Search Results

Search found 2679 results on 108 pages for 'water cooler v2'.

Page 97/108 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Juniper SSG-5 subinterface vlan routing to the internet

    - by catfish
    I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

    Read the article

  • Openswan + xl2tpd connections time out after a while

    - by Halfgaar
    I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

    Read the article

  • Cyrus on CentOS with sasl / pam / ldap

    - by Oscar
    SASL/PAM/LDAP is driving me crazy... that's what I read a lot when googling for problems in this area, and what I experience myself :-S I'm trying to get Cyrus imap working for virtual hosting on CentOS with this authorisation backend and really don't know what's happening. In saslauthd I configured the LDAP search filter to use, but it looks like pam completely ignores it. Here's what I do for testing (done more tests but all with similar results): [root@testserv ~]# imtest -u [email protected] -a [email protected] WARNING: no hostname supplied, assuming localhost S: * OK [CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS] testserv. Cyrus IMAP4 v2.3.7-Invoca-RPM-2.3.7-7.el5_6.4 server ready C: C01 CAPABILITY S: * CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS ACL RIGHTS=kxte QUOTA MAILBOX-REFERRALS NAMESPACE UIDPLUS NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND BINARY SORT SORT=MODSEQ THREAD=ORDEREDSUBJECT THREAD=REFERENCES ANNOTATEMORE CATENATE CONDSTORE IDLE LISTEXT LIST-SUBSCRIBED X-NETSCAPE URLAUTH S: C01 OK Completed Please enter your password: C: L01 LOGIN [email protected] {6} S: + go ahead C: <omitted> S: L01 NO Login failed: authentication failure Authentication failed. generic failure Security strength factor: 0 C: Q01 LOGOUT * BYE LOGOUT received Q01 OK Completed Connection closed. The LDAP entry does exist (and so does the mailbox in Cyrus): [root@testserv ~]# ldapsearch -WxD cn=Manager,o=mydomain,c=com [email protected] Enter LDAP Password: # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: [email protected] # requesting: ALL # # myuser, accounts, testserv.mydomain.com, mydomain, com dn: uid=myuser,ou=accounts,dc=testserv.mydomain.com,o=mydomain,c=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uidNumber: 16 uid: myuser gidNumber: 5 givenName: My sn: Name mail: [email protected] cn: My Name userPassword:: dYN5ebB0fXhNRn1pZllhRnJX7Uk= shadowLastChange: 15176 homeDirectory: /dev/null # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 This is what I get in /var/log/messages Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] ... /var/adm/auth.log Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:11 testserv cyrus/imap[12514]: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: ldapdb Aug 2 04:00:19 testserv saslauthd[5926]: DEBUG: auth_pam: pam_authenticate failed: User not known to the underlying authentication module Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] (AFAIK I can ignore the auxprop msg) ... and /var/log/slapd.log: Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 ACCEPT from IP=127.0.0.1:51403 (IP=0.0.0.0:389) Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 BIND dn="" method=128 Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 RESULT tag=97 err=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SRCH base="o=mydomain,c=com" scope=2 deref=0 filter="([email protected])" Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=2 UNBIND Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 closed These are the settings in In /etc/imapd.conf: sasl_mech_list: PLAIN LOGIN sasl_pwcheck_method: saslauthd ## sasl_auxprop_plugin: sasldb sasl_auto_transition: no and my sasl config: [root@testserv ~]# cat /etc/sysconfig/saslauthd # Directory in which to place saslauthd's listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd # Mechanism to use when checking passwords. Run "saslauthd -v" to get a list # of which mechanism your installation was compiled with the ablity to use. MECH=pam # Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS="-c -r -O /etc/saslauthd.conf" [root@testserv ~]# cat /etc/saslauthd.conf ldap_servers: ldap://127.0.0.1/ ldap_search_base: dc=%d,o=mydomain,c=com ldap_auth_method: bind #ldap_filter: (|(uid=%u)((&(mail=%u@%d)(accountStatus=active))) ldap_filter: (&(mail=%u@%d)(accountStatus=active)) ldap_debug: 1 ldap_version: 3 The accountStatus=active is not in ldap yet, but that doesn't make a difference since I don't see it in the filter... that's not the reason for the failure. The weird thing is, I do get an error when I rename or remove /etc/saslauthd.conf, but when the file exists it seems happily ignored... The filter in slapd.log seems to be taken from /etc/ldap.conf. Apart from some timers, that only contains: host 127.0.0.1 base o=mydomain,c=com pam_login_attribute mail Outcommenting the pam_login_attribute results in this filter in slapd.log: filter="([email protected])" Pam-imap looks like this: [root@testserv ~]# cat /etc/pam.d/imap auth required pam_ldap.so debug account required pam_ldap.so debug #auth sufficient pam_unix.so likeauth nullok #auth sufficient pam_ldap.so use_first_pass #auth required pam_deny.so #account sufficient pam_unix.so #account sufficient pam_ldap.so The outcommented stuff is because I don't have the cyrus admin user in Ldap; that's a Linux user. That works fine when uncommented, but I still need to play around with that a little and first I wanna get imap working. Finally nsswitch: [root@testserv ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: compat ldap group: compat ldap shadow: compat ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus Any info where to start looking will be greatly appreciated! Thnx in advance

    Read the article

  • Recently "exposed" to Clicksor

    - by I take Drukqs
    Previous information concerning my issue can be found here: Virus...? Tons of people talking. Not sure where else to ask. I heard the loud sounds and whatnot from one of the ads but nothing was harmed and other than having the life scared out of me nothing was immediately affected. Literally nothing has changed. I really don't know what to do. My PC seems fine and from what Malwarebytes and Spybot tells me none of my files have been infected with anything. If you need more information I will be glad to supply it. Thanks in advance. Malwarebytes quick and full scan: Clean. Spybot S&D scan: Clean. HijackThis log: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 5:23:33 PM, on 2/2/2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe C:\Program Files (x86)\Pidgin\pidgin.exe C:\Program Files (x86)\Steam\Steam.exe C:\Program Files (x86)\Mozilla Firefox\firefox.exe C:\Program Files (x86)\uTorrent\uTorrent.exe C:\Fraps\fraps.exe C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe C:\Program Files (x86)\Trend Micro\HiJackThis\HiJackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = R3 - URLSearchHook: SearchHook Class - {BC86E1AB-EDA5-4059-938F-CE307B0C6F0A} - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\AddressBarSearch.dll F2 - REG:system.ini: UserInit=userinit.exe O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Windows Live ID Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [BCU] "C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe" O4 - HKLM\..\Run: [JMB36X IDE Setup] C:\Windows\RaidTool\xInsIDE.exe O4 - HKLM\..\Run: [NUSB3MON] "C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe" O4 - HKLM\..\Run: [ISUSScheduler] "C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe" -start O4 - HKLM\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files (x86)\Adobe\Reader 10.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\RunOnce: [Malwarebytes' Anti-Malware] C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe /install /silent O4 - HKCU\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AppleChargerSrv - Unknown owner - C:\Windows\system32\AppleChargerSrv.exe (file missing) O23 - Service: Browser Configuration Utility Service (BCUService) - DeviceVM, Inc. - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCUService.exe O23 - Service: DES2 Service for Energy Saving. (DES2 Service) - Unknown owner - C:\Program Files (x86)\GIGABYTE\EnergySaver2\des2svr.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files (x86)\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe O23 - Service: JMB36X - Unknown owner - C:\Windows\SysWOW64\XSrvSetup.exe O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: NVIDIA Driver Helper Service (NVSvc) - Unknown owner - C:\Windows\system32\nvvsvc.exe (file missing) O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: NVIDIA Stereoscopic 3D Driver Service (Stereo Service) - NVIDIA Corporation - C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%SystemRoot%\system32\Wat\WatUX.exe,-601 (WatAdminSvc) - Unknown owner - C:\Windows\system32\Wat\WatAdminSvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 7889 bytes

    Read the article

  • php crashes with no core file and this message : apc_mmap failed

    - by greg0ire
    Description of the problem Regularly, cron php processes crash on our production server, which result in mails with the following body : PHP Fatal error: PHP Startup: apc_mmap: mmap failed: in Unknown on line 0 Segmentation fault (core dumped) I think the Segmentation fault (core dumped) should result in core files being handled by apport and then written in /var/crashes, but the files I can see there are there since yesterday, although the last crash occured today : -rw-r----- 1 root whoopsie 1138528 mai 22 04:09 _usr_bin_php5.0.crash -rw-r----- 1 frontoffice whoopsie 1166373 mai 20 18:00 _usr_bin_php5.1005.crash -rw-r----- 1 frontoffice whoopsie 81622658 mai 22 00:05 _usr_sbin_php5-fpm.1005.crash I tried to download the last one anyway, and ran gdb /usr/sbin/php5-fpm /tmp/_usr_sbin_php5-fpm.1005.crash, only to be told that the file is not a core file (its format was not recognized). Here is the server's apc configuration : cat /etc/php5/cli/conf.d/20-apc.ini extension=apc.so apc.shm_size=512M apc.ttl=3600 apc.user_ttl=3600 apc.enable_cli=1 I'm mostly worried about the apc.shm_size… isn't it too high or too low ? I understand it has to do with the size of memory segments. Question(s) What could be the problem ? How can I troubleshoot it (how can I get a valid core file ?) ? System information free total used free shared buffers cached Mem: 5081296 4354684 726612 0 374744 959968 -/+ buffers/cache: 3019972 2061324 Swap: 522236 516888 5348 cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" php -v PHP 5.4.17-1~precise+1 (cli) (built: Jul 17 2013 18:14:06) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies php -i excerpt : Configuration apc APC Support => enabled Version => 3.1.13 APC Debugging => Disabled MMAP Support => Enabled MMAP File Mask => Locking type => pthread mutex Locks Serialization Support => php Revision => $Revision: 327136 $ Build Date => Nov 20 2012 18:41:36 Directive => Local Value => Master Value apc.cache_by_default => On => On apc.canonicalize => On => On apc.coredump_unmap => Off => Off apc.enable_cli => On => On apc.enabled => On => On apc.file_md5 => Off => Off apc.file_update_protection => 2 => 2 apc.filters => no value => no value apc.gc_ttl => 3600 => 3600 apc.include_once_override => Off => Off apc.lazy_classes => Off => Off apc.lazy_functions => Off => Off apc.max_file_size => 1M => 1M apc.mmap_file_mask => no value => no value apc.num_files_hint => 1000 => 1000 apc.preload_path => no value => no value apc.report_autofilter => Off => Off apc.rfc1867 => Off => Off apc.rfc1867_freq => 0 => 0 apc.rfc1867_name => APC_UPLOAD_PROGRESS => APC_UPLOAD_PROGRESS apc.rfc1867_prefix => upload_ => upload_ apc.rfc1867_ttl => 3600 => 3600 apc.serializer => default => default apc.shm_segments => 1 => 1 apc.shm_size => 512M => 512M apc.shm_strings_buffer => 4M => 4M apc.slam_defense => On => On apc.stat => On => On apc.stat_ctime => Off => Off apc.ttl => 3600 => 3600 apc.use_request_time => On => On apc.user_entries_hint => 4096 => 4096 apc.user_ttl => 3600 => 3600 apc.write_lock => On => On php -m [PHP Modules] apc bcmath bz2 calendar Core ctype curl date dba dom ereg exif fileinfo filter ftp gd gettext hash iconv imagick intl json ldap libxml mbstring memcache memcached mhash mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_pgsql pdo_sqlite pgsql Phar posix Reflection session shmop SimpleXML soap sockets SPL sqlite3 standard sysvmsg sysvsem sysvshm tidy tokenizer wddx xml xmlreader xmlwriter zip zlib [Zend Modules] ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 39531 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 39531 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Large concurrent user performance issues for Apache + mod_jk + GlassFish v3.1 clusters

    - by user10035
    I am running a java ee 6 ear application on a GlassFish v3.1 ( 2 clusters with 2 instances each) load balanced by an Apache v2.2 with mod_jk - all on the same server (Windows Server 2003 R2, Intel Xeon CPU x5670 @2.93Ghz, 6GB RAM, 2 cpus). The web application is accessed by around ~100 users. When they all try to access it at the same time every morning ~8am, the response is very slow while trying to access the main jsf home page. Apart from that I have seen the CPU usage spike upto 99% by the httpd process during the day frequently and I start seeing errors in the mod_jk.log file. [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_service::jk_ajp_common.c (2543): (myAppLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) Any suggestions on how I can go about improving this? Apache configuration is mostly the default as shown below ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2" Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule include_module modules/mod_include.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule setenvif_module modules/mod_setenvif.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/" </IfModule> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-mpm.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" JkMount /myApp/* loadbalancerLocal JkMount /myAppRemote/* loadbalancerRemote JkMount /myApp loadbalancerLocal JkMount /myAppRemote loadbalancerRemote The workers.properties config file is: worker.list=loadbalancerLocal,loadbalancerRemote worker.myAppLocalInstance1.type=ajp13 worker.myAppLocalInstance1.host=localhost worker.myAppLocalInstance1.port=8109 worker.myAppLocalInstance1.lbfactor=1 worker.myAppLocalInstance1.socket_keepalive=1 worker.myAppLocalInstance1.socket_timeout=1000 worker.myAppLocalInstance2.type=ajp13 worker.myAppLocalInstance2.host=localhost worker.myAppLocalInstance2.port=8209 worker.myAppLocalInstance2.lbfactor=1 worker.myAppLocalInstance2.socket_keepalive=1 worker.myAppLocalInstance2.socket_timeout=1000 worker.myAppLocalInstance3.type=ajp13 worker.myAppLocalInstance3.host=localhost worker.myAppLocalInstance3.port=8309 worker.myAppLocalInstance3.lbfactor=1 worker.myAppLocalInstance3.socket_keepalive=1 worker.myAppLocalInstance3.socket_timeout=1000 worker.myAppLocalInstance4.type=ajp13 worker.myAppLocalInstance4.host=localhost worker.myAppLocalInstance4.port=8409 worker.myAppLocalInstance4.lbfactor=1 worker.myAppLocalInstance4.socket_keepalive=1 worker.myAppLocalInstance4.socket_timeout=1000 worker.myAppRemoteInstance1.type=ajp13 worker.myAppRemoteInstance1.host=localhost worker.myAppRemoteInstance1.port=8509 worker.myAppRemoteInstance1.lbfactor=1 worker.myAppRemoteInstance1.socket_keepalive=1 worker.myAppRemoteInstance1.socket_timeout=1000 worker.myAppRemoteInstance2.type=ajp13 worker.myAppRemoteInstance2.host=localhost worker.myAppRemoteInstance2.port=8609 worker.myAppRemoteInstance2.lbfactor=1 worker.myAppRemoteInstance2.socket_keepalive=1 worker.myAppRemoteInstance2.socket_timeout=1000 worker.myAppRemoteInstance3.type=ajp13 worker.myAppRemoteInstance3.host=localhost worker.myAppRemoteInstance3.port=8709 worker.myAppRemoteInstance3.lbfactor=1 worker.myAppRemoteInstance3.socket_keepalive=1 worker.myAppRemoteInstance3.socket_timeout=1000 worker.myAppRemoteInstance4.type=ajp13 worker.myAppRemoteInstance4.host=localhost worker.myAppRemoteInstance4.port=8809 worker.myAppRemoteInstance4.lbfactor=1 worker.myAppRemoteInstance4.socket_keepalive=1 worker.myAppRemoteInstance4.socket_timeout=1000 worker.loadbalancerLocal.type=lb worker.loadbalancerLocal.sticky_session=True worker.loadbalancerLocal.balance_workers=myAppLocalInstance1,myAppLocalInstance2,myAppLocalInstance3,myAppLocalInstance4 worker.loadbalancerRemote.type=lb worker.loadbalancerRemote.balance_workers=myAppRemoteInstance1,myAppRemoteInstance2,myAppRemoteInstance3,myAppRemoteInstance4 worker.loadbalancerRemote.sticky_session=True

    Read the article

  • OpenVPN and PPTP on XEN VPS

    - by amiv
    I have Debian based system (Ubuntu 11.10) on XEN VPS. I've installed OpenVPN and works great. I need to install PPTP too, so did it and clients can connect, but they have no internet on client side. If I connect to VPN over PPTP I can ping and access to only my VPS by its IP, but ony that. There's no "internet" on client side. It looks it's not DNS problems (I'm using 8.8.8.8) because I can't ping known IPs. I bet the solution is simple, but don't have any idea. Any guess? /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip 46.38.xx.xx remoteip 10.1.0.1-10 /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 proxyarp nodefaultroute lock nobsdcomp /etc/ppp/ip-up [...] ifconfig ppp0 mtu 1400 /etc/sysctl.conf [...] net.ipv4.ip_forward=1 Command which I run: iptables -t nat -A POSTROUTING -j SNAT --to-source 46.38.xx.xx (IP of my VPS) The client can connect, first one gets IP 10.1.0.1 and DNS from Google. I bet it's iptables problem, am I right? I'm iptables noob and I don't have idea what's wrong. And here's the ifconfig and route command before client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22671 errors:0 dropped:81 overruns:0 frame:0 TX packets:2266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1813358 (1.8 MB) TX bytes:667626 (667.6 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:100 errors:0 dropped:0 overruns:0 frame:0 TX packets:100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10778 (10.7 KB) TX bytes:10778 (10.7 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And here's the ifconfig and route command after client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.1.0.1 * 255.255.255.255 UH 0 0 0 ppp0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22989 errors:0 dropped:82 overruns:0 frame:0 TX packets:2352 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1841310 (1.8 MB) TX bytes:678456 (678.4 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12102 (12.1 KB) TX bytes:12102 (12.1 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:46.38.xx.xx P-t-P:10.1.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:66 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:10028 (10.0 KB) TX bytes:660 (660.0 B) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And ugly iptables --list output: root@vps3780:~# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- 10.1.0.0/24 anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.1.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable And ugly iptables -t nat -L output: root@vps3780:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- 10.1.0.0/24 anywhere SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere SNAT all -- anywhere anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere As I said - OpenVPN works very good. 10.8.0.0/24 for OpenVPN (on tun0). PPTP won't work. 10.1.0.0/24 for PPTP (on ppp0). Clients can connect, but they haven't "internet". Any suggestions will be appreciated. Second whole day fighting with no results. EDIT: iptables -t filter -F - it resolved my problem :-)

    Read the article

  • KB2667402 update fails to install with 0x80004005. Yet it's also showing as installed

    - by growse
    I've got 15 Windows 2008 R2 x64 servers that I manage with SCCM2012. I've noticed during my Windows updates reporting that there's two boxes that are showing as 'error' for total updates installed. Digging around, it looks like the update that is failing to install is KB2667402. The Software Centre on the server itself shows the following: The software change returned error code 0x80004005(-2147467259). So SCCM thinks it hasn't installed the update. However, if I go to the Programs and Features application and select 'Windows Updates', I can see an entry for KB2667402: If I try and uninstall this, I get an error: An error occurred. Not all of the updates were successfully uninstalled If I try and download the patch from Microsoft directly, I get the same error installing as displayed in Software Centre. The only odd thing about this setup that I can think would affect this is that I run the RDP service on a non-standard port. However, I do this across all the servers, so it seems odd that it would fail on just 2 out of 15. The tail of the WindowsUpdate.log file is below: 2012-06-26 15:33:53:184 3924 1608 COMAPI ------------- 2012-06-26 15:33:53:190 3924 1608 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:190 3924 1608 COMAPI --------- 2012-06-26 15:33:53:190 3924 1608 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes 2012-06-26 15:33:53:190 3924 1608 COMAPI - Updates in request: 1 2012-06-26 15:33:53:190 3924 1608 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:53:199 860 1198 Agent ************* 2012-06-26 15:33:53:199 860 1198 Agent ** START ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:53:199 860 1198 Agent ********* 2012-06-26 15:33:53:199 860 1198 Agent * Updates to install = 1 2012-06-26 15:33:53:201 860 1198 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2667402) 2012-06-26 15:33:53:201 860 1198 Agent * UpdateId = {48859BE4-1331-4CD2-8E70-3B537180A0D0}.103 2012-06-26 15:33:53:201 860 1198 Agent * Bundles 1 updates: 2012-06-26 15:33:53:201 860 1198 Agent * {D854ECF1-99A7-4D67-B435-2D041BF79565}.103 2012-06-26 15:33:53:204 3924 1608 COMAPI - Updates to install = 1 2012-06-26 15:33:53:204 3924 1608 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:53:221 860 1198 Agent WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point 2012-06-26 15:33:53:222 860 1198 Agent WARNING: LoadLibrary failed for srclient.dll with hr:8007007e 2012-06-26 15:33:53:322 860 1198 DnldMgr Preparing update for install, updateId = {D854ECF1-99A7-4D67-B435-2D041BF79565}.103. 2012-06-26 15:33:53:325 5700 117c Misc =========== Logging initialized (build: 7.5.7601.17514, tz: +0100) =========== 2012-06-26 15:33:53:325 5700 117c Misc = Process: C:\Windows\system32\wuauclt.exe 2012-06-26 15:33:53:325 5700 117c Misc = Module: C:\Windows\system32\wuaueng.dll 2012-06-26 15:33:53:324 5700 117c Handler ::::::::::::: 2012-06-26 15:33:53:325 5700 117c Handler :: START :: Handler: CBS Install 2012-06-26 15:33:53:325 5700 117c Handler ::::::::: 2012-06-26 15:33:53:330 5700 117c Handler Starting install of CBS update D854ECF1-99A7-4D67-B435-2D041BF79565 2012-06-26 15:33:53:342 5700 117c Handler CBS package identity: Package_for_KB2667402~31bf3856ad364e35~amd64~~6.1.2.0 2012-06-26 15:33:53:366 5700 117c Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\windows6.1-kb2667402-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\44059e0415033d6f699a50ef69dd5ff2\inst 2012-06-26 15:33:56:270 5700 3b8 Handler FATAL: CBS called Error with 0x80004005, 2012-06-26 15:33:56:402 5700 117c Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80004005 2012-06-26 15:33:56:405 5700 117c Handler ::::::::: 2012-06-26 15:33:56:406 5700 117c Handler :: END :: Handler: CBS Install 2012-06-26 15:33:56:406 5700 117c Handler ::::::::::::: 2012-06-26 15:33:56:433 860 1198 Agent ********* 2012-06-26 15:33:56:433 860 1198 Agent ** END ** Agent: Installing updates [CallerId = CcmExec] 2012-06-26 15:33:56:433 860 1198 Agent ************* 2012-06-26 15:33:56:433 860 d14 AU Can not perform non-interactive scan if AU is interactive-only 2012-06-26 15:33:56:450 3924 e40 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:450 3924 e40 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2012-06-26 15:33:56:450 3924 e40 COMAPI - Reboot required = No 2012-06-26 15:33:56:450 3924 e40 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2012-06-26 15:33:56:451 3924 e40 COMAPI --------- 2012-06-26 15:33:56:451 3924 e40 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec] 2012-06-26 15:33:56:451 3924 e40 COMAPI ------------- 2012-06-26 15:33:56:536 860 13a4 AU Triggering Offline detection (non-interactive) 2012-06-26 15:33:56:536 860 d14 AU ############# 2012-06-26 15:33:56:536 860 d14 AU ## START ## AU: Search for updates 2012-06-26 15:33:56:536 860 d14 AU ######### 2012-06-26 15:33:56:539 860 d14 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:56:539 860 1788 Agent ************* 2012-06-26 15:33:56:539 860 1788 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:56:539 860 1788 Agent ********* 2012-06-26 15:33:56:539 860 1788 Agent * Online = No; Ignore download priority = No 2012-06-26 15:33:56:539 860 1788 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2012-06-26 15:33:56:539 860 1788 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed 2012-06-26 15:33:56:539 860 1788 Agent * Search Scope = {Machine} 2012-06-26 15:33:58:562 860 1788 Agent * Found 0 updates and 70 categories in search; evaluated appl. rules of 180 out of 1072 deployed entities 2012-06-26 15:33:58:565 860 1788 Agent ********* 2012-06-26 15:33:58:565 860 1788 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2012-06-26 15:33:58:565 860 1788 Agent ************* 2012-06-26 15:33:58:650 860 f2c AU >>## RESUMED ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU # 0 updates detected 2012-06-26 15:33:58:650 860 f2c AU ######### 2012-06-26 15:33:58:650 860 f2c AU ## END ## AU: Search for updates [CallId = {2DBB046C-2265-421B-A37B-93BDECC6C261}] 2012-06-26 15:33:58:650 860 f2c AU ############# 2012-06-26 15:33:58:650 860 f2c AU Featured notifications is disabled. 2012-06-26 15:33:58:651 860 f2c AU Successfully wrote event for AU health state:0 2012-06-26 15:33:58:652 860 f2c AU Successfully wrote event for AU health state:0

    Read the article

  • Log4Net with ASP.NET MVC...nothing happens...

    - by twal
    I am trying to use log4Net with Asp.net MVC and I cannot get anything to happen with it. i created a config that is in my web project root. Here is that config file. <log4net> <root> <level value="INFO" /> <appender-ref ref="RollingLogFileAppender"/> </root> <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="C:\DWSApplicationFiles\AppLogs\app.log" /> <appendToFile value="true" /> <rollingStyle value="Size" /> <maxSizeRollBackups value="10" /> <maximumFileSize value="100KB" /> <staticLogFileName value="true" /> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t]%-5p %c [%x] - %m%n" /> </layout> </appender> <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="C:\DWSApplicationFiles\AppLogs\app.log" /> <appendToFile value="false" /> <datePattern value="-dddd" /> <rollingStyle value="Date" /> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%d [%t]%-5p %c [%x] - %m%n" /> </layout> </appender> </log4net> Before I am asked, yes the application has permissions to write to the directory. I use have tested this and the application has permissions to this directoy. here is where I am trying to use log4net. public class HomeController : Controller { readonly log4net.ILog log = log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType); public ActionResult Index() { log.Error("In Index "); return View(); } } when I run the appliction and go to this controller. Log4net does nothing. it doesn't create the files in that directory or anything. I have enabled internal debugging for lognet and I get no output errors in the console. This is all i see from log4net log4net: log4net assembly [log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=1b44e1d426115821]. Loaded from [C:\Users\twaldron.BULLFROGSPAS\AppData\Local\Temp\Temporary ASP.NET Files\root\7642c99a\60feb7f2\assembly\dl3\17247033\008dfd6d_e2d0ca01\log4net.DLL]. (.NET Runtime [2.0.50727.4952] on Microsoft Windows NT 6.1.7600.0) log4net: DefaultRepositorySelector: defaultRepositoryType [log4net.Repository.Hierarchy.Hierarchy] log4net: DefaultRepositorySelector: Creating repository for assembly [Bullfrog.DWS.Web, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null] log4net: DefaultRepositorySelector: Assembly [Bullfrog.DWS.Web, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null] Loaded From [C:\Users\twaldron.BULLFROGSPAS\AppData\Local\Temp\Temporary ASP.NET Files\root\7642c99a\60feb7f2\assembly\dl3\2960c79f\b876bb2d_aca7cb01\Bullfrog.DWS.Web.DLL] log4net: DefaultRepositorySelector: Assembly [Bullfrog.DWS.Web, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null] does not have a RepositoryAttribute specified. log4net: DefaultRepositorySelector: Assembly [Bullfrog.DWS.Web, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null] using repository [log4net-default-repository] and repository type [log4net.Repository.Hierarchy.Hierarchy] log4net: DefaultRepositorySelector: Creating repository [log4net-default-repository] using type [log4net.Repository.Hierarchy.Hierarchy] 'WebDev.WebServer20.EXE' (Managed (v2.0.50727)): Loaded 'Anonymously Hosted DynamicMethods Assembly'

    Read the article

  • WCF Data Service BeginSaveChanges not saving changes in Silverlight app

    - by Enigmativity
    I'm having a hell of a time getting WCF Data Services to work within Silverlight. I'm using the VS2010 RC. I've struggled with the cross domain issue requiring the use of clientaccesspolicy.xml & crossdomain.xml files in the web server root folder, but I just couldn't get this to work. I've resorted to putting both the Silverlight Web App & the WCF Data Service in the same project to get past this issue, but any advice here would be good. But now that I can actually see my data coming from the database and being displayed in a data grid within Silverlight I thought my troubles were over - but no. I can edit the data and the in-memory entity is changing, but when I call BeginSaveChanges (with the appropriate async EndSaveChangescall) I get no errors, but no data updates in the database. Here's my WCF Data Services code: public class MyDataService : DataService<MyEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("*", EntitySetRights.All); config.SetServiceOperationAccessRule("*", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } protected override void OnStartProcessingRequest(ProcessRequestArgs args) { base.OnStartProcessingRequest(args); HttpContext context = HttpContext.Current; HttpCachePolicy c = HttpContext.Current.Response.Cache; c.SetCacheability(HttpCacheability.ServerAndPrivate); c.SetExpires(HttpContext.Current.Timestamp.AddSeconds(60)); c.VaryByHeaders["Accept"] = true; c.VaryByHeaders["Accept-Charset"] = true; c.VaryByHeaders["Accept-Encoding"] = true; c.VaryByParams["*"] = true; } } I've pinched the OnStartProcessingRequest code from Scott Hanselman's article Creating an OData API for StackOverflow including XML and JSON in 30 minutes. Here's my code from my Silverlight app: private MyEntities _wcfDataServicesEntities; private CollectionViewSource _customersViewSource; private ObservableCollection<Customer> _customers; private void UserControl_Loaded(object sender, RoutedEventArgs e) { if (!System.ComponentModel.DesignerProperties.GetIsInDesignMode(this)) { _wcfDataServicesEntities = new MyEntities(new Uri("http://localhost:7156/MyDataService.svc/")); _customersViewSource = this.Resources["customersViewSource"] as CollectionViewSource; DataServiceQuery<Customer> query = _wcfDataServicesEntities.Customer; query.BeginExecute(result => { _customers = new ObservableCollection<Customer>(); Array.ForEach(query.EndExecute(result).ToArray(), _customers.Add); Dispatcher.BeginInvoke(() => { _customersViewSource.Source = _customers; }); }, null); } } private void button1_Click(object sender, RoutedEventArgs e) { _wcfDataServicesEntities.BeginSaveChanges(r => { var response = _wcfDataServicesEntities.EndSaveChanges(r); string[] results = new[] { response.BatchStatusCode.ToString(), response.IsBatchResponse.ToString() }; _customers[0].FinAssistCompanyName = String.Join("|", results); }, null); } The response string I get back data binds to my grid OK and shows "-1|False". My intent is to get a proof-of-concept working here and then do the appropriate separation of concerns to turn this into a simple line-of-business app. I've spent hours and hours on this. I'm being driven insane. Any ideas how to get this working?

    Read the article

  • Debugging matchit plugin in vim (under Cygwin)

    - by system PAUSE
    The "matchit" plugin for vim is supposed to allow you to use the % key to jump between matching start/end tags when editing HTML, as well as /* and */ comment delimiters when editing other kinds of code. I've followed the exact instructions in ":help matchit", but % still doesn't work for me. It seems silly to ask "Why doesn't this work?" so instead I'm asking How can I diagnose the problem? Pointers to references are welcome, but specific vim-plugin-debugging techniques are preferred. Here is the ~/.vim directory: $ ls -ltaGR ~/.vim /cygdrive/y/.vim: total 0 drwxr-xr-x 1 spause 0 Sep 17 13:20 .. drwxr-xr-x 1 spause 0 Sep 16 13:59 doc drwxr-xr-x 1 spause 0 Sep 16 13:58 . drwxr-xr-x 1 spause 0 Sep 16 13:58 plugin /cygdrive/y/.vim/doc: total 24 -rw-r--r-- 1 spause 1961 Sep 16 13:59 tags drwxr-xr-x 1 spause 0 Sep 16 13:59 . -rw-r--r-- 1 spause 19303 Sep 16 13:58 matchit.txt drwxr-xr-x 1 spause 0 Sep 16 13:58 .. /cygdrive/y/.vim/plugin: total 32 drwxr-xr-x 1 spause 0 Sep 16 13:58 .. -rw-r--r-- 1 spause 30714 Sep 16 13:58 matchit.vim drwxr-xr-x 1 spause 0 Sep 16 13:58 . I am running vim 7.2 under Cygwin (installed Fall 2008). cygcheck shows: 1829k 2008/06/12 C:\cygwin\bin\cygwin1.dll Cygwin DLL version info: DLL version: 1.5.25 DLL epoch: 19 DLL bad signal mask: 19005 DLL old termios: 5 DLL malloc env: 28 API major: 0 API minor: 156 Shared data: 4 DLL identifier: cygwin1 Mount registry: 2 Cygnus registry name: Cygnus Solutions Cygwin registry name: Cygwin Program options name: Program Options Cygwin mount registry name: mounts v2 Cygdrive flags: cygdrive flags Cygdrive prefix: cygdrive prefix Cygdrive default prefix: Build date: Thu Jun 12 19:34:46 CEST 2008 CVS tag: cr-0x5f1 Shared id: cygwin1S4 In vim, :set shows: --- Options --- autoindent fileformat=dos shiftwidth=3 background=dark filetype=html syntax=html cedit=^F scroll=24 tabstop=3 expandtab shelltemp textmode viminfo='20,<50,s10,h Notably, the syntax and filetype are both recognized as HTML. (The syntax colouring is just fine.) If additional info is needed, please comment. UPDATE: Per answer by too much php: After trying vim -V1, I had changed my .vimrc to include a line set nocp so the compatible option is not on. :let loadad_matchit loaded_matchit #1 :set runtimepath? runtimepath=~/.vim,/usr/share/vim/vimfiles,/usr/share/vim/vim72,/usr/share/vim/vimfiles/after,~/.vim/after (~ is /cygdrive/y) Per answer by michael: :scriptnames 1: /cygdrive/y/.vimrc 2: /usr/share/vim/vim72/syntax/syntax.vim 3: /usr/share/vim/vim72/syntax/synload.vim 4: /usr/share/vim/vim72/syntax/syncolor.vim 5: /usr/share/vim/vim72/filetype.vim 6: /usr/share/vim/vim72/colors/evening.vim 7: /cygdrive/y/.vim/plugin/matchit.vim 8: /cygdrive/y/.vim/plugin/python_match.vim 9: /usr/share/vim/vim72/plugin/getscriptPlugin.vim 10: /usr/share/vim/vim72/plugin/gzip.vim 11: /usr/share/vim/vim72/plugin/matchparen.vim 12: /usr/share/vim/vim72/plugin/netrwPlugin.vim 13: /usr/share/vim/vim72/plugin/rrhelper.vim 14: /usr/share/vim/vim72/plugin/spellfile.vim 15: /usr/share/vim/vim72/plugin/tarPlugin.vim 16: /usr/share/vim/vim72/plugin/tohtml.vim 17: /usr/share/vim/vim72/plugin/vimballPlugin.vim 18: /usr/share/vim/vim72/plugin/zipPlugin.vim 19: /usr/share/vim/vim72/syntax/html.vim 20: /usr/share/vim/vim72/syntax/javascript.vim 21: /usr/share/vim/vim72/syntax/vb.vim 22: /usr/share/vim/vim72/syntax/css.vim Note that matchit.vim, html.vim, tohtml.vim, css.vim, and javascript.vim are all present. :echo b:match_words E121: Undefined variable: b:match_words E15: Invalid expression: b:match_words Hm, this looks highly relevant. I'm now looking through :help matchit-debug to find out how to fix b:match_words.

    Read the article

  • WCF app Deployed on Win7 Machine and get connection refused error

    - by Belliez
    I have created a Sync Framework application based on the following sample from microsoft and deployed it to a new Windows 7 machine for testing. The app runs ok but when I attempt to communicate I get the following error: Could not connect to http://localhost:8000/RelationalSyncContract/SqlSyncService/. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8000. I am wondering if there is something I am missing. This is my first experience using WCF and followed microsoft sample code. I have disabled the firewall and opened port 8000 for both TCP and UDP. Not sure what to look at next. Below is my App.config file if this helps: <?xml version="1.0"?> <configuration> <system.web> <compilation debug="true"/> <httpRuntime maxRequestLength="32768" /> </system.web> <!-- When deploying the service library project, the content of the config file must be added to the host's app.config file. System.Configuration does not support config files for libraries. --> <system.serviceModel> <services> <service behaviorConfiguration="WebSyncContract.SyncServiceBehavior" name="WebSyncContract.SqlWebSyncService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="largeMessageHttpBinding" contract="WebSyncContract.ISqlSyncContract"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="http://localhost:8000/RelationalSyncContract/SqlSyncService/"/> </baseAddresses> </host> </service> </services> <bindings> <wsHttpBinding> <!-- We are using Server cert only.--> <binding name="largeMessageHttpBinding" maxReceivedMessageSize="204857600"> <readerQuotas maxArrayLength="1000000"/> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WebSyncContract.SyncServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="True"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="True"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> <startup><supportedRuntime version="v2.0.50727"/></startup></configuration> Thank you, your help is much appreciated.

    Read the article

  • How do I use C# and ADO.NET to query an Oracle table with a spatial column of type SDO_GEOMETRY?

    - by John Donahue
    My development machine is running Windows 7 Enterprise, 64-bit version. I am using Visual Studio 2010 Release Candidate. I am connecting to an Oracle 11g Enterprise server version 11.1.0.7.0. I had a difficult time locating Oracle client software that is made for 64-bit Windows systems and eventually landed here to download what I assume is the proper client connectivity software. I added a reference to "Oracle.DataAccess" which is version 2.111.6.0 (Runtime Version is v2.0.50727). I am targeting .NET CLR version 4.0 since all properties of my VS Solution are defaults and this is 2010 RC. I was then able to write a console application in C# that established connectivity, executed a SELECT statement, and properly returned data when the table in question does NOT contain a spatial column. My problem is that this no longer works when the table I query has a column of type SDO_GEOMETRY in it. Below is the simple console application I am trying to run that reproduces the problem. When the code gets to the line with the "ExecuteReader" command, an exception is raised and the message is "Unsupported column datatype". using System; using System.Data; using Oracle.DataAccess.Client; namespace ConsoleTestOracle { class Program { static void Main(string[] args) { string oradb = string.Format("Data Source={0};User Id={1};Password={2};", "hostname/servicename", "login", "password"); try { using (OracleConnection conn = new OracleConnection(oradb)) { conn.Open(); OracleCommand cmd = new OracleCommand(); cmd.Connection = conn; cmd.CommandText = "select * from SDO_8307_2D_POINTS"; cmd.CommandType = CommandType.Text; OracleDataReader dr = cmd.ExecuteReader(); } } catch (Exception e) { string error = e.Message; } } } } The fact that this code works when used against a table that does not contain a spatial column of type SDO_GEOMETRY makes me think I have my windows 7 machine properly configured so I am surprised that I get this exception when the table contains different kinds of columns. I don't know if there is some configuration on my machine or the Oracle machine that needs to be done, or if the Oracle client software I have installed is wrong, or old and needs to be updated. Here is the SQL I used to create the table, populate it with some rows containing points in the spatial column, etc. if you want to try to reproduce this exactly. SQL Create Commands: create table SDO_8307_2D_Points (ObjectID number(38) not null unique, TestID number, shape SDO_GEOMETRY); Insert into SDO_8307_2D_Points values (1, 1, SDO_GEOMETRY(2001, 8307, null, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY(10.0, 10.0))); Insert into SDO_8307_2D_Points values (2, 2, SDO_GEOMETRY(2001, 8307, null, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY(10.0, 20.0))); insert into user_sdo_geom_metadata values ('SDO_8307_2D_Points', 'SHAPE', SDO_DIM_ARRAY(SDO_DIM_ELEMENT('Lat', -180, 180, 0.05), SDO_DIM_ELEMENT('Long', -90, 90, 0.05)), 8307); create index SDO_8307_2D_Point_indx on SDO_8307_2D_Points(shape) indextype is mdsys.spatial_index PARAMETERS ('sdo_indx_dims=2' ); Any advice or insights would be greatly appreciated. Thank you.

    Read the article

  • PWC1406: Servlet.service() threw exception java.io.IOException: Invalid chunk header When client se

    - by Nivek
    I am developing an application using J2ME to send the GPS coordinates received to the server and i am new to developing client server application. Everything works fine with the use of Nokia N97mini or E71. But when i tried it on HTC HD2, i get the exception from the server. I am using Netbeans 6.5.1 GlassFish V2 as Server. I have no idea why this error occurs only on the HTC HD2. Any help will be greatly appreciated. Thanks... Below is the error message: StandardWrapperValve[FindHospitalServlet]: PWC1406: Servlet.service() for servlet FindHospitalServlet threw exception java.io.IOException: Invalid chunk header at org.apache.coyote.http11.filters.ChunkedInputFilter.doRead(ChunkedInputFilter.java:171) at org.apache.coyote.http11.InternalInputBuffer.doRead(InternalInputBuffer.java:719) at org.apache.coyote.Request.doRead(Request.java:482) at org.apache.coyote.tomcat5.InputBuffer.realReadBytes(InputBuffer.java:342) at org.apache.tomcat.util.buf.ByteChunk.substract(ByteChunk.java:378) at org.apache.coyote.tomcat5.InputBuffer.readByte(InputBuffer.java:351) at org.apache.coyote.tomcat5.CoyoteInputStream.read(CoyoteInputStream.java:159) at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:320) at java.io.DataInputStream.readUTF(DataInputStream.java:572) at java.io.DataInputStream.readUTF(DataInputStream.java:547) at myPackage.FindHospitalServlet.doPost(FindHospitalServlet.java:28) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94) at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1096) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1096) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:288) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:647) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:579) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:831) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214) at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265) at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106) Below is the code that i wrote to connect to the server: private void connectFindHospServlet() { String url = "http://172.22.190.13:8080/UpdateServlet/FindHospitalServlet"; StringBuffer sb = new StringBuffer(); String info = lat+"!"+lng+"!"; try { HttpConnection c = (HttpConnection) Connector.open(url); c.setRequestProperty("User-Agent","Profile/MIDP-2.0, Configuration/CLDC-1.0"); c.setRequestProperty("Content-Language","en-US"); c.setRequestMethod(HttpConnection.POST); DataOutputStream os = (DataOutputStream)c.openDataOutputStream(); os.writeUTF(info); os.flush(); os.close(); // Get the response from the servlet page. DataInputStream is =(DataInputStream)c.openDataInputStream(); int ch; sb = new StringBuffer(); while ((ch = is.read()) != -1) sb.append((char)ch); is.close(); c.close(); if(sb.toString().charAt(0) == 'n') { formDisplayResultFindHosp(); display.setCurrent(formDisplayResultFindHosp); } else { PlannerMain pm = new PlannerMain(); hospInfo = pm.getFindHospInfo(sb.toString().substring(0, sb.length()-2)); formDisplayResultFindHosp(hospInfo); display.setCurrent(formDisplayResultFindHosp); } } catch (Exception e) { System.out.println("Error recieve find user"); } } Any information needed to better help in understanding the problem, do let me know. I will try to provide as much as possible.

    Read the article

  • Functions registered with ExternalInterface.addCallback not available in Javascript

    - by Selene
    I'm working on a Flash game that needs to call some Javascript on the page and get data back from it. Calling Javascript from Flash works. Calling the Flash functions from Javascript (often) doesn't. I'm using the Gaia framework. What happens: The swf is loaded in with SWFObject There's a button in the Flash file. On click, it uses ExternalInterface.call() to call a Javascript function. This works. The Javascript function calls a Flash function that was exposed with ExternalInterface.addCallback(). Sometimes, the Javascript produces the following error: TypeError: myFlash.testCallback is not a function. When the error happens, it affects all functions registered with addCallback(). Gaia and some of its included libraries use addCallback(), and calling those functions from Javascript also produces the TypeError. Waiting a long time before pressing the button in Flash doesn't solve the error. Having Flash re-try addCallback() periodically doesn't solve the error When the error occurs, ExternalInterface.available = true and ExternalInterface.objectID contains the correct name for the Flash embed object. When the error occurs, document.getElementById('myflashcontent') correctly returns the Flash embed object. From my Page class: public class MyPage extends AbstractPage { // declarations of stage instances and class variables // other functions override public function transitionIn():void { send_button.addEventListener(MouseEvent.MOUSE_UP, callJS); exposeCallbacks(); super.transitionIn(); } private function exposeCallbacks():void { trace("exposeCallbacks()"); if (ExternalInterface.available) { trace("ExternalInterface.objectID: " + ExternalInterface.objectID); try { ExternalInterface.addCallback("testCallback", simpleTestCallback); trace("called ExternalInterface.addCallback"); } catch (error:SecurityError) { trace("A SecurityError occurred: " + error.message + "\n"); } catch (error:Error) { trace("An Error occurred: " + error.message + "\n"); } } else { trace("exposeCallbacks() - ExternalInterface not available"); } } private function simpleTestCallback(str:String):void { trace("simpleTestCallback(str=\"" + str + "\")"); } private function callJS(e:Event):void { if (ExternalInterface.available) { ExternalInterface.call("sendTest", "name", "url"); } else { trace("callJS() - ExternalInterface not available"); } } } My Javascript: function sendTest(text, url) { var myFlash = document.getElementById("myflashcontent"); var callbackStatus = ""; callbackStatus += '\nmyFlash[testCallback]: ' + myFlash['testCallback']; //console.log(callbackStatus); var errors = false; try { myFlash.testCallback("test string"); } catch (err) { alert("Error: " + err.toString()); error = true; } if (!error) { alert("Success"); } } var params = { quality: "high", scale: "noscale", wmode: "transparent", allowscriptaccess: "always", bgcolor: "#000000" }; var flashVars = { siteXML: "xml/site.xml" }; var attributes = { id: "myflashcontent", name: "myflashcontent" }; // load the flash movie. swfobject.embedSWF("http://myurl.com/main.swf?v2", "myflashcontent", "728", "676", "10.0.0", serverRoot + "expressInstall.swf", flashVars, params, attributes, function(returnObj) { console.log('Returned ' + returnObj.success); if (returnObj.success) { returnObj.ref.focus(); } });

    Read the article

  • How to install PyQt on Mac OS X 10.6.

    - by Jebagnanadas
    Hello all, I'm quite new to Mac OS X. when i tried to install PyQt on Mac Os X after installing python 3.1, Qt 4.6.2 and SIP 4.10.1 i encounter the following error when i execute $python3 configure.py command. Determining the layout of your Qt installation... This is the GPL version of PyQt 4.7 (licensed under the GNU General Public License) for Python 3.1 on darwin. Type '2' to view the GPL v2 license. Type '3' to view the GPL v3 license. Type 'yes' to accept the terms of the license. Type 'no' to decline the terms of the license. Do you accept the terms of the license? yes Checking to see if the QtGui module should be built... Checking to see if the QtHelp module should be built... Checking to see if the QtMultimedia module should be built... Checking to see if the QtNetwork module should be built... Checking to see if the QtOpenGL module should be built... Checking to see if the QtScript module should be built... Checking to see if the QtScriptTools module should be built... Checking to see if the QtSql module should be built... Checking to see if the QtSvg module should be built... Checking to see if the QtTest module should be built... Checking to see if the QtWebKit module should be built... Checking to see if the QtXml module should be built... Checking to see if the QtXmlPatterns module should be built... Checking to see if the phonon module should be built... Checking to see if the QtAssistant module should be built... Checking to see if the QtDesigner module should be built... Qt v4.6.2 free edition is being used. Qt is built as a framework. SIP 4.10.1 is being used. The Qt header files are in /usr/include. The shared Qt libraries are in /Library/Frameworks. The Qt binaries are in /Developer/Tools/Qt. The Qt mkspecs directory is in /usr/local/Qt4.6. These PyQt modules will be built: QtCore. The PyQt Python package will be installed in /Library/Frameworks/Python.framework/Versions/3.1/lib/python3.1/site-packages. PyQt is being built with generated docstrings. PyQt is being built with 'protected' redefined as 'public'. The Designer plugin will be installed in /Developer/Applications/Qt/plugins/designer. The PyQt .sip files will be installed in /Library/Frameworks/Python.framework/Versions/3.1/share/sip/PyQt4. pyuic4, pyrcc4 and pylupdate4 will be installed in /Library/Frameworks/Python.framework/Versions/3.1/bin. Generating the C++ source for the QtCore module... sip: Usage: sip [-h] [-V] [-a file] [-b file] [-c dir] [-d file] [-e] [-g] [-I dir] [-j #] [-k] [-m file] [-o] [-p module] [-r] [-s suffix] [-t tag] [-w] [-x feature] [-z file] [file] Error: Unable to create the C++ code. Anybody here installed PyQt on Mac OS X 10.6.2 successfully.. Any help would be much appreciated.. Thanks in advance..

    Read the article

  • Mobile App Data Syncronization

    - by Matt Rogish
    Let's say I have a mobile app that uses HTML5 SQLite DB (and/or the HTML5 key-value store). Assets (media files, PDFs, etc.) are stored locally on the mobile device. Luckily enough, the mobile device is a read-only copy of the "centralized" storage, so the mobile device won't have to propagate changes upstream. However, as the server changes assets (creates new ones, modifies existing, deletes old ones) I need to propagate those changes back to the mobile app. Assume that server changes are grouped into changesets (version number n) that contain some information (added element XYZ, deleted id = 45, etc.) and that the mobile device has limited CPU/bandwidth, so most of the processing has to take place on the server. I can think of a couple of methods to do this. All have trade-offs and at this point, I'm unsure which is the right course of action... Method 1: For change set n, store the "diff" of the current n and previous n-1. When a client with version y asks if there have been any changes, send the change sets from version y up to the current version. e.g. added item 334, contents: xxx. Deleted picture 44. Deleted PDF 11. Changed 33. added picture 99. Characteristics: Diffs take up space, although in theory would be kept small. However, all diffs must be kept around indefinitely (should a v1 app have not been updated for a year, must apply v2..v100). High latency devices (mobile apps) will incur a penalty to send lots of small files (assume cannot be zipped or tarr'd up into one file) Very few server CPU resources required, as all it does is send the client a list of files "Dumb" - if I change an item in change set 3, and change it to something else in 4, the client is going to perform both actions, even though #3 is rendered moot by #4. Or, if an asset is added in #4 and removed in #5 - the client will download a file just to delete it later. Method 2: Very similar to method 1 except on the server, do some sort of a diff between the change sets represented by the app version and server version. Package that up and send that single change set to the client. Characteristics: Client-efficient: The client only has to process one file, duplicate or irrelevant changes are stripped out. Server CPU/space intensive. The change sets must be diff'd and then written out to a file that is then sent to the client. Makes diff server scalability an issue. Possibly ways to cache the results and re-use them, but in the wild there's likely to be a lot of different versions so the diff re-use has a limit Diff algorithm is complicated. The change sets must be structured in such a way that an efficient and effective diff can be performed. Method 3: Instead of keeping diffs, write out the entire versioned asset collection to a mobile-database import file. When client requests an update, send the entire database to client and have them update their assets appropriately. Characteristics: Conceptually simple -- easy to develop and deploy Very inefficient as the client database is restored every update. If only one new thing was added, the whole database is refreshed. Server space and CPU efficient. Only the latest version DB needs kept around and the server just throws the file to the client. Others?? Thoughts? Thanks!!

    Read the article

  • jaas authentication using jetty and gwt

    - by dubreakkk
    Hello, I am trying to use JAAS to authenticate my users. My project is in GWT v2, which runs jetty. I use eclipse for development. From http://code.google.com/p/google-web-toolkit/issues/detail?id=4462 I found out that jetty doesn't like any realm definitions in web.xml, so I moved them to jetty-web.xml. I keep getting ClassNotFound exceptions so I followed the advice here: communitymapbuilder.org/display/JETTY/Problems+with+JAAS+in+Jetty+6.0.0 However, I am still getting ClassNotFoundExceptionsHere in my jetty-web.xml file. How do I configure jetty to work jaas in GWT projects? My jetty-web.xml file: <Configure class="org.mortbay.jetty.webapp.WebAppContext"> <Set name="serverClasses"> <Array type="java.lang.String"> <Item>-org.mortbay.jetty.plus.jaas.</Item> <Item>org.mortbay.jetty</Item> <Item>org.slf4j.</Item> </Array> </Set> <Get name="securityHandler"> <Set name="userRealm"> <New class="org.mortbay.jetty.plus.jaas.JAASUserRealm"> <Set name="name">xyzrealm</Set> <Set name="LoginModuleName">xyz</Set> <Set name="config"><SystemProperty name="jetty.home" default="."/>/WEB-INF/classes/jdbcRealm.properties</Set> </New> </Set> <Set name="authenticator"> <New class="org.mortbay.jetty.security.FormAuthenticator"> <Set name="loginPage">/login.jsp</Set> <Set name="errorPage">/error.jsp</Set> </New> </Set> </Get> Error I am receiving: [WARN] Failed startup of context com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload@1fcef4f7{/,/home/dev/workspace/project/war} java.lang.ClassNotFoundException: org.mortbay.jetty.plus.jaas.JAASUserRealm at java.lang.ClassLoader.findClass(ClassLoader.java:359) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:352) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:337) at org.mortbay.util.Loader.loadClass(Loader.java:91) at org.mortbay.xml.XmlConfiguration.nodeClass(XmlConfiguration.java:216) at org.mortbay.xml.XmlConfiguration.newObj(XmlConfiguration.java:564) at org.mortbay.xml.XmlConfiguration.itemValue(XmlConfiguration.java:907) at org.mortbay.xml.XmlConfiguration.value(XmlConfiguration.java:829) at org.mortbay.xml.XmlConfiguration.set(XmlConfiguration.java:278) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:240) at org.mortbay.xml.XmlConfiguration.get(XmlConfiguration.java:460) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:246) at org.mortbay.xml.XmlConfiguration.configure(XmlConfiguration.java:182) at org.mortbay.jetty.webapp.JettyWebXmlConfiguration.configureWebApp(JettyWebXmlConfiguration.java:109) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1217) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:513) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448) at com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload.doStart(JettyLauncher.java:447) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.handler.RequestLogHandler.doStart(RequestLogHandler.java:115) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:39) at com.google.gwt.dev.shell.jetty.JettyLauncher.start(JettyLauncher.java:543) at com.google.gwt.dev.DevMode.doStartUpServer(DevMode.java:421) at com.google.gwt.dev.DevModeBase.startUp(DevModeBase.java:1035) at com.google.gwt.dev.DevModeBase.run(DevModeBase.java:783) at com.google.gwt.dev.DevMode.main(DevMode.java:275)

    Read the article

  • .NET Exception error, what does this error means?

    - by gsvirdi
    I've tried to develop a simple winform utility which is using xml file as its database. I've used VS 2008 express edition, C#. When this utility tries to write into the xml file then this error is displayed on other computer. I've tried to provide System.Xml.dll & System.Xml.Linq.dll in the same folder on the other computer but no use. What does it means? Any solution? See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.MissingMethodException: Method not found: 'Void System.Xml.XmlReaderSettings.set_MaxCharactersFromEntities(Int64)'. at System.Xml.Linq.XNode.GetXmlReaderSettings(LoadOptions o) at System.Xml.Linq.XDocument.Load(String uri, LoadOptions options) at System.Xml.Linq.XDocument.Load(String uri) at Issues.Form1.button1_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- Issues Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/Documents%20and%20Settings/sumsnl.LTSLFBD/Desktop/Process%20Improvement/Issues%20Register/Issues.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- 4u_pgrmq Assembly Version: 1.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

    Read the article

  • My google map android app keeps crashing

    - by Manny264
    I have followed about two tutorials from vogella and some other tutorial that looked similar...very similar but to no avail. I load the app on my nexus 7 and it just crashes "Unfortunately MyMapView has stopped working" on launch.This is the manifest: ` <uses-sdk android:minSdkVersion="17" android:targetSdkVersion="17" /> <uses-feature android:glEsVersion="0x00020000" android:required="true"/> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES"/> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <uses-library android:name="com.google.android.maps" /> <activity android:name="com.macmozart.mymapview.MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <meta-data android:name="com.google.android.maps.v2.API_KEY" android:value="AIzaSyBZ1Bt7rjB863Jy-B05zls6k8XZsBGQ6-4" /> </application> ` Followed by my main layout: <fragment android:id="@+id/map" android:layout_width="match_parent" android:layout_height="match_parent" class="com.google.android.gms.maps.MapFragment" /> and finally my java class: package com.macmozart.mymapview; import android.app.Activity; import android.os.Bundle; import com.google.android.gms.maps.CameraUpdateFactory; import com.google.android.gms.maps.GoogleMap; import com.google.android.gms.maps.MapFragment; import com.google.android.gms.maps.model.BitmapDescriptorFactory; import com.google.android.gms.maps.model.LatLng; import com.google.android.gms.maps.model.Marker; import com.google.android.gms.maps.model.MarkerOptions; import com.google.android.maps.*; public class MainActivity extends Activity { static final LatLng HAMBURG = new LatLng(53.558, 9.927); static final LatLng KIEL = new LatLng(53.551, 9.993); private GoogleMap map; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); map = ((MapFragment) getFragmentManager().findFragmentById(R.id.map)) .getMap(); if (map != null) { Marker hamburg = map.addMarker(new MarkerOptions() .position(HAMBURG).title("Hamburg")); Marker kiel = map.addMarker(new MarkerOptions() .position(KIEL) .title("Kiel") .snippet("Kiel is cool") .icon(BitmapDescriptorFactory .fromResource(R.drawable.ic_launcher))); map.moveCamera(CameraUpdateFactory.newLatLngZoom(HAMBURG, 15)); // Zoom in, animating the camera. map.animateCamera(CameraUpdateFactory.zoomTo(10), 2000, null); } } } Any idea what im doing wrong I really need this to work

    Read the article

  • Qt Linker Errors

    - by Kyle Rozendo
    Hi All, I've been trying to get Qt working (QCreator, QIde and now VS2008). I have sorted out a ton of issues already, but I am now faced with the following build errors, and frankly I'm out of ideas. Error 1 error LNK2019: unresolved external symbol "public: void __thiscall FileVisitor::processFileList(class QStringList)" (?processFileList@FileVisitor@@QAEXVQStringList@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 2 error LNK2019: unresolved external symbol "public: void __thiscall FileVisitor::processEntry(class QString)" (?processEntry@FileVisitor@@QAEXVQString@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 3 error LNK2019: unresolved external symbol "public: class QString __thiscall ArgumentList::getSwitchArg(class QString,class QString)" (?getSwitchArg@ArgumentList@@QAE?AVQString@@V2@0@Z) referenced in function _main codevisitor-test.obj Question1 Error 4 error LNK2019: unresolved external symbol "public: bool __thiscall ArgumentList::getSwitch(class QString)" (?getSwitch@ArgumentList@@QAE_NVQString@@@Z) referenced in function _main codevisitor-test.obj Question1 Error 5 error LNK2019: unresolved external symbol "public: void __thiscall ArgumentList::argsToStringlist(int,char * * const)" (?argsToStringlist@ArgumentList@@QAEXHQAPAD@Z) referenced in function "public: __thiscall ArgumentList::ArgumentList(int,char * * const)" (??0ArgumentList@@QAE@HQAPAD@Z) codevisitor-test.obj Question1 Error 6 error LNK2019: unresolved external symbol "public: __thiscall FileVisitor::FileVisitor(class QString,bool,bool)" (??0FileVisitor@@QAE@VQString@@_N1@Z) referenced in function "public: __thiscall CodeVisitor::CodeVisitor(class QString,bool)" (??0CodeVisitor@@QAE@VQString@@_N@Z) codevisitor-test.obj Question1 Error 7 error LNK2001: unresolved external symbol "public: virtual struct QMetaObject const * __thiscall FileVisitor::metaObject(void)const " (?metaObject@FileVisitor@@UBEPBUQMetaObject@@XZ) codevisitor-test.obj Question1 Error 8 error LNK2001: unresolved external symbol "public: virtual void * __thiscall FileVisitor::qt_metacast(char const *)" (?qt_metacast@FileVisitor@@UAEPAXPBD@Z) codevisitor-test.obj Question1 Error 9 error LNK2001: unresolved external symbol "public: virtual int __thiscall FileVisitor::qt_metacall(enum QMetaObject::Call,int,void * *)" (?qt_metacall@FileVisitor@@UAEHW4Call@QMetaObject@@HPAPAX@Z) codevisitor-test.obj Question1 Error 10 error LNK2001: unresolved external symbol "protected: virtual bool __thiscall FileVisitor::skipDir(class QDir const &)" (?skipDir@FileVisitor@@MAE_NABVQDir@@@Z) codevisitor-test.obj Question1 Error 11 fatal error LNK1120: 10 unresolved externals ... \Visual Studio 2008\Projects\Assignment1\Question1\Question1\Debug\Question1.exe Question1 The code is as follows: #include "argumentlist.h" #include <codevisitor.h> #include <QDebug> void usage(QString appname) { qDebug() << appname << " Usage: \n" << "codevisitor [-r] [-d startdir] [-f filter] [file-list]\n" << "\t-r \tvisitor will recurse into subdirs\n" << "\t-d startdir\tspecifies starting directory\n" << "\t-f filter\tfilename filter to restrict visits\n" << "\toptional list of files to be visited"; } int main(int argc, char** argv) { ArgumentList al(argc, argv); QString appname = al.takeFirst(); /* app name is always first in the list. */ if (al.count() == 0) { usage(appname); exit(1); } bool recursive(al.getSwitch("-r")); QString startdir(al.getSwitchArg("-d")); QString filter(al.getSwitchArg("-f")); CodeVisitor cvis(filter, recursive); if (startdir != QString()) { cvis.processEntry(startdir); } else if (al.size()) { cvis.processFileList(al); } else return 1; qDebug() << "Files Processed: %d" << cvis.getNumFiles(); qDebug() << cvis.getResultString(); return 0; } Thanks in advance, I'm simply stumped.

    Read the article

  • Spring, Hibernate, Blob lazy loading

    - by Alexey Khudyakov
    Dear Sirs, I need help with lazy blob loading in Hibernate. I have in my web application these servers and frameworks: MySQL, Tomcat, Spring and Hibernate. The part of database config. <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close"> <property name="user" value="${jdbc.username}"/> <property name="password" value="${jdbc.password}"/> <property name="driverClass" value="${jdbc.driverClassName}"/> <property name="jdbcUrl" value="${jdbc.url}"/> <property name="initialPoolSize"> <value>${jdbc.initialPoolSize}</value> </property> <property name="minPoolSize"> <value>${jdbc.minPoolSize}</value> </property> <property name="maxPoolSize"> <value>${jdbc.maxPoolSize}</value> </property> <property name="acquireRetryAttempts"> <value>${jdbc.acquireRetryAttempts}</value> </property> <property name="acquireIncrement"> <value>${jdbc.acquireIncrement}</value> </property> <property name="idleConnectionTestPeriod"> <value>${jdbc.idleConnectionTestPeriod}</value> </property> <property name="maxIdleTime"> <value>${jdbc.maxIdleTime}</value> </property> <property name="maxConnectionAge"> <value>${jdbc.maxConnectionAge}</value> </property> <property name="preferredTestQuery"> <value>${jdbc.preferredTestQuery}</value> </property> <property name="testConnectionOnCheckin"> <value>${jdbc.testConnectionOnCheckin}</value> </property> </bean> <bean id="lobHandler" class="org.springframework.jdbc.support.lob.DefaultLobHandler" /> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="configLocation" value="/WEB-INF/hibernate.cfg.xml" /> <property name="configurationClass" value="org.hibernate.cfg.AnnotationConfiguration" /> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${hibernate.dialect}</prop> </props> </property> <property name="lobHandler" ref="lobHandler" /> </bean> <tx:annotation-driven transaction-manager="txManager" /> <bean id="txManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sessionFactory" /> </bean> The part of entity class @Lob @Basic(fetch=FetchType.LAZY) @Column(name = "BlobField", columnDefinition = "LONGBLOB") @Type(type = "org.springframework.orm.hibernate3.support.BlobByteArrayType") private byte[] blobField; The problem description. I'm trying to display on a web page database records related to files, which was saved in MySQL database. All works fine if a volume of data is small. But the volume of data is big I'm recieving an error "java.lang.OutOfMemoryError: Java heap space" I've tried to write in blobFields null values on each row of table. In this case, application works fine, memory doesn't go out of. I have a conclusion that the blob field which is marked as lazy (@Basic(fetch=FetchType.LAZY)) isn't lazy, actually! How can I solve the issie? Many thanks for advance.

    Read the article

  • Asp.net mvc application deployment / security issues

    - by WestDiscGolf
    I'll start with appologies; I wasn't sure if this was best posted here of Server Fault so if its in the wrong place then please move :-) Basic information I have written the first module of a new application at work. This is written using Visual Studio 2010, targetting .net 3.5 (at the moment) and asp.net mvc 2. This has been working fine during development running on the built in Development server from VS but however does not work once deployed to IIS 7/7.5. To deploy the application, I have built it in release mode and created a deployment package by right clicking on the project in the solution explorer (this will be done with an automated build in tfs once upgrade from the beta). This has then been imported into IIS on the server. The application is using windows/domain authentication. Issue #1 I can fire up internet explorer and browse to the application from a client computer as well as on a remote desktop connection. I can execute the code which reads/stores data in Session fine from the IE instance on the remote desktop but if I browse to it from the client pc it seems to lose the session state. I click on the form submit and the page refreshes and doesn't execute the required code. I've tried setting with; InProc, SQLServer and StateServer. but with no luck :-( Issue #2 As part of the application it views PDF and Tiff documents on the fly which are on a network share on the office network and creates thumbnails if the document hasn't been viewed before. This works if running on the machine the application is deployed to; however when browsing from a client pc I get an error saying: Access to the path '\\fileserver\folder\file.tif' is denied Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Access to the path '\\fileserver\folder\file.TIF' is denied. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via , the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. As this is on a different server the user is not accessible. To get round this I have tried: 1 - setting the application pool to run as domain administrator (I know this is a security risk, but I'm just trying to get it to work at the moment!) 2 - to set the log on account for World Wide Web Publishing service to be the domain admin . When trying to restart the service I get ... Windows could not start the World Wide Web Publishing Service service on the Local Computer. Error 1079: The account specified for this service is different from the account specified fro the other services running in the same process. Any pointers/help would be much appriciated as I'm pulling my hair out (of what little I have left). Update I've been using this funky little tool I found - DelegConfig v2 beta (Delegation / Kerberos Configuration Tool). This has been really usefull. So I've got the accessing of the file share working (there is a test page which will read the files) so now I've just got the issue of passing through the users credentials through to the SQL Server (wans't my choice to do it this way!!) to execute the queries etc. but I can't get it to log on as the user. It tries to access it as "NT Authority\Network Service" which doesn't have a sql login (as should be the logged on user). My connection string is: <add name="User" connectionString="Data Source=.;Integrated Security=True" providerName="System.Data.SqlClient" /> No initial catalog is specified as the system is over multiple dbs (also wasn't my choice!!). I really appriciate all the help so far! :-) Any further hints?!

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >