Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 97/593 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • How would you diagnose an integrated network card that doesn't show up on the device list?

    - by Tomer Gabel
    I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

    Read the article

  • Problem with several USB devices on Windows XP. How to diagnose USB device?

    - by Lukasz Baran
    Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

    Read the article

  • Suggestion of device WiFi range in it's spec. Possible?

    - by SeeR
    I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

    Read the article

  • refresh windows network performance counters in command line

    - by michalv82
    I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

    Read the article

  • How to configure a Logitech USB headset on Fedora 14 [closed]

    - by Humble Debugger
    I have a Logitech USB headset http://www.amazon.com/gp/product/B003NREDG4 but I can't hear anything nor input anything through it. I am working on a Fedora 14 desktop. cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfebdc000 irq 51 2 [Headset ]: USB-Audio - Logitech USB Headset Logitech Logitech USB Headset at usb-0000:00:1d.0-2, full speed /sbin/lsmod | grep -c snd 14 lsusb Bus 008 Device 002: ID 046d:c529 Logitech, Inc. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Please advise

    Read the article

  • Web Development - How to access custom host, defined in my hosts file, from another device in the same network

    - by Neara
    Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

    Read the article

  • Impossible remove Logical Volumes or Volume Group LVM2

    - by abkrim
    After a disk crash part of a LVM group, I can't use LVM2 properly. If like delete a Logical Volume impossible (Error on SATA Volumen) lvscan Couldn't find device with uuid vxHO8W-FPbL-9d5N-GUVb-Lo8d-D9WZ-1RY3Bx. inactive '/dev/sata/isos' [100.00 GiB] inherit inactive '/dev/sata/vm-999-disk-1' [10.00 GiB] inherit inactive '/dev/sata/vm-300-disk-1' [51.00 GiB] inherit ACTIVE '/dev/pve/vm-103-disk-1' [200.00 GiB] inherit lvremove /dev/sata/isos Couldn't find device with uuid vxHO8W-FPbL-9d5N-GUVb-Lo8d-D9WZ-1RY3Bx. Segmentation fault dmsetup remove --force sata device-mapper: table ioctl on sata failed: No such device or address device-mapper: reload ioctl on sata failed: No such device or address device-mapper: remove ioctl on sata failed: No such device or address Command failed Try also, vgreduce --removemissing, and other commands for delete ALL on SATA Volumen and start form 0. PVE volumen it's on production. Apreciate help

    Read the article

  • Windows cannot access the specified device, path, or file. [closed]

    - by Pia
    Possible Duplicate: Windows cannot access the specified device, path, or file. I have recently installed Windows Pro SP2. Whenevr I try to run any .exe file I get the following error: Windows cannot access the specified device, path, or file. You may have not the appropriate permissions to access theXP item. I read some where that if we right click on the file and in Properties-Security click the unblock option, this problem is solved but this is not working for me as I dont get Security tab in Properties.Please help!! Due to this I am not able to install any software in my computer.

    Read the article

  • guvcview recording video and audio out of synchronisation in Ubuntu 10.10

    - by SIJAR
    I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

    Read the article

  • Why am I getting this "Connection to PulseAudio failed" error?

    - by Dave M G
    I have a computer that runs Mythbuntu 11.10. It has an external USB Kenwood Digital Audio device. When I open up pavucontrol, I get this message: If I do as the message suggests and run start-pulseaudio-x11, I get this output: $ start-pulseaudio-x11 Connection failure: Connection refused pa_context_connect() failed: Connection refused How do I correct this error? Update: Somewhere during the course of doing the suggested tests in the comments, a new audio device has now become visible in my sound settings. I have not attached or made any new device, so this must be the result of of some setting change. The device I use and know about is the Kenwood Audio device. The "GF108" device will play sound through the Kenwood anyway, but not reliably: Command line output as requested in the comments: $ ls -l ~/.pulse* -rw------- 1 mythbuntu mythbuntu 256 Feb 28 2011 /home/mythbuntu/.pulse-cookie /home/mythbuntu/.pulse: total 200 -rw-r--r-- 1 mythbuntu mythbuntu 8192 Oct 23 01:38 2b98330d36bf53bb85c97fc300000008-card-database.tdb -rw-r--r-- 1 mythbuntu mythbuntu 69 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-sink -rw-r--r-- 1 mythbuntu mythbuntu 68 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-source -rw-r--r-- 1 mythbuntu mythbuntu 49152 Oct 14 12:30 2b98330d36bf53bb85c97fc300000008-device-manager.tdb -rw-r--r-- 1 mythbuntu mythbuntu 61440 Oct 23 01:40 2b98330d36bf53bb85c97fc300000008-device-volumes.tdb lrwxrwxrwx 1 mythbuntu mythbuntu 23 Nov 16 22:50 2b98330d36bf53bb85c97fc300000008-runtime -> /tmp/pulse-EAwvLIQZn7e8 -rw-r--r-- 1 mythbuntu mythbuntu 77824 Nov 1 12:54 2b98330d36bf53bb85c97fc300000008-stream-volumes.tdb And yet more requested command line output: $ ps auxw|grep pulse 1000 2266 0.5 0.2 294184 9152 ? S<l Nov16 4:26 pulseaudio -D 1000 2413 0.0 0.0 94816 3040 ? S Nov16 0:00 /usr/lib/pulseaudio/pulse/gconf-helper 1000 4875 0.0 0.0 8108 908 pts/0 S+ 12:15 0:00 grep --color=auto pulse

    Read the article

  • Problems with mounting .ISO files

    - by user89599
    I'm using Precise, with GNOME. I've attempted to install some retro, multi-cd games (KOTOR1) via .ISO images and WINE, but I can't get the ISO's to mount correctly. First I tried GMountISO, which showed a read-only warning but worked - until I went to unmount. When the installation program asked for CD 2 I couldn't unmount from the /cdrom folder because neither GMountISO or umount from terminal could detect the mount. After a reboot, I changed to GISOMount (different somehow, I guess?), but when I attempt to mount the ISO I get an error window explaining the syntax of the mount command and, which is also what I get when I attempt to use mount from terminal. After checking /media from terminal on a lark I see the disc mounted there twice over, but umount won't recognize it, even when I specify the full path sudo umount /media/KOTOR_1.iso. It cleared up upon reboot. Can someone please assist? UPDATE :: Thanks for the quick response. What's weird, is the images are like stuck in limbo... I'll show you: sc@sc-HP-110-3700:/media$ ls cdrom KOTOR_1(0)(vcd) KOTOR_1(vcd) sc@sc-HP-110-3700:/media$ cd cdrom sc@sc-HP-110-3700:/media/cdrom$ ls sc@sc-HP-110-3700:/media/cdrom$ cd .. sc@sc-HP-110-3700:/media$ umount KOTOR_1(vcd) bash: syntax error near unexpected token `(' sc@sc-HP-110-3700:/media$ umount KOTOR_1.ISO umount: KOTOR_1.ISO is not mounted (according to mtab) sc@sc-HP-110-3700:/media$ sudo umount -a umount: /run/shm: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /run: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /dev: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) sc@sc-HP-110-3700:/media$

    Read the article

  • My sound stopped working today, how can I fix it?

    - by Oli
    This seems to be a problem with pulseaudio. I was logged in over VNC on my phone and started playing a video this caused X to crash (as sometimes happens). I restarted and suddenly the sound doesn't work. I have a Intel HDA/Realtek ALC889 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller alsamixer is detecting this just fine. PulseAudio doesn't detect this alsa device so is using auto_null as the default sink (logs below). When I properly kill PulseAudio (tell it not to auto-start) direct ALSA communication with the sound card works just fine. speaker-test, for example, works. So the hardware and ALSA layers are fine IMO. In the logs, it seems that the card might be "busy" but I really don't know how or why it would be now (and never before). Is there an ALSA lock file somewhere that it still there because of my crash? I just ran sudo fuser /dev/snd/* and saw this: oli@bert:~$ sudo fuser /dev/snd/* /dev/snd/controlC0: 1884 /dev/snd/pcmC0D0c: 1884m /dev/snd/timer: 1884 A look at the process list (ps aux | grep 1884) tells me process 1884 is arecord -c 1 -f S16_LE -r 8000 -t raw. No idea what this is or why it's running. When I try and kill arecord (as root), it just respawns and rebinds on the hardware. I'm in a very annoying situation where I don't know what is going on and don't know how to find out. I'm open to all suggestions to get this working again. Fire away. And here's what I get when I stop PA auto-loading, kill it and then start it with -vvvv. oli@bert:~$ pulseaudio -vvvvv I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: core-rtclock.c: Timer slack is set to 50 us. D: core-util.c: RealtimeKit worked. I: core-util.c: Successfully gained nice level -11. I: main.c: This is PulseAudio 0.9.21-63-gd3efa-dirty D: main.c: Compilation host: x86_64-pc-linux-gnu D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: main.c: Running on host: Linux x86_64 2.6.38-rc3 #1 SMP Tue Feb 1 10:53:04 GMT 2011 D: main.c: Found 8 CPUs. I: main.c: Page size is 4096 bytes D: main.c: Compiled with Valgrind support: no D: main.c: Running in valgrind mode: no D: main.c: Running in VM: no D: main.c: Optimised build: yes D: main.c: All asserts enabled. I: main.c: Machine ID is 8310740c4729ef474fe5ecec4bbf5a6b. I: main.c: Session ID is 8310740c4729ef474fe5ecec4bbf5a6b-1297338553.571075-1050119523. I: main.c: Using runtime directory /home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-runtime. I: main.c: Using state directory /home/oli/.pulse. I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules. I: main.c: Running in system mode: no I: main.c: Fresh high-resolution timers available! Enjoy ol' chap! I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 I: svolume_mmx.c: Initialising MMX optimized functions. I: remap_mmx.c: Initialising MMX optimized remappers. I: svolume_sse.c: Initialising SSE2 optimized functions. I: remap_sse.c: Initialising SSE2 optimized remappers. I: sconv_sse.c: Initialising SSE2 optimized conversions. D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472 D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes.tdb' I: module-device-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #0; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes.tdb' I: module-stream-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #1; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database.tdb' I: module-card-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus ba7c9a1f90b3d49d930bca2100000015 as :1.62 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'auto_null' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'auto_null.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). D: module-always-sink.c: Autoloading null-sink as no other sinks detected. I: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: sink.c: device.description = "Dummy Output" I: sink.c: device.class = "abstract" I: sink.c: device.icon_name = "audio-card" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: source.c: device.description = "Monitor of Dummy Output" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" D: module-null-sink.c: Thread starting up I: module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'"). I: module.c: Loaded "module-always-sink" (index: #12; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #13; argument: ""). D: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1" D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1 I: module.c: Loaded "module-console-kit" (index: #15; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #16; argument: ""). D: dbus-util.c: Successfully connected to D-Bus session bus efbffc6788fad56cfd64d40c00000018 as :1.182 D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: client.c: Created 1 "Native client (UNIX socket client)" I: client.c: Created 2 "Native client (UNIX socket client)" D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: module-augment-properties.c: Looking for .desktop file for gnome-volume-control-applet D: module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon D: core-subscribe.c: Dropped redundant event due to change event. I: module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ... D: sink.c: Suspend cause of sink auto_null is 0x0004, suspending Note the one section that seems to find the hardware but says it's busy (no idea if this is relevant). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards.

    Read the article

  • How to run installation CD for second monitor?

    - by dobsoft
    I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • How do I prevent missing network from slowing down boot-up?

    - by Ravi S Ghosh
    I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

    Read the article

  • Slow boot on Ubuntu 12.04, probable cause the network connection

    - by Ravi S Ghosh
    I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

    Read the article

  • USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

    - by poolie
    Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

    Read the article

  • Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

    - by Iohannes
    After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

    Read the article

  • ATI Radeon 5800 series dual monitor unity not 3D accelerated

    - by Victor S
    When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

    Read the article

  • SD card won't appear after upgrade to 13.10

    - by Pixel
    My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

    Read the article

  • Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

    - by jmerkow
    I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

    Read the article

  • running an android app on the device instead of on the emulator.

    - by gil
    hi, I've installed the usb driver, i'm running win7. I can see that the driver is installed in the window-android SDK and AVD manager-installed packages but when i'm writing "adb devices" in the cmd it doesnt show like the phone is connected (it is - it has the orange led on..) I'm using the HTC G1. I also did the "Turn on "USB Debugging" on your device" step... anyone got an idea??

    Read the article

  • cannot establish a connection to jdbc:mysql://69.144.150.5:3366/DCQ using com.mysql.jdbc.Driver Communications link failure

    - by Rambo
    I have a database made on the server... How to use this database in our application to be made in netbeans..? I am getting the error : cannot establish a connection to jdbc:mysql://69.144.150.5:3366/DCQ using com.mysql.jdbc.Driver (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.) Please help..thanks..

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >