Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 94/372 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

  - by Wouter

  I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

  Read the article

• Edirol UA-25 driver on Windows 8 Preview

  - by ETFairfax

  I've installed Windows 8 developer preview on a laptop and everything is working apart from my external sound card. The sound card in question is this one, and I've tried downloading and installing the Window 7 drivers from here but no joy so far. As per the instructions I remove the USB cable from the port. I then run setup.exe and (which I have set to run in Windows 7 compatibility mode). It starts doing it's stuff then says "Please insert the USB cable and wait"......that's where things stop! Nothing happens. I don't even here the "ding-dong" of the USB device being recoginised. Obviously I realise that the drivers are for windows 7 and not 8, but was hoping that someone would be able to crowbar it to work!!! Any tips appreciated. Thanks

  Read the article

• graphics cards with no HDMI output

  - by Noam Gal

  I am currently looking at Gainward GTX260 896MB GS GLH, but I've seen it also on the x275 version - the card doesn't have an HDMI output, only two dvi and one tv out (s-video?). They claim they support HDMI using a dvi-HDMI converter. Will I get a true high definition quality on my TV (assuming it supports it) like that? Or is it not as good, and I should stick to cards that have an HDMI output (ATI), or pay way too much for x295? What about connecting the audio? The x260 comes with an internal spdif cable - does that mean I can connect my soundcard to my graphics card, and have the audio come out through the dvi, and into the HDMI cable? Or am I mixing it all up here, and I have to somehow connect the sound to the TV using a seperate cable (Hoping it has a seperate audio-in for the HDMI channel)?

  Read the article

• Mac OS X: network disabled because security breach

  - by fireeyedboy

  Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

  Read the article

• Does HP 8530w support Wifi 802.11n?

  - by FoxyBOA

  According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

  Read the article

• How to get Windows 7 to automatically connect to an ad-hoc network?

  - by George Edison

  I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

  Read the article

• How to automatically disable secondary monitor in Windows 7

  - by Phenom

  My primary monitor is attached to my onboard video card. My secondary monitor is attached to my PCI-E card. When I first start my computer, only the primary monitor is on, and it is the only monitor that is recognized. While I'm in Windows 7, if I turn on my secondary monitor, Windows 7 automatically detects it, and expands my desktop to stretch across both monitors. But if I turn off the secondary monitor, Windows 7 doesn't automatically disable it. Is there a way I can get it to automatically disable when I turn it off, or is there a utility that makes it easier to disable it instead of having to go to screen resolution?

  Read the article

• Streaming video from a point-and-shoot camera that doesn't support it

  - by egasimus

  I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

  Read the article

• X-FI optical output not being recognized.

  - by Luciano

  Hello there! I have an issue and I don't know what to do! I have a SoundBlaster X-FI Xtreme Gamer, which has a spdif mini-optical output. I have it connected to a home theater, via a toslink cable and an adapter to fit in the mini plug. It used to work perfectly, but now it doesn't anymore. There is light travelling through the cable, but the HT doesn't pick up the signal. The sound card of the motherboard also has an optical output (regular, not mini) and it works ok, so the cable and the HT are fine, I think. What else should I try? Thanks, Luciano. PS: I only enabled the onboard card for testing, but usually it's disabled to avoid any kind of conflicts. PPS: I'm using Windows 7 64bit with latest drivers of everything, but like I said. It used to work.

  Read the article

• Virtual Machines: What components should I upgrade to improve running virtual machines?

  - by joshsvoss

  at work I need to have one or sometimes two instances of a vmware virtual Windows 7 machine running on my real Windows 7 machine. The computer I'm using is Dell Precision 490 from 2009 I believe, possibly earlier. Running Windows 7 ultimate. Problems while running VM's: The entire computer slows down when a vmware instance is running. Pages take a while to react to a scroll, applications take forever to launch, and programs hang both in the virtual machines and on the real one. So, what components should I upgrade to improve this? I guess a more pointed question would be, which components will help the most? Possible options: Getting 8gb of RAM instead of 4gb new graphics card new processors? (Is that really an option?) My intuition tells me it will be a combination of the RAM and graphics card. There is also the possibility that an '09 tower just isn't cut out for vm's and our business should purchase a new tower.

  Read the article

• Slow internet using Arch Linux

  - by GZaidman

  after a week or so of using Arch Linux I cant access the internet - it takes around 5 mins to load google (most of the other websites just give me a timeout), pacman's downloading speed range between 5-2Kbs, and pinging google takes around 9Kms. I'm connected using wireless network (wifi card is Intel Ultimate 6300 and router is Edimax 6524n). Every other Windows machine that's connected to the network (and even the T410 running Windows) is fine, so the problem lies in Linux. So far, i checked the resolv.conf file (my router ip address is listed), and the hosts file (pretty much default), and I disabled the ipv6 module. None of that helped. PS: i'm using NetworkManager (but the problem still occurs when connecting using wicd) running on Gnome3. Thanks in advance for any help you can provide! EDIT: something really strange happens whenever I ping google: i get an unknown host 'google.com', but the bit rate from the card jumps at the exact second I ping google (so far, the bit rate jumped to 54Mb/s from 1Mb/s over the course of 4 pings).

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• Can't Use Switchable Graphics

  - by Rev

  I can't get my switchable graphics cards working on my Acer 4820TG laptop. It came installed with Windows 7, but I've installed the RTM build of Windows 8. I have to keep the "Graphics" setting on the BIOS set to "Discrete," if it's set to "Switchable" the screen turns black after the boot animation is complete. The machine has an Intel graphics card and an AMD Mobility Radeon HD 5650, and I know that the Intel card is working. I've seen it work a couple of times with Windows 8 installed, but for some reason it just doesn't anymore. I know that it's not broken, because when I plug in a secondary monitor, and move the cursor to the right, I can see it on that monitor. Are there drivers or something I need to install? I've tried a number of drivers and utilities from Acer's website, none of which have fixed the problem.

  Read the article

• Intermittent connection issues with atheros ar9285

  - by MrStatic

  I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

  Read the article

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Configuring Wireless on Cisco 851W

  - by Aequitarum Custos

  Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• Internet connection slower than network connection speed

  - by Mike Pateras

  I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

  Read the article

• Windows XP unknown location popup annoyance

  - by mcgyver5

  I'm plagued by a popup from Windows XP when I use wireless. It says, "You are in an Unknown Location..." It always pops above whatever window I'm using, but does not take focus, so while it does not interrupt my typing, it gets in the way and I can't dismiss it with a keystroke. I'd like to find a way to disable this popup. I've searched in control panel -- Network Connections. I'm not referring to "balloon tips" that appear related to the wireless connection in a new location.

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Why would you use EAP-TTLS instead of PEAP?

  - by Ivan Macek

  As I understood EAP-TTLS and PEAP share same level of security when implemented in wireless networks. Both only provide server side authentication via certificate. The drawback of EAP-TTLS can be non native support in Microsoft Windows so every user has to install additional software. The benefit of EAP-TTLS can be support for less secure authentication mechanisms (PAP, CHAP, MS-CHAP) but why would you need them in modern and properly secure wireless system? What are you opinions? Why should I implement EAP-TTLS instead of PEAP? Let's say that I have most Windows users, medium Linux users and least iOS, OSX users.

  Read the article

• Step by step USB Wi-Fi driver install for mint 15

  - by Andy

  I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

  Read the article

• Can you recomend good software for scanning business cards?

  - by Marcin K

  I want it to store business card as an image and to make it searchable (OCR).

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >