Search Results

Search found 2996 results on 120 pages for 'nathan friend'.

Page 96/120 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • Opening port 80 in router has no results

    - by Ricardo Pieper
    A friend of mine has a ADSL modem and I need to forward some ports. I have already forwarded the 1521 port (Oracle) and it's working fine. Now I need to forward the port 80. I already set up his IIS bindings to this port, and also forwarded the port like this video shows: https://www.youtube.com/watch?v=DLKD-fyexoo So I think I did everything correctly. The local IP address is also the same as the machine where the IIS server is running. I'm sorry, but I can't post images since i don't have 10 points :( Somehow I can't forward this port, yougetsignal.com keeps saying that the door is closed. When I try to open the port, the Control Panel says me that I have to access the control panel in the 8080 port, because the 80 port will be open. Ok, that's fine. But I'm still able to access it in the 80 port, and when I try to access it in the 8080 port, it doesn't work. I'm trying it with the TPLINK 8816, but I also tried to open it in the Opticom DsLink 279, and it didn't worked (using another machine), I got the exact same results. He has a dynamic IP address, but he is also using No-ip, so I can always access his Oracle database in a certain static address. The 1521 port is open. I also tried to disable the firewall in Windows, but that makes no sense to me, since the router doesn't really open the port 80. Clearly I'm missing something. I have never done it in my life, so I dont know how to proceed. Restarting the router was the first I did, no results. I'm accessing his laptop through TeamViewer, so I'm testing the port outside his local network. Edit: My ISP says that they allow to open ports, and the 1521 port is opened. What could I do to open the 80 port?

    Read the article

  • The Java Specialist: An Interview with Java Champion Heinz Kabutz

    - by Janice J. Heiss
    Dr. Heinz Kabutz is well known for his Java Specialists’ Newsletter, initiated in November 2000, where he displays his acute grasp of the intricacies of the Java platform for an estimated 70,000 readers; for his work as a consultant; and for his workshops and trainings at his home on the Island of Crete where he has lived since 2006 -- where he is known to curl up on the beach with his laptop to hack away, in between dips in the Mediterranean. Kabutz was born of German parents and raised in Cape Town, South Africa, where he developed a love of programming in junior high school through his explorations on a ZX Spectrum computer. He received a B.S. from the University of Cape Town, and at 25, a Ph.D., both in computer science. He will be leading a two-hour hands-on lab session, HOL6500 – “Finding and Solving Java Deadlocks,” at this year’s JavaOne that will explore what causes deadlocks and how to solve them. Q: Tell us about your JavaOne plans.A: I am arriving on Sunday evening and have just one hands-on-lab to do on Monday morning. This is the first time that a non-Oracle team is doing a HOL at JavaOne under Oracle's stewardship and we are all a bit nervous about how it will turn out. Oracle has been immensely helpful in getting us set up. I have a great team helping me: Kirk Pepperdine, Dario Laverde, Benjamin Evans and Martijn Verburg from jClarity, Nathan Reynolds from Oracle, Henri Tremblay of OCTO Technology and Jeff Genender of Savoir Technologies. Monday will be hard work, but after that, I will hopefully get to network with fellow Java experts, attend interesting sessions and just enjoy San Francisco. Oh, and my kids have already given me a shopping list of things to get, like a GoPro Hero 2 dive housing for shooting those nice videos of Crete. (That's me at the beginning diving down.) Q: What sessions are you attending that we should know about?A: Sometimes the most unusual sessions are the best. I avoid the "big names". They often are spread too thin with all their sessions, which makes it difficult for them to deliver what I would consider deep content. I also avoid entertainers who might be good at presenting but who do not say that much.In 2010, I attended a session by Vladimir Yaroslavskiy where he talked about sorting. Although he struggled to speak English, what he had to say was spectacular. There was hardly anybody in the room, having not heard of Vladimir before. To me that was the highlight of 2010. Funnily enough, he was supposed to speak with Joshua Bloch, but if you remember, Google cancelled. If Bloch has been there, the room would have been packed to capacity.Q: Give us an update on the Java Specialists’ Newsletter.A: The Java Specialists' Newsletter continues being read by an elite audience around the world. The apostrophe in the name is significant.  It is a newsletter for Java specialists. When I started it twelve years ago, I was trying to find non-obvious things in Java to write about. Things that would be interesting to an advanced audience.As an April Fool's joke, I told my readers in Issue 44 that subscribing would remain free, but that they would have to pay US$5 to US$7 depending on their geographical location. I received quite a few angry emails from that one. I would have not earned that much from unsubscriptions. Most readers stay for a very long time.After Oracle bought Sun, the Java community held its breath for about two years whilst Oracle was figuring out what to do with Java. For a while, we were quite concerned that there was not much progress shown by Oracle. My newsletter still continued, but it was quite difficult finding new things to write about. We have probably about 70,000 readers, which is quite a small number for a Java publication. However, our readers are the top in the Java industry. So I don't mind having "only" 70000 readers, as long as they are the top 0.7%.Java concurrency is a very important topic that programmers think they should know about, but often neglect to fully understand. I continued writing about that and made some interesting discoveries. For example, in Issue 165, I showed how we can get thread starvation with the ReadWriteLock. This was a bug in Java 5, which was corrected in Java 6, but perhaps a bit too much. Whereas we could get starvation of writers in Java 5, in Java 6 we could now get starvation of readers. All of these interesting findings make their way into my courseware to help companies avoid these pitfalls.Another interesting discovery was how polymorphism works in the Server HotSpot compiler in Issue 157 and Issue 158. HotSpot can inline methods from interfaces that have only one implementation class in the JVM. When a new subclass is instantiated and called for the first time, the JVM will undo the previous optimization and re-optimize differently.Here is a little memory puzzle for your readers: public class JavaMemoryPuzzle {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzle jmp = new JavaMemoryPuzzle();    jmp.f();  }}When you run this you will always get an OutOfMemoryError, even though the local variable data is no longer visible outside of the code block.So here comes the puzzle, that I'd like you to ponder a bit. If you very politely ask the VM to release memory, then you don't get an OutOfMemoryError: public class JavaMemoryPuzzlePolite {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    for(int i=0; i<10; i++) {      System.out.println("Please be so kind and release memory");    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzlePolite jmp = new JavaMemoryPuzzlePolite();    jmp.f();    System.out.println("No OutOfMemoryError");  }}Why does this work? When I published this in my newsletter, I received over 400 emails from excited readers around the world, most of whom sent me the wrong explanation. After the 300th wrong answer, my replies became unfortunately a bit curt. Have a look at Issue 174 for a detailed explanation, but before you do, put on your thinking caps and try to figure it out yourself. Q: What do you think Java developers should know that they currently do not know?A: They should definitely get to know more about concurrency. It is a tough subject that most programmers try to avoid. Unfortunately we do come in contact with it. And when we do, we need to know how to protect ourselves and how to solve tricky system errors.Knowing your IDE is also useful. Most IDEs have a ton of shortcuts, which can make you a lot more productive in moving code around. Another thing that is useful is being able to read GC logs. Kirk Pepperdine has a great talk at JavaOne that I can recommend if you want to learn more. It's this: CON5405 – “Are Your Garbage Collection Logs Speaking to You?” Q: What are you looking forward to in Java 8?A: I'm quite excited about lambdas, though I must confess that I have not studied them in detail yet. Maurice Naftalin's Lambda FAQ is quite a good start to document what you can do with them. I'm looking forward to finding all the interesting bugs that we will now get due to lambdas obscuring what is really going on underneath, just like we had with generics.I am quite impressed with what the team at Oracle did with OpenJDK's performance. A lot of the benchmarks now run faster.Hopefully Java 8 will come with JSR 310, the Date and Time API. It still boggles my mind that such an important API has been left out in the cold for so long.What I am not looking forward to is losing perm space. Even though some systems run out of perm space, at least the problem is contained and they usually manage to work around it. In most cases, this is due to a memory leak in that region of memory. Once they bundle perm space with the old generation, I predict that memory leaks in perm space will be harder to find. More contracts for us, but also more pain for our customers. Originally published on blogs.oracle.com/javaone.

    Read the article

  • The Java Specialist: An Interview with Java Champion Heinz Kabutz

    - by Janice J. Heiss
    Dr. Heinz Kabutz is well known for his Java Specialists’ Newsletter, initiated in November 2000, where he displays his acute grasp of the intricacies of the Java platform for an estimated 70,000 readers; for his work as a consultant; and for his workshops and trainings at his home on the Island of Crete where he has lived since 2006 -- where he is known to curl up on the beach with his laptop to hack away, in between dips in the Mediterranean. Kabutz was born of German parents and raised in Cape Town, South Africa, where he developed a love of programming in junior high school through his explorations on a ZX Spectrum computer. He received a B.S. from the University of Cape Town, and at 25, a Ph.D., both in computer science. He will be leading a two-hour hands-on lab session, HOL6500 – “Finding and Solving Java Deadlocks,” at this year’s JavaOne that will explore what causes deadlocks and how to solve them. Q: Tell us about your JavaOne plans.A: I am arriving on Sunday evening and have just one hands-on-lab to do on Monday morning. This is the first time that a non-Oracle team is doing a HOL at JavaOne under Oracle's stewardship and we are all a bit nervous about how it will turn out. Oracle has been immensely helpful in getting us set up. I have a great team helping me: Kirk Pepperdine, Dario Laverde, Benjamin Evans and Martijn Verburg from jClarity, Nathan Reynolds from Oracle, Henri Tremblay of OCTO Technology and Jeff Genender of Savoir Technologies. Monday will be hard work, but after that, I will hopefully get to network with fellow Java experts, attend interesting sessions and just enjoy San Francisco. Oh, and my kids have already given me a shopping list of things to get, like a GoPro Hero 2 dive housing for shooting those nice videos of Crete. (That's me at the beginning diving down.) Q: What sessions are you attending that we should know about?A: Sometimes the most unusual sessions are the best. I avoid the "big names". They often are spread too thin with all their sessions, which makes it difficult for them to deliver what I would consider deep content. I also avoid entertainers who might be good at presenting but who do not say that much.In 2010, I attended a session by Vladimir Yaroslavskiy where he talked about sorting. Although he struggled to speak English, what he had to say was spectacular. There was hardly anybody in the room, having not heard of Vladimir before. To me that was the highlight of 2010. Funnily enough, he was supposed to speak with Joshua Bloch, but if you remember, Google cancelled. If Bloch has been there, the room would have been packed to capacity.Q: Give us an update on the Java Specialists’ Newsletter.A: The Java Specialists' Newsletter continues being read by an elite audience around the world. The apostrophe in the name is significant.  It is a newsletter for Java specialists. When I started it twelve years ago, I was trying to find non-obvious things in Java to write about. Things that would be interesting to an advanced audience.As an April Fool's joke, I told my readers in Issue 44 that subscribing would remain free, but that they would have to pay US$5 to US$7 depending on their geographical location. I received quite a few angry emails from that one. I would have not earned that much from unsubscriptions. Most readers stay for a very long time.After Oracle bought Sun, the Java community held its breath for about two years whilst Oracle was figuring out what to do with Java. For a while, we were quite concerned that there was not much progress shown by Oracle. My newsletter still continued, but it was quite difficult finding new things to write about. We have probably about 70,000 readers, which is quite a small number for a Java publication. However, our readers are the top in the Java industry. So I don't mind having "only" 70000 readers, as long as they are the top 0.7%.Java concurrency is a very important topic that programmers think they should know about, but often neglect to fully understand. I continued writing about that and made some interesting discoveries. For example, in Issue 165, I showed how we can get thread starvation with the ReadWriteLock. This was a bug in Java 5, which was corrected in Java 6, but perhaps a bit too much. Whereas we could get starvation of writers in Java 5, in Java 6 we could now get starvation of readers. All of these interesting findings make their way into my courseware to help companies avoid these pitfalls.Another interesting discovery was how polymorphism works in the Server HotSpot compiler in Issue 157 and Issue 158. HotSpot can inline methods from interfaces that have only one implementation class in the JVM. When a new subclass is instantiated and called for the first time, the JVM will undo the previous optimization and re-optimize differently.Here is a little memory puzzle for your readers: public class JavaMemoryPuzzle {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzle jmp = new JavaMemoryPuzzle();    jmp.f();  }}When you run this you will always get an OutOfMemoryError, even though the local variable data is no longer visible outside of the code block.So here comes the puzzle, that I'd like you to ponder a bit. If you very politely ask the VM to release memory, then you don't get an OutOfMemoryError: public class JavaMemoryPuzzlePolite {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    for(int i=0; i<10; i++) {      System.out.println("Please be so kind and release memory");    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzlePolite jmp = new JavaMemoryPuzzlePolite();    jmp.f();    System.out.println("No OutOfMemoryError");  }}Why does this work? When I published this in my newsletter, I received over 400 emails from excited readers around the world, most of whom sent me the wrong explanation. After the 300th wrong answer, my replies became unfortunately a bit curt. Have a look at Issue 174 for a detailed explanation, but before you do, put on your thinking caps and try to figure it out yourself. Q: What do you think Java developers should know that they currently do not know?A: They should definitely get to know more about concurrency. It is a tough subject that most programmers try to avoid. Unfortunately we do come in contact with it. And when we do, we need to know how to protect ourselves and how to solve tricky system errors.Knowing your IDE is also useful. Most IDEs have a ton of shortcuts, which can make you a lot more productive in moving code around. Another thing that is useful is being able to read GC logs. Kirk Pepperdine has a great talk at JavaOne that I can recommend if you want to learn more. It's this: CON5405 – “Are Your Garbage Collection Logs Speaking to You?” Q: What are you looking forward to in Java 8?A: I'm quite excited about lambdas, though I must confess that I have not studied them in detail yet. Maurice Naftalin's Lambda FAQ is quite a good start to document what you can do with them. I'm looking forward to finding all the interesting bugs that we will now get due to lambdas obscuring what is really going on underneath, just like we had with generics.I am quite impressed with what the team at Oracle did with OpenJDK's performance. A lot of the benchmarks now run faster.Hopefully Java 8 will come with JSR 310, the Date and Time API. It still boggles my mind that such an important API has been left out in the cold for so long.What I am not looking forward to is losing perm space. Even though some systems run out of perm space, at least the problem is contained and they usually manage to work around it. In most cases, this is due to a memory leak in that region of memory. Once they bundle perm space with the old generation, I predict that memory leaks in perm space will be harder to find. More contracts for us, but also more pain for our customers.

    Read the article

  • [URGENT HELP PLEASE]USB Flash Drive Problem!

    - by Daren
    Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

    Read the article

  • USB Flash Drive Problem!

    - by Daren
    Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

    Read the article

  • asterisk extensions.conf & sip.conf

    - by Josh
    I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

    Read the article

  • Computer locking up, looking for bootable hardware diagnostic tool.

    - by Carl Menke
    Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

    Read the article

  • Batch Script to Find Certain words and delete those lines in a file

    - by SuperUserMan
    EDITED THE QUESTION as regarding type of solutions I am on Windows & some suggested SED etc. So i am OK with these 3rd party standalone exe's using command line Say i have following lines in abc.txt file "@yuy007 what are you doing friend #disneyrocks" "STFU, i dont care what you think @happy55" "@social88 @gg99 ok mate see you at the subway :)" "btw arnold was great in that movie @tt11 @gg11 #disneyrocks" "we are going to disney. Do you want to? #disneyrocks" "We dont like disney.#disneyrocks we are not going" ".@socialguy what are you upto #disneyrocks " I need to employ 5 filters with above file to get def.txt Delete all lines which start with @ character, like 1st and 3rd Delete all lines which start with .@ characters, like 7th Delete all lines which don't have any word starting with # like 2nd and 3rd In leftover lines, Delete all words starting with @ character (keeping the lines intact) like words @happy55 in 2nd , @social99 & @gg99 in 3rd, etc. In this case we still need to preserve quotes " at start and end of line Delete all the blank lines left after above lines are removed EDIT if i have following line , it wrongly deletes the content after @word's "btw arnold was great in that movie @tt101 @gb1997 #whatthehell" is edited to "btw arnold was great in that movie" Thanks

    Read the article

  • MySQL encoding problem after site move

    - by Quan Zhou
    Guys, I need your help. Since last month my friend has lost his database on Dreamhost, he decided to move his wordpress based blog site (written in Chinese) to my server. He's using a wp-plugin called wp-db-backup to perform regular db backups. And the servers backgrounds are: Dreamhost: Linux 2.6.31.5-modsign-aufs2-grsec-2-opt mysql Ver 14.12 Distrib 5.0.16, for pc-linux-gnu (i386) using readline 5.0 apache2 unknown version My Server: Linux li159-46 2.6.32.12-x86_64-linode12 mysql Ver 14.14 Distrib 5.1.45, for debian-linux-gnu (x86_64) using readline 6.1 nginx 0.8.36 His site's encoding was UTF-8 in both wp-config and db. I imported his db backup file in UTF-8 by default, then I sync'd files using rsync from dreamhost, then I just changed the db address and nothing more. But when I take first look at the "new" site, it was full of unreadable characters, I met this problem before, I changed charset options in browser but none of them can make it displayed properly. Then I converted his db to GB18030, it works with only if browser set charset to GB18030 either GBK, but by default they recognize the charset as UTF-8. I tried to edit the headers but it doesn't work. What could I do now? Thx~~

    Read the article

  • Choosing a new laptop

    - by chiongms
    I'm looking for a new laptop. I saw few: i) HP ProBook 4321s ii) HP ProBook 6440b iii)Dell Latitude E6410 i found these laptops are still very new..is it? not much comments about them. can anyone help? i doubt how their graphic cards perform compare to each other? ProBook 4321s- Radeon HD4350 ProBook 6440b- Radeon HD4550 Latitude E6410- NVS 3100M most of the time i'll running 3D CAD software, C++ programing...i saw my friend's laptop with radeon HD4350. it's perfectly fulfilling my demand. but i wonder how the other two are? Another thing i doubt is the screen resolution..my current laptop is 1280x800, and i found it comfortable to use. But these two HP only offer 1366x768..will it make any large different? Lastly, is there anyway to estimate how their power consumption is from the spec sheet? well, i would prefer one with longer battery usage time. my current laptop is suck...only last 1 hour even when it's still new..i'm not going to get another like this anymore. Anyone can help me please? Thanks!

    Read the article

  • Asterisk terminating outbound call when picked up, sends 'BYE' message

    - by vo
    I'm running Asterisk 1.6.1.10 / FreePBX 2.5.2.2 and I've got an outbound trunk setup. Everything use to work fine until recently (perhaps due to upgrade to FC12 or other things I'm not sure). Anyway the setup does not appear to have issues registering and setting up the call, RTP packets go both ways and you can hear the ringing from the other side. However it appears that when the call is picked up or thereabouts, the incoming RTP packets cease. Upon closer inspection with Wireshark, there are these particular packets that seem to be the cause: trunk->asterisk SIP/SD Status: 200 OK, with session description asterisk->trunk SIP Request: ACK sip:<phone>@trunk:6889 asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 [..about a dozzen RTP packets in/outbound..] trunk->asterisk SIP Status: 200 OK, CSeq: 104 Bye [..outbound RTP continues, phone is silent..] Then the inbound RTP packets cease, however the asterisk logs dont show any activity at this point. The last entry reads 'SIP/ is answered SIP/'. Then when you hangup the extension, you get asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 trunk->asterisk SIP Status: 481 Call Leg/Transaction does not exist My trunk peer settings in FreePBX are: username=<user> fromuser=<user> canreinvite=no type=friend secret=<pass> qualify=no [qualify yes produces 401/forbidden messages] nat=yes insecure=very host=<sip trunk gateway> fromdomain=<sip trunk gateway> disallow=all context=from-pstn allow=ulaw dtmfmode=inband Under sip_general_custom.conf i have stunaddr=stun.xten.com externrefresh=120 localnet=192.168.1.1/255.255.255.0 nat=yes Whats causing Asterisk to prematurely end the call and still think the call is in progress? I have no idea where to look next.

    Read the article

  • Blinking power button

    - by Mike Ramsey
    A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

    Read the article

  • Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

    - by royatl
    My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

    Read the article

  • Windows 7 - User profile corrupted on standby/hibernate

    - by Dogbert
    I have a friend who uses Windows 7 for her home PC. She has a RAID1 array that is using up-to-date Intel Matrix storage drivers, and the entire array is backed up to a separate internal SATA HDD via Acronis True Image every night. Over the weekends, she lets her machine go into suspend after 4 hours of inactivity, and then later into hibernation after 6 hours of inactivity. Her Acronis backup system does nightly incremental backups, and full backups every Saturday night. She also has AVG Free Antivirus installed which does full scans every Monday. So far, on two occasions, on Sunday morning, her user profile is corrupt. I couldn't find any solution that allowed me to repair her profile, so I end up having to (as suggested by MS Knowledge Base, http://windows.microsoft.com/en-us/windows7/fix-a-corrupted-user-profile ;, Yep, no solution to fixing it, just clobber the whole thing) recreating her profile, then copying over data, recreating her Outlook profile, reconfiguring all third-party applications, etc. It's a real nightmare, and takes 4 hours to do each time. Are there any suggestions on how to resolve this profile corruption? This was happening even before the RAID/Acronis solution was in place, but I thought I'd provide as much information as possible.

    Read the article

  • AVCHD MTS h264 1080p file with choppy playback in Linux

    - by marc
    When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

    Read the article

  • transparent git-svn gateway

    - by azatoth
    Currently we have an subversion repository with the following layout: /trunc /group1 /proj1 /proj2 group2 /proj3 /etc.. /tags /group1 /proj1 /proj2 group2 /proj3 /etc.. /branch /anything temporary I believe this is an rather bad layout, but at the moment it's difficult to change it fully. Personally I dislike subversion, due mostly the long time it takes to check history, and also that branching and merging are cumbersome etc. so I really want to use git instead. Sadly we cant just switch to git as the mental capacity for some might be to overwhelming, so I was looking into git-svn to see if I could practically use that to solve the issue. Sadly that directly ends up in a bad situation as I want to break down each project into one git repo, and I don't want to have to recreate the git-svn checkout on each computer I work on. so I though perhaps there is an possibility to create some sort of transparent git ?? svn proxy/gateway, so that an push to that repo "commits" to the svn repo, and an commit to the svn repo updates the git repo. Google hasn't been my friend, have only found generic usage help to use git-svn, so I ask you if you have some good ideas to accomplish this.

    Read the article

  • pppd disconnects from 3G, doesn't reconnect, w/ persist set

    - by bytenik
    I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

    Read the article

  • Diagnosing PCI issues

    - by dtsazza
    I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

    Read the article

  • Multiple static WAN IP addresses to single LAN subnet

    - by Jessy Houle
    Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

    Read the article

  • sata hard drive failed

    - by M. Shehryar
    Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

    Read the article

  • sata hard drive failed

    - by M. Shehryar
    Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

    Read the article

  • asterisk extensions.conf & sip.conf

    - by Josh
    I'm trying to get my Dialplan to work. When I call, the only thing I get is a dial tone to enter extension "no Background(thanks-calling) is played". When extension 123 is dialed, busy signal is triggered and asterisk CLI get frozen. Any help will be appreciate it. Conf files below. ; PSTN on sip.conf [pstn] type=friend host=dynamic context=pstn username=pstn secret=password nat=yes canreinvite=no dtmfmode=rfc2833 qualify=yes insecure=port,invite disallow=all allow=ulaw ; PSTN on extensions.conf [pstn] exten => s,1,Answer exten => s,2,Wait,2 exten => s,4,DigitTimeout,5 exten => s,5,ResponseTimeout,10 exten => s,6,Background(thanks-calling) exten => 0,1,Goto(incoming,123,1) ; (Member Services) [incoming] exten => 123,1,NoOP(${CALLERID}) ; show the caller ID info in the console exten => 123,n,Ringing() exten => 123,n,Answer() exten => 123,n,Playback(silence/1) exten => 123,n,Playback(connecting1) exten => 123,n,Wait(3) exten => 123,n,Dial(SIP/line1,60) exten => 123,n,Congestion

    Read the article

  • Why can't I renew my dynamic IP address?

    - by qwerty
    So, I'm going to explain this from the start. I've started a project with a friend of mine which includes a webspider, that crawls through all pages on a site and stores them in a DB. Since I've never done this before, I didn't think about the amount of requests I was actually sending to the site, and after a day or two I finally got my IP blocked. I need to be able to visit that site as it's very important to me. Not only for my project, but for other reasons too. (and if I'm able to renew my IP I'm going to set a delay on the crawler so I don't get blocked & DDOS the site) I have a dynamic IP address, at least that's what my router settings say. I've tried ipconfig /flushdns, ipconfig /release, restart computer. No result. I end up with the same IP address. I've also tried renewing it from the router, however, I think it uses the same method which isn't working. Is it possible that site has blocked my mac address? Can a site even access my mac address?

    Read the article

  • Missing BootMgr in Vista

    - by Selase
    Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >