Search Results

Search found 4841 results on 194 pages for 'poor programmer'.

Page 96/194 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • Data Recovery needed with a Sector Zero problem on a HDD

    - by Jay Robins
    Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

    Read the article

  • Why does a browser dialog come up when an xmlhttprequest sends the wrong / no auth?

    - by Kyle
    How come the major browsers all bring up a login dialog when an xmlhttprequest does auth wrong or doesn't send it? I mean isn't this poor UI? Now a days it seems like a lot of people try http auth in jQuery, because theoretically it is quite easy - until the user fails to enter the correct data and is presented with the browsers dialog, which gets in their way, and they might have no idea what to do with it or why it's there? I don't know too much about these low level browser specifications but can someone bring this up with the RFC or webkit/gecko developers? jQuery digest auth could be powerful and user friendly if this was fixed. ** It seems like apache could also fix the problem on their side by not sending the header, but whichever one is the most secure way of doing this would be nice.

    Read the article

  • Set up lnux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project The above upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Create a chroot jail to hold sftp user via rssh. This will force SCP/SFTP and will circumvent traditional FTP server setup. #cd /tmp #wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm #rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm #useradd -m -d /home/dev -s /usr/bin/rssh dev #passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. #vi /etc/rssh.conf Uncomment line allowscp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). Above instructions for SFTP appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

    - by vocoder
    I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

    Read the article

  • need for tcp fine-tuning on heavily used proxy server

    - by Vijay Gharge
    Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

    Read the article

  • How to open embedded Visio files with only Visio Viewer?

    - by Christopher Galpin
    For some bizarre reason Visio Viewer seems incapable of opening vsd files when they're embedded within a (2010) Excel document: However if I open the Excel document with 7-zip, browse to xl\embeddings, extract oleObject1.bin and rename it to a .vsd file extension it opens perfectly fine with Visio Viewer in Internet Explorer. Since this opens fine on a computer with the full Visio installed, my guess is it's trying to launch Visio rather than IE. Is there something I can do to fix this? I've been scanning with Process Monitor and searching with RegScanner comparing a Visio-installed system to a VisioViewer-installed system and there doesn't actually seem to be any sort of registry value giving direction here... maybe it's just the nature of OLE. (If it can't be fixed I'm okay with converting the extracted one to a .png or so to replace the embedded object, but the "solutions" I've found for vsd to image conversion are very poor or non-working, i.e. buggy code, code with Visio dependencies, or online services.)

    Read the article

  • How to move unseen windows => Cannot access my application after switching monitors

    - by Stephane Rolland
    I switch monitors really often: At work I have a very poor computer, and gpu too, which is bad at keeping its configuration, resolution and monitor position between each reboot. Both monitor are different size and resolution. When doing that I often have applications that were on one of the monitors that remember their last position opened... so now they are unseen, at screen coordinates I cannot access. I know there is a shortcut that can access the move functionnality of a window. Could you remind it to me. Do you have other trick to center all opened windows into the visible screens ?

    Read the article

  • How to re-do the hard disks in a WD Word Book Edition II ?

    - by jfmessier
    I recently purchased a WD World Book II, a 2 TB one. I call it the "White Box". It has those 2 1TB drives, and they were in this RAID 1 config, only giving me about 1 TB. I could not delete the raid array, and I took the drives in a Linux box. But I also deleted the entire partitions of the disks, and I cannot even et the existing RAID array on this WD White Box. The drives are fine, but I cannot get them to work on the WD White Box. My goal was to get back to a real 2 TB storage space. If I cannot get those drives back in the White Box, I can re-use them elsewhere, but this would mean a waste of the firmware and network connection. After the fact, I read that, anyway, the network performance is rather poor. Thanks :-)

    Read the article

  • Meta key in Terminal.app vs national characters

    - by yacoob
    I'm using Terminal.app, and I'd like to use emacs running inside - either locally, or after sshing to remote server. Problem is, I can't get working Meta modifier. Namely, if I enable 'Use option as meta key', Option key works like proper Meta, but I lose ability to enter Polish diacritics (aelósznzc), that are entered with right Option. If I disable 'Use option as meta key', my Meta is gone, but I can again use Polish characters. In this state they appear only with right Option modifier, so I guess it's Terminal.app's fault that it doesn't make a difference between left and right Option key, when the relevant preference is selected. What are my options then? Is there a good solution for my problem? I can always use ESC as a poor man's Meta replacement, but I don't like that idea.

    Read the article

  • Why does restarting the modem fix latency?

    - by Giovanni Galbo
    In the last few days I've noticed poor internet performance. Today I ran a speed test and the results were abysmal... 10mb down and 0.18mb up (which really hurt, because I was trying to RDC from another location). I pay for 30mb down and 5mb up. Latency was at 128ms. Before calling my ISP to give them a verbal lashing, I unplugged the modem and plugged it back in. I pretty much got top speed after doing that (with a latency of 7ms). I'm the type of guy that likes to know what goes on under the hood. So what's the deal? What mysterious powers does restarting give to my modem?

    Read the article

  • How can I keep a file in Windows 7's cache?

    - by netvope
    Sometimes you know better than Windows what files will be re-used later. Suppose you have 8GB of memory, and you use the same 1GB file every hour in an I/O-bound application (which takes 1 second to finish if the file is cached, and 1 minute if not.) Now you process some other 16GB of data that are not going to be re-used. Naturally the frequently used 1GB file will be pushed out of the cache. It would be beneficial if one can tell Windows to keep that 1GB file in memory. (Better yet, it would be great if I can tell Windows not to cache those 16GB of data, but I'm not optimistic that this can be done.) The poor-man's way to keep a file in the cache would be to keep reading the file. Are there any better ways? Are you aware of any programs that do this? (If this can be easily done under Linux, please let me know too.)

    Read the article

  • Touchpad stops working when plugging in new laptop PSU

    - by drahcir
    I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

    Read the article

  • apache2.2 response problem

    - by ffffff
    We have some heavy file (about 100k). sometime response time is very slow (100s).. why ? I'm a poor server administrator. so could you help me? information is following: httpd one process has 10MB RAM is 4G <IfModule mpm_prefork_module> StartServers 300 MinSpareServers 10 MaxSpareServers 300 ServerLimit 1000 MaxClients 1000 MaxRequestsPerChild 9999 </IfModule> What is the best configurations? MaxClients are too many?

    Read the article

  • Puppet performance compared to cfengine

    - by Andy
    I'm considering using Puppet or cfengine. Key factors are performance, and research on the internet suggests cfengine uses less memory and CPU cycles compared to puppet. However, puppet seems easier to use. I need to manage several web servers, as well as handheld tablets and machines that will only connect to some central control servers periodically. All are Linux machines. Would I be able to use either puppet or cfengine for this? And if so, does puppet still make poor use of resources? I'd like to use puppet because it seems simpler, but a lot of the articles I've found refer to cfengine 2 - is cfengine 3 easier to configure? Thanks

    Read the article

  • SQL Server 2000 need to prevent logons whilst performing a backup for a side by side migration

    - by pigeon
    I'm looking for a way to prevent logons from occurring in order to take a full backup of a Database to migrate from its current SQL Server 2000 instance to a new SQL 2005 instance. A friend of mine suggested running a script which would put the DB into a rollback state. Not being a DBA my DDL is very poor and running a script that I don't understand may not be the best idea. One option which might be easier is to simply detach and copy, to the new server. Any suggestions would be greatly appreciated.

    Read the article

  • SAN shows as unallocated in Windows Server

    - by Gareth Ferneyhough
    Hello. We have a SAN drive that shows as unallocated in Windows Server 2008. I believe it is a raid 10 with 4+ disks. The disks are in good health. I think a server that we rebuilt tried to connect to the drive and re-initialized them, or re-wrote the partition table. (excuse my poor terminology). We ran TestDisk on the drive and it shows no partitions, so now we are doing a quick search (which is not so quick). Can anyone else suggest anything? Thanks, Gareth

    Read the article

  • taskbar-free window manager

    - by 7vies
    I'm looking for a window manager that is not based on the "standard" taskbar (which I find a poor idea and I'm completely tired of). I'm aware of tiling window managers and improvements in last versions of operating systems, but I can't find what I need. I suppose that any window takes the whole screen (or can be tiled), and I imagine switching between windows like that: on a hotkey or mouse hot zone the screen becomes a task switcher where tasks are organized in a somewhat convenient manner. Well, it's a bit like a taskbar with autohide, but I think there could be some more convenient ideas than simply stacking icons and descriptions... It is also supposed to be lightweight enough, for example to run on a netbook. Any suggestions?

    Read the article

  • How to configure my hosting provider for email when DNS redirection already in place?

    - by Johann
    First of all I apologize for my poor understanding of network and I hope I used the correct terminology for everything: I have bought a domain name with 1&1 to create an online shop, using kingeshop. I followed the steps explains here to point the domain name to kingeshop IP address and everything is working fine. Now I would also like to use my domain name to create an email account. But 1&1 seems to say they're not responsible for this now the DNS is transfered to kingeshop's. What I'm wondering is who is really "in charge" of my domain name now? 1&1 also lets me configure the MX-record but I don't have a clue what I can do with this. Could I just use an existing gmail address somehow? Thanks a lot for any help or clarity you can bring me on that matter!

    Read the article

  • Can USB Hubs affect peripheral performance?

    - by Daniel Rasmussen
    Like many laptops, mine has 2 USB 2.0 ports. I'm looking to purchase a USB hub for my peripheral devices. I'm also planning on purchasing a laptop cooler with two USB powered fans, which connects to a USB port but can extend the plug, so it doesn't use one up. (Sorry for the poor description; see the link for a picture.) My questions are these: Can one plug 'too many' peripherals into a USB port? Can I plug my fans into a port, then the hub into the fans, then my keyboard and mouse, mic, and webcam into the extender..? Is it possible to draw too much power from a port? Secondly, will a USB hub affect the performance of any of my devices? I'm mostly worried about my mouse and keyboard. I like wired mice because I've noticed some lag in my Bluetooth mouse.

    Read the article

  • ASP.NET, PostgreSQL, Mono, Ubuntu, Apache: Good idea?

    - by wreck_of_u
    I am a long-time Microsoft .NET developer. ASP.NET/MSSQL/IIS has been my bread & butter over the past 6 years. Now, I'm getting fond of the "lightweightness" of Ubuntu 10.xx server. I'm also loving SSH-ing it from my Windows 7 PC and installing apps using the awesome "apt-get" command. I've also been using HeidiSQL with MySQL now and loving it. It feels like Management Studio. However, i've read that PostgreSQL "may" be better than MySQL, and I did experience some MySQL overloads in my Moodle box (but this can be just a poor tweaking in my part). My question is, would it be a good idea to run this configuration? ASP.NET 4.0 PostgreSQL (the latest one I can apt-get!) Ubuntu 10.10 with Mono running on Apache Also, I assume I would be using Npgsql for Mono as my connector from ASP.NET to PostgreSQL?

    Read the article

  • Why my new GTX 660m's clock drops drastically after running few seconds

    - by trVoldemort
    I bought a Lenovo Y580 laptop few days ago, this model is equipped with GTX 660m graphics card. However, the game performance is unbelievably poor since it out from the box. I realized there is something wrong with this graphics card. I downloaded GPU-z, and did a simple test. And I was shocked by the fact that my GTX 660m graphics card is running at 135.0mhz core clock. (It should be 835mhz at least!) Even the integrated graphics card "Intel HD graphics 4000" can run at 650mhz. Further examining showed that in the first few seconds GTX 660m was actually running at 835mhz, however the core temperature quickly reached 90+°C and the clock (maybe) automatically drop to 135.0mhz. This is very strange. Anyone has any idea what's going on here?

    Read the article

  • Apache+FastCGI Timeout Problem

    - by Sadjad Fouladi
    Hi all. I've recently installed mod_fastcgi and Apache 2.2. I've a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke "mysite.com/test.fcgi" I see "Internal Server Error" message after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] I'm very confused, please help me! [Sorry for my poor English!]

    Read the article

  • Is there software that lets me drag windows between two PCs? (there is!)

    - by Jonathan
    I'm looking for a preferably free program that is similar to MaxiVista, which lets you extend you desktop to another desktops screen on the same network. But with MaxiVista you have to extend the entire screen. I'd like to just drag one window onto the other computers screen without extending the desktop. So on top of the other computer's windows. Kind of like a cross between MaxiVista and Windows 7' XP mode where you can run XP programs on the windows 7 desktop. EDIT: I am pleased to announce this is possible, though the windows is poor quality (8-bit color) but I believe thats just because MetaVNC isn't very up to date.

    Read the article

  • How to erase a SSD to restore factory performance in Linux?

    - by Andy B
    Due to big performance issues with an mdraid-1 array I'd like to pull down from the array one of the devices (Samsung 840 Pro), erase it to restore factory performance and re-add it to the array. The reason I want to do this to one of the SSDs is because the poor performance seems to be related to one specific SSD out of the two (although they are the same brand, model and firmware ver). But how do I erase a SSD from Linux? I mention that hdparm indicates that both drives are frozen at this time. Maybe because they are part of an md array? Thanks in advance!

    Read the article

  • What cable to connect Inspiron 1720 to HDMI TV?

    - by Bernhard Hofmann
    Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >