Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 97/170 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Ubuntu, OpenSuse, the world of linux for a web-developer

  - by SonofWatson

  I'm learning web development. My main OS is windows 7 but I've used Linux and currently dual-booting with Ubuntu. My Linux knowledge however, is pretty limited. I can work with the command line on simple tasks but that's pretty much it. I don't do any shell scripting, don't know very well the most important commands, nor the system in general. I am interested in web development. Should I get myself familiarized more with Linux ? Is it a must for future job positions considering my field of interest?

  Read the article

• How can I prevent my domain controller doing forward lookups for remote users?

  - by markmnl

  I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do an nslookup or simply browse the web the DNS from the VPN provides the DNS answers. I believe this is because it has DNS forwarders, so queries it can't answer are forwarded and then it relays the answer. This is the desired behavior for workstations in the office (they should query their domain controller first); however for remote VPN users this is not desirable. I do not want my remote office's server to answer DNS queries it is not the authority of (which happens to be 192.168.x.x). Is there any way I can configure this?

  Read the article

• Windows server 2008 rejecting packets from client

  - by l46kok

  We deployed a server application in .NET 4.0 that is going to run on Windows Server 2008 R2. Strangely, the clients cannot connect to the server given an external IP and the server port. I've ran wireshark diagnostics on the server computer and verified that the packets are arriving to the NIC without any issue so it seems Windows Server 2008 is the culprit here. I've tried to temporarily disable the firewall and add the server port into inbound/outbound rule but it still doesn't solve the issue. How can I solve this issue?

  Read the article

• Internal USB A Female to motherboard 4-pin that mounts internally

  - by rockinthesixstring

  I'm wondering if anyone knows of a product like this but that is physically mountable internally rather than on a cable? I'm planning on building a super low profile "gateway" pc that is dedicated to handling internet traffic in my home. I have a great 1U rackmountable chassis for an ITX motherboard, but I need the hard drive real estate for the additional NIC required to run a gateway (one onboard and one PCI). So the plan is to use a small 8GB USB Jump Drive for the OS inside the box (as to not have one hanging out the back. And although it's racked, I still don't want the jump drive flopping around internally, so I want it fixed somehow. I have an alternative idea where by I use a flush mount zap strap saddle and a zip tie to hold it in place, but that seems kind of like a hack.

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• The best linux file system and software to read write on it in Windows

  - by Florin

  I am curently having ubuntu and win 7 dual boot and I want to delete my windows 7 and format all my partitions to use a linux file system. But I want to leave a door open in case I have any problems with linux, to be able to acces my linux file system with windows. I know that there are programs that can give you read-write acces to a ext2/3/4 FS (I tested none). I need advice in choosing the right FS, what are the diferences between ext 2/3/4 and what is the best software to do that.

  Read the article

• Atheros wireless not working

  - by Chandru1

  I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Should a programmer know Linux ?

  - by Maxtor

  I'm a PHP/Python programmer learning Java and C#(.NET). My main OS is windows 7 but I've used Linux and currently dual-booting with Ubuntu. My Linux knowledge however, is pretty limited. I can work with the command line on simple tasks but that's pretty much it. I don't do any shell scripting, don't know very well the most important commands, nor the system in general. My interests are web development, mobile apps and maybe some embedded stuff in the future. Should I get myself familiarized more with Linux ? Even if at the moment I'm not that interested in it? Is it a must for future job positions considering my field of interest? Thank you.

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

• Ubuntu boots to totally blank after I installed some graphic card updates

  - by baboonWorksFine

  I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

  Read the article

• Which iPhone/iPod Hardware to Support for iPhone Game

  - by ashes999

  I'm coming from a background of Android. I would like to figure out what kind of iBlah device hardware I need to support for iPhone game development. From my research, it seems that I need to support both iPod and iPhone. But which versions of hardware? is 3G still used? What about 3GS? For example, the -S phones seem to have dual core instead of single-core CPUs. I also worry about performance. In Android, I had a severely low-end phone, which meant pretty much anything that ran okay there ran okay on other phones. For iPhone, how do I figure out what to support in terms of performance?

  Read the article

• GParted doesn't see any partition

  - by Diego

  What I am trying to do couldn't be more logical I think. I have a 40gb drive with two partitions, Xp and Ubuntu. I have dual boot, everything boots and works perfectly. I have about 9gb free in the Windows partition When I run Gparted I only see 40gb unallocated space, booting from Gparted Live CD. What the hell is going on ? I've read everywhere this is a common problem, however it has no sense something like this remains unsolved by gparted developers, considering what I am trying to do is the very basic step anybody wanting to migrate from Windows to Linux would od Something like this honestly doesn't give anything else than frustration Could anybody on this forum be so kind to explain whats' going on ? Thanks

  Read the article

• OpenVPN server behind firewall issues

  - by Gabriel

  I'm trying to setup an OpenVPN but I do have some problems doing it. This is my scenario: INTERNET --- HOME ROUTER (10.1.0.0/28) --- FIREWALL SERVER (DEFAULT GATEWAY FOR MY INTERNAL LAN 10.1.0.2) --- OpenVPN Server (10.1.0.9 LAN | 10.2.0.1 VPN) single nic / bridge iface I can connect to my VPN server successfully (it gets the 10.2.0.5 address). Though, I'm not able to ping anything, neither my VPN server, nor my lan clients. I guess the problem is on the firewall. I'm not really an expert on iptables, I tried adding plenty of different rules without success. I would appreciate a lot if someone could explain me how to get to work the VPN server in this scenario. After connecting through VPN, when I try to ping the server, I'm not really sure about how the ping message gets to the server and how the response should go back to the client. Thanks a lot Gabriel

  Read the article

• WOL not working

  - by Maciej Swic

  I have a Marvell Yukon integrated NIC and i have installed the WOL package on my freeBSD-based NAS. I'm trying to wake my PC using the command "wol M:A:C:A:D:D:R". Command line spits back that it is "waking" however nothing happens. I found no reference to WOL whatsoever in BIOS and i enabled Magic Packet WOL in windows on that interface. Also double-checked MAC addr and that i entered it in the correct format in "wol". I'm on Windows 7. What next? =/

  Read the article

• Ubuntu Slows down over time?

  - by Lucas McCoy

  About a few months ago I was using Ubuntu (doing something in the command line) when it started lagging really bad. I would hit S (or any other key) and like 20 seconds later it would show up in my terminal. Naturally I killed the machine and rebooted. The system started working just fine, but about 30 minutes later it did the same thing. Now I'm forced to use Ubuntu in 30 minute spurts. I've looked at my running processes and none of them are taking large amounts of CPU or RAM. Luckily I've dual-booted so I could still use my machine. Now I need to get this fixed and I'm wondering what my options are. Will I be forced to do a fresh install or is there another way?

  Read the article

• Graphics Driver problem, ATI Radeon HD 3200, small screen size and slows everything down.

  - by Arvind Jangid

  Regards. I am using a: 2009 Compaq Presario CQ40-415AU Notebook AMD Athlon X2 Dual core Processor 2.1 GHz 1024 MB L2 cache 3GB DDR2 RAM ATI Radeon + HD 3200 Graphics 256 MB, screen is 14 inch widescreen with resolution of 1280*800. I installed Ubuntu 12.04 LTS 32bit on my laptop. It works brilliantly until I installed graphics driver. When I installed the driver, the graphics became slow. Everything slowed down. Even the splash screen resolution changed to something like 640*480. I have liked Ubuntu since 9.10 and for the freedom it provides and its versatility, but graphics problem remains the same. I even installed Ubuntu on a 50 GB partition with 6 GB swap partition. My HDD is 320 GB. Please tell me what is wrong.

  Read the article

• High number of ethernet errors. Tool for testing the ethernet card?

  - by Fabio Dalla Libera

  I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

  Read the article

• Have I fixed my partition problem with os x 10.5.8? Are my GPT and MBR back to normal?

  - by David Schaap

  I'm new to linux and I have overstepped by abilities. I tried dual booting os x 10.5.8 with ubuntu 11.10 with rEFIt, but I been having problems with partitioning. Instead of enduring more headaches, I've made the decision to simply use ubuntu on VirtualBox. I've tried to return my HDD to normal, but I am looking for confirmation that my partitions are ok. Here is the report from partition inspector: *** Report for internal hard disk *** Current GPT partition table: # Start LBA End LBA Type 1 409640 233917359 Mac OS X HFS+ Current MBR partition table: # A Start LBA End LBA Type 1 1 234441647 ee EFI Protective MBR contents: Boot Code: GRUB Partition at LBA 409640: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 1, type Mac OS X HFS+ Also, my HDD directory has a bunch of extra folders in them and they appear to be ubuntu related, although it is no longer installed. folders like bin, sbin, cores, var, user, and so on. Those folders aren't supposed to be there, right? Thanks in advance.

  Read the article

• help w/ macbook & latest ubuntu

  - by dirtyglove

  what is the latest version of ubuntu i can run w/ WORKING wifi on my macbook 4,1(early 2008)? i dual booted my mac os x lion alongside 12.10 ubuntu but cant figure how to get the wireless to work? so i downgraded to 10.10 for now.. is 10.10 the latest version i can have on my macbook with working wifi? or is there another? or am i just missing a noobish terminal code to fix the drivers? help appreciated! thanks

  Read the article

• Battery management doesn't recognize removal of power supply

  - by Jason

  I have a Lenovo Y460p running Ubuntu 12.04 (64-bit). The battery does charge normally, but unplugging the power supply only very briefly shows the correct battery indicator. After about 1 second, it reverts to the charging indicator. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My problem is almost exactly like the one in this post: Ubuntu 11.10 power management does not recognize removal of power supply The only exception is that my system does not dual-boot with Windows. This is Ubuntu only. The computer in the other post is a Lenovo as well; not sure if that has anything to do with it. Any help would be greatly appreciated. Thanks.

  Read the article

• Ubuntu suddenly won't boot on a Mac

  - by emchristiansen

  I installed 11.10 in dual-boot mode following instructions here: https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation Everything worked fine, until I recently updated from Mac OS 10.6.x to the latest 10.6.x (this was a minor update prompted by OS X). The update made the rEFIt screen disappear, so I ran Boot Repair and reinstalled rEFIt and everything worked. I accidentally left my computer without power while booted into Ubuntu, until it presumably died or hibernated itself. I have been unable to boot into Ubuntu since. I didn't see the GRUB screen when I selected Linux the rEFIt chooser. Then I reinstalled rEFIt and the Linux option disappeared from the rEFIt chooser. This is a link to the boot info collected by Boot Repair: http://paste.ubuntu.com/755543/ Any help would be appreciated, especially an explanation of what all these components are (EFI, MBR, GPT, GRUB), where they live on disk, how the system knows to find each component, and how they relate to each other. Thanks!

  Read the article

• Screen Corruption in half the screen only

  - by Guy DAmico

  About 50% of the my NATTY desktop screen is corrupted. Once that happens I can re-boot as many times as I want but the problem continues. If I logout and then into WINDOWS for a day I may be successful and boot UBUNTU with a good screen. The desktop is formatted correctly, there's no pixelation, rather there is a fine grained white crosshatch pattern covering the entire screen. If I open any application the screen corruption worsens eventually to the point I can no longer make out anything. I ran ram memory test w/o any errors. I have no display issues when running WINDOWS 7. Any ideas. My computer is a Dual Boot stock DELL 5150 w/3gig of ram an on board video.

  Read the article

• How to fix the boot loader with an installation disk at hand

  - by Bragboy

  Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

  Read the article

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >