batch - Page 95 - Developer IT

Static IPv6 address in Windows unused for outgoing connections

- by Luc

I'm running a Windows server and trying to get it to use a static IPv6 address for outgoing connections to other IPv6 hosts (such as Gmail). I need this because Gmail requires a ptr record, and I can't set one for random addresses. The static address is configured on the host, but it also has a temporary privacy address as well as a random address from the router it seems. By default Windows uses the privacy address; it seems this is the expected behavior (and it makes perfect sense for people/users that did not set a static address, but I did!). I've tried disabling the privacy address with: netsh int ipv6 set privacy disabled This indeed gets rid of the privacy address, but I still have the random address that the router assigned. To disable this, it was said I needed to disable "router discovery" using this command: net interface ipv6 set interface 14 routerdiscovery=disabled Upon doing this, all IPv6 connectivity is lost. If I do this while pinging Gmail, it will report "Destination host unreachable" as soon as I enter the command. In the static IPv6 configuration, I did configure the default gateway and prefix length, so I don't see why it's unable to connect. Probably has something to do with the lack of ARP in IPv6 and somehow being unable to resolve the router's MAC, but I wouldn't know how to fix this. Finally I've tried disabling the DHCPv6 lease with these commands: netsh interface ipv6 set interface "IDMZ Team" managedaddress=disabled netsh interface ipv6 set interface "IDMZ Team" otherstateful=disabled Which was to no avail; the host continues to obtain and use the router-assigned IPv6 address. The router is a FritzBox 7340, which shows me all the IPv4 and IPv6 addresses that the host (identified by MAC) utilizes, but I'm unable to change the assigned address. Maybe this could be done over the telnet interface of the router somehow, but again, I wouldn't know how to do this even if it's the way to go. In short, any of the following would probably solve my problem: Change Windows' source address selection behavior. Have Windows not get an address from the router and not generate a privacy address; Have the router hand out a static address and make Windows use that as source address. Recover connectivity after disabling router discovery on Windows. Alternatively I might use some (batch, perl, ...) script to throw away all IPv6 addresses except the desired one, but this feels rather hacky. If it's the only way (or less hacky than another hacky solution), it might be an option though. Thanks!

Read the article

Detecting upload success/failure in a scripted command-line SFTP session?

- by Will Martin

I am writing a BASH shell script to upload all the files in a directory to a remote server and then delete them. It'll run every few hours via a CRON job. My complete script is below. The basic problem is that the part that's supposed to figure out whether the file uploaded successfully or not doesn't work. The SFTP command's exit status is always "0" regardless of whether the upload actually succeeded or not. How can I figure out whether a file uploaded correctly or not so that I can know whether to delete it or let it be? #!/bin/bash # First, save the folder path containing the files. FILES=/home/bob/theses/* # Initialize a blank variable to hold messages. MESSAGES="" ERRORS="" # These are for notifications of file totals. COUNT=0 ERRORCOUNT=0 # Loop through the files. for f in $FILES do # Get the base filename BASE=`basename $f` # Build the SFTP command. Note space in folder name. CMD='cd "Destination Folder"\n' CMD="${CMD}put ${f}\nquit\n" # Execute it. echo -e $CMD | sftp -oIdentityFile /home/bob/.ssh/id_rsa [email protected] # On success, make a note, then delete the local copy of the file. if [ $? == "0" ]; then MESSAGES="${MESSAGES}\tNew file: ${BASE}\n" (( COUNT=$COUNT+1 )) # Next line commented out for ease of testing #rm $f fi # On failure, add an error message. if [ $? != "0" ]; then ERRORS="${ERRORS}\tFailed to upload file ${BASE}\n" (( ERRORCOUNT=$ERRORCOUNT+1 )) fi done SUBJECT="New Theses" BODY="There were ${COUNT} files and ${ERRORCOUNT} errors in the latest batch.\n\n" if [ "$MESSAGES" != "" ]; then BODY="${BODY}New files:\n\n${MESSAGES}\n\n" fi if [ "$ERRORS" != "" ]; then BODY="${BODY}Problem files:\n\n${ERRORS}" fi # Send a notification. echo -e $BODY | mail -s $SUBJECT [email protected] Due to some operational considerations that make my head hurt, I cannot use SCP. The remote server is using WinSSHD on windows, and does not have EXEC privileges, so any SCP commands fail with the message "Exec request failed on channel 0". The uploading therefore has to be done via the interactive SFTP command.

Read the article

svchost.exe crash on wake up

- by Serge

Lately whenever I wake up my laptop from sleep I get a series of errors (generated by a host process failing) I haven't been able to figure out why this happens but I know which host process fails and was wondering if someone had some insight on why this keeps occuring 99% of the time when my laptop wakes up. here's the host process error Faulting application svchost.exe_SysMain, version 6.0.6001.18000, time stamp 0x47919291, faulting module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e0421d, exception code 0xc0000006, fault offset 0x000000000005a02d, process id 0x1738, application start time 0x01cae656279b1010. and here are some services that fail because of that host The Windows Audio Endpoint Builder service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service. The Wired AutoConfig service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 0 milliseconds: Restart the service. The ReadyBoost service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service. The Human Interface Device Access service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service. The Network Connections service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 100 milliseconds: Restart the service. The Program Compatibility Assistant Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service. The Superfetch service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service. Anyways I think you get the point, there are a few more. It got really annoying to wait for those services to restart so I created a batch file that does it automatically whenever the wlan stops I'm using Vista x64 on a Studio XPS 1640

Read the article

How to bind old user's SID to new user to remain NTFS file ownership and permissions after freshly reinstall of Windows?

- by LiuYan ??

Each time we reinstalled Windows, it will create a new SID for user even the username is as same as before. // example (not real SID format, just show the problem) user SID -------------------- liuyan S-old-501 // old SID before reinstall liuyan S-new-501 // new SID after reinstall The annoying problem after reinstall is NTFS file owership and permissions on hard drive disk are still associated with old user's SID. I want to keep the ownership and permission setting of NTFS files, then want to let the new user take the old user's SID, so that I can access files as before without permission problem. The cacls command line tool can't be used in such situation, because the file does belongs to new user, so it will failed with Access is denied error. and it can't change ownership. Even if I can change the owership via SubInACL tool, cacls can't remove the old user's permission because the old user does not exist on new installation, and can't copy the old user's permission to new user. So, can we simply bind old user's SID to new user on the freshly installed Windows ? Sample test batch @echo off REM Additional tools used in this script REM PsGetSid http://technet.microsoft.com/en-us/sysinternals/bb897417 REM SubInACL http://www.microsoft.com/en-us/download/details.aspx?id=23510 REM REM make sure these tools are added into PATH set account=MyUserAccount set password=long-password set dir=test set file=test.txt echo Creating user [%account%] with password [%password%]... pause net user %account% %password% /add psgetsid %account% echo Done ! echo Making directory [%dir%] ... pause mkdir %dir% dir %dir%* /q echo Done ! echo Changing permissions of directory [%dir%]: only [%account%] and [%UserDomain%\%UserName%] has full access permission... pause cacls %dir% /G %account%:F cacls %dir% /E /G %UserDomain%\%UserName%:F dir %dir%* /q cacls %dir% echo Done ! echo Changing ownership of directory [%dir%] to [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q echo Done ! echo RunAs [%account%] user to write a file [%file%] in directory [%dir%]... pause runas /noprofile /env /user:%account% "cmd /k echo some text %DATE% %TIME% > %dir%\%file%" dir %dir% /q echo Done ! echo Deleting and Recreating user [%account%] (reinstall simulation) ... pause net user %account% /delete net user %account% %password% /add psgetsid %account% echo Done ! %account% is recreated, it has a new SID now echo Now, use this "same" account [%account%] to access [%dir%], it will failed with "Access is denied" pause runas /noprofile /env /user:%account% "cmd /k cacls %dir%" REM runas /noprofile /env /user:%account% "cmd /k type %dir%\%file%" echo Done ! echo Changing ownership of directory [%dir%] to NEW [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q cacls %dir% echo Done ! As you can see, "Account Domain not found" is actually the OLD [%account%] user echo Deleting user [%account%] ... pause net user %account% /delete echo Done ! echo Deleting directory [%dir%]... pause rmdir %dir% /s /q echo Done !

Read the article

Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

- by Jay Michaud

I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

Read the article

flashcache with mdadm and LVM

- by Backtogeek

I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

Read the article

Random Computer Crashes

- by Josh W.

Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

Read the article

How do I (robustly) remotely execute tasks on Windows workstations in a domain?

- by Zac B

I'm not even sure if "robustly" is a word. Anyway. Context: We have a few hundred Windows 7 workstations on a LAN. We use AD/GPO management pretty heavily, but there are a lot of periodic and/or manual maintenance tasks we need to do that can't be done via GPO/scheduled task. For example, say I want to execute program X (which runs silently, in the background, and doesn't bother the user) on workstation Y, or say I want to execute task A on a workstation group B either on a schedule or on demand. Kicking the users off of their computers to do this (i.e. using RDP) is a no-no, and doesn't work on groups anyway. Question: What's the best way to do this that is robust enough that, after setup, I could give it to beginner support people (read: people who are phobic of the command line, and get confused with GUI interfaces more complicated than Firefox)? I'm a competent programmer, and, if there is a robust set of tools or framework out there for this type of task, I'd consider hacking something together myself if it didn't take too long. If there's some combination of tools or techniques that others use to make remote-workstation-administration doable by beginners, I have yet to find it. For those who care about the "why": I'm midlevel IT, and was told to implement a remote management solution that allows arbitrary/scheduled remote execution, with confirmation that programs actually ran remotely, and the ability to view what they returned. "Why?" I asked, "Can't I just use PsExec and the task scheduler on a dispatcher machine?" "No," I was told, "'Joe' the second-week tech is going to be in charge of this one, and he needs something simple with a GUI." What I've tried: I've played with making a bunch of one-clickable "transfer files to remote computer and run them with PsExec" batch/VB scrips, but those tend to break down and don't easily support running on customizable groups. I've played a little bit with the Windows version of Puppet, but it doesn't support arbitrary-time remote execution (it's ability to group computers into a tree/node structure is really nice though). I've used an older version of Altiris, and, while it does a lot of what I want, it's interface is awful, it's slow, crashes a lot, and is probably too expensive for management. SwiftWater's DMS solution does some of what I want, but it's very underdeveloped, closed-source (not a deal breaker but not ideal), and I get the impression that support and reliability are lacking.

Read the article

FTP script needs blank line

- by Ones and Zeroes

I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

Read the article

Sharepoint Error: [COMException (0x80004005): Cannot complete this action.

- by ifunky

Hi, I've created a site basic definition that uses different master and default pages. Everything works quite well except for whenever I create a new site based on the definition I receive the following error when browsing to the new site: [COMException (0x80004005): Cannot complete this action. Please try again.] Please try again.] Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +0 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +219 [SPException: Cannot complete this action. Please try again.] I'm able to work around this by checking out the new master page and checking it back in again and after doing so there are no further issues at all. Any ideas to what could cause this? Thanks Dan ONET.XML module section: <Modules> <Module Name="CustomMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> <File Url="Shoes.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" /> </Module> <Module Name="Default" List="116" Url=""> <File Url="default.aspx" Name="default.aspx" NavBarHome="True" IgnoreIfAlreadyExists="FALSE"> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="1"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.FooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Description" type="string">FooterLinks Description</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="0"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.SubFooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Description" type="string">Shoes home page links (under the hero image)</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <NavBarPage Name="$Resources:core,nav_Home;" ID="1002" Position="Start" /> <NavBarPage Name="$Resources:core,nav_Home;" ID="0" Position="Start" /> </File> </Module> </Modules> LOG OUTPUT: 05/21/2010 12:22:55.11 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72nz Medium Videntityinfo::isFreshToken reported failure. 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:55.26 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yf Medium Creating list "Master Page Gallery" in web "http://mmm-dev-ll/sites/Shoes/test" at URL "_catalogs/masterpage", (setuppath: "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\global\lists\mplib") 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88y1 Medium No document templates uploaded for list "Master Page Gallery" -- none found for list template "100". 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72kc Medium Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\xml\onet.xml", falling back to global site definition. 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:56.89 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h7 Medium Applying template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:57.09 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yy Medium Activating web-scoped features for template "SubSite#1" at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.12 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1c Medium Preparing 20 features for activation 05/21/2010 12:22:57.14 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium Feature Activation: Batch Activating Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfe... 05/21/2010 12:22:57.14* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium ...a71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium Feature Activation: Batch Activated Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfea... 05/21/2010 12:22:57.15* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium ...71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 88jb Medium Feature Activation: Activating Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75fb Medium Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9'). 05/21/2010 12:22:57.20 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75f8 Medium Feature Activation: Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') was activated at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:57.56 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72ix Medium Not enough information to determine a list for module "Default". Assuming no list for this module. 05/21/2010 12:22:57.87 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h8 Medium Successfully applied template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:59.48 w3wp.exe (0x1E40) 0x0980 Windows SharePoint Services General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80070057 05/21/2010 12:23:07.06 OWSTIMER.EXE (0x0884) 0x106C Office Server Setup and Upgrade 8u3j High Registry key value {SearchThrottled} was not found under registry hive {Software\Microsoft\Office Server\12.0}. Assuming search sku is not throttled. 05/21/2010 12:23:07.08 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 90gf Medium SQL: dbo.proc_MSS_PropagationGetQueryServers 05/21/2010 12:23:07.09 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wni High Resuming default catalog with reason 'GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.11 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wnj High Resuming anchor text catalog with reason GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.14 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8dvl Medium Search application '3c6751cc-37b0-470a-bfa2-bfd0b5635fe1': Provision start addresses in default content source. 05/21/2010 12:23:07.15 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 7hmh High exception in SearchUpgradeProvisioner Keyword Config System.InvalidOperationException: jobServerSearchServiceInstance is null at Microsoft.Office.Server.Search.Administration.SearchUpgradeProvisioner..ctor(SearchServiceInstance searchServiceInstance) at Microsoft.Office.Server.Search.Administration.OSSPrimaryGathererProject.ProvisionContentSources() 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bv High Initiating BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bx High Completed BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:45.84 OWSTIMER.EXE (0x0884) 0x08A8 SharePoint Portal Server SSO 8inc Medium In SSOService::Synch(), sso database conn string: 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqi Medium ExcelServerSharedWebApplication.Synchronize: Starting synchronize for instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqj Medium ExcelServerSharedWebApplication.Synchronize: Successfully synchronized instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:52.31 w3wp.exe (0x1E40) 0x0980 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/1963195510/Root-1-129188762904047141)

Read the article

Simple Self Join Query Bad Performance

- by user1514042

Could anyone advice on how do I improve the performance of the following query. Note, the problem seems to be caused by where clause. Data (table contains a huge set of rows - 500K+, the set of parameters it's called with assums the return of 2-5K records per query, which takes 8-10 minutes currently): USE [SomeDb] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Data]( [x] [money] NOT NULL, [y] [money] NOT NULL, CONSTRAINT [PK_Data] PRIMARY KEY CLUSTERED ( [x] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO The Query select top 10000 s.x as sx, e.x as ex, s.y as sy, e.y as ey, e.y - s.y as y_delta, e.x - s.x as x_delta from Data s inner join Data e on e.x > s.x and e.x - s.x between xFrom and xTo --where e.y - s.y > @yDelta -- when uncommented causes a huge delay Update 1 - Execution Plan <?xml version="1.0" encoding="utf-16"?> <ShowPlanXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.2" Build="11.0.2100.60" xmlns="http://schemas.microsoft.com/sqlserver/2004/07/showplan"> <BatchSequence> <Batch> <Statements> <StmtSimple StatementCompId="1" StatementEstRows="100" StatementId="1" StatementOptmLevel="FULL" StatementOptmEarlyAbortReason="GoodEnoughPlanFound" StatementSubTreeCost="0.0263655" StatementText="select top 100
s.x as sx,
e.x as ex,
s.y as sy,
e.y as ey,
e.y - s.y as y_delta,
e.x - s.x as x_delta
from Data s 
 inner join Data e
 on e.x > s.x and e.x - s.x between 100 and 105
where e.y - s.y > 0.01
" StatementType="SELECT" QueryHash="0xAAAC02AC2D78CB56" QueryPlanHash="0x747994153CB2D637" RetrievedFromCache="true"> <StatementSetOptions ANSI_NULLS="true" ANSI_PADDING="true" ANSI_WARNINGS="true" ARITHABORT="true" CONCAT_NULL_YIELDS_NULL="true" NUMERIC_ROUNDABORT="false" QUOTED_IDENTIFIER="true" /> <QueryPlan DegreeOfParallelism="0" NonParallelPlanReason="NoParallelPlansInDesktopOrExpressEdition" CachedPlanSize="24" CompileTime="13" CompileCPU="13" CompileMemory="424"> <MemoryGrantInfo SerialRequiredMemory="0" SerialDesiredMemory="0" /> <OptimizerHardwareDependentProperties EstimatedAvailableMemoryGrant="52199" EstimatedPagesCached="14561" EstimatedAvailableDegreeOfParallelism="4" /> <RelOp AvgRowSize="55" EstimateCPU="1E-05" EstimateIO="0" EstimateRebinds="0" EstimateRewinds="0" EstimatedExecutionMode="Row" EstimateRows="100" LogicalOp="Compute Scalar" NodeId="0" Parallel="false" PhysicalOp="Compute Scalar" EstimatedTotalSubtreeCost="0.0263655"> <OutputList> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> <ColumnReference Column="Expr1004" /> <ColumnReference Column="Expr1005" /> </OutputList> <ComputeScalar> <DefinedValues> <DefinedValue> <ColumnReference Column="Expr1004" /> <ScalarOperator ScalarString="[SomeDb].[dbo].[Data].[y] as [e].[y]-[SomeDb].[dbo].[Data].[y] as [s].[y]"> <Arithmetic Operation="SUB"> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </Identifier> </ScalarOperator> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> </Identifier> </ScalarOperator> </Arithmetic> </ScalarOperator> </DefinedValue> <DefinedValue> <ColumnReference Column="Expr1005" /> <ScalarOperator ScalarString="[SomeDb].[dbo].[Data].[x] as [e].[x]-[SomeDb].[dbo].[Data].[x] as [s].[x]"> <Arithmetic Operation="SUB"> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> </Identifier> </ScalarOperator> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> </Identifier> </ScalarOperator> </Arithmetic> </ScalarOperator> </DefinedValue> </DefinedValues> <RelOp AvgRowSize="39" EstimateCPU="1E-05" EstimateIO="0" EstimateRebinds="0" EstimateRewinds="0" EstimatedExecutionMode="Row" EstimateRows="100" LogicalOp="Top" NodeId="1" Parallel="false" PhysicalOp="Top" EstimatedTotalSubtreeCost="0.0263555"> <OutputList> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </OutputList> <RunTimeInformation> <RunTimeCountersPerThread Thread="0" ActualRows="100" ActualEndOfScans="1" ActualExecutions="1" /> </RunTimeInformation> <Top RowCount="false" IsPercent="false" WithTies="false"> <TopExpression> <ScalarOperator ScalarString="(100)"> <Const ConstValue="(100)" /> </ScalarOperator> </TopExpression> <RelOp AvgRowSize="39" EstimateCPU="151828" EstimateIO="0" EstimateRebinds="0" EstimateRewinds="0" EstimatedExecutionMode="Row" EstimateRows="100" LogicalOp="Inner Join" NodeId="2" Parallel="false" PhysicalOp="Nested Loops" EstimatedTotalSubtreeCost="0.0263455"> <OutputList> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </OutputList> <RunTimeInformation> <RunTimeCountersPerThread Thread="0" ActualRows="100" ActualEndOfScans="0" ActualExecutions="1" /> </RunTimeInformation> <NestedLoops Optimized="false"> <OuterReferences> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </OuterReferences> <RelOp AvgRowSize="23" EstimateCPU="1.80448" EstimateIO="3.76461" EstimateRebinds="0" EstimateRewinds="0" EstimatedExecutionMode="Row" EstimateRows="1" LogicalOp="Clustered Index Scan" NodeId="3" Parallel="false" PhysicalOp="Clustered Index Scan" EstimatedTotalSubtreeCost="0.0032831" TableCardinality="1640290"> <OutputList> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </OutputList> <RunTimeInformation> <RunTimeCountersPerThread Thread="0" ActualRows="15225" ActualEndOfScans="0" ActualExecutions="1" /> </RunTimeInformation> <IndexScan Ordered="false" ForcedIndex="false" ForceScan="false" NoExpandHint="false"> <DefinedValues> <DefinedValue> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> </DefinedValue> <DefinedValue> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </DefinedValue> </DefinedValues> <Object Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Index="[PK_Data]" Alias="[e]" IndexKind="Clustered" /> </IndexScan> </RelOp> <RelOp AvgRowSize="23" EstimateCPU="0.902317" EstimateIO="1.88387" EstimateRebinds="1" EstimateRewinds="0" EstimatedExecutionMode="Row" EstimateRows="100" LogicalOp="Clustered Index Seek" NodeId="4" Parallel="false" PhysicalOp="Clustered Index Seek" EstimatedTotalSubtreeCost="0.0263655" TableCardinality="1640290"> <OutputList> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> </OutputList> <RunTimeInformation> <RunTimeCountersPerThread Thread="0" ActualRows="100" ActualEndOfScans="15224" ActualExecutions="15225" /> </RunTimeInformation> <IndexScan Ordered="true" ScanDirection="FORWARD" ForcedIndex="false" ForceSeek="false" ForceScan="false" NoExpandHint="false" Storage="RowStore"> <DefinedValues> <DefinedValue> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> </DefinedValue> <DefinedValue> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> </DefinedValue> </DefinedValues> <Object Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Index="[PK_Data]" Alias="[s]" IndexKind="Clustered" /> <SeekPredicates> <SeekPredicateNew> <SeekKeys> <EndRange ScanType="LT"> <RangeColumns> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> </RangeColumns> <RangeExpressions> <ScalarOperator ScalarString="[SomeDb].[dbo].[Data].[x] as [e].[x]"> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> </Identifier> </ScalarOperator> </RangeExpressions> </EndRange> </SeekKeys> </SeekPredicateNew> </SeekPredicates> <Predicate> <ScalarOperator ScalarString="([SomeDb].[dbo].[Data].[x] as [e].[x]-[SomeDb].[dbo].[Data].[x] as [s].[x])>=($100.0000) AND ([SomeDb].[dbo].[Data].[x] as [e].[x]-[SomeDb].[dbo].[Data].[x] as [s].[x])<=($105.0000) AND ([SomeDb].[dbo].[Data].[y] as [e].[y]-[SomeDb].[dbo].[Data].[y] as [s].[y])>(0.01)"> <Logical Operation="AND"> <ScalarOperator> <Compare CompareOp="GE"> <ScalarOperator> <Arithmetic Operation="SUB"> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> </Identifier> </ScalarOperator> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> </Identifier> </ScalarOperator> </Arithmetic> </ScalarOperator> <ScalarOperator> <Const ConstValue="($100.0000)" /> </ScalarOperator> </Compare> </ScalarOperator> <ScalarOperator> <Compare CompareOp="LE"> <ScalarOperator> <Arithmetic Operation="SUB"> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="x" /> </Identifier> </ScalarOperator> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="x" /> </Identifier> </ScalarOperator> </Arithmetic> </ScalarOperator> <ScalarOperator> <Const ConstValue="($105.0000)" /> </ScalarOperator> </Compare> </ScalarOperator> <ScalarOperator> <Compare CompareOp="GT"> <ScalarOperator> <Arithmetic Operation="SUB"> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[e]" Column="y" /> </Identifier> </ScalarOperator> <ScalarOperator> <Identifier> <ColumnReference Database="[SomeDb]" Schema="[dbo]" Table="[Data]" Alias="[s]" Column="y" /> </Identifier> </ScalarOperator> </Arithmetic> </ScalarOperator> <ScalarOperator> <Const ConstValue="(0.01)" /> </ScalarOperator> </Compare> </ScalarOperator> </Logical> </ScalarOperator> </Predicate> </IndexScan> </RelOp> </NestedLoops> </RelOp> </Top> </RelOp> </ComputeScalar> </RelOp> </QueryPlan> </StmtSimple> </Statements> </Batch> </BatchSequence> </ShowPlanXML>

Read the article

Secure wipe of a hard drive using WinPE.

- by Derek Meier

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial. There are tons of applications out there that will do it for you. Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable. Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)? Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence. But, we’re dealing with tinfoil hat wearing types here people. DOD standards dictate at least 3 passes, and typically 7 is the preferred amount. I’m not going to argue about data recovery. I have been told to use 7 passes, and so I will. So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data. I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD. Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc. However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date. I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you. I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!! My wife loves talking about WinPE almost as much as talking about Doctor Who. Wait, did I say loves? Hmmmm, I may have meant loathes. The topic at hand? Right. Wiping a drive! I must have drunk too much coffee this morning. I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat: @echo off echo. echo I will completely wipe the local hard drives using echo 7 individual wipes. The data will NOT echo be recoverable. I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment. The clean command will overwrite the master boot record and any hidden sector information – so be careful! sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001 With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible! I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

Read the article

Compress Large Video Files with DivX / Xvid and AutoGK

- by DigitalGeekery

Have you ever recorded home video on a camcorder only to find the video size is enormous? What if you wanted to share a video clip on YouTube or another video sharing site, but the file size was bigger than the maximum upload size? Today we’ll look at a way to compress certain video files, such as MPEG and AVI, with Auto Gordian Knot (AutoGK). AutoGK is a free application that runs on Windows. It supports Mpeg1, Mpeg2, Transport Streams, Vobs, and virtually any codec used for an .AVI file. AutoGK will accept as input the following file types: MPG, MPEG, VOB, VRO, M2V, DAT, IFO, TS, TP, TRP, M2T, and AVI. Files are output as .AVI files and are converted using the DivX or XviD codecs. Installing and Using AutoGK Download and install AutoGK (link below) Open the AutoGK. You’ll need to navigate a few wizard screens, but you can just accept the defaults. Choose your video file by clicking on the folder to the right of the Input file text box. Browse for and select your video file and click “Open.” For this example, we’ll be working with an .AVI file that’s 167MB in size. The output file is copied into the same directory as the input file by default, but you can change this if you choose. If the input file is also .AVI, AutoGK will append an _agk to the output file so that the original is not overwritten. Next, you’ll see any audio tracks listed. You can unselect the check box if you’d like to remove the audio track. You can choose one of the Predefined size options… Or, select a Custom size in MB or Target Quality in percentage. For our example, we’ll be compressing our 167MB file to 35MB. Click on Advanced Settings. Here you can choose your codec, if you have a preference, as well as output resolution and output audio. If you’d like to use the DivX codec, you’ll need to download and install it separately. (See link below) Typically you’ll want to keep the defaults. Click “OK.” Now you’re ready to add your file conversion job to the Job queue. Click Add Job to add it to the queue. You can add multiple files conversions to the job queue and convert them in one batch. Click Start to begin the conversion process. The process will begin. You’ll be able to see the progress in the Log window on the bottom left. When the conversion is complete you’ll see a “Job finished” and the total time in the log window. Check your output file to see it’s compressed size. Test your video just to make sure the output quality is satisfactory. Note: Conversion times can vary greatly depending on the size of the file and your computer hardware. Files that are several GBs in size may take several hours to compress. AutoGK is no longer being actively developed but is still a wonderful DivX/XviD conversion tool. It can also be used to compress and convert non-copy protected DVDs. Downloads AutoGordianKnot DivX (optional) Similar Articles Productive Geek Tips Use Your Mac Mini as a Media Server Part 2Make Disk Cleanup Compress Older(or Newer) Files on XPMysticgeek Blog: Exclusive Look Inside Vreel – Including Interview With Vreel Founder!Friday Fun: Watch HD Video Content with MeevidConvert a DVD Movie Directly to AVI with FairUse Wizard 2.9 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

Read the article

Lessons from a SAN Failure

- by Bill Graziano

At 1:10AM Sunday morning the main SAN at one of my clients suffered a “partial” failure. Partial means that the SAN was still online and functioning but the LUNs attached to our two main SQL Servers “failed”. Failed means that SQL Server wouldn’t start and the MDF and LDF files mostly showed a zero file size. But they were online and responding and most other LUNs were available. I’m not sure how SANs know to fail at 1AM on a Saturday night but they seem to. From a personal standpoint this worked out poorly: I was out with friends and after more than a few drinks. From a work standpoint this was about the best time to fail you could imagine. Everything was running well before Monday morning. But it was a long, long Sunday. I started tipsy, got tired and ended up hung over later in the day. Note to self: Try not to go out drinking right before the SAN fails. This caught us at an interesting time. We’re in the process of migrating to an entirely new set of servers so some things were partially moved. This made it difficult to follow our procedures as cleanly as we’d like. The benefit was that we had much better documentation of everything on the server. I would encourage everyone to really think through the process of implementing your DR plan and document as much as possible. Following a checklist is much easier than trying to remember at night under pressure in a hurry after a few drinks. I had a series of estimates on how long things would take. They were accurate for any single server failure. They weren’t accurate for a SAN failure that took two servers down. This wasn’t bad but we should have communicated better. Don’t forget how many things are outside the database. Logins, linked servers, DTS packages (yikes!), jobs, service broker, DTC (especially DTC), database triggers and any objects in the master database are all things you need backed up. We’d done a decent job on this and didn’t find significant problems here. That said this still took a lot of time. There were many annoyances as a result of this. Small settings like a login’s default database had a big impact on whether an application could run. This is probably the single biggest area of concern when looking to recreate a server. I’d encourage everyone to go through every single node of SSMS and look for user created objects or settings outside the database. Script out your logins with the proper SID and already encrypted passwords and keep it updated. This makes life so much easier. I used an approach based on KB246133 that worked well. I’ll get my scripts posted over the next few days. The disaster can cause your DR process to fail in unexpected ways. We have a job that scripts out all logins and role memberships and writes it to a file. This runs on the DR server and pulls from the production server. Upon opening the file I found that the contents were a “server not found” error. Fortunately we had other copies and didn’t need to try and restore the master database. This now runs on the production server and pushes the script to the DR site. Soon we’ll get it pushed to our version control software. One of the biggest challenges is keeping your DR resources up to date. Any server change (new linked server, new SQL Server Agent job, etc.) means that your DR plan (and scripts) is out of date. It helps to automate the generation of these resources if possible. Take time now to test your database restore process. We test ours quarterly. If you have a large database I’d also encourage you to invest in a compressed backup solution. Restoring backups was the single larger consumer of time during our recovery. And yes, there’s a database mirroring solution planned in our new architecture. I didn’t have much involvement in things outside SQL Server but this caused many, many things to change in our environment. Many applications today aren’t just executables or web sites. They are a combination of those plus network infrastructure, reports, network ports, IP addresses, DTS and SSIS packages, batch systems and many other things. These all needed a little bit of attention to make sure they were functioning properly. Profiler turned out to be a handy tool. I started a trace for failed logins and kept that running. That let me fix a number of problems before people were able to report them. I also ran traces to capture exceptions. This helped identify problems with linked servers. Overall the thing that gave me the most problem was linked servers. In order for a linked server to function properly you need to be pointed to the right server, have the proper login information, have the network routes available and have MSDTC configured properly. We have a lot of linked servers and this created many failure points. Some of the older linked servers used IP addresses and not DNS names. This meant we had to go in and touch all those linked servers when the servers moved.

Read the article

Edit ePub eBooks with Your Favorite HTML Editor

- by Matthew Guay

ePub eBooks are increasingly popular today, but often they’ve been made by converting other file formats. Here’s how you can edit ePub books to remove irregularities and make them better for reading on your devices. ePub’s are actually a zip file containing images, XHTML files with your text, and more with the .epub extension. You can make them better by editing the XHTML files directly. Code gurus can edit the code directly, but even if you’ve never edited HTML, you can still quickly make changes with a WYSIWYG editor. Extract the Files from your ePub eBook As mentioned before, ePub files are actually renamed zip files. So first let’s get all of the files in your ePub eBook accessible. Find an eBook you want to edit and then change the file extension to .zip. If you don’t see the file extensions, click Organize in the menu bar and select Folder and search options. Select the View tab, and then uncheck the box beside Hide extensions for known file types. Click Ok, and then change the file type as above. Windows will warn you about changing the file type; click Yes to proceed. Now you can browse the files of the ePub file. Notice that it contains mostly HTML or XHTML files and images. Click Extract all files to save them all in a folder so you can easily edit them. Alternately, you can open the ePub file directly in your favorite file archival program such as 7-zip. Browse to the location of your ePub file, double-click it, and it’ll automatically open even if you don’t change the file extension to zip. Now you can extract the folder, or extract individual files as before. Edit Your eBook in KompoZer The actual ebook contents are stored in HTML or XHTML files. These may be stored on the top folder of you ePub file’s directory, or they may be stored in \OEBPS\text in the file. To change the contents of your eBook, you’ll want to edit these files. Often there may be separate files for each chapter, so you may have to use trial and error to find the one you need to edit. You could edit them by hand in Windows using Notepad if you don’t have an HTML editor installed. A better option would be to use an HTML editor. Here we’ll use the free KompoZer program to edit the files just like we’d edit a document in Word. Download KompoZer (link below), and unzip the files. Then open the new folder and launch kompozer.exe; you don’t even need to install it. In fact, you could even store KompoZer on a flash drive so you could edit HTML files from any computer. In KompoZer, open the HTML or XHTML file from your eBook that you want to edit. Now you can edit the file just like you would edit a document in Word. Remove extra and unneeded text, make titles stand out, correct misspellings … anything you want! This is especially helpful if your ePub file was created by converting a PDF as these often have many small errors. Or, if you’d rather edit the code itself, select the Source tab and edit as you wish. When you’re done making the changes, make sure to save the file in the same location with the same file name. Recreate Your Edited ePub eBook Once you’ve made all the changes you wanted, it’s time to turn this folder of files back into ePub. Make sure you change the name of the folder if it still has the same name as the original ePub or zip file so you don’t mix them up or have trouble with overwriting the old files. Zip the folder using Windows Explorer or your favorite archival utility. If you are using another archival program, make sure to compress it as a zip folder; other compression methods will render the ePub unreadable by your eReader app. Now change the file extension again, this time back to .epub. Now you can read your eBook with your changes in your favorite reader program or app on your mobile device. Conclusion Whether you need to remove an odd, misplaced character or need to do fine editing, using an HTML editor is a great way to make your ePub eBooks look just like you want. Also, with an editor like KompoZer it’s not even difficult. Download KompoZer Similar Articles Productive Geek Tips Change the Default Editor From Nano on Ubuntu LinuxConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCEdit Your Firefox Bookmarks Easier with Flat Bookmark EditorChange the Default Editor for Batch Files in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter

Read the article

PHP OCI8 and Oracle 11g DRCP Connection Pooling in Pictures

- by christopher.jones

Here is a screen shot from a PHP OCI8 connection pooling demo that I like to run. It graphically shows how little database host memory is needed when using DRCP connection pooling with Oracle Database 11g. Migrating to DRCP can be as simple as starting the pool and changing the connection string in your PHP application. The script that generated the data for this graph was a simple "Parts" query application being run under various simulated user loads. I was running the database on a small Oracle Linux server with just 2G of memory. I used PHP OCI8 1.4. Apache is in pre-fork mode, as needed for PHP. Each graph has time on the horizontal access in arbitrary 'tick' time units. Click the image to see it full sized. Pooled connections Beginning with the top left graph, At tick time 65 I used Apache's 'ab' tool to start 100 concurrent 'users' running the application. These users connected to the database using DRCP: $c = oci_pconnect('phpdemo', 'welcome', 'myhost/orcl:pooled'); A second hundred DRCP users were added to the system at tick 80 and a final hundred users added at tick 100. At about tick 110 I stopped the test and restarted Apache. This closed all the connections. The bottom left graph shows the number of statements being executed by the database per second, with some spikes for background database activity and some variability for this small test. Each extra batch of users adds another 'step' of load to the system. Looking at the top right Server Process graph shows the database server processes doing the query work for each web user. As user load is added, the DRCP server pool increases (in green). The pool is initially at its default size 4 and quickly ramps up to about (I'm guessing) 35. At tick time 100 the pool increases to my configured maximum of 40 processes. Those 40 processes are doing the query work for all 300 web users. When I stopped the test at tick 110, the pooled processes remained open waiting for more users to connect. If I had left the test quiet for the DRCP 'inactivity_timeout' period (300 seconds by default), the pool would have shrunk back to 4 processes. Looking at the bottom right, you can see the amount of memory being consumed by the database. During the initial quiet period about 500M of memory was in use. The absolute number is just an indication of my particular DB configuration. As the number of pooled processes increases, each process needs more memory. You can see the shape of the memory graph echoes the Server Process graph above it. Each of the 300 web users will also need a few kilobytes but this is almost too small to see on the graph. Non-pooled connections Compare the DRCP case with using 'dedicated server' processes. At tick 140 I started 100 web users who did not use pooled connections: $c = oci_pconnect('phpdemo', 'welcome', 'myhost/orcl'); This connection string change is the only difference between the two tests. At ticks 155 and 165 I started two more batches of 100 simulated users each. At about tick 195 I stopped the user load but left Apache running. Apache then gradually returned to its quiescent state, killing idle httpd processes and producing the downward slope at the right of the graphs as the persistent database connection in each Apache process was closed. The Executions per Second graph on the bottom left shows the same step increases as for the earlier DRCP case. The database is handling this load. But look at the number of Server processes on the top right graph. There is now a one-to-one correspondence between Apache/PHP processes and DB server processes. Each PHP processes has one DB server processes dedicated to it. Hence the term 'dedicated server'. The memory required on the database is proportional to all those database server processes started. Almost all my system's memory was consumed. I doubt it would have coped with any more user load. Summary Oracle Database 11g DRCP connection pooling significantly reduces database host memory requirements allow more system memory to be allocated for the SGA and allowing the system to scale to handled thousands of concurrent PHP users. Even for small systems, using DRCP allows more web users to be active. More information about PHP and DRCP can be found in the PHP Scalability and High Availability chapter of The Underground PHP and Oracle Manual.

Read the article

My History with Agile

- by Robert May

I’m going to write my history with Agile here. That way, in future posts, I can refer back to it, instead of typing it out in the post that contains information you may actually want to read. Note that I’m actually a pretty senior developer, and do lots of technical interviews. I’m an Agile fan because of the difference it makes in peoples lives and the improvement in quality it brings, and I’ll sacrifice my technological advance to help teams. Management History I started management pretty early in my career, starting with the first job that I ever had. I actually do NOT have a CS or similar degree. I have a Bachelor’s of Business Administration with an emphasis in Computer Information Systems. My first management gigs were around call center work and were very schedule oriented. I didn’t understand the true value of teams, and I’m ashamed to admit, I actually installed a fingerprint scanner as a time clock in this job. I shudder to think of the impact that I had on the team spirit. I didn’t even trust them enough to fill out their time cards correctly. How sad. I was managing nearly 100 people in this position, with the help of a great set of subordinates. I did try to come up with reward programs for the team, but again, didn’t understand the concept of team, so instead of letting the team determine how the rewards should work, I mandated from on high, which isn’t a good thing. I was told that I wasn’t the type that would be a good manager by people whom I respected a lot. They said it because I was a computer geek, since they don’t understand good management either, but in retrospect, they were right about me then. I was too green. After my first job, I went on to other jobs and with the exception of one job, I’ve managed people at them all. The rest of the management story is important for understanding agile, so I’ll save it for my next post. Technical History I’ve been in software development for many, many years. I technically started programming on a commodore 64 in basic. I didn’t know that I was programming, but I was sure having fun. That was followed by batch files, Gorilla hacking (I always had to win), WordPerfect Macro programming and other things that taught me the basics. My first “real” job was with a telephone company, and that’s where I made my first database application in DataEase, wrote my first VBA app and started using real programming tools, like turbo pascal, vb3-vb5, and semi-real tools like RPG and VisualRPG. I wrote my first web page in 1994, and built my first data driven web page in 1995 using perlDB. You really can do anything with Perl. At this time, I also started a Linux based internet service provider that is still in operation today. One of the people I worked with is now a Microsoft employee building and designing frameworks you probably know well. Smart guy. I also built my first ASP applications connecting to Sql Server 6.5, setup Exchange 5.5 for the company, and many other system administration stuff. I’m a programmer by choice, mostly because I don’t really like PC support. From there, I went on to a large state agency. I got to see and maintain true waterfall projects. 5 years of maintaining the 200 VB COM+ (MTS, actually) dlls that were used to calculate a single number is a long time. That was all Microsoft DNS technologies. SQL Server and VB6 were the tools of choice, although .net started to be a factor near the end of employment. I did some heavy XML work at this job and even wrote an XSD parser and validator in VB6 that was a shim until MSXML 3.0 came out. Prior to 3.0, XSD’s weren’t supported, and I didn’t want to write DTDs. Ironically, jobs after this were more generic. I pretty much settled in on the .net framework and revisions of it. Lots of WPF, some silverlight, lots of ASP.NET, some SQL Azure, lots of SQL Server, some Oracle, but I don’t think that I was as passionate about development and technologies. I was more into the management of development. I like people. Technorati Tags: Agile,history

Read the article

Messaging Systems – Handshaking, Reconciliation and Tracking for Data Transparency

- by Ahsan Alam

As many corporations build business partnerships with other organizations, the need to share information becomes necessary. Large amount of data sharing using snail mail, email and/or fax are quickly becoming a thing of the past. More and more organizations are relying heavily on Ftp and/or Web Service to exchange data. Corporations apply wide range of technologies and techniques based on available resources and data transfer needs. Sometimes, it involves simple home-grown applications. Other times, large investments are made on products like BizTalk, TIBCO etc. Complexity of information management also varies significantly from one organizations to another. Some may deal with handful of simple steps to process and manage shared data; whereas others may rely on fairly complex processes with heavy interaction with internal and external systems in order to serve the business needs. It is not surprising that many of these systems end up becoming black boxes over a period of time. Consequently, people and business start to rely more and more on developers and support personnel just to extract simple information adding to the loss of productivity. One of the most important factor in any business is transparency to data irrespective of technology preferences and the complexity of business processes. Not knowing the state of data could become very costly to the business. Being involved in messaging systems for some time now, I have heard the same type of questions over and over again. Did we transmit messages successfully? Did we get responses back? What is the expected turn-around-time? Did the system experience any errors? When one company transmits data to one or more company, it may invoke a set of processes that could complete in matter of seconds, or it could days. As data travels from one organizations to another, the uncertainty grows, and the longer it takes to track uncertain state of the data the costlier it gets for the business, So, in every business scenario, it's extremely important to be aware of the state of the data. Architects of messaging systems can take several steps to aid with data transparency. Some forms of data handshaking and reconciliation mechanism as well as extensive data tracking can be incorporated into the system to provide clear visibility to the data. What do I mean by handshaking and reconciliation? Some might consider these to be a single concept; however, I like to consider them in two unique categories. Handshaking serves as message receipts or acknowledgment. When one transmits messages to another, the receiver must acknowledge each message by sending immediate responses for each transaction. Whenever we use Web Services, handshaking is often achieved utilizing request/reply pattern. Similarly, if Ftp is used, a receiver can acknowledge by dropping messages for the sender as soon as the files are picked up. These forms of handshaking or acknowledgment informs the message sender and receiver that a successful transaction has occurred. I have mentioned earlier that it could take anywhere from a few seconds to a number of days before shared data is completely processed. In addition, whenever a batched transaction is used, processing time for each data element inside the batch could also vary significantly. So, in order to successfully manage data processing, reconciliation becomes extremely important; otherwise it may result into data loss or in some cases hefty penalty. Reconciliation can be done in many ways. Partner organizations can share and compare ad hoc reports to achieve reconciliation. On the other hand, partners can agree on some type of systematic reconciliation messages. Systems within responsible parties can trigger messages to partners as soon as the data process completes. Next step in the data transparency is extensive data tracking. Some products such as BizTalk and TIBCO provide built-in functionality for data tracking; however, built-in functionality may not always be adequate. Sometimes additional tracking system (or databases) needs to be built in order monitor all types of data flow including, message transactions, handshaking, reconciliation, system errors and many more. If these types of data are captured, then these can be presented to business users in any forms or fashion. When business users are empowered with such information, then the reliance on developers and support teams decreases dramatically. In today's collaborative world of information sharing, data transparency is key to the success of every business. The state of business data will constantly change. However, when people have easier access to various states of data, it allows them to make better and quicker decisions. Therefore, I feel that data handshaking, reconciliation and tracking is very important aspect of messaging systems.

Read the article

Get your content off Blogger.com

- by Daniel Moth

Due to blogger.com deprecating FTP users I've decided to move my blog. When I think of the content of a blog, 4 items come to mind: blog posts, comments, binary files that the blog posts linked to (e.g. images, ZIP files) and the CSS+structure of the blog. 1. Binaries The binary files you used in your blog posts are sitting on your own web space, so really blogger.com is not involved with that. Nothing for you to do at this stage, I'll come back to these in another post. 2. CSS and structure In the best case this exists as a separate CSS file on your web space (so no action for now) or in a worst case, like me, your CSS is embedded with the HTML. In the latter case, simply navigate from you dashboard to "Template" then "Edit HTML" and copy paste the contents of the box. Save that locally in a txt file and we'll come back to that in another post. 3. Blog posts and Comments The blog posts and comments exist in all the HTML files on your own web space. Parsing HTML files to extract that can be painful, so it is easier to download the XML files from blogger's servers that contain all your blog posts and comments. 3.1 Single XML file, but incomplete The obvious thing to do is go into your dashboard "Settings" and under the "Basic" tab look at the top next to "Blog Tools". There is a link there to "Export blog" which downloads an XML file with both comments and posts. The problem with that is that it only contains 200 comments - if you have more than that, you will lose the surplus. Also, this XML file has a lot of noise, compared to the better solution described next. (note that a tool I will refer to in a future post deals with either kind of XML file) 3.2 Multiple XML files First you need to find your blog ID. In case you don't know what that is, navigate to the "Template" as described in section 2 above. You will find references to the blog id in the HTML there, but you can also see it as part of the URL in your browser: blogger.com/template-edit.g?blogID=YOUR_NUMERIC_ID. Mine is 7 digits. You can now navigate to these URLs to download the XML for your posts and comments respectively: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=1 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=1 Note that you can only get 500 posts at a time and only 200 comments at a time. To get more than that you have to change the URL and download the next batch. To get you started, to get the XML for the next 500 posts and next 200 comments respectively you’d have to use these URLs: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=501 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=201 ...and so on and so forth. Keep all the XML files in the same folder on your local machine (with nothing else in there). 4. Validating the XML aka editing older blog posts The XML files you just downloaded really contain HTML fragments inside for all your blog posts. If you are like me, your blog posts did not conform to XHTML so passing them to an XML parser (which is what we will want to do) will result in the XML parser choking. So the next step is to fix that. This can be no work at all for you, or a huge time sink or just a couple hours of pain (which was my case). The process I followed was to attempt to load the XML files using XmlDocument.Load and wait for the exception to be thrown from my code. The exception would point to the exact offending line and column which would help me fix the issue. Rather than fix it in the XML itself, I would go back and edit the offending blog post and fix it there - recommended! Then I'd repeat the cycle until the XML could be loaded in the XmlDocument. To give you an idea, some of the issues I encountered are: extra or missing quotes in img and href elements, direct usage of chevrons instead of encoding them as <, missing closing tags, mismatched nested pairs of elements and capitalization of html elements. For a full list of things that may go wrong see this. 5. Opportunity for other changes I also found a few posts that did not have a category assigned so I fixed those too. I took the further opportunity to create new categories and tag some of my blog posts with that. Note that I did not remove/change categories of existing posts, but only added. In an another post we'll see how to use the XML files you stored in the local folder… Comments about this post welcome at the original blog.

Read the article

F# for the C# Programmer

- by mbcrump

Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#? Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System; namespace ConsoleApplication9 { class Program { static void Main(string[] args) { var a = 2; Console.WriteLine(a); Console.ReadLine(); } } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2 Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#. Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

Read the article

Fusion HCM SaaS – Integration

- by Kiran Mundy

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

Read the article

Converting Creole to HTML, PDF, DOCX, ..

- by Marko Apfel

Challenge We documented a project on Github with the Wiki there. For most articles we used Creole as markup language. Now we have to deliver a lot of the content to our client in an usual format like PDF or DOCX. So we need a automatism to extract all relevant content, merge it together and convert the stuff to a new format. Problem One of the most popular toolsets to convert between several formats is Pandoc. But unfortunally Pandoc does not support Creole (see the converting matrix). Approach So we need an intermediate step: Converting from Creole to a supported Pandoc format. Creolo/c is a Creole to Html converter and does exactly what we need. After converting our Creole content to Html we could use Pandoc for all the subsequent tasks. Solution Getting the Creole stuff First at all we need the Creole content on our locale machines. This is easy. Because the Github Wiki themselves is a Git repository we could clone it to our machine. In the working copy we see now all the files and the suffix gives us the hint for the markup language. Converting and Merging Creole content to Html Because we would like all content from several Creole files in one HTML file, we have to convert and merge all the input files to one output file. Creole/c has an option (-b) to generate only the Html-stuff below a Html <Body>-tag. And this is hook for us to start. We have to create manually the additional preluding Html-tags (<html>, <head>, ..), then we merge all needed Creole content to our output file and last we add the closing tags. This could be done straightforward with a little bit old DOS magic: REM === Generate the intro tags === ECHO ^<html^> > %TMP%\output.html ECHO ^<head^> >> %TMP%\output.html ECHO ^<meta name="generator" content="creole/c"^> >> %TMP%\output.html ECHO ^</head^> >> %TMP%\output.html ECHO ^<body^> >> %TMP%\output.html REM === Mix in all interesting Creole stuff with creole/c === .\Creole-C\bin\creole.exe -b .\..\datamodel+overview.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdCaptureMode.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdDamageReducingActivity.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+lookup+IncidentDamageCodes.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+Attachments.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+TrafficLights.creole >> %TMP%\output.html REM === Generate the outro tags === ECHO ^</body^> >> %TMP%\output.html ECHO ^</html^> >> %TMP%\output.html REM === Convert the Html file to Docx with Pandoc === .\Pandoc\bin\pandoc.exe -o .\Database-Schema.docx %TMP%\output.html Some explanation for this The first ECHO call creates the file. Therefore the beginning <html> tag is send via > to a temporary working file. All following calls add content to the existing file via >>. The tag-characters < and > must be escaped. This is done by the caret sign (^). We use a file in the default temporary folder (%TMP%) to avoid writing in our current folders. (better for continuous integration) Both toolsets (Creole/c and Pandoc) are copied to a versioned tools folder in the Wiki. This is committable and no problem after pushing – Github does not do anything with it. In this folder is also the batch (Export-Docx.bat) for all the steps. Pandoc recognizes the conversion by the suffixes of the file names. So it is enough to specify only the input and output files.

Read the article

Dynamic Bursting ... no really!

- by Tim Dexter

If any of you have seen me or my colleagues present BI Publisher to you then we have hopefully mentioned 'bursting.' You may have even seen a demo where we talk about being able to take a batch of data, say invoices. Then split them by some criteria, say customer id; format them with a template; generate the output and then deliver the documents to the recipients with a click. We and especially I, always say this can be completely dynamic! By this I mean, that you could store customer preferences in a database. What layout would each customer like; what output format they would like and how they would like the document delivered. We (I) talk a good talk, but typically don't do the walk in a demo. We hard code everything in the bursting query or bursting control file to get the concept across. But no more peeps! I have finally put together a dynamic bursting demo! Its been minutes in the making but its been tough to find those minutes! Read on ... It's nothing amazing in terms of making the burst dynamic. I created a CUSTOMER_PREFS table with some simple UI in an APEX application so that I can maintain their requirements. In EBS you have descriptive flexfields that could do the same thing or probably even 'contact' fields to store most of the info. Here's my table structure: Name Type ------------------------------ -------- CUSTOMER_ID NUMBER(6) TEMPLATE_TYPE VARCHAR2(20) TEMPLATE_NAME VARCHAR2(120) OUTPUT_FORMAT VARCHAR2(20) DELIVERY_CHANNEL VARCHAR2(50) EMAIL VARCHAR2(255) FAX VARCHAR2(20) ATTACH VARCHAR2(20) FILE_LOC VARCHAR2(255) Simple enough right? Just need CUSTOMER_ID as the key for the bursting engine to join it to the customer data at burst time. I have not covered the full delivery options, just email, fax and file location. Remember, its a demo people :0) However the principal is exactly the same for each delivery type. They each have a set of attributes that need to be provided and you will need to handle that in your bursting query. On a side note, in EBS, you use a bursting control file, you can apply the same principals that I'm laying out here you just need to get the customer bursting info into the XML data stream so that you can refer to it in the control file using XPATH expressions. Next, we need to look up what attributes or parameters are required for each delivery method. that can be found in the documentation here. Now we know the combinations of parameters and delivery methods we can construct the query using a series a decode statements: select distinct cp.customer_id "KEY", cp.template_name TEMPLATE, cp.template_type TEMPLATE_FORMAT, 'en-US' LOCALE, cp.output_format OUTPUT_FORMAT, 'false' SAVE_FORMAT, cp.delivery_channel DEL_CHANNEL, decode(cp.delivery_channel,'FILE', cp.file_loc , 'EMAIL', cp.email , 'FAX', cp.fax) PARAMETER1, decode(cp.delivery_channel,'FILE', c.cust_last_name||'_orders.pdf' ,'EMAIL','[email protected]' ,'FAX', 'faxserver.com') PARAMETER2, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX', null) PARAMETER3, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Your current orders' ,'FAX',NULL) PARAMETER4, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Please find attached a copy of your current orders with BI Publisher, Inc' ,'FAX',NULL) PARAMETER5, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','false' ,'FAX',NULL) PARAMETER6, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX',NULL) PARAMETER7 from cust_prefs cp, customers c, orders_view ov where cp.customer_id = c.customer_id and cp.customer_id = ov.customer_id order by cp.customer_id Pretty straightforward, just need to test, test, test, the query and ensure it's bringing back the correct data based on each customers preferences. Notice the NULL values for parameters that are not relevant for a given delivery channel. You should end up with bursting control data that the bursting engine can use: Now, your users can run the burst and documents will be formatted, generated and delivered based on the customer prefs. If you're interested in the example, I have used the sample OE schema data for the base report. The report files and CUST_PREFS table are zipped up here. The zip contains the data model (.xdmz), the report and templates (.xdoz) and the sql scripts to create and load data to the CUST_PREFS table. Once you load the report into the catalog, you'll need to create the OE data connection and point the data model at it. You'll probably need to re-point the report to the data model too. Happy Bursting!

Read the article

How to install iodbc in Ubuntu 12.10

- by Hanynowsky

I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

Read the article

Silverlight Cream for December 18, 2010 -- #1012

- by Dave Campbell

In this Issue: Mark Monster, Kevin Dockx, Jeremy Likness(-2-,-3-), Timmy Kokke, Den Delimarsky, Mike Snow, Samuel Jack(-2-), and Renuka Prasad(-2-). Above the Fold: Silverlight: "Trigger a Storyboard on ViewModel changes" Mark Monster WP7: "Microsoft Push Notification in Windows Phone 7" Renuka Prasad Shoutouts: SilverlightGal sent me the link to The Silverlight Dossier ... I think it's a pretty good start... additions I'd like to see are ways to submit to the various areas. Michael Crump put up a contest that runs from now to January 1st... Win a set of Infragistics Silverlight Controls with Data Visualization!... pretty cool, Michael! If you visit WynApse.com, you'll see I have a subscription to LearnVisualStudio.net... and now they have posted a batch of WP7 videos... 64 of them to be exact... wow!: New video series From SilverlightCream.com: Trigger a Storyboard on ViewModel changes Mark Monster has a great post up about triggering Storyboard on ViewModel changes using the DataTrigger from Blend... cool stuff, and you can also do GoToStateAction or other actions or build yourowndang Trigger Action... fun awaits! ... sorry it took a while to post, Mark... been a tad overloaded here! Working with the Silverlight Rich Text Box control Kevin Dockx has had a post up for a while at SilverlightShow where he takes a good look at the RichText control and it's various capabilities, including source so you can give it a dance yourself. Lessons Learned in Personal Web Page Part 3: Custom Panel and Listbox Jeremy Likness's part 3 of his Personal Web Page lessons learned is covering the tres-cool 3D Panel he did... and he's got it all explained out... building from scratch via a custom panel and a Listbox control... A Silverlight MVVM Feed Reader from Scratch in 30 Minutes Jeremy Likness has a video tutorial showing building an MVVM/Silverlight feedreader in 30 minutes ... plus a couple mods that he noticed after the fact... beat that HTML5 :) Jounce Part 8: Raising Property Changed In Jeremy Likness's latest post, he has number 8 in his series on his MVVM platform, Jounce. This time he's explaining the property changed notification, has a very cool way of doing it, and some interesting comments from readers. Dependency Injection, MVVM, Ninject and Silverlight Timmy Kokke has a great tutorial up with associated demo project on Dependency Injection in MVVM and Silverlight. Some hidden features in the Windows Phone 7 emulator Den Delimarsky shows how to get some of the hidden features on your WP7 emulator like the Call History, Call Settings, and Details about the numbers. Playing sound effects on Windows Phone 7 Mike Snow's latest tip is playing sound effects on your WP7 ... a little bit of XNA here and there, and badabing, badaboom, you got sound! Day 3 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack has a couple more posts up about his 'Build a WP7 game in 3 Days' challenge... first up is Day 3 from 8:50 to 22:30 ... wow... long day! ... but he's got something good going now... some good external links also Day 3.5 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack's 3rd day ended with another half-day added on to put on some finishing touches... again, some good external links... and he finished with this Say hello to Simon Squared, my 3.5 day old WP7 Game Microsoft Push Notification in Windows Phone 7 Renuka Prasad has a bunch of material up that I've not been aware of (how did that happen, people??) ... here's the first of a couple of his posts on Code Project ... a very nice tutorial on the Push Notification process... great diagrams and external links. Windows Phone 7 – Toast Notification Using Windows Azure Cloud Service Renuka Prasad has another WP7 post on CodeProject... this one on Toast Notification... and he's using Azure and WCF all rolled into it as well... great diagrams, descriptions and all the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Search Results

Search found 2563 results on 103 pages for 'batch'.

Page 95/103 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102 | Next Page >

- by Luc

- by Will Martin

- by Serge

- by LiuYan ??

- by Jay Michaud

- by Backtogeek

- by Josh W.

- by Zac B

- by Ones and Zeroes

- by ifunky

- by user1514042

- by Derek Meier

- by DigitalGeekery

- by Bill Graziano

- by Matthew Guay

- by christopher.jones

- by Robert May

- by Ahsan Alam

- by Daniel Moth

- by mbcrump

- by Kiran Mundy

- by Marko Apfel

- by Tim Dexter

- by Hanynowsky

- by Dave Campbell

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102 | Next Page >