Search Results

Search found 10556 results on 423 pages for 'practical approach'.

Page 97/423 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• SQL Server 2008 R2 Enterprise database has unexpected 4GB database size limit

  - by Jesse

  I have SQL Server 2008 R2 Enterprise installed on a local Windows 7 x64 workstation. When I create a database on the server, it unexpectedly has a 4GB size limit (Database properties in SQL Server Management Studio say size = 3934.38 MB, space available = 47.13 MB). Unfortunately the database needs more than 4GB, and Enterprise is not supposed to have a practical maximum size. I confirmed the database is on the Enterprise server: SELECT @@VERSIONMicrosoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) Apr 2 2010 15:48:46 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: ) The database file is not set to restrict growth in SQL Server Management Studio, and there is plenty of hard drive space. The database was copied from SQL Express (which has a 4GB limit), but the same occurs with a fresh database creation. I've spent a couple of hours trying to figure this out and Google-searching, to no avail. Any ideas?

  Read the article

• Fedora12, XP and connection sharing via iptables

  - by Paul L

  Just a quick question ( I Hope ) To find out if what I'm trying is even possible. I am trying to share internet connection with Fedora12 as default gateway and XP machine hooked up via NIC using iptables commands as shown in Mark Sobell's book 'A Practical Guide To Fedora And Red Hat Enterprise Linux' These are the commands as placed in /etc/rc.local iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -j LOG iptables -t NAT -A POSTROUTING -o eth1 -j MASQUERADE I did flip the in and out parameters to match my NIC configuration ( as opposed to example from book ) but other than that followed example. One thing to note is that Sobell did not mention whether this should work with mix of Linux and XP. One other note ( maybe meaningless ) is that I do have samba working between the two machines. Thanks for any insights anyone might have. PL

  Read the article

• More than 3 seconds "Initial Connection" time (webpagetest.org)

  - by George Tasioulis

  I'm having a weird issue with a vBulletin forum, on a 2? Xeon E5645 w/ 16GB RAM, cPanel and LiteSpeed webserver; It takes too long to start loading... When I tested it with webpagetest.org I saw that for every request there's a 3 second "Initial connection" delay, which I don't know why is happening. Here's a screenshot: CPU Load is between 0.03 and 0.05, I've got several GB of free RAM, practical no I/O activity, and this delay can occur even with only one visitor on the forum. Where do you suggest I start searching? What could be the reason for this kind of delay? I don't think it's the webserver, or the forum because there's another website on the server (total 2 sites) which is WordPress based, and has exactly the same issue with the 3 second initial connection delay. I believe it's OS related, but need a clue on where to start looking. Thanks in advance :)

  Read the article

• How to make Excel's "Auto Fit Row Height" feature actually auto fit the row height?

  - by DanM

  For every generation of Excel I can remember (including 2010, which I'm using now), Excel's "Auto Size Row" features sometimes fails to actually auto size a row when the cell contains wrapped text. When it works properly, all the text is revealed and there is no additional space below the last line of text. When it fails, it adds extra space below the text. To make matters worse, what you see is not always what you get, i.e., text that appeared okay on screen gets cut off when it's printed. You also get different sizing depending on whether you are zoomed in/out or at actual size. Simple test case: Why is there a one-line gap after the text in cell A1 but in A2? (I double-checked that I applied Auto Fit Row Height to both rows. Zoom level is 100%.) Is there any known remedy for this without resorting to manually adjusting the row heights (which is not practical for more than a handful of rows)?

  Read the article

• Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

  - by jonathanconway

  I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

  Read the article

• SQL 2008 Mirroring, how to failover from the mirror database?

  - by Luis

  I have configured a database mirroring setup in SQL 2008 using the High-safety, Synchronous mode, without automatic failover. I don't have a Witness instance. Regarding high availability, I understand Mirroring is a better strategy than Log Shipping (faster and smoother failover), and cheaper than Clustering (because of license and hardware costs). According to the MS docs, to do the failover you need to access to the Principal database and in the "Mirror" options click the "Failover" button. But I want to do this from the Mirror database, because what would be the benefit as all this setup is being done in case the Principal server knocks down? Evidently I am missing something. If Mirroring is not a solution for server downtime (as would be Clustering, if I understand correctly), then which practical (i.e. real world examples) cases would benefit from Mirroring for high-availability purposes? Thank you very much for your response! I really need some enlightment.

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

• Is there a serious issue with setting the SUID bit on tcpdump?

  - by Dean

  I'm running tcpdump on a remote machine, and piping the output to Wireshark on my local machine over SSH. In order to do this, I had to set the SUID bit on tcpdump. For background, the remote machine is an Amazon EC2 running "Amazon Linux AMI 2012.09". On this image, there is no root password, and it is not possible to log in as root. You can't use sudo without a TTY, and therefore you have to set the SUID. What are the practical risks of setting this bit on tcpdump? Is there any need to be paranoid? Should I unset it whenever I'm not capturing?

  Read the article

• Is it possible to use Logmein to connect to a sleeping (Mac) computer on a wireless network?

  - by jaydles

  I'm using logmein to access my Mac. So I have the local logmein app running on my MacBook Pro, which is on my home wireless network. I access it either from the website (www.logmein.com) or the Logmein Ignition Apps on the iphone or ipad. My problem is that I have to set my MacBook Pro to not sleep at all when plugged in to make this a practical solution, because logmein cant seem to wake it up. I did change the settings in System Preferences to allow "Wake from Lan", but it seems like this won't work with a a Wifi connection. Am I missing anything? Assuming I'm not, is it bad for my computer to basically leave it running and not asleep most of the time?

  Read the article

• Which hosting will let me execute my own EXE with PHP?

  - by guitar-

  I have a task that PHP (or any server-side scripting language) isn't practical for. It involves a lot of file I/O, processing, etc. and it will execute a lot faster using the program I made in C instead of PHP. Do any hosts allow you to upload your own EXE files and run them on the server using PHP's exec, shell_exec, etc. functions? Do you need a dedicated server to do this? Also, I don't know if Facebook's PHP HipHop is out yet, but I really don't want to use that.

  Read the article

• Mail server hammering

  - by Rodrigo

  I've noticed a quick increase on smtp connections coming to my server, investigating it further i figured out that there's a botnet hammering my smtp server. I've tried to stop it by adding a rule at iptables: -N SMTP-BLOCK -A SMTP-BLOCK -m limit --limit 1/m --limit-burst 3 -j LOG --log-level notice --log-prefix "iptables SMTP-BLOCK " -A SMTP-BLOCK -m recent --name SMTPBLOCK --set -j DROP -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTPBLOCK --rcheck --seconds 360 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --set -A INPUT -p tcp --dport 25 -m state --state NEW -m recent --name SMTP --rcheck --seconds 60 --hitcount 3 -j SMTP-BLOCK -A INPUT -p tcp --dport 25 -m state --state NEW -j ACCEPT That would avoid them from hammering "too fast", however the problem still, there's like 5 tries per second, it's going insane, i had to incrase the maximum number of childs of sendmail/dovecot. There's too many ips to filter out manually and simply changing the smtp to another port is not practical since i got many other clients on that server. I'm using sendmail with dovecot, any ideas to have this filtered out more efficiently?

  Read the article

• How would I / could I obtain an reasonably comprehensive list of domain names?

  - by Simon

  I know that domain names are constantly changing, and I know there are a lot of them, but there is clearly a region of the domain name space which is stable. How would I go about getting a list, even a very big one? Such a thing must logically exist, even if it is in a distributed form, because the web's DNS servers resolve names to IP addresses. So in theory if I could poll all the DNS servers in the world at a moment in time I would have the complete list of mapped names. Is there a practical way of doing that? As an aside, does anyone have any good estimates of how many domain names exist at the moment?

  Read the article

• Max ping response time?

  - by DougN

  I'm wondering what a maximum (practical) ping response time might be. As far as I know, there isn't a max defined anywhere (TTL, but that's hops, not time). As I think about it, I'm not sure I've ever seen a ping response time of more than a second or so. But as far as I know, there is nothing to stop a remote host from waiting (or being really busy) and not sending the response back for a few seconds. As a simple data point, I just pinged a number of servers around the world and the worst time I could find was 350ms.

  Read the article

• How to send a popup message to unknow computer connected to my WLAN?

  - by Leandro

  Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

  Read the article

• Tips for teaching Linux to beginners?

  - by chiborg

  I will teach Linux to people of the ages 20-75 with no prior Linux knowledge. I want to teach some basic concepts (what's an OS, what's a file system) and some practical knowlede: How to install it, network configuration, set up email client, installing software with a packet manager, etc. I have held a system administrators course in the past, but was under the impression that my method of teaching was not adequate. I've explained what I was about to show, showed students on the projector, told them to repeat it on their computers and summarized what they should have learned. They could ask questions all the time. But I fear they remembered only one-third of the knowledge I taught them. I have two questions here: Are there better methods to teach this particular subject in a classroom equipped with computers? Are there some tricks that "slow me down" when I teach stuff that I know inside-out?

  Read the article

• Overcrowded Windows XP Folders

  - by BlairHippo

  I know that, technically, an individual Windows XP directory can hold an immense number of files (over 4.29 billion, according to a quick Google search). However, is there a practical ceiling where too many files in one directory starts having an impact on reads to those files? If so, what factors would exacerbate or help the issue? I ask because my employer has several hundred XP machines in the field at client sites, and the performance on some of the older ones is getting "sludgy." The machines download and display client-defined images, and my supervisor and I suspect that our slacktastic approach to cache management could be to blame. (Some of the directories have tens of thousands of images in them.) I'm trying to gather evidence to support or contest the theory before spending time on a coding fix.

  Read the article

• Fixing mac user file permissions, not the system

  - by Cawas

  Usually those files get wrong permission when coming from the network, even when I copy them from it, but mostly through "file sharing". So, definitely not talking about Disk Utility repair here, please. But regardless of how the file got wrong permission, I know of two bad ways to fix them. One is CMD+I and the other is chown / chmod. The command line isn't all bad but isn't practical either. Some times it's just 1 file I need to repair, sometimes it's a bunch of them. By "repair" I mean 644 for files, 755 for folders, and current user:group for all of them. Isn't there any app / script / automator out there to do that?

  Read the article

• What's the difference between these Intel things?

  - by Coldblackice

  My head still spins with the various Intel "things" that may (or may not) need installing/configuring/yaddayadda'ing: Intel Rapid Storage Technology (is this driver? a software manager/package?), Intel Chipset (i.e., Intel INF Update Utility, Intel RST OROM, Intel RST driver, Intel Matrix Manager, etc. I think I have a basic understanding that the OROM is the low-level BIOS "driver", which communicates with the higher-level RST driver (in Windows). But what's the Chipset Installation software? What's the INF installation/update software? I'm confused as to what the other pieces are (or why there are so many to begin with). And as for a practical matter -- I'm wanting to upgrade my BIOS with a recent Intel OROM included, and then also update the Intel RST drivers in Windows -- BUT, as for the Windows side of things, I don't know what I should uninstall -- the Intel Chipset installer thing (through official uninstaller), Intel RST Manager, finding the individual Intel devices in Device Manager and right-clicking-uninstall/deleting, etc.

  Read the article

• Migrate reports from MS Access to OOo Base

  - by John Gardeniers

  I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

  Read the article

• Reboot VPS by reaching memory limit

  - by Ali

  When a server uses memory more than available RAM, the system will shut down the virtual machine. Then, it is only possible to boot from outside (VPS control panel, e.g. vePortal or SolusVM). However, it should be possible to plan a reboot before possible shut down. What is the best practical method to check the used memory, and reboot the system upon reaching e.g. 90% of the allowed RAM? Is there a common program or script to do so? I am using Debian/Ubuntu.

  Read the article

• Dual WAN port on a WRT54GL

  - by pufferfish

  Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

  Read the article

• Information System for an Academic Institution

  - by birukw

  Hi, The University I am working for is undergoing a major renovation of the ICT system. The team currently undertaking the task is designing a centralized system with the intent of providing most (if not all) services of the institution electronically. Most of us are academicians with little practical experience. The questions we need answers for are What are the systems (preferably free, as in Beer, and/or open) and best-practices in use in other academic institutions? What are the experiences of people administering academic ICT systems? What are the overheads of attempting to provide services through an intranet cloud (like UEC) for us (a medium-sized academic institution, in a third-world country)? We would very much appreciate it if you could give us your take on the situtation. Thanks

  Read the article

• Minimum space required for Server 2008 R1 install?

  - by Chris J

  I'm trying to plan disk space for a virtual environment, and wanting to keep virtual disks as small as possible - mostly as apart from the base OS, the software going onto the VM is less than a few MB, so want to avoid physical disk space going to waste; plus it'll give me an idea of how many VMs I could physically fit in {x}GB of physical drive. For Server 2003, I've had installs on 2GB and 5GB sized virtual disks. However for Server 2008, Microsoft recommends a minimum of 10GB (I assume this is both for x32 and x64). For the record, I will be installing the x32 version. Now I know I could just go ahead and try a small install, but wanted to solicit any practical knowledge as well :-) What's the smallest install of Server 2008 possible? (excluding server core installations).

  Read the article

• Adding extra fan on my setup. please advice on proper Exhaust or Intake of Fan.

  - by Pennf0lio

  Hi, I modify my Computer case so that I can add more computer fan to make my computer cool this summer. I would need your thoughts how I can improve my idea and I'm open to all of your advices. Status: Fan Position (The blue circles are the fan's location) At the side I have to intake blowing fresh air at the motherboard and at the top and back I have Exhaust fan blowing out hot air. The computer fans will be powered by 12v adapter (recycled) so that my power supply wouldn't be overloaded. I need a practical advice, I don't want to spend to much on this. Thanks.

  Read the article

• Deployment of broadband network

  - by sthustfo

  Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >