Search Results

Search found 31774 results on 1271 pages for 'chris go'.

Page 97/1271 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Cisco asa 5505 locks up / unresponsive

  - by Chris

  We have a cisco asa 5505 that's new (in service for about 2 months) running 7.2(4) software. Every day around 10a it locks up for approx 10 minutes. We're monitoring it via snmp with stg, and snmp doesn't respond during that time. There's no output in the 'show crash' output. Internet connectivity is also dropped. Wondering if anyone else has seen this and what the fix might be. Currently we're looking at upgrading software, but will need memory upgrade for that. We've forced the speed and duplex on the internal and external interfaces, but the problem is still occurring. It's connected on the internal lan to a netgear 724 gige switch.

  Read the article

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Applications don't see mapped network drive after waking from sleep

  - by Chris

  I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

  Read the article

• Help replacing old Windows 2003 SBS DC with a Win2008 Standard Edition DC

  - by Chris

  Objective: Trying to replace a Windows 2003 SBS domain controller with a windows server 2008 Standard Edition Domain Controller. What I did: used ADPREP. Then all user accounts and OUs are successfully replicated into the 2008 server. I have also managed to transfer all the DC roles (operations master,schema,pdc) into the Server 2008. I have also used NETDOM QUERY FSMO . It displayed that all the roles transferred to the 2008 server. Problem: When I am trying to demote the windows 2003 SBS server using DCPROMO, the message is “No other Active Directory for this domain can be contacted”. I also tried shutting down the 2003 server. Users can login into the domain but they have trouble finding SHARED folders. Can someone help me find out what I did wrong ? Need a little push in the right direction here. Thank you very much ?

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Recommendations for screen-capture tool that retains menus and mouse pointer

  - by Chris Farmer

  There are several screen capture tool questions already on this site, but I think I have a slight tweak to the usual. I'd like a handy screen capture utility that can: Run in Windows 7 Capture a sub-region of the screen Show the current state of the mouse cursor and any active menus I'd like to use it for writing docs that refer to specific application menu items. I like the built-in snipping tool in Windows 7, but the act of using it dismisses my menus, and it doesn't get the mouse cursor either. Do any such tools exist? EDIT: Ahh, I wasn't familiar with the "delayed capture" options of these tools, but they all seem to fit the bill. Thanks!

  Read the article

• SPF record for Gmail?

  - by Chris

  I have DNS, with a SPF TXT record, configured for a domain name. The primary user of the domain name now needs to be able to send both from our SMTP servers, and also from her GMail account. I've seen all the information about adding "include:_spf.google.com" to the SPF TXT record, but, as I look into it, it appears that record is outdated. In particular, I had the user send me a test message, and note that it was: Received: from mail-la0-f50.google.com (mail-la0-f50.google.com [209.85.215.50]) However, _spf.google.com doesn't list that IP address: $ dig +short _spf.google.com txt "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ip4:173.194.0.0/16 ?all" (Note that a 209.85.21*8*.0 network is listed, but not 209.85.21*5*.0.) Is there a better way to enable sending from GMail? This user sends to at least one recipient with a strict SPF policy that bounces mail not from a designated host... Many thanks!

