Search Results

Search found 25584 results on 1024 pages for 'visual style renderer'.

Page 967/1024 | < Previous Page | 963 964 965 966 967 968 969 970 971 972 973 974  | Next Page >

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• Access Control Service v2: Registering Web Identities in your Applications [concepts]

  - by Your DisplayName here!

  ACS v2 support two fundamental types of client identities– I like to call them “enterprise identities” (WS-*) and “web identities” (Google, LiveID, OpenId in general…). I also see two different “mind sets” when it comes to application design using the above identity types: Enterprise identities – often the fact that a client can present a token from a trusted identity provider means he is a legitimate user of the application. Trust relationships and authorization details have been negotiated out of band (often on paper). Web identities – the fact that a user can authenticate with Google et al does not necessarily mean he is a legitimate (or registered) user of an application. Typically additional steps are necessary (like filling out a form, email confirmation etc). Sometimes also a mixture of both approaches exist, for the sake of this post, I will focus on the web identity case. I got a number of questions how to implement the web identity scenario and after some conversations it turns out it is the old authentication vs. authorization problem that gets in the way. Many people use the IsAuthenticated property on IIdentity to make security decisions in their applications (or deny user=”?” in ASP.NET terms). That’s a very natural thing to do, because authentication was done inside the application and we knew exactly when the IsAuthenticated condition is true. Been there, done that. Guilty ;) The fundamental difference between these “old style” apps and federation is, that authentication is not done by the application anymore. It is done by a third party service, and in the case of web identity providers, in services that are not under our control (nor do we have a formal business relationship with these providers). Now the issue is, when you switch to ACS, and someone with a Google account authenticates, indeed IsAuthenticated is true – because that’s what he is! This does not mean, that he is also authorized to use the application. It just proves he was able to authenticate with Google. Now this obviously leads to confusion. How can we solve that? Easy answer: We have to deal with authentication and authorization separately. Job done ;) For many application types I see this general approach: Application uses ACS for authentication (maybe both enterprise and web identities, we focus on web identities but you could easily have a dual approach here) Application offers to authenticate (or sign in) via web identity accounts like LiveID, Google, Facebook etc. Application also maintains a database of its “own” users. Typically you want to store additional information about the user In such an application type it is important to have a unique identifier for your users (think the primary key of your user database). What would that be? Most web identity provider (and all the standard ACS v2 supported ones) emit a NameIdentifier claim. This is a stable ID for the client (scoped to the relying party – more on that later). Furthermore ACS emits a claims identifying the identity provider (like the original issuer concept in WIF). When you combine these two values together, you can be sure to have a unique identifier for the user, e.g.: Facebook-134952459903700\799880347 You can now check on incoming calls, if the user is already registered and if yes, swap the ACS claims with claims coming from your user database. One claims would maybe be a role like “Registered User” which can then be easily used to do authorization checks in the application. The WIF claims authentication manager is a perfect place to do the claims transformation. If the user is not registered, show a register form. Maybe you can use some claims from the identity provider to pre-fill form fields. (see here where I show how to use the Facebook API to fetch additional user properties). After successful registration (which may include other mechanisms like a confirmation email), flip the bit in your database to make the web identity a registered user. This is all very theoretical. In the next post I will show some code and provide a download link for the complete sample. More on NameIdentifier Identity providers “guarantee” that the name identifier for a given user in your application will always be the same. But different applications (in the case of ACS – different ACS namespaces) will see different name identifiers. This is by design to protect the privacy of users because identical name identifiers could be used to create “profiles” of some sort for that user. In technical terms they create the name identifier approximately like this: name identifier = Hash((Provider Internal User ID) + (Relying Party Address)) Why is this important to know? Well – when you change the name of your ACS namespace, the name identifiers will change as well and you will will lose your “connection” to your existing users. Oh an btw – never use any other claims (like email address or name) to form a unique ID – these can often be changed by users.

  Read the article

• Using Resources the Right Way

  - by BuckWoody

  It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well –  that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think.   In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them.   Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address:  [email protected]   End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

  Read the article

• Common reasons for the &lsquo;Sys is undefined&rsquo; error in ASP.NET Ajax applications

    In this blog I will try to summarize the most common reasons for getting the famous 'Sys is undefined' error when running an Ajax enabled web site or application (there are almost one milion results on Google for that phrase). Where does it come from? In every Ajax web pages source you will see a code like this: <script type="text/javascript"> //<![CDATA[ Sys.WebForms.PageRequestManager._initialize('ScriptManager1', document.getElementById('form1')); Sys.WebForms.PageRequestManager.getInstance()._updateControls([], [], [], 90); //]]> </script>   This is the initialization script of the ScriptManager. So, if for some reason the Sys namespace is not available when the code executes you get the Sys is undefined error. Here are the most common reasons and solutions for that problem:   1. The error occurs when you have added a control from RadControls for ASP.NET AJAX, but your application is not configured to use ASP.NET AJAX. For example, in VS 2005 you created a new Blank Site instead of a new Ajax-Enabled Web Site and the Sys is undefined message pops up. To fix it you need to follow the steps described at Configuring ASP.NET Ajax article (check the topic called Adding ASP.NET AJAX Configuration Elements to an Existing Web Site) or simply create the Ajax-Enabled Web Site. You can also check my other blog post on the matter: Visual Studio 2008: Where is the new ASP.NET Ajax-Enabled Web Site template?   2. Authentication - as the website denies access to all pages to unauthorized users, access to the Telerik.Web.UI.WebResource.axd handler is unauthorized (this is the default handler of RadScriptManager). This causes the handler to serve the content of the login page instead of the combined scripts, hence the error. To solve it - add a <location> section to the application configuration file to allow access to Telerik.Web.UI.WebResource.axd to all users, like: <configuration> ... <location path="Telerik.Web.UI.WebResource.axd"> <system.web> <authorization> <allow users="*"/> </authorization> </system.web> </location> ... </configuration>   Note that the access to the standard ScriptResource.axd and WebResource.axd is automatically allowed for all users (authenticated and unauthenticated), so if you use the ScriptManager instead of RadScriptManager - you will not face this problem. The authentication problem does not manifest when you disable script combining or use the CDN. Adding the above configuration section will make it work with RadScriptManagers combined script.   3. The IE6 browser fails to load the compressed script. The problem does not appear in any other browser. There is a well known bug in the older versions of IE6 which lose the first 2,048 bytes of data that are sent back from a Web server that uses HTTP compression. Latest versions of RadScriptManager does not compress the output at all if the client is IE6, but in the previous versions you need to manually disable the output compression to prevent the error. So, if you get the Sys is undefined error in IE6 - update to the latest version of RadControls or simply disable the output compression.   4. Requests to the *.axd files returns Error Code 404 - Not Found. This could  be fixed easily: Check in the IIS management console that the .axd extension (the default HTTP handler extension) is allowed:     Also check if the Verify if file exists checkbox is unchecked (click on the Edit button appearing in the previous screenshot to check). More information can be found in our troubleshooting article and from the ASP.NET QA team blog post   5. The virtual directory in IIS is not marked as Web Application. Converting it to Web Application should fix the problem.   6. Check for the <xhtmlConformance mode="Legacy"/> option in your web.config and remove it. It would be rather rare to become a victim of this exact case, but still have it in mind. Scott Guthrie describes it in more details   In the above points I mentioned several times the terms web resources, javascript output, compressed script. If you want to find out more about these please see the Web Resources Demystified series of my friend and colleague Atanas Korchev   I hope that one of the above solutions will help you get rid of the Sys is undefined error.   Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• My Feelings About Microsoft Surface

  - by Valter Minute

  Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

  Read the article

• Taking the Plunge - or Dipping Your Toe - into the Fluffy IAM Cloud by Paul Dhanjal (Simeio Solutions)

  - by Greg Jensen

  In our last three posts, we’ve examined the revolution that’s occurring today in identity and access management (IAM). We looked at the business drivers behind the growth of cloud-based IAM, the shortcomings of the old, last-century IAM models, and the new opportunities that federation, identity hubs and other new cloud capabilities can provide by changing the way you interact with everyone who does business with you. In this, our final post in the series, we’ll cover the key things you, the enterprise architect, should keep in mind when considering moving IAM to the cloud. Invariably, what starts the consideration process is a burning business need: a compliance requirement, security vulnerability or belt-tightening edict. Many on the business side view IAM as the “silver bullet” – and for good reason. You can almost always devise a solution using some aspect of IAM. The most critical question to ask first when using IAM to address the business need is, simply: is my solution complete? Typically, “business” is not focused on the big picture. Understandably, they’re focused instead on the need at hand: Can we be HIPAA compliant in 6 months? Can we tighten our new hire, employee transfer and termination processes? What can we do to prevent another password breach? Can we reduce our service center costs by the end of next quarter? The business may not be focused on the complete set of services offered by IAM but rather a single aspect or two. But it is the job – indeed the duty – of the enterprise architect to ensure that all aspects are being met. It’s like remodeling a house but failing to consider the impact on the foundation, the furnace or the zoning or setback requirements. While the homeowners may not be thinking of such things, the architect, of course, must. At Simeio Solutions, the way we ensure that all aspects are being taken into account – to expose any gaps or weaknesses – is to assess our client’s IAM capabilities against a five-step maturity model ranging from “ad hoc” to “optimized.” The model we use is similar to Capability Maturity Model Integration (CMMI) developed by the Software Engineering Institute (SEI) at Carnegie Mellon University. It’s based upon some simple criteria, which can provide a visual representation of how well our clients fair when evaluated against four core categories: ·         Program Governance ·         Access Management (e.g., Single Sign-On) ·         Identity and Access Governance (e.g., Identity Intelligence) ·         Enterprise Security (e.g., DLP and SIEM) Often our clients believe they have a solution with all the bases covered, but the model exposes the gaps or weaknesses. The gaps are ideal opportunities for the cloud to enter into the conversation. The complete process is straightforward: 1.    Look at the big picture, not just the immediate need – what is our roadmap and how does this solution fit? 2.    Determine where you stand with respect to the four core areas – what are the gaps? 3.    Decide how to cover the gaps – what role can the cloud play? Returning to our home remodeling analogy, at some point, if gaps or weaknesses are discovered when evaluating the complete impact of the proposed remodel – if the existing foundation wouldn’t support the new addition, for example – the owners need to decide if it’s time to move to a new house instead of trying to remodel the old one. However, with IAM it’s not an either-or proposition – i.e., either move to the cloud or fix the existing infrastructure. It’s possible to use new cloud technologies just to cover the gaps. Many of our clients start their migration to the cloud this way, dipping in their toe instead of taking the plunge all at once. Because our cloud services offering is based on the Oracle Identity and Access Management Suite, we can offer a tremendous amount of flexibility in this regard. The Oracle platform is not a collection of point solutions, but rather a complete, integrated, best-of-breed suite. Yet it’s not an all-or-nothing proposition. You can choose just the features and capabilities you need using a pay-as-you-go model, incrementally turning on and off services as needed. Better still, all the other capabilities are there, at the ready, whenever you need them. Spooling up these cloud-only services takes just a fraction of the time it would take a typical organization to deploy internally. SLAs in the cloud may be higher than on premise, too. And by using a suite of software that’s complete and integrated, you can dramatically lower cost and complexity. If your in-house solution cannot be migrated to the cloud, you might consider using hardware appliances such as Simeio’s Cloud Interceptor to extend your enterprise out into the network. You might also consider using Expert Managed Services. Cost is usually the key factor – not just development costs but also operational sustainment costs. Talent or resourcing issues often come into play when thinking about sustaining a program. Expert Managed Services such as those we offer at Simeio can address those concerns head on. In a cloud offering, identity and access services lend to the new paradigms described in my previous posts. Most importantly, it allows us all to focus on what we're meant to do – provide value, lower costs and increase security to our respective organizations. It’s that magic “silver bullet” that business knew you had all along. If you’d like to talk more, you can find us at simeiosolutions.com.

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• ADF Business Components

  - by Arda Eralp

  ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions   ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive.   ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database   Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components   Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management   Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service   Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application   ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database   View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application  

  Read the article

• Synergy - easy share of keyboard and mouse between multiple computers

  Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

  Read the article

• Why do we use the Pythagorean theorem in game physics?

  - by Starkers

  I've recently learned that we use Pythagorean theorem a lot in our physics calculations and I'm afraid I don't really get the point. Here's an example from a book to make sure an object doesn't travel faster than a MAXIMUM_VELOCITY constant in the horizontal plane: MAXIMUM_VELOCITY = <any number>; SQUARED_MAXIMUM_VELOCITY = MAXIMUM_VELOCITY * MAXIMUM_VELOCITY; function animate(){ var squared_horizontal_velocity = (x_velocity * x_velocity) + (z_velocity * z_velocity); if( squared_horizontal_velocity <= SQUARED_MAXIMUM_VELOCITY ){ scalar = squared_horizontal_velocity / SQUARED_MAXIMUM_VELOCITY; x_velocity = x_velocity / scalar; z_velocity = x_velocity / scalar; } } Let's try this with some numbers: An object is attempting to move 5 units in x and 5 units in z. It should only be able to move 5 units horizontally in total! MAXIMUM_VELOCITY = 5; SQUARED_MAXIMUM_VELOCITY = 5 * 5; SQUARED_MAXIMUM_VELOCITY = 25; function animate(){ var x_velocity = 5; var z_velocity = 5; var squared_horizontal_velocity = (x_velocity * x_velocity) + (z_velocity * z_velocity); var squared_horizontal_velocity = 5 * 5 + 5 * 5; var squared_horizontal_velocity = 25 + 25; var squared_horizontal_velocity = 50; // if( squared_horizontal_velocity <= SQUARED_MAXIMUM_VELOCITY ){ if( 50 <= 25 ){ scalar = squared_horizontal_velocity / SQUARED_MAXIMUM_VELOCITY; scalar = 50 / 25; scalar = 2.0; x_velocity = x_velocity / scalar; x_velocity = 5 / 2.0; x_velocity = 2.5; z_velocity = z_velocity / scalar; z_velocity = 5 / 2.0; z_velocity = 2.5; // new_horizontal_velocity = x_velocity + z_velocity // new_horizontal_velocity = 2.5 + 2.5 // new_horizontal_velocity = 5 } } Now this works well, but we can do the same thing without Pythagoras: MAXIMUM_VELOCITY = 5; function animate(){ var x_velocity = 5; var z_velocity = 5; var horizontal_velocity = x_velocity + z_velocity; var horizontal_velocity = 5 + 5; var horizontal_velocity = 10; // if( horizontal_velocity >= MAXIMUM_VELOCITY ){ if( 10 >= 5 ){ scalar = horizontal_velocity / MAXIMUM_VELOCITY; scalar = 10 / 5; scalar = 2.0; x_velocity = x_velocity / scalar; x_velocity = 5 / 2.0; x_velocity = 2.5; z_velocity = z_velocity / scalar; z_velocity = 5 / 2.0; z_velocity = 2.5; // new_horizontal_velocity = x_velocity + z_velocity // new_horizontal_velocity = 2.5 + 2.5 // new_horizontal_velocity = 5 } } Benefits of doing it without Pythagoras: Less lines Within those lines, it's easier to read what's going on ...and it takes less time to compute, as there are less multiplications Seems to me like computers and humans get a better deal without Pythagorean theorem! However, I'm sure I'm wrong as I've seen Pythagoras' theorem in a number of reputable places, so I'd like someone to explain me the benefit of using Pythagorean theorem to a maths newbie. Does this have anything to do with unit vectors? To me a unit vector is when we normalize a vector and turn it into a fraction. We do this by dividing the vector by a larger constant. I'm not sure what constant it is. The total size of the graph? Anyway, because it's a fraction, I take it, a unit vector is basically a graph that can fit inside a 3D grid with the x-axis running from -1 to 1, z-axis running from -1 to 1, and the y-axis running from -1 to 1. That's literally everything I know about unit vectors... not much :P And I fail to see their usefulness. Also, we're not really creating a unit vector in the above examples. Should I be determining the scalar like this: // a mathematical work-around of my own invention. There may be a cleverer way to do this! I've also made up my own terms such as 'divisive_scalar' so don't bother googling var divisive_scalar = (squared_horizontal_velocity / SQUARED_MAXIMUM_VELOCITY); var divisive_scalar = ( 50 / 25 ); var divisive_scalar = 2; var multiplicative_scalar = (divisive_scalar / (2*divisive_scalar)); var multiplicative_scalar = (2 / (2*2)); var multiplicative_scalar = (2 / 4); var multiplicative_scalar = 0.5; x_velocity = x_velocity * multiplicative_scalar x_velocity = 5 * 0.5 x_velocity = 2.5 Again, I can't see why this is better, but it's more "unit-vector-y" because the multiplicative_scalar is a unit_vector? As you can see, I use words such as "unit-vector-y" so I'm really not a maths whiz! Also aware that unit vectors might have nothing to do with Pythagorean theorem so ignore all of this if I'm barking up the wrong tree. I'm a very visual person (3D modeller and concept artist by trade!) and I find diagrams and graphs really, really helpful so as many as humanely possible please!

  Read the article

• Are IE9 really good ?

  - by anirudha

  IE9 started a campaign for kill IE6 from the core because they know that IE6 is a big trouble or  problem for them for promote 9 version of IE. so they started a campaign for killing IE6. next time they kill IE 7 , 8,9 whenever they found this old version have a big problem for them to promote next version of IE.   Why they not make a update system who automatically update the browser and tell user to restart and update goes installed in the user system. well IE9 should learn from all other that they have very well design auto-update system who never give user in trouble that your browser goes old. Chrome and Firefox both update themselves and say user restart to enjoy another good version. in IE6 a big problem is that updates. no one sure that they installed new version of IE6 without any hassles and update goes install without any problem because they really know or care about “you need this to install this and this for this” so they thing “why I update IE whenever I am unsure that my browser goes update and I have no problem again” so they do nothing because their work done with no problem because common person used high profile application who work even in IE6. so they do nothing.    IE6 countdown website have designed a banner for warn or force user to upgrade to next version of IE. well there is no good reason for put the banner on website some of reason are:-   Windows 7 comes with pre-installed IE8 and Vista comes with upgrade version them IE6 so that is sure that you force a user who have Windows XP [luna] and if they want to upgrade IE then they can get IE8 not version 9 because IE9 is design for Windows 7 or Vista Service pack 2. so What is the use of update when user still have a outdate version too because IE8 is old version and not have any capability of HTML5 so forcing user by using the banner have no sense. I am not know why they all listed on website put the banner on their own website. it’s good that you offer user what they want instead of giving them a outdate version of IE again. My means to give a user list of browser they can try to enhance their browser experience instead of only IE.   IE9 build upon WPF and they spent more time on using WPF in IE instead of making user experience browser.  many thing is designed wrongly in IE first thing is tabs. the tabs in chrome are bigger and easily to move and same in Firefox even not have smooth tabbing. IE have same tabbing as chrome have but leak a point that it’s too small. if you really  want to move then sometime they create a problem that they going elsewhere from the current instance of IE.   Chrome have a big buttons, tabs and menu to enhance browser experience and Firefox have a good feature that you can make them bigger or small. you can put the icon for add-ons on the toolbar for easily use but IE have no relation with customization so we never can thinking about that.   When chrome provide lot’s of extensions and a  webstore for browser application and same feature in Firefox can be seen then there is no plugin in IE. really you can see their IE addons Website where no plugin listed for web development. even in the category or tag. as a response from many blog there is new for developer that new version of IE9 developer tool. well IE9 have three new tabs a blogger tell on their blog. when I trying them I found many thing but I still unable to edit the Css from the HTML tab and no plugin I found I can get to enhance IE9 web development. something more other provide never IE9 give me like personas , customization , browser extension or any other they used to tell a small thing customization  .   IE9 still have some problem with JavaScript that when I use Firefox and chrome and logout in both then my cookie is deleted but in IE it’s not done. it’s show me that IE9 still have different from other not for good thing even some bad thing too. When I trying to read a article that is written in Hindi using Unicode font I found that they show many thing misspelled. there is three Sha in Hindi but they all goes wrong in IE. the misprint thing is not that the writing  for the articles goes wrong. it’s problem or browser to rendering a font. the Firefox and chrome not give me this problem even opera render the font in italic style by decrease the font-size but all those work perfect.   in Pwn2Own the apple’s safari  and IE9 both are hacked. this is a awesome news for whose who thing that  open-source is lose in  Security and close-source is highly-secured software. well this is not a good parameter for talking about software. it’s should depend how much application tested and used. because more testing and more use of application make them better.   I  appreciate IE to making their new version 9 and good luck for them. there is a another matter that I personally found nothing on them.

  Read the article

• Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

  - by jgottula

  I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

  Read the article

• UK OUG Conference Highlights and Insights

  - by Richard Bingham

  As per my preemptive post, this was the first time the annual conference organized by the UK Oracle User Group (UKOUG) was split into two events, one for Oracle Applications and another in December for Oracle Technology. Apps13, as it was branded, was hailed as a success, with over 1000 registered attendees and three days of sessions, exhibition, round-tables and many other types of content. As this poster on their stand illustrates, the UKOUG is a strong community with popular participants from both big and small Oracle partners and customers. The venue was a more intimate setting than previous years also, allowing everyone to casually bump into those they hoped to. It gave a real feeling of an Apps Community. The main themes over the days where CRM and Customer Experience, HCM, and FIN/SCM. This allowed people to attend just one focused day if they wanted. In addition the Apps Transformation stream ran across all three days, offering insights, advice, and details on the newer product solutions like Fusion Applications.  Here are some of the key take-aways I got from the conference, specific to my role in Fusion Applications Developer Relations: User Experience continues to be a significant reason for adopting some of the newer application products available, with immediately obvious gains in user productivity and satisfaction reported by customers. Also this doesn't stop with the baked-in UX either, with their Design Patterns proving popular and indeed currently being extended to including things like extending on ADF mobile and customizing the Simplified UI. More on this to come from us soon. The executive sessions emphasized the "it's a journey" phrase, illustrating that modern business applications are powered by technologies such as Cloud, Mobile, Social and Big Data and these can be harnessed to help propel your organization forward. Indeed the emphasis is away from the traditional vendor prescribed linear applications road map, and towards plotting a course based on business priorities supported by a broad range of integrated solutions. To help with this several conference sessions demoed the new "Applications Navigator" tool, developed in partnership with OUG members, which offers a visual framework to help organizations plan their Oracle Applications investments around business and technology imperatives. Initial reaction was positive, especially as customers do not need to decipher Oracle's huge product catalog and embeds the best blend of proven and integrated applications solutions. We'll share more on this when it is generally available. Several sessions focused around explanations and interpretation of Oracle OpenWorld 2013, helping highlight the key Oracle Applications messages and directions. With a relative small percentage of conference attendees also at OpenWorld (from a show of hands) this was a popular way to distill the information available down into specific items of interest for the community. Please note the original OpenWorld 2013 content is still available for download but will not remain available forever (via the Oracle website OpenWorld Content Catalog > pick a session > see the PDF download). With the release of E-Business Suite 12.2 the move to develop and deploy on the Fusion Middleware stack becomes a reality for many Oracle Applications customers. This coupled with recent E-Business Suite features such as the Integrated SOA Gateway and the E-Business Suite SDK for Java, illustrates how the gap between the technologies and techniques involved in extending E-Business Suite and Fusion Applications is quickly narrowing. We'll see this merging continue to evolve going forwards. Getting started with Oracle Cloud Applications is actually easier than many customers expected, with a broad selection of both large and medium sized organizations explaining how they added new features to their existing Oracle Applications portfolios. New functionality available from Fusion HCM and CX are popular extensions that do not have to disrupt those core business services. Coexistence is the buzzword here, and the available integration is also simpler than many expected, commonly involving an initial setup data load, then regularly incremental synchronizations, often without a need for real-time constant communication between systems. With much of this pre-built already the implementation process is also quite rapid. With most people dressed in suits, we wanted to get the conversations going without the traditional english reserve, so we decided to make ourselves a bit more obvious, as the photo below shows. This seemed to be quite successful and helped those interested identify and approach us. Keep a look out for similar again. In fact if you're in the UK there is an "Apps Transformation Day" planned by the UKOUG for the 19th March 2014, with more details to follow. Again something we'll be sure to participate in. I am hoping to attend the next half of the UKOUG annual conference, Tech13, that focuses more on Oracle technology and where there is more likely to be larger attendance of those interested in the lower-level aspects of applications customization and development. If you're going, let me know and maybe we can meet up.

  Read the article

• BizTalk: namespaces

  - by Leonid Ganeline

  BizTalk team did a good job hiding the .NET guts from developers. Developers are working with editors and hardly with .NET code. The Orchestration editor, the Mapper, the Schema editor, the Pipeline editor, all these editors hide what is going on with artifacts created and deployed. Working with the BizTalk artifacts year after year brings us some knowledge which could help to understand more about the .NET guts. I would like to highlight the .NET namespaces. What they are, how they influence our everyday tasks in the BizTalk application development. What is it? Most of the BizTalk artifacts are compiled into the NET classes. Not all of them… but I will show you later. Classes are placed inside the namespaces. I will not describe here why we need namespaces and what is it. I assume you all know about it more then me. Here I would like to emphasize that almost each BizTalk artifact is implemented as a .NET class within a .NET namespace. Where to see the namespaces in development? The namespaces are inconsistently spread across the artifact parameters. Let’s start with namespace placement in development. Then we go with namespaces in deployment and operations. I am using pictures from the BizTalk Server 2013 Beta and the Visual Studio 2012 but there was no changes regarding the namespaces starting from the BizTalk 2006. Default namespace When a new BizTalk project is created, the default namespace is set up the same as a name of a project. This namespace would be used for all new BizTalk artifacts added to this project. Orchestrations When we select a green or a red markers (the Begin and End orchestration shapes) we will see the orchestration Properties window. We also can click anywhere on the space between Port Surfaces to see this window.   Schemas The only way to see the NET namespace for map is selecting the schema file name into the Solution Explorer. Notes: We can also see the Type Name parameter. It is a name of the correspondent .NET class. We can also see the Fully Qualified Name parameter. We cannot see the schema namespace when selecting any node on the schema editor surface. Only selecting a schema file name gives us a namespace parameter. If we select a <Schema> node we can get the Target Namespace parameter of the schema. This is NOT the .NET namespace! It is an XML namespace. See this XML namespace inside the XML schema, it is shown as a special targetNamespace attribute Here this XML namespace appears inside the XML document itself. It is shown as a special xmlns attribute.   Maps It is similar to the schemas. The only way to see the NET namespace for map is selecting a map file name into the Solution Explorer. Pipelines It is similar to the schemas. The only way to see the NET namespace for pipeline is selecting a pipeline file name into the Solution Explorer. z Ports, Policies and Tracking Profiles The Send and Receive Ports, the Policies and the BAM Tracking Profiles do not create the .NET classes and they do not have the associated .NET namespaces. How to copy artifacts? Since the new versions of the BizTalk Server are going to production I am spending more and more time redesigning and refactoring the BizTalk applications. It is good to know how the refactoring process copes with the .NET namespaces. Let see what is going on with the namespaces when we copy the artifacts from one project to another. Here is an example: I am going to group the artifacts under the project folders. So, I have created a Group folder, have run the Add / Existing Item.. command and have chosen all artifacts in the project root. The artifact copies were created in the Group folder: What was happened with the namespaces of the artifacts? As you can see, the folder name, the “Group”, was added to the namespace. It is great! When I added a folder, I have added one more level in the name hierarchy and the namespace change just reflexes this hierarchy change.  The same namespace adjustment happens when we copy the BizTalk artifacts between the projects. But there is an issue with the namespace of an orchestration. It was not changed. The namespaces of the schemas, maps, pipelines are changed but not the orchestration namespace. I have to change the orchestration namespace manually. Now another example: I am creating a new Project folder and moving the artifacts there from the project root by drag and drop. We will mention the artifact namespaces are not changed. Another example: I am copying the artifacts from the project root by (drag and drop) + Ctrl. We will mention the artifact namespaces are changed. It works exactly as it was with the Add / Existing Item.. command. Conclusion: The namespace parameter is put inconsistently in different places for different artifacts Moving artifacts changes the namespaces of the schemas, maps, pipelines but not the orchestrations.

  Read the article

• Some Early Considerations

  - by Chris Massey

  Following on from my previous post, I want to say "thank you" to everyone who has got in touch and got involved – you are pioneers! An update on where we are right now: paper prototypes v1 To be more specific, we’ve picked two of the ideas that seem to have more pros than cons, turned them into Balsamiq mockups, and are getting them fleshed out with realistic content. We’ll initially make these available to the aforementioned pioneers (thank you again), roll in the feedback, and then open up to get more data on what works and what doesn’t. If you’ve got any questions about this (or what we’re working on right now), feel free to ask me in the comments below. I’ve had a few people express an interest in the process we’re going through, and I’m more than happy to share details more frequently as we go along – not least because you, dear reader, will help us stay on target and create something Good. To start with, here’s a quick flashback to bring you all up to speed. A Brief Retrospective As you may already know, we’re creating a new publishing asset specifically focused on providing great content for web developers. We don’t yet know exactly what this thing will look like, or exactly how it will work, but we know we want to create something that is useful different. For my part, I’m seriously excited at the prospect of building a genuinely digital publishing system (as opposed to what most publishing is these days, which is print-style publishing which just happens to be on the web). The main challenge at this point is working out our build-measure-assess loop to speed up our experimental turn-around, and that’ll get better as we run more trials. Of course, there are a few things we’ve been pondering at this early conceptual stage: Do we publishing about heterogeneous technology stacks from day 1, or do we start with ASP.NET (which we’re familiar with) & branch out later? There are challenges with either approach. What publishing "modes" are already being well-handled? For example, the likes of Pluralsight, TekPub, and Treehouse have pretty much nailed video training (debate about price, if you like), and unless we think we can do it faster / better / cheaper (unlikely, for the record), we should leave them to it. Where should we base whatever we create? Should we create a completely new asset under a new name, graft something onto Simple-Talk (like the labs), or just build something directly into Simple-Talk? It sounds trivial, but it does have at least some impact on infrastructure and what how we manage the different types of content we (will) have. Are there any obvious problems or niches that we think could address really well, or should we just throw ideas out and see what readers respond to? What kind of users do we want to provide for? This actually deserves a little bit of unpacking… Why are you here? We currently divide readers into (broadly) the categories: Category 1: I know nothing about X, and I’d like to learn about it. Category 2: I know something about X, but I’d like to learn how to do something specific with it. Category 3: Ah man, I have a problem with X, and I need to fix it now. Now that I think about it, I might also include a 4th class of reader: Category 4: I’m looking for something interesting to engage my brain. These are clearly task-based categorizations, and depending on which task you’re performing when you arrive here, you’re going to need different types of content, or will have specific discovery needs. One of the questions that’s at the back of my mind whenever I consider a new idea is “How many of the categories will this satisfy?” As an example, typical video training is very well suited to categories 1, 2, and 4. StackOverflow is very well suited to category 3, and serves as a sign-posting system to the rest. Clearly it’s not necessary to satisfy every category need to be useful and popular, but being aware of what behavior readers might be exhibiting when they arrive will help us tune our ideas appropriately. < / Flashback > We don’t have clean answers to most of these considerations – they’re things we’re aware of, and each idea we look at is going to be best suited to a different mix of the options I’ve described. Our first experimental loop will be coming full circle in the next few days, so we should start to see how the different possibilities vary between ideas. Free to chime in with questions and suggestions about anything I’ve just brain-dumped, or at any stage as we go along. If you see anything that intrigued or enrages you, or just have an idea you’d like to share, I’d love to hear from you.

  Read the article

• Wordpress Theme

  - by HotPizzaBox

  I'm trying to create a basic wordpress theme. As far as I know the basic files I need are the style.css, header.php, index.php, footer.php, functions.php. Then it should show a blank site with some meta tags in the header. These are my files: functions.php <?php // load the language files load_theme_textdomain('brianroyfoundation', get_template_directory() . '/languages'); // add menu support add_theme_support('menus'); register_nav_menus(array('primary_navigation' => __('Primary Navigation', 'BrianRoyFoundation'))); // create widget areas: sidebar $sidebars = array('Sidebar'); foreach ($sidebars as $sidebar) { register_sidebar(array('name'=> $sidebar, 'before_widget' => '<div class="widget %2$s">', 'after_widget' => '</div>', 'before_title' => '<h6><strong>', 'after_title' => '</strong></h6>' )); } // Add Foundation 'active' class for the current menu item function active_nav_class($classes, $item) { if($item->current == 1) { $classes[] = 'active'; } return $classes; } add_filter( 'nav_menu_css_class', 'active_nav_class', 10, 2); ?> header.php <!DOCTYPE html> <html <?php language_attributes(); ?>> <head> <meta charset="<?php bloginfo('charset'); ?>" /> <meta name="description" content="<?php bloginfo('description'); ?>"> <meta name="google-site-verification" content=""> <meta name="author" content="Your Name Here"> <!-- No indexing if Search page is displayed --> <?php if(is_search()){ echo '<meta name="robots" content="noindex, nofollow" />' } ?> <title><?php wp_title('|', true, 'right'); bloginfo('name'); ?></title> <link rel="stylesheet" type="text/css" href="<?php bloginfo('stylesheet_url'); ?>" /> <?php wp_head(); ?> </head> <body> <div id="page"> <div id="page-header"> <div id="page-title"> <a href="<?php bloginfo('url'); ?>" title="<?php bloginfo('name'); ?>"><?php bloginfo('name'); ?></a> </div> <div id="page-navigation"> <?php wp_nav_menu( array( 'theme_location' => 'primary_navigation', 'container' =>false, 'menu_class' => '' ); ?> </div> </div> <div id="page-content"> index.php <?php get_header(); ?> <div class="page-blog"> <?php get_template_part('loop', 'index'); ?> </div> <div class="page-sidebar"> <?php get_sidebar(); ?> </div> <?php get_footer(); ?> footer.php </div> <div id="page-footer"> &copy; 2008 - <?php echo date('Y'); ?> All rights reserved. </div> </div> <?php wp_footer(); ?> </body> </html> I activated the theme in wordpress. But it just shows nothing. Not even if I view the page source. Can anyone help?

  Read the article

• Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

  - by arungupta

  This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

• Key Windows Phone Development Concepts

  - by Tim Murphy

  As I am doing more development in and out of the enterprise arena for Windows Phone I decide I would study for the 70-599 test.  I generally take certification tests as a way to force me to dig deeper into a technology.  Between the development and studying I decided it would be good to put a post together of key development features in Windows Phone 7 environment.  Contrary to popular belief the launch of Windows Phone 8 will not obsolete Windows Phone 7 development.  With the launch of 7.8 coming shortly and people who will remain on 7.X for the foreseeable future there are still consumers needing these apps so don’t throw out the baby with the bath water. PhoneApplicationService This is a class that every Windows Phone developer needs to become familiar with.  When it comes to application state this is your go to repository.  It also contains events that help with management of your application’s lifecycle.  You can access it like the following code sample. 1: PhoneApplicationService.Current.State["ValidUser"] = userResult; DeviceNetworkInformation This class allows you to determine the connectivity of the device and be notified when something changes with that connectivity.  If you are making web service calls you will want to check here before firing off. I have found that this class doesn’t actually work very well for determining if you have internet access.  You are better of using the following code where IsConnectedToInternet is an App level property. private void Application_Launching(object sender, LaunchingEventArgs e){ // Validate user access if (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None) { IsConnectedToInternet = true; } else { IsConnectedToInternet = false; } NetworkChange.NetworkAddressChanged += new NetworkAddressChangedEventHandler(NetworkChange_NetworkAddressChanged);}void NetworkChange_NetworkAddressChanged(object sender, EventArgs e){ IsConnectedToInternet = (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None);} Push Notification Push notification allows your application to receive notifications in a way that reduces the application’s power needs. This MSDN article is a good place to get the basics of push notification, but you can see the essential concept in the diagram below.  There are three types of push notification: toast, Tile and raw.  The first two work regardless of the state of the application where as raw messages are discarded if your application is not running.   Live Tiles Live tiles are one of the main differentiators of the Windows Phone platform.  They allow users to find information at a glance from their start screen without navigating into individual apps.  Knowing how to implement them can be a great boost to the attractiveness of your application. The simplest step-by-step explanation for creating live tiles is here. Local Database While your application really only has Isolated Storage as a data store there are some ways of giving you database functionality to develop against.  There are a number of open source ORM style solutions.  Probably the best and most native way I have found is to use LINQ to SQL.  It does take a significant amount of setup, but the ease of use once it is configured is worth the cost.  Rather than repeat the full concepts here I will point you to a post that I wrote previously. Tasks (Bing, Email) Leveraging built in features of the Windows Phone platform is an easy way to add functionality that would be expensive to develop on your own.  The classes that you need to make yourself familiar with are BingMapsDirectionsTask and EmailComposeTask.  This will allow your application to supply directions and give the user an email path to relay information to friends and associates. Event model Because of the ability for users to switch quickly to switch to other apps or the home screen is just one reason why knowing the Windows Phone event model is important.  You need to be able to save data so that if a user gets a phone call they can come back to exactly where they were in your application.  This means that you will need to handle such events as Launching, Activated, Deactivated and Closing at an application level.  You will probably also want to get familiar with the OnNavigatedTo and OnNavigatedFrom events at the page level.  These will give you an opportunity to save data as a user navigates through your app. Summary This is just a small portion of the concepts that you will use while building Windows Phone apps, but these are some of the most critical.  With the launch of Windows Phone 8 this list will probably expand.  Take the time to investigate these topics further and try them out in your apps. del.icio.us Tags: Windows Phone 7,Windows Phone,WP7,Software Development,70-599

  Read the article

• "LNK2001: unresolved external symbol" when trying to build my program

  - by random

  I get the following error(s) on my program that captures the mouse and then draws a line. Errors: 1>------ Build started: Project: Capture_Mouse_Line, Configuration: Debug Win32 ------ 1> main.cpp 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc2" (?yc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc2" (?xc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc1" (?yc1@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc1" (?xc1@Line@@2PAJA) 1>MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup 1>D:\Visual C++ Projects\Capture_Mouse_Line\Debug\Capture_Mouse_Line.exe : fatal error LNK1120: 5 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Here is my code: #include<allegro5\allegro.h> #include<allegro5\allegro_native_dialog.h> #include<allegro5\allegro_primitives.h> #include<Windows.h> #include<allegro5\allegro_windows.h> #ifndef WIDTH #define WIDTH 1440 #endif #ifndef HEIGHT #define HEIGHT 900 #endif class Line { public: static void ErasePreviousLine(); static void DrawLine(long* x, long* y,long* x2,long* y2); static bool Erasable(); static long* xc1; static long* yc1; static long* xc2; static long* yc2; }; void Line::ErasePreviousLine() { delete xc1; xc1 = NULL; delete yc1; yc1 = NULL; delete xc2; xc2 = NULL; delete yc2; yc2 = NULL; } bool Line::Erasable() { if(xc1 && yc1 && xc2 && yc2 == NULL) { return false; } else { return true; } } void Line::DrawLine(long* x,long* y,long* x2,long* y2) { if(!al_init_primitives_addon()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); } xc1 = x; yc1 = y; xc2 = x2; yc2 = y2; al_draw_line((float)*xc1, (float)*yc1, (float)*xc2, (float)*yc2,al_map_rgb(255,0,255), 1); delete x; delete y; delete x2; delete y2; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam); int WINAPI WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { MSG msg; ALLEGRO_DISPLAY* display = NULL; if(!al_init()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); return -1; } display = al_create_display(WIDTH,HEIGHT); if(!display) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize display", NULL,NULL); return -1; } HWND hwnd = al_get_win_window_handle(display); if(hwnd == NULL) { MessageBox(NULL, "Window Creation Failed!", "Error!", MB_ICONEXCLAMATION | MB_OK); return 0; } ShowWindow(hwnd, nCmdShow); UpdateWindow(hwnd); while(GetMessage(&msg, NULL, 0, 0) > 0) { TranslateMessage(&msg); DispatchMessage(&msg); } return msg.wParam; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static bool bIsCaptured; static POINTS ptsBegin; static POINTS ptsEnd; switch(msg) { case WM_LBUTTONDOWN: SetCapture(hwnd); bIsCaptured = true; ptsBegin = MAKEPOINTS(lParam); return 0; case WM_MOUSEMOVE: if(wParam & MK_LBUTTON) { if(!Line::Erasable()) { return 0; } Line::ErasePreviousLine(); ptsEnd = MAKEPOINTS(lParam); Line::DrawLine(new long(ptsBegin.x),new long(ptsBegin.y),new long(ptsEnd.x),new long(ptsEnd.y)); } break; case WM_LBUTTONUP: bIsCaptured = false; ReleaseCapture(); break; case WM_ACTIVATEAPP: { if(wParam == TRUE) { if(bIsCaptured){ SetCapture(hwnd);} } } break; } return 0; }

  Read the article

• Building a Repository Pattern against an EF 5 EDMX Model - Part 1

  - by Juan

  I am part of a year long plus project that is re-writing an existing application for a client.  We have decided to develop the project using Visual Studio 2012 and .NET 4.5.  The project will be using a number of technologies and patterns to include Entity Framework 5, WCF Services, and WPF for the client UI.This is my attempt at documenting some of the successes and failures that I will be coming across in the development of the application.In building the data access layer we have to access a database that has already been designed by a dedicated dba. The dba insists on using Stored Procedures which has made the use of EF a little more difficult.  He will not allow direct table access but we did manage to get him to allow us to use Views.  Since EF 5 does not have good support to do Code First with Stored Procedures, my option was to create a model (EDMX) against the existing database views.   I then had to go select each entity and map the Insert/Update/Delete functions to their respective stored procedure. The next step after I had completed mapping the stored procedures to the entities in the EDMX model was to figure out how to build a generic repository that would work well with Entity Framework 5.  After reading the blog posts below, I adopted much of their code with some changes to allow for the use of Ninject for dependency injection.http://www.tcscblog.com/2012/06/22/entity-framework-generic-repository/ http://www.tugberkugurlu.com/archive/generic-repository-pattern-entity-framework-asp-net-mvc-and-unit-testing-triangle IRepository.cs public interface IRepository : IDisposable where T : class { void Add(T entity); void Update(T entity, int id); T GetById(object key); IQueryable Query(Expression> predicate); IQueryable GetAll(); int SaveChanges(); int SaveChanges(bool validateEntities); } GenericRepository.cs public abstract class GenericRepository : IRepository where T : class { public abstract void Add(T entity); public abstract void Update(T entity, int id); public abstract T GetById(object key); public abstract IQueryable Query(Expression> predicate); public abstract IQueryable GetAll(); public int SaveChanges() { return SaveChanges(true); } public abstract int SaveChanges(bool validateEntities); public abstract void Dispose(); } One of the issues I ran into was trying to do an update. I kept receiving errors so I posted a question on Stack Overflow http://stackoverflow.com/questions/12585664/an-object-with-the-same-key-already-exists-in-the-objectstatemanager-the-object and came up with the following hack. If someone has a better way, please let me know. DbContextRepository.cs public class DbContextRepository : GenericRepository where T : class { protected DbContext Context; protected DbSet DbSet; public DbContextRepository(DbContext context) { if (context == null) throw new ArgumentException("context"); Context = context; DbSet = Context.Set(); } public override void Add(T entity) { if (entity == null) throw new ArgumentException("Cannot add a null entity."); DbSet.Add(entity); } public override void Update(T entity, int id) { if (entity == null) throw new ArgumentException("Cannot update a null entity."); var entry = Context.Entry(entity); if (entry.State == EntityState.Detached) { var attachedEntity = DbSet.Find(id); // Need to have access to key if (attachedEntity != null) { var attachedEntry = Context.Entry(attachedEntity); attachedEntry.CurrentValues.SetValues(entity); } else { entry.State = EntityState.Modified; // This should attach entity } } } public override T GetById(object key) { return DbSet.Find(key); } public override IQueryable Query(Expression> predicate) { return DbSet.Where(predicate); } public override IQueryable GetAll() { return Context.Set(); } public override int SaveChanges(bool validateEntities) { Context.Configuration.ValidateOnSaveEnabled = validateEntities; return Context.SaveChanges(); } #region IDisposable implementation public override void Dispose() { if (Context != null) { Context.Dispose(); GC.SuppressFinalize(this); } } #endregion IDisposable implementation } At this point I am able to start creating individual repositories that are needed and add a Unit of Work.  Stay tuned for the next installment in my path to creating a Repository Pattern against EF5.

  Read the article

• How to create Captcha in ASP.NET

  - by Samir R. Bhogayta

  1. Create one page with name "Captcha.aspx" 2. No any control require in this page 3. Go to Captcha.aspx.vb write the below code Protected Sub Page_Load(sender As Object, e As System.EventArgs) Handles Me.Load         'create object of Bitmap Class and set its width and height.         Dim objBMP As Bitmap = New Bitmap(180, 51)         'Create Graphics object and assign bitmap object to graphics' object.         Dim objGraphics As Graphics = Graphics.FromImage(objBMP)         objGraphics.Clear(Color.White)         objGraphics.TextRenderingHint = TextRenderingHint.AntiAlias         Dim objFont As Font = New Font("arial", 30, FontStyle.Bold)         'genetating random 6 digit random number         Dim randomStr As String = GeneratePassword()         'set this random number in session         Session.Add("randomStr", randomStr)         Session.Add("randomStrCountry", randomStr)         objGraphics.DrawString(randomStr, objFont, Brushes.Black, 2, 2)         Response.ContentType = "image/GIF"         objBMP.Save(Response.OutputStream, ImageFormat.Gif)         objFont.Dispose()         objGraphics.Dispose()         objBMP.Dispose()     End Sub     Public Function GeneratePassword() As String         ' Below code describes how to create random numbers.some of the digits and letters         ' are ommited because they look same like "i","o","1","0","I","O".         Dim allowedChars As String = "a,b,c,d,e,f,g,h,j,k,m,n,p,q,r,s,t,u,v,w,x,y,z,"         allowedChars += "A,B,C,D,E,F,G,H,J,K,L,M,N,P,Q,R,S,T,U,V,W,X,Y,Z,"         allowedChars += "2,3,4,5,6,7,8,9"         Dim sep() As Char = {","c}         Dim arr() As String = allowedChars.Split(sep)         Dim passwordString As String = ""         Dim temp As String         Dim rand As Random = New Random()         Dim i As Integer         For i = 0 To 5 - 1 Step i + 1             temp = arr(rand.Next(0, arr.Length))             passwordString += temp         Next         Return passwordString     End Function 4. Use this page in you aspx page like this img alt="" border="0" src="Captcha.aspx" style="cursor: move; height: 60px; width: 200px;" //                                   your textbox to insert code by user.

  Read the article

• Windows 8 for productivity?

  - by Charles Young

  At long last I’ve started using Windows 8.  I boot from a VHD on which I have installed Office, Visio, Visual Studio, SQL Server, etc.  For a week, now, I’ve been happily writing code and documents and using Visio and PowerPoint.  I am, very much, a ‘productivity’ user rather than a content consumer.   I spend my days flitting between countless windows and browser tabs displayed across dual monitors.  I need to access a lot of different functionality and information in as fluid a fashion as possible. With that in mind, and like so many others, I was worried about Windows 8.  The Metro interface is primarily about content consumption on touch-enabled screens, and not really geared for people like me sitting in front of an 8-core non-touch laptop and an additional Samsung monitor.  I still use a mouse, not my finger.  And I create more than I consume. Clearly, Windows 8 won’t be viable for people like me unless Metro keeps out of my hair when using productivity and development tools.  With this in mind, I had long expected Microsoft to provide some mechanism for switching Metro off.  There was a registry hack in last year’s Developer Preview, but this capability has been removed.   That’s brave.  So, how have things worked out so far? Well, I am really quite surprised.  When I played with the Developer Preview last year, it was clear that Metro was unfinished and didn’t play well enough with the desktop.  Obviously I expected things to improve, but the context switching from desktop to full-screen seemed a heavy burden to place on users.  That sense of abrupt change hasn’t entirely gone away (how could it), but after a few days, I can’t say that I find it burdensome or irritating.   I’ve got used very quickly to ‘gesturing’ with my mouse at the bottom or top right corners of the screen to move between applications, using the Windows key to toggle the Start screen and generally finding my way around.   I am surprised at how effective the Start screen is, given the rather basic grouping features it provides.  Of course, I had to take control of it and sort things the way I want.  If anything, though, the Start screen provides a better navigation and application launcher tool than the old Start menu. What I didn’t expect was the way that Metro enhances the productivity story.  As I write this, I’ve got my desktop open with a maximised Word window.  However, the desktop extends only across about 85% of the width of my screen.  On the left hand side, I have a column that displays the new Metro email client.  This is currently showing me a list of emails for my main work account.  I can flip easily between different accounts and read my email within that same column.  As I work on documents, I want to be able to monitor my inbox with a quick glance. The desktop, of course, has its own snap feature.  I could run the desktop full screen and bring up Outlook and Word side by side.  However, this doesn’t begin to approach the convenience of snapping the Metro email client.  Consider that when I snap a window on the desktop, it initially takes up 50% of the screen.  Outlook doesn’t really know anything about snap, and doesn’t adjust to make effective use of the limited screen estate.  Even at 50% screen width, it is difficult to use, so forget about trying to use it in a Metro fashion. In any case, I am left with the prospect of having to manually adjust everything to view my email effectively alongside Word.  Worse, there is nothing stopping another window from overlapping and obscuring my email.  It becomes a struggle to keep sight of email as it arrives.  Of course, there is always ‘toast’ to notify me when things arrive, but if Outlook is obscured, this just feels intrusive. The beauty of the Metro snap feature is that my email reader now exists outside of my desktop.   The Metro app has been crafted to work well in the fixed width column as well as in full-screen.  It cannot be obscured by overlapping windows.  I still get notifications if I wish.  More importantly, it is clear that careful attention has been given to how things work when moving between applications when ‘snapped’.  If I decide, say to flick over to the Metro newsreader to catch up with current affairs, my desktop, rather than my email client, obligingly makes way for the reader.  With a simple gesture and click, or alternatively by pressing Windows-Tab, my desktop reappears. Another pleasant surprise is the way Windows 8 handles dual monitors.  It’s not just the fact that both screens now display the desktop task bar.  It’s that I can so easily move between Metro and the desktop on either screen.  I can only have Metro on one screen at a time which makes entire sense given the ‘full-screen’ nature of Metro apps.  Using dual monitors feels smoother and easier than previous versions of Windows. Overall then, I’m enjoying the Windows 8 improvements.  Strangely, for all the hype (“Windows reimagined”, etc.), my perception as a ‘productivity’ user is more one of evolution than revolution.  It all feels very familiar, but just better.

  Read the article

• If I were in a Silverlight focus group, here is ten things I would say.

  - by mbcrump

  Silverlight is a great product right off the shelf. I use it, love it and spend a lot of time helping the community understand it. This however, doesn’t mean that I don’t think that it can get better. If I were invited to a Microsoft Focus Group about Silverlight here is 10 things I would say:  We need more navigation templates. I’ve found (4) templates that Microsoft has released (Cosmo, Windows 7, Accent and JetPack). This number needs to be around 16. In order to get more people developing for Silverlight, we need to give them a variety of templates to get them off the ground quickly. Silverlight needs to ship with the next version of Windows. At least version 4 needs to be pre-installed on Windows going forward. It’s small, in its own sandbox and I cannot find a reason for it not to be included. Silverlight needs to run on more platforms.  iOS and Android are the key here. I think Microsoft should shoot for Android first since I believe Android will take the lead in the mobile market (at least for the short-term). It would also be great to see Microsoft use Silverlight as the focus on their new tablets / “AppleTV”. I would even invest in getting it working with Kinect. When creating a new project in Silverlight, we should have the option to create a Unit Test. Most Silverlight developers are not unit testing. If this is surprising to you then you need to get out and talk to more developers. I partially blame this on Microsoft. When you create a new ASP.NET MVC application, you simply put a check to create a Unit Test project. We need the same thing for Silverlight. We should steer the developer into the right direction. Design patterns such as MVVM need to be easier to implement in Silverlight solutions.  I’d go so far as to say that MVVM Light should ship with Visual Studio. With the project / item templates and code snippets, Laurent puts you into the right direction. This is the way that it should have been. Easy for the 9-5 developer to grasp. I believe the majority of developers use code behind because that’s what is in all the demos provided by Microsoft. They are not trying to write sucky code it is that they simply don’t know a better way.  The XAP Files should be obfuscated/unused references deleted by default when in “Release” mode. A better Silverlight experience starts with a smaller XAP file. The less that a user has to download is the better, even with the majority of people on broadband. I would also recommend built-in obfuscation by Microsoft. People are paranoid that they can rename the .zip and run it through reflector. Get rid of the boring install experiences. Here is a great write up on what I’m talking about. The default “Install Silverlight” and “Loading screens” suck. They suck bad. We need a choice of templates that a professional designer has created.  Silverlight needs to supports more image formats. For example: it would be great to use .gif’s without converting them to .png.    Switching between Blend 4 and VS2010 to develop a Silverlight application is a pain. Probably one of the biggest issues that I can’t think of a good solution for. It would be nice if VS2012 had the best of both worlds and you never have to leave VS. We need reporting controls with SSRS included with the Silverlight Toolkit. I can’t think of another control that we need built into the toolkit. It would also be helpful to have export to .xls, .pdf and .doc included with the control. I hope that this post will at least get a few people talking. Who knows, Microsoft could be working on these things right now. Thanks for reading!  Subscribe to my feed CodeProject

  Read the article

• What are some concise and comprehensive introductory guide to unit testing for a self-taught programmer [closed]

  - by Superbest

  I don't have much formal training in programming and I have learned most things by looking up solutions on the internet to practical problems I have. There are some areas which I think would be valuable to learn, but which ended up both being difficult to learn and easy to avoid learning for a self-taught programmer. Unit testing is one of them. Specifically, I am interested in tests in and for C#/.NET applications using Microsoft.VisualStudio.TestTools in Visual Studio 2010 and/or 2012, but I really want a good introduction to the principles so language and IDE shouldn't matter much. At this time I'm interested in relatively trivial tests for small or medium sized programs (development time of weeks or months and mostly just myself developing). I don't necessarily intend to do test-driven development (I am aware that some say unit testing alone is supposed to be for developing features in TDD, and not an assurance that there are no bugs in the software, but unit testing is often the only kind of testing for which I have resources). I have found this tutorial which I feel gave me a decent idea of what unit tests and TDD looks like, but in trying to apply these ideas to my own projects, I often get confused by questions I can't answer and don't know how to answer, such as: What parts of my application and what sorts of things aren't necessarily worth testing? How fine grained should my tests be? Should they test every method and property separately, or work with a larger scope? What is a good naming convention for test methods? (since apparently the name of the method is the only way I will be able to tell from a glance at the test results table what works in my program and what doesn't) Is it bad to have many asserts in one test method? Since apparently VS2012 reports only that "an Assert.IsTrue failed within method MyTestMethod", and if MyTestMethod has 10 Assert.IsTrue statements, it will be irritating to figure out why a test is failing. If a lot of the functionality deals with writing and reading data to/from the disk in a not-exactly trivial fashion, how do I test that? If I provide a bunch of files as input by placing them in the program's directory, do I have to copy those files to the test project's bin/Debug folder now? If my program works with a large body of data and execution takes minutes or more, should my tests have it do the whole use all of the real data, a subset of it, or simulated data? If latter, how do I decide on the subset or how to simulate? Closely related to the previous point, if a class is such that its main operation happens in a state that is arrived to by the program after some involved operations (say, a class makes calculations on data derived from a few thousands of lines of code analyzing some raw data) how do I test just that class without inevitably ending up testing that class and all the other code that brings it to that state along with it? In general, what kind of approach should I use for test initialization? (hopefully that is the correct term, I mean preparing classes for testing by filling them in with appropriate data) How do I deal with private members? Do I just suck it up and assume that "not public = shouldn't be tested"? I have seen people suggest using private accessors and reflection, but these feel like clumsy and unsuited for regular use. Are these even good ideas? Is there anything like design patterns concerning testing specifically? I guess the main themes in what I'd like to learn more about are, (1) what are the overarching principles that should be followed (or at least considered) in every testing effort and (2) what are popular rules of thumb for writing tests. For example, at one point I recall hearing from someone that if a method is longer than 200 lines, it should be refactored - not a universally correct rule, but it has been quite helpful since I'd otherwise happily put hundreds of lines in single methods and then wonder why my code is so hard to read. Similarly I've found ReSharpers suggestions on member naming style and other things to be quite helpful in keeping my codebases sane. I see many resources both online and in print that talk about testing in the context of large applications (years of work, 10s of people or more). However, because I've never worked on such large projects, this context is very unfamiliar to me and makes the material difficult to follow and relate to my real world problems. Speaking of software development in general, advice given with the assumptions of large projects isn't always straightforward to apply to my own, smaller endeavors. Summary So my question is: What are some resources to learn about unit testing, for a hobbyist, self-taught programmer without much formal training? Ideally, I'm looking for a short and simple "bible of unit testing" which I can commit to memory, and then apply systematically by repeatedly asking myself "is this test following the bible of testing closely enough?" and then amending discrepancies if it doesn't.

  Read the article

• Getting Started with ADF Mobile Sample Apps

  - by Denis T

  Getting Started with ADF Mobile Sample Apps   Installation Steps Install JDeveloper 11.1.2.3.0 from Oracle Technology Network After installing JDeveloper, go to Help menu and select "Check For Updates" and find the ADF Mobile extension and install this. It will require you restart JDeveloper For iOS development, be on a Mac and have Xcode installed. (Currently only Xcode 4.4 is officially supported. Xcode 4.5 support is coming soon) For Android development, have the Android SDK installed. In the JDeveloper Tools menu, select "Preferences". In the Preferences dialog, select ADF Mobile. You can expand it to select configure your Platform preferences for things like the location of Xcode and the Android SDK. In your /jdeveloper/jdev/extensions/oracle.adf.mobile/Samples folder you will find a PublicSamples.zip. Unzip this into the Samples folder so you have all the projects ready to go. Open each of the sample application's .JWS file to open the corresponding workspace. Then from the "Application" menu, select "Deploy" and then select the deployment profile for the platform you wish to deploy to. Try deploying to the simulator/emulator on each platform first because it won't require signing. Note: If you wish to deploy to the Android emulator, it must be running before you start the deployment.   Sample Application Details   Recommended Order of Use Application Name Description 1 HelloWorld The "hello world" application for ADF Mobile, which demonstrates the basic structure of the framework. This basic application has a single application feature that is implemented with a local HTML file. Use this application to ascertain that the development environment is set up correctly to compile and deploy an application. See also Section 4.2.2, "What Happens When You Create an ADF Mobile Application." 2 CompGallery This application is meant to be a runtime application and not necessarily to review the code, though that is available. It serves as an introduction to the ADF Mobile AMX UI components by demonstrating all of these components. Using this application, you can change the attributes of these components at runtime and see the effects of those changes in real time without recompiling and redeploying the application after each change. See generally Chapter 8, "Creating ADF Mobile AMX User Interface." 3 LayoutDemo This application demonstrates the user interface layout and shows how to create the various list and button styles that are commonly used in mobile applications. It also demonstrates how to create the action sheet style of a popup component and how to use various chart and gauge components. See Section 8.3, "Creating and Using UI Components" and Section 8.5, "Providing Data Visualization." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 4 JavaDemo This application demonstrates how to bind the user interface to Java beans. It also demonstrates how to invoke EL bindings from the Java layer using the supplied utility classes. See also Section 8.10, "Using Event Listeners" and Section 9.2, "Understanding EL Support." 5 Navigation This application demonstrates the various navigation techniques in ADF Mobile, including bounded task flows and routers. It also demonstrates the various page transitions. See also Section 7.2, "Creating Task Flows." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 6 LifecycleEvents This application implements lifecycle event handlers on the ADF Mobile application itself and its embedded application features. This application shows you where to insert code to enable the applications to perform their own logic at certain points in the lifecycle. See also Section 5.6, "About Lifecycle Event Listeners." Note: iOS, the LifecycleEvents sample application logs data to the Console application, located at Applications-Utilities-Console application. 7 DeviceDemo This application shows you how to use the DeviceFeatures data control to expose such device features as geolocation, e-mail, SMS, and contacts, as well as how to query the device for its properties. See also Section 9.5, "Using the DeviceFeatures Data Control." Note: You must also run this application on an actual device because SMS and some of the device properties do not function on an iOS simulator or Android emulator. 8 GestureDemo This application demonstrates how gestures can be implemented and used in ADF Mobile applications. See also Section 8.4, "Enabling Gestures." 9 StockTracker This application demonstrates how data change events use Java to enable data changes to be reflected in the user interface. It also has a variety of layout use cases, gestures and basic mobile patterns. See also Section 9.7, "Data Change Events."

  Read the article

< Previous Page | 963 964 965 966 967 968 969 970 971 972 973 974  | Next Page >