paula ditallo 2007 2009 all rights reserved - Page 94

Active Directory management with low user rights

- by DemonWareXT

Our problem: The client, a normal user, has to be able to reset multiple passwords at once. Around 30 in one go. This would call for powershell or something along these lines, but for AD and Powershell one needs to be domain administrator. My solution would be to make a service that runs on the AD server and take connections from a program. The service would then do the AD changes. So far so good, I would just like to hear some other thoughts on this problem. Because I sure can't be the only one with it

Read the article

Using sudo /etc/init.d/httpd start complains for log file rights

- by SCO

I created a custom log directory with the root account, and chmoded it to 777 teporarily. ls -la /var/mylogs/log/ total 16 drwxrwxrwx 2 root root 4096 Jun 24 06:27 . drwxr-xr-x 5 root root 4096 Jun 24 06:25 .. When I try to start the service from a user (lets say "myuser", which is in the sudoers files as myuser ALL=(ALL) ALL), it fails because of the permissions : sudo /etc/init.d/httpd start Starting httpd: (13)Permission denied: httpd: could not open error log file /var/mylogs/log/httpd_error.log. Unable to open logs However, the following is successfull : sudo bash /etc/init.d/http start So I guess these two methods are not equivalent, although to me doing sudo was the same than logging into the root account and issuing the commands. Any clue ? Thank you !

Read the article

User receives group membership error to terminal server even though has rights

- by BlueToast

http://www.hlrse.net/Qwerty/TSLoginMembership.png To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right, you must be granted this right manually. Only as of today a particular user began receiving this message for a second terminal server they use; otherwise, they have never had any problems authenticating into this server. We have no restrictions on simultaneous and multiple logins. On each terminal server, we have a group and security group like "_Users" locally in the Builtin\Remote Desktop Users group. For this particular user, on this particular terminal server we have locally given him Administrator, Remote Desktop Users, and Users membership; in AD we have given him DOMAIN\Administrator, Builtin\Remote Desktop Users, DOMAIN\_Users. It still gives us that error message. We gave him membership to another terminal server (random) by simply making him member of another DOMAIN\_Users group -- successfully able to login to that random terminal server. So, from scratch we created an AD account 'dummy' (username) with only Domain Users membership. Tried to login to this particular server, no success. So I added 'dummy' to DOMAIN\_Users group, and then was successfully able to login. Other users from this user's department are able to login to this particular server just fine as well. We checked the Security logs on this particular server, and while it is logging everything, the only thing it appears to not log are these failed login attempts from this particular user who receives this error message. We have tried rebooting the server, and the user is still receiving that error message.

Read the article

Apache has no rights to unzip file uploaded by DirectAdmin created FTP user

- by FlyOn

I know similar things have been asked a thousandfold, but I can't seem to figure it out.. I have recently started renting a VPS. It runs DirectAdmin. I created a reseller account in the admin account, and created a new user (with FTP account) with the reseller account. I logged in with FTP as the created user and uploaded a zip file and a php file which will extract the zip. But when running the script in the browser I get "Permission denied" errors however. Probably because Apache is not in the same group as the users FTP account. Now my question is: How can I solve this once and for all, so that I don't have to do it again for every new user account I create through DirectAdmin?

Read the article

How does Amazon ec2-user get its sudo rights

- by Johan

I am looking for where the default Amazon AMI linux image sets up the privileges for the default ec2-user account. After logging in with this account I can use sudo successfully. Checking via the sudoers file, which I open by running visudo (with no other options) I see a few default settings and permissions for root ALL ALL So ... Where is the permissions for ec2-user assigned? I have not yet tried to add a new permission but ultimately I want to resign ec2-user for systems management tasks and use a non-full root user for administering the applications (stop and start mysql, httpd, edit apache's vhost files, and upload / edit web content under the web root)

Read the article

Exchange Online - granting admin rights on a multi-domain account

- by user1571299

I'm the admin of a handful of domains on Office 365. The thing is some of my clients would like to manage their mailboxes by themselves. So I started looking into it and the closest I got was this page: http://community.office365.com/en-us/forums/158/p/20912/98083.aspx I created a Group Role with a Write Scope according to that post. I also assigned the Reset Password, Recipiants Creation, Mail Recipients and Distribution Groups rolls. But unfortunately that just doesnt work. The user in question is still unable to manage anything. Any suggestions?

Read the article

Why does an error appear every time I try to open the Ubuntu Software Center? [duplicate]

- by askubuntu7639

This question already has an answer here: How do I remove a broken software source? 3 answers There is a glitch on the Ubuntu Software Center and whenever I open it an error appears and it keeps loading and never opens. Why does this happen? I have installed Ubuntu 13.04 on a disk and partitioned it. Please help me and ask for excess information if you need it. If you know of any duplicates please show me them!! This is the output of a question someone asked me. SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list This next output is the output of cat /etc/apt/sources.list.d/medibuntu.list </div> <div style="float:left;"> <div class="textwidget"><script type="text/javascript"> </div> Unixmen Archive Select Month September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 September 2012 August 2012 July 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 2009 December 2008 Tags Cloudandroid apache browser Centos chrome command line Debian eyecandy Fedora firefox games gaming gnome google karmic koala kde libreoffice Linux linux distribution LinuxMint lucid lynx maverick meerkat mysql news oneiric ocelot openoffice opensource opensuse oracle ppa Precise Pangolin release RHEL security server software themes tools ubuntu unix upgrade virtualbox vlc windows wine Unixmen Twitts Firefox 16, a treat for developers http://t.co/cnd27CzT Ubuntu 12.10 ‘Quantal Quetzal’: Beta 2 Sneak Peek http://t.co/hd4LwDOy Top 5 security Myths about Linux; and their realities http://t.co/zO1LgHST About Us Advertising Sitemap Privacy Contact Us Hire Us Copyright © 2008-2013 Unixmen.com . Maintained by Unixmen . /* */ jQuery(document).on('ready post-load', easy_fancybox_handler ); http://www.w3-edge.com/wordpress-plugins/ Page Caching using apc Database Caching 3/186 queries in 0.035 seconds using apc Content Delivery Network via 180016988.r.cdn77.net Served from: www.unixmen.com @ 2013-09-25 01:38:14 by W3 Total Cache

Read the article

A (slight) Change of Focus

- by StuartBrierley

When I started this blog in September 2009 I was working as a BizTalk developer for a financial institution based in the South West of England. At the time I was developing using BizTalk Server 2004 and intended to use my blog to collate and share any useful information and experiences that I had using this version of BizTalk (and occasionally other technologies) in an effort to bring together as many useful details as I could in one place. Since then my circumstances have changed and I am no longer working in the financial industry using BizTalk 2004. Instead I have recently started a new post in the logistics industry, in the North of England, as "IT Integration Manager". The company I now work for has identified a need to boost their middleware/integration platform and have chosen BizTalk Server 2009 as their platform of choice; this is where I come in. To start with my role is to provide the expertise with BizTalk that they currently lack, design and direct the initial BizTalk 2009 implementation and act as lead developer on all pending BizTalk projects. Following this it is my hope that we will be able to build on the initial BizTalk "proof of concept" and eventually implement a fully robust enterprise level BizTalk 2009 environment. As such, this blog is going to see a shift in focus from BizTalk 2004 to BizTalk 2009 and at least initially is likely to include posts on the design and installation of our BizTalk environment - assuming of course that I have the time to write them! The last post I made was the start of a chapter by chapter look at the book SOA Patterns with BizTalk Server 2009. Due to my change of job I am currently "paused" half way through this book, and my lack of posts on the subject are directly as a result of the job move and the pending relocation of my family. I am hoping to write about my overall opinion of this book sometime soon; so far it certainly looks like it will be a positive one. Thanks for reading; I'm off to manage some integration.

Read the article

BizTalk 2009 Message error - The following procedure call failed...

- by Muralidhar

Very freequently the following error is getting logged into Application event logs on my BizTalk 2009 VM. But this error is inconsistent. Any clues? The following stored procedure call failed: " { call [dbo].bts_UpdateMsgbox_BizTalkServerApplication}". SQL Server returned error string: "Warning: The join order has been enforced because a local join hint is used.;Warning: The join order has been enforced because a local join hint is used.;Duplicate key was ignored.".

Read the article

When learning C, should one only refer to resources published from 2007 onward?

- by Adam Siddhi

I ask this question because the international standardization subcommittee for programming languages, or ISO/IEC JTC1/SC22 Programming languages, states on this page: http://www.open-std.org/JTC1/SC22/WG14/www/standards that Technical Corrigendum 3, the latest one, was published in 2007. Now I take it that this means the C language it self was changed and that the books and tutorials pre-2007 may contain outdated information. Please correct me if I am wrong. Thanks, Adam

Read the article

Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

- by bob franklin smith harriet

I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

Read the article

Is this way of using Excel 2007 Pivot table for BI scalable ?

- by Sim

Hi all, Background: We need to consolidate sales data across the country to do analysis Our Internet connection/IT expertise/IT investment is not quite strong, therefore full BI solution is out of question I tried several SaaS BI solution (GoodData, ZohoReports) and while they're good, they seem not to fully support what we need We're looking at 'bout 2 millions record for every 2 months My current approach Our (10) sites currently gathers data from all their branches and consolidate them into 1 Excel file with Pivot table and embed source data In HQ, I will request 10 sites to send back those Excel files periodically We will import those Excel to our MSSQL server There will be a master Excel file, that will also have the same pivot table (as those came from site Excel file), and datasource is the MSSQL server More details For testing, I currently use MSSQL 2008 Express on my laptop So far, I imported our transactions for the past 2 months and there are 2 millions+ row in 1 table in MSSQL (we just use 1 table, corresponding to our common pivot table structure). DB size is ~ 600 MB In the master Excel file, if not including the source data, it's just < 10MB. Including the source data will increase the size to 60 MB (so I supposed Office 2007 automatically zip the data ?) I try using the Pivot (drag-and-drop fields) and the performance so far is OK (my laptop specs: C2D T7200, 3GB RAM, Windows XP) So my question is : If we're looking at full year transaction (roughly 15 millions rows in MSSQL 2008 Express, 3.6 GB in size), is there any issue with that 15 million rows in 1 table in SQL Express ? Is there any performance issue with the pivot table at that time ? Can it still embed the source data ? (I google-ed but didn't find the maximum size of source data Excel 2007 can embed) Any other suggestions on how we can better do this ? Given that we can't afford the full BI solution, any light-weight/budget/SaaS BI that you can recommend ? Thanks

Read the article

Outlook 2007 - repainting (?) problems when copying and pasting between windows: have to switch focus before pasted text is visible

- by Rory

For some time now I've had a problem when copying and pasting between Outlook 2007 windows, or from other office apps into Outlook 2007. When I paste, say into a new email, the email window's text area goes blank. The window isn't 'not responding', the To and Subject contents are still visible, but it looks like all the text in the email has been deleted. Initially I thought it was just taking ages to paste, but it turns out I need to switch focus to another window and then switch focus back to the Outlook window. Only then does the body of the email repaint itself. It's at the point that I click onto the Outlook window that the body area changes from blank white to showing all the text that was there before plus the pasted text. Any ideas? I've updated my graphics driver. Not sure what else it could be. I do sometimes have similar problems in Visual Studio 2010 too: when I paste text into a code window it doesn't show immediately, but the rest of the window shows what was there before I pasted. I'm using Win XP with all updates applid, on a Dell Vostro 1510.

Read the article

Windows XP autostart process as administrator

- by Zulakis

I am looking for a way with which i can autostart a certain program on logon of a user with user-rights with administrator-rights. I already tried using task scheduler but it didn't work out because you got to enter a username with format machine\user and our pxe-image-deployment-system automatically patches the machine names so the entered domain\user stopped working. UPDATE: the runas.exe command does not seem appropiate for this task, too. If using /user:machinename\Administrator /savcred it is invalid after imaging. What one user suggested was using .\Administrator or localhost\Administrator but both didn't work on my XP SP3 machines.

Read the article

How to read time phased data from Project Server 2007 directly from Project Server Database ?

- by Nikhil Vaghela

I am working on a custom web part for Project Web Access, for Project Server 2007. We are so far using PSI web services only to read and write data from and to Project Server 2007 databases. But there is a signinficant performance issue when you retrieve time phased data through Statusing web service, it is basically an expensive call for querying time phased data for each tasks. I want to access Time phased data entered by user for each tasks by directly hitting the Project Server Database. [ I do not want the solution suggested at this link : http://blogs.msdn.com/project_programmability/archive/2007/05/24/getting-at-the-task-time-phased-data.aspx as it reads data from reporting database which gets entry only after the project is published. ] I want to get time phased data as soon as user enters it. Any idea ? Thanks.

Read the article

devise roles: different roles, in some cases same rights

- by mattherick

I have two roles in devise. The first is the admin and the second the normal user-role. Now I´d like to give these two groups in some cases same rights with before filters. How does this work? I have: before_filter :authenticate_user!, :only = [:new, :create] before_filter :authenticate_admin!, :only = [:new, :create, :edit, :update, :destroy] But now only a user can :new and :create...the admin not.. What I have to do here? Thanks, Mattherick

Read the article

Sharepoint - Information Rights Management error

- by Chris Ballance

When navigating to a layouts page, I receive the following error: Information Rights Management (IRM): Protector {GUID} could not be created as a generic COM object (IUnknown). Protector: {GUID} A similar issue was reported here Has anyone encountered this?

Read the article

IIS Manager IIS6 Rights Management on Windows Server 2003

- by Chris

We are using a dedicated hosting provider to host several of our public websites. There are two development teams/divisions within our company who each maintain public websites on these same servers. Is there a way through ACLs or some sort of rights management (e.g. individual logins) that I would only be able to see and maintain only my public sites and the other development team could only see and maintain their sites? Thanks! Chris

Read the article

selecting rows with unidentical values appearing in two different columns in R

- by bazon

Hi, I need to create a new data frame that excludes dams that appear in "dam1" and "dam2" columns on the same fosdate (fostering date). I tried df <- df[df$dam1!=dam2,] but could not work. dam1 and dam2 are dam or mother id's. my df: fosdate dam1 dam2 8/09/2009 2Z523 2Z523 30/10/2009 1W509 5C080 30/10/2009 1W509 5C640 30/10/2009 1W509 1W509 1/10/2009 1W311 63927 The new data frame that I need to get is: dfnew: fosdate dam1 dam2 30/10/2009 1W509 5C080 30/10/2009 1W509 5C640 1/10/2009 1W311 63927 Thanks, Bazon

Read the article

SQL Server Server query - Count distinct DateTime field

- by strakastroukas

Supposing we have the following records in an SQL Server table. Date 19/5/2009 12:00:00 pm 19/5/2009 12:15:22 pm 20/5/2009 11:38:00 am What is the SQL syntax for getting something like this one? Date Count 19/5/2009 2 20/5/2009 1

Read the article

WSS 3.0 : Retrieve user permission rights

- by est

Hi all, may I know how can i retrieve user's permission rights from its userid and group name. Help urgently needed. Thanks in advance!

Read the article

How programmable detect if a user has admin rights (can run installer)

- by Zaky

Hi in my code I need to detect if current user has rights to install other application (other application VC2005 redist. package)... and it should work on Vista. As I understand CheckTokenMembership or IsAdministrator do not give a complete solution. Thank you

Read the article

Get consolidated results with following tables

- by Ted

I have a scenario. Here's my table structure is: ID LoginDate RemovalDate ---------------------------------------- 1 2009/08/01 NULL 2 2009/09/12 2010/01/02 3 2009/08/31 2009/10/29 4 2010/02/17 NULL 5 2009/10/18 2009/11/22 I want a consolidated results of how many ID's were not removed in a particular month. So the result set should be Date NotRemoved_ID -------------------------- 2009/08 2 2009/09 3 2009/10 3 [One ID got removed in 2009/10] 2010/02 2 [Two got removed in 2009/11 and 2010/01] Please help.

Read the article

help with sql-server query - dates

- by Gold

hi i have this table: id|date 1 | 10/11/2009 2 | 13/11/2009 1 | 20/12/2009 3 | 21/12/2009 1 | 30/12/2009 if i stand on the last record (id=1) and i need to see the last date where id=1 is appear -- will show me: 1 | 20/12/2009 what query will do it ? thank's in advance

Read the article

Oracle Tutor: * CAUTION to Word .docx Users *

- by [email protected]

Microsoft released a security update KB969604 for Office 2007 (around June 2009) This update causes document variables within Word docx files to be scrambled. This update might still be pushed out via Office 2007 updates DO NOT save files as docx using MS OFFICE 2007 until you apply the MS hotfix # 970942 available here If you are using Windows XP with Office 2003 or Office 2000 and have installed an older Office 2007 compatibility pack, documents saved as docx may also cause the scrambled document variables. Installing the 2007 compatibility pack published on 1/6/2010 (version 4) will prevent the document variables from becoming corrupt. Those on Windows 2000 may not be able to install the latest compatibility pack, or the compatibility pack may not function properly. This situation will hopefully be rectified in the coming months. What is a document variable? Document variables store data inside the document, invisible to the user. The Tutor software uses them when converting the document to HTML and when creating the flowchart, just to name a couple of uses. How will you know if a document's variables are scrambled? The difficulty in diagnosing the issue is that the symptoms can take myriad forms. There isn't a single error message or a single feature that one can point to and say, "test for the problem by doing this." The best clue about the error is seeing any kind of string in an error message that has garbage characters, question marks, xml code snippets, or just nonsense. Such as "Language ?????????????xlr;lwlerkjl could not be found." It is also possible to see the corrupted data in the footers of the Word docs. And, just because the footers look correct does not mean that the document variables are not corrupted. The corruption problem does not occur in every document variable in the document, just some of them. Often it is less than a quarter of them. What is the difference between docx files and doc files? Office 2007 uses Office Open XML formats with .docx and .docm filename extensions. - Docx is an Office Open XML word document. - Docm is a macro enabled Office Open XML document. This means the file structure behind the scenes is quite different from the binary file formats used prior to Office 2007 such as .doc, .dot, .xls, and .ppt. Solution Summary: For Windows XP and Word 2007: Install the hotfix, or save files as *.doc For Windows XP and Word 2000 and 2003: Install the latest compatibility pack or save files as *.doc For Windows 2000 with Word 2000 or 2003, do not use any compatibility pack, save files as *.doc Emily Chorba Principle Product Manager for Oracle Tutor

Search Results

Search found 9012 results on 361 pages for 'paula ditallo 2007 2009 all rights reserved'.

Page 94/361 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101 | Next Page >

- by DemonWareXT

- by SCO

- by BlueToast

- by FlyOn

- by Johan

- by user1571299

- by askubuntu7639

- by StuartBrierley

- by Muralidhar

- by Adam Siddhi

- by bob franklin smith harriet

- by Sim

- by Rory

- by Zulakis

- by Nikhil Vaghela

- by mattherick

- by Chris Ballance

- by Chris

- by bazon

- by strakastroukas

- by est

- by Zaky

- by Ted

- by Gold

- by [email protected]

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101 | Next Page >