  Read the article

• Enable Soap for PHP 5.5.x on CentOS 6.5

  - by Chris Mancini

  Unfortunately I have to support soap on my server for the Fedex webservice. I recompiled PHP enabling support and it works via CLI but not PHP-fpm. They both point to the same ini file and both show the module loaded, but only CLI shows the configuration values. Output of php -i | grep -i soap Configuration File (php.ini) Path => /usr/local/etc Loaded Configuration File => /usr/local/etc/php.ini Configure Command => './configure' '--prefix=/usr/local' '--with-config-file-path=/usr/local/etc' '--with-config-file-scan-dir=/usr/local/etc/php_user/' '--enable-fpm' '--enable-ftp' '--enable-libxml' '--enable-mbstring' '--enable-pdo' '--enable-soap' '--enable-sockets=shared' '--enable-zip' '--with-curl' '--with-fpm-group=nginx' '--with-fpm-user=nginx' '--with-freetype-dir=/usr/lib64/' '--with-gd' '--with-jpeg-dir=/usr/lib64/' '--with-libdir=lib64' '--with-mcrypt' '--with-openssl' '--with-pdo-mysql' '--with-pear' '--with-readline' '--with-tidy' '--with-xsl' '--with-zlib' '--without-pdo-sqlite' '--without-sqlite3' soap Soap Client => enabled Soap Server => enabled soap.wsdl_cache => 1 => 1 soap.wsdl_cache_dir => /tmp => /tmp soap.wsdl_cache_enabled => 1 => 1 soap.wsdl_cache_limit => 5 => 5 soap.wsdl_cache_ttl => 86400 => 86400 Output from php-fpm phpinfo(): Configuration File (php.ini) Path /usr/local/etc Loaded Configuration File /usr/local/etc/php.ini SOAP Brad Lafountain, Shane Caraveo, Dmitry Stogov Please help, I have tried so many things...

  Read the article

• How can I make WinXP bind to ports other than 1025-5000 for outgoing TCP connections?

  - by Chris Dolan

  (I originally posted a similar question on StackOverflow but readers recommended I post here instead) When you create outgoing TCP connections, most applications let the operating system choose which port to use. Most OSes use the IANA recommended dynamic port range of 49152-65535 for this purpose. But in Windows 2003 and earlier (including XP) Microsoft uses ports 1025-5000. Microsoft lets you change the high end of this range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. I need to have port 4160 free for incoming connections and on rare occasions an outgoing connection steals that port from me before I bind that port.

  Read the article

• Alternatives to ntbackup

  - by Chris J

  Is anyone aware of any good (for a given value of "good") alternatives to ntbackup? There's a few quirks with ntbackup that I still find odd, and occasionally (and for no obvious reason) ntbackup just doesn't back up - usually complaining about that the wrong tape's inserted even though it's been told to just use the tape that's in the drive regardless. I've experiemented with cygwin's tar and cpio and Win32 ports of these utilities, but I've not had any luck getting them to see the tape device (so if someone does use these utilities to write to a tape device, also be interested to know how). Essentially all I'm looking for is a reliable program that I can tell to back-up a list of locations to the tape, and not to care about anything like formatting tapes, or sticking volume labels on them (and conversely then makes it fairly straightforward to restore off as well). On the flip-side, I don't want something that will attempt to manage our tapes. Don't get me wrong here -- ntbackup can do the job, but its quirks are making look at possible alternatives. Any suggestions? If it's open source, even better.

  Read the article

• Backup Exec 12.5 or 2010? [closed]

  - by Chris Thorpe

  Backup Exec 2010 has just dropped, and I'm about to implement a new BEWS infrastructure, complete with CALs and new central servers. When I specced this up last year, I ignored 2010 and focused on Backup Exec 12.5, since it's a mature product. In previous experience, major released of BE had numerous technical issues and seemed to improve significantly at the first service pack. However, our refresh cycle on the backup infrastructure is slow, the main driver usually being lack of support for some new server type (in this case, ESX has driven our current upgrade need). With this in mind, I'm wondering if Backup Exec 2010 should be my first choice, as it'll last longer under current support than 12.5, which will approach EOL soon. Has anyone got any perspective they could add to this? Right now, I'm leaning towards biting the bullet and going with 2010.

  Read the article

• Struggling to set-up NLB cluster

  - by Chris W

  I'm trying to set up NLB on a couple of Windows 2008 R2 virtual servers running on top of Hyper V R2. The servers each have a single vNIC for LAN access (and a second vNIC for SAN access). I'm setting up the cluster to use Multicast mode. The vNICs are each set to allow MAC spoofing. Essentially I'm finding that i can add SERVER1 as a host and it will pick up and respond to the cluster IP from a remote subnet. If I then 'stop' the node in NLB manager it still responds when I would expect it to stop answering on that IP. If I recreate the cluster and add SERVER2 as the first host, the wizard completes correctly and an IPCONFIG on the server shows that it now has the cluster IP but I can't ping the cluster IP from a remote subnet but I can from another machine on the same subnet. As a final test - with both servers in the cluster, pinging from another machine on the same subnet I still get a response from the cluster IP when both nodes are stopped according to the NLB manager. The two VMs are sat on the same physical blade and are built up exactly the same as they'll be used as SharePoint web front end servers. I'm at a loss as to what could be wrong with the second VM that prevents it taking on the address just as the sole node in the cluster, never mind the strange behaviour of the cluster when I stop/start nodes.

  Read the article

• What are the differences between google app mail, and plain ol' [email protected] forwarding to gmail ac

  - by Chris Adams

  I currently have an email address, [email protected], that I currently use to forward to a gmail account that I've used for years. I currently have it set, so I can send email from my [email protected] instead of [email protected]. This is done through the web ui on my current domain name, provider, gandi.net. What are the main differences between this arrangement, and setting up a Google Apps for your domain setup, where I'm explicitly listing in the dns records to point records to point to Google's app mail server?

  Read the article

• What are the differences between google app mail, and plain ol' [email protected] forwarding to gmail ac

  - by Chris Adams

  I currently have an email address, [email protected], that I currently use to forward to a gmail account that I've used for years. I currently have it set, so I can send email from my [email protected] instead of [email protected]. This is done through the web ui on my current domain name, provider, gandi.net. What are the main differences between this arrangement, and setting up a Google Apps for your domain setup, where I'm explicitly listing in the dns records to point records to point to Google's app mail server?

  Read the article

• How do I handle mysql replication in EC2 using private IPs?

  - by chris

  I am trying to set up a mysql master/slave configuration in two EC2 instances. However, every time I reboot an instance, the IP address (and hostname) changes. I could assign an Elastic IP address, but would prefer to use the internal IP address. I can't be the first person to do this, but I can't seem to find a solution. There are a lot of "getting started" guides, but none of them mention how to handle changing IP addresses. So what are the best practices to manage master/slave replication in EC2?

  Read the article

• Tool to modify properties/metadata of a PDF? i.e. Change "Title", "Author"? Sony Reader showing som

  - by Chris W. Rea

  I own a Sony Reader PRS-600 ebook reader. I bought a ton of Manning Publications ebooks (DRM-free) recently. Many of the books are PDFs since not all the ones I wanted are available in epub format. The problem: Some of the PDF books I purchased have incorrect or missing metadata. Making things worse, the Sony Reader only displays the "Title" from the PDF metadata when displaying book titles in the reader's collection of books! The Reader doesn't display the filename. So, even though I have a PDF informatively named "Windows PowerShell In Action.pdf", it shows up as "untitled" in the Reader. Imagine how useful the Reader's list of book titles becomes when many are just "untitled" or "unnamed document" ! Yes, it is maddening. So – short of expecting the publisher to fix the files or Sony to add a filename-based list instead, I'm looking for a way to fix the PDF metadata. I can view the metadata with Adobe Reader, but it doesn't permit modification of the properties. Leading to: Question: Is there a tool – free, or cheap – and either for PC or Mac, that can modify the properties / metadata of a DRM-free PDF document? I want to correct "Title" and "Author" fields, specifically.

  Read the article

• How can I stop new Command Prompt windows spawned by another program from covering my foreground win

  - by Chris W. Rea

  Under Windows 7 x64, when I'm ripping CDs with Exact Audio Copy, it spawns a Command Prompt window each time it invokes the external MP3 compression program I use, LAME. While that's going on, I usually like to surf the web. However, I find it quite annoying that even when Firefox has the foreground, the Command Prompt windows spawned by EAC are coming up in the foreground, on top of my Firefox window. Is there a way to make those new Command Prompt windows spawn in the background? Alternatively, is there a way to make the current active window stay in the foreground / on top while I'm using it?

  Read the article

• How can I set up Redmine => Active Directory authentication?

  - by Chris R

  First, I'm not an AD admin on site, but my manager has asked me to try to get my personal Redmine installation to integrate with ActiveDirectory in order to test-drive it for a larger-scale rollout. Our AD server is at host:port ims.example.com:389 and I have a user IMS/me. Right now, I also have a user me in Redmine using local authentication. I have created an ActiveDirectory LDAP authentication method in RedMine with the following parameters: Host: ims.example.com Port: 389 Base DN: cn=Users,dc=ims,dc=example,dc=com On-The-Fly User Creation: YES Login: sAMAccountName Firstname: givenName Lastname: sN Email: mail Testing this connection works just fine. I have, however, not successfully authenticated with it. I've created a backup admin user so that I can get back in to the me account if I break things, and then I've tried changing me to use the ActiveDirectory credentials. However, once I do, nothing works to log in. I have tried all of these login name options: me IMS/me IMS\me I've used my known Domain password, but no joy. So, what setting do I have wrong, or what information do I need to acquire in order to make this work?

  Read the article

• Have local admin privileges on Windows XP, but getting "Error terminating process: Access is denied"

  - by Chris W. Rea

  On one of the Windows XP machines I use regularly, there is a process that starts up periodically. I'd like to be able to kill the process – sometimes – because it occasionally runs when I'm busy doing something machine-intensive. I've already tried dropping the process priority to "Idle" to mitigate the effects, but it isn't the CPU that's the problem. Rather, the process is very disk-intensive and no matter the process priority, it still causes significant disk thrashing when running, impacting everything else I'm doing at the time. Using Process Explorer, I can find the process, right-click, and choose Kill Process, but I always get the message "Error terminating process: Access is denied." This is not an operating system process, but third-party software. What might that process be doing to prevent itself from being terminated? How can I kill such a process? Is there a way for me to modify the process's security or access control list (ACL) somewhere, using Process Explorer or another tool, so that I can effectively kill it?

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• How can I bind mount a directory with a space in it?

  - by chris

  I have a drive mounted at /media/ that contains a directory with a space in the name - let's call it "My Stuff". I would like to bind mount it to "My Stuff" in my home directory. I tried the following in fstab, but all attempts to mount resulted in a syntax error: /media/My\ Stuff /home/me/My\ Stuff none bind "/media/My\ Stuff" "/home/me/My\ Stuff" none bind "/media/My Stuff" "/home/me/My Stuff" none bind Is there a way to do this?

  Read the article

• Alternative to application pool startMode="AlwaysRunning"

  - by Chris Marisic

  If a web application called for itself to be setup with it's application pool to be configured in the applicationHost.config as: <add name="AppPool" managedRuntimeVersion="v4.0" startMode="AlwaysRunning" /> Would the same result be achieved by just requesting a page from the server every minute? Or does setting startMode to this value have other implications also?

  Read the article

• ubuntu: How can I adjust the mouse scroll wheel sensitivity?

  - by chris

  I just replaced my old Logitech mouse with a Microsoft Wireless Laser mouse, and scrolling is too fast for my liking. How can I adjust the scroll sensitivity?

  Read the article

• Puppet Agent still able to connect to Master after certificate revocation

  - by chris

  In summary: Client connects for the first time and requests cert; on the Master, puppetca -s client is executed; Client gets the cert and completes the run successfully. Fine. But now: on the Master, puppetca -c client is executed and client's cert is not in the cert list anymore; Client connects again and can perform the run as usual; Restarting puppetmasterd doesn't solve the issue. How can I prevent client to connect once its cert has been revoked? Thanks in advance

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >