Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 94/461 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • solaris + EMC + power-path

    - by yael
    please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

    Read the article

  • Software RAID underneath ESXi datastore

    - by carlpett
    I'm building an virtual environment for a small business. It is based around a single ESXi 5.1 host, which will host half a dozen or so VMs. I'm having some doubts regarding how to implement the storage though. I naturally want the datastore to be fault tolerant, but I can't get the funds for a separate storage machine, nor expensive hardware RAID solutions, so I would like to use some software RAID (lvm/mdadm, most likely). How can this be implemented? My only idea so far would be to create a VM which has the storage adapter as passthrough, puts some software RAID on top of the disks and then presents the resulting volumes "back" to the ESXi host which then creates a datastore from which other VMs get their storage presented. This does seem kind of round-about, do I have any better options? From my research, passthrough seems to come with quite a few drawbacks, such as no suspend/resume etc.

    Read the article

  • FIPS-compliant Isolated Storage in WinXP?

    - by lance
    I've read (but not tested) that Isolated Storage uses Sha1Managed, which is not FIPS-compliant? Is that accurate, and can anything be done to use Isolated Storage on a FIPS-compliant WinXP SP2 box? I've seen mention of "Isolated Storage" within both the ClickOnce and Silverlight spaces. I'd appreciate an informed answer regarding either (or both!).

    Read the article

  • Why is thread local storage so slow?

    - by dsimcha
    I'm working on a custom mark-release style memory allocator for the D programming language that works by allocating from thread-local regions. It seems that the thread local storage bottleneck is causing a huge (~50%) slowdown in allocating memory from these regions compared to an otherwise identical single threaded version of the code, even after designing my code to have only one TLS lookup per allocation/deallocation. This is based on allocating/freeing memory a large number of times in a loop, and I'm trying to figure out if it's an artifact of my benchmarking method. My understanding is that thread local storage should basically just involve accessing something through an extra layer of indirection, similar to accessing a variable via a pointer. Is this incorrect? How much overhead does thread-local storage typically have? Note: Although I mention D, I'm also interested in general answers that aren't specific to D, since D's implementation of thread-local storage will likely improve if it is slower than the best implementations.

    Read the article

  • Ubuntu + Wacom Intuos 4 + MyPaint HELP!

    - by Sativa
    Please keep in mind I'm not that computer savvy, but I will try any suggestion so please help me out! My tablet will stop working if the USB connection is ever broken, or the Ubuntu software is being updated. Sometimes it will stop working for no reason that I can see. The lights will still be on, but it won't be responsive. It doesn't work again until I restart the laptop with the tablet plugged in, which is grating if you have to do it every 25 min. or so... I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! Also, MyPaint is frequently having hiccups. It seems to save fine but at times it will randomly close down and when I open files they're often empty. They turn into 0Kb files and only contain a single empty layer. Also very grating, considering I lose days of work for no clear reason and without any heads up. Again, I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! The error message reads; Traceback (most recent call last): File "/usr/share/mypaint/gui/application.py", line 177, at_application_start(*junk=()) else: self.filehandler.open_file(fn) variables: {'fn': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora'), 'self.filehandler.open_file': ('local', <bound method FileHandler.wrapper of <gui.filehandling.FileHandler object at 0x7fdb89063a10>>)} File "/usr/share/mypaint/gui/drawwindow.py", line 60, wrapper(self=<gui.filehandling.FileHandler object>, *args=(u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',), **kwargs={}) try: func(self, *args, **kwargs) # gtk main loop may be called in here... variables: {'self': ('local', <gui.filehandling.FileHandler object at 0x7fdb89063a10>), 'args': ('local', (u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',)), 'func': ('local', <function open_file at 0x7fdb8b397b90>), 'kwargs': ('local', {})} File "/usr/share/mypaint/gui/filehandling.py", line 231, open_file(self=<gui.filehandling.FileHandler object>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora') try: self.doc.model.load(filename, feedback_cb=self.gtk_main_tick) except document.SaveLoadError, e: variables: {'self.doc.model.load': ('local', <bound method Document.load of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'feedback_cb': (None, []), 'self.gtk_main_tick': ('local', <function gtk_main_tick at 0x7fdb8b397b18>), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 544, load(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', **kwargs={'feedback_cb': <function gtk_main_tick>}) try: load(filename, **kwargs) except gobject.GError, e: variables: {'load': ('local', <bound method Document.load_ora of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'kwargs': ('local', {'feedback_cb': <function gtk_main_tick at 0x7fdb8b397b18>}), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 772, load_ora(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', feedback_cb=<function gtk_main_tick>) tempdir = tempdir.decode(sys.getfilesystemencoding()) z = zipfile.ZipFile(filename) print 'mimetype:', z.read('mimetype').strip() variables: {'zipfile.ZipFile': ('global', <class 'zipfile.ZipFile'>), 'z': (None, []), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/lib/python2.7/zipfile.py", line 770, __init__(self=<zipfile.ZipFile object>, file=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', mode='r', compression=0, allowZip64=False) if key == 'r': self._RealGetContents() elif key == 'w': variables: {'self._RealGetContents': ('local', <bound method ZipFile._RealGetContents of <zipfile.ZipFile object at 0x7fdb9b952790>>)} File "/usr/lib/python2.7/zipfile.py", line 811, _RealGetContents(self=<zipfile.ZipFile object>) if not endrec: raise BadZipfile, "File is not a zip file" if self.debug > 1: variables: {'BadZipfile': ('global', <class 'zipfile.BadZipfile'>)} BadZipfile: File is not a zip file

    Read the article

  • Windows Azure Table Storage LINQ Operators

    - by Ryan Elkins
    Currently Table Storage supports From, Where, Take, and First. Are there plans to support any of the other 29 operators? If we have to code for these ourselves, how much of a performance difference are we looking at to something similar via SQL and SQL Server? Do you see it being somewhat comparable or will it be far far slower if I need to do a Count or Sum or Group By over a gigantic dataset? I like the Azure platform and the idea of cloud based storage. I like Windows Azure for the amount of data it can store and the schema-less nature of table storage. SQL Azure just won't work due to the high cost to storage space.

    Read the article

  • Neue Marketing Kits für Hardware

    - by A&C Redaktion
    Zur Vertriebsunterstützung gibt es jetzt auch Oracle Marketing Kits in Deutsch für folgende Hardware-Lösungen: Server & Storage: Improve Database Capacity Management with Oracle Storage and Hybrid Columnar Compression Server & Storage: Accelerating Database Test & Development with Sun ZFS Storage Appliance Server & Storage: Upgrade SAN Storage to Oracle Pillar Axiom Server & Storage: SPARC Refresh with Oracle Solaris Operating System Server & Storage: SPARC Server Refresh: The Next Level of Datacenter Performance with Oracle’s New SPARC Servers Server & Storage: Oracle Server Virtualization Server & Storage: Oracle Desktop Virtualization

    Read the article

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • New Marketing Assets Available

    - by swalker
    NEW translated demand generation materials available for the following Oracle Marketing Kits, designed to help partners generate sales around Oracle's solutions: Server & Storage: Improve Database Capacity Management with Oracle Storage and Hybrid Columnar Compression Server & Storage: Accelerating Database Test & Development with Sun ZFS Storage Appliance Server & Storage: Upgrade SAN Storage to Oracle Pillar Axiom Server & Storage: SPARC Refresh with Oracle Solaris Operating System Server & Storage: SPARC Server Refresh: The Next Level of Datacenter Performance with Oracle’s New SPARC Servers Server & Storage: Oracle Server Virtualization Server & Storage: Oracle Desktop Virtualization

    Read the article

  • Windows Azure Table Storage Error when in the cloud

    - by Dan Jones
    hey, I downloaded the simple table storage sample on Cloudy in Seattle blog It works perfect when aimed at local storage but when I change to point to azure storage i get the following error Screenshot (on skydrive) http://cid-00341536d0f91b53.skydrive.live.com/self.aspx/.Public/error.png anyone see this before? thanks guys

    Read the article

  • Neue Marketing Kits für Hardware

    - by A&C Redaktion
    Die Oracle Marketing-Kit sind ein beliebtes Instrument zur Vertriebsunterstützung. Stetig erweitert enthalten sie den Textentwurf für Emailing, Landigpad und ein Telemarketing-Script. Jetzt sind brandneue Kits u.a. in Deutsch für folgende Hardware-Lösungen verfügbar: Server & Storage: Improve Database Capacity Management with Oracle Storage and Hybrid Columnar Compression Server & Storage: Accelerating Database Test & Development with Sun ZFS Storage Appliance Server & Storage: Upgrade SAN Storage to Oracle Pillar Axiom Server & Storage: SPARC Refresh with Oracle Solaris Operating System Server & Storage: SPARC Server Refresh: The Next Level of Datacenter Performance with Oracle’s New SPARC Servers Server & Storage: Oracle Server Virtualization Server & Storage: Oracle Desktop Virtualization

    Read the article

  • Create a public folder in internal storage

    - by user2516977
    sorry for my english, but i want to write in this forum because in my opinion is the best. Now my problem: I want to create a folder in Internal storage to share with 2 application. in my app, i download an Apk from my server and i run it. Before I used external storage and everything worked. Now i want to use the internal storage for users that don't have an external storage. I use this: String folderPath = getFilesDir() + "Dir" but when i try to run the apk, doesn't work. and i can't find this folder on my phone. Thank you..

    Read the article

  • External USB HD issues with a twist (works on Windows7 but not XP)

    - by Eruditass
    I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

    Read the article

  • Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

    - by Liam
    I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

    Read the article

  • Failures when copying between two external drives on the same controller

    - by Krzysztof Kosinski
    I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

    Read the article

  • PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

    - by Chris Boyle
    I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

    Read the article

  • How can I disable the automatic switch to "library" mode in Windows 7's Media Player 12?

    - by matthews
    Whenever I plug any USB device into my computer while running Windows Media Player 12 in Windows 7, it will automatically swtich the player from the Now Playing mode to Library mode. This is intended to faciliate syncing between Media Player and MP3 players, but it happens for any USB device. I'd like this to not happen since it's infuriating to see this take place while I'm watching something on a separate screen in Media Player just from plugging in a USB key. This has nothing to do with Windows autorun, and nothing to do with versions of Windows pre-7. And no, switching to some other video player is not an option; I've tried them all, none are as good as stock Media Player in 7.

    Read the article

  • How to Connect Firewire Camcorder to Laptop without firewire port

    - by bdk
    I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

    Read the article

  • Cheapest Embedded System with Wireless Connectivity?

    - by geeko
    Problem: I'm trying to capture some information coming from keyboard, mouse and barcode reader connected to some PC via PS/2, USB and/or RS-232, before information get to PC and send it over the Internet to some central server. I'm thinking to do so by using some kind of hardware interface (middleware, if you like) between PC and input devices. I thought this interface can be embedded PC, PDA or simply some mobile phone with wireless connectivity. PS/2 and RS-232 could be converted to USB using some USB convector/hub that connects to one of these interface systems. Then some special API programming take place to communicate between PC, input devices and wireless server, in the form of application running on the interface system. What's the cheapest solution that can achieve this? Or possibly any other solution?

    Read the article

  • How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

    - by user60813
    Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

    Read the article

  • Ubuntu (11.10) fails to connect to wireless network

    - by Tal Galili
    I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

    Read the article

  • DVD RW: Are they still relevant for backups?

    - by Harry
    Hello, With the availability of compact USB memory sticks with much, MUCH higher storage capacities is there still any use-case for taking periodic, incremental backups on DVD/RWs? The DVD/RW has an additional annoyance that you cannot drag and drop files to it as easily as you can on a USB memory stick. So, if I have a 4.7GB DVD/RW, I must re-burn the whole image every time I backup new stuff... with possibly rearranged file/folder structure. Secondly, why in this day and age you cannot install a file-system (like ext3 or FAT32) on a DVD/RW... and likewise on CD/RW's as you can on a USB memory stick? Many thanks, /HS

    Read the article

  • DVD RW: Are they still relevant for backups?

    - by Harry
    Hello, With the availability of compact USB memory sticks with much, MUCH higher storage capacities is there still any use-case for taking periodic, incremental backups on DVD/RWs? The DVD/RW has an additional annoyance that you cannot drag and drop files to it as easily as you can on a USB memory stick. So, if I have a 4.7GB DVD/RW, I must re-burn the whole image every time I backup new stuff... with possibly rearranged file/folder structure. Secondly, why in this day and age you cannot install a file-system (like ext3 or FAT32) on a DVD/RW... and likewise on CD/RW's as you can on a USB memory stick? Many thanks, /HS

    Read the article

  • Bootmgr is missing for windows xp

    - by user1167074
    I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

    Read the article

  • Installing any linux distro on new netbook hangs midway

    - by Neigyl R. Noval
    I have just bought a new netbook, Lenovo S110 with a starter Window 7, 32 bit Operating system. I wanted to wipe away Windows and go with Debian or Ubuntu. I have successfully made my USB drive bootable with the Debian net install. The problem is, my computer always hangs up at the start of the installation (with the latter shown on screen). Keyboard stopped responding , and USB was probably not reading (since it was not blinking anymore). I know the bootable USB drive with Debian installer is working since installation works on other netbooks. What should I do to install Linux on my netbook?

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >