Search Results

Search found 92127 results on 3686 pages for 'user folders'.

Page 965/3686 | < Previous Page | 961 962 963 964 965 966 967 968 969 970 971 972  | Next Page >

  • Recommended CPU upgrade for Dell Vostro 220 with E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • Questions about norton ghost

    - by Nrew
    I have used norton ghost to backup my hard drive. And it came up with a .v2i file. Will I be able to use this backup from my pc to my laptop? Can I use this backup to restore my dual boot pc back in shape. If the mbr is destroyed/damaged? Can I use this backup to restore my os and applications on the same machine if the machine's hard drive is reformatted?

    Read the article

  • Apache server configuration name resolution (virtual host naming + security)

    - by Homunculus Reticulli
    I have just setup a minimal (hopefully secure? - comments welcome) apache website using the following configuration file: <VirtualHost *:80> ServerName foobar.com ServerAlias www.foobar.com ServerAdmin [email protected] DocumentRoot /path/to/websites/foobar/web DirectoryIndex index.php # CustomLog with format nickname LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.access.log" common LogLevel notice ErrorLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.errors.log" <Directory /> AllowOverride None Order Deny,Allow Deny from all </Directory> <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I am able to access the website by using www.foobar.com, however when I type foobar.com, I get the error 'Server not found' - why is this? My second question concerns the security implications of the directive: <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> in the configuration above. What exactly is it doing, and is it necessary?. From my (admitedly limited) understanding of Apache configuration files, this means that anyone will be able to access (write to?) the /path/to/websites/ folder. Is my understanding correct? - and if yes, how is this not a security risk?

    Read the article

  • Active directory Kerberos OSX problems

    - by Temotodochi
    I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

    Read the article

  • Merging paragraphs in MS Word 2007

    - by Rajneesh Jain
    My name is Rajneesh Jain from New Delhi, India. I saw your code on merging and re-formatting paragraphs in MS Word 2007. I am facing problem of text overflow. The code I used is: Sub FixParagraph() ' ' FixParagraph Macro ' ' Dim selectedText As String Dim textLength As Integer selectedText = Selection.Text ' If no text is selected, this prevents this subroutine from typing another ' copy of the character following the cursor into the document If Len(selectedText) <= 1 Then Exit Sub End If ' Replace all carriage returns and line feeds in the selected text with spaces selectedText = Replace(selectedText, vbCr, " ") selectedText = Replace(selectedText, vbLf, " ") ' Get rid of repeated spaces Do textLength = Len(selectedText) selectedText = Replace(selectedText, " ", " ") Loop While textLength <> Len(selectedText) ' Replace the selected text in the document with the modified text Selection.TypeText (selectedText) End Sub

    Read the article

  • Using a PivotTable to Count Items in Access

    - by Sandra
    I have a list of text entries and I want to count how often each entry appears in the list. e.g. Berlin Paris London London Paris Paris Paris The result would be Berlin 1 Paris 4 London 2 This result easy do to achieve with an pivot table in MS Excel (see: Count Items in Excel). My data not in spreadsheet in Excel but in a MS Access database table. So in order to avoid constant switching between Access and Excel and I would like to handle everything in Access (either Access 2007 or 2010). I know there are pivot tables in Access and I know how to display one, but I was unable to find out how to count the number of occurrences. Thank you!

    Read the article

  • Automate backing up e-mails in Outlook Express

    - by Michael Itzoe
    My client is a small business (three employees) that uses Outlook Express. They'd like to back up their email. I showed them how to export, but they balked at that. Is there a way I can automate exporting email? They already have a batch file they use that zips a copy of their data and I'd like to be able to add something to that to include email. Is this possible?

    Read the article

  • Word 2007 Question

    - by Lijo
    Hi Team, While preparing a Word 2007 document, I made a mistake. (Not to say I don't have any other copy of the document) While formatting (as a try) I applied the style "Apply Style to Body to match selection". This caused the document to go totally in a wronfg format - having numbers even in tables. Have you ever faced this? Could you please tell how to correct it? Thanks Lijo

    Read the article

  • Word 2007 Question

    - by Lijo
    Hi Team, While preparing a Word 2007 document, I made a mistake. (Not to say I don't have any other copy of the document) While formatting (as a try) I applied the style "Apply Style to Body to match selection". This caused the document to go totally in a wronfg format - having numbers even in tables. Have you ever faced this? Could you please tell how to correct it? Hope you would be kind enough to answer this even though it is not striclty technical. Thanks Lijo

    Read the article

  • Firefox addon that redirects broken link or bad-addresses to Google [closed]

    - by infant programmer
    I want Firefox to redirect bad and broken links to Google search instead of the "Can't find the server" page. If it takes an add-on, that's okay. When you enter a bad or broken link in Google Chrome, the browser takes you to a search results page with all possibly relevant links to the request attempted. Please don't suggest the search-tool-bar, I am aware of it. And it's not really significant in this scenario.

    Read the article

  • Edimax wireless router is not providing DNS services correctly

    - by Nathan Fellman
    I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

    Read the article

  • How to stop RAID5 array while it is shown to be busy?

    - by RCola
    I have a raid5 array and need to stop it, but while trying to stop it getting error. # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sde1[3](F) sdc1[4](F) sdf1[2] sdd1[1] 2120320 blocks level 5, 32k chunk, algorithm 2 [3/2] [_UU] unused devices: <none> # mdadm --stop mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: No devices given. # mdadm --stop /dev/md0 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: fail to stop array /dev/md0: Device or resource busy and # lsof | grep md0 md0_raid5 965 root cwd DIR 8,1 4096 2 / md0_raid5 965 root rtd DIR 8,1 4096 2 / md0_raid5 965 root txt unknown /proc/965/exe # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sde1[3](F) sdc1[4](F) sdf1[2] sdd1[1] 2120320 blocks level 5, 32k chunk, algorithm 2 [3/2] [_UU] # grep md0 /proc/mdstat md0 : active raid5 sde1[3](F) sdc1[4](F) sdf1[2] sdd1[1] # grep md0 /proc/partitions 9 0 2120320 md0 While booting, md1 is mounted ok but md0 failed for some unknown reason # dmesg | grep md[0-9] [ 4.399658] raid5: allocated 3179kB for md1 [ 4.400432] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 4.400678] md1: detected capacity change from 0 to 2121793536 [ 4.403135] md1: unknown partition table [ 38.937932] Filesystem "md1": Disabling barriers, trial barrier write failed [ 38.941969] XFS mounting filesystem md1 [ 41.058808] Ending clean XFS mount for filesystem: md1 [ 46.325684] raid5: allocated 3179kB for md0 [ 46.327103] raid5: raid level 5 set md0 active with 2 out of 3 devices, algorithm 2 [ 46.330620] md0: detected capacity change from 0 to 2171207680 [ 46.335598] md0: unknown partition table [ 46.410195] md: recovery of RAID array md0 [ 117.970104] md: md0: recovery done. # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sde1[0] sdf1[2] sdd1[1] 2120320 blocks level 5, 32k chunk, algorithm 2 [3/3] [UUU] md1 : active raid5 sdc2[0] sdf2[2] sde2[3](S) sdd2[1] 2072064 blocks level 5, 128k chunk, algorithm 2 [3/3] [UUU]

    Read the article

  • How to save Word documents as HTML to be viewed in Firefox

    - by private_meta
    I'm in need for saving a Word document as HTML. It has some background images, other images, texts, ... It opens correctly in Internet Explorer, but how can I save a word doc as HTML so that Firefox and other current browsers render it correctly? All images are missing in the document. I looked through the generated html document, but the paths for the images appear to be correct. Any idea? Things like "Don't save docs as html" won't be helpful here. Edit: To make myself clear, the normal "Save as HTML" doesn't cut it, the result is broken in any browser other than Internet Explorer. Edit 2: What I'm using is Word 2010 and Firefox 4. I also tried rendering it in the latest Chrome version, which failed as well. I used different compatibility settings for saving as html, it did not help

    Read the article

  • Serial port access errors in WINE

    - by goldenmean
    Hello, I have a setup in which I use a USB serial adapter + some application which sends and receives data using that serial usb. But this setup which works on a Windows, or even in a VMWare Virtual windows, does not work under WINE. IT transmits data but i cannot receive data. The cable and the applications are same as in the working and non-working scenarios. I guess The fact that the application works over the USB serial cable just as fine under Virtual Windows(VMware running on linux) by mapping /dev/ttyUSB to the com port, no external software/DLL needed, means it does not need any specific driver. (Am I correct in this assumption that application doesnt need any driver?) (I also tried with a different setup(different USB serial adapter + different application under WINE, but even that does not work under WINE, but it works fine under WIndows/Virtual Windows) How can I get it working under WINE? Any pointers appreciated.

    Read the article

  • Considering building a new system; but undecided about chassis

    - by J.C. Bengtson
    I'm considering a new system build, and was thinking that this particular motherboard has features I need and like: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=667651&pagenumber=1&RSort=1&csid=ITD&recordsPerPage=5&body=REVIEWS#CustomerReviewsBlock .. but am unsure which model chassis to pair it with. I'd strongly prefer something from Cooler Master, as I'm a fan of their products, but am having a hard time deciding, and also don't want to get into some odd situation where the board doesn't properly fit. I plan on having two optical drives (5.25"), two internal HDs (3.5"), and will likely go with an SLI setup of 2 or possibly even 3 cards, so I'd need a chassis that is roomy enough to accomodate all of that, as well as the motherboard itself. Based on the stock available at that same site, do you all have any suggestions? The larger, the better, as I hate having components crammed together. Your help is most appreciated!

    Read the article

  • Netbook without Windows?

    - by drewk
    I have been looking around for a netbook without Windows and with Ubuntu preinstalled. Almost all I have seen have Windows. The main issue is making sure that the computer ships with the right Ubuntu drivers and, hopefully, saving a little without having to pay for Windows. So far, I cannot find one.

    Read the article

  • What would an Outlook 2007 macro to automate Paste Special - Unformatted Text look like?

    - by Gary Petersen
    I'd like to assign a macro in Outlook 2007 to a Toolbar button that would execute the equivalent of these clicks when there is formatted text in the Windows clipboard: Click the Paste icon by the bottom arrow Click the Paste Special link. Click the Unformatted Text link. I have similar macros in Excel 2007 and Word 2007 but haven't been able to get one to work in Outlook 2007 / VBA. What would the VBA code for such a macro be?

    Read the article

  • Can the XP 'Computer Locked' dialog box be customized?

    - by sadmicrowave
    I'd like to customize the 'computer locked' dialog box in XP to be more graphic oriented, is there any way to do this, or perhaps just change the colors of the box? Also, I'm running dual monitors and would like the box to be positioned in the center of the two screens rather than in the center of Monitor 1 (main). Can this be done?

    Read the article

  • WPA Connection problem

    - by Renjith G
    hi , I am using hostapd,wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board and my desktop PC, WINDOWS XP SP2) (with OLITEC wireless usb)are fine. But when i configured the WPA type, connection established but it is showing the status in the secuirity dialog box "TKIP - Key Absent" Can any one faced this problem?? /renjith g

    Read the article

  • DNS server at router level vs. computer level

    - by Craig
    I've three questions. Is it better/faster/optimal to set up your server's preferred and alternate DNS servers in your OS's network settings or in your router settings? Will it cause problems if it is set up in both places, both pointing to the same IPs? I am running Windows and I have my network assign a static IP to one of my computers. This doesn't allow me to obtain the DNS server addresses from my router automatically. Is there an IP I can put in that will cause it to take the DNS server addresses from the router?

    Read the article

< Previous Page | 961 962 963 964 965 966 967 968 969 970 971 972  | Next Page >