Search Results

Search found 32327 results on 1294 pages for 'ubuntu upgrade'.

Page 97/1294 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Ubuntu 12.04 terminal only after nvidia driver upgrade

  - by user1613361

  I recently installed Ubuntu 12.04 (after getting tired of Windows). Installation went fine. I had one problem when I got in suspend mode and then resumed my screen was scrambled. After some googling founds some tips to upgrade my nvidia drivers. I did this, and rebooted but only a terminal windows appears now instead of a graphical desktop. Tried to fix it by several reboots, and removing xorg.conf, but still no luck. Any advice how to fix it and get my desktop back ?

  Read the article

• Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

  - by mvburgos

  Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

  Read the article

• Adobe Flash Player Upgrade

  - by user211743

  I am running Lubuntu right now and I'm new to Linux. I went to youtube and it said I needed to upgrade Adobe Flash Player and litte window in the to left hand corner came up saying to install plugin needed so I pressed it and then it said no suitable plugins found. So then I Pressed download from Adobe and I just downloded the first thing which was Yum assuming thats the linux version of the plugin I needed. Then I opened the yum download and Archive Manager came up and now I don't know what to do. Help Please

  Read the article

• Upgrade from 10.04 to 11.04, must maintain minimum kernel 2.6.38

  - by Steve

  I have a machine running 10.04 and am using BTRFS with lzo compression. I upgraded the kernel to 2.6.38 to enable this (using a PPA). I have my /home folder on a separate (4 TB) BTRFS drive. / is on ext4. My only complaint with this setup is that it uses the old BTRFS tools. How can I upgrade first to 10.10, then 11.04 as required, when 10.10 uses 2.6.35? I don't want it to crash/choke on mounting /home. Will it just let me keep booting the newer kernel I have while upgrading?

  Read the article

• 12.04 to 12.10 upgrade failure

  - by Toscano

  In upgrading 12.04 to 12.10 via system upgrade when the system rebooted all I got was my desk-top without any command icons. Now all my files are locked into 12.10 and no way to retrieve them. I finally reinstalled 12.04 in a new partition but I don't have the knowledge on how to access 12.10 from it. Being a newbie with Linux I feel like I have all thumbs. I'd like to correct 12.10 but have to idea on what the problem is or how to access it. HELP!!!

  Read the article

• CA SiteMinder Configuration for Ubuntu

  - by Matt Franklin

  I receive the following error when attempting to start apache through the init.d script: *apache2: Syntax error on line 186 of /etc/apache2/apache2.conf: Syntax error on line 4 of /etc/apache2/mods-enabled/auth_sm.conf: Cannot load /apps/netegrity/webagent/bin/libmod_sm22.so into server: libsmerrlog.so: cannot open shared object file: No such file or directory* SiteMinder does not officially support Ubuntu, so I am having trouble finding any configuration documentation to help me troubleshoot this issue. I successfully installed the SiteMinder binaries and registered the trusted host with the server, but I am having trouble getting the apache mod to load correctly. I have added the following lines to a new auth_sm.conf file in /etc/apache2/mods-available and symlinked to it in /etc/apache2/mods-enabled: SetEnv LD_LIBRARY_PATH /apps/netegrity/webagent/bin SetEnv PATH ${PATH}:${LD_LIBRARY_PATH} LoadModule sm_module /apps/netegrity/webagent/bin/libmod_sm22.so SmInitFile "/etc/apache2/WebAgent.conf" Alias /siteminderagent/pwcgi/ "/apps/netegrity/webagent/pw/" <Directory "/apps/netegrity/webagent/pw/"> Options Indexes MultiViews ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> UPDATE: Output of ldd libmod_sm22.so: ldd /apps/netegrity/webagent/bin/libmod_sm22.so linux-gate.so.1 = (0xb8075000) libsmerrlog.so = /apps/netegrity/webagent/bin/libsmerrlog.so (0xb7ec0000) libsmeventlog.so = /apps/netegrity/webagent/bin/libsmeventlog.so (0xb7ebb000) libpthread.so.0 = /lib/tls/i686/cmov/libpthread.so.0 (0xb7e9a000) libdl.so.2 = /lib/tls/i686/cmov/libdl.so.2 (0xb7e96000) librt.so.1 = /lib/tls/i686/cmov/librt.so.1 (0xb7e8d000) libstdc++.so.5 = /usr/lib/libstdc++.so.5 (0xb7dd3000) libm.so.6 = /lib/tls/i686/cmov/libm.so.6 (0xb7dad000) libgcc_s.so.1 = /lib/libgcc_s.so.1 (0xb7d9e000) libc.so.6 = /lib/tls/i686/cmov/libc.so.6 (0xb7c3a000) libsmcommonutil.so = /apps/netegrity/webagent/bin/libsmcommonutil.so (0xb7c37000) /lib/ld-linux.so.2 (0xb8076000) UPDATE: The easiest way to set environment variables for the Apache run user in Ubuntu is to edit the /etc/apache2/envvars file and add export statements for any library paths you may need

  Read the article

• Setting up Tomcat6 properly in Ubuntu 10.04

  - by aasukisuki

  We have a Tomcat6 instance running on Ubuntu 10.04LTS. Our test box was just a Windows machine running Tomcat6. Both machines (Linux and Windows) have 1GB of ram. Via the Tomcat configuration tool in windows, I was able to set the min/max/permgen sizes of the JVM. Those were set to 256/512/128 respectively. Now on the Ubuntu box, I've tried setting the JVM options in several different places including: Adding JAVA_OPTS & CATALINA_OPTS in /etc/environment Adding JAVA_OPTS in $CATALINA_HOME/bin/catalina.sh Creating setenv.sh and adding JAVA_OPTS in $CATALINA_HOME/bin Adding JAVA_OPTS directly to /etc/init.d/tomcat6 Un-commenting the JAVA_OPTS and modifying it in /etc/default/tomcat6 Nearly all of those methods did not work, except for modifying /etc/init.d/tomcat6 directly (and possibly the /etc/default/tomcat6 change, but I just did that). However, my understanding is that when you change these settings, only one JVM should be used for the entire tomcat6 instance, and that memory is shared among the applications. On our windows box, tomcat6 is run as a service, and appears to behave this way. However, when I look at htop on the linux box, there are 20+ tomcat6 instances (I have an app that triggers internal jobs every X seconds using chron, so maybe these are threads? Or are they actual instances) all with those memory settings. The app runs fine for a bit, but eventually ends up locking up. I'm guessing each of these apps thinks it has 512m to work with and never GC's and then locks tomcat up completely. What is the proper way to set all of this up?

  Read the article

• therubyracer on Ubuntu install issues with ruby-2.0.0-p247

  - by Victor S

  I can't seem to get therubyracer gem installed on ubuntu, i get the following errors, anyone can help? ERROR: Error installing therubyracer: ERROR: Failed to build gem native extension. /home/victorstan/.rvm/rubies/ruby-2.0.0-p247/bin/ruby extconf.rb checking for main() in -lpthread... yes creating Makefile make compiling constraints.cc compiling array.cc compiling value.cc compiling invocation.cc compiling primitive.cc compiling trycatch.cc compiling context.cc compiling exception.cc compiling template.cc compiling accessor.cc compiling object.cc compiling script.cc compiling external.cc compiling stack.cc compiling gc.cc compiling backref.cc compiling heap.cc compiling v8.cc compiling constants.cc compiling date.cc compiling function.cc compiling rr.cc compiling message.cc compiling init.cc compiling string.cc compiling handles.cc compiling signature.cc compiling locker.cc linking shared-object v8/init.so g++: /home/victorstan/.rvm/gems/ruby-2.0.0-p247@global/gems/libv8-3.11.8.17-x86_64-linux/vendor/v8/out/ia32.release/obj.target/tools/gyp/libv8_base.a: No such file or directory g++: /home/victorstan/.rvm/gems/ruby-2.0.0-p247@global/gems/libv8-3.11.8.17-x86_64-linux/vendor/v8/out/ia32.release/obj.target/tools/gyp/libv8_snapshot.a: No such file or directory make: *** [init.so] Error 1 Update It seems it's trying to use a 32 bit library instead of a 64 bit library, anyone else experience issue trying to install 64 bit applications and packages on Ubuntu, and it trying to install 32 bit version instead (even though the system is a 64 Linux)? Related: https://github.com/cowboyd/therubyracer/issues/262

  Read the article

• can't get php mail() working on Ubuntu desktop version with sendmail and postfix

  - by EricP

  I'm running Ubuntu 9.10 LAMP and trying to do a simple email test with PHP and I'm not getting any emails sent. mail("[email protected]", "eric-linux test", "test") or die("can't send mail"); I get no errors from PHP when running that script. In my php.ini file is: sendmail_path = /usr/lib/sendmail -t -i $ sudo ps aux | grep sendmail eric 2486 0.0 0.4 8368 2344 pts/0 T 14:52 0:00 sendmail -s “Hello world” [email protected] eric 8747 0.0 0.3 5692 1616 pts/2 T 16:18 0:00 sendmail eric 8749 0.0 0.3 5692 1636 pts/2 T 16:18 0:00 sendmail start eric 9190 0.0 0.3 5692 1636 pts/2 T 19:12 0:00 sendmail start eric 9192 0.0 0.3 5692 1616 pts/2 T 19:12 0:00 sendmail eric 9425 0.0 0.3 5692 1620 pts/1 T 19:37 0:00 sendmail eric 9427 0.0 0.3 6584 1636 pts/1 T 19:37 0:00 sendmail restart eric 9429 0.0 0.3 5692 1636 pts/1 T 19:38 0:00 /usr/lib/sendmail restart eric 9432 0.0 0.1 3040 804 pts/1 R+ 19:38 0:00 grep --color=auto sendmail When I run $ sendmail start it just hangs there doing nothing. I installed postfix also to see if it would help, but it didn't. I tried to see port 25: eric@eric-linux:~$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 eric-linux ESMTP Postfix (Ubuntu) thanks

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• Cannot install jdk 1.5 on Ubuntu 12.04

  - by u123

  I have installed Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-23-generic x86_64). Some info about the machine: $ grep --color "model name" /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz I need to install jdk5 to support an old application. I have tried: ~$ sudo apt-get install openjdk-5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package openjdk-5-jdk I have also tried: ~$ sudo apt-get install sun-java5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package sun-java5-jdk So its not available in the repos. I have tried to follow this guide (adding the jaunty repos): http://leonardo-pinho.blogspot.dk/2010/11/java-15-no-ubuntu-1010.html but same result. Then I have tried to download jdk-1_5_0_22-linux-i586.bin from here: http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html#jdk-1.5.0_22-oth-JPR and do: ~$ chmod a+x jdk-1_5_0_22-linux-i586.bin ~$ sudo ./jdk-1_5_0_22-linux-i586.bin Sun Microsystems, Inc. Binary Code License Agreement yes Unpacking... Checksumming... 0 0 Extracting... ./jdk-1_5_0_22-linux-i586.bin: 424: ./jdk-1_5_0_22-linux-i586.bin: ./install.sfx.19556: not found ./jdk-1_5_0_22-linux-i586.bin: 1: cd: can't cd to jdk1.5.0_22 Any suggestions?

  Read the article

• Ubuntu 10.04 preseed unattended install results in faulty partition table

  - by joschi

  I'm currently trying to set up an unattended installation of Ubuntu 10.04 (Lucid Lynx) through preseeding. But whenever I try to create a custom partition scheme, the Debian installer (which Ubuntu is using) produces a faulty partition table. I've taken the partition scheme described in the example preseed file: d-i partman-auto/expert_recipe string \ boot-root :: \ 40 50 100 ext3 \ $primary{ } $bootable{ } \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ /boot } \ . \ 500 10000 1000000000 ext3 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ / } \ . \ 64 512 300% linux-swap \ method{ swap } format{ } \ . Unfortunately it also produces an incorrect partition table on the disk. The installation process itself is working and the installed system eventually boots and is working, as far as I can tell. But fdisk and cfdisk are still complaining: # fdisk -l /dev/sda Disk /dev/sda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a1cdd Device Boot Start End Blocks Id System /dev/sda1 * 1 5 37888 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 5 2089 16736257 5 Extended /dev/sda5 5 2013 16121856 83 Linux /dev/sda6 2013 2089 613376 82 Linux swap / Solaris cfdisk even refuses to start at all: # cfdisk /dev/sda FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder parted on the other hand does not complain about the cylinder boundary of /dev/sda1: # parted /dev/sda p Model: VMware Virtual disk (scsi) Disk /dev/sda: 17.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 39.8MB 38.8MB primary ext4 boot 2 40.9MB 17.2GB 17.1GB extended 5 40.9MB 16.5GB 16.5GB logical ext4 6 16.6GB 17.2GB 628MB logical linux-swap(v1) Since the installed system is working, it shouldn't be a big problem but I'm afraid that this will mean trouble in the future.

  Read the article

• Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

  - by bradley.ayers

  I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

  Read the article

• Installing ubuntu 12.04, installs but does not boot after it asks me to remove the CD

  - by Randnum

  I'm Trying to install Ubuntu 12.04 on my computer. It had an old copy of Windows 7 on it I tried to reformat the hard drive for a fresh install of Ubuntu but I think I messed up the partitions in some way that prevents it from fully loading. I'm able to complete the install fine and use guided partitioning so it should be happy but when it gets about 90% through at the part that ejects the cd and restarts the system it fails. After ejecting the CD and restarting it just loads up the bios lenovo splash screen then purple then black. I can hear a sound from my speakers like some notification sound but there is no text on my screen. I've since gone back in under Rescue System to try and reconfigure the partitions hoping that it will fix it and i've tried several combinations. Currently it's SCST1 (0,0,0) (sda) - 500.1 GB ATA WDC WD5000AAkKX-0 #1 100.0 MB K biosgrub #2 494.1 GB B K ext4 / #3 5.9 GB F swap swap 8.2 kb FREE SPACE I'm not sure if I need to set the ext4 to contain the boot flag but if I don't include at least one partition with the boot flag enabled it complains saying that "The partition table format in use on your disks normally requires you to create a separate partition for boot loader code. This partitionshould be marked for use as an "EFI boot Partition" and should be at least 35 MB in size. Note that this is not hte same as a partition mounted on /boot" Like I said it seems to have installed all of the actual data from the CD it's just not properly booting for some reason

  Read the article

• How to use a retail Windows 7 Professional license key to upgrade an installed Windows 7 Home Premium machine

  - by jalperin

  I purchased a retail version of Windows 7 Professional and installed it on a computer. That machine has died, and I replaced it with a new computer which came with Windows 7 Home Premium already installed. I'd like to have Professional, not Home Premium, on the new machine, and I don't want to pay for an "Anytime Upgrade" because I already have a valid Windows 7 Professional license (for the dead computer). Is there a way to legally upgrade using my Professional license key? I've already installed programs, data, etc on the new machine, so I don't want to reformat and start from scratch.

  Read the article

• Cannot print certain colours on Ubuntu with HP Laser Printer

  - by ILMV

  We have a load of machines running Ubuntu in our office, they are either on 8.04 or 9.10. We have a server which connects a HP JetDirect that connects to a HP 3550 Colour Laser printer using CUPS. The problem we are having is we cannot print red, magenta or yellow at 100%, I've got a picture of the Ubuntu test page to demonstrate my problem: This is obviously a pretty big problem as we are constantly receiving documents with these colours and cannot successfully print them off, we cannot just switch the grayscale, our business depends on being able to print colour (seems trivial but we handle lots of artwork). We're using the recommended driver HP Color LaserJet 3550 footmatic/pxljr (recommended), there is another driver in the list labelled HP Color LaserJet 3550 footmatic/hpijs. These are production printers so need to make sure any setting change won't kick is in the nuts. It would appear HPIJS is for HP Inkjets, makes sense I guess. The problem doesn't occur in Windows. RESOLVED I've managed to solve the problem, I did indeed use the HPIJS driver (apparently for inkjets) but it seems to have worked, we're going to roll with it for now to see how we get on with it.

  Read the article

• Bash wonkyness on Ubuntu versus RHEL

  - by d34dh0r53

  Fellow faulters, I'm playing around with a one liner that I've developed on a RHEL 5.4 box and I have it working perfectly: TOTAL_RAM=`free | grep Mem: | awk '{ print $2 }'`; \ ps axo rss,comm,pid | awk -v total_ram=$TOTAL_RAM \ '{ proc_list[$2] += $1; } END { for (proc in proc_list) \ { proc_pct = (proc_list[proc]/total_ram)*100; printf("%d\t%s\t%0.2f%\n", proc_list[proc],proc,proc_pct); }}' \ | sort -n | tail -n 10 Which outputs something like the following on my RHEL box: 3736 logmon 0.01% 4156 EvMgrC 0.01% 4692 hald 0.01% 5020 ntpd 0.02% 6252 sshd 0.02% 7784 cvd 0.02% 9224 snmpd 0.03% 13068 dsm_sa_datamgr3 0.04% 23320 dsm_om_connsvc3 0.07% 4249864 mysqld 12.90% However on my Ubuntu 9.04 slice I get this: awk: run time error: not enough arguments passed to printf("%d %s %0.2f% ") FILENAME="-" FNR=104 NR=104 33248 console-kit-dae 3.17 I think it has to be bash that is borking something, but I'm really not doing anything that should be that bash specific. The RHEL box is running: # yum info bash | grep -e Version -e Release Version : 3.2 Release : 24.el5 And the Ubuntu box: # apt-cache show bash | grep -e Version Version: 3.2-5ubuntu1 I haven't dug into this super deeply, and thought I'd ping my fellow johnnys to see if you've ever run across this before. /bow

  Read the article

• Ubuntu 11.10 Virtual-box Unity 3D not working

  - by naveen

  After struggling for four hours, I still cannot get Unity 3D of Gnome 3 to work on my VirtualBox - I have been pouring through Internet and forum posts but to no avail. Here's what I've done so far: VirtualBox 4.1.4r74921 on Windows 7 Installed Ubuntu Desktop 11.10 ( 32 bit ) Enabled 3D acceleration Allocated 1.5GB of RAM Allocated 50MB video memory (hope this is not the culprit) Installed Guest edition 4.1.4 Did apt-get update and apt-get upgrade Booted back in to Ubuntu - falls back to Unity 2D Shared folder, mouse integration all works, so guest edition is properly installed Tried the command and below is the output /usr/lib/nux/unity_support_test –p OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.11 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I am trying to find what the "no" means but cannot find any good answers. Inter Core i5 processor 4GB of RAM on the host Display adapter: NVIDIA GeForce 8400GS Is anyone else facing the same problem? If so, can you point me to a solution or any reference where I can find a solution?

  Read the article

• USB keyboard stopped working in Ubuntu with error -71

  - by tapan

  I have a usb keyboard which was working perfectly till now (about a year since i have been regularly using ubuntu). It suddenly stopped working. It stopped working when I connected a USB HDD. Now the keyboard works randomly .. working for a while and then stops working for a longer time. Here is the dmesg output : [ 705.817076] usb 5-1: device not accepting address 8, error -71 [ 705.928032] usb 5-1: new low speed USB device using uhci_hcd and address 9 [ 706.336060] usb 5-1: device not accepting address 9, error -71 [ 706.448055] usb 5-1: new low speed USB device using uhci_hcd and address 10 [ 706.568044] usb 5-1: device descriptor read/64, error -71 [ 706.792049] usb 5-1: device descriptor read/64, error -71 [ 707.008060] usb 5-1: new low speed USB device using uhci_hcd and address 11 [ 707.128041] usb 5-1: device descriptor read/64, error -71 [ 707.352052] usb 5-1: device descriptor read/64, error -71 [ 707.456068] hub 5-0:1.0: unable to enumerate USB device on port 1 Based on the suggestions here i tried the following two things: echo -1 > /sys/module/usbcore/parameters/autosuspend echo Y > /sys/module/usbcore/parameters/old_scheme_first However, i am still facing the same problem. Can anyone help me out with this ? I'm using Ubuntu 10.04 Lucid Lynx.

  Read the article

• Ubuntu 12.04 glusterfs volume failed to mount at boot time

  - by user183394

  I have just setup 7 KVM guests, all running Ubuntu 12.04 LTS 64bit Minimal server to test out glusterfs 3.2.5 from the Ubuntu official repo. Two of them form a mirrored pair (i.e. replica 2), and five of them are clients. I am still new to this file system and would like to gain some "hands-on" experience. The setup was mostly uneventful, until I put in the following into each glusterfs client's /etc/fstab: 192.168.122.120:/testvol /var/local/testvol glusterfs defaults,_netdev 0 0, where 192.168.122.120 is the IP address of the first "glusterfs server". If I issue either a manaul mountall or a mount.glusterfs 192.168.122.120:/testvol /var/local/testvol on CLI, a mount shows that the volume is successfully imported. But once a client is rebooted, after it comes back up, the volume is not mounted! I searched the Internet, and found this article, but since I am not running both client and server on the same node, IMHO it's not strictly applicable. So, as a kludgy "get-around", I put in a sleep 3 && mount.glusterfs 192.168.122.120:/testvol /var/local/testvol into each client node's /etc/rc.local. It seems to be able to get the volume mounted on each node, as far as I can tell. But this is quite ugly, and I would appreciate a hint as to how to resolve this glusterfs-non-boot-time-mounting issue correctly. Note that I used the IP address of the first "glusterfs server" although the /etc/hosts of all nodes have been populated with their hostnames. I figured that the use of IP address is more robust. --Zack

  Read the article

• Postfix not sending email after upgrading to Ubuntu 12.04

  - by Luke

  After upgrading a server from Ubuntu 10.04 to 12.04, postfix is no longer sending email through sendgrid.com. I followed this guide about 6 months ago and everything had been working perfectly until the upgrade. Now it doesn't seem to be authenticating with sendgrid. This is the error I get in my syslog when I try to send an email. May 22 10:19:55 server postfix/smtp[3844]: 983B11C5DA: to=<to address>, relay=smtp.sendgrid.net[174.36.32.204]:587, delay=0.05, delays=0.01/0/0.04/0, dsn=5.0.0, status=bounced (host smtp.sendgrid.net[174.36.32.204] said: 550 Cannot receive from specified address <sendgrid username>: Unauthenticated senders not allowed (in reply to MAIL FROM command)) This is from postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = no config_directory = /etc/postfix header_size_limit = 4096000 inet_interfaces = loopback-only mailbox_size_limit = 0 mydestination = localhost, mylinode.members.linode.com myhostname = hostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relayhost = [smtp.sendgrid.net]:587 smtp_sasl_auth_enable = yes smtp_sasl_mechanism_filter = login smtp_sasl_password_maps = hash:/etc/postfix/sasl/sendgrid smtp_sasl_security_options = noanonymous smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Any help would be greatly appreciated. I would be happy to post any other logs or other relevant information.

  Read the article

• Configuring vlans on Cisco SG200 series switch with Ubuntu server

  - by nixnotwin

  I created a vlan on Ubuntu with vconfig tool with 21 as id and eth1 as the host port. I connected eth1 to one of the ports on the swtich (GE23) as all ports trunk by default. In the webgui I created a vlan named test with the id 21 and I made GE2 are port as an access port. In port to vlan mapping I selected vlan 21 and added it port GE2 by selecting untagged option. I have assigned 192.168.1.1/24 as the ip of eth1.21 on Ubuntu. If I connect another cleint pc to GE2 port with a ip of 192.168.1.2/24 I cannot ping the server ip (192.168.1.1/24). Ping from server to client also does not work. I inspected packets that are sent out eth1 on the server and I could see the vlan 21 tag. And I connect the other end of the cable to a different Linux pc and inspected the packets but no vlan tags can be seen. What could be preventing me from getting vlans working? Edit 1 screenshots:

  Read the article

• Xorg eating up too much RAM on Ubuntu 9.10 box

  - by Yang

  Xorg is eating up 444MB of 2GB total RAM on my Ubuntu 9.10 x86_64 machine with nvidia drivers installed for the nvidia G86 (GeForce 8300 GS). top shows: top - 18:21:41 up 6 days, 2:40, 9 users, load average: 0.46, 1.12, 1.22 Tasks: 266 total, 3 running, 262 sleeping, 1 stopped, 0 zombie Cpu(s): 8.4%us, 2.0%sy, 0.0%ni, 89.1%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055736k total, 1965136k used, 90600k free, 3952k buffers Swap: 979924k total, 979908k used, 16k free, 102636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1432 root 20 0 1154m 442m 7492 S 8 22.0 32:56.97 Xorg 18462 yang 20 0 1001m 219m 8356 S 0 10.9 5:13.25 chrome 24099 yang 20 0 865m 83m 13m S 0 4.2 0:06.91 chrome xrestop shows: xrestop - Display: :0.0 Monitoring 47 clients. XErrors: 0 Pixmaps: 40430K total, Other: 142K total, All: 40573K total res-base Wins GCs Fnts Pxms Misc Pxm mem Other Total PID Identifier 1c00000 21 46 1 19 697 9128K 18K 9146K 3169 x-nautilus-desktop 1000000 4 3 0 17 194 9000K 4K 9004K 3134 gnome-settings-daemon 1600000 51 2 1 25 1100 7648K 28K 7676K ? compiz For comparison, here's my other Ubuntu box, which also has compiz etc. enabled but with ATI RV370 (Radeon X300SE): top - 18:18:18 up 58 days, 4:27, 9 users, load average: 0.00, 0.00, 0.00 Tasks: 224 total, 1 running, 223 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.3%sy, 0.0%ni, 98.8%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024964k total, 987124k used, 37840k free, 247012k buffers Swap: 2048276k total, 94296k used, 1953980k free, 264744k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24324 yang 20 0 61936 35m 6364 S 0 3.5 4:35.84 nxagent 1768 ntop 20 0 190m 32m 5388 S 1 3.2 283:36.15 ntop 1178 root 20 0 60588 29m 1788 S 0 3.0 5:48.89 console-kit-dae ... 1315 root 20 0 343m 4956 4020 S 0 0.5 3:43.87 Xorg Any ideas on how to get to the bottom of this? (i.e. not "Log out"/"Reboot") Thanks in advance.

  Read the article

• can't get php mail() working on Ubuntu desktop version with sendmail and postfix

  - by user36428

  I'm running Ubuntu 9.10 LAMP and trying to do a simple email test with PHP and I'm not getting any emails sent. mail("[email protected]", "eric-linux test", "test") or die("can't send mail"); I get no errors from PHP when running that script. In my php.ini file is: sendmail_path = /usr/lib/sendmail -t -i $ sudo ps aux | grep sendmail eric 2486 0.0 0.4 8368 2344 pts/0 T 14:52 0:00 sendmail -s “Hello world” [email protected] eric 8747 0.0 0.3 5692 1616 pts/2 T 16:18 0:00 sendmail eric 8749 0.0 0.3 5692 1636 pts/2 T 16:18 0:00 sendmail start eric 9190 0.0 0.3 5692 1636 pts/2 T 19:12 0:00 sendmail start eric 9192 0.0 0.3 5692 1616 pts/2 T 19:12 0:00 sendmail eric 9425 0.0 0.3 5692 1620 pts/1 T 19:37 0:00 sendmail eric 9427 0.0 0.3 6584 1636 pts/1 T 19:37 0:00 sendmail restart eric 9429 0.0 0.3 5692 1636 pts/1 T 19:38 0:00 /usr/lib/sendmail restart eric 9432 0.0 0.1 3040 804 pts/1 R+ 19:38 0:00 grep --color=auto sendmail When I run $ sendmail start it just hangs there doing nothing. I installed postfix also to see if it would help, but it didn't. I tried to see port 25: eric@eric-linux:~$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 eric-linux ESMTP Postfix (Ubuntu) thanks

  Read the article

• Problems starting autossh on boot [ubuntu]

  - by Ken

  I'm trying to automatically start an SSH tunnel to my server on boot from a ubuntu box. I have an ubuntu box that's mounted on an 18-wheeler and is networked behind an air card. The box hosts a mysql database that i'm trying to have replicated when the aircard is connected. As I can never be sure of my IP and how many or which routers I'm behind I'm connected to my replication server with an SSH tunnel. I got that working using the following command: ssh -R 3307:localhost:3307 [email protected] Now I'd like that to start whenever the box is, and be alive all the time, so I installed auto-ssh and setup this little script: ID=xkenneth HOST=erdosmiller.com AUTOSSH_POLL=15 AUTOSSH_PORT=20000 AUTOSSH_GATETIME=30 AUTOSSH_DEBUG=yes AUTOSSH_PATH=/usr/bin/ssh export AUTOSSH_POLL AUTOSSH_DEBUG AUTOSSH_PATH AUTOSSH_GATETIME AUTOSSH_PORT autossh -2 -fN -M 20000 -R 3307:localhost:3306 ${ID}@${HOST} I've tried putting this scrip in /etc/init.d/ and using a post-up command in /etc/network/interfaces as well as putting it in /etc/network/if-up.d/. In both situations the script starts on boot, but the tunnel doesn't appear to be correctly established. The script works when run manually.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >