Search Results

Search found 12992 results on 520 pages for 'box'.

Page 97/520 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

  - by chepukha

  Hi all, I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

  Read the article

• How do I SSH tunnel using PuTTY or SecureCRT through gateway/proxy to development server?

  - by DAE51D

  We have some unix boxes setup in a way that to get to the development box via ssh, you have to ssh into a 'user@jumpoff' box first. There is no direct connection allowed on 'dev' via ssh from anywhere but 'jumpoff'. Furthermore, only key exchange is allowed on both servers. And you always login to the development box as 'build@dev'. It's painful to always do that hopping. I know this can be done with SOCKS or a Tunnel or something... I have setup a FreeBSD VM and I can get things to work awesome using unix ssh tools. Basically all I do is make sure my vm's ~/.ssh/id_rsa.pub key is on both jumpoff and dev and use this ~/.ssh/config file: # Development Server Host ext-dev # this must be a resolvable name for "dev" from Jumpoff Hostname 1.2.3.4 User build IdentityFile ~/.ssh/id_rsa # The Jumpoff Server Host ext Hostname 1.1.1.1 User daevid Port 22 IdentityFile ~/.ssh/id_rsa # This must come below all of the above Host ext-* ProxyCommand ssh ext nc $(echo '%h'|cut -d- -f2-) 22 Then I just simply type "ssh ext-dev" and I'm in like Flynn. The problem is I can't get this same thing to work using either PuTTY or SecureCRT -- and to be honest I've not found any tutorials that really walk me through it. I see many on setting up some kind of proxy tunnel for Firefox, but it doesn't seem to be the same concept. I've been messing with various trial and error most all day and nothing has worked (obviously) and I'm at the end of my ssh knowledge and Google searching. I found this link which seemed to be perfect, but it doesn't work for me. The "Master" connects fine, but the "client" portion doesn't connect. It tells me, the remote system refused the connection. http://www.vandyke.com/support/tips/socksproxy.html I've got the VM, PuTTY and SecureCRT all using the same public/private key pairs to make things consistent and easier to debug. Does anyone have a straight up example of how to do this in Windows?

  Read the article

• Steps after installing vCenter Server?

  - by goober

  I'm working with: Two new ESX servers that I'm configuring A new Server 2008 R2 machine that I'm using for vCenter. I took the following steps: Installed the Hypervisor on the 2 ESX machines Checked their setup/connectivity (appears to be fine; can ping, etc.) Installed vCenter Server on the Win2k8R2 box. This included the install of a SQL Express database (we're a small shop) FYI, I changed some of the ports (443 -- 8443, 80 --8080, etc.) Installed vCenter Web Client Server on the Win2k8R2 box Problems my vSphere Client on my Desktop fails to connect. Part of this is that it asks me for a username and password, but I don't recall specifying one when I set up the install. I receive the error "vSphere Client could not connect to [machinename]. An unknown connection error occurred. (The request failed because of a connection failure. (Unable to connect to the remote server))" I have also tried to use local machine admin credentials, including the format machinename\localuseracct. I have also tried using my domain credentials which are an admin for that box. I have also checked and the service is running. I also tried to connect via vSphere client locally installed on the server. It translates "localhost" to the correct name but gives the same error. I cannot register the vCenter server from the vCenter Web Client Server. I'm not sure if this is necessary, as they're both on the same machine, but it seems like the logical next step. I also receive a "failed to connect" error in this case as well. FYI, both the vCenter server and the vCenter Web Client Server are installed on the same Win2k8R2 server. What am I missing here? What is the best way to test in this case?

  Read the article

• Why can't I unblock postgres with shorewall?

  - by ryeguy

  I can't seem to unblock the port needed for postgres using Shorewall. I am developing a PHP app on my windows machine here, and then I upload it on my linux box to actually use it. The linux box runs the php files as well as hosts the db server. Since I need it working from both machines, in my PHP code I am referring to the database as the full IP instead of localhost. I can easily connect to postgres from my windows machine, but ironically, my PHP app can't connect to postgres even though it's on the same box. Here's what I have in /etc/shorewall/rules: #macro/action src dest PostgreSQL/ACCEPT net $FW PostgreSQL/ACCEPT loc $FW PostgreSQL/ACCEPT loc dmz PostgreSQL/ACCEPT net dmz PostgreSQL/ACCEPT loc net PostgreSQL/ACCEPT dmz $FW PostgreSQL/ACCEPT dmz loc PostgreSQL/ACCEPT dmz net PostgreSQL/ACCEPT dmz dmz Clearly I have a ton of crap there. The first line is all I needed to make it allow a connection from my windows machine. All the lines after it are me just trying everything to get it to work. What am I missing?

  Read the article

• Disabling Skype automatic update

  - by user13267

  How to stop skype from searching or at least downloading update without consent? I want that annoying "Update skype now" dialog box that keeps popping up before I log in to Skype and after I log in to Skype from appearing at all. Few months ago this used to work: 1) C:\Users\”YourName”\AppData\Local\Temp folder. 2) Find the file called SkypeSetup.exe, and delete it. 3) Create a text file in the folder, rename it to SkypeSetup.exe 4) Right click on the new file you just created and ask for properties. 5) Next left click the security tab then left click the advanced button. 6) Now left click “Change Permissions” and then “Add”. Enter “Everyone” (without the quotes) where it sez’, “Enter the object name to select (examples):” and click “OK”. 7) Now check the “Deny” box for “Full control” and click “OK”. obtained from HERE, but now it seems this has stopped working. The worst part is Skype seems to download ~30MB of executable setup file without my knowledge before bugging me with the dialog box to update it, and there seems to be no direct way to disable this download. And disabling the skype updater service does not seem to work either. Is there any kind of patch or registry hack I can use to stop skype from auto updating? Or should I start looking for an alternative to Skype altogether?

  Read the article

• Advice needed: warm backup solution for SQL Server 2008 Express?

  - by Mikey Cee

  What are my options for achieving a warm backup server for a SQL Server Express instance running a single database? Sitting beside my production SQL Server 2008 Express box I have a second physical box currently doing nothing. I want to use this second box as a warm backup server by somehow replicating my production database in near real time (a little bit of data loss is acceptable). The database is very small and resources are utilized very lightly. In the case that the production server dies, I would manually reconfigure my application to point to the backup server instead. Although Express doesn't support log shipping natively, I am thinking that I could manually script a poor man's version of it, where I use batch files to take the logs and copy them across the network and apply them to the second server at 5 minute intervals. Does anyone have any advice on whether this is technically achievable, or if there is a better way to do what I am trying to do? Note that I want to avoid having to pay for the full version of SQL Server and configure mirroring as I think it is an overkill for this application. I understand that other DB platforms may present suitable options (eg. a MySQL Cluster), but for the purposes of this discussion, let's assume we have to stick to SQL Server.

  Read the article

• Remote desktop connection to network printer

  - by andand

  I'm trying to print a document from a remote WinXP machine to a network printer I use on a local Win7 machine using Remote Desktop. The network printer does not appear in the list of those available on the WinXP box. In more detail, the local machine runs Windows 7 (no admin rights) and connects to a network printer managed by a print server (i.e. not using a local TCP/IP Port). I have access to a Windows XP host on a separate network which I access using Remote Desktop. I would like to have print requests from the remote XP box forwarded to the network printer I use on the Windows 7 machine. The XP machine cannot access the print server I use on the Win7 machine nor can it create a TCP/IP port to connect directly to the printer (network configuration issues). After having consulting the KB312135 I confirmed the "Printers" option was selected in the Remote Desktop Client, Local Resources Tab, yet the network printer does not appear on the list of available printers on the XP box. Is this a lost cause or is there something else I haven't managed to locate yet?

  Read the article

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• Windows Service with a Logon user set

  - by David.Chu.ca

  I have a service running in a box with Windows XP and a box of Server (2008). The service is configured as autmactic mode with a logon user/pwd set. The log on user is a local user. The service requires this user setting in order to run. The issue I have right now is that the box intermittently reboot itself. I am going to investigate what is causing the reboot (hardware or application). Regardless the reason, what I need is that the service should be able to recover itself into running state after the reboot. I think the configuration should be able achieve this goal since the user/pwd having been set and its mode being automatic. Do I need to log in as that user to bring the service back? (sometimes the reboot happens in the midnight) I am not sure if there is any difference between Windows XP and Windows Server (2008). The only thing I realize is that when there is a unexpected reboot, the Windows Server will prompt a dialog to explain the previous reboot. Will this prevent any automatic service running or the service will run only the reason has been set?

  Read the article

• Best way to 'harden' embedded ext4 file server against unexpected loss of power?

  - by Jeremy Friesner

  Hi all, First, a little background: my company makes an audio streaming device that is a headless, rack-mounted Linux box with a couple of SSDs attached. Each SSD is formatted with ext4. The users can connect to the system using Samba/CIFS to upload new audio files or access existing ones. There is also custom software for streaming out audio over the network. This is all fine. The only problem is that the users are audio people, not computer people, and see the system as a 'black box', not as a computer. Which means that at the end of the day, they aren't going to ssh in to the box and enter "/sbin/shutdown -h"; they are just going to cut power to the rack and leave, and expect things to still work properly the next day. Since ext4 has journalling, journal checksumming, etc, this mostly works. The only time it doesn't work is when someone uploads a new file via Samba and then cuts power to the system before the uploaded data has been fully flushed to the disk. In that case, they come in the next day and find that their new file has been truncated or is missing entirely, and are unhappy. My question is, what is the best way to avoid this problem? Is there a way to get smbd to call "sync" at the end of every upload? (Performance on uploads isn't so important, since they only happen occasionally). Or is there a way to tell ext4 to automatically flush within a few seconds of any change to a file? (Again, performance can be sacrificed for safety here) Should I set a particular write-ordering mode, activate barriers, etc?

  Read the article

• Sharepoint Workflow "Failed on Start" only when powershell import script is called from task scheduler

  - by Matt Keller

  I created a simple PowerShell script that takes an XML file in a local directory on our sharepoint server and imports it into a specific SharePoint form library. (Content management enabled library if that makes any difference) This script works flawlessly if i run it from the PowerShell command line manually. I call it like such: ".\script_name.ps1". It completes without error and the item is imported into the form library successfully. The workflow begins on the item and everything is happy dandy. However, i run into issues when i setup a scheduled task using Windows Server 2008 R2's task manager. The task runs the script without error and it does actually import the XML into the form library. I looks perfectly normal just as if i had run the script manually. However, after about 10 or 20 minutes the workflow status for that item changes from "In progress" to "Failed on Start (Retrying)". The scheduled task in question is a basic task and has only one action. (Start a program) The "program/script" box is set to "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" and the "Add arguments" box is set to the path of the actual ps1 script. (C:\scripts\sharepoint_import.ps1) I've tried running the task as various users. I've also tried with and without the "Run with highest privileges" check box. Nothing seems to work. For reference, here is the script i am using to import items into the form library.

  Read the article

• Bluehost Emails Getting Blocked

  - by colithium

  A site for my client has the run-of-the-mill "website with users" email pattern. Create an account, get an activation email. Get an email when a subscription is expiring, etc. The site is hosted on Bluehost and currently it uses php's mail() function. There isn't much configuration that is allowed (as far as I know). The trouble is, about a third of these emails disappear into the void. They aren't in spam or junk folders, there's no bounce message, they just cease to exist. I've read about Bluehost email troubles but I can't figure out what my options are for fixing it. These aren't marketing emails, ie they have user-specific information contained within them. I suppose if a solution offers a good templating system that would be fine. What are my options? Excerpt of headers when delivered to a Gmail address: Received-SPF: neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) client-ip=00.000.000.000; DomainKey-Status: good Authentication-Results: mx.google.com; spf=neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) smtp.mail=domain@box###.bluehost.com; domainkeys=pass [email protected]

  Read the article

• Iptables Forwarding problem

  - by ankit

  Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

  Read the article

• Apache 2 Fails to Start After Upgrade with No Errors

  - by Mark Davidson

  Hi all Hoping someone can help me with a server issue. Recently we upgraded to the latest apache on 2 boxes within are organisation. One being the master box the other being for failover. The upgrade went fine on the master box but on the failover box apache fails to start with no errors, being output or logged. Both boxes have the exact same configuration so found this a bit strange. I've reinstalled apache and have been through checking the configs and did not find any obvious errors. Eventally I ran a syntax check on each config file being included and found that one of the files apparently has syntax errors. Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'php_value', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'GeoIPEnable', perhaps misspelled or defined by a module not included in the server configuration I've trippled checked all the modules are enabled but it still fails. I've googled the subject of these errors loads but have been unable to fine a solution. I was wondering if anyone had encountered such a problem before and could point me towards a solution. Thanks for your help in advance. P.s: Apache related versions on server. ii apache2 2.2.3-4+etch10 Next generation, scalable, extendable web se ii apache2-mpm-prefork 2.2.3-4+etch10 Traditional model for Apache HTTPD 2.1 ii apache2-utils 2.2.3-4+etch10 utility programs for webservers ii apache2.2-common 2.2.3-4+etch10 Next generation, scalable, extendable web se ii libapache2-mod-geoip 1.1.8-2 GeoIP support for apache2 ii libapache2-mod-php5 5.2.0+dfsg-8+etch15 server-side, HTML-embedded scripting languag

  Read the article

• Is it possible/practical to install and run Linux on a USB flash drive?

  - by Graeme Donaldson

  I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

  Read the article

• IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing problem

  - by Ernest Mueller

  Hey all, I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

  Read the article

• Can I autoregister my clients/servers in local DNS?

  - by Christian Wattengård

  Right now I have a W2k12 server at home that I run as a domain controller. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my servers). I need to rework my home network for several odd reasons, and in this new scenario there is no place for a big honking W2k12 server box. I have a RasPI, and I have other smallish linux boxen I can use. (In a worst case scenario I'll use my NUC, but then I'll be forced to use my home cinema's UPnP-client for media... The HORROR!!) Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubunto flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment? (Bonus comment upvote for naming the naming scheme :P )

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• Enable re-attached mouse/keyboard via ssh?!

  - by aidan

  I had Ubuntu 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard, booted up and set to work. It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work! I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there? I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade. Thanks for any help! lsusb (with wireless mouse/keyboard receiver unplugged): Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb (with wireless mouse/keyboard receiver attached): Bus 004 Device 005: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Cannot find network path for computer in workgroup of home Windows XP PCs

  - by John Galt

  VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

  Read the article

• How do I set up a Windows NFS share so that I can view it's contents on Linux?

  - by hewhocutsdown

  My NFS server is a Windows XP SP3 box with the Microsoft Windows Services for Unix installed. I have a share configured under C:\NFS with the share name NFS and ANSI encoding. Anonymous access is enabled, with the anon UID/GID set to 0/0. Additionally, I've set ALL MACHINES to Read-Write, and checked the checkbox to Allow root access. My first NFS client is a Ubuntu 10.04 box, with nfs-common installed. Running sudo mount -t nfs 1.1.1.1:/NFS /home/user/NFS succeeds, but when I attempt to view the folder (even as root), it tells me that I do not have the permissions necessary to view the contents of the folder. My second NFS client is an IBM iSeries box running OS/400 V5R3. I used the mount command below: MOUNT TYPE(*NFS) MFS('1.1.1.1:/NFS') MNTOVRDIR('/PARENT/NFS') OPTIONS('rw,nosuid,retry=5,rsize=8096,wsize=8096,timeo=20,retrans=2,acregmin=30,acregmax=60,acdirmin=30,acdirmax=60,soft') CODEPAGE(*BINARY *ASCII) which also mounts successfully. Attempting to WRKLNK '/PARENT/NFS' and use Option 5 to enter the directory yields a Not authorized to object error - even though I am a security officer with the *ALLOBJ special authority. My gut says that it's a problem with the Windows share, but I don't know what it could be. Do you have any suggestions?

  Read the article

• Ram question in VMware Server 2

  - by ToreTrygg

  Hi, I understand from the VMware Server 2 documentation that VMware Server 2 is capable of running a 64-bit guest OS underneath a 32-bit host OS, as long as the hardware running the box is 64-bit capable. Here's my situation. We currently have an underutilized XEON X3220 Quad Core 64bit Server, running Server 2003, 32-bit and 2gb of RAM (the motherboard is capable of 8gb ram). The server is currently used mainly for file and print services. It is also running Active Directory, Novell eDirectory and Groupwise 6.5. We are planning a micration to Microsoft Exchange, so the Novell eDirectory and Groupwise services will eventually be purged from this box, leaving only Active Directory, File and Print services. Being that this server is underutilized we are hoping to save hardware costs and virtualize our new Exchange investment. My question is this. Will VMware allow access to the "invisible" extra memory that Windows 32-bit won't see. Meaning, if we increase the full amount of system ram to 8gb (yes, I know the 32-bit host OS will only see a maximum of 4gb), will I be able to assign maybe 5gb to the new Server 2008 64-bit OS running Exchange and leave 3gb for the Guest OS (or maybe even a 6, 2 split). The second part of that would be, would it be better to just convert the main OS currently running to an image, convert the machine itself to ESXi and run both OSes as images under ESXi. Downtime for this box is critical, so my preference is most definitly with the first option because it presents very minimal downtime. Doing the second would make downtime quite a few hours to image the machine and then convert the image to a VMware Image.

  Read the article

• Expired password change through VPN failure

  - by Tim Alexander

  I am setting up some new accounts to be used by some contractors. they are going to connect via VPN to our network. My requirement is to set the password initially and then have them change it the first time they log in. As a result the "User must Change Password" box is checked. Loading up a laptop and testing has yielded poor results. When logging in I get a notification that the password has expired and a box to fill in, which I do. it then appears again so I dutifully fill in the password details again. I am then presented with a "Sending Password...." error box with Error:619 listed as the reason. Trying to reconnect then gives a 691 error that the password is bad. From the firewall, that is the actualy VPN server, I can see RAD_ACCESS_DENIED and from the DC running NPS (acting as a RADIUS server for the firewall with MS-CHAP-v2 enabled with the "User can change password after it has expired" checked) I cannot see a request to change the password. I can only see Event ID 4776, 4625 and 6273 (reason 16). I can log in with out the change password flag fine so I know logins are being authenticated. Really hoping someone might be able to assist in tracking down the lack of password change processin gon the DC.

  Read the article

• What is the difference between disabling hibernation and idling time for a NAS?

  - by Gary M. Mugford

  I have two D-LINK DNS-323 NAS boxes with two Seagate drives in each. The first one is about a year old, the second one about three months. The first two on Monster are each 1.5T drives while the last two on Origami are 2T drives. I have never been overly happy with the Monster drives but, outside of poor throughput on small files, they have been consistently available to all programs after I put a batch file into my startup to do a directly listing of each. I added the two new drives when I added the Origami box. But, watching the dos box that comes up, I rarely see both listed before the box disappears. Other programs, backups, Belarc, even my file browsers, seem to have a dickens of a time seeing O: and P:. Finally, I decided to go into setup and turn off hibernation. Performance HAS been better since and Belarc, for instance, now sees both drives. At the time of poking around, I noticed an Idle Time feature too. What is the difference between the two settings? And for added points, how much trouble am I in for turning off hibernation? The super bonus round ... anything ELSE I should have done? Thanks in advance, GM

  Read the article

• IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing issue

  - by Ernest Mueller

  I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >