Search Results

Search found 4065 results on 163 pages for 'unknown fool'.

Page 95/163 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Is looking for Wi-Fi access points purely passive?

  - by Aric TenEyck

  Say I carry a Wi-Fi enabled phone or laptop through an area where there are WAPs. Assuming that I don't actively try to connect to them or otherwise interact with them, is it possible for the owner of that WAP to know that I was there? I'm asking this in the context of my earlier question: Looking for MACs on the network I was talking with a friend about my newfound ability to detect phones (and other devices with MAC addresses) on the network, and he pointed out that it might be useful to detect unknown phones on the network; I could use that data to track down anyone who was in my house and brought a Wi-Fi phone with them. So, if I set up a logging fake WAP with no security or encryption, can I glean any useful information about the devices that come into the house? Assuming that the thief doesn't actively try to connect...

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• Postfix not receiving non-local mail

  - by Davis Sorenson

  I set up a server with Postfix/Dovecot on Linode/Ubuntu 10.04 according to this guide, admittedly I've never done this before. Local mail works just fine, but trying to send email to it from external addresses results in errors like this: Delivery to the following recipient failed permanently: <address>@ni-mate.com Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 553 553 Unknown recipient. (state 13). I honestly have no idea what to do or which configuration files/logs anyone needs to see.

  Read the article

• Prevent Windows 7 from unpluging External HDD [migrated]

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• How can I change shell in Ubuntu?

  - by Sanoj

  I have a Ubuntu Server VPS and I want to use /bin/bash/ as my shell. How can I change my shell? I have root access but I don't work as root. So dash is my default shell now. I have read How do I make Bash my default shell on Ubuntu? and chsh seams to be the preferred way to go. But when I type chsh /bin/bash I get this message: chsh: unknown user /bin/bash And if I just type /bin/bash the Bash shell seams to work fine. How to change it?

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• mysql -e option with variable data - Pass the variable value to insert sql statement in shell script

  - by Ahn

  The following shell script is not inserting the data to the table. How to pass the variable value to insert sql statement in a shell script. id=0 while true do id=`expr $id + 1`; mysql -u root -ptest --socket=/data/mysql1/mysql.sock -e 'insert into mytest1.mytable2(id,name) values (' $id ',"testing");' echo $id >> id.txt done I have modified the script as below and tried, and still having the issue id=0 while true do id=`expr $id + 1`; # mysql -u root -ptest --socket=/data/mysql1/mysql.sock1 -e 'insert into mytest1.mytable1(name) values ("amma");' mysql -u root -ptest --socket=/data/mysql1/mysql.sock -e 'insert into mytest1.mytable2(id,name) values ( $id ,"testing");' echo $id >> id.txt done error : ]$ ./insert ERROR 1054 (42S22) at line 1: Unknown column '$id' in 'field list'

  Read the article

• Ubuntu 6.06 Boot problem

  - by nijikunai

  I tried to boot my pc using ubuntu 6.06 in the live cd mode but it refuses to boot. It throws the error Uncompressing Linux.. ok, booting from kernel [ 54.168828] ACPI Unable to load the System Descriptor Tables The live cd works perfectly okay in other computers. Out of curiosity, I also tried to boot using Slax live cd, It too threw some errors incomplete literal tree invalid compressed format (err=1) UDF-fs: No partition found (1) XFS: bade magic number XFS: SB validate failed Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) The slax errors are a bit worrying to me. Thanks for the help in advance!

  Read the article

• Why does Postfix deliver mails locally instead of relaying them to Google Apps?

  - by user40388

  I get the following error trying to send an email to my Google Apps Email at [email protected] from my Postfix server. to=, relay=local, delay=0.09, delays=0.07/0/0/0.02, dsn=5.1.1, status=bounced (unknown user: "admin") Is there a way I can force it to not use the LOCAL relay and treat [email protected] as outside email and not look for a user in the current postfix configuration. I am trying to email the full email address "[email protected]" not only "admin". I have the Google Apps MX record on mydomain.com + SPF record which before was: v=spf1 include:_spf.google.com ~all (emailing to [email protected] used to work with that record) But I had to change it to v=spf1 a mx ip4:MY.IP.HERE include:_spf.google.com ~all

  Read the article

• How do you interpret `strace` on an apache process returning `restart_syscall`?

  - by indiehacker

  We restart an apache server every day because RAM usage reaches its limit. Though of value See this serverfault answer, I dont think lowering the MaxClients in the apache configuration is a solution to the unknown root problem. Can you make sense out of the below data? Below is an extract of what $top with M returns: 20839 www-data 20 0 1008m 359m 22m S 4 4.8 1:52.61 apache2 20844 www-data 20 0 1008m 358m 22m S 1 4.8 1:51.85 apache2 20842 www-data 20 0 1008m 356m 22m S 1 4.8 1:54.60 apache2 20845 www-data 20 0 944m 353m 22m S 0 4.7 1:51.80 apache2 and then investigating a single process with $sudo strace -p 20839 returns only this one line, which is cryptic, for me: restart_syscall(<... resuming interrupted call ...> <unfinished ...> Any insights? Thanks.

  Read the article

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• How do i restore default font settings in windows Vista

  - by user45556

  Hi guys, I am here with a problem to restore the font setting of my vista. I am using Windows Vista and due to unknown reasons my font settings have been changed to ugly font. I used to get clear fonts previously but all of sudden the fonts have become blur and font name has also changed. all windows programs showing default fonts have been changed. I dun know which is the true font of windows vista and from where to restore. I tried using color and apperance but it didn't worked... so what can be done?

  Read the article

• How do i restore default font settings in windows Vista

  - by user45556

  Hi guys, I am here with a problem to restore the font setting of my vista. I am using Windows Vista and due to unknown reasons my font settings have been changed to ugly font. I used to get clear fonts previously but all of sudden the fonts have become blur and font name has also changed. all windows programs showing default fonts have been changed. I dun know which is the true font of windows vista and from where to restore. I tried using color and apperance but it didn't worked... so what can be done?

  Read the article

• Using systeminfo to get the OS Name

  - by WileCau

  I need to find the flavor of Windows that is running using a batch file that will run on anything from Windows NT to Windows 7. I'm using a method based on this page with some minor changes. Systeminfo gives the flavor of Windows that is running. Is there any authoritative list of names that can be returned? If so where would I find the list? My intention is to do something like: winVer=Unknown rem NT doesn't have systeminfo ver | find "Windows NT" > nul if %errorlevel%==0 set winVer=WinNT for /f "delims=: tokens=2" %%v in ('sysinfo ^| find "OS Name"') do ( set verStr=%%v ) echo %verStr% | find "Windows XP" > nul if %errorlevel%==0 set winVer=WinXP echo %verStr% | find "Windows Vista" > nul if %errorlevel%==0 set winVer=WinVista ... etc Thanks

  Read the article

• Disable CTRL + ALT + [LETTER] to produce accented variations

  - by Barney

  After an unknown config change, CTRL + ALT + [LETTER] has started producing common accented versions of [LETTER]. I'm not a big fan of this arrangement, seeing as I've memorized all my favourite ALT + [NUMPAD SEQUENCE] references and was used to using CTRL + ALT + [LETTER] for various other application-specific commands in my text editor. The prominent result from my searching suggests that this has something to do with a switch to an 'international keyboard', and says this can be removed in the control panel or toggled by hitting ALT + SHIFT, but I can't get my system to confirm this, and the solutions (or close approximations thereof) don't work. Specifically, I've been to Control Panel\Clock, Language, and Region\Language\Advanced settings and switched the override for default input method from 'language list' to English and I've been to Control Panel\Clock, Language, and Region\Language\Language options and made sure that I only have my one input method (UK). Other than that I'm not quite sure where to look. Any ideas?

  Read the article

• How can I prevent my computer from waking up accidentally?

  - by Ivo Flipse

  When I put my computer into sleep mode, it will wake up while I'm away from it. There's nothing near the computer that could move the mouse or accidentally press a button and I have no idea what might be causing it. I tried checking what woke it, apparently LASTWAKE only tells me that it has been in sleep mode, not what woke it up. I also couldn't find anything in my Power Options regarding Sleep that seems off. Poking around in the Event Viewer I notice the following: The Power-Troubleshooter event at the top notes the following: The system has returned from a low power state. Sleep Time: ?2012?-?10?-?27T11:31:53.408927000Z Wake Time: ?2012?-?10?-?27T12:25:51.887029300Z Wake Source: Unknown So does anyone have an idea to find out what might be causing it and how I can prevent my computer from randomly waking up?

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• smbclient -L host works. ping host doesn't work. What is missing

  - by DrorCohen

  I upgrade my ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's netbios name. I get "Unknown Host". However running smbclient -l HostName - give me all the output in the world. Stracing the ping I can it tries to use resolv.conf (expected fail) and then when accessing mdns stuff it fails (no mdns.allow file) and exits. Here's the host line from /etc/nsswitch.conf: hosts: files wins mdns4_minimal [NOTFOUND=return] dns mdns4 I've added wins right after files (and also tried before dns. Nothing helps. Reboot after every change. What am I missing?

  Read the article

• git log throws error "ambiguous argument"

  - by LonelyPixel

  This used to work about a year ago. Now it doesn't: git log --abbrev=6 The expected result would be all commit hashes abbreviated to 6 characters. The actual result is now this error message: fatal: ambiguous argument '6': unknown revision or path not in the working tree. Use '--' to separate paths from revisions, like this: 'git [...] -- [...]' I have the impression that Git doesn't even know about that argument and tries to silently ignore its name but not the value. Using Git 1.8.1.msysgit.1 on Windows 7. Addition: Oh and it fails on other parameters, too. The entire command is: git log --abbrev=6 --format=format:"----- Commit %%h on %%ci by %%an -----%%n%%n%%B" If I just leave the abbrev part out, it still returns another error: fatal: Invalid object name 'format'.

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

• Any way to tell apart a CPU defect from a mainboard defect?

  - by Pekka

  I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

  Read the article

• What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

  - by Ogapo

  I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

  Read the article

• Is there a tool for verifying the contents of a Zip archive against the source directory's contents?

  - by Basil

  Here's the scenario: I create a ZIP archive using some GUI package like WinZip, 7-Zip or whatever by right-clicking on a directory "somename" and selecting "Compress to archive 'somename.zip'" When the archive is completed, I open it and discover that some files don't exist in the archive (for reasons yet unknown). I want to find all files that are missing from the archive without having to extract the archive to another directory, then doing directory diff, etc. So.. Is there a tool (GUI or command-line, standalone or built into a compressor, for Windows or Linux, I don't care) that can walk through an archive and compare its contents against a directory on the filesystem?

  Read the article

• PHP Shared Sessions across Domain

  - by bigstylee

  Hi, I have seen a few answers to this on SOO but most of these are concerned with the use of subdomains, of which none have worked for me. The common one being that the use of session.cookie_domain, which from my understanding will only work with subdomains. I am interested in a solution that deals with deals with entirely different domains (and includes the possibility of subdomains). Unfortunately project deadlines being what they are, time is not on my side, so I turn to SOO's expertise and experience. The current project brief is to be able to log into one site which currently only stores the user_id in the session and then be able to retrieve this value while on a different domain within the same server enviroment. Session data is being stored/retrieved from a database where the session id is the primary key. I am hoping to find a "light wieght" and "easy" to implement solution. The system is utlising an in-house Model View Controller design pattern, so all requests (including different domains) are run through a single bootstrap script. Using the domain name as a variable, this determines what context to display to the user. One option that did look like to have potential is the use of a hidden image and using the alt tag to set the user id. My first impressions suggest this immediately seems "too easy" (if possible) and riddled with security flaws. Disscuss? Another option which I considered is using the IP and User Agent for authentication but again I feel this not going to be a reliable option due to shared networks and changing IP addresses. My third option (and preferred) which I considered and as yet not seen discussed is using htaccess to fool the user into thinking that they are on a different domain when infact apache is redirecting; something like www.foo.com/index.php?domain=bar.com&controller=news/categoires/1 but displays to the user as www.bar.com/news/categories/1 foo.com represents the "main site domain" which all requests are run through and bar.com is what the user thinks they are accessing. The controller request dictates the page and view being requested. Is this possible? Are there other options? Pros/Cons? Thanks in advanced!!!

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >