Search Results

Search found 7850 results on 314 pages for 'except'.

Page 96/314 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Sonicwall Enhanced With One-To-One NAT, Firewall Blocking Everything

  - by Justin

  Hello, just migrated from a Sonicwall TZ180 (Standard) to a Sonicwall TZ200 (Enhanced). Everything is working except the firewall rules are blocking everything. All hosts are online, and being assigned correct ip addresses. I can browse the internet on the hosts. I am using one-to-one NAT translating public ip addresses to private. 64.87.28.98 -> 192.168.1.2 64.87.28.99 -> 192.168.1.3 etc First order of business is to get ping working. My rule is in the new firewall is (FROM WAN to LAN): SOURCE DESTINATION SERVICE ACTION USERS ANY 192.168.1.2-192.168.1.6 PING ALLOW ALL This should be working, but not. I even tried changing the destination to the public ip addresses, but still no luck. SOURCE DESTINATION SERVICE ACTION USERS ANY 64.87.28.98-64.87.28.106 PING ALLOW ALL Any ideas what I am doing wrong?

  Read the article

• Screen tearing with GeForce 550 Ti

  - by Konair0s

  Recently I switched to the new monitor and graphic card - DELL U2312HM and GeForce GTX 550 Ti. I have problems with screen tearing (like in this picture from Wikipedia). Usually it is somewhere in upper part of the screen. Mainly happens in videos (in flash videos tearing heavier). In games all fine, except in-game videos (sometimes even videos built on game engine), but gameplay itself is clear, even in very fast actions. Connection with DVI. Problems both in Linux (Debian GNU/Linux, openSUSE 12.1, Linux Mint 13) and Windows (Windows XP, Windows 7), with various driver versions. 1920x1080, 60Mhz. How can I resolve this?

  Read the article

• How to remove uninstalled programs from Notification Area

  - by ekaj

  For some reason I had 2 instances of Apache running, and I have no idea how. I also had two instances of ApacheMonitor.exe showing in the "Notification Area Icons" place when you right click on your taskbar and go to properties. To fix the multiple instance issue, I deleted Apache completely and uninstalled the service (I did not use the .msi, I install from a .zip). Anyways, Everything from Apache is gone except the two things in the Notification Area Icon page. Does anyone know how to remove these two icons? I have completely uninstalled Apache, cleaned my registry with CCleaner, and rebooted. Does anyone have any other suggestions? Despite what the picture says, I do NOT have Apache installed, and it is not running.

  Read the article

• What does this WinImage Error Mean?

  - by Kryten

  Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

  Read the article

• Web connection speed issue

  - by Iroll750

  I encounter a strange issue with my web (wireless) connection on my laptop (Ubuntu 11.10) I'm able to have 540kbps (down) on all computers in my house (including laptop at the same distance from the box) except me. When i do a speed connection test, i can have this optimal speed immediately after booting. As i surf on the net, watching videos, download things, etc... it becomes slower progressively until 100-110 kbps and the speed remain the same until i reboot. I tried to figure out if a process consume bandwith in background with nethogs but i found nothing suspicious. Any ideas ? Thanks in advance for your help !!

  Read the article

• Use Windows Briefcase from the command line

  - by Daniel

  I have a thumb drive on which I take many of my files with me. I would like to synchronize it with my computer automatically when I connect it. I currently have a script run every time I connect it so that I can do the many things that need to be done when it connects (check for updates to the portable applications, etc.). I want my synchronization utility to: Detect conflicts work correctly when I move files or change the folder structure tell the difference between a file that was deleted on one side and a file that was added on the other work from the command line or at least have a command that will open up a window provide a confirmation screen before doing anything The Windows Briefcase does all of these except the command line. Is there any program that does all of these, or is there a way to synchronize the briefcase from the command line?

  Read the article

• Restore access to Cisco Connect after changing router settings

  - by StasM

  I have recently bought Cisco Valet Plus (M20) wireless router (which I recognize now was a mistake, but nevermind). It has two setup options - Cisco Connect software and web-based setup. Cisco Connect software allows changing very small set of settings, web-based setup allows access to almost all settings, except settings for guest network. The problem is that when I use web-based setup, Cisco Connect after some changes refuses to talk to the router, so I can't change guest settings anymore (since web interface doesn't allow to change them). It must be because of some config parameter not matching or some password set wrong - but I don't know where Cisco Connect stores them. So, does anybody have any idea how to make Cisco Connect talk to the router again once I changed the settings through the web interface?

  Read the article

• How do I enable a disabled Event Notification.

  - by Derick Mayberry

  I have a scenerio where I am using external notification to process documents being sent in from the entire navy fleet, normally I have no problems, but just a few days ago an administrator changed passwords and I my queue processing failed and I rolled back the transaction with this C# code: catch (Exception) { TransporterService.WriteEventToWindowsLog(AppName, "Rolling Back Transaction:", ERROR); broker.Tran.Rollback(); break; } after which my target queue would continue to fill up but nothing to the external activation queue. Does the Event Notification get disabled once a transaction is rolled back? Should I have done a broker.EndDialog here when catching my exception? Also, after my event notification is disabled(if that is actually whats happening) how do I re engage it? Do I have to drop it and recreate it? Thank in advance for any help, I love Service Broker and its workign wonderfully except for this bug that I hope to fix soon.

  Read the article

• Which iptables rule do you think is a 'must have'

  - by Saif Bechan

  I have some basic iptable rules set up now for my vps. Just block everything except some default ports, 80,21,22,443. I do get brute forced a lot. I have heard that iptables is very powerful but I have not seen many use cases. Can you give me an example of a(some) rule(s) you always use and give a small example why. I can not find a general best practice post here on SF, if there is any I would like the link. If this is a duplicate I am sorry and it can be closed.

  Read the article

• Mass renaming, *nix version

  - by Paolo B.

  I was looking for a way to rename a huge number of similarly-named files, much like this one (a Windows-related question) except that I'm using *nix (Ubuntu and FreeBSD, separately). Just to sum up, while using the shell (Bash, CSH, etc.) how do I mass-rename a number of files such that, for example, the following files: Beethoven - Fur Elise.mp3 Beethoven - Moonlight Sonata.mp3 Beethoven - Ode to Joy.mp3 Beethoven - Rage Over the Lost Penny.mp3 will be renamed like these? Fur Elise.mp3 Moonlight Sonata.mp3 Ode to Joy.mp3 Rage Over the Lost Penny.mp3 The reason I want to do this is that these collection of files will go under a directory named "Beethoven" (i.e. the filenames' prefix), and having this information on the filename itself will be redundant.

  Read the article

• Config postGreSQL pg_hba.conf restric role access

  - by Mathias

  Hello postgre experts. I am completely new to the game but need the following: I Create a new role with login. Let's say: User1 I then create a Database 'User1Database' and set User1 as the owner. User1 has no rights to do anything except for access. Now when I connect using User1 it somehow has access to all databases. I then learned I neeed to write something in here. User1 should have global access to User1Database and absolutely no access to anything else. What lines do I need to add to my pg_hba file? Currently it looks like this: # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 host all all 0.0.0.0/0 md5 Hope someone can write me the exact lines and explain them to me.

  Read the article

• Fluxbox startup file not working

  - by Jack

  I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox. It doesn't matter what app I try, so it isn't an app problem. here is my startup file: #!/bin/sh # # fluxbox startup-script: # # Lines starting with a '#' are ignored. # Change your keymap: xmodmap "/home/josh/.Xmodmap" # Applications you want to run with fluxbox. # MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END. tint2 & tilda & # And last but not least we start fluxbox. # Because it is the last app you have to run it with ''exec'' before it. exec fluxbox # or if you want to keep a log: # exec fluxbox -log "/home/josh/.fluxbox/log" I have also tried tests such as "touch ~/testwoked" and such, nothing works. It makes no difference if the file is executable or not.

  Read the article

• What is the safest and least expensive way to store 10 terabytes of data?

  - by Josh T

  I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

  Read the article

• MySQL mistake with grant option

  - by John Tate

  I am unsure reading the MySQL documentation if creating a user with the GRANT option will give them the power to create users and grant privileges, or change the privileges of other users databases. I have been creating databases for users like this CREATE DATABASE user; USE user; GRANT ALL PRIVILEGES ON *.* TO 'user'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION; Is this the best way of doing it or have I just given my users too much control? They are people I am hosting sites for. Thankfully at this point they are trustworthy. I use quotas. Edit: I have realized I have been granting users access to all databases. This is obviously stupid I should be using this: GRANT ALL PRIVILEGES ON database.* to 'user'@localhost' IDENTIFIED BY 'password' What is the simplest way to revoke privileges for every user except root so I can quickly end this catastrophic rookie mistake?

  Read the article

• Backup Source (non source control)?

  - by acidzombie24

  I back up my code with svn. I have project files in there however i ignore selected things. I also ignore jpg, ogg, etc. Right now i would like to backup everything. However the zip result is 1gb (i have a lot of code). I know i can cut down the filesize by 60%+ Is there an app i can use which will backup everything except the bin and obj folders? perhaps keep ogg, json, jpg files but ignore .svn or .pdb files?

  Read the article

• SQL Server Transaction Log RAID

  - by Eric Maibach

  We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

  Read the article

• How to close the logon process named NtLmSsp ?

  - by Aristos

  I have a windows 2003 server and time to time I am getting many login failures like this one. Logon Failure: Reason: Unknown user name or bad password User Name: administrator Domain: xx.xx.xx.xx Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: XLHOST Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 173.45.70.100 <- hacker Source Port: 4722 AND Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: user Source Workstation: XLHOST Error Code: 0xC0000064 The question is, how can I close this process of login ?, what I have left open and some one can try to login ? Some notes: I login to the server using tunneling, nothing is open except dns, email, and web ports, not even ftp, and all default ports are change and hidden. I also monitor port scan and capture any one that try to find the hidden ports. Probably it is something open... Thank you in advanced.

  Read the article

• Using Default Document with Forms Authentication

  - by John Rabotnik

  I have a site hosted on IIS7 with a default document specified as default.aspx. This works fine but my app uses Forms Authentication and I want to disable Anonymous Authentication completely. When I do disable anonymous authentication for everything except the login page, everything works fine but the default document setting stops working. With Anonymous authentication switched on if I visit http://mysite I get passed to http://mysite/default.aspx (which then redirects to the login page if the user hasn't already logged in) If I disable anonymous authentication (leaving only forms based auth enabled) and I visit http://mysite I get a permission denied page from IIS. Yet, if I visit http://mysite/default.aspx directly then the site works fine. I just want to disable anonymous authentication and have http://mysite go to http://mysite/default.aspx. Any ideas would be greatly appreciated.

  Read the article

• Disable IPv6 on Loopback address (Localhost, Computer name, ...)

  - by Greg Bray

  We tried installing a 3rd party software product on a new Windows 2008 R2 server and found that everything works except for accessing local services through loopback addresses such as localhost or the computer name (ex: VPS-Web which resolves to localhost). We are not using IPv6 and would like to disable it until the software is compatible. I tried using these instructions for disabling IPv6 on Windows 2008 R2 but it did not disable the protocol for localhost. Pinging localhost or VPS-Web will still return ::1: instead of 127.0.0.1. I can use ping localhost -4 to get the correct address, but IPv6 takes precedent over IPv4 so the 3rd party software only gets the IPv6 address.

  Read the article

• MySQL Daemon failed to start

  - by T. Brian Jones

  THE SETUP I'm running Linux CentOS on an Amazon EC2 instance. The MySQL data files are on an EBS Drive mounted at /data/ ( symlink - /var/lib/mysql /data/mysql ). Everything works fine in this setup. THE PROBLEM I'm trying to move everything from this EBS drive to a new drive. I umounted the /data/ drive, and mounted it at /data2/. Then I mounted the new drive at /data/ and copied everything over to it from /data2/. Everything on the system works great, except MySQL. Every time I try to start the MySQL daemon ( /etc/init.d/mysqld start ) I get a MySQL Daemon failed to start error.

  Read the article

• What would be better in my case - apache, nginx or lighttpd ?

  - by The Devil

  Hey everybody, I'm writing a php site that's expected to get about 200-300 concurrent users browsing it. When initializing the application will load about 30 php classes, some 10 maybe 15 images and a couple of css files. So my question is what else can I do (except optimizing my code and using apc/eaccelerator for php) to get as close as possible to those numbers of concurrent users ? Currently we haven't chosen a server for the site to be hosted on but most probably it'll be a VPS Dual core + 2 or maybe 4gb ram. Is it possible for such a server to handle that load ? Also how could I test it myself and be sure that it'll be able to handle it ? Thanks in advance, Me

  Read the article

• pdftk issue after updating Ubuntu from 9.04 to 9.10

  - by Crazydog

  We upgraded our server to 9.10 from 9.04 the other day, and it all went well except for one rather important program. We're using pdftk to automatically generate filled out pdf forms. On 9.04, it worked just fine. After updating to 9.10, the pdf forms would no longer be filled out - they'd just be empty. I discovered that if I try to create an fdf file via pdftk from my PDF form, it just creates an empty fdf with no fields. On windows, pdftk generates the fdf file just fine. Any ideas? Thanks.

  Read the article

• After virus, IE and Chrome don't work but Firefox does.

  - by Erich

  I recently got rid of a virus on my laptop. Afterwards everything seems to be working fine except for some internet connectivity problems. Internet Explorer and Chrome won't display an webpages, Firefox does but I can't update it to the most recent version. I've also noticed that some of the gadgets on Google Gadgets don't work properly. My internet connection is working fine, especially since I can get to websites via Firefox. I have tried to re-install IE and Chrome, but there was no change. What has caused this and how can I fix it?

  Read the article

• Solaris 10 opencsw git package issue with bitbucket git hosting

  - by zephyrus00jp

  Has anyone tried using `git' from opencsw package in order to work with bitbucket source hosting service (under solaris10)? I tried to use git as the bitbucket documentation explains, and - under Debian GNU/Linux, it worked flawlessly as described, but - under Solaris 10, I got Authentication Failed message. I even tried to run truss to see anything is suspicious but could not find any smoking gun under solaris why it failed. ldd git-binary didnd't show anything suspicious either (except for the libcrypt library which could be a suspicious to think about export restrictions. Have they shipped incompatible version? BUT since the password is typed into https: connection, I suspect it is only a matter of web-level cryptography and should be universal these days.) I am now tempted to compile git suite under solaris 10, but I did find people who seem to be using git with bitbucket under solaris 10 and am wondering what could be wrong.

  Read the article

• Why is ntpd not updating the time on my server?

  - by John

  I have ntpd running on my server. It's all the default settings, except I commented out its ability to be a server to other machines: # restrict -4 default kod notrap nomodify nopeer noquery # restrict -6 default kod notrap nomodify nopeer noquery restrict default ignore If I run ntpdate -q ntp.ubuntu.com, I'm told that my machine's clock is off by 7 seconds. What's going on? How can I diagnose what's happening, is there a log I can turn on? more info #1 # ntpq -np remote refid st t when poll reach delay offset jitter ============================================================================== 91.189.94.4 193.79.237.14 2 u 30 64 7 108.518 -0.136 0.361 more info #2 Here's what this looked like when I asked the question: # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 7.191308, delay 0.13310 10 Jan 20:38:09 ntpdate[31055]: step time server 91.189.94.4 offset 7.191308 sec And here's what it looks like now, after restarting ntpd a couple times (I'm assuming that's what fixed it): # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 0.000112, delay 0.13164 10 Jan 20:47:03 ntpdate[31419]: adjust time server 91.189.94.4 offset 0.000112 sec

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >