Search Results

Search found 37607 results on 1505 pages for 'ms access 97'.

Page 954/1505 | < Previous Page | 950 951 952 953 954 955 956 957 958 959 960 961  | Next Page >

• How to monitor the temperature of a HP Procurve 3500 switch via SNMP

  - by Murali Suriar

  I am attempting to poll the temperature of an HP ProCurve 3500YL switch remotely using SNMP. Looking at this MIB, it appears that the following OIDs: hpCpuTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 hpPowerSupplyTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 hpChassisTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 Within the 'hpProcurveSysMib' should provide the data I need. However, whenever I attempt to access these OIDs, I receive the response: SNMPv2-SMI::enterprises.11.2.3.7.11.17.7.1.1.1.6 = No Such Object available on this agent at this OID Further investigation reveals that the switch in question does not appear to implement the parent hpProcurveSystem MIB: SNMPv2-SMI::enterprises.11.2.3.7.11.17.7.1.1 = No Such Object available on this agent at this OID Does anyone know of an alternative MIB implemented by the 3500 that will allow its temperature to be polled automatically?

  Read the article

• Bandwidth Control on our Internet Connection

  - by AlamedaDad

  Hi all, I have Covad dual/bonded T1 service in our office coming through a Cisco 1841 and then through a Sonicwall 3060Pro/Enhanced SW firewall. The problem I'm looking for some input on is how to limit the amount of bandwidth any single user/PC can user for downloading a file from the Internet. It's become an issue that when one person happens to download let's say an ~300MB file, normal internet access for the other employees slows to a crawl. I've seen through MRTG that in fact usage of the circuit jumps to the full 3mb for the duration of the download and then drops. Is it possible to control this? I'm not familiar with QOS or the like so I'm not sure. Any help on this would be appreciated. Thanks...Michael

  Read the article

• Bridging VirtualBox over OpenVPN TAC adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• VPN Network intermittantly fails to provide internet: What could be possible causes

  - by Jake M

  We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

  Read the article

• How to disable Tcp/Ip settings in windows 7 via GPO?

  - by Akash Kava

  I have enabled following policies, "Prohibit TCP/IP advanced connection" "Prohibit access to properties of components of a LAN connection" "Enable Windows 2000 Network Connections setings for Administrators" after doing all these, all machines running windows xp, 2000 and vista have network settings properties button disabled as expected. However all machines running windows 7 have no effect, I believe there are few more steps, all Windows 7 machines are on domain and we want to control this via Domain Controler's GPO. Please let me know, what I need to do to have Windows 7 disable the properties of network connection, I am not network expert, I read few articles about what new has been added in GPO of windows 7 but I am blank. Everything works fine on Windows XP, Vista, 2003 Server. Only Windows 7 is a problem.

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Trouble with cross network permissions for an image through iis7 in an asp.net virtual directory

  - by EdenMachine

  I have load balanced web servers My web application has a function that allows the user to upload their company logo to display in the application header obviously, when they upload the logo image file, it needs to be in a central location or otherwise, the file will not be accessible to the other server on the load balancer. in order to be able to upload the image through the application other on one of either servers and then display it on both servers I need a virtual directory in IIS on both servers that point to a third "file server" (this is the "AcctData" directory shown below with a sub folder "images") the problem is that no matter what I do, I run into a permissioning issue If I use pass-through authentication I get a 401 error. If I use a specific user that's set up on both boxes, I get a 500 error. The "Default" application under "CP" (shown in the image below) uses an AppPool that is a Domain Account that has admin permissions on all the servers. I've also tried sticking a Web.config file in the "AcctData" directory allowing anonymous access. Nothing is working though.

  Read the article

• Web based console connections not working in Windows 7 posted: Jan 20, 2010 8:55 AM

  - by nmeth

  For slightly complicated reasons we tend to give people console access to VMs via the webui. This has worked fine in the past, however when the users update their client machines to Windows 7 (or Vista, I am told, although I have not tested that), then the console fails to work. On IE8, having allowed the ActiveX control, the tab causes a "Internet Explorer has stopped working" dialog. On Firefox 3.5 , once the plugin has been installed, using the console causes the browser to crash. I've updated to the most recent VC 2.5 release, and ESX 3.5u5. Anyone else seeing this? Any clues how to get round it (other than using the fat client). Nigel.

  Read the article

• Asus G53SX How to use the recovery partition

  - by Amento

  I am trying to use the recovery partition on my Asus G53SX laptop, but the instructions in the included booklet don't match up with what happens on the computer. It says press F9 during bootup and then press ENTER to select windows setup. Then select the language you want to recover, and so on. When I press F9 I end up in the boot manager and from there I can access safe mode and all these things. The closest thing I can find in this list is "Repair your computer" but this menu takes me to recovery points and backup images, none which are mentioned in the booklet. How can I use the recovery partition to restore my laptop to factory state?

  Read the article

• Virtual PC network connection setting issue

  - by George2

  Hello everyone, I am using Virtual PC 2007 on Windows Vista Enterprise x86. My confusion is about the network setting for guest OS. In the network setting, I can set the network adaptor of guest OS to one of my physical network adaptors of my host OS (I have tested that it works for guest OS to use the physical network adaptor of host OS to access external network). But in this way, 1. since both host OS and guest OS will use the same physical network adaptor, will there be any conflicts (e.g. same H/W serves two OS)? 2. will guest OS share a part of network bandwidth of the host OS of the physical network adaptor? 3. What means NAT setting in guest OS network connection adaptor? thanks in advance, George

  Read the article

• Security risk of JIRA standalone installation running JRE version 1.6.0_26 vs 1.6.0_29 (latest)

  - by kayaker243

  Atlassian recently introduced a standalone installer that installs JIRA, along with its own JRE. Unfortunately the JRE Atlassian bundles with this installer is 1.6.0_26, whereas the current version of the JRE is 1.6.0_29. This is potentially concerning given there were vulnerabilities in _26 that were fixed in the subsequent versions. We are currently using the bundled-installer version of JIRA and one contractor has recommended we ditch this for the system-installed JRE. My question is this: what is the actual security risk of continuing to use the _26 version of the JRE included in the bundled installer? There is no public access to our install of JIRA (only about 20 employees and contractors can login to our JIRA) and it's only accessible on a subdomain of a domain at which there's no publicly-available website. If there's a not insignificant risk inherent in sticking with the older JRE, why hasn't Atlassian upgraded the default JRE?

  Read the article

• Can I setup a link SQL server connection between servers on different networks?

  - by Glenn Slaven

  We have a production SQL server hosted offsite at a hosting company, and we have a staging environment within our own network. We want to be able to setup a SQL job that copies content from a table on the staging server to prod on a regular basis, and I think we need to setup a linked server connection to do this. What do I need to get the hosting company to do to allow us to set this up? We have RDP access to the production servers, I just need to know what network and security configurations need to happen from the hosting company's perspective so I can ask them to do it.

  Read the article

• pfSense + DDoS Protection

  - by Jeremy

  I run a gaming community on a colo with a 100Mbps port. I want to buy a very cheap 35 dollar server with the same 100Mbps port, and run pfSense to use as a hardware firewall. I'm dealing with a bunch of 14 year old kids that have access to botnets, so it can become a bit necessary to get something like this. My overall question, is using pfSense on a cheap identical datacenter/port speed server worth it to actually block DDoS attacks? A bit more into detail since I assume you will ask this, the attacks we receive are normally around 1Gbps. We currently run CentOS using CSF Firewall, and even when using a software firewall, we block 500Mbps UDP floods, or just generic attacks pretty easily. Thanks, - Necro

  Read the article

• Unable to map to web folder using WebDAV client on Windows Server 2008 R2

  - by user74989

  I have a client running Windows Server 2008 R2 on several servers. One of the servers is also running SharePoint 3.0 and my client has created a web folder to map to. I can map to the web folder from all Server 2008 R2 boxes that have the WebDAV client (part of Desktop Experience feature) installed, except for the server the folder resides on. When I attempt to map to the web folder on the server which the folder resides, I am repeatedly prompted to enter my credentials. I am using the same account that I used to map the web folder on the other servers. I have also tried mapping from the command line and receive 'Access Denied' What may be causing the problem? I would think that if I can map to the drive from one server, I should be able to map the drive from the rest as long as the WebDAV client is installed, especially on the server where the folder is located. Jesse

  Read the article

• How to enable mod_info in Apache?

  - by Amit Nagar

  I gone through the apache guide to enable to mod_info. As per doc: To configure mod_info, add the following to your httpd.conf file. Location /server-info SetHandler server-info /Location You may wish to use mod_access inside the directive to limit access to your server configuration information: Location /server-info SetHandler server-info Order deny,allow Deny from all Allow from yourcompany.com Location Once configured, the server information is obtained by accessing http://your.host.dom/server-info In my case the this link is not giving any info. Http 404 NOT FOUND error Is there anything I need to install as mod_info.c or something ? Is there anything i need to put as AddModule or something ? In Error log : File does not exist: /usr/local/apache2/htdocs/example1/server-info I have 3 virtual host. One of this as default which use example1 as Docroot dir. I am not sure where this page (server-info) should be ? in case of server-status, it's working fine

  Read the article

• Percona MySQL 5.5 fails to start

  - by keymone

  trying to setup new server here but keep getting this in error log: mysqld_safe Starting mysqld daemon with databases from /data/mysql/myisam [Warning] Can't create test file /data/mysql/myisam/hostname.lower-test [Warning] Can't create test file /data/mysql/myisam/hostname.lower-test [Note] Flashcache bypass: disabled [Note] Flashcache setup error is : setmntent failed /usr/sbin/mysqld: File '/var/mysql/bin/bin-log.index' not found (Errcode: 13) [ERROR] Aborting [Note] /usr/sbin/mysqld: Shutdown complete mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended everything under /data/mysql (it's ibdata and myisam folders) is owned my mysql:mysql and has proper permissions same goes for folders with bin and relay logs under /var/mysql apparmor is purged from server any ideas? PS it seems like something else apart from apparmor is affecting permissions to access mysql files after i changed data directory to more default one - /var/lib/mysql and "Can't create test file" error is gone, but "'/var/mysql/bin/bin-log.index' not found (Errcode: 13)" is still there PPS so i installed apparmor back and added all folders to mysqld's profile and errors mentioned above are now gone(or mysql doesn't even get to that point now) what i have now is this: /usr/sbin/mysqld: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory banging my head against the wall.

  Read the article

• Restore data from overwritten LVM

  - by Matthias Bayer

  I lost all of my data (8 TB) which I collected over the past few years yesterday because I made some seriuos mistakes during the remounting of my LVM. I run a XenServer5.6 installation with additional 4 harddisks for data storage. An LVM over those 4 HDDs was used to store all of my data. Yesterday, I reinstalled XenServer and wanted to mount my old Harddrives and add the LVM. I run xe sr-create [...] for all disks (/dev/sdb .. /dev/sde), but that was totally wrong. This command deletes the old LVM on the disks and created an new, empty lvm on every single disk with no partitions. No i got 4 empty harddrives :( Is it possible to recover some data from that lost LVM volumes? I have no clue how to do it because i deleted all informations about the old LVM. Is there a way to access the files insed that old lvm directly?

  Read the article

• How can I enable http auth in lighttpd for all directories except one?

  - by Nuri Hodges

  I am trying to authenticate access to everything in webroot (/) except anything that resides in a particular directory (/directory/) and I've tried both of these options to no avail: $HTTP["url"] =~ "^(?!(/directory))" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) } $HTTP["url"] != "/directory" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) }

  Read the article

• Submit form to another domain

  - by doubter

  I need to access the result of submitting a form to a website. There is a web site where you complete a form and it posts the information using ajax and then tells you if you have their service in the are or not. I'd like to be able to do this from my web page, which means posting the information required by the form to their server and getting the result. The problem is I get "403 Forbidden", I think it's because the "Origin" being a different domain. Is there anyway that I can the response from the server on my website? I thought about php_curl (used once with google docs api) but would like to know what you guys think it's the best way.

  Read the article

• What ports to open in aws security group for aws?

  - by HarrisonJackson

  I am building the backend for a turn based gamed. My experience is mostly with a lamp stack; I've dabbled in nginx on a node side project. I just read Scaling PHP Applications by Stephen Corona of Twit Pic. He recommends an nginx server over apache. He says that his ubuntu machine has 32768-61000 ports open. On AWS do I need to modify my security to group to allow access to those ports? How do I ensure nginx is taking full advantage of this configuration?

  Read the article

• Ulimit settings in Oracle 11g on Linux 5

  - by Stuart

  Is there an issue with "Ulimit -Hn" being set too low (at 1024) when (Oracle recommend 65536)? This is for Oracle 64-bit 11g on Linux 5. It is one of the settings that appears to be woefully short of its recommendation. But I am also aware that the database server in question is an Oracle Data Guard Local Standby and should only really have a connection or two from its Primary database server (to ship the redo logs across). The Local Standby database server has 'hung' about 3 times in as many months and then requires a reboot. I do not have access to this server, so rely on others to look at logs etc. The sanity check on kernel params uncovered the low value for "ulimit -Hn". Has anyone ever seen that 'low' value cause a hang or crash?

  Read the article

• is it possible to get IP address of a wifi that you are not connected to

  - by coltonon

  Just like the question states. Is it somehow possible to get the IP address of a network that you don't have access to? For example, if you click the little wifi button on your task bar, and highlight your cursor over one of the options, you get some info. But your external IP address is actually the address of the router, isn't it? Which would mean you would have to connect to the wifi, and then the router to get an IP address, correct? I realy just want a simple answer: No or Yes and here's how

  Read the article

• Unable to configure Rails with readline

  - by Liam Berg

  1) ./configure --prefix=$HOME/.packages --with-readline-dir=$HOME/.packages 2) configure: WARNING: unrecognized options: --with-readline-dir I am trying to setup the most up-to-date version of Rails on my webhost (I do not have sudo access). Line 1 is the configure command I used for Ruby and Line 2 is the first printed line after executing 'configure'. I've googled this issue and found other people with the same problem but there aren't any real solutions. There are no warnings or errors when configuring/compiling readline-6.1. I am pretty stumped, any help/insight would be greatly appreciated. Thanks ahead of time.

  Read the article

• Cannot see main user profile directory on old vista hdd on win7

  - by chaoskreator

  I have an old laptop HDD that ran Vista that I need to get some pictures and movies off of. I've attached it via SATA cable to my new Win 7 (64 bit) machine and it mounts fine, except I can't see the main user profile in the D:\Users directory. I've changed ownership and permissions for the D: drive to my C:\ Username but still no luck. I read something about it being caused by the UAC being active on the Vista machine. Is this true? Is there a way to disable this and gain access to the main profile without putting it back into the old laptop (it's fried and won't boot)?

  Read the article

< Previous Page | 950 951 952 953 954 955 956 957 958 959 960 961  | Next Page >