Search Results

Search found 13183 results on 528 pages for 'sleep mode'.

Page 97/528 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Bash script dosn't open in terminal on reboot

  - by twigg

  Quick overview, I have created a script that reboots the laptop after x amount of time and x amount of cycles. I have added the script to the start-up applications and the script does seem to be running in the background but never opens a terminal Window. Am I missing something? Adding Code (this is saved in a file called countdown.sh) #!/bin/bash # check if passed.txt exists if it does, send to soak test if [ -f passed.txt ]; then echo reboot has passed $nol cycles sleep 5; echo Starting soak tests sleep 5; rm testlog.txt; rm passed.txt; phoronix-test-suite run quick-test exit 0; fi # check if file testlog.txt exists if not create it if [ ! -f testlog.txt ]; then echo >> testlog.txt; fi # read reboot file to see how many loops have been completed exec < testlog.txt nol=0 while read line do nol=`expr $nol + 1` done # start the countdown, x is time limit let x=10; while [ $x -gt 0 ]; do clear; figlet "Rebooting in..."; figlet $x; let x-=1; sleep 1; done; echo reboot success $nol >> testlog.txt; shutdown -r now; # set how many times the script should shutdown the laptop reboot_count=1 # if number of reboots matches nol's then stop the script # create a new text file called passed.txt if [ "$nol" == "$reboot_count" ]; then echo reboot passed $nol cycles >> passed.txt; fi

  Read the article

• Change authentication wifi WPA to WEP on Windows 8

  - by Kites

  I use netsh wlan set hostednetwork mode=allow ssid=Kites key=phambaoViet netsh wlan start hostednetwork To share WiFi from LAN network on laptop (Windows 8) to my other device. When I show information netsh wlan show hostednetwork the supported authentication is WPA. My device support authentication WEP only. How can I change the authentication to WEP? Infomation: Interface name: Wi-Fi Driver : Qualcomm Atheros AR9002WB-1NG Wireless Network A dapter Vendor : Qualcomm Atheros Communications Inc. Provider : Microsoft Date : 03/07/2012 Version : 3.0.0.130 INF file : C:\Windows\INF\netathrx.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11n FIPS 140-2 mode supported : Yes 802.11w Management Frame Protection supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Vendor defined Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP Vendor defined Vendor defined

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues...

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• HP G61 Laptop wont boot- display stays off, caps and num lock indicators blink repeatedly

  - by Benguy12

  I had my HP G61 laptop running in sleep for a while. When I came back to it about a half-hour later, it was no longer in sleep mode - the power light and the Wi-Fi indicator light were on (I keep Wi-Fi off becuase I use a wired connection) - but nothing was showing on screen. In fact, the display wasn't even turned on. So I let it sit for about 10 minutes but nothing happened. I did a force shut down and rebooted. Instead of a normal boot, the display didnt turn on, the Wi-Fi indicator was off, and the Caps Lock and Num Lock lights just blinked repeatedly. On the external keyboard i use, none of the light indicators were blinking or even on. I tried force shut-down again 10 times, then unplugged all connections except for the power cable (my laptop battery dosent hold a charge for more than 2 minutes, so I always must have a wall connection) and tried to boot again but still nothing happened. I unplugged the battery and even then nothing happened. I also tried booting with the disk drive open, and then with it closed again. On the time it was closed, I was able to successfully boot into Windows, but recieved a "Windows did not shut-down sucessfully" notice. Does anybody know why this may have happened? My PC's specs: Windows 7 Home Premium, 64-bit 4GB of physical RAM, 8GB of vRAM (on a flash drive) AMD Vision x64 processor (don't know any other specs about it) ATI Radeon graphics card, 392 MB DVD-R/W lightscribe drive 2 External hard-disks (first one is 1.5TB, second one is 1TB) custom boot-screen and boot-annimation Standard BIOS apps running before sleep: firefox 10.4 itunes 10.6 adobe photoshop extended CS5.1 rockstar games social club (running in background) microsoft powerpoint 2010 professional edition google chrome I was NOT running Aero or any fancy themes - I was using the normal windows classic theme. I have a desktop icon manager application called Stardock Fences that was also running (it runs as a service/process).

  Read the article

• Wake OSX 10.8 over WiFi (WoWL - Wake on WiFi Lan)

  - by WrinkledCheese

  I have a stack of Apple Mac minis running SSH servers for remote login. The problem is that I can't seem to get them to wake up. From what I gathered, as of Mac OSX 10.7 you required to have a boot time option set - darkwake=0 10.7 and darkwake=no 10.8. So I tried this and then I came to the realization that this will probably work for a wired connection but I'm using WiFi. My wired connections are used for another local subnet without Internet access, so I have to get it to wake on WiFi. I realize that I can just set the stack of Mac minis to just not sleep, but I'm looking for a sleep enabled option. These services don't require initial response speed as once the connection is made they will be active and once they are no longer active they will hopefully go back to sleep. I have a FreeBSD box running avahi-daemon in order to try and wake the Macs with the Bonjour Service but it doesn't seem to work. I tried registering the service as Gordon suggested in the below post, but that just makes it so that there isn't a timeout when discovering services and resolving them. It still doesn't allow ssh connections to port 22 when it's asleep. For reference, I want what seems like what Gordon Davisson explained on this question: Wake on Demand for Apache server in OS X 10.8

  Read the article

• samba joined to AD canot see users when in the security tab on client

  - by Jonathan

  I've got samba joined via kerberos and winbindd to our AD network and user authentication and everything else is working great. However when I try to add users/groups to file permissions it tells me they are not found. All the users groups show up fine with getent so I'm not sure why they are not showing up. Here is my smb.conf and I would much appreciate any help with this. #GLOBAL PARAMETERS [global] socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=11264 SO_SNDBUF=11264 workgroup = [hidden] realm = [hidden] preferred master = no server string = xerxes web/file server security = ADS encrypt passwords = yes log level = 3 log file = /var/log/samba/%m max log size = 50 printcap name = cups printing = cups winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes winbind nested groups = Yes winbind separator = + winbind refresh tickets = yes idmap uid = 1600-20000 idmap gid = 1600-20000 template primary group = "Domain Users" template shell = /bin/bash kerberos method = system keytab nt acl support = yes [homes] comment = Home Direcotries valid users = %S read only = No browseable = No create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [test] comment = Test path=/mnt/test writeable=yes valid users = %s create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [printers] comment = All Printers path = /var/spool/cups browseable = no printable = yes

  Read the article

• Save and restore multiple layers within a Photoshop action that flattens

  - by SuitCase

  I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

  Read the article

• Redirect before rewrite

  - by Kirk Strobeck

  Had an issue where I need to redirect old URLs, but not disable the mod_rewrite for page structure. redirect 301 /home.html http://www.url.com/ It needs to live on the Symphony 2.0 .htaccess file ### Symphony 2.0.x ### Options +FollowSymlinks -Indexes <IfModule mod_rewrite.c> RewriteEngine on RewriteBase / ### DO NOT APPLY RULES WHEN REQUESTING "favicon.ico" RewriteCond %{REQUEST_FILENAME} favicon.ico [NC] RewriteRule .* - [S=14] ### IMAGE RULES RewriteRule ^image\/(.+\.(jpg|gif|jpeg|png|bmp))$ extensions/jit_image_manipulation/lib/image.php?param=$1 [L,NC] ### CHECK FOR TRAILING SLASH - Will ignore files RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !/$ RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ $1/ [L,R=301] ### ADMIN REWRITE RewriteRule ^symphony\/?$ index.php?mode=administration&%{QUERY_STRING} [NC,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^symphony(\/(.*\/?))?$ index.php?symphony-page=$1&mode=administration&%{QUERY_STRING} [NC,L] ### FRONTEND REWRITE - Will ignore files and folders RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*\/?)$ index.php?symphony-page=$1&%{QUERY_STRING} [L] </IfModule> ###### Updated redirect 301 ^home.html http://www.url.com/ [L] ### Symphony 2.0.x ### Options +FollowSymlinks -Indexes <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_HOST} !^www\.krista-swim\.com [NC] RewriteRule ^(.*)$ http://www.krista-swim.com/$1 [L,R=301] RewriteBase / ### DO NOT APPLY RULES WHEN REQUESTING "favicon.ico" RewriteCond %{REQUEST_FILENAME} favicon.ico [NC] RewriteRule .* - [S=14] ### IMAGE RULES RewriteRule ^image\/(.+\.(jpg|gif|jpeg|png|bmp))$ extensions/jit_image_manipulation/lib/image.php?param=$1 [L,NC] ### CHECK FOR TRAILING SLASH - Will ignore files RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !/$ RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ $1/ [L,R=301] ### ADMIN REWRITE RewriteRule ^symphony\/?$ index.php?mode=administration&%{QUERY_STRING} [NC,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^symphony(\/(.*\/?))?$ index.php?symphony-page=$1&mode=administration&%{QUERY_STRING} [NC,L] ### FRONTEND REWRITE - Will ignore files and folders RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*\/?)$ index.php?symphony-page=$1&%{QUERY_STRING} [L] </IfModule> ######

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  Hi! I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• Solr startup script problem

  - by Camran

  I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• Help about pure-ftp

  - by hai

  I setup pure-ftp on freebsd behind firewall. On pure-ftp setuped passsi mode ftp(rangle port 50400-50600) and firewall open port from 50400-50600 (include mode IN and out). But i try use ftp client connect but not connect. Nofinication error status: Connecting to 210.245.89.95:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 13:20. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER bk Response: 331 User bk OK. Password required Command: PASS Response: 230 OK. Current directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (210,245,88,98,138,1) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 210.245.88.98:21... Status: Connection established, waiting for welcome message... Help me.

  Read the article

• How to test nginx proxy timeouts

  - by mkorszun

  Target: I would like to test all Nginx proxy timeout parameters in very simple scenario. My first approach was to create really simple HTTP server and put some timeouts: Between listen and accept to test proxy_connect_timeout Between accept and read to test proxy_send_timeout Between read and send to test proxy_read_timeout Test: 1) Server code (python): import socket import os import time import threading def http_resp(conn): conn.send("HTTP/1.1 200 OK\r\n") conn.send("Content-Length: 0\r\n") conn.send("Content-Type: text/xml\r\n\r\n\r\n") def do(conn, addr): print 'Connected by', addr print 'Sleeping before reading data...' time.sleep(0) # Set to test proxy_send_timeout data = conn.recv(1024) print 'Sleeping before sending data...' time.sleep(0) # Set to test proxy_read_timeout http_resp(conn) print 'End of data stream, closing connection' conn.close() def main(): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.bind(('', int(os.environ['PORT']))) s.listen(1) print 'Sleeping before accept...' time.sleep(130) # Set to test proxy_connect_timeout while 1: conn, addr = s.accept() t = threading.Thread(target=do, args=(conn, addr)) t.start() if __name__ == "__main__": main() 2) Nginx configuration: I have extended Nginx default configuration by setting explicitly proxy_connect_timeout and adding proxy_pass pointing to my local HTTP server: location / { proxy_pass http://localhost:8888; proxy_connect_timeout 200; } 3) Observation: proxy_connect_timeout - Even though setting it to 200s and sleeping only 130s between listen and accept Nginx returns 504 after ~60s which might be because of the default proxy_read_timeout value. I do not understand how proxy_read_timeout could affect connection at so early stage (before accept). I would expect 200 here. Please explain! proxy_send_timeout - I am not sure if my approach to test proxy_send_timeout is correct - i think i still do not understand this parameter correctly. After all, delay between accept and read does not force proxy_send_timeout. proxy_read_timeout - it seems to be pretty straightforward. Setting delay between read and write does the job. So I guess my assumptions are wrong and probably I do not understand proxy_connect and proxy_send timeouts properly. Can some explain them to me using above test if possible (or modifying if required).

  Read the article

• Windows 7 BSOD on startup

  - by Cristy

  I got a BSOD today after getting home from 11 hours of work... It seems to work in SAFE MODE (sometimes, not always) The BSOD says: SYSTEM_SERVICE_EXCEPTION STOP: 0x0000003b WimFsf.sys - Address FFFFF88001A6B76B base at FFFFF88001A600000, DateStamp 4a5bc362. Sometimes it shows the welcome screen, shows the destkop for a few seconds and then BSODs Already did: unplugged all the USB devices reset the CMOS I haven't installed any new software recently. What should I do? EDIT: I've managed to get into safe mode and it seems to works fine. When I go into normal mode it shows the desktop then it freezes... Is it more likely to be a software or hardware problem? EDIT2: I've managed to get into normal mode by disabling all the non-microsoft services & startup programs. One more thing: When I shut down my PC, on the "Logging off" screen appear some artifacts. I don't think it's because of my graphics card cause I've opened Black OPS and it worked fine. It's so strange... It still BSODS on startup (but there a ~=10% that it will not), and when it doesn't BSOD's it works fine...

  Read the article

• Unusually high dentry cache usage

  - by Wolfgang Stengel

  Problem A CentOS machine with kernel 2.6.32 and 128 GB physical RAM ran into trouble a few days ago. The responsible system administrator tells me that the PHP-FPM application was not responding to requests in a timely manner anymore due to swapping, and having seen in free that almost no memory was left, he chose to reboot the machine. I know that free memory can be a confusing concept on Linux and a reboot perhaps was the wrong thing to do. However, the mentioned administrator blames the PHP application (which I am responsible for) and refuses to investigate further. What I could find out on my own is this: Before the restart, the free memory (incl. buffers and cache) was only a couple of hundred MB. Before the restart, /proc/meminfo reported a Slab memory usage of around 90 GB (yes, GB). After the restart, the free memory was 119 GB, going down to around 100 GB within an hour, as the PHP-FPM workers (about 600 of them) were coming back to life, each of them showing between 30 and 40 MB in the RES column in top (which has been this way for months and is perfectly reasonable given the nature of the PHP application). There is nothing else in the process list that consumes an unusual or noteworthy amount of RAM. After the restart, Slab memory was around 300 MB If have been monitoring the system ever since, and most notably the Slab memory is increasing in a straight line with a rate of about 5 GB per day. Free memory as reported by free and /proc/meminfo decreases at the same rate. Slab is currently at 46 GB. According to slabtop most of it is used for dentry entries: Free memory: free -m total used free shared buffers cached Mem: 129048 76435 52612 0 144 7675 -/+ buffers/cache: 68615 60432 Swap: 8191 0 8191 Meminfo: cat /proc/meminfo MemTotal: 132145324 kB MemFree: 53620068 kB Buffers: 147760 kB Cached: 8239072 kB SwapCached: 0 kB Active: 20300940 kB Inactive: 6512716 kB Active(anon): 18408460 kB Inactive(anon): 24736 kB Active(file): 1892480 kB Inactive(file): 6487980 kB Unevictable: 8608 kB Mlocked: 8608 kB SwapTotal: 8388600 kB SwapFree: 8388600 kB Dirty: 11416 kB Writeback: 0 kB AnonPages: 18436224 kB Mapped: 94536 kB Shmem: 6364 kB Slab: 46240380 kB SReclaimable: 44561644 kB SUnreclaim: 1678736 kB KernelStack: 9336 kB PageTables: 457516 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 72364108 kB Committed_AS: 22305444 kB VmallocTotal: 34359738367 kB VmallocUsed: 480164 kB VmallocChunk: 34290830848 kB HardwareCorrupted: 0 kB AnonHugePages: 12216320 kB HugePages_Total: 2048 HugePages_Free: 2048 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 5604 kB DirectMap2M: 2078720 kB DirectMap1G: 132120576 kB Slabtop: slabtop --once Active / Total Objects (% used) : 225920064 / 226193412 (99.9%) Active / Total Slabs (% used) : 11556364 / 11556415 (100.0%) Active / Total Caches (% used) : 110 / 194 (56.7%) Active / Total Size (% used) : 43278793.73K / 43315465.42K (99.9%) Minimum / Average / Maximum Object : 0.02K / 0.19K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 221416340 221416039 3% 0.19K 11070817 20 44283268K dentry 1123443 1122739 99% 0.41K 124827 9 499308K fuse_request 1122320 1122180 99% 0.75K 224464 5 897856K fuse_inode 761539 754272 99% 0.20K 40081 19 160324K vm_area_struct 437858 223259 50% 0.10K 11834 37 47336K buffer_head 353353 347519 98% 0.05K 4589 77 18356K anon_vma_chain 325090 324190 99% 0.06K 5510 59 22040K size-64 146272 145422 99% 0.03K 1306 112 5224K size-32 137625 137614 99% 1.02K 45875 3 183500K nfs_inode_cache 128800 118407 91% 0.04K 1400 92 5600K anon_vma 59101 46853 79% 0.55K 8443 7 33772K radix_tree_node 52620 52009 98% 0.12K 1754 30 7016K size-128 19359 19253 99% 0.14K 717 27 2868K sysfs_dir_cache 10240 7746 75% 0.19K 512 20 2048K filp VFS cache pressure: cat /proc/sys/vm/vfs_cache_pressure 125 Swappiness: cat /proc/sys/vm/swappiness 0 I know that unused memory is wasted memory, so this should not necessarily be a bad thing (especially given that 44 GB are shown as SReclaimable). However, apparently the machine experienced problems nonetheless, and I'm afraid the same will happen again in a few days when Slab surpasses 90 GB. Questions I have these questions: Am I correct in thinking that the Slab memory is always physical RAM, and the number is already subtracted from the MemFree value? Is such a high number of dentry entries normal? The PHP application has access to around 1.5 M files, however most of them are archives and not being accessed at all for regular web traffic. What could be an explanation for the fact that the number of cached inodes is much lower than the number of cached dentries, should they not be related somehow? If the system runs into memory trouble, should the kernel not free some of the dentries automatically? What could be a reason that this does not happen? Is there any way to "look into" the dentry cache to see what all this memory is (i.e. what are the paths that are being cached)? Perhaps this points to some kind of memory leak, symlink loop, or indeed to something the PHP application is doing wrong. The PHP application code as well as all asset files are mounted via GlusterFS network file system, could that have something to do with it? Please keep in mind that I can not investigate as root, only as a regular user, and that the administrator refuses to help. He won't even run the typical echo 2 > /proc/sys/vm/drop_caches test to see if the Slab memory is indeed reclaimable. Any insights into what could be going on and how I can investigate any further would be greatly appreciated. Updates Some further diagnostic information: Mounts: cat /proc/self/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=66063000k,nr_inodes=16515750,mode=755 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /dev/mapper/sysvg-lv_root / ext4 rw,relatime,barrier=1,data=ordered 0 0 /proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0 /dev/sda1 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0 tmpfs /phptmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 tmpfs /wsdltmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0 cgroup /cgroup/cpuset cgroup rw,relatime,cpuset 0 0 cgroup /cgroup/cpu cgroup rw,relatime,cpu 0 0 cgroup /cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0 cgroup /cgroup/memory cgroup rw,relatime,memory 0 0 cgroup /cgroup/devices cgroup rw,relatime,devices 0 0 cgroup /cgroup/freezer cgroup rw,relatime,freezer 0 0 cgroup /cgroup/net_cls cgroup rw,relatime,net_cls 0 0 cgroup /cgroup/blkio cgroup rw,relatime,blkio 0 0 /etc/glusterfs/glusterfs-www.vol /var/www fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 /etc/glusterfs/glusterfs-upload.vol /var/upload fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 172.17.39.78:/www /data/www nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 0 0 Mount info: cat /proc/self/mountinfo 16 21 0:3 / /proc rw,relatime - proc proc rw 17 21 0:0 / /sys rw,relatime - sysfs sysfs rw 18 21 0:5 / /dev rw,relatime - devtmpfs devtmpfs rw,size=66063000k,nr_inodes=16515750,mode=755 19 18 0:11 / /dev/pts rw,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000 20 18 0:16 / /dev/shm rw,relatime - tmpfs tmpfs rw 21 1 253:1 / / rw,relatime - ext4 /dev/mapper/sysvg-lv_root rw,barrier=1,data=ordered 22 16 0:15 / /proc/bus/usb rw,relatime - usbfs /proc/bus/usb rw 23 21 8:1 / /boot rw,relatime - ext4 /dev/sda1 rw,barrier=1,data=ordered 24 21 0:17 / /phptmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 25 21 0:18 / /wsdltmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 26 16 0:19 / /proc/sys/fs/binfmt_misc rw,relatime - binfmt_misc none rw 27 21 0:20 / /cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset 28 21 0:21 / /cgroup/cpu rw,relatime - cgroup cgroup rw,cpu 29 21 0:22 / /cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct 30 21 0:23 / /cgroup/memory rw,relatime - cgroup cgroup rw,memory 31 21 0:24 / /cgroup/devices rw,relatime - cgroup cgroup rw,devices 32 21 0:25 / /cgroup/freezer rw,relatime - cgroup cgroup rw,freezer 33 21 0:26 / /cgroup/net_cls rw,relatime - cgroup cgroup rw,net_cls 34 21 0:27 / /cgroup/blkio rw,relatime - cgroup cgroup rw,blkio 35 21 0:28 / /var/www rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-www.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 36 21 0:29 / /var/upload rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-upload.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 37 21 0:30 / /var/lib/nfs/rpc_pipefs rw,relatime - rpc_pipefs sunrpc rw 39 21 0:31 / /data/www rw,relatime - nfs 172.17.39.78:/www rw,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 GlusterFS config: cat /etc/glusterfs/glusterfs-www.vol volume remote1 type protocol/client option transport-type tcp option remote-host 172.17.39.71 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote2 type protocol/client option transport-type tcp option remote-host 172.17.39.72 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote3 type protocol/client option transport-type tcp option remote-host 172.17.39.73 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote4 type protocol/client option transport-type tcp option remote-host 172.17.39.74 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume replicate1 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote1 remote2 end-volume volume replicate2 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote3 remote4 end-volume volume distribute type cluster/distribute subvolumes replicate1 replicate2 end-volume volume iocache type performance/io-cache option cache-size 8192MB # default is 32MB subvolumes distribute end-volume volume writeback type performance/write-behind option cache-size 1024MB option window-size 1MB subvolumes iocache end-volume ### Add io-threads for parallel requisitions volume iothreads type performance/io-threads option thread-count 64 # default is 16 subvolumes writeback end-volume volume ra type performance/read-ahead option page-size 2MB option page-count 16 option force-atime-update no subvolumes iothreads end-volume

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

• Multiple logins with pam_mount means multiple (redundant) mounts ...

  - by Jamie

  I've configured pam_mount.so to automagically mount a cifs share when users login; the problem is if a user logs into multiple times simultaneously, the mount command is repeated multiple times. This so far isn't a problem but it's messy when you look at the output of a mount command. # mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) I'm assuming I need to fiddle with either the pam.d/common-auth file or pam_mount.conf.xml to accomplish this. How can I instruct pam_mount.so to avoid duplicate mountings?

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• SSH Keys Authentication keeps asking for password

  - by Rhyuk

  Im trying to set access from ServerA(SunOS) to ServerB(Some custom Linux with Keyboard Interactive login) with SSH Keys. As a proof of concept I was able to do it between 2 virtual machines. Now in my real life scenario it isnt working. I created the keys in ServerA, copied them to ServerB, chmod'd .ssh folders to 700 on both ServerA,B. Here is the log of what I get. debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: Peer sent proposed langtags, ctos: debug1: Peer sent proposed langtags, stoc: debug1: We proposed langtags, ctos: en-US debug1: We proposed langtags, stoc: en-US debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 125/256 debug1: bits set: 1039/2048 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXX.XXX.XXX.XXX' is known and matches the RSA host key. debug1: Found key in /XXX/.ssh/known_hosts:1 debug1: bits set: 1061/2048 debug1: ssh_rsa_verify: signature correct debug1: newkeys: mode 1 debug1: set_newkeys: setting new keys for 'out' mode debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: set_newkeys: setting new keys for 'in' mode debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /XXXX/.ssh/identity debug1: Trying public key: /xxx/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /xxx/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Password: Password: ServerB has pretty limited actions since its a custom propietary linux. What could be happening? EDIT WITH ANSWER: Problem was that I didnt have those settings enabled in the sshd_config (Refer to accepted answer) AND that while pasting the key from ServerA to ServerB it would interpret the key as 3 separate lines. What I did was, in case you cant use ssh-copy-id like I couldnt. Paste the first line of your key in your "ServerB" authorized_keys file WITHOUT the last 2 characters, then type yourself the missing characters from line 1 and the first one from line 2, this will prevent adding a "new line" between the first and second line of the key. Repeat with the 3d line.

  Read the article

• Save and restore multiple layers within a Photoshop action that flattens

  - by SuitCase

  I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

  Read the article

• Disk operations in windows 7 are slow

  - by Skadlig

  My computer started lagging last Sunday. I tried to reboot it and it failed. Trying to boot into failsafe mode takes around two hours. It mainly freezes on two files: scsiport.sys and classpnp.sys When it finally has started all disc operations are really slow. When it has run for a while it goes faster, probably due to data moved into RAM instead. It froze on an other file before that was associated with Avast but uninstalling it didn't really help. A critical windows update was installed on Sunday but rolling back the update didn't help. I had a guess about the sound card but disabling the sound card drivers also didn’t help. I have an inkling of an idea that it might be Intel rapid storage technology that might be acting up but it doesn't allow me to reinstall it from failsafe mode and I haven't been able to log into normal mode for a while. I would appreciate suggestions regarding how to get into normal mode again and/or what can be the root cause.

  Read the article

• Removing HttpModule for specific path in ASP.NET / IIS 7 application?

  - by soccerdad

  Most succinctly, my question is whether an ASP.NET 4.0 app running under IIS 7 integrated mode should be able to honor this portion of my Web.config file: <location path="auth/windows"> <system.webServer> <modules> <remove name="FormsAuthentication"/> </modules> </system.webServer> </location> I'm experimenting with mixed mode authentication (Windows and Forms). Using IIS Manager, I've disabled Anonymous authentication to auth/windows/winauth.aspx, which is within the location path above. I have Failed Request Tracing set up to trace various HTTP status codes, including 302s. When I request the winauth.aspx page, a 302 HTTP status code is returned. If I look at the request trace, I can see that a 401 (unauthorized) was originally generated by the AnonymousAuthenticationModule. However, the FormsAuthenticationModule converts that to a 302, which is what the browser sees. So it seems as though my attempt to remove that module from the pipeline for pages in that path isn't working. But I'm not seeing any complaints anywhere (event viewer, yellow pages of death, etc.) that would indicate it's an invalid configuration. I want the 401 returned to the browser, which presumably would include an appropriate WWW-Authenticate header. A few other points: a) I do have <authentication mode="Forms"> in my Web.config, and that is what the 302 redirects to; b) I got the "name" of the module I'm trying to remove from the inetserv\config\applicationHost.config file; c) I have this element in my Web.config file: <modules runAllManagedModulesForAllRequests="false">; d) I tried a <location> element for the path in which I set the authentication mode to "None", but that gave a yellow exception page that the property can't be set below the application level. Anyone had any luck removing modules in this fashion?

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• FTP timeout but SSH is working?

  - by nmarti

  I have a problem in my server, when I try to connect via FTP to a domain, the connexion is VERY slow, and I get timeouts just listing files in a directory. When I try to connect to the domain folder using the root user account via SSH, it works fine, and I can download the files without problem. What can be wrong? I tried to reboot the server, also the office router, and nothing... It is a fedora core 7 server with proftpd. Can it be a filesystem problem? Thanks. CONNECTION LOG: Cmd: MLST about.php 250: Start of list for about.php modify=20120910092528;perm=adfrw;size=2197;type=file;UNIX.group=505;UNIX.mode=0644;UNIX.owner=10089; about.php End of list Cmd: PASV 227: Entering Passive Mode (***hidden***). Data connection timed out. Falling back to PORT instead of PASV mode. Connection falling back to port (PORT) mode. Cmd: PORT ***hidden*** 200: PORT command successful Cmd: RETR about.php Could not accept a data connection: Operation timed out.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >