Search Results

Search found 8416 results on 337 pages for 'stop'.

Page 95/337 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• sudo make install: permission denied

  - by Wojtek Rzepala

  I have a most annoying question about building from sources. I've searched for an answer for a long while and nowhere can I find one... I've compiled software from sources before and this just baffled me. So I am trying to install python 2.7.2 from sources. I can do a successful ./configure, also make seems to run fine. But when I do sudo make install, I get a variety of errors... First, sudo make install gives me this: make: stat: GNUmakefile: Permission denied make: stat: makefile: Permission denied make: stat: Makefile: Permission denied make: stat: install: Permission denied make: *** No rule to make target `install'. Stop. So I did chmod +rx Makefile*. To no avail. Then, sudo ls . says ls: cannot access .: Permission denied Then ls -d . says the permissions are drwxr-x--- Then, as a desperate measure, chmod +rx .. That gave me: make: stat: Modules/config.c.in: Permission denied make: *** No rule to make target `Modules/config.c.in', needed by `Makefile'. Stop. So some progress... What is happening here? It looks like some sort of permission problem. I presumed that sudo would be the solution but clearly there is something else going on here... I tried sudo -s but I get those permission problems all over again... I am using Ubuntu 10.04LTS.

  Read the article

• Mapped networkdrive on logout

  - by Robuust

  I'm using a script to keep a mapped networkconnection alive, but ofcourse the mapped connection is gone when I logout. The point is now, that I'm running this on Windows Server 2008 R2, where I use remote desktop to login on the administrator account. However, it should remain logged in and not remove the mapped connection as this script takes care of not logging out on MS office 365 sharepoint. Is there a way to keep the mapped networklocation (L:) available after logout? So the script can run to remain the connection? # Create an IE Object and navigate to my SharePoint Site $ie = New-Object -ComObject InternetExplorer.Application $ie.navigate('https://xxx.sharepoint.com/') # Don't need the object anymore, so let's close it to free up some memory $ie.Quit() # Just in case there was a problem with the web client service # I am going to stop and start it, you could potentially remove this # part if you want. I like it just because it takes out a step of # troubleshooting if I'm having problems. Stop-Service WebClient Start-Service WebClient # We are going to set the $Drive variable here, this is just # going to tell the command what drive letter to map you can # change this to whatever you want (if you change it to a # drive that is already mapped it will overwrite it, so be careful. $Drive = "L:" # You can change the drive destiniation to whatever you want, # it has to be a document library or folder of course. $DrvDest = "https://xxx.sharepoint.com/files/" # Here is where we create the object to map the network drive and # then map the network drive $net = New-Object -ComObject WScript.Network; $net.mapnetworkdrive($Drive,$DrvDest) # That is the end of the script, now schedule this with task # scheduler and every so often and you should be set.

  Read the article

• Usage of putty in command line from Hudson

  - by kij

  Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

  Read the article

• Vista gets stuck in an endless loop while booting

  - by Mason Wheeler

  I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

  Read the article

• Adobe Reader Wants Sensitive Email Details

  - by KDM

  When I run Adobe Reader, it tells me: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client. I have a couple of issues with this: 1) It presupposes everyone has Microsoft Office installed. Not all home users have the budget or inclination for this. 2) It presupposes everyone wants Microsoft Outlook to be their default mail client. 3) I have Microsoft Office (incl. Outlook) installed and set as my default mail client. Even if I make it the default mail client from within the Adobe Reader Preferences, that doesn't stop the dialog appearing. 4) I thought I'd give Adobe Reader a new email address in the preferences, just to get it to stop bugging me. I notice, though, that it want's the SMTP and POP addresses and the account password? They have got to be kidding? I just want to view PDF files. How do I get the message to go away without telling Adobe my life story, giving them my mother's maiden name, my favourite movie, my place of birth, the name of my first goldfish and emptying the contents of my wallet for them?

  Read the article

• ntpd on Fedora Core 6 with high negative time reset values

  - by Mark White

  The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

  Read the article

• Name one good reason for immediately failing on a SMTP 4xx code

  - by Avery Payne

  I'm really curious about this. The question (highlighed in bold): Can someone name ONE GOOD REASON to have their email server permanently set up to auto-fail/immediate-fail on 4xx codes? Because frankly, it sounds like "their" setups are broken out-of-the-box. SMTP is not Instant Messaging. Stop treating it like IRC or Jabber or MSN or insert-IM-technology-here. I don't know what possesses people to have the "IMMEDIATE DELIVERY OR FAIL" mentality with SMTP setups, but they need to stop doing that. It just plain breaks things. Every two or three years, I stumble into this. Someone, somewhere, has decided in their infinite wisdom that 4xx codes are immediate failures, and suddenly its OMGWTFBBQ THE INTARNETZ ARE BORKEN, HALP SKY IS FALLING instead of "oh, it'll re-attempt delivery in about 30 minutes". It amazes me how it suddenly becomes "my" problem that a message won't go through, because someone else misconfigured "their" SMTP service. IF there is a legitimate reason for having your server permanently set up in this manner, then the first good answer will get the check. IF there is no good reason (and I suspect there isn't), then the first good-sounding-if-still-logically-flawed answer will get the check.

  Read the article

• Rsyslogd not listening on port

  - by amorfis

  I installed rsyslogd on ubuntu server, started it and everything looks fine, but the port the server should listen on is not opened. ubuntu@node7:~$ sudo service rsyslog restart rsyslog stop/waiting rsyslog start/running, process 14114 Netstat shows it is not listening: ubuntu@node7:~$ netstat -tlan Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 320 172.22.0.17:22 10.8.8.38:61335 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 :::2776 :::* LISTEN tcp6 0 0 :::2777 :::* LISTEN tcp6 0 0 172.22.0.17:2777 172.22.0.11:56554 ESTABLISHED tcp6 0 0 172.22.0.17:2776 172.22.0.11:39780 ESTABLISHED This is how /etc/rsyslog.conf looks like (most comments omitted): ubuntu@node7:~$ cat /etc/rsyslog.conf ################# #### MODULES #### ################# $ModLoad imuxsock # provides support for local system logging $ModLoad imklog # provides kernel logging support (previously done by rklogd) $ModLoad imtcp $InputTCPServerRun 514 ########################### #### GLOBAL DIRECTIVES #### ########################### $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $RepeatedMsgReduction on $WorkDirectory /var/spool/rsyslog $FileOwner syslog $FileGroup adm $FileCreateMode 0640 $DirCreateMode 0755 $Umask 0022 $PrivDropToUser syslog $PrivDropToGroup adm $IncludeConfig /etc/rsyslog.d/*.conf In /etc/rsyslog.d/35-server-per-host.conf I have following lines, and I suspect this can be the cause. What does it mean? # Stop processing of all non-local messages. You can process remote messages # on levels less than 35. :fromhost-ip,!isequal,"127.0.0.1" ~ and if it is, how could I change it to have server listening and receiving and logging messages? UPDATE: I commented out suspected line, but still it's not listening on port 514

  Read the article

• What permission(s) does an application pool identity required to manage other application pools?

  - by Mr Shoubs

  I have a web site (used to manage various parts of our software) that needs the permissions required to start/stop other application pools. I've created a user and set the app pool identity to custom, however the web app still can't start/stop the app pools. I get the following Error: System.UnauthorizedAccessException: Filename: redirection.config Error: Cannot read configuration file due to insufficient permissions at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Administration.ServerManager.get_ApplicationPoolsSection() at Microsoft.Web.Administration.ServerManager.get_ApplicationPools() Discussion here suggests setting the application pool to local system or administrator, this does work, but I don't want to do this for security reasons (external support will need access this site). I did give the user higher permissions (as suggested here), starting by making it part of the local administrators group, but initially this didn't work, and giving the user read/write/mod permission on C:\Windows\System32\inetsrv\config also didn't work. I must have done something wrong as local administrator now works, however this still isn't what I want. So can anyone suggest the permissions I need to add to this user, and how can I apply them? An answer my problem (but different question) is here, but to clarify, I think I need to give an individual user "IIS Runtime Operation Permissions", does anyone know how to do this, if indeed this is the permissions I require?

  Read the article

• Apache2.2 not responding on Windows 7 desktop

  - by Adam

  Afternoon! I'm having some trouble with Apache2.2 on Windows 7. For over a year it's been running no problem, but all of a sudden requests have just stopped responding. They don't ever time out, the browser just keeps on waiting for a response, which makes me think it's something blocking communication with Apache. Interestingly though, if I stop Apache the requests fail immediately. The Apache service is running, and using netstat I can see it listening on port 80 as configured: TCP 127.0.0.1:80 0.0.0.0:0 LISTENING If I stop the Apache service, that line disappears. I have an entry within my hosts file for each VHost I'm trying, all pointing to 127.0.0.1. Each VHost is configured to *:80. Nothing however is getting recorded in the access or error (at debug level) log files. I've verified the file paths are correct, even though they were never changed. Neither is anything getting recorded within Windows' Event Log. The problem showed up when I added a new VHost and restarted, however I hadn't been using it for a couple of days prior so I don't believe it's the config change. I have performed a syntax check to be sure, and when starting from the command prompt no errors are reported there. I do have Windows Firewall running, however I've verified the Apache rule is correct and tried turning it off to ensure that wasn't the problem. I've reinstalled Apache, in the hope it might magically fix something using the default config, but still no joy. I've also tried using a different port. I'm completely lost for ideas now. Can anybody help? Cheers Adam

  Read the article

• Painfully slow login to AD bound Mac OS X Leopard machine when off home network

  - by GeeBee

  Dear all Just looking for a little help with this problem that seems to trip a lot of people up and is causing me no end of grief. I have a number of fully patched OS X Leopard machines that are bound to my AD (Server 2003). When on the home network, logging in seems swift and works as expected. When users take the machines off site, login can take 5 minutes or more. The user adds correct credentials but the desktop does not appear for a very long time. Outside the office, I have tried logging in using a local Admin account, switching off Airport and then logging in using an AD account. In this situation login is immediate again. It all seems as if Leopard is finding a suitable wireless network, spending far too long looking for the Domain before eventually giving up and using the cached credentials instead. I have read that disabling Bonjour on the machine will stop this problem (i have not yet tested) http://www.macwindows.com/leopardAD.html#111607z ...but I am reluctant to use this "Solution" as I would like to be able to use Bonjour on the local network as well as having AD-bound machines. However, is disabling Bonjour really the only answer? Is there not some time-out setting somewhere that could be amended to stop Leopard spending forever looking for home? Any help would be very gratefully received Thanks Gordon

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• Restarting shell script with &disown using Monit

  - by Solas Admin

  I have a shell script that runs a C++ backend mail system (PluginHandler). I need to monitor this process in Monit and restart it if it fails. The script: export LD_LIBRARY_PATH=/usr/local/lib/:/CONFIDENTAL/CONFIDENTAL/Common/ cd PluginHandler/ ./PluginHandler This script does not have a PID file and we run this script by executing ./rundaemon.sh &disown ./pluginhandler starts the process and starts logging into /etc/output/output.log I stop the process by identifying the process ID with [ps -f | grep PluginHandler] and then killing the process. I can check the process in Monit just fine, but I think Monit is starting the process if it is not running but it can't do &disown so the process ends as soon as it starts. This is the code in the monitrc file for checking this process: check process Backend matching "PluginHandler" if not exist then alert start "PATH/TO/SCRIPT/rundaemon.sh &disown" alert [email protected] only on {timeout} with mail-format {subject: "[BLAH"} I tried to stop the script from terminating by modifying the script like the following but this does not work either. export LD_LIBRARY_PATH=/usr/local/lib/:/home/CONFIDENTAL/production/CONFIDENTAL/Common/ cd PluginHandler/ (nohup ./PluginHandler &) return Any help to write a proper Monit rules to resolve this issue would be greatly appreciated :)

  Read the article

• Why do messenger keeps coming up when I adjust screen brightness?

  - by Asaf R

  My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

  Read the article

• How to use Timer broadcast on Multi-Processor system with linux 3.10?

  - by kevin.ji

  Hardware: ARM Cortex-A9 * 2 Software: linux-3.10.0 The platform has 2 cores of arm cortex-a9. Item CONFIG_LOCAL_TIMERS is not set in linux menuconfig. I want to use only one hardware timer to supply tick for all cpu. Interrupts looks like: CPU0 CPU1 57: 6697 0 GIC timer 81: 213 0 GIC uart-pl011 103: 0 0 GIC gmac0 104: 0 0 GIC gmac1 IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 967 866 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 1 2 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 CPU backtrace Err: 0 Timer broadcast interrupts counter does not add. And it looks like that cpu1 does not work at all.But this method works well with linux-3.4, and the interrupt info looks as below in linux-3.4: # cat /proc/interrupts CPU0 CPU1 57: 8596 0 GIC timer 81: 91 0 GIC uart-pl011 103: 0 0 GIC gmac0 104: 0 0 GIC gmac1 IPI0: 0 8560 Timer broadcast interrupts IPI1: 884 1020 Rescheduling interrupts IPI2: 0 0 Function call interrupts IPI3: 0 6 Single function call interrupts IPI4: 0 0 CPU stop interrupts IPI5: 0 0 CPU backtrace Err: 0 The count of Timer broadcast interrupts is adding. And all of cpus work well. I don't know why. Any answer is welcome. :)

  Read the article

• Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

  - by Bryce Thomas

  I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

  Read the article

• init.d script runs correctly but process doesn't live when booted fully up

  - by thetrompf

  I have a problem with an init.d script #!/bin/bash ES_HOME="/var/es/current" PID=$(ps ax | grep elasticsearch | grep $ES_HOME | grep -v grep | awk '{print $1}') #echo $PID #exit 0 case "$1" in start) if [ -z "$PID" ]; then echo "Starting Elasticsearch" echo "Starting Elasticsearch" /var/tmp/elasticsearch su -m elasticsearch -c "${ES_HOME}/bin/elasticsearch" exit 0; else echo "Elasticsearch already running" echo "Elasticsearch already running" /var/tmp/elasticsearch exit 0; fi ;; stop) if [ -n "$PID" ]; then echo "Stopping Elasticsearch" kill ${PID} echo "Stopped Elasticsearch" exit 0; else echo "Elasticsearch is not running" exit 0; fi ;; esac The scripts runs just file, as I can see in /var/tmp/elasticsearch a new line is added after every boot, but if I run: /etc/init.d/elasticsearch stop Just after the server is booted, I get "Elasticsearch is not running", ergo somehow the process does not stay alive. My question is why? and what am I doing wrong? Thanks in advance.

  Read the article

• maximum number of connections Squid

  - by Isaac

  I have a Squid proxy server that controls all internet traffic for my network. I need a way to stop users from downloading big files (say 50MB) in my network. I banned some famous ports (e.g. torrent) but some downloads are possible by HTTP port. Obviously I cannot ban port 80! A simple solution is limiting maxmimum number of the simultaneous connections for each IP (e.g. 3 connections). It's possible in Squid with this config: acl ACCOUNTSDEPT 192.168.5.0/24 acl limitusercon maxconn 3 http_access deny ACCOUNTSDEPT limitusercon But this solution has really bad impact in web browsing, because any smart browser get different parts of a website by several connections simultaneously to speedup web browsing. But if we have a maximum number of connections, the browsers will fail to get some parts and the website will be shown partially and some parts/images/frames will not be shown. So, can we limit maximum number of persist connections? I think this policy will works: Specify Maximum number of connections that is alive for 10 seconds But Number of simultaneous connections for every IP is unlimited But how can we implement this policy when Squid? With which config? UPDATE: artifex and Tom Newton offered using a bandwidth-limiting approach to fight against downloaders. But bandwidth-limiting in Squid has a shortcoming: It's static and cannot dynamically change. So a person has a limited bandwidth not matter how many people are using internet (maybe nobody!) Also, this solution cannot help to stop people from downloading. They still can download but in a lower speed. But if we find a way to terminate persist connections (or any connection that is alive more than a specific time), downloading big files will be almost impossible (always there is some way!)

  Read the article

• Some process/service/driver repeatedly presses F5

  - by VitalyB

  Hi everyone, I have the strangest problem that started 2 days ago (Windows7, 64bit). SOMETHING causes my F5 key to be constantly pressed. Rebooting helps, but only for a while, it keeps coming back to that. So far I've tried to disconnect and reconnect the keyboard (physically), however, disconnecting the keyboard doesn't actually do anything. Reconnecting it back again, causes the F5-pressing to stop, but not for very long (seconds/minutes). I'd really like to avoid a binary search for the programs (process closing/keyboard switching/etc) before I can, at the very least, identify the source of the keypress. Is there an application that can show me what is causing a key press? E.g is it the keyboard driver, or some process that executes SendKey repeatedly for reasons unknown. Thanks! P.S FYI, having F5 causes the strangest side effects. Task Manager refreshes very very quickly (as F5 is refresh), the desktop is constantly flickering and all the browsers stop working as they keep trying to refresh. I was lucky to find out what the heck is happening only because I started notepad and saw that current date/time started to appear constantly. If not that, I'd still be wondering.

  Read the article

• MySQL Master - Master Broken

  - by Recc

  I've Inherited a Mysql master master system, I've noticed the second master (lets call it slave from now on as it's running on a 'slave' machine) stopped getting its db's updated. I saw that Master: Slave_IO_Running: Yes Slave_SQL_Running: Yes Slave: (with an error I truncated) Slave_IO_Running: Yes Slave_SQL_Running: No Last_Errno: 1062 Last_Error: Error 'Duplicate entry '3' for key 'PRIMARY'' on [...] I don't know what caused it to process considering we cant get duplicate there. What's important is to resume normal operations; Right now I've stop slave; on the Master and stop slave; on the Slave because I saw that if I change records on the Slave the changes Do Get Propagated to Master which is in active use. How do I: Force sync EVERYTHING from master to slave without affecting data on master? Then hopefully have slave pickup replication as usual? UPDATE OK I Tried deleting all tables on slave then it complained in that error section that the 'table' doesnt exist. So i made a no data dump of Master, and made sure I have only empty tables in Secondary (slave). I start slave; on slave BUT now it's complaining about bloody alter table statements for instance: Last_Errno: 1060 Last_Error: Error 'Duplicate column name [...] Query: 'ALTER TABLE [...] How to skip the fracking alter statements I just want to replicate the bloody data and be done with it, my tables have the lates changes already FFS and now its complaining about changes made after the replication seized weeks ago How do I reset the log or something? OUTSTANDING Why would this start happening? The "Secondary" is propagating to "Primary". "Primary" is not propagating to "Secondary". But any fixes I tried to do left it in the same state Yes-Yes Yes-No with same Last_Error. I think around that time the server was taken off the network, could that confuse MySQL in some way?

  Read the article

• Outlook 2007 message formatting - pasted images

  - by Jack

  When you cut and past an image into a message window when composing a new email, the image will display as you would expect and formatting the image appears straight forward, However the pain happens when you click send. The recipient notices that the image will resize with the size of there outlook window. The original image size is ignored and no scrollbars appear. Howe do you stop this behaviour. When said image is pasted, say you want to place a graphic on top of the image such as an arrow. By using the ribbon, selecting the insert tab and choosing shapes, you go ahead and select the arrow shape and plonk it on to of the image, just where you want it, give it a nice colour and then send the email. As the recipient resizes there outlook message window, the image resizes but the shape remains where it was, now who wants that micros*a*ft! So, how do you A) make the shape resize with the image, so the shape stays where I put it in relation to the image, and b) stop the image resizing in the first place.

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). [mymacaddress]/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) It's being logged every hour. I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. There are some tunable SCTP parameters but it's not something I'm familiar with. Do I have to add changes to /etc/system? Looks like sctp_heartbeat_interval might be what I need to change? If it makes any difference, I have a few solaris zones running on this server, each with their own IP address on a virtual interface. eth0:0, eth0:1, etc. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else? Update: This was happening more frequently but now it seems to be happening roughly every hour or every two hours. It's not consistent. I tried setting setting the link speed and duplex to match the switch port and that seemed to make it stop happening for a few hours but then it started again.

  Read the article

• EC2: is an instance's public DNS stable? Can I rely on it not changing?

  - by Aseem Kishore

  I'm new to Amazon EC2. I've launched my first instance, and am using it as a web server. I see that it has a public DNS (a public URL), e.g.: ec2-123-45-6-789.compute-1.amazonaws.com I can successfully go to this server in my browser, hit it via cURL, etc. I want to use this web server for a back-end service in an app I'm building, so I placed this URL in my app's config, and it works great. But when I manually stop and re-started my instance, I see that the public DNS changes! I've read that this happens when you explicitly stop and re-start, but doesn't happen if you just "reboot". I don't plan on explicitly stopping and re-starting this server ever, but my question is: will this public DNS ever change on its own for any reason? E.g. if the machine abnormally crashes, or whatever. In other words, is it safe to ship an app that's wired to this URL? Thanks!

  Read the article

• Exchange 2010 sends out spam.

  - by Magnus Gladh

  Hi. I have an Exchange Server 2010, that uses a smart host to send out mails. A day ago the owner of smart host contact us and told us that we send out spam. I have try different open relay test on the net and all of them come back saying that this server is secured and can not be used as relay server. But I can see in my Exchange Queue Viewer that it keeps coming in new messages. Here is an example of how it looks. Identity: mailserver\3874\13128 Subject: Olevererbart:: [email protected] Pfizer -75% now Internet Message ID: <[email protected]> From Address: <> Status: Ready Size (KB): 6 Message Source Name: DSN Source IP: 255.255.255.255 SCL: -1 Date Received: 2010-12-09 21:46:22 Expiration Time: 2010-12-11 21:46:22 Last Error: Queue ID: mailserver\3874 Recipients: [email protected] How can I secure our exchange server more, to stop this from happening? Could I have got an virus that hooks up to our exchange server and send mail throw that? As I can see the From Address is always <, is there someway that I can stop sending mails that don't have a from address that I describe? Pleas help

  Read the article

• Connect to WEP Wireless Network by command line on Ubuntu

  - by Tim

  Hi, I am a newbie to both network and Linux. I am now trying to connect to a WEP wireless network by command line on my Ubuntu 8.10, because the Network Manager does not support 64 bit WEP. (1) I firstly bring down the Network Manager and then try to connect to a wireless network, whose essid is candy and password is 5673212741. But it fails as shown in the following. I wonder why and how to do it correctly? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwconfig wlan0 essid candy opendo iwconfig wlan0 key 18018ce78e open $ sudo iwconfig wlan0 key 5673212741 open $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 9971 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. $ ping www.bbc.co.uk ping: unknown host www.bbc.co.uk (2) A less important question: why the scan for wireless networ does not work after I bring down the Network Manager? $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning : Network is down Thanks and regards!

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >