Search Results

Search found 8048 results on 322 pages for 'partial upgrade'.

Page 95/322 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Thanks to all attendees in Seattle and Toronto

    - by Mike Dietrich
    Must be an Oracle sponsored number plate ... Thanks to everybody who did attend to our Upgrade Workshops in Seattle and Toronto past week. Seattle had a quite unusual track setup with two parallel breakout sessions. We hope you've enjoyed it as well. And you'll find the slides for the keynote "New Features" and the "Upgrade Workshop - The Whole Story" presentations below. Toronto was quite amazing as well - with so many (hope not too many) people in this slightly crowded room at the Interconti in Toronto. We've got a lot of interesting and sometimes challenging questions. And we would like to thank you for your patience Please find all the slides here: Upgrade Workshop ~545 slides "The Whole Story" presentation New Features for Oracle Database 11g Release 2 - Roy's keynote from Seattle  For me it was the first time in Canada and even though it was a very short stopover I did enjoy it very much. Roy and me had a dinner at CN Tower and besides good food some marvelous view. Didn't know before that Toronto within its city limits it's the fifth most populous city in North America. And even though paritally Air Canada ground personell was on strike I did catch my flight to Boston after the workshop Thanks again and hope to see you next time again - happy upgrades Mike

    Read the article

  • Oracle E-Business Suite Release 12.1 Certified on Solaris 11

    - by John Abraham
    Oracle Solaris 11 was announced last week, and I'm pleased to also announce that Oracle E-Business Suite Release 12.1 is now certified on Oracle Solaris on SPARC (64-bit). This new operating system release represents a culmination of years of hard work by our Solaris engineering group.  It has a number of new and advanced features including simplified deployment and lifecycle management tools, built-in certified virtualization technologies, support on the latest generation SPARC chips, and more. New installations of the E-Business Suite R12 on this platform will require version 12.1.1 or higher and the latest Rapid Install startCD version 12.1.1.13.  For existing 12.1 installations, we have also certified an "in place" OS upgrade or the use of cloning to a target Solaris 11 system. There are also specific requirements to upgrade technology components such as the Oracle Database and Fusion Middleware.  These requirements are noted in the links below. References Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (My Oracle Support Document 761568.1) Oracle Database Installation Guide 11g Release 2 (11.2) for Oracle Solaris Interoperability Notes Oracle E-Business Suite Release 12 with Oracle Database 11g Release 2 (11.2.0) (My Oracle Support Document 1058763.1) Cloning Oracle Applications Release 12 with Rapid Clone (My Oracle Support Document 406982.1) Related Articles New Rapid Install StartCD (12.1.1.13) for Oracle E-Business Suite Release 12.1 Now Available Oracle E-Business Suite Release 12.1.3 Now Available

    Read the article

  • How to fix E: Internal Error, No file name for libc6

    - by Loren Ramly
    How to fix E: Internal Error, No file name for libc6, Like that will show If I do: $ sudo apt-get upgrade or $ sudo apt-get install package This is example : $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn hplip hplip-data libdrm-dev libdrm-intel1 libdrm-nouveau1a libdrm-radeon1 libdrm2 libgrip0 libhpmud0 libkms1 libsane-hpaio libunity-2d-private0 libunity-core-5.0-5 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae printer-driver-hpcups printer-driver-hpijs unity unity-2d-common unity-2d-panel unity-2d-shell unity-2d-spread unity-common unity-services The following packages will be upgraded: alsa-base firefox firefox-globalmenu firefox-gnome-support firefox-locale-en icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-7-jre-jamvm libdbus-glib-1-2 libdbus-glib-1-dev libgnutls-dev libgnutls-openssl27 libgnutls26 libgnutlsxx27 libssl-dev libssl-doc libssl1.0.0 linux-sound-base openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openjdk-7-jdk openjdk-7-jre openjdk-7-jre-headless openjdk-7-jre-lib openssl sudo 27 upgraded, 0 newly installed, 0 to remove and 26 not upgraded. 3 not fully installed or removed. Need to get 0 B/126 MB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y E: Internal Error, No file name for libc6 I have follow instruction from here E: Internal Error, No file name for libssl1.0.0 . Which do: sudo apt-get update sudo apt-get clean sudo apt-get install -fy sudo dpkg -i /var/cache/apt/archives/*.deb sudo dpkg --configure -a sudo apt-get install -fy sudo apt-get dist-upgrade But stuck with same error E: Internal Error, No file name for libc6 when do command sudo apt-get install -fy. And I've been looking on google, but have not been successful until now. Thanks.

    Read the article

  • Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video]

    - by ETC
    What happens if you try to upgrade a machine from MS-DOS to Windows 7? One curious geek ran the experiment using VMWare and recorded the whole, surprisingly fluid, ride for our enjoyment. Andrew Tait was curious, what would happen if you followed the entire upgrade arc for Windows from the 1980s to the present all on one machine? Thanks to VMWare he was able to find out, following the upgrade path all the way from MS-DOS to Windows 7. Check out the video below to see what happens: Chain of Fools: Upgrading Through Every Version of Windows [YouTube via WinRumors] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science] Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron

    Read the article

  • samba share not on network after upgrading to Ubuntu 12.04LTS.

    - by Sylvain Huard
    I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

    Read the article

  • Security Issue in LinkedIn &ndash; View any 3rd profile without a premium account.

    - by Shaurya Anand
    Originally posted on: http://geekswithblogs.net/shauryaanand/archive/2013/06/25/153230.aspxI discovered this accidently when my wife forwarded a contact on LinkedIn from her tablet, using the mobile interface of the website. On opening the contact on my desktop, I was surprised to see, I need to upgrade my account to view the contact. Doing some research along with my wife, I found this simple security vulnerability from LinkedIn that can let anyone view a contact’s full profile even when you have a “not upgraded” LinkedIn account and that the contact is a “3rd + Everyone Else”. Here’s an example of what I am talking about. I just made a random search on LinkedIn for a contact whose name starts with Sacha. Do note, this is just a walkthrough and I am not publicizing any Sacha. I check the “3rd + Everyone Else” and find a “LinkedIn Member”. On clicking this person’s profile to view, I am presented with the following page, asking me to upgrade. Make a note of this page’s web address and you get the profile id from it. For example, for this contact, the page address is: http://www.linkedin.com/profile/view?id=868XXX35 The Profile Id for this contact is 868XXX35. Now, open following page where the Profile Id is the same as the one we grabbed a moment earlier. https://touch.www.linkedin.com/?#profile/868XXX35 The mobile page exposes this contact information and you even get the possibility to connect to this person without an introduction mail (InMail). I hope someone from LinkedIn sees and issues a fix for this. I am pretty sure, it’s something that they don’t want the user to do without purchasing an upgrade package.

    Read the article

  • Doing a passable 4X game AI

    - by Extrakun
    I am coding a rather "simple" 4X game (if a 4X game can be simple). It's indie in scope, and I am wondering if there's anyway to come up with a passable AI without having me spending months coding on it. The game has three major decision making portions; spending of production points, spending of movement points and spending of tech points (basically there are 3 different 'currency', currency unspent at end of turn is not saved) Spend Production Points Upgrade a planet (increase its tech and production) Build ships (3 types) Move ships from planets to planets (costing Movement Points) Move to attack Move to fortify Research Tech (can partially research a tech i.e, as in Master of Orion) The plan for me right now is a brute force approach. There are basically 4 broad options for the player - Upgrade planet(s) to its his production and tech output Conquer as many planets as possible Secure as many planets as possible Get to a certain tech as soon as possible For each decision, I will iterate through the possible options and come up with a score; and then the AI will choose the decision with the highest score. Right now I have no idea how to 'mix decisions'. That is, for example, the AI wishes to upgrade and conquer planets at the same time. I suppose I can have another logic which do a brute force optimization on a combination of those 4 decisions.... At least, that's my plan if I can't think of anything better. Is there any faster way to make a passable AI? I don't need a very good one, to rival Deep Blue or such, just something that has the illusion of intelligence. This is my first time doing an AI on this scale, so I dare not try something too grand too. So far I have experiences with FSM, DFS, BFS and A*

    Read the article

  • The premier support for Sun Cluster 3.1 ended

    - by JuergenS
    In October 2011 the premier support for Sun Cluster 3.1 ended. See details in Oracle Lifetime Support Policy for Oracle and Sun System Software document. There no 'Extended Support' and the 'Sustaining Support Ends' is indefinite. But for indefinite 'Sustaining Support' I like to point out from the mentioned document (version Sept. 2011) on page 5: Sustaining Support does NOT include: * New program updates, fixes, security alerts, general maintenance releases, selected functionality releases and documentation updates or upgrade tools * Certification with most new third-party products/versions and most new Oracle products * 24 hour commitment and response guidelines for Severity 1 service requests *Previously released fixes or updates that Oracle no longer supports This means Solaris 10 9/10 update9 is the last qualified release for Sun Cluster 3.1. So, Sun Cluster 3.1 is not qualified on Solaris 10 8/11 Update10. Furthermore there is an issue around with SVM patch 145899-06 or higher. This SVM patch is part of Solaris 10 8/11 Update10. The 145899-06 is the first released patch of this number, therefore the support for Sun Cluster 3.1 ends with the previous SVM patches 144622-01 and 139967-02. For details about the known problem with SVM patch 145899-06 please refer to doc 1378828.1. Further this means you should freeze (no patching, no upgrade) your Sun Cluster 3.1 configuration not later than Solaris 10 9/10 update9. Or even better plan an upgrade to Solaris Cluster 3.3 now to get back to full support.

    Read the article

  • GPG Invalid Signature

    - by user46421
    I am having problems with the following (in an attempt to remove hyperlinks, I have removed one of the "/" from the addresses): W: GPG error: http://archive.ubuntu.com oneiric Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG B725097B3ACC3965 Launchpad lffl W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 4874D3686E80C6B7 Launchpad PPA for Banshee Team W: GPG error: http://archive.getdeb.net jaunty-getdeb Release: The following signatures were invalid: BADSIG A8A515F046D7E7CF GetDeb Archive Automatic Signing Key <[email protected]> W: GPG error: http://badgerports.org lucid Release: The following signatures were invalid: BADSIG C90F9CB90E1FAD0C Jo Shields <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 976B5901365C5CA1 Launchpad PPA for transmissionbt W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sevenmachines/flash/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found I have tried the following solutions which were in a closed case titled "The following signatures were invalid": First of all try sudo apt-get clean sudo apt-get update && sudo apt-get upgrade Some ISPs cache the packages and errors like these are reported then. If the above commands don't work, try sudo apt-get update -o Acquire::http::No-Cache=True and again sudo apt-get update && sudo apt-get upgrade If it still doesn't work, sudo apt-get update -o Acquire::BrokenProxy=true sudo apt-get update && sudo apt-get upgrade

    Read the article

  • Sun2Oracle: Upgrading from DSEE to the next generation Oracle Unified Directory

    - by Darin Pendergraft
    Mark your calendars and register to join this webcast featuring Steve Giovanetti from Hub City Media, Albert Wu from UCLA and our own Scott Bonnell as they discuss a directory upgrade project from Sun DSEE to Oracle Unified Directory. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Date: Thursday, September 13, 2012 Time: 10:00 AM Pacific Join us for this webcast and you will: Learn from one customer that has successfully upgraded to the new platform See what technology and business drivers influenced the upgrade Hear about the benefits of OUD’s elastic scalability and unparalleled performance Get additional information and resources for planning an upgrade Register Now!

    Read the article

  • Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

    - by Drachenviech
    I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

    Read the article

  • Upgrading to 12.10 on an external hard drive

    - by Tom Childers
    I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

    Read the article

  • Replication with AK8

    - by Steve Tunstall
    Hello folks, This came up today and I want to make sure it's clear. Remember the "deferred update" I spoke about in my "Upgrade to AK8" entry just a bit ago? It's important to understand that this deferred update changes the way replication works. It is necessary that systems with the deferred update applied only replicate with other systems that have also had this deferred update applied. So if you apply it, your system can NOT replicate with ANY other system that has NOT had it applied, even if that other system is running AK8!!! Got it??? Remember, we do have a new version of the 2011 code for the older systems that do not want to upgrade to AK8. This 2011.1.8 code ALSO HAS this same deferred update in it. So, if you upgrade your system to AK8, and then apply the deferred update, and you have another system running either 2011.1.8 or AK8, you can replicate with them again once they apply the deferred update for multiple initiator groups. Yes, even if you're not using LUNs. Here is what it looks like if you try. It will fail.

    Read the article

  • Rendering ASP.NET MVC Views to String

    - by Rick Strahl
    It's not uncommon in my applications that I require longish text output that does not have to be rendered into the HTTP output stream. The most common scenario I have for 'template driven' non-Web text is for emails of all sorts. Logon confirmations and verifications, email confirmations for things like orders, status updates or scheduler notifications - all of which require merged text output both within and sometimes outside of Web applications. On other occasions I also need to capture the output from certain views for logging purposes. Rather than creating text output in code, it's much nicer to use the rendering mechanism that ASP.NET MVC already provides by way of it's ViewEngines - using Razor or WebForms views - to render output to a string. This is nice because it uses the same familiar rendering mechanism that I already use for my HTTP output and it also solves the problem of where to store the templates for rendering this content in nothing more than perhaps a separate view folder. The good news is that ASP.NET MVC's rendering engine is much more modular than the full ASP.NET runtime engine which was a real pain in the butt to coerce into rendering output to string. With MVC the rendering engine has been separated out from core ASP.NET runtime, so it's actually a lot easier to get View output into a string. Getting View Output from within an MVC Application If you need to generate string output from an MVC and pass some model data to it, the process to capture this output is fairly straight forward and involves only a handful of lines of code. The catch is that this particular approach requires that you have an active ControllerContext that can be passed to the view. This means that the following approach is limited to access from within Controller methods. Here's a class that wraps the process and provides both instance and static methods to handle the rendering:/// <summary> /// Class that renders MVC views to a string using the /// standard MVC View Engine to render the view. /// /// Note: This class can only be used within MVC /// applications that have an active ControllerContext. /// </summary> public class ViewRenderer { /// <summary> /// Required Controller Context /// </summary> protected ControllerContext Context { get; set; } public ViewRenderer(ControllerContext controllerContext) { Context = controllerContext; } /// <summary> /// Renders a full MVC view to a string. Will render with the full MVC /// View engine including running _ViewStart and merging into _Layout /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to render the view with</param> /// <returns>String of the rendered view or null on error</returns> public string RenderView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, false); } /// <summary> /// Renders a partial MVC view to string. Use this method to render /// a partial view that doesn't merge with _Layout and doesn't fire /// _ViewStart. /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to pass to the viewRenderer</param> /// <returns>String of the rendered view or null on error</returns> public string RenderPartialView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, true); } public static string RenderView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderView(viewPath, model); } public static string RenderPartialView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderPartialView(viewPath, model); } protected string RenderViewToStringInternal(string viewPath, object model, bool partial = false) { // first find the ViewEngine for this view ViewEngineResult viewEngineResult = null; if (partial) viewEngineResult = ViewEngines.Engines.FindPartialView(Context, viewPath); else viewEngineResult = ViewEngines.Engines.FindView(Context, viewPath, null); if (viewEngineResult == null) throw new FileNotFoundException(Properties.Resources.ViewCouldNotBeFound); // get the view and attach the model to view data var view = viewEngineResult.View; Context.Controller.ViewData.Model = model; string result = null; using (var sw = new StringWriter()) { var ctx = new ViewContext(Context, view, Context.Controller.ViewData, Context.Controller.TempData, sw); view.Render(ctx, sw); result = sw.ToString(); } return result; } } The key is the RenderViewToStringInternal method. The method first tries to find the view to render based on its path which can either be in the current controller's view path or the shared view path using its simple name (PasswordRecovery) or alternately by its full virtual path (~/Views/Templates/PasswordRecovery.cshtml). This code should work both for Razor and WebForms views although I've only tried it with Razor Views. Note that WebForms Views might actually be better for plain text as Razor adds all sorts of white space into its output when there are code blocks in the template. The Web Forms engine provides more accurate rendering for raw text scenarios. Once a view engine is found the view to render can be retrieved. Views in MVC render based on data that comes off the controller like the ViewData which contains the model along with the actual ViewData and ViewBag. From the View and some of the Context data a ViewContext is created which is then used to render the view with. The View picks up the Model and other data from the ViewContext internally and processes the View the same it would be processed if it were to send its output into the HTTP output stream. The difference is that we can override the ViewContext's output stream which we provide and capture into a StringWriter(). After rendering completes the result holds the output string. If an error occurs the error behavior is similar what you see with regular MVC errors - you get a full yellow screen of death including the view error information with the line of error highlighted. It's your responsibility to handle the error - or let it bubble up to your regular Controller Error filter if you have one. To use the simple class you only need a single line of code if you call the static methods. Here's an example of some Controller code that is used to send a user notification to a customer via email in one of my applications:[HttpPost] public ActionResult ContactSeller(ContactSellerViewModel model) { InitializeViewModel(model); var entryBus = new busEntry(); var entry = entryBus.LoadByDisplayId(model.EntryId); if ( string.IsNullOrEmpty(model.Email) ) entryBus.ValidationErrors.Add("Email address can't be empty.","Email"); if ( string.IsNullOrEmpty(model.Message)) entryBus.ValidationErrors.Add("Message can't be empty.","Message"); model.EntryId = entry.DisplayId; model.EntryTitle = entry.Title; if (entryBus.ValidationErrors.Count > 0) { ErrorDisplay.AddMessages(entryBus.ValidationErrors); ErrorDisplay.ShowError("Please correct the following:"); } else { string message = ViewRenderer.RenderView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); string title = entry.Title + " (" + entry.DisplayId + ") - " + App.Configuration.ApplicationName; AppUtils.SendEmail(title, message, model.Email, entry.User.Email, false, false)) } return View(model); } Simple! The view in this case is just a plain MVC view and in this case it's a very simple plain text email message (edited for brevity here) that is created and sent off:@model ContactSellerViewModel @{ Layout = null; }re: @Model.EntryTitle @Model.ListingUrl @Model.Message ** SECURITY ADVISORY - AVOID SCAMS ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: @(App.Configuration.ApplicationBaseUrl)scams.html Obviously this is a very simple view (I edited out more from this page to keep it brief) -  but other template views are much more complex HTML documents or long messages that are occasionally updated and they are a perfect fit for Razor rendering. It even works with nested partial views and _layout pages. Partial Rendering Notice that I'm rendering a full View here. In the view I explicitly set the Layout=null to avoid pulling in _layout.cshtml for this view. This can also be controlled externally by calling the RenderPartial method instead: string message = ViewRenderer.RenderPartialView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); with this line of code no layout page (or _viewstart) will be loaded, so the output generated is just what's in the view. I find myself using Partials most of the time when rendering templates, since the target of templates usually tend to be emails or other HTML fragment like output, so the RenderPartialView() method is definitely useful to me. Rendering without a ControllerContext The preceding class is great when you're need template rendering from within MVC controller actions or anywhere where you have access to the request Controller. But if you don't have a controller context handy - maybe inside a utility function that is static, a non-Web application, or an operation that runs asynchronously in ASP.NET - which makes using the above code impossible. I haven't found a way to manually create a Controller context to provide the ViewContext() what it needs from outside of the MVC infrastructure. However, there are ways to accomplish this,  but they are a bit more complex. It's possible to host the RazorEngine on your own, which side steps all of the MVC framework and HTTP and just deals with the raw rendering engine. I wrote about this process in Hosting the Razor Engine in Non-Web Applications a long while back. It's quite a process to create a custom Razor engine and runtime, but it allows for all sorts of flexibility. There's also a RazorEngine CodePlex project that does something similar. I've been meaning to check out the latter but haven't gotten around to it since I have my own code to do this. The trick to hosting the RazorEngine to have it behave properly inside of an ASP.NET application and properly cache content so templates aren't constantly rebuild and reparsed. Anyway, in the same app as above I have one scenario where no ControllerContext is available: I have a background scheduler running inside of the app that fires on timed intervals. This process could be external but because it's lightweight we decided to fire it right inside of the ASP.NET app on a separate thread. In my app the code that renders these templates does something like this:var model = new SearchNotificationViewModel() { Entries = entries, Notification = notification, User = user }; // TODO: Need logging for errors sending string razorError = null; var result = AppUtils.RenderRazorTemplate("~/views/template/SearchNotificationTemplate.cshtml", model, razorError); which references a couple of helper functions that set up my RazorFolderHostContainer class:public static string RenderRazorTemplate(string virtualPath, object model,string errorMessage = null) { var razor = AppUtils.CreateRazorHost(); var path = virtualPath.Replace("~/", "").Replace("~", "").Replace("/", "\\"); var merged = razor.RenderTemplateToString(path, model); if (merged == null) errorMessage = razor.ErrorMessage; return merged; } /// <summary> /// Creates a RazorStringHostContainer and starts it /// Call .Stop() when you're done with it. /// /// This is a static instance /// </summary> /// <param name="virtualPath"></param> /// <param name="binBasePath"></param> /// <param name="forceLoad"></param> /// <returns></returns> public static RazorFolderHostContainer CreateRazorHost(string binBasePath = null, bool forceLoad = false) { if (binBasePath == null) { if (HttpContext.Current != null) binBasePath = HttpContext.Current.Server.MapPath("~/"); else binBasePath = AppDomain.CurrentDomain.BaseDirectory; } if (_RazorHost == null || forceLoad) { if (!binBasePath.EndsWith("\\")) binBasePath += "\\"; //var razor = new RazorStringHostContainer(); var razor = new RazorFolderHostContainer(); razor.TemplatePath = binBasePath; binBasePath += "bin\\"; razor.BaseBinaryFolder = binBasePath; razor.UseAppDomain = false; razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsBusiness.dll"); razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsWeb.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Utilities.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.Mvc.dll"); razor.ReferencedAssemblies.Add("System.Web.dll"); razor.ReferencedNamespaces.Add("System.Web"); razor.ReferencedNamespaces.Add("ClassifiedsBusiness"); razor.ReferencedNamespaces.Add("ClassifiedsWeb"); razor.ReferencedNamespaces.Add("Westwind.Web"); razor.ReferencedNamespaces.Add("Westwind.Utilities"); _RazorHost = razor; _RazorHost.Start(); //_RazorHost.Engine.Configuration.CompileToMemory = false; } return _RazorHost; } The RazorFolderHostContainer essentially is a full runtime that mimics a folder structure like a typical Web app does including caching semantics and compiling code only if code changes on disk. It maps a folder hierarchy to views using the ~/ path syntax. The host is then configured to add assemblies and namespaces. Unfortunately the engine is not exactly like MVC's Razor - the expression expansion and code execution are the same, but some of the support methods like sections, helpers etc. are not all there so templates have to be a bit simpler. There are other folder hosts provided as well to directly execute templates from strings (using RazorStringHostContainer). The following is an example of an HTML email template @inherits RazorHosting.RazorTemplateFolderHost <ClassifiedsWeb.SearchNotificationViewModel> <html> <head> <title>Search Notifications</title> <style> body { margin: 5px;font-family: Verdana, Arial; font-size: 10pt;} h3 { color: SteelBlue; } .entry-item { border-bottom: 1px solid grey; padding: 8px; margin-bottom: 5px; } </style> </head> <body> Hello @Model.User.Name,<br /> <p>Below are your Search Results for the search phrase:</p> <h3>@Model.Notification.SearchPhrase</h3> <small>since @TimeUtils.ShortDateString(Model.Notification.LastSearch)</small> <hr /> You can see that the syntax is a little different. Instead of the familiar @model header the raw Razor  @inherits tag is used to specify the template base class (which you can extend). I took a quick look through the feature set of RazorEngine on CodePlex (now Github I guess) and the template implementation they use is closer to MVC's razor but there are other differences. In the end don't expect exact behavior like MVC templates if you use an external Razor rendering engine. This is not what I would consider an ideal solution, but it works well enough for this project. My biggest concern is the overhead of hosting a second razor engine in a Web app and the fact that here the differences in template rendering between 'real' MVC Razor views and another RazorEngine really are noticeable. You win some, you lose some It's extremely nice to see that if you have a ControllerContext handy (which probably addresses 99% of Web app scenarios) rendering a view to string using the native MVC Razor engine is pretty simple. Kudos on making that happen - as it solves a problem I see in just about every Web application I work on. But it is a bummer that a ControllerContext is required to make this simple code work. It'd be really sweet if there was a way to render views without being so closely coupled to the ASP.NET or MVC infrastructure that requires a ControllerContext. Alternately it'd be nice to have a way for an MVC based application to create a minimal ControllerContext from scratch - maybe somebody's been down that path. I tried for a few hours to come up with a way to make that work but gave up in the soup of nested contexts (MVC/Controller/View/Http). I suspect going down this path would be similar to hosting the ASP.NET runtime requiring a WorkerRequest. Brrr…. The sad part is that it seems to me that a View should really not require much 'context' of any kind to render output to string. Yes there are a few things that clearly are required like paths to the virtual and possibly the disk paths to the root of the app, but beyond that view rendering should not require much. But, no such luck. For now custom RazorHosting seems to be the only way to make Razor rendering go outside of the MVC context… Resources Full ViewRenderer.cs source code from Westwind.Web.Mvc library Hosting the Razor Engine for Non-Web Applications RazorEngine on GitHub© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET   ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Visual Studio &amp; TFS &ndash; List of addins, extensions, patches and hotfixes &ndash; Latest and Greatest

    - by terje
    This post is a list of the addins and extensions we (I ) recommend for use in Inmeta.  It’s coming up all the time – what to install, where are the download sites, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 2010 connected to a Team Foundation Server 2010.  The edition of Visual Studio I use is the Ultimate Edition, but as many stay with the Premium Edition I’ve marked the extensions which only works with the Ultimate with a . I’ve also split the group into Recommended (which means Required) and Optional (which means Recommended) and Nice to Have (which means Optional) .   The focus is to get a setup which can be used for a complete coding experience for the whole ALM process.  The Code Gallery is found either through the Tools/Extension Manager menu in Visual Studio or through this link. The ones to really download is the Recommended category.  Then consider the Optional based on your needs.  The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column.     Product Available on Code Gallery Latest Version License Rec/Opt/N2H Applicable to Microsoft TFS Power Tools Sept 2010 Complete setup msi on link, split into parts on CG Sept 2010 Free Recommended TFS integration Yes Productivity Power Tools Yes 10.0.11019.3 Free Recommended Coding Yes Code Contracts No 1.4.30903 Free Recommended Coding & Quality Yes Code Contracts Editor Extensions Yes 1.4.30903 Free Recommended Coding & Quality Yes VSCommands Yes 3.6.4.1 Lite version Free (Good enough) Nice to have Coding No Power Commands Yes 1.0.2.3 Free Recommended Coding Yes FeaturePack 2   No.  MSDN Subscriber download under Visual Studio 2010 FP2 Part of MSDN Subscription Recommended Modeling & Testing Yes ReSharper No (Trial only) 5.1.1 Licensed Recommended Coding & Quality No dotTrace No 4.0.1 Licensed Optional Quality No NDepends No (Trial only) Licensed Optional Quality No tangible T4 editor Yes 1.950 Lite version Free (Good enough) Optional Coding (T4 templates) No Reflector No (Trial of Pro version only) 6.5 Lite version Free (Good enough) Recommended Coding/Investigation No LinqPad No 4.26.2 Licensed Nice to have Coding No Beyond Compare No 3.1.11 Licensed Recommended Coding/Investigation No Pex and Moles No (Moles available alone on CG) . Complete on MSDN Subscriber download under Visual Studio 2010 0.94.51023 Part of MSDN Subscription Optional Coding & Unit Testing Yes ApexSQL No Licensed Nice to have SQL No                 Some important Patches, upgrades and fixes Product Date Information Rec/Opt Applicable to Scrolling context menu KB2345133 and KB2413613 October 2010 Here Recommended Visual Studio MTM Patch October 2010 Here and here  KB2387011 Recommended (if you use MTM) MTM Data warehouse fix June 2010 Iteration dates fails with SQL 2008 R2.  KB2222312. Affects Burndown chart in Agile workbook Only for SQL 2008 R2 Server Upgrade 2008 to 2010 issue and hotfix August 2010 Fixes problems with labels and branches which are lost during upgrade. Apply before upgrade. Note: This has been fixed in the latest re-release of the TFS Server dated Aug 5th 2010. See here. Recommends downloading the latest bits. Only if upgrade from 2008 from earlier bits Server

    Read the article

  • Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 1

    - by shiju
    In this post, I will demonstrate web application development using ASP. NET MVC 3, Razor and EF code First. This post will also cover Dependency Injection using Unity 2.0 and generic Repository and Unit of Work for EF Code First. The following frameworks will be used for this step by step tutorial. ASP.NET MVC 3 EF Code First CTP 5 Unity 2.0 Define Domain Model Let’s create domain model for our simple web application Category class public class Category {     public int CategoryId { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public virtual ICollection<Expense> Expenses { get; set; } }   Expense class public class Expense {             public int ExpenseId { get; set; }            public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }     public int CategoryId { get; set; }     public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First.    public class MyFinanceContext : DbContext {     public MyFinanceContext() : base("MyFinance") { }     public DbSet<Category> Categories { get; set; }     public DbSet<Expense> Expenses { get; set; }         }   The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’.  If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class     {         void Add(T entity);         void Delete(T entity);         T GetById(long Id);         IEnumerable<T> All();     }   RepositoryBasse – Generic Repository class public abstract class RepositoryBase<T> where T : class { private MyFinanceContext database; private readonly IDbSet<T> dbset; protected RepositoryBase(IDatabaseFactory databaseFactory) {     DatabaseFactory = databaseFactory;     dbset = Database.Set<T>(); }   protected IDatabaseFactory DatabaseFactory {     get; private set; }   protected MyFinanceContext Database {     get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) {     dbset.Add(entity);            }        public virtual void Delete(T entity) {     dbset.Remove(entity); }   public virtual T GetById(long id) {     return dbset.Find(id); }   public virtual IEnumerable<T> All() {     return dbset.ToList(); } }   DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory {     private MyFinanceContext database;     public MyFinanceContext Get()     {         return database ?? (database = new MyFinanceContext());     }     protected override void DisposeCore()     {         if (database != null)             database.Dispose();     } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work   public interface IUnitOfWork {     void Commit(); }   UniOfWork class public class UnitOfWork : IUnitOfWork {     private readonly IDatabaseFactory databaseFactory;     private MyFinanceContext dataContext;       public UnitOfWork(IDatabaseFactory databaseFactory)     {         this.databaseFactory = databaseFactory;     }       protected MyFinanceContext DataContext     {         get { return dataContext ?? (dataContext = databaseFactory.Get()); }     }       public void Commit()     {         DataContext.Commit();     } }   The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class.   Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>.   public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository     {     public CategoryRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext.   public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable {     public override object GetValue()     {         return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName];     }     public override void RemoveValue()     {         HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName);     }     public override void SetValue(object newValue)     {         HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue;     }     public void Dispose()     {         RemoveValue();     } }   Let’s create controller factory for Unity in the ASP.NET MVC 3 application. public class UnityControllerFactory : DefaultControllerFactory { IUnityContainer container; public UnityControllerFactory(IUnityContainer container) {     this.container = container; } protected override IController GetControllerInstance(RequestContext reqContext, Type controllerType) {     IController controller;     if (controllerType == null)         throw new HttpException(                 404, String.Format(                     "The controller for path '{0}' could not be found" +     "or it does not implement IController.",                 reqContext.HttpContext.Request.Path));       if (!typeof(IController).IsAssignableFrom(controllerType))         throw new ArgumentException(                 string.Format(                     "Type requested is not a controller: {0}",                     controllerType.Name),                     "controllerType");     try     {         controller= container.Resolve(controllerType) as IController;     }     catch (Exception ex)     {         throw new InvalidOperationException(String.Format(                                 "Error resolving controller {0}",                                 controllerType.Name), ex);     }     return controller; }   }   Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies.   private void ConfigureUnity() {     //Create UnityContainer               IUnityContainer container = new UnityContainer()                 .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>())     .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>())     .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>());                 //Set container for Controller Factory                ControllerBuilder.Current.SetControllerFactory(             new UnityControllerFactory(container)); }   In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity.   protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     ConfigureUnity(); }   Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller   public class CategoryController : Controller {     private readonly ICategoryRepository categoryRepository;     private readonly IUnitOfWork unitOfWork;           public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork)     {         this.categoryRepository = categoryRepository;         this.unitOfWork = unitOfWork;     }       public ActionResult Index()     {         var categories = categoryRepository.All();         return View(categories);     }     [HttpGet]     public ActionResult Edit(int id)     {         var category = categoryRepository.GetById(id);         return View(category);     }       [HttpPost]     public ActionResult Edit(int id, FormCollection collection)     {         var category = categoryRepository.GetById(id);         if (TryUpdateModel(category))         {             unitOfWork.Commit();             return RedirectToAction("Index");         }         else return View(category);                 }       [HttpGet]     public ActionResult Create()     {         var category = new Category();         return View(category);     }           [HttpPost]     public ActionResult Create(Category category)     {         if (!ModelState.IsValid)         {             return View("Create", category);         }                     categoryRepository.Add(category);         unitOfWork.Commit();         return RedirectToAction("Index");     }       [HttpPost]     public ActionResult Delete(int  id)     {         var category = categoryRepository.GetById(id);         categoryRepository.Delete(category);         unitOfWork.Commit();         var categories = categoryRepository.All();         return PartialView("CategoryList", categories);       }        }   Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application.  Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category>      <table>         <tr>         <th>Actions</th>         <th>Name</th>          <th>Description</th>         </tr>     @foreach (var item in Model) {             <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" })                           </td>             <td>                 @item.Name             </td>             <td>                 @item.Description             </td>         </tr>          }       </table>     <p>         @Html.ActionLink("Create New", "Create")     </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList  Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{     ViewBag.Title = "Index"; }    <h2>Category List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script>    <div id="divCategoryList">               @Html.Partial("CategoryList", Model) </div>   We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Let’s create view page for insert Category information   @model MyFinance.Domain.Category   @{     ViewBag.Title = "Save"; }   <h2>Create</h2>   <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script>   @using (Html.BeginForm()) {     @Html.ValidationSummary(true)     <fieldset>         <legend>Category</legend>                @Html.EditorFor(model => model)               <p>             <input type="submit" value="Create" />         </p>     </fieldset> }   <div>     @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory  and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder.      @{     Layout = "~/Views/Shared/_Layout.cshtml"; }   Source Code You can download the source code from http://efmvc.codeplex.com/ . The source will be refactored on over time.   Summary In this post, we have created a simple web application using ASP.NET MVC 3 and EF Code First. We have discussed on technologies and practices such as ASP.NET MVC 3, Razor, EF Code First, Unity 2, generic Repository and Unit of Work. In my later posts, I will modify the application and will be discussed on more things. Stay tuned to my blog  for more posts on step by step application building.

    Read the article

  • How to remove window applet from Gnome3?

    - by Filip Nowak
    I installed today window applet for Gnome3 from this webupd8 post. The effect of the installation shown in the picture. I tried apt-get remove --purge and nothing happens. How do I remove this window applet? http://i.stack.imgur.com/D1s9b.jpg When i try metacity --replace &unity [1] 3171 Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : default Adding plugins Skipping upgrade com.canonical.unity.unity.01.upgrade Skipping upgrade com.canonical.unity.unity.02.upgrade Initializing core options...done Initializing bailer options...done Initializing detection options...done Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing move options...done Initializing vpswitch options...done Initializing gnomecompat options...done Initializing grid options...done Initializing mousepoll options...done Initializing place options...done Initializing resize options...done Initializing animation options...done Initializing wall options...done Initializing session options...done Initializing workarounds options...done Initializing wobbly options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done Initializing staticswitcher options...done Initializing fade options...done Initializing scale options...done Screen geometry changed: 0x0x1920x1080 Initializing unityshell options...done DEBUG 2012-02-19 21:22:40 glib <unknown>:0 Setting to primary screen rect: x=0 y=0 w=1920 h=1080 WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'bluefish.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'filezilla.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'gimp.desktop' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' Setting Update "texture_filter" Setting Update "sync_to_vblank" Setting Update "fullscreen_visual_bell" Setting Update "panel_opacity" Setting Update "launcher_opacity" Setting Update "icon_size" WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-available.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-installed.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu

    Read the article

  • Prepping the Raspberry Pi for Java Excellence (part 1)

    - by HecklerMark
    I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing. I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks: Load an OS onto an SD card Get the Pi connected to the network Load a JDK I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly. There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac): Plug SD card into reader on/in Mac Format it (FAT32) Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card) Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m) Eject the card from the Mac (diskutil eject diskn) There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi. Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one! Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least for my combination of Pi version, OS version, and uncanny gift of timing and luck there was. :-) Here is the sequence of steps I used to make the magic happen: Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity) Boot your Pi. On the first boot, do the following things: Opt to have it use all space on the SD card (will require a reboot eventually) Disable overscan Set your timezone Enable the ssh server Update raspi-config Reboot your Pi. This will reconfigure the SD to use all space (see above). After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved.  ;-) With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration. To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself! I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time! All the best, Mark 

    Read the article

  • .NET Security Part 2

    - by Simon Cooper
    So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

    Read the article

  • Java 6 Certified with Forms and Reports 10g for EBS 12

    - by John Abraham
    Java 6 is now certified with Oracle Application Server 10g Forms and Reports with Oracle E-Business Suite Release 12 (12.0.6, 12.1.1 and higher). What? Wasn't this already certified? No, but a little background might be useful in understanding why this is a new announcement. We previously certified the use of Java 6 with E-Business Suite Release 12 -- with the sole exception of Oracle Application Server 10g components in the E-Business Suite technology stack. Oracle Application Server 10g originally included Java 1.4.2 as part of its distribution.  E-Business Suite 12 uses, amongst other things, the Oracle Forms and Reports 10g components running on Java 1.4. Java 1.4 in the Oracle Application Server 10g ORACLE_HOME is used exclusively by AS 10g Forms and Reports' for Java functionality.  This version of Java is separate from the Java distribution used by other parts of EBS such as Oracle Containers for Java (OC4J). What's new about this certification? You can now upgrade the older Java 1.4 libraries used by Oracle Forms & Reports 10g to Java 6. This allows you to upgrade the Java releases within the Oracle Application Server 10g ORACLE_HOME to the the same level as the rest of your E-Business Suite technology stack components. Why upgrade? This becomes particularly important for customers as individual vendors' support lifecycle for Java 1.4 reaches End of Life: Oracle's Sun JDK Release 1.4.2's End of Extended Support: February 2013 (Sustaining Support indefinitely after) IBM SDK and JRE 1.4.2's End of Service: September 2013 HP-UX Java 1.4.2's End-of-Life : May 2012 Along with Oracle Forms, Java lies at the heart of the Oracle E-Business Suite.  Small improvements in Java can have significant effects on the performance and stability of the E-Business Suite.  As a notable side-benefit, later versions of Java have improved built-in and third-party tools for JVM performance monitoring and tuning.Our standing recommendation is that you always stay current with the latest available Java update provided by your operating system vendor.  Don't forget to upgrade Forms & Reports to 10.1.2.3 E-Business Suite 12 originally shipped with Oracle Application Server 10g Forms & Reports 10.1.2.0.2.  That version is no longer eligible for Error Correction Support. New Forms and Reports 10g patches are now being released with Forms and Reports 10.1.2.3 as the prerequisite. Forms and Reports 10.1.2.3 was certified for EBS 12 environments in November 2008. If you haven't upgraded your EBS 12 environment to Forms & Reports 10.1.2.3, this is a good opportunity to do so. References Using Latest Update of Java 6.0 with Oracle E-Business Suite Release 12 (My Oracle Support Document 455492.1) Overview of Using Java with Oracle E-Business Suite Release 12 (My Oracle Support Document 418664.1) Oracle Lifetime Support Policy (Oracle Fusion Middleware) IBM Developer Kit Lifecycle Dates HP-UX Java - End of Life Policy & Release Naming Terminology Related Articles OracleAS 10g Forms and Reports 10.1.2.3 Certified With EBS R12 Java 6 Certified with E-Business Suite Release 12

    Read the article

  • May I use full-texted feed for my News Reader app?

    - by Mahdi Ghiasi
    I'm creating a news reader app. (Users will choose sources, but not the exact feed addresses. for example, they can choose Gizmodo but they will not see the exact url of Gizmodo's feed) Some of sources are giving partial feeds, and user must go to their website to read the complete article. My question is, May I make a fulltext version of their feed (for example, using this service) and use it instead of their feed in my News reader categories? Am I legally/ethically allowed to do this? What about using some other service like Readability? (Readability gives HTML page instead of feed as input, but anyway, output will be clean article without any advertises or such) Please note that some of these partial feeds may have some advertises inside, but the fulltext feed generators usually remove that advertises.

    Read the article

  • Set up lnux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project The above upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Create a chroot jail to hold sftp user via rssh. This will force SCP/SFTP and will circumvent traditional FTP server setup. #cd /tmp #wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm #rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm #useradd -m -d /home/dev -s /usr/bin/rssh dev #passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. #vi /etc/rssh.conf Uncomment line allowscp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). Above instructions for SFTP appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • Oracle Announces Release of PeopleSoft HCM 9.1 Feature Pack 2

    - by Jay Zuckert
    Big things sometimes come in small packages.  Today Oracle announced the availability of PeopleSoft HCM 9.1 Feature Pack 2 which delivers a new HR self service user experience that fundamentally changes the way managers and employees interact with the HCM system.  Earlier this year we reviewed a number of new concept designs with our Customer Advisory Boards.  With the accelerated feature pack development cycle we have adopted, these innovations are  now available to all 9.1 customers without the need for an upgrade.   There are no new products that need to be licensed for the capabilities below. For more details on Feature Pack 2, please see the Oracle press release. Included in Feature Pack 2 is a new search-based menu-free navigation that allows managers to search for employees by name and take actions directly from the secure search results.  For example, a manager can now simply type in part of an employee’s first or last name and receive meaningful results from documents related to performance, compensation, learning, recruiting, career planning and more.   Delivered actions can be initiated directly from these search results and the actions are securely tied to HCM security and user role.  The feature pack also includes new pages that will enable managers to be more productive by aggregating key employee data into a single page.  The new Manager Dashboard and Talent Summary provide a consolidated view of data related to a manager’s team and individual team members, respectively.   The Manager Dashboard displays information relevant to their direct reports including team learning, objective alignment, alerts, and pending approvals requiring their attention.  The Talent Summary provides managers with an aggregated view of talent management-related data for an individual employee including performance history, salary history, succession options, total rewards, and competencies.   The information displayed in both the Manager Dashboard and Talent Summary is configurable by system administrators and can be personalized by each of your managers. Other Feature Pack 2 enhancements allow organizations to administer Matrix or Dotted-Line Relationship Management, which addresses the challenge of tracking and maintaining project-based organizations that cut across the enterprise and geographic regions.  From within the Company Directory and Org Viewer organization charts, managers now have access to manager self-service transactions from related actions.  More than 70 manager and employee self-service transactions have been tied into the related action framework accessible from Org Viewer, Manager Dashboard, Talent Summary and Secure Enterprise Search (SES) results.  In addition to making it easier to access manager self-service transactions, the feature pack delivers streamlined transaction pages making everyday tasks such as promoting an employee faster and more efficient. With the delivery of PeopleSoft HCM 9.1 Feature Pack 2, Oracle continues to deliver on its commitment to our PeopleSoft customers.  With this feature pack, HCM 9.1 customers will be able to deploy the newest functionality quickly, without a major release upgrade, and realize added value from their existing PeopleSoft investment.    For customers newly deploying 9.1, a new download with all of Feature Pack 2  will be available early next year.   This will aslo include recertified upgrade paths from 8.8, 8.9 and 9.0, for customers in the upgrade process.

    Read the article

  • How to discriminate commented code and documentation comments

    - by linquize
    After using version control tools, it is no longer necessary to comment out old code. However, some team members still comment out old code. Therefore, I want to clean them up. I want to mark commented lines which are really comments / documentation, so that every time I do not need to re-read all commented regions. The unmarked lines left are new commented code. How do I achieve this? Any existing tools or need to write on my own? Similar concept: in git, we have 'partial commit' to select some lines to commit. However, the lines marked in 'partial commit' is valid once only.

    Read the article

  • WebSocket API 1.1 released!

    - by Pavel Bucek
    Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue:  WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz   type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz   type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >