Search Results

Search found 20052 results on 803 pages for 'software prerequisites'.

Page 94/803 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • Looking for comprehensive computer monitoring software

    - by cornjuliox
    Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

    Read the article

  • Free software for backing up an attached network drive

    - by Richard
    My wireless router comes with a USB connector which allows me to plug an external hard drive in and it'll act as a Network Attached Storage. The problem is that I want to backup this hard-drive to the external drive of another computer so that if the NAS drive fails, I don't lose everything. However, Windows 7 Backup refuses to include the NAS as a location to backup. I can't fool it by mapping it to a drive letter either. Google presents lots of pages on how to backup files to a NAS, but not the other way around. Can anyone advise me on free software which can do incremental backups of a NAS drive to an external drive attached the computer it is running on? I'm aware of this question but the top answers have one or more of the following issues: They aren't free. The free version cannot backup a NAS. They cannot do incremental backups. They're just a script and therefore have limited other functionality (eg. disk space management, scheduling, compression, etc.etc.)

    Read the article

  • Need advise for choosing software\hardware for virtualization.

    - by Anatoly
    Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

    Read the article

  • Good process/software for organizing photos past/present

    - by Matthew
    So I have tons of photos taken all the time. I have a lot from years past that I never went through (meaning deleting duplicates, etc). I've got a new pc with windows 7, and I'm wondering what a good process is to organize those photos. They're in folders that have really no meaning (it used to be people would put them in a folder wherever, even the desktop or somewhere else, not just the My Pictures folder). I'm going to keep all pictures in the "My Pictures" folder from now on. I've used Picasa from g=Google, and it works great. Is this the recommended free software for this? What process do I use to move the old pictures over in to new "organized" folders? Lately in Picasa when I import off my camera card, I would just select something that names the folder after the date it was taken. Is this advised? Just give me ideas on how to stay organized with photos. Should I tag them also? Should I rename the file names? Keep in mind I have over 16,000 photos I'll have to go through, so it can't be anything to thorough.

    Read the article

  • Photo managing software that supports network drives?

    - by musicfreak
    My dad is a photographer in his free time, and he's been using Lightroom to manage his photos. However, recently, we put all of our photos on a NAS drive to allow us to access them from any computer at any time. The problem with this is that Lightroom cannot load catalogs from network drives. We need support for network drives because we'd like to be able to browse the photos from any computer, and for any computer to be able to add photos to the collection. Right now we're just syncing the Lightroom catalog file between us, but the extra step is a pain, and doing it manually makes it error-prone. Is there any software (free or commercial) that has proper support for network drives? The only real feature I need is to be able to sort photos by date and by some sort of tags. I don't need any editing features like those found in Lightroom; my dad is comfortable using Photoshop to edit photos. Also, if there is another solution to this that I haven't thought of, feel free to share.

    Read the article

  • Desktop Provisioning for a Small Linux Software Development Team

    - by deakblue
    Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

    Read the article

  • Webcam security camera software that runs as a service

    - by hurfdurf
    I've been looking for Windows webcam software that will run as a Windows service without any user login. The goal is to use the webcam as a cheap security camera and log the results to secure networked storage (windows share, not FTP). The requirements are: Motion detection Video capture Runs as a service (should start recording immediately after reboot) Nice to have: Round-robin storage, e.g. 10Gb limit, oldest files overwritten/deleted when space gets low I've read the other webcam questions but still haven't stumbled across anything suitable. Evaluations thus far: Title MotionDetect Service Snapshots Video SpaceLimit License Yawcam Yes Yes Yes No No GPL WebCam ZoneTrigger Yes No Yes Yes No Commercial Dorgem Yes No Yes Yes No GPL AbelCam Yes No Yes Yes No Commercial Logitech Yes No Yes Yes No Paired with camera IspyConnect Yes No Yes Yes Yes Free SecureCam (SourcefoYes No Yes Yes No GPL AbelCam Yes No Yes Yes No Commercial Active WebCam Yes Yes(?) Yes Yes Volume Free Commercial WebCam Surveyor Yes No Yes Yes No Commercial WebCamsPy NA NA NA NA NA GPL Camera: Logitech Webcam Pro 9000 Windows 7 32-bit WebCamsPy failed to initialize so couldn't be tested So far, the contenders: Active Webcam comes the closest, and claims to run as a service, but i haven't been able to get it to record after a cold boot even though a service is running. Yawcam can be set up as a service but doesn't record video. IspyConnect has exactly the type of space limit I want and looks great, but doesn't run as a service (seems also to be a bit of a cpu hog) Any other suggestions? I'm locked into Windows so can't use linux Motion, which looks almost perfect. Any pointers to rich Windows webcam/motion detection libraries out there that could easily be turned into a command line program would also be appreciated.

    Read the article

  • Re-packaging commercial software into RPM packages

    - by gac
    The situation is this - I have a small CentOS 5 "cluster" (currently 7 machines, but potential for more) which run a commercially available software package that's distributed essentially in tarball format (it's actually a zip file with a mixture of Windows/Linux binaries and an installation shell script with no potential for automation). I'd like to re-package this somehow into an RPM package (ideally that I can throw onto a self-hosted yum repository) in order to keep these "cluster" machines both up to date and consistent. I could do 7 manual installations, but there's scope for error. As I understand it, I'll need to accomplish the following tasks: add a non-privileged user to the target system for running the daemon without unnecessary root privileges package the binary files themselves up from the final installation location on a separate build machine (probably under /opt/package for sanity's sake). No source is available. add a firewall hole in order for the end-users to be able to communicate with the "cluster" nodes add a cron task which can start the daemon on @reboot I'm coming up with plenty of good packaging resources so far, but all are based on the traditional method (i.e. if I were the vendor packaging up my source files), rather than re-packaging a ton of binary files from an already-installed instance of the application, which is the only option available to me. Anyone have any good resources they can share for achieving this goal? Thanks!

    Read the article

  • Repeated installation of malicious software to do outbound DDOS attack [duplicate]

    - by user224294
    This question already has an answer here: How do I deal with a compromised server? 12 answers We have a Ubuntu Vitual Private Server hosted by a Canadian company. Out VPS was affected to do "outbound DDOS attack" as reported by server security team. There are 4 files in /boot looks like iptable, please note that the capital letter "I","L". VPS:/boot# ls -lha total 1.8M drwx------ 2 root root 4.0K Jun 3 09:25 . drwxr-xr-x 22 root root 4.0K Jun 3 09:25 .. -r----x--x 1 root root 1.1M Jun 3 09:25 .IptabLes -r----x--x 1 root root 706K Jun 3 09:23 .IptabLex -r----x--x 1 root root 33 Jun 3 09:25 IptabLes -r----x--x 1 root root 33 Jun 3 09:23 IptabLex We deleted them. But after a few hours, they appeared again and the attack resumed. We deleted them again. They resurfaced again. So on and so forth. So finally we have to disable our VPS. Please let us know how can we find the malicious script somewhere in the VPS, which can automatically install such attcking software? Thanks.

    Read the article

  • Ubuntu 12.04 can't boot after installing with software RAID 1

    - by Bill
    I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

    Read the article

  • Failed Software RAID0 on Linux - Attempting to recover data

    - by Gizmo_the_Great
    I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

    Read the article

  • Best Places for Software Developer To Live

    - by Mike
    What is the single best area in which to live, in order to have a career in software development while also living an active, healthy life? Ideally, software and other types of jobs would be plentiful, the air and water clean, transportation reasonable, and outdoor activities plentiful and nearby.

    Read the article

  • Webshop software for your existing website [closed]

    - by Chris
    Hi, I know it's not programming related, but I just wanted to try my chances here... I'm searching for software which can integrate a webshop into an existing website. The most software is a standalone version or a module for some kind of CMS. Can anyone help me? I have a css/div based website at the moment.

    Read the article

  • Software tools for allowing end users to reprogram interfaces

    - by iceman
    What would be the examples of commercial software products (specially web-services) which allow the end user to reprogram their user-interface? I mean end users who do not know programming and they are allowed to add more functionality. One way of doing it is allowing XML gadgets like iGoogle does. What are the other approaches and also the technologies enabling them? This would be a futuristic application like collaborative software development for users.

    Read the article

  • Contract developer trying to get outsourcing contract with current client.

    - by Mike
    I work for a major bank as a contract software developer. I've been there a few months, and without exception this place has the worst software practices I've ever seen. The software my team makes has no formal testing, terrible code (not reusable, hard to read, etc), minimal documentation, no defined development process and an absolutely sickening amount of waste due to bureaucratic overhead. Part of my contract is to maintain a group of thousands of very poorly written batch jobs. When one of the jobs fails (read: crashes), it's a developers job to look at the source, figure out what's wrong, fix it, and check it in. There is no quality assurance process or auditing of the results whatsoever. Once the developer says "it works" a manager signs off and it goes into production. What's disturbing is that these jobs essentially grab market data and put it into a third-party risk management system, which provides the bank with critical intelligence. I've discovered the disturbing truth that this has been happening since the 90s and nobody really has evidence the system is getting the correct data! Without going into details, an issue arose on Friday that was so horrible I actually stormed out of the place. I was ready to quit, but I decided to just get out to calm my nerves and possibly go back Monday. I've been reflecting today on how to handle this. I have realized that, in probably less than 6 months, I could (with 2 other developers) remake a large component of this system. The new system would provide them with, as primary benefits, a maintainable codebase less prone to error and a solid QA framework. To do it properly I would have to be outside the bank, the internal bureaucracy is just too much. And moreover, I think a bank is fundamentally not a place that can make good software. This is my plan. Write a report explaining in depth all the problems with their current system Explain why their software practices fail and generate a tremendous amount of error and waste. Use this as the basis for claiming the project must be developed externally. Write a high level development plan, including what resources I will require Hand 1,2,3 to my manager, hopefully he passes it up the chain. Worst case he fires me, but this isn't so bad. Convinced Executive decides to award my company a contract for the new system I have 8 years experience as a software contractor and have delivered my share of successful software products, but all working in-house for small/medium sized companies. When I read this over, I think I have a dynamite plan. But since this is the first time doing something this bold so I have my doubts. My question is, is this a good idea? If you think not, please spare no detail.

    Read the article

  • Any software to auto generate doxygen comment blocks?

    - by Simone Margaritelli
    Hello, i'm developing a quite big C++ software and now (better late than neve :)) i've decided to document it in the doxy standards. There are plenty of classes, methods, functions, macros and so on therefore i'm searching for a software that would scan my source tree and insert doxy comment blocks on top of every "documentable item" to let me edit them later and add details such as methods description and so on. Some hint?

    Read the article

  • Software to Tune/Calibrate Properties for Heuristic Algorithms

    - by Karussell
    Today I read that there is a software called WinCalibra (scroll a bit down) which can take a text file with properties as input. This program can then optimize the input properties based on the output values of your algorithm. See this paper or the user documentation for more information (see link above; sadly doc is a zipped exe). Do you know other software which can do the same which runs under Linux? (preferable Open Source)

    Read the article

  • Evaluating software estimates: sure signs of unrealistic figures?

    - by Totophil
    Whilst answering “Dealing with awful estimates” posted by Ash I shared a few tips that I learned and personally use to spot weak estimates. But I am certain there must be many more! What heuristics to use in the scenario when one needs to make a quick evaluation of software project estimate that has been compiled by a third-party (a colleague, a business partner or an external company)? What are the obvious and not so obvious signs of weak software estimates that can be spotted without much detailed knowledge of task at hand?

    Read the article

  • PHP Doc software on OSX?

    - by NeoNmaN
    I use my OSX for dev. PHP and now i need to try PHPDoc but how? sombardy know a software? or how i can doe it? i try to look here http://manual.phpdoc.org/HTMLSmartyConverter/HandS/ric_INSTALL.html but i hobe i can found a GUI software the out. :) tanks for all help.

    Read the article

  • Experienced developer trying to get outsourcing contract with current client.

    - by Mike
    I work for a major bank as a contract software developer. I've been there a few months, and without exception this place has the worst software practices I've ever seen. The software my team makes has no formal testing, terrible code (not reusable, hard to read, etc), minimal documentation, no defined development process and an absolutely sickening amount of waste due to bureaucratic overhead. Part of my contract is to maintain a group of thousands of very poorly written batch jobs. When one of the jobs fails (read: crashes), it's a developers job to look at the source, figure out what's wrong, fix it, and check it in. There is no quality assurance process or auditing of the results whatsoever. Once the developer says "it works" a manager signs off and it goes into production. What's disturbing is that these jobs essentially grab market data and put it into a third-party risk management system, which provides the bank with critical intelligence. I've discovered the disturbing truth that this has been happening since the 90s and nobody really has evidence the system is getting the correct data! Without going into details, an issue arose on Friday that was so horrible I actually stormed out of the place. I was ready to quit, but I decided to just get out to calm my nerves and possibly go back Monday. I've been reflecting today on how to handle this. I have realized that, in probably less than 6 months, I could (with 2 other developers) remake a large component of this system. The new system would provide them with, as primary benefits, a maintainable codebase less prone to error and a solid QA framework. To do it properly I would have to be outside the bank, the internal bureaucracy is just too much. And moreover, I think a bank is fundamentally not a place that can make good software. This is my plan. Write a report explaining in depth all the problems with their current system Explain why their software practices fail and generate a tremendous amount of error and waste. Use this as the basis for claiming the project must be developed externally. Write a high level development plan, including what resources I will require Hand 1,2,3 to my manager, hopefully he passes it up the chain. Worst case he fires me, but this isn't so bad. Convinced Executive decides to award my company a contract for the new system I have 8 years experience as a software contractor and have delivered my share of successful software products, but all working in-house for small/medium sized companies. When I read this over, I think I have a dynamite plan. But since this is the first time doing something this bold so I have my doubts. My question is, is this a good idea? If you think not, please spare no detail.

    Read the article

  • Recommendations for project management software for Scrum

    - by Mendokusai
    We're using Scrum on our current project and we're very happy using our agile board and cards but reporting, burndown charts etc. are somewhat cumbersome to maintain. So, we're looking for good agile software to use instead. I'm keeping requirements deliberately vague but does anyone have any recommendations? The software would need to run on Windows.

    Read the article

  • Software Engineer, Developer, Programmer - Just a name?

    - by user51229
    I look at ads and the jobs seem to overlap. A lot of software engineer jobs even say CS or related degree so it doesn't seem like a degree in CS = software engineer. It seems like a programmer or developer with experience can transition to the role or become an "engineer". Or is the engineer just the same job with a fancy name... Is there really a difference or is it just HR throwing names around?

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >