from the 400G or should that be coming from dom0's partition? I asked because I've seen numerous config options that shows either or.

  Read the article

• Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

  - by Nate

  I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

  Read the article

• Simple Ubuntu Server - Expanding disk space - adding a new drive LVM, RAID0 existing setup - how?

  - by NightWolf

  I have a 1TB ext4 partition mounted at / with all my data and Ubuntu 11.04 (natty) installed. Now this drive is almost full (I used it as a database server for some processing). RAID0 is ok, I can take a failure (touch wood). But I need a way to grow this partition. I have a new 1TB drive I want to add, however as my Ubuntu boot and all data is on the one partition I'm not sure how I can go about setting up a RAID0 or LVM array without loosing all my data. So the question is how can I extend my existing ext4 partition over two physical drives without losing data? Thanks!

  Read the article

• How to resize a ubuntu partition to make more room for windows

  - by Jeremy

  My laptop has Windows 7 and Ubuntu 13.10 installed alongside each other. My laptop has two 225GB hard drives. I give Ubuntu 133.65GB and I give Windows 87.76GB on the same hard drive (C). My problem now is that Windows is almost out of space but Ubuntu is only using a few GB of the 133.65GB that I gave it. I want to reduce Ubuntu's partition size and give that space to increase Windows partition size. Is that any program that can to do this?

  Read the article

• MS Windows issue - "Filename or extension is too long"

  - by Daniel

  I run Microsoft windows on a few of my machines. I don't know if many people know about this issue in the OS but you can't have very long filenames, from what I know Linux can have longer names, I have never run into this issue on my Linux machines. Anyway I run into issues whenever copying folders & files to backup drives. I manually backup of my data, finding and changing names of files, this is very very tedious. Is there a software tool to shorten folders or filenames that are found to be to long on Windows? I have drive image duplication software which does the job but in a way that I don't like, plus moving files can become a hassle at times if the names are too long to copy.

  Read the article

• DVD stops working in windows 7 64 bit

  - by Skadlig

  I have the same problem as described in this question: http://superuser.com/questions/105928/dvd-cd-rom-drives-stop-working-in-windows-7 I know I have got some games that are using starforce and/or securerom. What I don't have is the upper and lower filter in my registry tag. Oh and a reboot temporarily fixes my problem. After a random time though it goes missing again. I found a Microsoft knowledge base article regarding this but since I didn't have the filter tags they couldn't help me. Does anyone have any other tips bar removing the despicable drm:s? I would like to go on playing my games so that is not really an option for me.

  Read the article

• Material to use for computer system cover against UV and salty air?

  - by hippietrail

  I live right next to the sea and have a large window quite close to my computer setup which allows a lot of indirect sunlight to enter. I'd like to buy or make a cover for my computer system. From visiting my usual mom & pop computer shop yesterday I got the impression these might not really exist any more. If I make my own I need a material with these qualities: Block or reduce ultraviolet light which can depolymerize plastics (the sun here in Australia is much stronger than in the northern hemisphere). Block salt-laden sea air which can oxidize USB and other connectors. Not cause static electricity when covering or uncovering. Keep dust off of course (-: My setup is a laptop plugged into a wide-screen LCD with a few external drives. So I think I'd want a largish sheet to flop over the whole desk. Are such covers commonly sold these days? What material(s) should I look for which provides the listed attributes?

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >