Search Results

Search found 15099 results on 604 pages for 'stop loading'.

Page 94/604 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• How do I stop my ethernet network connection from dropping?

  - by Sean Hill

  My ethernet-based network connection doesn't stay up consistently. I'm running a ping against the gateway and it will: Work for a minute Freeze, time out, or give multi-second response times Repeat If it's stuck and I disable/enable networking through the network manager applet everything will work fine again for a minute. After 280 packets transmitted I'm getting 41% packet loss. I've tried a different cable and connection to the gateway but this had no effect. The distance to the gateway is just about 3 feet. Seems to work fine if I switch over to Windows, but Ubuntu is my main OS and I can't even use it right now as I depend on the network. My setup... OS: Ubuntu 11.04, dual-booting Windows 7 Mobo: Gigabyte Z68X-UD4-B3 CPU: Intel Core i7 2600K Edit A little clarification... Network Manager is still showing me as connected, but I am unable to reach to gateway or anything beyond. At no point does NM suggest the connection is lost and calling ifconfig shows that I still have an IP address. I tried connecting to a different gateway with a different cable and the same problem arises. As requested: lspci | grep -i eth 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -f [ 14.024709] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.026443] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 14.176101] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. [ 23.917731] eth0: no IPv6 routers present [ 726.109697] r8169 0000:07:00.0: eth0: link up [ 733.169494] r8169 0000:07:00.0: eth0: link up [ 753.930119] r8169 0000:07:00.0: eth0: link up [ 880.787332] r8169 0000:07:00.0: eth0: link up [ 1159.161283] r8169 0000:07:00.0: eth0: link up [ 1406.623550] r8169 0000:07:00.0: eth0: link up Edit @roland-taylor: Network is always available under Windows. Pings do not timeout, applications do not complain of no network availability, large downloads are not interrupted or slowed.

  Read the article

• How to stop programs on starting from returning to log in screen?

  - by Bruce McKean

  I'm not a computer nerd but have been able to fix Ubuntu/Linux problems in the pass two years with a Google search but this on has me stumped. I upgraded to 12.04 about thirty days ago and all was well except that every time I tried to load KeePassX it would go to the login screen. I installed KeePass2 and all seemed to work. Last week I tried to load Bibble5 (Raw photo editor) and it would try to load and then back to the login screen. After a few days I gave up and downloaded Corel After Shot Pro (Corel's now owns Bibble5) and it has the same problem. Could someone please head me into the steps I need to follow to find out what is the cause. I'm interested in learning more about the Linux system how to correct any future problems thanks in advance – Bruce -Computer- Processor : 8x Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz Memory : 8155MB (1092MB used) Operating System : Ubuntu 12.04 LTS OpenGL Renderer : GeForce GT 520/PCIe/SSE2

  Read the article

• How do I stop ubuntu from detaching minimize/maximuze/close buttons?

  - by Shahbaz

  Some time ago I managed to get ubuntu to keep the window menubars in the menu rather than the bar above (I'm not sure if this part is unity or compiz, or what's the difference). That was by removing indicator-appmenu Anyway, so now everything is fine except one thing: If I have a window that is full screen, the minimize/maximize/close buttons are still grabbed by the bar on the top. Usually this doesn't cause a problem because the upper-left corner of the full screen window and the whole screen are not too far apart. However, one thing happens to me a lot, and that is I am working on something (programming), then I need to check some things from other places so I open some windows, see what I want and switch back to my work. Those windows however are temporary so at some point I want to close them. Now here's what happens: I have the focus on some window and I can't close the maximized window behind it unless I click on the window first, so that the buttons appear and then close it. I couldn't find anything on the internet about this. Is this something that's hardcoded in unity/compiz/whatever or is there actually a way to configure this?

  Read the article

• How to fix? Gnome-shell shows up and instantly stop working

  - by Dario

  I am using ubuntu 12.04, but I love gnome shell, but not the Gnome Classic which comes installed. When I reinstalled, I instantly installed Gnome-shell by terminal using Unity, it worked for a while and then I started installing some extensions. I rebooted and it just stopped working, it shows up for a second, then I can only see my desktop with icons but without panels and I can't even use the terminal (CTRL + ALT + T) since the window doesn't really select when I click it. How could I fix this? I tried reinstalling Gnome-shell and all the stuff I installed for it, but now it doesn't work even without any extension.

  Read the article

• At what visitor share do you stop supporting a given browser?

  - by adam

  I'm lead dev for a large website which has a higher than average percentage of IE6 users - about 4.4% of our audience. Our new version is going to make use of progressive enhancement - including transitions and effects as well as rounded corners, gradients, web fonts and other CSS techniques. Obviously there are cross-browser ways to achieve most of these things which require various amounts of work to implement. What I'm currently looking into - and what I'd like your experiences of - is how to decide at what point we draw the line between providing an enhanced experience vs just supporting the functionality. FYI, I believe that this question meets the six guidelines for great subjective questions as defined in the FAQ. I'm after answers detailing why and how, not too short, with constructive comments, experiences, facts and references. Thanks! Adam

  Read the article

• How can I stop Ubuntu from automatically unmounting Samba shares?

  - by Billy ONeal

  I have some music files I'd like to listen to sitting on a Samba share. I added this share via the Ubuntu GUI (Places - Connect to server...), and everything worked just fine. However, despite the fact that my music file is playing from this location, after I've not touched the location using the Nautilus GUI, Ubuntu/GNOME decides that I'm not using the share anymore and terminates the connection. Thus, my music stops playing and Rhythmbox is unhappy with me. Simply clicking on the new shortcut the "Connect to server..." bit created for me immediately makes the files come back again and allows me to restart the music playing. How can I have Ubuntu not automatically dismount samba shares?

  Read the article

• loading 60 images locally fast is it possible...? [closed]

  - by Tariq- iPHONE Programmer

  when my app starts it loads 60 images at a time in UIImageView and it also loads a background music. in simulator it works fine but in IPAD it crashes.. -(void)viewDidLoad { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; //img.animationImages = [[NSArray arrayWithObjects: MyImages = [NSArray arrayWithObjects: //[UIImage imageNamed: @"BookOpeningB001.jpg"],...... B099,nil]; //[NSTimer scheduledTimerWithTimeInterval: 8.0 target:self selector:@selector(onTimer) userInfo:nil repeats:NO]; img.animationImages = MyImages; img.animationDuration = 8.0; // seconds img.animationRepeatCount = 1; // 0 = loops forever [img startAnimating]; [self.view addSubview:img]; [img release]; [pool release]; //[img performSelector:@selector(displayImage:) ]; //[self performSelector:@selector(displayImage:) withObject:nil afterDelay:10.0]; [self performSelector: @selector(displayImage) withObject: nil afterDelay: 8.0]; } -(void)displayImage { SelectOption *NextView = [[SelectOption alloc] initWithNibName:nil bundle:nil]; [self presentModalViewController:NextView animated:NO]; [NextView release]; } Am i doing anything wrong ? Is there any other alternative to load the local images faster in UIImageView !

  Read the article

• Temporary background image while the big one is loading? [migrated]

  - by Mikhail

  Is there a way, without javascript, to load a small image for a background before the real image is downloaded? Without javascript because I know how to do it with it. I can't test if the following CSS3 would work because it works too quick: body { background-image:url('hugefile.jpg'), url('tinypreload.jpg'); } If the tinypreload.jpg is only, say 20k, and the hugefile.jpg is 300k -- would this accomplish the task? I assume that both downloads would start at the same time instead of being consecutive.

  Read the article

• Loading main javascript on every page? Or breaking it up to relevant pages?

  - by Kyle

  I have a 700kb decompressed JS file which is loaded on every page. Before I had 12 javascript files on each page but to reduce http requests I compressed them all into 1 file. This file is ~130kb gzipped and is served over gzip. However on the local computer it is still unpacked and loaded on every page. Is this a performance issue? I've profiled the javascript with firebug profiler but did not see any issues. The problem/illusion I am facing is there are jquery libraries compressed in that file that are sometimes not used on the current page. For example jquery datatables is 200kb compressed and that is only loaded on 2 of my website pages. Another is jqplot and that is another 200kb. I now have 400kb of excess code that isn't executed on 80% of the pages. Should I leave everything in 1 file? Should I take out the jquery libraries and load only relevant JS on the current page?

  Read the article

• What is a good one-stop-shop for understanding software licensing information?

  - by Macy Abbey

  I've learned a fair amount about the various different software licensing models and what those models mean for my own software project. However, I'd like to make sure I understand as many of them as possible for making decisions on how to license my own software and in what scenarios I can safely use software under a licensing model. Do you have a good recommendation for a book/site etc.. that has this information in one location?

  Read the article

• How do GameEngines stop Pixel Seams appearing in adjacent mesh boundaries due to FP imprecision?

  - by ufomorace

  Graphics cards are mathematically imprecise. So when some meshes are joined by their borders, the graphics card often makes mistakes and decides that some pixels at the seam represent neither object, and unwanted pixels appear. It's a natural behaviour on all graphics cards. How are such worries avoided in Pro Games? Batching? Shaders? Different tangent vectors? Merging? Overlaping seams? Dark backgrounds? Extra vertices at borders? Z precision? Camera distance tweaks? Screencap of a fix that ended up not working:

  Read the article

• Is there a simple way to stop enemies standing in the same spot?

  - by Iain

  So: top-down game, my enemies chase the player, when they get within a certain distance they stand still and fire. If they're all coming from the same direction they all end up standing in the same spot (i.e. standing "within" each other), as I'm not currently doing collision detection between enemies - they are free to pass over each other. What's a simple way around this? Either some form of collision detection or some ai?

  Read the article

• When will my old page stop appearing on Google?

  - by Bane

  I recently bought a new address for my Blogger blog, from yannbane.blogspot.com to www.yannbane.com. However, www.yannbane.com addresses do not appear when they are searched for! Is this natural? How much time will it take for Google to update its index? yannbane.blogspot.com 301's to www.yannbane.com. Both are added to my Webmaster Tools account, but it shows no data for www.yannbane.com (strangely). And, finally, is there something I could do to speed up the process?

  Read the article

• How do I stop sound coming from my speakers with a faulty headphone socket?

  - by Andy

  On my laptop, I have a faulty headphone socket, so when I insert headphones into it, the speakers do not mute. I can confirm that this problem is caused by faulty hardware and not software as when I twist the headphone jack, the speakers come on and off according to the movements. On previous versions of Ubuntu, I worked around this problem by going into alsamixer and disabling "Auto-Mute Mode", and then going into the sound settings and choosing "Analog Headphones". However, on 12.04, no such option exists, rendering my headphones unusable with no way to work around the problem. I momentarily thought I had this problem fixed when I installed PulseAudio Volume Control from the Software Centre. I selected the Output Devices tab, and under "Built-in Audio Analogue Stereo" I selected "Headphones" for the port. However, this almost randomly seems to change back to "Speakers", despite me setting "Auto-Mute Mode" as disabled. Basically, I would like a way to permanently mute the speakers so only the headphones will play sound, without it losing my settings. It is ridiculous that such a simple setting has been taken away to "simplify" the user interface.

  Read the article

• Why does Inkscape become unresponsive all of the sudden and how can I stop it from happening?

  - by klenwell

  I've just started using Inkscape in Ubuntu 11.10 and I'm not sure what exactly triggers it, but at some point, the Inkscape viewport becomes unresponsive. The viewport is still visible. I can still manipulate the window itself: move, resize, open menu items at top. The cursor switches style. But clicking on anything within the viewport has no effect. I must close the file and restart in order to regain control.

  Read the article

• Why does my player stop when stepping onto a new tile?

  - by user220631

  Me and my friend are creating a game from scratch. He is in charge of art design and I am in charge of coding. I have done well so far with the code, but I have a collision detection problem when the character moves right: Once the player moves right, whenever a new block is encountered, the player stops. I don't know if this is a problem with collision or the player but I can't work around it. Here is the collision code: this.IsColliding = function(obj) { if(this.X > obj.X + obj.Width) return false; else if(this.X + this.Width < obj.X) return false; else if(this.Y > obj.Y + obj.Height) return false; else if(this.Y + this.Height < obj.Y) return false; else return true; } I also wanted to see if there as a way to make the player collide with the bottom of the block and the right side of the block instead of running through it.

  Read the article

• How can I stop a bot attack on my site?

  - by tnorthcutt

  I have a site (built with wordpress) that is currently under a bot attack (as best I can tell). A file is being requested over and over, and the referrer is (almost every time) turkyoutube.org/player/player.swf. The file being requested is deep within my theme files, and is always followed by "?v=" and a long string (i.e. r.php?v=Wby02FlVyms&title=izlesen.tk_Wby02FlVyms&toke). I've tried setting an .htaccess rule for that referrer, which seems to work, except that now my 404 page is being loaded over and over, which is still using lots of bandwidth. Is there a way to create an .htaccess rule that requires no bandwidth usage on my part? I also tried creating a robots.txt file, but the attack seems to be ignoring that. #This is the relevant part of the .htaccess file: RewriteCond %{HTTP_REFERER} turkyoutube\.org [NC] RewriteRule .* - [F]

  Read the article

• What is a good one-stop-shop for understanding software licensing information?

  - by Macy Abbey

  I've learned a fair amount about the various different software licensing models and what those models mean for my own software project. However, I'd like to make sure I understand as many of them as possible for making decisions on how to license my own software and in what scenarios I can safely use software under a licensing model. Do you have a good recommendation for a book/site etc.. that has this information in one location?

  Read the article

• What are the common pitfalls that would stop Authorised Key SSH access, and how do I find and correct for them?

  - by Ashimema

  EDIT: This question was reworked to make it more useful to the community and less specific to me. Questions seem to come up reasonably often regarding ssh and problems with authorised keys access, but very few seem to have a clear answer anywhere; Server keeps asking for password after I've copied my SSH Public Key to authorized_keys ssh not accepting public key how do I use ssh with key access in 11.10 passwordless ssh not working So, In the communities opinion, what is the tried and tested method for getting to the bottom of such problems?

  Read the article

• How Byte loading/storing is implemented By the CPU?

  - by AlexDan

  I know that in 32bit machine, cpu read from memory 32bits at a time. since the registers in this case is 32bit in size too, I can understand how this works. What I don't understand is how the cpu implement load instructions of 1 byte. does it load the whole word where the single byte is located to the register, then perform some kind of "byte shifting", or does the cpu can load a single byte, in this case when does the byte masking happen, is it until the byte got loaded in the register, or it happen when byte is send through the data bus ? P.S. The cpu Im using is MIPS, the instructions Im talking about are: lb or lbu

  Read the article

• How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

  - by Paul Swartout

  I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

  Read the article

• Do big domain sellers ever stop renewing their domains? [on hold]

  - by nctrnl

  There are many companies out there who register tons of domains that they have no plans to use except for trying to sell them for a ridiculously high price. One domain name in particular was registered in year 2000 and hasn't been in use since then other than as a temporary redirect website for about a month (when checking web.archive.org). It makes me furious that this behaviour has not been outlawed yet. I wonder if it's even worth to wait for a .com domain to expire anymore? Do you have any success stories to share?

  Read the article

• Oracle Technology Network Architect Day &ndash; Next Stop: Big D

  - by Bob Rhubart

  Registration is now open for the Architect Day events in Dallas TX (5/13), Redwood Shores CA (5/18), and  Anaheim CA (5/19). These events are free and offer a full slate of presentations and discussions covering a broad range of topics of interest to architects. The agenda for each location includes guest keynotes by members of the Oracle ACE community, breakout sessions, panel discussions, and  roundtable discussions in which all attendees get a chance share their insight and expertise. All that, and you get a free lunch plus an end of day reception. What’s not to like? Seating for these free events is limited, so if you snooze, you lose. I’ll be at the Dallas event. Hope to see you there.   Technorati Tags: oracle,oracle technology network,software architect,events,conference del.icio.us Tags: oracle,oracle technology network,software architect,events,conference

  Read the article

• How do I stop color changes when quitting vi from a terminal emulator?

  - by Michael Warhol

  I have a problem with colors when using vi under Ubuntu 12.04. I'm connecting to my Ubuntu server from a PC, using PowerTerm terminal emulation software. I have PowerTerm set up to display black text on a grey background. When I connect to the Ubuntu box, the screen is fine. When I open a file with vi, the screen is fine. The text is black on a gray background, which is normal for my PowerTerm setup. However, if the file is less than a full screen long, the remainder of the screen is a black background. When I quit vi, the entire background turns black, and the text becomes white. I have to do a Terminal Reset to restore my normal text and background colors. What I want is for there to be no change at all when I use vi. The text should be black and the background grey. I have another server loaded with RedHat 9, and that acts normally; colors don’t change when using vi. Here is my .vimrc file: set compatible syntax off let g:loaded_matchparen=1 set nocp set noincsearch set nohlsearch set noshowmatch set bg=dark I've tried set bg=dark and set bg=light. It makes no difference. Is there some other set command that would clear this up for me, or some TERM setting (my TERM is set to linux)?

  Read the article

• Unity elements sometimes appear while full screen in Virtualbox - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Unity suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and the Unity element is in the background. But you're busy typing into a Unity box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the "Run Command" entry box has come up and is capturing the keyboard: I would like a foreground full screen app to stay that way. Is there a way that I can keep Unity but only have it activate its elements (e.g. pop out with its search box) if I physically click a button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher or other elements, because doing my actual work is more involved than just launching programs.

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >