Search Results

Search found 5864 results on 235 pages for 'secure gateway'.

Page 94/235 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • How to make Windows 7 use the internet connection that I specify

    - by user138957
    I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

    Read the article

  • Network throughput issue (ARP-related)

    - by Joel Coel
    The small college where I work is having some very strange network issues. I'm looking for any advice or ideas here. We were fine over the summer, but the trouble began few days after students returned to campus in force for the fall term. Symptoms The main symptom is that internet access will work, but it's very slow... often to the point of timeouts. As an example, a typical result from Speedtest.net will return .4Mbps download, but allow 3 to 8 Mbps upload speed. Lesser symptoms may include severely limited performance transferring data to and from our file server, or even in some cases the inability to log in to the computer (cannot reach the domain controller). The issue crosses multiple vlans, and has effected devices on nearly every vlan we operate. The issue does not impact all machines on the network. An unaffected machine will typically see at least 11Mbps download from speedtest.net, and perhaps much more depending on larger campus traffic patterns at the time. There is one variation on the larger issue. We have one vlan where users were unable to log into nearly all of the machines at all. IT staff would log in using a local administrator account (or in some cases cached credentials), and from there a release/renew or pinging the gateway would allow the machine to work... for a while. Complicating this issue is that this vlan covers our computer labs, which use software called Deep Freeze to completely reset the hard drives after a reboot. It could just the same issue manifesting differently because of stale data on machines that have not permanently altered low-level info for weeks. We were able to solve this, however, by creating a new vlan and moving the labs over to the new vlan wholesale. Instigations Eventually we noticed that the effected machines all had recent dhcp leases. We can predict when a machine will become "slow" by watching when a dhcp lease comes up for renewal. We played with setting the lease time very short for a test vlan, but all that did was remove our ability to predict when the machine would become slow. Machines with static IPs have pretty much always worked normally. Manually releasing/renewing an address will never cause a machine to become slow. In fact, in some cases this process has fixed a machine in that state. Most of the time, though, it doesn't help. We also noticed that mobile machines like laptops are likely to become slow when they cross to new vlans. Wireless on campus is divided up into "zones", where each zone maps to a small set of buildings. Moving to a new building can place you in a zone, thereby causing you to get a new address. A machine resuming from sleep mode is also very likely to be slow. Mitigations Sometimes, but not always, clearing the arp cache on an effected machine will allow it to work normally again. As already mentioned, releasing/renewing a local machine's IP address can fix that machine, but it's not guaranteed. Pinging the default gateway can also sometimes help with a slow machine. What seems to help most to mitigate the issue is clearing the arp cache on our core layer-3 switch. This switch is used for our dhcp system as the default gateway on all vlans, and it handles inter-vlan routing. The model is a 3Com 4900SX. To try to mitigate the issue, we have the cache timeout set on the switch all the way down to the lowest possible time, but it hasn't helped. I also put together a script that runs every few minutes to automatically connect to the switch and reset the cache. Unfortunately, this does not always work, and can even cause some machines to end up in the slow state for a short time (though these seem to correct themselves after a few minutes). We currently have a scheduled job that runs every 10 minutes to force the core switch to clear it's ARP cache, but this is far from perfect or desirable. Reproduction We now have a test machine that we can force into the slow state at will. It is connected to a switch with ports set up for each of our vlans. We make the machine slow by connecting to different vlans, and after a new connection or two it will be slow. It's also worth noting in this section that this has happened before at the start of prior terms, but in the past the problem has gone away on it's own after a few days. It solved itself before we had a chance to do much diagnostic work... hence why we've allowed it to drag so long into the term this time 'round; the expectation was this would be a short-lived situation. Other Factors It's worth mentioning that we have had about half a dozen switches just outright fail over the last year. These are mainly 2003/2004-era 3Coms (mostly 4200's) that were all put in at about the same time. They should still be covered under warranty, buy HP has made getting service somewhat difficult. Mostly in power supplies that have failed, but in a couple cases we have used a power supply from a switch with a failed mainboard to bring a switch with a failed power supply back to life. We do have UPS devices on all but three of four switches now, but that was not the case when I started two and a half years ago. Severe budget constraints (we were on the Dept. of Ed's financially challenged institutions list a couple years back) have forced me to look to the likes of Netgear and TrendNet for replacements, but so far these low-end models seem to be holding their own. It's also worth mentioning that the big change on our network this summer was migrating from a single cross-campus wireless SSID to the zoned approach mentioned earlier. I don't think this is the source of the issue, as like I've said: we've seen this before. However, it's possible this is exacerbating the issue, and may be much of the reason it's been so hard to isolate. Diagnosis At first it seemed clear to us, given the timing and persistent nature of the problem, that the source of the issue was an infected (or malicious) student machine doing ARP cache poisoning. However, repeated attempts to isolate the source have failed. Those attempts include numerous wireshark packet traces, and even taking entire buildings offline for brief periods. We have not been able even to find a smoking gun bad ARP entry. My current best guess is an overloaded or failing core switch, but I'm not sure on how to test for this, and the cost of replacing it blindly is steep. Again, any ideas appreciated.

    Read the article

  • Same network same switch but computers can't talk "ping"to eachother [closed]

    - by Sue
    Possible Duplicate: How does IPv4 Subnetting Work? Each computer(all 2 of them) can ping the router but can't ping each-other and firewall is off. Same default gateway, IP address very similar (just two number away at end) but the subnet mask is different between these two computers. One ends in 192 the other 224. There is a switch between them that then connects to the router. Why can't the computers ping each-other?

    Read the article

  • Managing hosts and iptables in scalable architecture

    - by hakunin
    Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

    Read the article

  • How to direct outgoing traffic through specific interface?

    - by user1434058
    I added eth1 and eth2 to my Ubuntu Server, all 3 use DHCP and are on the same lan eth0 10.0.0.41 eth1 10.0.0.42 eth3 10.0.0.43 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default router.net 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth1 10.0.0.0 * 255.255.255.0 U 0 0 0 eth2 curl --interface eth1 www.google.com doesn't work what else do i need to do for the above to work?

    Read the article

  • Share the same subnet between Internal network and VPN Clients

    - by Pascal
    I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

    Read the article

  • Two DHCP Servers, Block Clients for one of them?

    - by Rilindo
    I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

    Read the article

  • new PC not work with existing router, but works fine when directly connecting to cable modem

    - by user34786
    I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

    Read the article

  • Windows 7 reboot and freezing, possible power problems?

    - by mikelbring
    My Gateway LX Series desktop is about 6-8 months old. When I bought it, it had Windows Vista. I then put the RC version of Windows 7 on it. About 3 months after I bought it, it would randomly start to reboot, actually just shut off. I monitored the temperature levels and they seemed normal. So I installed a fresh Windows 7 Ultimate OEM 64bit. It actually got worse and would reboot more frequently. I then contacted Gateway and they said my machine was built for Windows Vista (made me chuckle), and told me to update my BIOS. So I did, and it was fixed for a good couple months. Recently, it started to do it again. Now I noticed early on it was doing it most often, if not every time when I was either watching a flash video or playing a flash game. So I decided to download the drivers again and I also downloaded my motherboard drivers. Seemed to be okay. A week later it started doing it again. And now it's doing it even more frequently. Sometimes I would turn it on, login into Windows and *BAM!* it would shut off. Now I am at the point where I can hardly get it to turn on. It would freeze at the point where it says "Starting Windows", with the Windows logo. Sometimes it would say "Checking disk for consistency" or whatever and freeze there (not shut off, just freeze). I even got the prompt to launch startup repair. But that also freezes when it says starting Windows. It does not really freeze, just never loads up. I am kind of lost as to what's going on. I have a few ideas but nothing I want to pursue (graphics card? hard drive?). Another thing I did try was to boot into a live disk of Ubuntu and try to launch every program I could and get on the internet but I never got it to reboot. So it sounds like to me it's a Windows thing, but I have no idea. I am just stuck and would like to see if any one has any ideas or could lead me in the right direction.

    Read the article

  • can't find ip of wifi acess point

    - by Crash893
    I setup an wireless AP (linksys wifi router) to have no dhcp and point to the main router as the default gateway. I also set it up to obtain a ip from the network but when i go to my main router and look for it i don't see any ip's that it could be If i use net stumbler i can see the mac address of the wifi portion of it but Im at a loss how to get into the web console of this router any ideas on how to "find" this router?

    Read the article

  • Darkstat unable to show recent statistics.

    - by Caterpillar
    Hello All.. We have a debian machine running with firewall / gateway. We have deployed darkstat on it. When we installed darkstat it was showing statistics properly. After few days it stopped showing recent statistics. The data was getting appended to existing one. Please anyone tell me what could be the problem. Thanks In Advance.

    Read the article

  • Two routers network routing settings

    - by xiamx
    I have two routers, Router A is connected to the internet, and Router B is connected to the LAN port of Router A. Router A: 192.168.1.1 Subnet 255.255.255.0 Router B: IP leased from router A: 192.168.1.2 gateway 192.168.0.1 subnet 255.255.255.0 I have a machine C plugged to router A with ip 192.168.1.3 also a machine D plugged to router B with ip 192.168.0.199 I want to access machine D from a machine C. What settings do I need to change to do that?

    Read the article

  • No internet connection with Cisco VPN

    - by Macros
    I have a VPN connection set up using the Cisco VPN Client, and whenever I connect to it I lose my internet connection. This is the first time I have used this software, all previous VPNs I have used have been setup through Windows and I can uncheck the 'use remote gateway' box in the TCP-IP properties box to get around this. Is there a similar option in the Cisco Client that I am missing? I am running on Windows 7 32 bit

    Read the article

  • How does Windows 7 detect my switches?

    - by Daniel
    I notices in the Network overview of Windows 7 that my switches are found on the path to the gateway, which baffled me completely. The last time I checked they just took the ethernet packages and transported them to the "right" location. How does this switch detection work? Do switches alter the packages? Do they react on ICMP messages?

    Read the article

  • migrate old bootable wd harddrive to new 500 gb hd which was just used for storage and has stored programs on it , id like 500gb to be botable

    - by tom
    id appreciate any help in this matter this is in laptop with 2 harddrive bays. i have a wd scorpio that has become 2 small its bootable with windows 7, i have pretty new 3 months old hitachi hd500gb i was using for storage-backup of programs it is not bootable and id like to make it that way without losing saved backed up info on it is there any way to do this, id like to keep only 500gb bootable hard drive due to weight of laptop its 10.lbs desktop replacement gateway p-7805u thanks for your help in advance on this matter, tommy

    Read the article

  • How to route traffic from one subnet through a specific SOCKS proxy in other subnet?

    - by Yegor Razumovsky
    Here is my network map: Internet | | Router (192.168.1.1) | | (192.168.1.100) (wireless) MacBook ( mac os x / windows 7 / ubuntu. It doesn't matter ) (192.168.2.1) (wired) | | TargetComputer (192.168.2.2) I want to route all traffic from TargetComputer 192.168.2.2 through socks proxy running on my macbook. On target computer i can only change IP settings ( ip address, subnetmask, gateway, dns ).

    Read the article

  • How can I trick ssh to connect using different configurations based on current location?

    - by Sorin Sbarnea
    Here is the following use case: wanting to ssh server1 in 3 scenarios: server1 is on current network, go for it server1 is not on current network and you need to use a gateway (gw1) to access it, not a big problem as you can use ~/.ssh/config to define tunnelling for this you are on a network that does not allow you to access the first gw1, so you'll use gw2 for that. Desired outcome: be able to use the same command and be able to connect to the server.

    Read the article

  • Local dns for testing websites using mobile devices

    - by Morpheu5
    Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

    Read the article

  • Ubuntu Server static IP

    - by FoxyShadoww
    I am trying to give my server a static ip address. This seems to work without any problems, but I can't seem to get an internet connection after this process. I've also changed my dns server to 8.8.8.8 (google dns right?). OS: Ubuntu Server 12.04 x86 Environment: Virtualbox File: /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.2.10 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1

    Read the article

  • Postifix SMTP Load Balance

    - by user103373
    I want to load balance outbound emails between 3 post-fix gateways for sending mails only reason is to use multiple different source IPs to increase throughput & inbox delivery. Each gateway should receive an approximately equal amount of outbound messages. How is it possible please suggest. +---------- smtp A --------- Internet | clients -------- smtp lb ----- smtp B --------- Internet | +---------- smtp C --------- Internet

    Read the article

  • I have a collection of dead consumer grade routers, should I buy a real one?

    - by Ex Networking Guy
    Am I crazy for considering purchasing a Cisco 2621 for the house? I am familiar enough with IOS to set up a simple gateway router, I don't really need the experience. At this point, I'm a developer so my days of crawling through CO's and under desks are long past me. But I am really sick of crappy consumer grade networking gear. Maybe I have lousy luck and this stack of WRTG54s is just because I have lousy power, or whatever.

    Read the article

  • debian lenny : problem modifying static ip

    - by supertiti
    hello all, i'm trying to change a static ip assigned to a debian VM. I modified the /etc/network/interfaces file but my debian doesn't seem to like the new settings currently the machine's ip is set to 192.168.1.136 and i want the machine's ip to be set to 192.168.1.8 here's my modified /etc/network/interfaces : auto lo iface lo inet loopback allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.1.8 gateway 192.168.1.1 netmask 255.255.255.0

    Read the article

  • domain/IN: has no NS records

    - by thejartender
    I have set up a home web server using Ubuntu 12.10 and I can safely say that it works with regards to router forwarding and ports being found. I know this, because switched my hosting provider's VPS SOA record to use my ISP IP with an 'A' value and had my website running from home. This verified that my server was configured correctly so I started what I believe to be the final step in making my old desktop into a full DNS server. I found this tutorial that got me started My LAN network consists of the following: My router with a gateway of 10.0.0.zzz My server with an IP of 10.0.0.xxx A laptop with an IP of 10.0.0.yyy Step 1: I installed bind via sudo apt-get install bind9 Step2: I configured /etc/bind/named.conf.local with: zone "sognwebdesign.no" { type master; file "/etc/bind/zones/sognwebdesign.no.db"; }; zone "0.0.10.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.0.10.in-addr.arpa"; }; Step3: Updated /etc/bind/named.conf.options with two ISP DNS addresses Step 4: Updated /etc/resolv.confwith: nameserver 10.0.0.xxx search lan search sognwebdesign.no Step5: created a ``/etc/bind/zones directory Step6: Created /etc/bind/zones/sognwebdesign.no.dbwith: $TTL 3D @ IN SOA ns.sognwebdesign.no. admin.sognwebdesign.no. ( 2007062001 28800 3600 604800 38400 ); sognwebdesign.no. IN NS ns1.sognwebdesign.no. sognwebdesign.no. IN NS ns2.sognwebdesign.no. sognwebdesign.no. IN NS ns3.sognwebdesign.no. NS1 IN A 10.0.0.1 NS2 IN A 10.0.0.2 NS3 IN A 10.0.0.3 www IN A 10.0.0.4 yuccalaptop IN A 10.0.0.19 gw IN A 10.0.0.138 TXT "Network Gateway" Step 7: created/etc/bind/zones/rev.0.0.10.in-addr.arpawith: $TTL 3D @ IN SOA ns.sognwebdesign.no. admin.sognwebdesign.no. ( 2007062001 28800 604800 604800 86400 ); zzz IN PTR gw.sognwebdesign.no. 1 IN PTR ns1.sognwebdesign.no. 2 IN PTR ns2.sognwebdesign.no. 3 IN PTR ns3.sognwebdesign.no. yyy IN PTR yuccalaptop.sognwebdesign.no. I then restart bind and dig-x sognwebdesign.no and it works Lastly I perform named-checkzoneon each of my zone files, but me reverse zone fail fails with: sognwedesign.no/IN: has no NS records Can anyone explain what I am doing wrong here or assist me in getting this configured correctly?

    Read the article

  • What is "Disable class based route addition" good for?

    - by JRoppert
    In the advanced TCP/IP settings of a VPN connection, i found a checkbox labeled with "Disable class based route addition". The checkbox is only enabled as long as "Use default gateway on remote network" is switched off. What is "Disable class based route addition" good for? Detailed instructions to find the settings: Open Properties of VPN connection Go to Networking tab Open Properties of "Internet Protocol Version 4 (TCP/IPv4)" (and/or TCP/IPv6) Click "Advanced..." Button Change to "IP Settings" tab Here you can find the checkboxes mentioned above

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >