Search Results

Search found 12887 results on 516 pages for 'hard boiled wonderland'.

Page 95/516 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Windows Recovery Console - forgot password

    - by Jason
    I upgraded to Windows XP SP3, which immediately "broke" the laptop - it never booted with SP3 on it. I put in the Windows XP install disk I had originally used to set up the laptop, and it ran for a while, then said there's no hard disk present, so it can't continue. BIOS still sees the hard disk. I put the hard disk in an external USB case, and I can read/write to it with the other laptop. I then put the hard disk back in it's laptop, restarted with the Windows CD, and tried to get into the Recovery Console, but I forgot the password and can't "log on" to the drive. I'd also like to know if I can fix the broken files (which ones?) from the other laptop (via USB), and if I can "log on" to an external disk with the Recovery Console. (Also, the data won't fit on my other laptop, and I don't have all the install CDs for software on the disk.) Any help appreciated.

    Read the article

  • Migration from XP to Windows 7 using recovered HD

    - by KenK
    Is it possible to migrate the Windows XP Pro 32 bit operating system, applications etc from a USB external drive which is the recovered hard drive from that failed system to my new desktop computer with Windows7 64 bit system? In doing so, I would like to set up the new computer with the OS and all general applications on the primary 1TB hard drive while the secondary 1TB hard drive to have nothing else but graphics programs and gaming applications complete with their related files and add-ons. What will I need to accomplish this task efficiently and economically?

    Read the article

  • Good Free Backup Tool - with provisos

    - by vaccano
    I have seen some Backup Questions around. But they are not quite what I am looking for. I would like to have a back up of my entire hard drive (to an external drive). I would like it to be the kind that has a base backup then just backs up the changes since the last backup. I would like it to be able to have a fully restorable image of my hard drive (not just key files). Lastly I would like it to be free (or super cheap). (The above requirements are important, but I will have to drop them if they up the price as my boss will not pay for them.) I have a Solid State Hard Drive 250 GB backing up to a 1TB external hard drive using Windows XP.

    Read the article

  • Raid HDD Boot up

    - by user234695
    My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

    Read the article

  • Run a BitLocker protected Windows 7 installation on VirtualBox from physical drive

    - by djechelon
    I have a broken laptop with its hard drive intact. I'll be getting it repaired in a few days but I must continue my work possibly uninterrupted, so I chose to run the OS in another working laptop (I can't just transfer documents). My question is really simple: Can I create a virtual machine in VirtualBox (under Linux) that uses the physical hard drive mentioned above which is encrypted with BitLocker? I have the restore key at hand, of course. I wouldn't like to mount the hard disk as primary hard disk for laptop (and run 7 as primary OS), but that could be the final choice if virtualizing is not an option. Thank you.

    Read the article

  • hardlinking takes a lot of space

    - by mr_schlomo
    I made an rsync incremental backup script for my server that will copy a MySQL database backup and a specified folder path to a remote server. Here's the code on Github. Code excerpt from lines 53-57: ############### Create most current hand link echo "Creating most current hard link on backup server $most_recent_backup_link" ssh $remote_backup_server rm -rf ${most_recent_backup_link} ssh $remote_backup_server cp -alv ${remote_backup_folder}/backup-${backup_folder_name}/ ${most_recent_backup_link} I'm having a problem with creating the most current hard links on the backup server (lines 53-57 in the program). Everything works, and rsync only copies about 1-2MB of data. But the hard link copy process uses about 30MB of data. I get a huge laundry list of files that haven't changed and the only ones that have changed are very small in size. Normally this isn't a problem, but when you backup every hour, the backup should be as small as possible. For example, the last backup I did, rsync transferred 1.3MB. But the backup directory grew 35MB. Why are the hard links taking up so much hard drive space?

    Read the article

  • Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

    - by techaddict
    Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

    Read the article

  • Disable Acer eRecovery system

    - by Joel Coehoorn
    The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

    Read the article

  • Stack Over Flow Message

    - by atul
    I have created an image of my original hard disk, now i have started my pc by image hard disk, windows xp is working fine. but when we are running an other application programm, we are receiving an error message of Stack Over Flow. While my original hard disk is working fine. We don't know that programm is written in which language. I have only exe file of that. Can any one suggest, what may be the reason.

    Read the article

  • How can I mount an AES-128 encrypted DMG file using the NTFS file system under Windows XP?

    - by flarn2006
    I found HFSExplorer, which can handle encrypted DMG files, but it only supports HFS, and the DMG I want to open is NTFS. I can't just use any image mounter since the DMG file is encrypted, and I don't want to need to copy it over to my main hard drive first. (The DMG is on an external hard drive.) If copying it is the only way, however, I'd be willing to settle for that, but I'd rather just leave it on the external hard drive in an encrypted form.

    Read the article

  • How do I copy/clone a dynamic disk in Windows 7?

    - by PP
    I have some dynamic disks (or "partitions" but they are not really partitions) that I want to copy onto spare hard drives. I tried using gpartd (and fdisk for that matter) from a linux live disc. All it saw was hard drives with only one partition encasing the whole hard drive. So gpartd/fdisk is incapable of identifying the dynamic "partitions" and allowing me to copy them. Any tools that can be used to clone/copy a dynamic "partition"?

    Read the article

  • High I/O latency with software RAID, LUKS encrypted and LVM partitioned KVM setup

    - by aef
    I found out a performance problems with a Mumble server, which I described in a previous question are caused by an I/O latency problem of unknown origin. As I have no idea what is causing this and how to further debug it, I'm asking for your ideas on the topic. I'm running a Hetzner EX4S root server as KVM hypervisor. The server is running Debian Wheezy Beta 4 and KVM virtualisation is utilized through LibVirt. The server has two different 3TB hard drives as one of the hard drives was replaced after S.M.A.R.T. errors were reported. The first hard disk is a Seagate Barracuda XT ST33000651AS (512 bytes logical, 4096 bytes physical sector size), the other one a Seagate Barracuda 7200.14 (AF) ST3000DM001-9YN166 (512 bytes logical and physical sector size). There are two Linux software RAID1 devices. One for the unencrypted boot partition and one as container for the encrypted rest, using both hard drives. Inside the latter RAID device lies an AES encrypted LUKS container. Inside the LUKS container there is a LVM physical volume. The hypervisor's VFS is split on three logical volumes on the described LVM physical volume: one for /, one for /home and one for swap. Here is a diagram of the block device configuration stack: sda (Physical HDD) - md0 (RAID1) - md1 (RAID1) sdb (Physical HDD) - md0 (RAID1) - md1 (RAID1) md0 (Boot RAID) - ext4 (/boot) md1 (Data RAID) - LUKS container - LVM Physical volume - LVM volume hypervisor-root - LVM volume hypervisor-home - LVM volume hypervisor-swap - … (Virtual machine volumes) The guest systems (virtual machines) are mostly running Debian Wheezy Beta 4 too. We have one additional Ubuntu Precise instance. They get their block devices from the LVM physical volume, too. The volumes are accessed through Virtio drivers in native writethrough mode. The IO scheduler (elevator) on both the hypervisor and the guest system is set to deadline instead of the default cfs as that happened to be the most performant setup according to our bonnie++ test series. The I/O latency problem is experienced not only inside the guest systems but is also affecting services running on the hypervisor system itself. The setup seems complex, but I'm sure that not the basic structure causes the latency problems, as my previous server ran four years with almost the same basic setup, without any of the performance problems. On the old setup the following things were different: Debian Lenny was the OS for both hypervisor and almost all guests Xen software virtualisation (therefore no Virtio, also) no LibVirt management Different hard drives, each 1.5TB in size (one of them was a Seagate Barracuda 7200.11 ST31500341AS, the other one I can't tell anymore) We had no IPv6 connectivity Neither in the hypervisor nor in guests we had noticable I/O latency problems According the the datasheets, the current hard drives and the one of the old machine have an average latency of 4.12ms.

    Read the article

  • Restoring using SyncBack without profiles

    - by Thomas Matthews
    I backed up my internal hard drive (C:) using SyncBack onto an external (USB) hard drive with maximum compression. I then performed a clean install of Windows Vista onto the computer. I forgot to copy the SyncBack logs before the clean install. And now when ever I try to restore a directory, the RAR/ZIP files are copied to the system hard drive instead of extracting their contents to the hard drive. Also, SyncBack is not traversing the folders during the Restore process. How can I tell SyncBack to expand the compressed files? I am running the freeware version of SyncBack. I have to create new log files (unless SyncBack put them somewhere on the external drive). My alternative is to write a program that traverses the folders on the external drive and extracts files from the RAR/ZIP files. I am using Windows Vista, Service Pack 2, and the data size prior to backup was about 200 GB. (The backup process took over 72 hours due to "hiccups").

    Read the article

  • Unable to boot from SATA II and vista

    - by pencilslate
    Trying to use a SATA II hard drive on toshiba satellite notebook. The hard drive has vista installed on it from another notebook. After inserting the hard drive, the boot starts.. shows "Microsoft windows" the progress bar, and reboots, in a loop. The existing hard drive is SATA with xp on it. The replacement one is SATA II with vista on it. I wanna troubleshoot. But, don't know where to start. Any help is much appreciated!!

    Read the article

  • How do you create a bootable partition on a USB drive?

    - by Nathan DeWitt
    I have a bootable ISO designed to be burned to a double-layer DVD. I don't have a double layer DVD burner, so I would like to stick the ISO image on a 50 GB partition on a USB hard drive I have. How do I get the boot info onto the hard drive? If it helps, it's an OSx86 Live CD. Attempt 1: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Error Loading OS Atempt 2: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo mkdosfs -I -v -n iPC /dev/MyUSB sudo syslinux /dev/MyUSB sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Selected boot device not available - strike F1 to retry boot, F2 for setup utility

    Read the article

  • Clicking sound on MacBook Pro 13" 2010 model when turning the laptop on it's horizontal axis

    - by roosteronacid
    When I leave my MacBook Pro 13" level for a minute or two (sometimes I only need to keep it level for a few seconds), and then pick it up and turn it on it's horizontal axis, I hear a single click, coming from either the hard drive or the Super Drive. Is the click I am hearing some sort of locking mechanism in the hard drive? Or in the Super Drive?.. And therefore nothing to worry about. Or is either my Super Drive or hard drive faulty?

    Read the article

  • Stop Windows Automatic Update in boot menu or start up-sequence

    - by Andrew
    My girlfriend has a corrupted hard drive running Windows Vista. She is getting a new hard drive and has also purchased an external hard drive to back up her data. However windows downloaded an automatic updated and keeps getting held up and restarting when it trys to apply the update. Is there a way she can disable this from the boot menu or start-up sequence?

    Read the article

  • CentOS vps is randomly rebooting

    - by develroot
    I have a centos vps (Parallels Virtuozzo container) which has been running for months. However, a few days ago it started to randomly reboot itself, and i can't find out why. And the biggest problem that i don't understand is that it takes 40 minutes to reboot (as far as i can see in the logs) root ~ # cat /var/log/messages | grep shutdown Oct 11 13:52:11 vps27 shutdown[23968]: shutting down for system halt Oct 14 14:55:17 vps27 shutdown[30662]: shutting down for system halt Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt And notice the time difference between shutdown and xinetd's start: Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt Oct 15 06:21:24 vps27 init: Switching to runlevel: 0 Oct 15 06:21:27 vps27 saslauthd[30614]: server_exit : master exited: 30614 Oct 15 06:21:38 vps27 named[30661]: shutting down Oct 15 06:21:47 vps27 exiting on signal 15 Oct 15 07:04:34 vps27 syslogd 1.4.1: restart. Oct 15 07:05:06 vps27 xinetd[1471]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Oct 15 07:05:06 vps27 xinetd[1471]: Started working: 0 available services And here's what Parallels Power Panel says in terms of Status Changes: Time Old Status Status Obtained Oct 15, 2011 06:23:46 AM Mounted Down Oct 15, 2011 06:22:31 AM Running Mounted Oct 14, 2011 03:06:48 PM Starting Running Oct 14, 2011 03:06:23 PM Down Starting Oct 14, 2011 03:06:08 PM Mounted Down Oct 14, 2011 02:58:24 PM Running Mounted For some reason it's getting into Mounting mode and then restarts itself. The only problem that i can imagine is disk space utilization, which is now 84%. But can that be a reson for system halt? Time Category Details Type Parameter Oct 15, 2011 07:08:33 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:27:23 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:23:50 AM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used Oct 14, 2011 03:06:24 PM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 83 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 14, 2011 03:05:50 PM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used

    Read the article

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • How to recover data from software RAID 5 disk partition

    - by Ali n
    I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

    Read the article

  • Configure Raid On Red Hat 5

    - by Sopolin
    Hi all, I have a problem with configure raid on red hat enterprise linux. The problem is when I create raid on two hard disks. It works successfully but after I remove one hard disk. It works normally. It means that I plug in one hard disk for testing configure raid. But after that I put both hard disks and create other file. The raid is cleared. My question is: Why do I turn off server machine, it clears raid that I configure first time before I turn off? Could anyone help to solve this problem? Thank, Ung Sopolin

    Read the article

  • Wiping a laptop from Bios

    - by joshuahornby10
    I am trying to wipe an old laptops hard drive, it doesn't have a CD drive so have been using a USB to try and wipe the hard drive from the BIOS. I have been using http://www.dban.org/ which I installed as an ISO on the USB Stick. When ever I try to boot into this I get an error saying 'No operating system' Does anyone know of a way to wipe a hard drive? I also tried to boot into safe mode but I just stay on a constant loop. Thanks

    Read the article

  • Using old RAID configured disk after new disk has been used in the controller

    - by Narendra
    I have Dell Poweredge T100 server with Dell SAS 6 and two hard disk on RAID 1. Last week the server died including one RAID 1 hard disk. We sent the server for repair and the problem with PSU was fixed. But the repair guys also checked the RAID controller by configuring new RAID with their test hard disk. Now if I install one working RAID 1 disk and one new disk, will the RAID controller let me continue my old RAID 1 and resync the new disk and continue? What I fear is the RAID controller will want the test hard from repair guys. Thus I have to re configure RAID 1 forcing me to wipe the working disc. If so, I've to backup the working disc, reconfigure RAID 1 and reinstall? Or is there better way? Note: I'm using DELL SAS confiugratio utility to manage RAID. (Press CTRL+C after BIOS)

    Read the article

  • How to port VirtualBox machines with the recent snapshot?

    - by Liran Orevi
    I've ported a 'hard disk' using the 'clonehd' advice given on How to easily port VirtualBox machines? But it's not at the latest state, it's probably before any 'snapshot' was taken. I have only copied the 'hard disk', I haven't copied any 'snapshot' mainly because there are so many. I'm interested to transfer the 'hard disk' at it's latest state. How can this be done? (easily and not by coping the entire snapshots, machine etc...)

    Read the article

  • Power supply switch like stays off motherboard light turns on

    - by Sion
    I bought a computer at the thrift store yesterday. The computer powered on without any error beeps. Getting it back to the house determined that the CD and hard drive needed to be changed. Put in a populated hard drive to check, the computer turned on and seemed to function. Put in a new CD drive, and just put in a new Hard drive. I plugged it in to check and I noticed that the light for the power supply switch did not come on. But I did notice that the light on the motherboard is lit. and I could not turn the computer on. To help troubleshoot it I unplugged the CD and Hard drive. then re-plugged the power supply and switched it on and off. Nothing changed. Parts: Motherboard: Digital Home PSW DH deluxe Power Supply: FSP-Group FX700-GLN Did I accidentally unplug something while installing the hard drive? Is the Power supply fried somehow?

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >