auto generation - Page 96

Easy Made Easier

- by dragonfly

How easy is it to deploy a 2 node, fully redundant Oracle RAC cluster? Not very. Unless you use an Oracle Database Appliance. The focus of this member of Oracle's Engineered Systems family is to simplify the configuration, management and maintenance throughout the life of the system, while offering pay-as-you-grow scaling. Getting a 2-node RAC cluster up and running in under 2 hours has been made possible by the Oracle Database Appliance. Don't take my word for it, just check out these blog posts from partners and end users. The Oracle Database Appliance Experience - Zip Zoom Zoom http://www.fuadarshad.com/2012/02/oracle-database-appliance-experience.html Off-the-shelf Oracle database servers http://normanweaver.wordpress.com/2011/10/10/off-the-shelf-oracle-database-servers/ Oracle Database Appliance – Deployment Steps http://marcel.vandewaters.nl/oracle/database-appliance/oracle-database-appliance-deployment-steps See how easy it is to deploy an Oracle Database Appliance for high availability with RAC? Now for the meat of this post, which is the first in a series of posts describing tips for making the deployment of an ODA even easier. The key to the easy deployment of an Oracle Database Appliance is the Appliance Manager software, which does the actual software deployment and configuration, based on best practices. But in order for it to do that, it needs some basic information first, including system name, IP addresses, etc. That's where the Appliance Manager GUI comes in to play, taking a wizard approach to specifying the information needed. Using the Appliance Manager GUI is pretty straight forward, stepping through several screens of information to enter data in typical wizard style. Like most configuration tasks, it helps to gather the required information before hand. But before you rush out to a committee meeting on what to use for host names, and rely on whatever IP addresses might be hanging around, make sure you are familiar with some of the auto-fill defaults for the Appliance Manager. I'll step through the key screens below to highlight the results of the auto-fill capability of the Appliance Manager GUI. Depending on which of the 2 Configuration Types (Config Type screen) you choose, you will get a slightly different set of screens. The Typical configuration assumes certain default configuration choices and has the fewest screens, where as the Custom configuration gives you the most flexibility in what you configure from the start. In the examples below, I have used the Custom config type. One of the first items you are asked for is the System Name (System Info screen). This is used to identify the system, but also as the base for the default hostnames on following screens. In this screen shot, the System Name is "oda". When you get to the next screen (Generic Network screen), you enter your domain name, DNS IP address(es), and NTP IP address(es). Next up is the Public Network screen, seen below, where you will see the host name fields are automatically filled in with default host names based on the System Name, in this case "oda". The System Name is also the basis for default host names for the extra ethernet ports available for configuration as part of a Custom configuration, as seen in the 2nd screen shot below (Other Network). There is no requirement to use these host names, as you can easily edit any of the host names. This does make filling in the configuration details easier and less prone to "fat fingers" if you are OK with these host names. Here is a full list of the automatically filled in host names. 1 2 1-vip 2-vip -scan 1-ilom 2-ilom 1-net1 2-net1 1-net2 2-net2 1-net3 2-net3 Another auto-fill feature of the Appliance Manager GUI follows a common practice of deploying IP Addresses for a RAC cluster in sequential order. In the screen shot below, I entered the first IP address (Node1-IP), then hit Tab to move to the next field. As a result, the next 5 IP address fields were automatically filled in with the next 5 IP addresses sequentially from the first one I entered. As with the host names, these are not required, and can be changed to whatever your IP address values are. One note of caution though, if the first IP Address field (Node1-IP) is filled out and you click in that field and back out, the following 5 IP addresses will be set to the sequential default. If you don't use the sequential IP addresses, pay attention to where you click that mouse. :-) In the screen shot below, by entering the netmask value in the Netmask field, in this case 255.255.255.0, the gateway value was auto-filled into the Gateway field, based on the IP addresses and netmask previously entered. As always, you can change this value. My last 2 screen shots illustrate that the same sequential IP address autofill and netmask to gateway autofill works when entering the IP configuration details for the Integrated Lights Out Manager (ILOM) for both nodes. The time these auto-fill capabilities save in entering data is nice, but from my perspective not as important as the opportunity to avoid data entry errors. In my next post in this series, I will touch on the benefit of using the network validation capability of the Appliance Manager GUI prior to deploying an Oracle Database Appliance.

Read the article

Bullets WILL NOT dissapear in firefox

- by DunlopBurns

Hoping you can help me with a problem. I cannot get rid of Bullets in Firefox, i don't want any anywhere, hence my list-style-type: none!important being everywhere. It only appears in Firefox as far as i can tell. the HTML.... <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> <head> <title>littleprints.nl</title> <meta name="description" content="----" /> <meta name="keywords" content="----" /> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js"></script> <script type="text/javascript" src="js/slimbox2.js"></script> <link rel="stylesheet" href="css/slimbox2.css" type="text/css" media="screen" /> <link rel="stylesheet" href="layout.css"/> <link rel="stylesheet" href="style.css"/> </head> <body> <div id="container"> <div id="inline1"> <div id="mainpic"> <img src="myimages/circle.jpg" width="100%" alt="Circle bracelet"/> </div> <div id="intro"> <p>Hi and welcome to little prints NL. we make this and that all by hand with 100% silver. my name is Donna Burns and i work by commision, ive been studying for 4 years and am currently learning to become a goldsmith.</p> </div> </div> <div id="inline2"> <p>Click for more...</p> <div id="images"> <a href="myimages/photos/dogtag.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" ><img src="myimages/work/chunky.gif" alt="chunky"/></a> <a href="myimages/photos/hearts.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" ><img src="myimages/work/hearts.gif" alt="hearts"/></a> <a href="myimages/photos/close.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" ><img src="myimages/work/close.gif" alt="close"/></a> <a href="myimages/photos/pearl.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" > </a> <a href="myimages/photos/flower.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" > </a> <a href="myimages/photos/frontcircle.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" > </a> <a href="myimages/photos/dogtag.jpg" rel="lightbox-gal" title="Beautiful, isn't it?" > </a> </div> </div> </div> <div id="footer"> <div id="footalign"> <div id="social"> <ul> <li> <a href="http://www.facebook.com/littleprints" title="Little Prints"> <img src="myimages/facebook.png" width="50px" height="50px" alt="FB"/> </a> </li> <li> <a href="contact.html" title="contact"> <img src="myimages/at.gif" alt="@"/> </a> </li> </ul> </div> <div id="contact"> <p><br/>To enquire about a charm either phone:<br/> 0787463289<br/> or use one of the methods to the side.</p> </div> </div> </div> </body> </html> the CSS... * {margin: 0; padding: 0; border: 0;} html, body { background-color: #000000;image; text-align: center; font: 16px/1.8 Verdana, Arial, Helvetica, sans-serif; list-style-type: none!important; text-decoration: none;} #container { position: relative; width: 900px; top: 0; min-height: 100%; margin-left: auto; margin-right: auto; padding-top: 20px; background-image: URL(myimages/back2.gif); margin-bottom: 180px; } #footer { background-color: #555555; position: relative; clear: both; bottom: 0; width: 900px; height: auto; margin-left: auto; margin-right: auto; margin-bottom: 20px; padding-bottom: 22px; margin-top: -180px; } #inline1{ display: inline-block; margin-top: 250px; margin-bottom: 20px; } #inline2 { display: inline-block; margin-top: 30px; margin-bottom: 50px; } #mainpic { float: left; width: 68%; margin-left: 20px; } #intro { float: right; width: 20%; margin-left: auto; margin-right: 50px; margin-top: 20px; } #images { margin-bottom: 20px; margin-left: auto; margin-right: auto; } #footalign { display: inline; width:900px; list-style-type: none; } #contact { text-align: center; background-color:#555555; float: middle; list-style-type: none; } #social{ background-color:#555555; float: right; list-style: none; padding:0; padding-right: 5px; text-align:center; list-style-type: none!important; } #social img{ border: none; list-style-type: none!important; margin: 3px; } #social ul{ border: none; list-style-type: none!important; } #social a{ display:inline-block; -webkit-transition:all .5s ease-out; -moz-transition:all .5s ease-out; -ms-transition:all .5s ease-out; -o-transition:all .5s ease-out; transition:all .5s ease-out; list-style-type: none!important; } #social a:hover{ display:inline-block; -webkit-transform:translate(-10px,0px); -moz-transform:translate(0px,-10px); -ms-transform:translate(-10px,0px); -o-transform:translate(-10px,0px); transform:translate(-10px,0px); list-style-type: none!important; } #form { margin-top: 250px; margin-bottom: 50px; } .nav1 {font-family: sans-serif;font-size: 22px;text-shadow: 2px 2px 5px #000000;} a:link {text-decoration:none; color:#000000; padding:3px;} a:visited {text-decoration:none; color:#000000;} a:active {text-decoration:none; color:#555555;} a:hover {text-decoration:none; color:#555555;} .nav2 {font-family: sans-serif;font-size: 22px;text-shadow: 2px 2px 5px #ffffff;} a:link {text-decoration:none; color:#ffffff; padding:3px;} a:visited {text-decoration:none; color:#ffffff;} a:active {text-decoration:none; color:#555555;} a:hover {text-decoration:none; color:#555555;} .p1 { color: #ffffff; } div#images img { max-width: 500px; height: auto; }

Read the article

Intro Bar like stack overflow

- by Dasa

I have a simple top bar using jquery like the one on stackoverflow, but i want it to only appear on the first time a person visits the website. below is the HTML followed by the "bxSlider.js" file <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <script type="text/javascript" src="bxSlider.js"></script> <title>topbar</title> <style type="text/css" media="screen"> #message { font-family:Arial,Helvetica,sans-serif; position:fixed; top:0px; left:0px; width:100%; z-index:105; text-align:center; color:white; padding:2px 0px 2px 0px; background-color:#8E1609; } #example1 { text-align: center; width: 80%; } .close-notify { white-space: nowrap; float:right; margin-right:10px; color:#fff; text-decoration:none; padding-left:3px; padding-right:3px } .close-notify a { color: #fff; } h4, p { margin:0px; padding:0px; } </style> </head> <body> <DIV ID='message' style="display: none;"> <DIV ID="example1"> <DIV CLASS="item"> <h4>Head 1</h4> <p>Text 1</p> </div> <DIV CLASS="item"> <h4>Head 2</h4> <p>Text 2</p> </div> </div> <a href="#" CLASS="close-notify" onclick="closeNotice()">X</a> </div> <script type="text/javascript"> $(document).ready(function() { $("#message").fadeIn("slow"); $('#example1').bxSlider({ mode: 'slide', speed: 250, wrapper_CLASS: 'example1_container' }); }); function closeNotice() { $("#message").fadeOut("slow"); } </script> </body> </html> /** * * * bxSlider: Content slider / fade / ticker using the jQuery javascript library. * * Author: Steven Wanderski * Email: [email protected] * URL: http://bxslider.com * * **/ jQuery.fn.bxSlider = function(options){ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Declare variables and functions ///////////////////////////////////////////////////////////////////////////////////////////////////////////// var defaults = { mode: 'slide', speed: 500, auto: false, auto_direction: 'left', pause: 2500, controls: true, prev_text: 'prev', next_text: 'next', width: $(this).children().width(), prev_img: '', next_img: '', ticker_direction: 'left', wrapper_class: 'container' }; options = $.extend(defaults, options); if(options.mode == 'ticker'){ options.auto = true; } var $this = $(this); var $parent_width = options.width; var current = 0; var is_working = false; var child_count = $this.children().size(); var i = 0; var j = 0; var k = 0; function animate_next(){ is_working = true; $this.animate({'left':'-' + $parent_width * 2 + 'px'}, options.speed, function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':first').appendTo($this); is_working = false; }); } function animate_prev(){ is_working = true; $this.animate({'left': 0}, options.speed, function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':last').insertBefore($this.children(':first')); is_working = false; }); } function fade(direction){ if(direction == 'next'){ var last_before_switch = child_count - 1; var start_over = 0; var incr = k + 1; }else if(direction == 'prev'){ var last_before_switch = 0; var start_over = child_count -1; var incr = k - 1; } is_working = true; if(k == last_before_switch){ $this.children().eq(k).fadeTo(options.speed, 0); $this.children().eq(start_over).fadeTo(options.speed, 1, function(){ is_working = false; k = start_over; }); }else{ $this.children().eq(k).fadeTo(options.speed, 0); $this.children().eq(incr).fadeTo(options.speed, 1, function(){ is_working = false; k = incr; }); } } function add_controls(){ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Check if user selected images to use for next / prev ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.prev_img != '' || options.next_img != ''){ $this.parent().append('<a class="slider_prev" href=""><img src="' + options.prev_img + '" alt=""/></a><a class="slider_next" href=""><img src="' + options.next_img + '" alt="" /></a>'); }else{ $this.parent().append('<a class="slider_prev" href="">' + options.prev_text + '</a><a class="slider_next" href="">' + options.next_text + '</a>'); } $this.parent().find('.slider_prev').css({'float':'left', 'outline':'0', 'color':'yellow'}); $this.parent().find('.slider_next').css({'float':'right', 'outline':'0', 'color':'yellow'}); ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Accomodate padding-top for controls when elements are absolutely positioned (only in fade mode) ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.mode == 'fade'){ $this.parent().find('.slider_prev').css({'paddingTop' : $this.children().height()}) $this.parent().find('.slider_next').css({'paddingTop' : $this.children().height()}) } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Actions when user clicks next / prev buttons ///////////////////////////////////////////////////////////////////////////////////////////////////////////// $this.parent().find('.slider_next').click(function(){ if(!is_working){ if(options.mode == 'slide'){ animate_next(); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){animate_next();}, options.pause); } }else if(options.mode == 'fade'){ fade('next'); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){fade('next');}, options.pause); } } } return false; }); $this.parent().find('.slider_prev').click(function(){ if(!is_working){ if(options.mode == 'slide'){ animate_prev(); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){animate_prev();}, options.pause); } }else if(options.mode == 'fade'){ fade('prev'); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){fade('prev');}, options.pause); } } } return false; }); } function ticker() { if(options.ticker_direction == 'left'){ $this.animate({'left':'-' + $parent_width * 2 + 'px'}, options.speed, 'linear', function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':first').appendTo($this); ticker(); }); }else if(options.ticker_direction == 'right'){ $this.animate({'left': 0}, options.speed, 'linear', function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':last').insertBefore($this.children(':first')); ticker(); }); } } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Create content wrapper and set CSS ///////////////////////////////////////////////////////////////////////////////////////////////////////////// $this.wrap('<div class="' + options.wrapper_class + '"></div>'); //console.log($this.parent().css('paddingTop')); if(options.mode == 'slide' || options.mode == 'ticker'){ $this.parent().css({ 'overflow' : 'hidden', 'position' : 'relative', 'margin' : '0 auto', 'width' : options.width + 'px' }); $this.css({ 'width' : '999999px', 'position' : 'relative', 'left' : '-' + $parent_width + 'px' }); $this.children().css({ 'float' : 'left', 'width' : $parent_width }); $this.children(':last').insertBefore($this.children(':first')); }else if(options.mode == 'fade'){ $this.parent().css({ 'overflow' : 'hidden', 'position' : 'relative', 'width' : options.width + 'px' //'height' : $this.children().height() }); if(!options.controls){ $this.parent().css({'height' : $this.children().height()}); } $this.children().css({ 'position' : 'absolute', 'width' : $parent_width, 'listStyle' : 'none', 'opacity' : 0 }); $this.children(':first').css({ 'opacity' : 1 }); } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Check if user selected "auto" ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(!options.auto){ add_controls(); }else{ if(options.mode == 'ticker'){ ticker(); }else{ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Set a timed interval ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.mode == 'slide'){ if(options.auto_direction == 'left'){ $.t = setInterval(function(){animate_next();}, options.pause); }else if(options.auto_direction == 'right'){ $.t = setInterval(function(){animate_prev();}, options.pause); } }else if(options.mode == 'fade'){ if(options.auto_direction == 'left'){ $.t = setInterval(function(){fade('next');}, options.pause); }else if(options.auto_direction == 'right'){ $.t = setInterval(function(){fade('prev');}, options.pause); } } if(options.controls){ add_controls(); } } } }

Read the article

Drop Down not even showing up in IE6

- by blackessej

I've got a drop down menu here that just plain won't show up in IE6. The site works perfectly in every other browser. Seems daft to lose sleep over IE6, I know, but the site is for a demographic who could very well still be using it. Here's the CSS: html { height:100%; } body, p, a, ul, li, ol, h1, h2, h3, h4, h5, h6 { margin:0; padding:0; } body { behavior:url("csshover3.htc"); font-size:14px; font-family:Arial, Helvetica, sans-serif; background-color:#d3d3d3; height:100%; } h1 { font-size:18px; color:#752eca; text-decoration:none; } h2 { font-size:14px; color:#909090; text-decoration:none!important; } p { text-indent:20px; color:#000; } p a { color:#000; text-decoration:underline; } p.foot { text-indent:0px; } p.link { font-size:18px; color:#30F; text-decoration:underline!important; } a { color:#4d2288; text-decoration:none; outline:none; } a:visited { color:#4d2288; } p a:hover { text-decoration:underline!important; } ul#nav { padding:5px; margin:0px auto; width:100%; } ul#nav li a { display:block; font-weight:bold; padding:2px 10px; background:#bacddb; } ul#nav li a:hover { background:#888; color:#fff; } li { list-style:none; float:left; position:relative; width:225px; text-align:center; margin:0px auto; margin-right:4px; border:1px solid #4d2288; } li ul { display:none; position:relative; width:auto; top:0; left:0; margin-left:-1px; } li>ul { top:auto; left:auto; border-top:none; } li:hover ul, li.over ul { display:block; } ul#nav li.current a { background:#b8ab28; } ul#nav li.current a:hover { background:#888; } img { margin:10px 0 5px; } *html img { margin:20px; } .coltextimg { position:relative; float:left; background-position:left bottom; padding:0px 20px 10px 0px; border:none; } #maincontent { width:940px; margin:0px auto; postition:absolute; } *html #maincontent { margin-left:42px; } #header { float:left; width:100%; height:auto!important; height:100%; min-height:100%; margin:0px auto; background-image:url(images/banner_test.jpg); background-repeat:no-repeat; border:2px solid #752eca; -webkit-border-top-left-radius:10px; -webkit-border-top-right-radius:10px; -moz-border-radius-topleft:10px; -moz-border-radius-topright:10px; border-top-left-radius:10px; border-top-right-radius:10px; } .colmask { position:relative; margin-top:160px; clear:both; float:left; width:100%; overflow:hidden; } .colright, .colmid { float:left; width:100%; position:relative; } .col1, .col2 { float:left; position:relative; padding:10px 0 1em 0; overflow:hidden; } .twocol { background:#fff; } .twocol .colmid { right:45%; background:#fff; } .twocol .col1 { width:51%; left:47%; text-align:justify; z-index:0; } .twocol .col2 { width:41%; left:51%; text-align:justify; z-index:0; } .twocol .colimg { border:2px solid #a0a0a0; } .twocol .colvid1 { width:360px; height:240px; } .twocol .colvid2 { width:360px; height:240px; } #footer { text-align:center; font-size:9px; padding:10px 0 1em 0; clear:both; width:100%; height:100%; } *html #footer { height:43px; } #footer p a { text-decoration:none; } #lyr_ddmenu { position:absolute; z-index:1; height:10px; top:120px; float:left; width:1000px; margin:0px auto; padding:5px; } #contact { position:absolute; float:right; font-size:10px; } A.Controls:link { color:#666666; text-decoration:none; font-weight:bold; } A.Controls:visited { color:#666666; text-decoration:none; font-weight:bold; } A.Controls:active { color:#666666; text-decoration:none; font-weight:bold; } A.Controls:hover { color:#be0000; text-decoration:none; font-weight:bold; } And here's the html I'm having the specific problem with: <div id="maincontent"> <div id="header"> <div id="lyr_ddmenu"> <ul id="nav"> <li class="current"><href here...</a> <ul class="sub"> <li><href here...</a></li> <li><href here...</a></li> <li><href here...</a></li> <li><href here...</a></li> <li><href here...</a></li> </ul></li> <li><href here...</a></li> <ul class="sub"> <li><href here...</a></li> <li><href here...</a></li> <li><href here...</a></li> <li><href here...</a></li> </ul></li> <li><href here...</a></li> <li><href here...</a></li> <ul class="sub"> <li><href here...</a></li> </ul></li> </ul> </div> Thanks!

Read the article

Spring @Transactional not creating required transaction

- by Steve

Ok, so I've finally bowed to peer pressure and started using Spring in my web app :-)... So I'm trying to get the transaction handling stuff to work, and I just can't seem to get it. My Spring configuration looks like this: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd"> <bean id="groupDao" class="mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao" lazy-init="true"> <property name="entityManagerFactory" ><ref bean="entityManagerFactory"/></property> </bean>  <bean class="org.springframework.beans.factory.annotation.RequiredAnnotationBeanPostProcessor"/>  <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor"/>  <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalEntityManagerFactoryBean"> <property name="persistenceUnitName" value="CONOPS_PU" /> </bean>  <bean id="jpaTransactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory"/> </bean>  <tx:annotation-driven transaction-manager="jpaTransactionManager" proxy-target-class="true"/> </beans> persistence.xml: <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="CONOPS_PU" transaction-type="RESOURCE_LOCAL"> <provider>org.hibernate.ejb.HibernatePersistence</provider> ... Class mappings removed for brevity... <properties> <property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect"/> <property name="hibernate.connection.autocommit" value="false"/> <property name="hibernate.connection.username" value="****"/> <property name="hibernate.connection.password" value="*****"/> <property name="hibernate.connection.driver_class" value="oracle.jdbc.OracleDriver"/> <property name="hibernate.connection.url" value="jdbc:oracle:thin:@*****:1521:*****"/> <property name="hibernate.cache.provider_class" value="org.hibernate.cache.NoCacheProvider"/> <property name="hibernate.hbm2ddl.auto" value="create"/> <property name="hibernate.show_sql" value="true"/> <property name="hibernate.format_sql" value="true"/> </properties> </persistence-unit> </persistence> The DAO method to save my domain object looks like this: @Transactional(propagation=Propagation.REQUIRES_NEW) protected final T saveOrUpdate (T model) { EntityManager em = emf.createEntityManager ( ); EntityTransaction trans = em.getTransaction ( ); System.err.println ("Transaction isActive () == " + trans.isActive ( )); if (em != null) { try { if (model.getId ( ) != null) { em.persist (model); em.flush (); } else { em.merge (model); em.flush (); } } finally { em.close (); } } return (model); } So I try to save a copy of my Group object using the following code in my test case: context = new ClassPathXmlApplicationContext(configs); dao = (GroupDao)context.getBean("groupDao"); dao.saveOrUpdate (new Group ()); This bombs with the following exception: javax.persistence.TransactionRequiredException: no transaction is in progress at org.hibernate.ejb.AbstractEntityManagerImpl.flush(AbstractEntityManagerImpl.java:301) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.orm.jpa.ExtendedEntityManagerCreator$ExtendedEntityManagerInvocationHandler.invoke(ExtendedEntityManagerCreator.java:341) at $Proxy26.flush(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GenericJPADao.saveOrUpdate(GenericJPADao.java:646) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao.save(GroupDao.java:641) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao$$FastClassByCGLIB$$50343b9b.invoke() at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149) at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao$$EnhancerByCGLIB$$7359ba58.save() at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDaoTest.testGroupDaoSave(GroupDaoTest.java:91) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) In addition, I get the following warnings when Spring first starts. Since these reference the entityManagerFactory and the transactionManager, they probably have some bearing on the problem, but I've no been able to decipher them enough to know what: Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'entityManagerFactory' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'entityManagerFactory' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'jpaTransactionManager' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean '(inner bean)' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean '(inner bean)' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'org.springframework.transaction.interceptor.TransactionAttributeSourceAdvisor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.context.support.AbstractApplicationContext$BeanPostProcessorChecker postProcessAfterInitialization INFO: Bean 'org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying) Mar 11, 2010 12:19:27 PM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@37003700: defining beans [groupDao,org.springframework.beans.factory.annotation.RequiredAnnotationBeanPostProcessor,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor,entityManagerFactory,jpaTransactionManager,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.interceptor.TransactionAttributeSourceAdvisor]; root of factory hierarchy Does anyone have any idea what I'm missing? I'm totally stumped... Thanks

Read the article

Windows store apps: ScrollViewer with dinamic content

- by Alexandru Circus

I have a scrollViewer with an ItemsControl (which holds rows with data) as content. The data from these rows is grabbed from the server so I want to display a ProgressRing with a text until the data arrives. Basically I want the content of the ScrollViewer to be a grid with progress ring and a text and after the data arrives the content to be changed with my ItemsControl. The problem is that the ScrollViewer does not accept more than 1 element as content. Please tell me how can I solve this problem. (I'm a C# beginner) <FlipView x:Name="OptionPagesFlipView" Grid.Row="1" TabNavigation="Cycle" SelectionChanged="OptionPagesFlipView_SelectionChanged" ItemsSource="{Binding OptionsPageItems}"> <FlipView.ItemTemplate> <DataTemplate x:Name="OptionMonthPageTemplate"> <ScrollViewer x:Name="OptionsScrollViewer" HorizontalScrollMode="Disabled" HorizontalAlignment="Stretch" VerticalScrollBarVisibility="Auto"> <ItemsControl x:Name="OptionItemsControl" ItemsSource="{Binding OptionItems, Mode=OneWay}" Visibility="Collapsed"> <ItemsControl.ItemTemplate> <DataTemplate x:Name="OptionsChainItemTemplate"> <Grid x:Name="OptionItemGrid" Background="#FF9DBDF7" HorizontalAlignment="Stretch"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="*" /> <ColumnDefinition Width="*" /> <ColumnDefinition Width="*" /> <ColumnDefinition Width="*" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions>  <TextBlock Text="Bid" Foreground="Gray" HorizontalAlignment="Left" Grid.Row="0" Grid.Column="0" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="CallBidTextBlock" Text="{Binding CallBid}" Foreground="Blue" HorizontalAlignment="Left" Grid.Row="1" Grid.Column="0" Margin="5,0,5,5" FontSize="18"/>  <TextBlock Text="Ask" Foreground="Gray" HorizontalAlignment="Left" Grid.Row="2" Grid.Column="0" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="CallAskTextBlock" Text="{Binding CallAsk}" Foreground="Blue" HorizontalAlignment="Left" Grid.Row="3" Grid.Column="0" Margin="5,0,5,0" FontSize="18"/>  <TextBlock Text="Last" Foreground="Gray" HorizontalAlignment="Left" Grid.Row="0" Grid.Column="1" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="CallLastTextBlock" Text="{Binding CallLast}" Foreground="Blue" HorizontalAlignment="Left" Grid.Row="1" Grid.Column="1" Margin="5,0,5,5" FontSize="18"/>  <TextBlock Text="Net Ch" Foreground="Gray" HorizontalAlignment="Left" Grid.Row="2" Grid.Column="1" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="CallNetChTextBlock" Text="{Binding CallNetChange}" Foreground="{Binding CallNetChangeForeground}" HorizontalAlignment="Left" Grid.Row="3" Grid.Column="1" Margin="5,0,5,5" FontSize="18"/>  <TextBlock Text="Strike" Foreground="Gray" HorizontalAlignment="Center" Grid.Row="1" Grid.Column="2" FontSize="18" Margin="5,0,5,0"/> <Border Background="{Binding StrikeBackground}" HorizontalAlignment="Center" Grid.Row="2" Grid.Column="2" Margin="5,0,5,5"> <TextBlock x:Name="StrikeTextBlock" Text="{Binding Strike}" Foreground="Blue" FontSize="18"/> </Border>  <TextBlock Text="Last" Foreground="Gray" HorizontalAlignment="Right" Grid.Row="0" Grid.Column="3" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="PutLastTextBlock" Text="{Binding PutLast}" Foreground="Blue" HorizontalAlignment="Right" Grid.Row="1" Grid.Column="3" Margin="5,0,5,5" FontSize="18"/>  <TextBlock Text="Net Ch" Foreground="Gray" HorizontalAlignment="Right" Grid.Row="2" Grid.Column="3" FontSize="18" Margin="5,0,5,0"/> <TextBlock x:Name="PutNetChangeTextBlock" Text="{Binding PutNetChange}" Foreground="{Binding PutNetChangeForeground}" HorizontalAlignment="Right" Grid.Row="3" Grid.Column="3" Margin="5,0,5,5" FontSize="18"/>  <TextBlock Text="Bid" Foreground="Gray" HorizontalAlignment="Right" Grid.Row="0" Grid.Column="4" FontSize="18" Margin="5,0,15,0"/> <TextBlock x:Name="PutBidTextBlock" Text="{Binding PutBid}" Foreground="Blue" HorizontalAlignment="Right" Grid.Row="1" Grid.Column="4" Margin="5,0,15,5" FontSize="18"/>  <TextBlock Text="Ask" Foreground="Gray" HorizontalAlignment="Right" Grid.Row="2" Grid.Column="4" FontSize="18" Margin="5,0,15,0"/> <TextBlock x:Name="PutAskTextBlock" Text="{Binding PutAsk}" Foreground="Blue" HorizontalAlignment="Right" Grid.Row="3" Grid.Column="4" Margin="5,0,15,5" FontSize="18"/>  <Rectangle Fill="Black" Height="1" Grid.ColumnSpan="5" VerticalAlignment="Bottom" Grid.Row="3"/> </Grid> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl>  </ScrollViewer> </DataTemplate> </FlipView.ItemTemplate>

Read the article

Nested <a> and <span> challenge

- by PaddyO

Hi all, Trying in vain to get a nested link working within a nested span. This is a working test page for the code below to explain what I'm trying to do. Any ideas on how to get this working in valid html? I guess it's either a nesting order or style syntax thing but I am at a loss. Any thoughts much appreciated. <div id="greyback"> <ul id="scrollbox"> <li class="listcat">List header</li> <li><a class="menu" href="#freeze">List item 1<span><b>This text has popped up because you have clicked the list item, which has an "a" tag and now has :focus. That "a" tag is the first of two.</b><br><br>What I am trying to do is to set the second "a" tag as a DIFFERENT "embedded" link in this box<span style="color: blue; background-color: yellow;">eg, here<a href="http://www.conservationenterprises.com" target="blank">This is the second (nested) "a" tag in this html nest. It is a link to an external site. Instead of this being an always-visible link, I want it to sit within the yellow box in the first span (click the List item 1 to display).</a></span> </a></span> </li> </a></span> </li> </ul> </div> and the CSS: #scrollbox {margin: 0 auto; margin-top: 1em; margin-bottom: 1em; width:19em; height:auto; max-height: 21em; overflow:auto; border-bottom: 0.1em solid #FFA500; border-top: 0.1em solid #FFA500;} #scrollbox a {float: left; color:#000000; text-decoration:none; width:18em; height: auto; margin-bottom: 0.5em; font-family: Arial, sans-serif; font-size: 0.9em; text-align:left;} #scrollbox a.menu {} #scrollbox a span {display:none; position:absolute; left:0em; top:0;} #scrollbox a span img {float: right; border:0; max-width:7.5em;} #scrollbox a:hover {border: 0; color: #7ebb11; font-size:0.9em;} #scrollbox a:hover span {border: 0; color: #535353;} #scrollbox a span:focus {color: blue;} #scrollbox a:active {border:none; color: #535353; text-decoration: none;} #scrollbox a:focus {border:0em solid #000; outline:0;} #scrollbox a:active span, #scrollbox li a:active span, #scrollbox a:focus span, #scrollbox li a:focus span {display: block; width: 52.5em; min-height: 20em; height: auto; left: 1.5em; top:18em; z-index:10; font-size:0.9em; text-align: left; padding: 1em; padding-bottom: 0em; background-color: #c3FFe3; color: #535353; border: solid #FFA500 0.25em;} #scrollbox li a:active span span, #scrollbox li a:focus span span{display: block; width: auto; height: auto; min-height: 2em; left: 25em; top:10em; z-index:10; font-size:0.9em; text-align: left; padding: 1em; padding-bottom: 0em; background-color: transparent; color: #535353; border: dashed red 1px;} .ul#scrollbox {padding-left: 0.1em;} #scrollbox li {float:left; list-style: none; background: url(blank.png) no-repeat left center; margin-left: 0em; font-family:Arial, sans-serif; font-size: 0.9em;} #scrollbox li.listcat {float: left; text-align:left; width: 18em; margin-left: 0em; margin-top: 0.1em; margin-bottom: 0.3em; padding-top:0.5em; color: green; font-size: 0.9em; font-weight:bold;} Cheers Patrick.

Read the article

Double default gateway ubuntu server

- by Elena

Hi, I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

Read the article

How can I do Ubuntu Lucid Desktop installation with HTTP preseed?

- by netvope

Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

Read the article

configuring two network interfaces in ubuntu 10.04.1

- by Bill Smith

I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

Read the article

How can I do Ubuntu Lucid Desktop installation with HTTP preseed file and desktop installation CD?

- by netvope

Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What am I missing? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct. Any ideas?

Read the article

Double default gateway ubuntu server

- by Elena

I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

Read the article

Cisco 2811 router ignored input errors

- by elbekay

I've got a Cisco 2811 (AdvIPServices 12.4(25e)) that is showing input errors on both its interfaces, all the errors are of the ignored type. The counter for ignore errors is not increasing continuously, which made me think it would be happening in line with traffic bursts, but there really isn't a large amount of traffic running through it at any time. Both the router interfaces are connected to a 4900 (IPBase 12.2(54)) series switch. The only things I can see are: There is a slight mismatch in duplex/speed negotiation settings, one side is set to auto/auto and one full/auto, however they have negotiated fine. There have been a few fallbacks on the interface buffers, and some trims in the public buffers. Any suggestions for things to look at? I will be correcting the duplex neg settings, and might try a buffer tune, but I don't think it will help.

Read the article

How can I anchor a textbox in wpf ?

- by csuporj

I have a window with tabs. On one of the tabs, I have a layout like below. (In fact it is more complicated, I have 4 text boxes in a row, and I have more rows.) How can I make the 3rd textbox have the width of the label + the width of the text box above, that is, to have them properly aligned ? The problem is that WPF widens the 3rd textbox, when I type text into it. Using hardcoded numbers for the sizes defeats the whole purpose of WPF. I could do that way 10 times faster in Windows Forms than in WPF. Is there a better way, than using a grid for each set of consecutive small text boxes, having to skip the large ones from the grid, because putting them in messes up everything. <Window x:Class="WpfApplication1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <Window.Resources> <Style TargetType="{x:Type Label}"> <Setter Property="VerticalAlignment" Value="Center"/> </Style> <Style TargetType="{x:Type TextBox}"> <Setter Property="VerticalAlignment" Value="Center"/> <Setter Property="Margin" Value="3"/> </Style> <Style x:Key="SmallTextBox" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}"> <Setter Property="Width" Value="50"/> </Style> </Window.Resources> <StackPanel VerticalAlignment="Top" HorizontalAlignment="Left" Width="{Binding ElementName=grid,Path=ActualWidth}" Grid.IsSharedSizeScope="True"> <Grid Name="grid" HorizontalAlignment="Left"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" SharedSizeGroup="c1"/> <ColumnDefinition Width="Auto" SharedSizeGroup="c2"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Label Content="Foo:"/> <TextBox Grid.Column="1" Style="{StaticResource SmallTextBox}"/> <Label Grid.Row="1" Content="Foobar:"/> <TextBox Grid.Row="1" Grid.Column="1" Style="{StaticResource SmallTextBox}"/> </Grid> <TextBox Grid.Row="1"/> <Grid Name="grid2" HorizontalAlignment="Left"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" SharedSizeGroup="c1"/> <ColumnDefinition Width="Auto" SharedSizeGroup="c2"/> </Grid.ColumnDefinitions> <Label Content="Bar:"/> <TextBox Grid.Column="1" Style="{StaticResource SmallTextBox}"/> </Grid> </StackPanel> </Window>

Read the article

How to set up dual quadro cards on RHEL 5.5?

- by Alex J. Roberts

I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

Read the article

ubuntu-10.04-desktop-i386 does not work with HTTP preseed?

- by netvope

Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

Read the article

How do I make vim's autoindent not drop trailing spaces?

- by Joey Adams

In some text editors (e.g. Kate, gedit), when auto indent is enabled, pressing return twice will leave a trailing whitespace (which I want): if (code) { .... ....| } While others cater to the coding standard where trailing spaces (even in blank lines) aren't allowed: if (code) { ....| } What annoys me about this is that if I arrow up after auto-indenting, the auto-indent is lost: if (code) { | .... } If I run vim and :set autoindent , I get the latter behavior. My question is, how do I set vim to keep the trailing spaces rather than automatically removing them if they go unused?

Read the article

How to assign default values and define unique keys in Entity Framework 4 Designer

- by csharpnoob

Hello, I've had a look at the Entity Framework 4. While generating code for the SQL Server 2008 I came to the point where I want to define some default values for some fields. how to define in the designer for a Created DateTime Field the DateTime.Now default value? - Error 54: Default value (DateTime.Now) is not valid for DateTime. The value must be in the form 'yyyy-MM-dd HH:mm:ss.fffZ' how to make for code generation a string Field unique. Like E-Mail or Username can exists only once in the table. I've search alot in the internet and also checked my books Pro Entity Framework 4.0 and Programming Entity Framework. But none of them seems to come up with the default value issue, or using sql commands as default values for database generation. Another thing is, how to prevent on database generation always from droping tables? Instead i want to append non existing fields and keep the data. Thanks for any suggestions.

Read the article

PostgreSQL 9: Does Vacuuming a table on the primary replicate on the mirror?

- by Scott Herbert

Running PostgreSQL 9.0.1, with streaming replication keeping one read-only mirror instance up to date. Auto-vaccuum is on on the primary, except for a few tables which are not vacuumed by the auto-vacuum daemon, in an effort to reduce business-hour IO. These tables are "materialised views". Each night at midnight, we run a vacuum across the database in order to clean up those tables that are excluded from the auto-vacuum. I'm wondering if that process replicates across to the mirror, or if I need to set up vacuum on the mirror as well?

Read the article

AWS Elastic load balancer doesn't decrease instances from Alarm Trigger

- by jchysk

I have a load balancer that I created an auto-scaling-group and launch-config for. I created the auto-scaling-group with a min-size of 1 and max size of 20. I have a scaledown policy: as-put-scaling-policy SBMScaleDownPolicy --auto-scaling-group SBMAutoScaleGroup --adjustment=-1 --type ChangeInCapacity --cooldown 300 Then I set up an alarm: mon-put-metric-alarm SBMLowCPUAlarm --comparison-operator LessThanThreshold --evaluation-periods 1 --metric-name CPUUtilization --namespace "AWS/EC2" --period 600 --statistic Average --threshold 35 --alarm-actions arn:aws:autoscaling:us-east-1:policystuffhere:autoScalingGroupName/SBMAutoScaleGroup:policyName/SBMScaleDownPolicy --dimensions "AutoScalingGroupName=SBMAutoScaleGroup" When average CPU usage over 10 minutes is under 35, in CloudFront the alarm shows up as "In Alarm State" but doesn't decrease the number of instances. Also, if there's only one instance running it'll spin up another to 2 even if a scale up alarm isn't hit. It seems like the default value is just set to 2 somehow. How can I change this?

Read the article

NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

- by rism

I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

Read the article

How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

- by netvope

Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

Read the article

What's the .proto equivalent of List<T> in protobuf-net?

- by Marc Bollinger

To keep some consistency, we use code generation for a lot of our object models, and one of the offshoots of that has been generating the .proto files for ProtocolBuffers via a separate generation module. At this point though, I'm stumped at how to implement the generation for when it happens upon a List<T> object. It looks like this is possible via contracts: [ProtoMember(1)] public List<SomeType> MyList {get; set;} but outside of that, I'm not sure how or if it's possible to do this only from creating the .proto file/using the VS custom tool. Any thoughts?

Read the article

WPF Issues with Control Layout

- by Brett Powell

I am making an application that connects to our billing software using its API, and I am running into a few issues getting the layout working properly. I want to make it so that when one of the expanders is minimized, the other window fills the gap, and when it is expanded again the other expander goes back to where it was. Right now when the arrow is clicked on one, there is just an empty gap. I used a DockPanel as the parent which I assumed would automatically do this, but it isn't working. Second question, is there a way to make these areas resizable? I don't want to try and get too frisky with allowing the user to undock the menus (don't even know if that is possible with just straight WPF) but it would be nice if they could change the width/height of them. Also, just a newbie question to C#, but what is the equivalent of a C++ header file? It looks like you just use .cs files, but I am not sure. I want to extract all of my functions that pull the data from the billing software and put them into a different file to clean up the code. Here is my XAML... <Window x:Class="WpfApplication3.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Billing Management" Height="550" Width="754" xmlns:shared="http://schemas.actiprosoftware.com/winfx/xaml/shared" WindowStartupLocation="CenterScreen" WindowStyle="ThreeDBorderWindow"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="22" /> <RowDefinition /> </Grid.RowDefinitions> <Menu Height="22" Name="menu1" Margin="0" HorizontalAlignment="Stretch" VerticalAlignment="Top" HorizontalContentAlignment="Left" IsEnabled="True" IsMainMenu="True"> <MenuItem Header="_File"> <MenuItem Header="_Open" /> <MenuItem Header="_Close" /> <Separator/> <MenuItem Header="_Exit" /> </MenuItem> </Menu> <TabControl Name="tabControl1" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" BorderThickness="1" Padding="0" TabStripPlacement="Bottom" UseLayoutRounding="False" FlowDirection="LeftToRight" Grid.Row="1"> <TabItem Header="Main" Name="tabItem1" Margin="0"> <DockPanel Name="dockPanel1" LastChildFill="True"> <ListBox Height="100" Name="listBox3" DockPanel.Dock="Top" /> <ListBox Name="listBox4" Width="200" DockPanel.Dock="Right" /> <DockPanel Height="Auto" Name="dockPanel2" Width="Auto" VerticalAlignment="Stretch" LastChildFill="True"> <shared:AnimatedExpander Header="Staff Online" Width="200" Name="expanderStaffOnline" IsExpanded="True" Height="194" BorderThickness="0" DockPanel.Dock="Top" VerticalContentAlignment="Stretch"> <ListBox Name="listboxStaffOnline" Width="Auto" Height="Auto" Margin="0" VerticalAlignment="Stretch" Loaded="listboxStaffOnline_Loaded" /> </shared:AnimatedExpander> <shared:AnimatedExpander Header="Test Menu 2" Height="Auto" Name="animatedExpander1" BorderThickness="1" Margin="0,0,0,0" IsExpanded="True" VerticalContentAlignment="Stretch"> <ListBox Height="Auto" HorizontalAlignment="Stretch" Name="listBox6" VerticalAlignment="Stretch" Margin="0" BorderThickness="1" /> </shared:AnimatedExpander> </DockPanel> <ListBox Height="100" Name="listboxAdminLogs" DockPanel.Dock="Bottom" Loaded="listboxAdminLogs_Loaded" /> <ListBox Name="listBox5" /> </DockPanel> </TabItem> <TabItem Header="Support" Name="tabItem2" Margin="0"> </TabItem> <TabItem Header="Clients" /> <TabItem Header="Billing" /> <TabItem Header="Orders" /> </TabControl> </Grid> </Window>

Read the article

Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

- by Linux Guy

I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

Search Results

Search found 9667 results on 387 pages for 'auto generation'.

Page 96/387 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >

- by dragonfly

- by DunlopBurns

- by Dasa

- by blackessej

- by Steve

- by Alexandru Circus

- by PaddyO

- by Elena

- by netvope

- by Bill Smith

- by netvope

- by Elena

- by elbekay

- by csuporj

- by Alex J. Roberts

- by netvope

- by Joey Adams

- by csharpnoob

- by Scott Herbert

- by jchysk

- by rism

- by netvope

- by Marc Bollinger

- by Brett Powell

- by Linux Guy

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >