Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 96/301 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

  - by Christopher Galpin

  I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

  Read the article

• uTorrent error: Access is denied

  - by Ben Franchuk

  When I booted my computer today and opened up uTorrent it went on, as usual, to check the torrents that I had been running before. On one it returned an "Access is denied" error after it had been checked. I have absolutely no idea why this is happening as I was downloading the same torrent just the night before, and additionally because I have other torrents going in the same downloads folder and they do not have any such errors. It may be worth noting that on said defective torrent, there appear to be no seeds and no connected peers (of the 33 available) and three of the trackers appear to be inactive as well (those being Peer Exchange, Local Peer Discovery and DHT). I have rebooted a few times in an attempt to fix this problem, but to no success. I also tried a few times force rechecking / force starting but neither of those worked either. edit I booted today and it was working for whatever reason. thanks for all of the help anyways guys!

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• Do memory cards have any max file size limitation?

  - by Dmitriy R

  I am not sure where to ask this question, so perhaps it is physical limitation. I have a 8 GB flash micro SD memory card. When I copy any file size of up to few gigabytes, copying happens normally. But if I am trying to copy file over 4 GB file, then the system tells me like insufficient memory on card, although 8 GB is available. So perhaps only 32 bit address is used for keeping size of file in micro SD card, or is my micro SD defective?

  Read the article

• Opening notebooks

  - by Plastkort

  I have a Compaq CQ40 which has a defective CPU fan, it seems unable to cool the notebook enough at this time, it is constantly running, and if you move the pc up/down to look under it, it makes some sort of chainsaw sound. I have tried to take out all the screws underneath, but I still have a problem with the plastic cover on the above; I am afraid I might break it since it seem to be connected with plastic clips underneath. I have fixed notebooks before, but this one seem new, how can I open the plastic cover above without breaking it? Any advice, tips and tricks would be so nice to have, not only for this notebook, but any future notebook also I might need to repair. It would be nice if anyone here knows a place with video tutorials on this subject as well.

  Read the article

• Manual vmware image creation

  - by Gzorg

  A laptop hard disk is being defective, but I managed to be lucky enough to get access to it, using an Ubuntu live cd. Now, I think it would be nice to dump the whole thing, using, for instance, a combination of gzip and split. But that would make the resulting files unusable. I could make a VMware image of it instead. I'm currently looking for the answer, which involves finding how vmware manages fixed size virtual partitions, but maybe you already did this before. Thanks.

  Read the article

• Chennai Metro Water [Indian Websites]

  - by samsudeen

  If you are living in Chennai definitely you will have this question in your mind “Does Chennai 0survive this summer without any water crisis?”. The Chennai Metro Water maintains a website where in you can know all the details about the water storage, supply. This site has all the information about water supply  especially matters for  Chennai residents. I have given some of the uses of this site Water Sewer Application Status If you are a new resident and applied for water sewer application status. You can check your application (Water Sewer Application Status) by entering your WA No (Water Application No). You can also download all the required application forms. Register Complaints You can register complaints (Register Complaints) about  water supply / defective water meter and sewage blocking online. Pay Water & Sewage Tax You can pay your water & sewage tax (Pay Tax) online including the dues /arrears if any left out. Lake Level This site also maintains the current (Lake Level) and historic water levels of the Chennai water reservoirs including the daily inflow /out flow of water. You can also know the daily / month rainfall levels of these water reservoirs from 1965 onwards. Hope this  information little  useful for those who are planning / building a new house in Chennai corporation. Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• What if &ldquo;Microsoft&rdquo; were in our shoes? About Windows Phone

  - by Vijaya Malla

  This is what I think about Microsoft Windows Phone. If Microsoft were in our shoes looking at various phones available their configurations, memory, front facing cameras etc. Microsoft disappointed the USA customer base again by not getting Nokia Lumia 800. The Past: If we talk few years ago, few business people were on their Blackberry’s and few Gadget lovers were on crappy Windows OS devices. The world was all going right till Apple came with a revolutionary device iPhone, which completely changed our perception towards phone and how great a smartphone can be. It’s not just phone but the whole technology industry. The romantic appealing of the phone and smooth touch and feel of it made everyone to get one of those bad boys. The sales went up for not just Apple for AT&T too. Even though everyone complained about the signal strength of AT&T, everyone wanted to be on it because they have iPhones. All world wanted iPhone back then except Microsoft with few comments on how it is not going to be in market. But it did great and rocked the industry. A few years later with iPhone and Android taking over the smartphone market Microsoft realized that it should be in the game too. Worked on the design of it, and gave us the best Mobile OS ever. Everyone thinks that iOS is a great OS for phones but if you have touched a Windows Phone and use it for real then you will realize the strengths of it. so last year we welcomed Windows Phone 7 The Present : Windows Phone 7 has the fastest growing market. The phones are cheap, you can buy from any carrier out there. The phone became smarter and smarter with the recent update “Mango (7.5)” and with the collaboration with Nokia, Microsoft created a new eco-system for smartphones with the best smartphone hardware and best smartphone software. Everyone in the world was excited about the collaboration. As we fly over cloud 9 imagining about Nokia made Windows Phones we all heard a good news from Nokia “Nokia World”. Nokia showed the world what a best hardware making company can do with Windows Phone 7.5 OS. Nokia Lumia 800 and 710 took the spotlight. Everyone here in USA and all over the world wanted to own a Nokia Lumia 800 because of the design, software, proprietary apps from Nokia (maps, ESPN, drive and music). If USA market had Nokia Lumia 800, then it would have been the best step Microsoft and Nokia had ever made in their history of smartphone market. With all the numbers going to Android and IPhone, its not clear on why Microsoft/Nokia did not release Lumia 800 here in USA. Its unclear if Microsoft had learnt the lesson or not. if it had learnt the lesson I guess Microsoft needs to get the Nokia Lumia 800 to the USA. The Future: This is where we hope we get the best form Microsoft. I was an iPhone user, I used 2G, 3G, 3GS, 4 and then moved to Windows Phone and never felt so happy with my iPhones’. From the day when Nokia announced the partnership with Microsoft and said that they going to come up with a new Nokia windows phone, I was dreaming for my Nokia Phone. but looks like it is not going to happen any time soon. My thoughts about the Market :  Nokia has the biggest market base in the world. Even though people moved to Android or iPhone over the years in other parts of the world like India and China, people still love to use Nokia. Everyone who uses a Windows Phone now will wait for that day when Nokia Lumia comes to the USA but what either or both of the companies should do for a better market share is to make a very aggressive move with the hardware and bet on the devices. I am pretty sure that it will work. everyone here in the USA will like to have a dual core windows phone with front facing camera and all other crazy things that android/apple phones offer. I think we just have to wait for that day and hope that day comes soon. Love Microsoft and Nokia Thank you for reading.

  Read the article

• Ask the Readers: Backing Your Files Up – Local Storage versus the Cloud

  - by Asian Angel

  Backing up important files is something that all of us should do on a regular basis, but may not have given as much thought to as we should. This week we would like to know if you use local storage, cloud storage, or a combination of both to back your files up. Photo by camknows. For some people local storage media may be the most convenient and/or affordable way to back up their files. Having those files stored on media under your control can also provide a sense of security and peace of mind. But storing your files locally may also have drawbacks if something happens to your storage media. So how do you know whether the benefits outweigh the disadvantages or not? Here are some possible pros and cons that may affect your decision to use local storage to back up your files: Local Storage Pros You are in control of your data Your files are portable and can go with you when needed if using external or flash drives Files are accessible without an internet connection You can easily add more storage capacity as needed (additional drives, etc.) Cons You need to arrange room for your storage media (if you have multiple externals drives, etc.) Possible hardware failure No access to your files if you forget to bring your storage media with you or it is too bulky to bring along Theft and/or loss of home with all contents due to circumstances like fire If you are someone who is always on the go and needs to travel as lightly as possible, cloud storage may be the perfect way for you to back up and access your files. Perhaps your laptop has a hard-drive failure or gets stolen…unhappy events to be sure, but you will still have a copy of your files available. Perhaps a company wants to make sure their records, files, and other information are backed up off site in case of a major hardware or system failure…expensive and/or frustrating to fix if it happens, but once again there is a nice backup ready to go once things are fixed. As with local storage, here are some possible pros and cons that may influence your choice of cloud storage to back up your files: Cloud Storage Pros No need to carry around flash or bulky external drives All of your files are accessible wherever there is an internet connection No need to deal with local storage media (or its’ upkeep) Your files are still safe if your home is broken into or other unfortunate circumstances occur Cons Your files and data are not 100% under your control Possible hardware failure or loss of files on the part of your cloud storage provider (this could include a disgruntled employee wreaking havoc) No access to your files if you do not have an internet connection The cloud storage provider may eventually shutdown due to financial hardship or other unforeseen circumstances The possibility of your files and data being stolen by hackers due to a security breach on the part of your cloud storage provider You may also prefer to try and cover all of the possibilities by using both local and cloud storage to back up your files. If something happens to one, you always have the other to fall back on. Need access to those files at or away from home? As long as you have access to either your storage media or an internet connection, you are good to go. Maybe you are getting ready to choose a backup solution but are not sure which one would work better for you. Here is your chance to ask your fellow HTG readers which one they would recommend. Got a great backup solution already in place? Then be sure to share it with your fellow readers! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know Winter Sunset by a Mountain Stream Wallpaper Add Sleek Style to Your Desktop with the Aston Martin Theme for Windows 7 Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0

  Read the article

• SQL SERVER – Weekend Project – Experimenting with ACID Transactions, SQL Compliant, Elastically Scalable Database

  - by pinaldave

  Database technology is huge and big world. I like to explore always beyond what I know and share the learning. Weekend is the best time when I sit around download random software on my machine which I like to call as a lab machine (it is a pretty old laptop, hardly a quality as lab machine) and experiment it. There are so many free betas available for download that it’s hard to keep track and even harder to find the time to play with very many of them.  This blog is about one you shouldn’t miss if you are interested in the learning various relational databases. NuoDB just released their Beta 7.  I had already downloaded their Beta 6 and yesterday did the same for 7.   My impression is that they are onto something very very interesting.  In fact, it might be something really promising in terms of database elasticity, scale and operational cost reduction. The folks at NuoDB say they are working on the world’s first “emergent” database which they tout as a brand new transitional database that is intended to dramatically change what’s possible with OLTP.  It is SQL compliant, guarantees ACID transactions, yet scales elastically on heterogeneous and decentralized cloud-based resources. Interesting note for sure, making me explore more. Based on what I’ve seen so far, they are solving the architectural challenge that exists between elastic, cloud-based compute infrastructures designed to scale out in response to workload requirements versus the traditional relational database management system’s architecture of central control. Here’s my experience with the NuoDB Beta 6 so far: First they pretty much threw away all the features you’d associate with existing RDBMS architectures except the SQL and ACID transactions which they were smart to keep.  It looks like they have incorporated a number of the big ideas from various algorithms, systems and techniques to achieve maximum DB scalability. From a user’s perspective, the NuoDB Beta software behaves like any other traditional SQL database and seems to offer all the benefits users have come to expect from standards-based SQL solutions. One of the interesting feature is that one can run a transactional node and a storage node on my Windows laptop as well on other platforms – indeed interesting for sure. It’s quite amazing to see a database elastically scale across machine boundaries. So, one of the basic NuoDB concepts is that as you need to scale out, you can easily use more inexpensive hardware when/where you need it.  This is unlike what we have traditionally done to scale a database for an application – we replace the hardware with something more powerful (faster CPU and Disks). This is where I started to feel like NuoDB is on to something that has the potential to elastically scale on commodity hardware while reducing operational expense for a big OLTP database to a degree we’ve never seen before. NuoDB is able to fully leverage the cloud in an asynchronous and highly decentralized manner – while providing both SQL compliance and ACID transactions. Basically what NuoDB is doing is so new that it is all hard to believe until you’ve experienced it in action.  I will keep you up to date as I test the NuoDB Beta 7 but if you are developing a web-scale application or have an on-premise app you are thinking of moving to the cloud, testing this beta is worth your time. If you do try it, let me know what you think.  Before I say anything more, I am going to do more experiments and more test on this product and compare it with other existing similar products. For me it was a weekend worth spent on learning something new. I encourage you to download Beta 7 version and share your opinions here. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Introducing Oracle System Assistant

  - by B.Koch

  by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• F# and the rose-tinted reflection

  - by CliveT

  We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Are programmers a bunch of heartless robots who are lacking of empathy? [closed]

  - by Graviton

  OK, the provocative title got your attention. My experience as a programmer and dealing with my fellow programmers is that, a programmer is also usually someone who is so consumed by his programming work, so absorbed in his algorithmic construction that he has little passion/ time left for anything else, which includes empathy for other people, love and care for the people whom he love or should love ( such as their spouses, parents, kids, colleagues etc). The better a person is in terms of his programming powers, the more defective he is in terms of love/care because both honing programming skills and loving the surrounding takes time and one has only so much time to be allocated among so many different things. Also, programming ( especially INTERESTING programming job, like, writing an AI to predict the future search trend) is a highly consuming job; it doesn't just consume you from 9 to 5, it will also consume you after 5 and practically every second of your waking hours because a good programmer can't just magically switch off his thinking hat after the office lights go off ( If you can then I don't really think you are a passionate programmer, and the prerequisite of a good programmer is passion). So, a good programmer is necessarily someone who can't love as much as others do because the very nature of the programming job prevents him from loving others as much as he wants to. Do you concur with my observation/ reasoning?

  Read the article

• Oracle Database Upcoming Event dates to know

  - by mandy.ho

  February may be a short month, but it's not short of exciting Oracle events. From information packed "Real Performance Days" to participation in one of the biggest IT Security events - look out for Oracle Database and let us know if you are there with us! Feb 13-18, 2011 - Las Vegas, NV TDWI World Conference Series Join Oracle in highlighting Exadata x2-2 and x2-8, along with Oracle Business Intelligence, Enterprise Performance management and Data Warehousing solutions. Oracle will be presenting a workshop - Oracle Data Integration: Best-of-Breed Solutions for the Enterprise Wednesday, February 16, 2011 7p.m - 9p.m Glen Goodrich, Director of Product Management Christophe Dupupet, Director of Product Management, Data Integration http://events.tdwi.org/events/las-vegas-world-conference-2011/sessions/session-list.aspx Feb 14-17, 2011 - Barcelona, Spain Mobile World Congress MWC is an event where Oracle showcases the near complete breadth and depth of value that our Communications Industry strategy and Hardware and Software Solutions can deliver. Oracle supports Communications Service Providers today and delivers platforms and flexibility primed for the future. Oracle will have a two story Pavilion, along with an Oracle Java and Embedded Solutions Center - App Planet. The Exhibition times are Monday, 14th February 09.00 - 19.00 Tuesday, 15th February 09.00 - 19.00 Wednesday, 16th February 09.00 - 19.00 Thursday, 17th February 09.00 - 16.00 Have questions? Meet with Oracle Sales representatives at the Oracle Café. Open every day from 9am to 17:00pm. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=109912&src=6973382&src=6973382&Act=4 Feb 14-18, 2011 - San Francisco, CA RSA Conference As the world's most complete, open, integrated business software and hardware systems provider, Oracle can uniquely safeguard your information throughout its entire lifecycle. Learn more by attending these sessions: Cloud Computing: A Brave New World for Security and Privacy (CLD-201) Wednesday, February 16 at 8:30 a.m. Databases Under Attack - Securing Heterogeneous Database Infrastructures (DAS-301) Thursday, February 17, 2011 at 8:30 a.m. Seven Steps to Protecting Databases (DAS-402) Friday, February 18 at 10:10 a.m. RSA Conference Attendees will also have the opportunity to meet with Oracle Security Solution experts, see live product demos and more by visiting booth # 1559. Hours: Monday, February 14, 6:00 p.m. - 8:00 p.m., Tuesday, February 15, 11:00 a.m. - 6:00 p.m. and 4:30 p.m. - 6:00p.m., Wednesday, February 16, 11:00 a.m. - 6:00 p.m., and Thursday, February 17, 11:00 a.m. - 3:00 p.m. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=127657&src=6967733&src=6967733&Act=12 Feb 21-25, 2011 - Various Locations IOUG Presents - A Day of Real World Performance with Tom Kyte, Andrew Holdsworth and Graham Wood These Oracle experts will debate, discuss and delineate the best practices for designing hardware architectures, deploying Oracle databases, and developing applications that deliver the fastest possible performance for your business.Topics are covered in a conversational format - with all three chiming in where appropriate. Each presenter has their own screen projector to demonstrate their individual points to the participants. Customers will have the opportunity to get their specific performance/tuning questions answered and learn how to balance all the different environmental requirements for their applications to improve performance. Register today for the following dates and locations • February 21 in San Diego, CA • February 22 in Los Angeles, CA • February 23 in Seattle, WA • February 25 in Phoenix, AZ http://www.ioug.org/tabid/194/Default.aspx Feb 8-24 - Various Oracle Enterprise Cloud Summit This series of full-day events with cloud experts, sharing real-world best practices, reference architectures and more continues during the month of February. Attend the Oracle Enterprise Cloud Summit to learn how to: • Build a state-of-the-art cloud architecture • Leverage your existing IT investments • Optimize your IT management processes Whether you are considering a move to cloud computing or have already adopted a cloud model, this event offers you the insights you need to take full advantage of cloud computing. Check below to see if the event is coming to a city near you. http://www.oracle.com/us/corporate/events/cloud-events-214342.html

  Read the article

• DVDs and CDs not recognized

  - by Larry Doyle

  I have Ubuntu 12.04 LTS installed on my computer (Sony Vaio VGN-NS205N). It reads some CDs and DVDs just fine, but many others it will not recognize at all, or will only recognize after opening and closing the CD tray many times. It just shows the cd/dvd drive as being empty and won't show that anything is on there at all. I have a few DVDs (from the same publisher) that work every time. This comes up most often when trying to show my kid Bob the Builder, etc. Some data CDs I would like to work with also have the same issue. It's not a hardware or defective disc problem, since all these will play in Windows on the same machine. It's just really annoying to have to switch operating systems to play videos or get data off discs. All the searches I have done people recommend installing medibuntu and other repositories. I have and they are all up to date. No change. Any help that works would be greatly appreciated.

  Read the article

• Crime Scene Investigation: SQL Server

  - by Rodney Landrum

  “The packages are running slower in Prod than they are in Dev” My week began with this simple declaration from one of our lead BI developers, quickly followed by an emailed spreadsheet demonstrating that, over 5 executions, an extensive ETL process was running average 630 seconds faster on Dev than on Prod. The situation needed some scientific investigation to determine why the same code, the same data, the same schema would yield consistently slower results on a more powerful server. Prod had yet to be officially christened with a “Go Live” date so I had the time, and having recently been binge watching CSI: New York, I also had the inclination. An inspection of the two systems, Prod and Dev, revealed the first surprise: although Prod was indeed a “bigger” system, with double the amount of RAM of Dev, the latter actually had twice as many processor cores. On neither system did I see much sign of resources being heavily taxed, while the ETL process was running. Without any real supporting evidence, I jumped to a conclusion that my years of performance tuning should have helped me avoid, and that was that the hardware differences explained the better performance on Dev. We spent time setting up a Test system, similarly scoped to Prod except with 4 times the cores, and ported everything across. The results of our careful benchmarks left us truly bemused; the ETL process on the new server was slower than on both other systems. We burned more time tweaking server configurations, monitoring IO and network latency, several times believing we’d uncovered the smoking gun, until the results of subsequent test runs pitched us back into confusion. Finally, I decided, enough was enough. Hadn’t I learned very early in my DBA career that almost all bottlenecks were caused by code and database design, not hardware? It was time to get back to basics. With over 100 SSIS packages and hundreds of queries, each handling specific tasks such as file loads, bulk inserts, transforms, logging, and so on, the task seemed formidable. And yet, after barely an hour spent with Profiler, Extended Events, and wait statistics DMVs, I had a lead in the shape of a query that joined three tables, containing millions of rows, returned 3279 results, but performed 239K logical reads. As soon as I looked at the execution plans for the query in Dev and Test I saw the culprit, an implicit conversion warning on a join predicate field that was numeric in one table and a varchar(50) in another! I turned this information over to the BI developers who quickly resolved the data type mismatches and found and fixed “several” others as well. After the schema changes the same query with the same databases ran in under 1 second on all systems and reduced the logical reads down to fewer than 300. The analysis also revealed that on Dev, the ETL task was pulling data across a LAN, whereas Prod and Test were connected across slower WAN, in large part explaining why the same process ran slower on the latter two systems. Loading the data locally on Prod delivered a further 20% gain in performance. As we progress through our DBA careers we learn valuable lessons. Sometimes, with a project deadline looming and pressure mounting, we choose to forget them. I was close to giving into the temptation to throw more hardware at the problem. I’m pleased at least that I resisted, though I still kick myself for not looking at the code on day one. It can seem a daunting prospect to return to the fundamentals of the code so close to roll out, but with the right tools, and surprisingly little time, you can collect the evidence that reveals the true problem. It is a lesson I trust I will remember for my next 20 years as a DBA, if I’m ever again tempted to bypass the evidence.

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Intermittent internet connectivity

  - by Rob Oplawar

  UPDATED: I recently built a new computer and set it up to dual-boot Windows 7 and Ubuntu 11.10. In Windows, using the same hardware, my LAN connectivity is solid. In Ubuntu, however, my network interface periodically dies and resets itself; I'll have a solid connection for 30 seconds, and then it will go out for 30 seconds. When I tail the log: tail -f /var/log/kern.log I see "eth0 link up" messages appear periodically, corresponding with the return of connectivity. I posted the original question months ago, and misinterpreted what was going on. With a working Internet connection in Windows, I ignored the problem for some months. See my answer below for the solution (drivers). ORIGINAL POST In Ubuntu, although I maintain a solid connection to my LAN (pinging the router IP address consistently returns a good result), my internet connectivity drops in and out. When I continuously ping 74.125.227.18 (a google.com server), I get responses for a while, then I start getting "Destination Host Unreachable" for a while, then I get responses again. This happens consistently, dropping the connection for about 30 seconds out of every minute or two. Whether I configure my network via the network manager or via /etc/network/interfaces seems to make no difference. I configure with the following settings: address 192.168.1.101 network 192.168.1.0 gateway 192.168.1.99 (my router's IP address) netmask 255.255.255.0 (confirmed as the right netmask for the router) broadcast 192.168.1.255 (also confirmed with the router). ifconfig confirms that these settings are working: eth0 Link encap:Ethernet HWaddr 50:e5:49:40:da:a6 inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe40:daa6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11557 errors:0 dropped:11557 overruns:0 frame:11557 TX packets:13117 errors:0 dropped:211 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9551488 (9.5 MB) TX bytes:1930952 (1.9 MB) Interrupt:41 Base address:0xa000 I get the same issue when I use automatic DHCP address settings, although I did confirm that there is no other machine on the network with the static IP address I want to use. As I said, the connection to the local network stays solid - I never have any trouble pinging 192.168.1.* - it's internet addresses that I intermittently cannot reach. It's not a DNS issue because pinging known IP addresses directly shows the same behavior. Also, I don't think it's a hardware issue, as I never have any internet connectivity problems on the same machine in Windows. The network hardware is built into the motherboard: Gigabyte Z68XP-UD3P. I managed to bring the OS fully up to date, according to the update manager, but it didn't fix the issue, and with my limited understanding of network architecture I'm at my wit's end. The only clue I can see is that ifconfig is reporting a lot of dropped packets, but I'm not sure what to do about it. UPDATE: It seems my problem is a little more generic than I described; now when I try pinging my router and google simultaneously, they both go unreachable at the same time. Running ifdown eth0 and then ifup eth0 brings it back temporarily; if I just wait it comes back after a couple of minutes. I'll broaden my search through intermittent network connectivity problems.

  Read the article

• Android USB driver for Xperia X10a

  - by mlohbihler

  I've been trying for a couple hours now, and have hit all of the sites Google found, but i cannot get the Android USB driver on my XP box to talk to my new Xperia X10a. I found the lines that some kind soul posted, and has been syndicated repeated, but they don't work for me. The idea is to add them to the Google.NTx86 and Google.NTamd64 sections of the android_winusb.inf file: ;Xperia X10 %SingleAdbInterface% = USB_Install, USB\VID_0FCE&PID_E12E %CompositeAdbInterface% = USB_Install, USB\VID_0FCE&PID_E12E&MI_01 I tried a number of variations of the first line, including "Sony Ericsson X10a", which is what XP shows me in both the "found new hardware" wizard and the device manager, but no luck. The result is always the same. Here are my steps: Plug in the phone via USB "found new hardware wizard" appears Choose "No, not this time" and "next" Choose "Install from a list or specific location..." and "next" Choose "Search for best driver...", check "Include this location...", and browse for the "usb_driver" folder in the Android SDK installation. Click "next" It does a quick search and then says "Cannot install this hardware", "... because the wizard cannot find the necessary software". I've tried more things that i can recall now, including deleting registry entries, but it just won't work. Any help would be appreciated at this point. Regards, m@

  Read the article

• Practical size limitations for RDBMS

  - by grenade

  I am working on a project that must store very large datasets and associated reference data. I have never come across a project that required tables quite this large. I have proved that at least one development environment cannot cope at the database tier with the processing required by the complex queries against views that the application layer generates (views with multiple inner and outer joins, grouping, summing and averaging against tables with 90 million rows). The RDBMS that I have tested against is DB2 on AIX. The dev environment that failed was loaded with 1/20th of the volume that will be processed in production. I am assured that the production hardware is superior to the dev and staging hardware but I just don't believe that it will cope with the sheer volume of data and complexity of queries. Before the dev environment failed, it was taking in excess of 5 minutes to return a small dataset (several hundred rows) that was produced by a complex query (many joins, lots of grouping, summing and averaging) against the large tables. My gut feeling is that the db architecture must change so that the aggregations currently provided by the views are performed as part of an off-peak batch process. Now for my question. I am assured by people who claim to have experience of this sort of thing (which I do not) that my fears are unfounded. Are they? Can a modern RDBMS (SQL Server 2008, Oracle, DB2) cope with the volume and complexity I have described (given an appropriate amount of hardware) or are we in the realm of technologies like Google's BigTable? I'm hoping for answers from folks who have actually had to work with this sort of volume at a non-theoretical level.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >