Search Results

Search found 89616 results on 3585 pages for 'working set'.

Page 96/3585 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • Yum update not working on CentOS 6.2 minimal install

    - by Owen
    Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

    Read the article

  • Cloudmin KVM DNS hostnames not working

    - by dannymcc
    I have got a new server which has Cloudmin installed. It's working well and I can create and manage VM's as expected. The server came with a /29 subnet and I requested an additional /29 subnet to allow for more virtual machines. I didn't want to replace the existing /29 subnet with a /28 because that would have caused disruption with my existing VM's. To make life easier I decided to configure a domain name for the Cloudmin host server to allow for automatic hostname setup whenever I create a new virtual machine. I have a domain name (example.com) and I have created an NS record as follows: NS kvm.example.com 123.123.123.123 A kvm.example.com 123.123.123.123 In the above example the IP address is that of the host server, I also have two /29 subnets routed to the server. Now, I've added the two subnets to the Cloudmin administration panel as follows: I've tried to hide as little information as possible without giving all of the server details away! If I ping kvm.example.com I get a response from 123.123.123.123, if I ping the newly created virtual machine (example.kvm.example.com) it fails, and if I ping the IP address that's been assigned to the new virtual machine (from the second subnet) it fails. Am I missing anything vital? Does this look (from what little information I can show) like it's setup correctly? Any help/pointers would be appreciated. For reference the Cloudmin documentation I am using as a guide is http://www.virtualmin.com/documentation/cloudmin/gettingstarted

    Read the article

  • https not working... binding set, certificate installed

    - by rksprst
    I've installed the certificate and set the https bindings. However, when I load the site on https it does not load. I've looked at all the settings but everything seems correct. I've restarted the site numerous times. The certificate is stored on the local computer under personal-certificates... I have the private key for the certificate. The port (443) is open. If I try https://localhost on the server, the site loads... but with a domain error (i.e. it's localhost and not thedomain.com). But https://thedomain.com doesn't load. I really don't know why the https url isn't loading... anyone have any ideas? Thanks!

    Read the article

  • System Rescue CD on multiboot usb not working

    - by darkfeline
    I have a multiboot usb with System Rescue CD and GRUB2 on it. When I try to boot it, it tries to find systemrescuecd/sysrcd.dat, attempts to mount /dev/sr0 and all the partitions on /dev/sda before declaring cannot find systemrescuecd/sysrcd.dat on devices and dumping me onto a primitive shell. The relevant entries in grub.cfg: menuentry "SystemRescueCd 32bit" { linux /systemrescuecd/isolinux/rescuecd rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } menuentry "SystemRescueCd 64bit" { linux /systemrescuecd/isolinux/rescue64 rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } I think the problem is that System Rescue CD cannot see /dev/sdb, which is my usb, but I don't know where to begin to fix it. If it helps, I set up my USB with a utility called MultiSystem, which is like MultiISO for Linux.

    Read the article

  • Can't get PXE boot working on WDS + Linux DHCP server

    - by askvictor
    Hi I'm trying to get WDS to PXE boot some laptops. The university is running a (linux) DHCP server for the entire network; we can't run our own. We can (and have) set options in that DHCP server to point to a tftp server and file (pxeboot.n12 on the WDS server we run). The client seems to get the pxeboot.n12 file (judging by the server logs), but then comes back with 'TFTP download failed Pres any key to reboot'. I've tried running a third-party tftp service on the WDS server, and found that the client pulls the first stage (pxeboot.n12) correctly, but then looks for the second stage (bootmgr.exe) in the root of the tftp folder - whereas WDS places it in \boot\x86\ (or \boot\x64). Similarly, it looks for a file called BCD, which doesn't exist (rather there are a few files scattered around with the extension .bcd). I'm confused if the WDS tftp server does some magic returning certain files, or if I haven't configured it correctly. The server is 2008 R2. Cheers, Victor

    Read the article

  • Windows XP update not working

    - by Josh
    I have a problem with XP updating. It hangs when I try to search for updates on the website. But the automatic updates still work. And it's running IE6, so I'm trying to update to IE8, hoping that will fix the problems with the website. But when installing IE8 it just hangs at Installing Internet Explorer 8 for Windows XP And if I try to install it manually, it hangs when installing the updates for IE8. So looking at these logs, is there anything going wrong with the update process? Here is the end of ie8_main.log: 00:00.547: Started: 2012/09/15 (Y/M/D) 08:14:31.046 (local) 00:00.719: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds) 00:00.781: Command line: c:\cac6f883a91a15abdac3e9\update\iesetup.exe /wu-silent 00:00.828: INFO: Checking version for c:\cac6f883a91a15abdac3e9\update\iesetup.exe: 8.0.6001.18702 00:01.047: INFO: Acquired Package Installer Mutex 00:01.078: INFO: Operating System: Windows Workstation: 5.1.2600 (Service Pack 3) 00:01.328: ERROR: Couldn't read value: 'LIPPackage' from [Version] section in update.inf 00:01.359: INFO: Checking Prerequisites 00:01.391: INFO: Prerequisites Satisfied: Yes 00:01.484: INFO: Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 6.0.2900.5512 00:01.516: INFO: C:\Program Files\Internet Explorer\iexplore.exe version: 6.0.2900.5512 00:01.562: INFO: Checking if iexplore.exe's current version is between 8.0.6001.0... 00:01.594: INFO: ...and 8.1.0.0... 00:01.625: INFO: Maximum version on which to run IEAK branding is: 8.1.0.0... 00:01.656: INFO: iexplore.exe version check success. Install can proceed. 00:01.703: INFO: Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 6.0.2900.5512 00:01.719: INFO: Checking version for C:\WINDOWS\system32\mshtml.dll: 6.0.2900.6266 00:01.750: INFO: Checking version for C:\WINDOWS\system32\wininet.dll: 6.0.2900.6254 00:01.906: INFO: EULA not shown in passive or quiet mode. 00:01.984: INFO: Skip directly to Options page. 00:02.078: INFO: |PreInstall >>> CPageProgress::DlgProc: Exiting Phase PH_NONE 00:02.109: INFO: |PreInstall >>> CPageProgress::_ChangeState: Original Phase: 0 00:02.141: INFO: |Initialize >>> CPageProgress::_UpdateDisplay: Actual Phase: 1 00:02.187: INFO: |Initialize >>> >[BEGIN]------------------------------ 00:02.219: INFO: |Initialize >>> CPageProgress::_UpdateDisplay: Actual Phase: 1 00:02.250: INFO: |Initialize >>> SKIP[FALSE]>>Looking for skip clauses 00:02.281: INFO: |Initialize >>> SKIP[FALSE]>>Result: RUNNING This Phase 00:02.312: INFO: |Initialize >>> Calculating bytes needed to install. 00:02.375: INFO: |Initialize >>> Diskspace Required: 151918308 00:02.422: INFO: |Initialize >>> Diskspace Available to user: 223816298496 00:02.453: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize: CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000 00:02.484: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize: PutClientApplicationID: HResult 0x00000000 00:02.516: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateSearcher: HResult 0x00000000 00:02.547: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateDownloader: HResult 0x00000000 00:02.594: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateInstaller: HResult 0x00000000 00:02.625: INFO: WindowsUpdate>>WindowsUpdateMgr::Initialize: State Change: SS_INITIALIZED. 00:02.656: INFO: |Initialize >>> CStateInitialize::OnInitialize: Windows Update Manager Initialization Result: 0x00000000 00:02.687: INFO: |Initialize >>> CInstallationState::_ExitState: Preparing to Leave State. 00:02.719: INFO: |Initialize >>> CInstallationState::_ExitState: Setting Progress 100. 00:02.766: INFO: |Initialize >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded. 00:02.797: INFO: |Initialize >>> CInstallationState::_ExitState: Posting Exit Phase Message. 00:02.828: INFO: |Initialize >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded. 00:02.859: INFO: |Initialize >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0 00:02.891: INFO: |Initialize >>> CPageProgress::_UpdateDisplay: Actual Phase: 1 00:02.953: INFO: |Initialize >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0 00:02.984: INFO: |Initialize >>> CPageProgress::_UpdateDisplay: Actual Phase: 1 00:03.016: INFO: |Initialize >>> <[END]-------------------------------- 00:03.047: INFO: |Initialize >>> CPageProgress::_ChangeState: Original Phase: 1 00:03.078: INFO: |Uninstall Prev. >>> >[BEGIN]------------------------------ 00:03.109: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay: Actual Phase: 2 00:03.156: INFO: |Uninstall Prev. >>> SKIP[FALSE]>>Looking for skip clauses 00:03.187: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful() 00:03.219: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [TRUE ] Condition: !g_pApp->GetState()->AreWeDoingUninstall() 00:03.250: INFO: |Uninstall Prev. >>> SKIP[TRUE ]>>Result: SKIPPING This Phase 00:03.281: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState: Preparing to Leave State. 00:03.312: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState: Setting Progress 100. 00:03.344: INFO: |Uninstall Prev. >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded. 00:03.375: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState: Posting Exit Phase Message. 00:03.391: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded. 00:03.437: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0 00:03.469: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay: Actual Phase: 2 00:03.500: INFO: |Uninstall Prev. >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0 00:03.531: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay: Actual Phase: 2 00:03.562: INFO: |Uninstall Prev. >>> <[END]-------------------------------- 00:03.594: INFO: |Uninstall Prev. >>> CPageProgress::_ChangeState: Original Phase: 2 00:03.625: INFO: |WU Download >>> >[BEGIN]------------------------------ 00:03.656: INFO: |WU Download >>> CPageProgress::_UpdateDisplay: Actual Phase: 3 00:03.703: INFO: |WU Download >>> SKIP[FALSE]>>Looking for skip clauses 00:03.734: INFO: |WU Download >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful() 00:03.766: INFO: |WU Download >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetOptShouldUpdate() 00:03.781: INFO: |WU Download >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING 00:03.812: INFO: |WU Download >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall() 00:03.859: INFO: |WU Download >>> SKIP[FALSE]>>Result: RUNNING This Phase 00:03.891: INFO: Setting Windows Update Registry Keys: LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 - ForcePostUpdateInstall=0x00 00:03.953: INFO: Setting Windows Update Registry Keys: LookingForUpdates=0x01 - ForcePostUpdateDownload=0x01 - ForcePostUpdateInstall=0x00 00:03.984: INFO: WindowsUpdate>>Search: Search criteria: 'IsInstalled=0 and Type='Software' and CategoryIDs contains '5312e4f1-6372-442d-aeb2-15f2132c9bd7'' 00:04.031: INFO: |WU Download >>> Looking for Internet Explorer updates... And here is the end of the WindowsUpdate.log: 2012-09-15 08:14:16:109 1168 fc AU ############# 2012-09-15 08:14:16:109 1168 fc AU ## START ## AU: Search for updates 2012-09-15 08:14:16:109 1168 fc AU ######### 2012-09-15 08:14:16:109 1168 fc AU <<## SUBMITTED ## AU: Search for updates [CallId = {92AA8321-2BDA-46EA-828E-52D43F3BD58C}] 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {B4B9471C-1A5E-4D9C-94EF-84B00592946A}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {7F28CDA0-8249-47CA-BD3C-677813249FE9}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {F1B1A591-BB75-4B1C-9FBD-03EEDB00CC9D}.103 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {6384F8AC-4973-4ED9-BC7F-4644507FB001}.102 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {1C81AA3A-6F53-499D-B519-2A81CFBAA1DB}.102 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {7A25C7EC-3798-4413-A493-57A259D18959}.103 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {D6E99F31-FBF4-4DBF-B408-7D75B282D85B}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {1D45A361-56E7-4A3E-8E9F-AE022D050D13}.101 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {AA38D853-2A3E-4F72-86E9-32663D73DC55}.102 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {3ABE760C-4578-4C84-A1CB-BF1DF019EFE4}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {596ADB47-108D-482D-85BA-A513621434B7}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {0F90F2F5-18A2-412C-AEB9-7F027D6C986D}.104 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {7079BEEB-6120-4AFD-AD07-FB4DFA284FBE}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent Update {A566B4B1-D44F-46F8-A862-64EFA6684948}.100 is pruned out due to potential supersedence 2012-09-15 08:14:16:140 1168 2c4 Agent Update {A2E271BC-57AE-44C3-8BFF-919D81299B5D}.100 is pruned out due to potential supersedence 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {DE76AB56-5835-46D4-A6B7-1ABED2572F00}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {C683FDC6-3997-4D12-AABB-49AE57031FE6}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Added update {4C5429B5-22FE-4656-9E82-D80C1B99D73E}.100 to search result 2012-09-15 08:14:16:140 1168 2c4 Agent * Found 16 updates and 69 categories in search; evaluated appl. rules of 1868 out of 3469 deployed entities 2012-09-15 08:14:16:171 1168 2c4 Agent ********* 2012-09-15 08:14:16:171 1168 2c4 Agent ** END ** Agent: Finding updates [CallerId = MicrosoftUpdate] 2012-09-15 08:14:16:171 1168 2c4 Agent ************* 2012-09-15 08:14:16:187 1168 2c4 Agent ************* 2012-09-15 08:14:16:187 1168 2c4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-09-15 08:14:16:187 1168 2c4 Agent ********* 2012-09-15 08:14:16:187 1168 2c4 Agent * Online = No; Ignore download priority = No 2012-09-15 08:14:16:187 1168 2c4 Agent * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1 or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1" 2012-09-15 08:14:16:187 1168 2c4 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2012-09-15 08:14:16:187 1168 2c4 Agent * Search Scope = {Machine} 2012-09-15 08:14:16:203 4000 59c COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = MicrosoftUpdate] 2012-09-15 08:14:16:203 4000 59c COMAPI - Updates found = 16 2012-09-15 08:14:16:203 4000 59c COMAPI --------- 2012-09-15 08:14:16:218 4000 59c COMAPI -- END -- COMAPI: Search [ClientId = MicrosoftUpdate] 2012-09-15 08:14:16:218 4000 59c COMAPI ------------- 2012-09-15 08:14:20:843 1168 69c AU AU received install approval from client for 1 updates 2012-09-15 08:14:20:843 1168 69c AU ############# 2012-09-15 08:14:20:843 1168 69c AU ## START ## AU: Install updates 2012-09-15 08:14:20:859 1168 69c AU ######### 2012-09-15 08:14:20:859 1168 69c AU # Initiating manual install 2012-09-15 08:14:20:859 1168 69c AU # Approved updates = 1 2012-09-15 08:14:20:875 1168 2c4 Agent * Added update {0F90F2F5-18A2-412C-AEB9-7F027D6C986D}.104 to search result 2012-09-15 08:14:20:875 1168 2c4 Agent * Found 1 updates and 69 categories in search; evaluated appl. rules of 1326 out of 3469 deployed entities 2012-09-15 08:14:20:875 1168 2c4 Agent ********* 2012-09-15 08:14:20:875 1168 2c4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-09-15 08:14:20:875 1168 2c4 Agent ************* 2012-09-15 08:14:20:875 1168 69c AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {BB25B2FA-1DA6-46EF-BBAD-93AEC822BD21}] 2012-09-15 08:14:20:890 1168 eac AU >>## RESUMED ## AU: Search for updates [CallId = {92AA8321-2BDA-46EA-828E-52D43F3BD58C}] 2012-09-15 08:14:20:890 1168 eac AU # 1 updates detected 2012-09-15 08:14:20:890 1168 280 Agent ************* 2012-09-15 08:14:20:890 1168 280 Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates] 2012-09-15 08:14:20:890 1168 280 Agent ********* 2012-09-15 08:14:20:890 1168 280 Agent * Updates to install = 1 2012-09-15 08:14:20:890 1168 eac AU ######### 2012-09-15 08:14:20:890 1168 eac AU ## END ## AU: Search for updates [CallId = {92AA8321-2BDA-46EA-828E-52D43F3BD58C}] 2012-09-15 08:14:20:890 1168 eac AU ############# 2012-09-15 08:14:20:890 1168 eac AU Featured notifications is disabled. 2012-09-15 08:14:20:906 1168 2c4 Report REPORT EVENT: {F352ECAD-2C8C-4F9A-A225-333B5018F1F0} 2012-09-15 08:13:23:234-0500 1 188 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Sunday, September 16, 2012 at 3:00 AM: - Internet Explorer 8 for Windows XP 2012-09-15 08:14:20:906 1168 2c4 Report REPORT EVENT: {707D1D6E-BA62-438F-B704-0CC083B1FB6C} 2012-09-15 08:13:23:234-0500 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2012-09-15 08:14:20:906 1168 2c4 Report REPORT EVENT: {65C04CE5-D046-4B6F-92F1-E2DF36730338} 2012-09-15 08:14:16:156-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 MicrosoftUpdate Success Software Synchronization Windows Update Client successfully detected 16 updates. 2012-09-15 08:14:20:921 1168 280 Agent * Title = Internet Explorer 8 for Windows XP 2012-09-15 08:14:20:921 1168 280 Agent * UpdateId = {0F90F2F5-18A2-412C-AEB9-7F027D6C986D}.104 2012-09-15 08:14:20:921 1168 280 Agent * Bundles 2 updates: 2012-09-15 08:14:20:921 1168 280 Agent * {114743B0-0F07-4000-8C51-BE808D819516}.104 2012-09-15 08:14:20:921 1168 280 Agent * {81B41B2D-E98D-4DFE-9CB7-E88AE50E9B42}.104 2012-09-15 08:14:25:078 1168 280 Handler Attempting to create remote handler process as RAY\Ray in session 0 2012-09-15 08:14:25:250 1168 280 DnldMgr Preparing update for install, updateId = {114743B0-0F07-4000-8C51-BE808D819516}.104. 2012-09-15 08:14:27:453 1256 528 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0500) =========== 2012-09-15 08:14:27:453 1256 528 Misc = Process: C:\WINDOWS\system32\wuauclt.exe 2012-09-15 08:14:27:453 1256 528 Misc = Module: C:\WINDOWS\system32\wuaueng.dll 2012-09-15 08:14:27:453 1256 528 Handler ::::::::::::: 2012-09-15 08:14:27:453 1256 528 Handler :: START :: Handler: Command Line Install 2012-09-15 08:14:27:453 1256 528 Handler ::::::::: 2012-09-15 08:14:27:453 1256 528 Handler : Updates to install = 1 2012-09-15 08:14:35:062 676 684 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0500) =========== 2012-09-15 08:14:35:062 676 684 Misc = Process: c:\cac6f883a91a15abdac3e9\update\iesetup.exe 2012-09-15 08:14:35:062 676 684 Misc = Module: C:\WINDOWS\system32\wuapi.dll 2012-09-15 08:14:35:062 676 684 COMAPI ------------- 2012-09-15 08:14:35:062 676 684 COMAPI -- START -- COMAPI: Search [ClientId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:35:062 676 684 COMAPI --------- 2012-09-15 08:14:35:078 1168 2c4 Agent ************* 2012-09-15 08:14:35:078 1168 2c4 Agent ** START ** Agent: Finding updates [CallerId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:35:078 1168 2c4 Agent ********* 2012-09-15 08:14:35:078 1168 2c4 Agent * Online = Yes; Ignore download priority = No 2012-09-15 08:14:35:078 1168 2c4 Agent * Criteria = "IsInstalled=0 and Type='Software' and CategoryIDs contains '5312e4f1-6372-442d-aeb2-15f2132c9bd7'" 2012-09-15 08:14:35:078 1168 2c4 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service 2012-09-15 08:14:35:078 1168 2c4 Agent * Search Scope = {Machine} 2012-09-15 08:14:35:078 676 684 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:35:078 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2012-09-15 08:14:35:093 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:156 1168 2c4 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194 2012-09-15 08:14:35:156 1168 2c4 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194 2012-09-15 08:14:35:156 1168 2c4 Misc WARNING: DownloadFileInternal failed for http://download.windowsupdate.com/v9/1/windowsupdate/redir/muv4wuredir.cab: error 0x80190194 2012-09-15 08:14:35:156 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2012-09-15 08:14:35:171 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:312 1168 2c4 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194 2012-09-15 08:14:35:312 1168 2c4 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194 2012-09-15 08:14:35:312 1168 2c4 Misc WARNING: DownloadFileInternal failed for http://download.microsoft.com/v9/1/windowsupdate/redir/muv4wuredir.cab: error 0x80190194 2012-09-15 08:14:35:312 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2012-09-15 08:14:35:312 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:406 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab: 2012-09-15 08:14:35:421 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:437 1168 2c4 Agent Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/1/microsoftupdate/redir/muauth.cab 2012-09-15 08:14:35:437 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab: 2012-09-15 08:14:35:437 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:578 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab: 2012-09-15 08:14:35:593 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:687 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:35:718 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:765 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:35:781 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:781 1168 2c4 PT +++++++++++ PT: Starting category scan +++++++++++ 2012-09-15 08:14:35:781 1168 2c4 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2012-09-15 08:14:35:906 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:35:921 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:968 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:35:984 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:35:984 1168 2c4 PT +++++++++++ PT: Synchronizing server updates +++++++++++ 2012-09-15 08:14:35:984 1168 2c4 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2012-09-15 08:14:37:250 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:37:265 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:37:312 1168 2c4 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab: 2012-09-15 08:14:37:328 1168 2c4 Misc Microsoft signed: Yes 2012-09-15 08:14:37:328 1168 2c4 PT +++++++++++ PT: Synchronizing extended update info +++++++++++ 2012-09-15 08:14:37:328 1168 2c4 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2012-09-15 08:14:37:453 784 314 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2010/06/3888874_6c6699387d7465bc17c02cc31a660b216427fc78.cab for file bGaZOH10ZbwXwCzDGmYLIWQn/Hg= when file has not been previously added to the datastore 2012-09-15 08:14:37:468 784 314 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/12/4876484_606d98885a70abb9e5e7f3821682cf5541b17c27.cab for file YG2YiFpwq7nl5/OCFoLPVUGxfCc= when file has not been previously added to the datastore 2012-09-15 08:14:37:468 784 314 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2012/08/5179550_0e825c9da8f36ff2addcbbf4089e12bff764e0a0.cab for file DoJcnajzb/Kt3Lv0CJ4Sv/dk4KA= when file has not been previously added to the datastore 2012-09-15 08:14:37:937 1168 2c4 Agent * Added update {551EF226-28CF-44D9-B318-4959C2B73B26}.100 to search result 2012-09-15 08:14:37:937 1168 2c4 Agent * Added update {955266A7-6210-4C18-BAEF-0E8244D975A9}.100 to search result 2012-09-15 08:14:37:937 1168 2c4 Agent * Added update {797D3C3F-CFD2-4D26-BB52-BE038205C7C4}.105 to search result 2012-09-15 08:14:37:937 1168 2c4 Agent * Added update {EDB28194-3635-480E-A069-1D1984CCB2AB}.102 to search result 2012-09-15 08:14:37:937 1168 2c4 Agent * Found 4 updates and 5 categories in search; evaluated appl. rules of 52 out of 65 deployed entities 2012-09-15 08:14:37:937 1168 2c4 Agent ********* 2012-09-15 08:14:37:937 1168 2c4 Agent ** END ** Agent: Finding updates [CallerId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:37:937 1168 2c4 Agent ************* 2012-09-15 08:14:37:953 676 8cc COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:37:953 676 8cc COMAPI - Updates found = 4 2012-09-15 08:14:37:953 676 8cc COMAPI --------- 2012-09-15 08:14:37:953 676 8cc COMAPI -- END -- COMAPI: Search [ClientId = Windows Internet Explorer 8 Setup Utility] 2012-09-15 08:14:37:953 676 8cc COMAPI ------------- 2012-09-15 08:14:42:937 1168 2c4 Report REPORT EVENT: {88008109-CF47-404E-940D-6C21A85DFF64} 2012-09-15 08:14:37:937-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 Windows Internet Explorer 8 Set Success Software Synchronization Windows Update Client successfully detected 4 updates. I could upload the entire WindowsUpdate.log file to dropbox if required.

    Read the article

  • Ubuntu dual monitor set up - taskbars appear on other monitor

    - by DisgruntledGoat
    I'm trying to get my TV (connected via HDMI cable) to act as a second monitor to watch video etc. The TV is to my left, so in Display Preferences I unticked "Mirror Screens" and put the monitors like this: -------- ---------- | PC | | TV | | | ---------- -------- When I do this, the PC monitor comes up with just the desktop wallpaper and the interface - taskbar and windows, etc - moves to the TV screen. But if I swap the monitors around, the taskbars are still on the TV screen, with the windows (and desktop icons) on the PC screen. Is there a way to set the computer monitor as the main one and the TV as the second screen? PC: Dell Inspiron 531 Monitor: Samsung SyncMaster 720N TV: Philips 26PFL5522D LCD TV

    Read the article

  • Toshiba Portege M400 screen rotation not working under Windows 7 x64

    - by Christi
    I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

    Read the article

  • Prosody mod auth external not working

    - by Yang
    I installed mod_auth_external for 0.8.2 on ubuntu 12.04 but it's not working. I have external_auth_command = "/home/yang/chat/testing" but it's not getting invoked. I enabled debug logging and see no messages from that mod. Any help? I'm using the Candy example client. Here's what's written to the log after I submit a login request (and nothing in err log): Oct 24 21:02:43 socket debug server.lua: accepted new client connection from 127.0.0.1:40527 to 5280 Oct 24 21:02:43 mod_bosh debug BOSH body open (sid: %s) Oct 24 21:02:43 boshb344ba85-fbf5-4a26-b5f5-5bd35d5ed372 debug BOSH session created for request from 169.254.11.255 Oct 24 21:02:43 mod_bosh info New BOSH session, assigned it sid 'b344ba85-fbf5-4a26-b5f5-5bd35d5ed372' Oct 24 21:02:43 httpserver debug Sending response to bf9120 Oct 24 21:02:43 httpserver debug Destroying request bf9120 Oct 24 21:02:43 httpserver debug Request has destroy callback Oct 24 21:02:43 socket debug server.lua: closed client handler and removed socket from list Oct 24 21:02:43 mod_bosh debug Session b344ba85-fbf5-4a26-b5f5-5bd35d5ed372 has 0 out of 1 requests open Oct 24 21:02:43 mod_bosh debug and there are 0 things in the send_buffer Oct 24 21:02:43 socket debug server.lua: accepted new client connection from 127.0.0.1:40528 to 5280 Oct 24 21:02:43 mod_bosh debug BOSH body open (sid: b344ba85-fbf5-4a26-b5f5-5bd35d5ed372) Oct 24 21:02:43 mod_bosh debug Session b344ba85-fbf5-4a26-b5f5-5bd35d5ed372 has 1 out of 1 requests open Oct 24 21:02:43 mod_bosh debug and there are 0 things in the send_buffer Oct 24 21:02:43 mod_bosh debug Have nothing to say, so leaving request unanswered for now Oct 24 21:02:43 httpserver debug Request c295d0 left open, on_destroy is function(mod_bosh.lua:81) Here's the config I added: modules_enabled = { ... "bosh"; -- Enable BOSH clients, aka "Jabber over HTTP" ... } authentication = "external" external_auth_protocol = "generic" external_auth_command = "/home/yang/chat/testing"

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • Unable to set nginx to serve my staging website

    - by user100778
    I'm having some troubles setting up nginx to serve my staging website. What I did is change the server_name but for some reasons it just doesn't work. The url scheme is "domain.foo" is production, "staging.domain.foo" is staging, "foobar.domain.foo" is a web service, "foobar.staging.domain.foo" is the staging version of the same webserver, ".domain.foo" is routed to serve some s3 static HTML, ".staging.domain.foo" is routed to serve some s3 static HTML in another bucket. All production urls work and are correctly configured, all staging urls doesn't work. Here is my conf file. You will see some duplication, I will gladly accept any correction/optimization, I'm a coder and configuring servers is definitely not my thing (but I'm eager to learn and improve...). server { listen 80; ## listen for ipv4 server_name "domain.foo" "www.domain.foo" default_server; access_log /var/log/nginx/access.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; location ~* \.(jpg|jpeg|gif|png|ico|css|bmp|js|html)$ { access_log off; expires max; root /home/foo/Foo/current/public; break; } if ($host ~ 'www.domain.foo') { rewrite ^/(.*)$ http://domain/foo/$1 permanent; } proxy_pass http://production; break; } } server { listen 80; server_name "staging.domain.foo"; access_log /var/log/nginx/access.staging.log; error_log /var/log/nginx/error.staging.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://staging; break; } } server { listen 80; ## listen for ipv4 server_name "foobar.domain.foo"; access_log /var/log/nginx/access.log; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if ($host = 'foobar.domain.foo') { proxy_pass http://foobar; break; } } } server { listen 80; ## listen for ipv4 server_name foobar.staging.domain.foo; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://foobar_staging; break; } } server { listen 80; server_name "~^(.+)\.domain\.foo$"; location / { proxy_intercept_errors on; error_page 404 = http://domain.foo/404; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.domain.foo.s3.amazonaws.com; } } server { listen 80; server_name "~^(.+)\.staging\.domain\.foo$"; location / { proxy_intercept_errors on; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.staging.domain.foo.s3.amazonaws.com; } } upstream production { server 111.255.111.110:8000; server 111.255.111.110:8001; server 111.255.111.110:8002; server 111.255.111.110:8003; } upstream staging { server 222.255.222.222:8000; server 222.255.222.222:8001; } upstream foobar { server 111.255.222.165:9000; server 111.255.222.165:9001; server 111.255.222.165:9002; } upstream foobar_staging { server 222.255.222.222:9000; } What happens now when I point my browser to staging.domain.foo is that it hangs. Can't find anything in the logs, but for example the access.staging.log and errors.staging.log are created. Anybody has an idea? :)

    Read the article

  • Windows 7: Touch gestures in IE not working without explorer.exe being run once

    - by Michael
    Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly? Thanks!

    Read the article

  • Apache2 Enabling Includes module causes svn access to quit working

    - by Matthew Talbert
    I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

    Read the article

  • Set Error-Pages for all Applications in Tomcat

    - by user38511
    I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

    Read the article

  • Virtual Box Pen Test Lab Set Up

    - by hairyjewbear
    So i'm trying to set up a pen test lab in virtual box on my windows 7 host. I have 3 guest OS's installed: 1.) BackTrack5 2.) Centos 5 Server/Snort (My Snortbox) 3.) Win XP (Unpatched) I have 3 Ethernet adapters created IP'S 192.168.191.1 192.168.127.1 192.168.56.1 My goal is to use BackTrack5 to nmap the Win XP guest and have the snort box sniff the network. I'm new to networking and virtualization and I need help setting up my virtual network to get this to work. What should I do? All help appreciated Centos: Adapter1: NAT Adapter2: Host-only Adapter3: Internal Network Backtrack: Adapter1: Internal Network XP: Adapter1: Internal Network Also take for granted I'm on a University Network with a ridiculous firewall so I need to stay all within the host

    Read the article

  • Set up iis7.5 to deny connections outside of LAN for certain folder

    - by Darkcat Studios
    Im setting up a combined website and extranet currently, they both read from the same database on the same server as the site is hosted on. The reason being that the website is fed from the data that the staff plug into the extranet interface. it also links in to AD for authorising access to the extranet. I have the extranet in a folder within the website folder. What I want to do is only allow the extranet to be accessed from computers within our LAN, but allow the main website to be freely accessible to internet users. I have it set up as a generic web server currently, so anyone can view anything (well up to the point where the user is asked to log into the extranet of course! I have read a lot on this but nothing I read applies to, or works in IIS7.5

    Read the article

  • MySQL socket connections working, but not port connections

    - by Neil
    I installed MySQL community 5.1.45 on my Snow Leopard 10.6, using the pkg from their site. I had previously installed a MySQL binary from entropy.ch. In the previous installation, the connections were working fine before I upgrade to Snow Leopard. In Snow Leopard, both the installations are problematic. Using an app called Sequel Pro, if I connect with the socket operation, it connects properly. However, a standard connection with the same credentials doesn't work. From what I've understood, socket connections happen on the machine itself between processes, whereas normal connections occur over the network/ports, in this case a loopback to my machine, since the server and client are both on the same machine. My new CakePHP installation isn't being able to connect to the db with the root credentials I provided. Btw, I've been starting the MySQL server using the Preference Pane. When I tried running mysqld from terminal, it gave me: 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test 100323 1:54:37 [Warning] Can't create test file /usr/local/mysql-5.1.45-osx10.6-x86_64/data/mbp.lower-test mysqld: Can't change dir to '/usr/local/mysql-5.1.45-osx10.6-x86_64/data/' (Errcode: 13) 100323 1:54:37 [ERROR] Aborting 100323 1:54:37 [Note] mysqld: Shutdown complete mbp is the name of my machine. How do I fix this so that my webserver can connect to the mysql server?

    Read the article

  • Why are symbolic links not working in MySQL?

    - by Eno
    I'm having an issue, I searched a lot but I'm not sure if it's related to a previous security patch. On the last version of MySQL on Debian Lenny ( 5.0.51a-24 ) I need to share one table between two db, those two db are in the same path ( /var/lib/mysql/db1 & db2 ). I created symbolic links for db2 pointing to the table in db1. When I query the same table from db2 I get this : 'ERROR 1030 (HY000): Got error 140 from storage engine' This is how it looks : test-lan:/var/lib/mysql/test3# ls -alh drwx------ 2 mysql mysql 4.0K 2010-08-30 13:28 . drwxr-xr-x 6 mysql mysql 4.0K 2010-08-30 13:29 .. lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.frm -> /var/lib/mysql/test/blbl.frm lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.MYD -> /var/lib/mysql/test/blbl.MYD lrwxrwxrwx 1 mysql mysql 28 2010-08-30 13:28 blbl.MYI -> /var/lib/mysql/test/blbl.MYI -rw-rw---- 1 mysql mysql 65 2010-08-30 13:24 db.opt I really need those symlinks, is there a way to make them working like before ? ( old MySQL-server is fine ) Thanks,

    Read the article

  • Can't make virtual host working

    - by sica07
    I have to create a virtual host on a server which, previously hosted a single website (domain name). Now I'm trying to add a second domain on this server (using the same nameserver). What I've done so far: Initially there was no virtual host so I've made one for the second domain: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /var/www/bla ServerName www.blabla.com ServerAlias blabla.com <Directory /var/www/blabla> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> Because nothing happend, I changed the DocumentRoot of the apache server to /var/www (initially was the root document of the first website -/var/www/html) and created a virtual host for the first domain too: <VirtualHost *:80> DocumentRoot /var/www/html ServerName www.first.com ServerAlias first.com <Directory /var/www/html> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> In this case, first.com is working ok, but bla.com not. When I ping blabla.com I get the "unkown host" response. What am I doing wrong? Do I have to modify something in the DNS settings too? Thank you.

    Read the article

  • Limit vsftp upload to a given set of file-names

    - by Chen Levy
    I need to configure an anonymous ftp with upload. Given this requirement I try to lock this server down to the bear minimum. One of the restrictions I wish to impose is to enable the upload of only a given set of file-names. I tried to disallow write permission to the upload folder, and put in it some empty files with write permission: /var/ftp/ [root.root] [drwxr-xr-x] |-- upload/ [root.root] [drwxr-xr-x] | |-- upfile1 [ftp.ftp] [--w-------] | `-- upfile2 [ftp.ftp] [--w-------] `-- download/ [root.root] [drwxr-xr-x] `-- ... But this approach didn't work because when I tried to upload upfile1, it tried to delete and create a new file in its' place, and there is no permissions for that. Is there a way to make this work, or perhaps use a different approach like abusing the deny_file option?

    Read the article

  • NFS4 permission denied when userid does not match (even though idmap is working)

    - by SystemParadox
    I have NFS4 setup with idmapd working correctly. ls -l from the client shows the correct user names, even though the user ids differ between the machines. However, when the user ids do not match, I get 'permission denied' errors trying access files, even though ls -l shows the correct username. When the user ids do happen to match by coincidence, everything works fine. sudo sysctl -w sunrpc.nfsd_debug=1023 gives the following output in the server syslog for the failed file access: nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/3: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 3 #1: 22: status 0 nfsv4 compound op #2/3: 3 (OP_ACCESS) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #2: 3: status 0 nfsv4 compound op #3/3: 9 (OP_GETATTR) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #3: 9: status 0 nfsv4 compound returned 0 nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/7: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 7 #1: 22: status 0 nfsv4 compound op #2/7: 32 (OP_SAVEFH) nfsv4 compound op ffff88003d0f5078 opcnt 7 #2: 32: status 0 nfsv4 compound op #3/7: 18 (OP_OPEN) NFSD: nfsd4_open filename dom_file op_stateowner (null) renewing client (clientid 4f96587d/0000000e) nfsd: nfsd_lookup(fh 28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba, dom_file) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsd: fh_lock(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) locked = 0 nfsd: fh_compose(exp 08:01/22806529 srv/dom_file, ino=22809724) nfsd: fh_verify(36: 01070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking fh_verify: srv/dom_file permission failure, acc=804, error=13 nfsv4 compound op ffff88003d0f5078 opcnt 7 #3: 18: status 13 nfsv4 compound returned 13 Is that useful to anyone? Any hints on to debug this would be greatly appreciated. Server kernel: 2.6.32-40-server (Ubuntu 10.04) Client kernel: 3.2.0-27-generic (Ubuntu 12.04) Same problem with my new server running 3.2.0-27-generic (Ubuntu 12.04). Thanks.

    Read the article

  • Apache > 2.2.22 rewrite rule not working?

    - by EBAH
    since yesterday I'm trying to figure out how to fix the following: running phpipam (http://www.phpipam.net/) with WAMP (Windows environment). The problem I am facing is related with RewriteRule functionality, so forget phpipam for a moment and concentrate on few lines of code. Here is the directory structure of my test website that emulate the first steps phpipam does (you can download http://goo.gl/ksvuGc): C:\wamp\www\rewrite-tst\ C:\wamp\www\rewrite-tst\.htaccess C:\wamp\www\rewrite-tst\index.php C:\wamp\www\rewrite-tst\install C:\wamp\www\rewrite-tst\install\index.php It seems that the following rewrite rule in .htaccess doesn't work: C:\wamp\www\rewrite-tst\.htaccess # install RewriteRule ^install$ install/ [R] RewriteRule ^install/$ index.php?page=install When opening C:\wamp\www\rewrite-tst\index.php the first step check the URL for "install" argument. Since the URL is: http://localhost/rewrite-tst no arguments are supplied and the browser is redirected to: header("Location: /rewrite-tst/install/") At this point the browser opens the page: C:\wamp\www\rewrite-tst\install\index.php >> http://localhost/rewrite-tst/install Apache, thanks to C:\wamp\www\rewrite-tst.htaccess should intercept this URL and redirect to: http://localhost/rewrite-tst/index.php?page=install Here are my tries: Win Apache 2.2.22: works Win Apache 2.4.4: KO Win Apache 2.4.6: KO In the attached zip file you can also find two traces from apache RewriteLog which I can't understand very well. Why Apache 2.4 doesn't work on Windows? Is it possible that there's a bug on Windows version of Apache (2.4.4 and 2.4.6) or am I wrong someway? Thanks for your help!!! Evan -- UPDATE 12 oct 2013 Now I'm really confused! Working on Linux, Kubuntu 13.04. Linux Apache 2.2.22: works Linux Apache 2.4.6: KO I guess there's something wrong in my rules at this point, or some change happened from Apache 2.2 to 2.4 ...

    Read the article

  • Plesk wildcard subdomain not working

    - by avdgaag
    I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

    Read the article

  • How to set up a software VPN when moving a server to the cloud

    - by Neal L
    I work in a small company with one office in Dallas and another in Los Angeles. We run a Fedora server at our Dallas location and use a Linksys RV042 at each location to create a VPN connection between the sites. Every time the power or internet goes out in Dallas, our server is inaccessible so the entire company goes down. Because of this, we would like to use a shared server in the cloud (something like Linode) to avoid this problem. As a relative novice to VPN configurations, I would like to know if it is possible to set up a software VPN on the cloud server and connect our local networks in Dallas and LA to that VPN. I've read about openvpn and ssh vpns, but I don't know it is the best option. Could anyone with some experience point me in the right direction on the right combination of software VPN and hardware for this? We're open to new hardware to make this happen. Thanks!

    Read the article

  • VSFTPD Unable to set write permissions on folder

    - by Frank Astin
    I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >