Search Results

Search found 2601 results on 105 pages for 'commit'.

Page 98/105 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• how to allow certain packet with certian destination ports to forward using iptables?

  - by moataz metwally

  i have server and i virualized it into multiple windws vps's using kvm. i would like to make all vps behind the server firewall. to control all the ports of all vps's from the host server.i have tried to do this by that iptables file but it still blocking all the forward packets. when i remove -A FORWARD -j DROP from the file the vps will be out of the firewall control : # Generated by iptables-save v1.4.7 on Mon Oct 21 04:30:35 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [49:7546] -A OUTPUT -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j DROP -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 5901:6010,4080:4085 -j ACCEPT -A FORWARD -p tcp -s 0/0 -d 0/0 --destination-port 3389 -j ACCEPT -A INPUT -j DROP -A FORWARD -j DROP COMMIT # Completed on Mon Oct 21 04:30:35 2013 and my ifconfig output: eth0 Link encap:Ethernet HWaddr 6C:62:6D:EF:B8:77 inet6 addr: fe80::6e62:XXX:feef:b877/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4460000 errors:0 dropped:0 overruns:0 frame:0 TX packets:1825697 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5461498823 (5.0 GiB) TX bytes:547852516 (522.4 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6380 errors:0 dropped:0 overruns:0 frame:0 TX packets:6380 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6481652 (6.1 MiB) TX bytes:6481652 (6.1 MiB) natbr2 Link encap:Ethernet HWaddr 52:54:00:48:72:53 inet addr:88.XXX.XXX.X53 Bcast:88.198.242.159 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1338720 errors:0 dropped:0 overruns:0 frame:0 TX packets:3570844 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:434791198 (414.6 MiB) TX bytes:4321751647 (4.0 GiB) viif1001 Link encap:Ethernet HWaddr FE:16:3E:0F:41:D8 inet6 addr: fe80::fc16:XXX:fe0f:41d8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:358229 errors:0 dropped:0 overruns:0 frame:0 TX packets:479289 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:50127351 (47.8 MiB) TX bytes:261223068 (249.1 MiB) viif1002 Link encap:Ethernet HWaddr FE:16:3E:EA:65:FA inet6 addr: fe80::fc16:XXX:feea:65fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:575590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1489296 errors:0 dropped:0 overruns:5412 carrier:0 collisions:0 txqueuelen:500 RX bytes:243629668 (232.3 MiB) TX bytes:1724640936 (1.6 GiB) viif1003 Link encap:Ethernet HWaddr FE:16:3E:2B:85:0E inet6 addr: fe80::fc16:XXX:fe2b:850e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:413052 errors:0 dropped:0 overruns:0 frame:0 TX packets:1741801 errors:0 dropped:0 overruns:299 carrier:0 collisions:0 txqueuelen:500 RX bytes:147931054 (141.0 MiB) TX bytes:2338132498 (2.1 GiB) viifbr0 Link encap:Ethernet HWaddr 6C:62:6D:EF:B8:77 inet addr:176.XX.XX.X9 Bcast:176.9.0.95 Mask:255.255.255.224 inet6 addr: fe80::6e62:XXX:feef:b877/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2685666 errors:0 dropped:0 overruns:0 frame:0 TX packets:1472089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4244043694 (3.9 GiB) TX bytes:523110523 (498.8 MiB)

  Read the article

• NHibernate and MySql is inserting and Selecting, not updating

  - by Chris Brandsma

  Something strange is going on with NHibernate for me. I can select, and I can insert. But I can't do and update against MySql. Here is my domain class public class UserAccount { public virtual int Id { get; set; } public virtual string UserName { get; set; } public virtual string Password { get; set; } public virtual bool Enabled { get; set; } public virtual string FirstName { get; set; } public virtual string LastName { get; set; } public virtual string Phone { get; set; } public virtual DateTime? DeletedDate { get; set; } public virtual UserAccount DeletedBy { get; set; } } Fluent Mapping public class UserAccountMap : ClassMap<UserAccount> { public UserAccountMap() { Table("UserAccount"); Id(x => x.Id); Map(x => x.UserName); Map(x => x.Password); Map(x => x.FirstName); Map(x => x.LastName); Map(x => x.Phone); Map(x => x.DeletedDate); Map(x => x.Enabled); } } Here is how I'm creating my Session Factory var dbconfig = MySQLConfiguration .Standard .ShowSql() .ConnectionString(a => a.FromAppSetting("MySqlConnStr")); FluentConfiguration config = Fluently.Configure() .Database(dbconfig) .Mappings(m => { var mapping = m.FluentMappings.AddFromAssemblyOf<TransactionDetail>(); mapping.ExportTo(mappingdir); }); and this is my NHibernate code: using (var trans = Session.BeginTransaction()) { var user = GetById(userId); user.Enabled = false; user.DeletedDate = DateTime.Now; user.UserName = "deleted_" + user.UserName; user.Password = "--removed--"; Session.Update(user); trans.Commit(); } No exceptions are being thrown. No queries are being logged. Nothing.

  Read the article

• Gitorious errors

  - by Switz

  I installed Gitorious on my (shared) hosting. I was getting errors, but I seemed to have fixed most of them. It is working. When I commit/push, I get a lot of remote: errors spewed out although it does push the files properly from what I can tell. Here are the errors I'm getting (I swapped out the domain to git.domain.com): $ git push origin master Counting objects: 5, done. Delta compression using up to 2 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (3/3), 283 bytes, done. Total 3 (delta 2), reused 0 (delta 0) remote: /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `const_defined?': wrong constant name Admin/usersHelper (NameError) remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:361:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/inflector.rb:360:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/core_ext/string/inflections.rb:162:in `constantize' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:137:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:120:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/actionpack/lib/action_controller/helpers.rb:115:in `helper' remote: from /home/saegit/GIT.DOMAIN.COM/app/controllers/searches_controller.rb:22 remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:158:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:265:in `require_or_load' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:224:in `depend_on' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/activesupport/lib/active_support/dependencies.rb:136:in `require_dependency' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:414:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:413:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `each' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:411:in `load_application_classes' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:197:in `process' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `send' remote: from /home/saegit/GIT.DOMAIN.COM/vendor/rails/railties/lib/initializer.rb:113:in `run' remote: from /home/saegit/GIT.DOMAIN.COM/config/environment.rb:24 remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `require' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:27:in `load_env' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:31:in `load_processor' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:55:in `queue' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging/sync_adapter.rb:59:in `do_publish' remote: from /home/saegit/GIT.DOMAIN.COM/lib/gitorious/messaging.rb:39:in `publish' remote: from ./hooks/messaging.rb:45:in `post_message' remote: from hooks/post-receive:37 remote: => Syncing Gitorious... To [email protected]:os/ptd.git 7526ccb..3316eb2 master -> master

  Read the article

• ufw portforwarding to virtualbox guest

  - by user85116

  My goal is to be able to connect using remote desktop on my desktop machine, to windows xp running in virtualbox on my linux server. My setup: server = debian squeeze, 64 bit, with a public IP address (host) virtualbox-ose 3.2.10 (from debian repo) windows xp running inside VBox as a guest; bridged networking mode in VBox, ip = 192.168.1.100 ufw as the firewall on debian, 3 ports are opened: 22 / ssh, 80 / apache, and 3389 for remote desktop My problem: If I try to use remote desktop on my home computer, I am unable to connect to the windows guest. If I first "ssh -X -C" into the debian server, then run "rdesktop 192.168.1.100", I am able to connect without issue. The windows firewall was configured to allow remote desktop connections, and I've even turned it off (as it is redundant here) to see if that was the problem but it made no difference. Since I am able to connect from inside the local subnet, I suspect that I have not setup my debian firewall correctly to handle connections from outside the LAN. Here is what I've done... First my ufw status: ufw status Status: active To Action From -- ------ ---- 22 ALLOW Anywhere 80 ALLOW Anywhere 3389 ALLOW Anywhere I edited /etc/ufw/sysctl.conf and added: net/ipv4/ip_forward=1 Edited /etc/default/ufw and added: DEFAULT_FORWARD_POLICY="ACCEPT" Edited /etc/ufw/before.rules and added: # setup port forwarding to forward rdp to windows VM *nat :PREROUTING - [0:0] -A PREROUTING -i eth0 -p tcp --dport 3389 -j DNAT --to-destination 192.168.1.100 -A PREROUTING -i eth0 -p udp --dport 3389 -j DNAT --to-destination 192.168.1.100 COMMIT # Don't delete these required lines, otherwise there will be errors *filter <snip> Restarted the firewall etc., but no connection. My log files on the debian host show this (my public ip address was removed for this posting but it is correct in the actual log): Feb 6 11:11:21 localhost kernel: [171991.856941] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:21 localhost kernel: [171991.856963] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856701] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856723] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856656] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856678] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Although this is the current setup / configuration, I've also tried several variations of this; I thought maybe the ISP would be blocking 3389 for some reason and tried using different ports, but again there was no connection. Any ideas...? Did I forget to modify some file somewhere?

  Read the article

• RAID and Partitions, guidance Needed

  - by beauregarde

  Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

  Read the article

• Xen kernel can't see 2 disks of 6 of 1TB, does it have a limitation?

  - by PartySoft

  Linux gentoo-xen 2.6.18-xen-r12 #3 SMP Tue Oct 5 09:28:53 PDT 2010 x86_64 Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux I have 6 disks of 1 TB and i can't see all of them only 4, can anyone give me an ideea what can i do ? Filesystem Size Used Avail Use% Mounted on rootfs 886G 4.4G 836G 1% / /dev/sda3 886G 4.4G 836G 1% / rc-svcdir 1.0M 44K 980K 5% /lib64/rc/init.d shm 7.9G 0 7.9G 0% /dev/shm /dev/sdb1 917G 200M 871G 1% /home2 /dev/sdc1 917G 200M 871G 1% /home3 /dev/sdd1 917G 200M 871G 1% /home4 The hardware is Dual xeon E5506 processors on a supermicro X8DTL mobo 4.346585] ata3.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.346588] ata3.00: ata3: dev 0 multi count 16 [ 4.352861] ata3.00: configured for UDMA/133 [ 4.352867] scsi3 : ata_piix [ 4.352875] PM: Adding info for No Bus:host3 [ 4.510584] ata4.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.510587] ata4.00: ata4: dev 0 multi count 16 [ 4.516848] ata4.00: configured for UDMA/133 [ 4.516861] PM: Adding info for No Bus:target2:0:0 [ 4.516905] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.516910] Type: Direct-Access ANSI SCSI revision: 05 [ 4.516920] PM: Adding info for scsi:2:0:0:0 [ 4.517452] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517460] sde: Write Protect is off [ 4.517461] sde: Mode Sense: 00 3a 00 00 [ 4.517478] SCSI device sde: drive cache: write back [ 4.517514] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517521] sde: Write Protect is off [ 4.517522] sde: Mode Sense: 00 3a 00 00 [ 4.517532] SCSI device sde: drive cache: write back [ 4.517534] sde: sde1 [ 4.524551] sd 2:0:0:0: Attached scsi disk sde [ 4.524855] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 4.524874] PM: Adding info for No Bus:target3:0:0 [ 4.524928] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.524933] Type: Direct-Access ANSI SCSI revision: 05 [ 4.524946] PM: Adding info for scsi:3:0:0:0 [ 4.525216] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525227] sdf: Write Protect is off [ 4.525228] sdf: Mode Sense: 00 3a 00 00 [ 4.525242] SCSI device sdf: drive cache: write back [ 4.525280] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525286] sdf: Write Protect is off [ 4.525289] sdf: Mode Sense: 00 3a 00 00 [ 4.525301] SCSI device sdf: drive cache: write back [ 4.525302] sdf: sdf1 [ 4.532691] sd 3:0:0:0: Attached scsi disk sdf [ 4.533010] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 4.977669] scsi: <fdomain> Detection failed (no card) [ 5.030479] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.030635] GDT-HA: Found 0 PCI Storage RAID Controllers [ 5.372350] Fusion MPT base driver 3.04.01 [ 5.372358] Copyright (c) 1999-2005 LSI Logic Corporation [ 5.579176] Fusion MPT SPI Host driver 3.04.01 [ 5.881777] ieee1394: Initialized config rom entry `ip1394' [ 6.166745] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 6.166748] ieee1394: sbp2: Try serialize_io=0 for better performance [ 6.428866] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 6.428872] md: bitmap version 4.39 [ 6.431518] md: raid0 personality registered for level 0 [ 6.495979] md: raid1 personality registered for level 1 [ 6.570270] raid5: automatically using best checksumming function: generic_sse [ 6.575523] generic_sse: 6608.000 MB/sec [ 6.575526] raid5: using function: generic_sse (6608.000 MB/sec) [ 6.596226] raid6: int64x1 1835 MB/s [ 6.613231] raid6: int64x2 1773 MB/s [ 6.630256] raid6: int64x4 1675 MB/s [ 6.647296] raid6: int64x8 1027 MB/s [ 6.664267] raid6: sse2x1 3578 MB/s [ 6.681268] raid6: sse2x2 4207 MB/s [ 6.698280] raid6: sse2x4 4625 MB/s [ 6.698281] raid6: using algorithm sse2x4 (4625 MB/s) [ 6.698285] md: raid6 personality registered for level 6 [ 6.698286] md: raid5 personality registered for level 5 [ 6.698288] md: raid4 personality registered for level 4 [ 6.781090] md: raid10 personality registered for level 10 [ 7.007043] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 7.007046] Copyright (c) 1999-2006 Intel Corporation. [ 9.229465] kjournald starting. Commit interval 5 seconds [ 9.229476] EXT3-fs: mounted filesystem with ordered data mode.

  Read the article

• overriding new ubuntu installation

  - by tkoomzaaskz

  I've got a ubuntu 11.10 which has lost its support in May 2013, now I'd like to reintall up to the most up-to-date LTS, which is 12.04. My question is regarding my current partitions and doing backups. Is there a safe way to backup my data on some local partitions instead of copying files into DVDs/external drives (this is very uncormortable in my situation). Following are system commands shoing my disk: $ lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 232,9G 0 +-sda1 8:1 0 48,8G 0 +-sda2 8:2 0 63G 0 +-sda3 8:3 0 1K 0 +-sda4 8:4 0 53,7G 0 / +-sda5 8:5 0 18,6G 0 +-sda6 8:6 0 25,5G 0 +-sda7 8:7 0 23,3G 0 [SWAP] sr0 11:0 1 1024M 0 and $ sudo fdisk -l [sudo] password for xyz: Disk /dev/sda: 250.1 GB, 250059350016 bytes glowic: 255, sektorów/sciezke: 63, cylindrów: 30401, w sumie sektorów: 488397168 Jednostka = sektorów, czyli 1 * 512 = 512 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0xc3ffc3ff Device Boot Beginning End Blocks ID System /dev/sda1 * 2048 102402047 51200000 7 HPFS/NTFS/exFAT /dev/sda2 215044096 347080703 66018304 7 HPFS/NTFS/exFAT /dev/sda3 347082750 488392064 70654657+ 5 Extended /dev/sda4 102402048 215042047 56320000 83 Linux /dev/sda5 395905923 434975939 19535008+ 83 Linux /dev/sda6 434976003 488392064 26708031 83 Linux /dev/sda7 347082752 395905023 24411136 82 Linux swap / Solaris In the beginning I had Windows Vista pre-installed with the machine when it was bought (damn!) and I installed linux (the one I have now). The windows-program in master boot record has been overriden by grub and now I can boot with both Windows and Linux. This is list of mounted devices: $ mount /dev/sda4 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/tomasz/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tomasz) It's strange (I don't remember such thing) that my current linux uses only one partition (/dev/sda4). But, anyway, it seems like that. My final question is: am I able to use one of the existing linux partitions for a backup and install ubuntu 12.04 without removing neither windows nor ubuntu 11.04? I mean - will grub automatically accept both old windows vista and 2 linuxes (old 11.10 and "new" 12.04)? Is there any hidden operation done while installation that could harm my custom-backup-partition while installing? my fstab file: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=d44e89f5-9da2-48eb-83b3-887652ec95d2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=bbe50535-ba57-434a-9272-211d859f0e00 none swap sw 0 0 sda5 and sda6 are trash partitions created during unsuccessful linux installation (this was linux installation before my current installation), I didn't delete these partitions, but I have access to them (and I can use them as backup partitions). edit: second question is: why does lsblk show /dev/sda having 232,9G while fdisk shows that it has 250.1GB? Where does the difference come from?

  Read the article

• synchronization of file locations between two machines

  - by intuited

  Although similar threads have been asked on this site and its siblings before, I've not managed to glean the answer to this persistent question. Any help is much appreciated. The situation: I've got two laptops; both contain a ton of music. Sometimes I move these music files to different locations, or change the metadata in them, or convert them to a different format. I might do any of these things on either machine. I rarely do all of them at once — ie it's unlikely that I'll convert a file's format and move it to a different location all in one go. I'd like to be able to synchronize these changes without having to sift through everything that was renamed or moved. I'm familiar with rsync but I find it inadequate, because although it can compute checksums, it doesn't have any way to store them. So if a file differs, it can't figure out which side it changed on. This also means that it can't attempt to match a missing file to a new one with the same checksum (ie a move) if the filesize and date are the same, it , so it takes an epoch to do a sync on a large repository. I would like to only check the checksum if the files even if you turn on checksumming, it still doesn't use it intelligently: ie it checksums files even if the sizes differ. IIRC. it's not able to use file metadata as a means of file comparison. this is sort of a wishlist item but it seems doable. I've also looked into rsnapshot, but its requirement to create a full backup is impractical in this situation. I don't need a backup, I just need a record of what file with each hash was where when. Unison seems like it might be able to do something vaguely along these lines, but I'm loathe to spend hours wading through its details only to discover that it's sadly lacking. Plus, it's fun asking questions on here. What I'd like is a tool that does something along these lines: keeps track of file checksums or of actual renames, possibly using inotify to greatly reduce resource consumption/latency stores a database containing this info, along with other pertinencies like the file format and metadata, the actual inode, the filename history, etc. uses this info to provide more-intelligent synchronization with a counterpart on the other side. So for example: if a file has been converted from flac to ogg, but kept the same base filename, or the same metadata, it should be able to send the new version over, and the other side should delete the original. Probably it should actually sequester it somewhere in case they or you screwed up, but that's a detail. And then when the transaction is done, the state is logged so that the next time the two interact they can work out their differences. Maybe all this metadata stuff is a fancy pipe dream. I would actually be pretty happy if there was something out there that could just use checksums in an intelligent way. This would be sort of like having the intelligence of something like git, minus the need to duplicate data in an index/backup/etc (and branching, and checkouts, and all the other great stuff that RCSs do. basically just fast forward commit pushes are all I want, with maybe the option to roll back.) So is there something out there that can do this? If not, can someone suggest a good way to start making it?

  Read the article

• SQL2008R2 install issues on windows 7 - unable to install setup support files?

  - by Liam

  I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

  Read the article

• pptpd not working externally on Ubuntu Server 11.10

  - by Brendan

  I am trying to set up a pptpd vpn on our newly installed Ubuntu 11.10 64 bit server, but am not having success having a client connect via an iPhone to the VPN. Note that no clients have been able to connect to this VPN from outside of the network. The system is up to date with patches. Here is the output of /var/log/syslog. Please note that 222.153.x.y is my remote IP address. Mar 30 22:07:47 server pptpd[9546]: CTRL: Client 222.153.x.y control connection started Mar 30 22:07:47 server pptpd[9546]: CTRL: Starting call (launching pppd, opening GRE) Mar 30 22:07:47 server pppd[9555]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Mar 30 22:07:47 server pppd[9555]: pppd 2.4.5 started by root, uid 0 Mar 30 22:07:47 server pppd[9555]: Using interface ppp0 Mar 30 22:07:47 server pppd[9555]: Connect: ppp0 <--> /dev/pts/3 Mar 30 22:07:47 server pptpd[9546]: GRE: Bad checksum from pppd. Mar 30 22:08:17 server pppd[9555]: LCP: timeout sending Config-Requests Mar 30 22:08:17 server pppd[9555]: Connection terminated. Mar 30 22:08:17 server pppd[9555]: Modem hangup Mar 30 22:08:17 server pppd[9555]: Exit. Mar 30 22:08:17 server pptpd[9546]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Mar 30 22:08:17 server pptpd[9546]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Mar 30 22:08:17 server pptpd[9546]: CTRL: Reaping child PPP[9555] Mar 30 22:08:17 server pptpd[9546]: CTRL: Client 222.153.x.y control connection finished As you can see, the problem seems to be the connection timing out after 30 seconds ("Mar 30 22:08:17 server pppd[9555]: LCP: timeout sending Config-Requests". Over Wifi however (inside the local network) there are no issues: Mar 30 22:12:33 unreal-server pptpd[12406]: CTRL: Client 192.168.0.100 control connection started Mar 30 22:12:33 unreal-server pptpd[12406]: CTRL: Starting call (launching pppd, opening GRE) Mar 30 22:12:33 unreal-server pppd[12407]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Mar 30 22:12:33 unreal-server pppd[12407]: pppd 2.4.5 started by root, uid 0 Mar 30 22:12:33 unreal-server pppd[12407]: Using interface ppp0 Mar 30 22:12:33 unreal-server pppd[12407]: Connect: ppp0 <--> /dev/pts/3 Mar 30 22:12:33 unreal-server pptpd[12406]: GRE: Bad checksum from pppd. Mar 30 22:12:36 unreal-server pppd[12407]: peer from calling number 192.168.0.100 authorized Mar 30 22:12:36 unreal-server pppd[12407]: MPPE 128-bit stateless compression enabled Mar 30 22:12:36 unreal-server pppd[12407]: Cannot determine ethernet address for proxy ARP Mar 30 22:12:36 unreal-server pppd[12407]: local IP address 192.168.0.10 Mar 30 22:12:36 unreal-server pppd[12407]: remote IP address 192.168.1.1 I have set up an iptables config for the server; to check this isn't the problem I allowed all traffic temporarily, but this does NOT change the symptoms in the first example. Here is the output from /etc/iptables.rules.save *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT Even with these rules applied, the output from /var/log/syslog is LINE FOR LINE what I saw in the the first block of code. Please note that before running this Ubuntu server; an old SME Server box was running in place of it, that had a pptpd server on it just like we are using, and we experienced no issues.

  Read the article

• iptables 1.4 and passive FTP on custom port

  - by Cracky

  after the upgrade from debian squeeze to wheezy I've got a problem with passive FTP connection. I could narrow it to be iptables related, as I could connect via FTP w/o problems after adding my IP to the iptables ACCEPT rule. Before the upgrade I was able just to do modprobe nf_conntract_ftp ports=21332 and adding iptables -A THRU -p tcp --dport 21332 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT now..it doesn't help anymore. The INPUT rule is being triggered as I can see in the counter, but the directory listing is the last thing it does. Setting up a passive-port range is the last thing I want to do, I dislike open ports. I also tried the trick with helper mod by adding following rule before the actual rule for 21332 iptables -A THRU -p tcp -i eth0 --dport 21332 -m state --state NEW -m helper --helper ftp-21332 -j ACCEPT but it doesn't help and is even not being triggered according to counter. The rule in the next line (w/o helper) is being triggered.. here some info: # iptables --version iptables v1.4.14 # lsmod |grep nf_ nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack_ipv4 14078 32 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack 52720 7 xt_state,nf_conntrack_ipv4,xt_conntrack,nf_conntrack_ftp,nf_nat,nf_nat_ftp,xt_helper # uname -a Linux loki 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux # iptables-save # Generated by iptables-save v1.4.14 on Sun Jun 30 03:54:28 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :BLACKLIST - [0:0] :LOGDROP - [0:0] :SPAM - [0:0] :THRU - [0:0] :WEB - [0:0] :fail2ban-dovecot-pop3imap - [0:0] :fail2ban-pureftpd - [0:0] :fail2ban-ssh - [0:0] -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -p tcp -m multiport --dports 21,21332 -j fail2ban-pureftpd -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,ACK FIN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags ACK,URG URG -j DROP -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -j BLACKLIST -A INPUT -j THRU -A INPUT -j LOGDROP -A OUTPUT -j ACCEPT -A OUTPUT -s 93.223.38.223/32 -j ACCEPT -A BLACKLIST -s 38.113.165.0/24 -j LOGDROP -A BLACKLIST -s 202.177.216.0/24 -j LOGDROP -A BLACKLIST -s 130.117.190.0/24 -j LOGDROP -A BLACKLIST -s 117.79.92.0/24 -j LOGDROP -A BLACKLIST -s 72.47.228.0/24 -j LOGDROP -A BLACKLIST -s 195.200.70.0/24 -j LOGDROP -A BLACKLIST -s 195.200.71.0/24 -j LOGDROP -A LOGDROP -m limit --limit 5/sec -j LOG --log-prefix drop_packet_ --log-level 7 -A LOGDROP -p tcp -m tcp --dport 25 -m limit --limit 2/sec -j LOG --log-prefix spam_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 80 -m limit --limit 2/sec -j LOG --log-prefix web_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 22 -m limit --limit 2/sec -j LOG --log-prefix ssh_blacklist --log-level 7 -A LOGDROP -j REJECT --reject-with icmp-host-prohibited -A THRU -p icmp -m limit --limit 1/sec -m icmp --icmp-type 8 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 25 -j ACCEPT -A THRU -i eth0 -p udp -m udp --dport 53 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 110 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 143 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 465 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 585 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 993 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 995 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 2008 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 10011 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 21332 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 30033 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-ssh -j RETURN -A fail2ban-ssh -j RETURN COMMIT # Completed on Sun Jun 30 03:54:28 2013 So, as I said, I have no problems with connecting when adding my IP to go through..but that's not a solution as noone except me can connect anymore~ If someone got an idea what the problem is, please help me! Thanks Cracky

  Read the article

• Windows 7 disk errors after a few hours of runtime

  - by GFK

  I'm having trouble understanding what is going on with my work PC. Whenever I boot it, it runs fine for a while, then starts to randomly show disk errors. The displayed error often contains the message "not enough storage is available to process this command", although depending on the application that fails it can be different. This has happened for weeks now and is getting worse. This is what troubles me: It never seems to impact critical parts of the system (no BSOD, no freeze). Only some applications seem impacted, refusing to function correctly after a while: Outlook 2010 cannot download RSS feeds anymore, Firefox 6 or IE9 cannot download anything bigger than 3MB without failing, Windows Update fails, all msi installers fail, Visual Studio 2010 starts failing in weird manners... It only happens after a while using it (typically 3 hours, but it seems that installing a program or compiling several times makes it shorter) Rebooting solves it (temporarily). The system: The OS is Windows 7 Pro Spanish SP1, 32 bits The system is an HP Compaq 6000 Pro with 4 GB memory (only 3.4GB usable since the system is 32bit), one 500GB hard drive. Installed applications include: Visual Studio 2010, SQL Server 2008 R2, VMWare Workstation 7, Microsoft Security Essentials, Office 2010. Shutting down all related services and processes doesn't seem to change anything. The diagnostics I've run so far: Hard drive : 465GB, 165GB free Process Explorer : physical and virtual memory seem ok (pagefile is 5.3GB, physical memory usage 70%, system commit 39%) Windows Memory diagnostic tool: OK CHKDSK returned: 488282111 KB total disk space. 281668248 KB in 265779 files. 150188 KB in 62949 indexes. 0 KB in bad sectors. 571755 KB in use by the system. The log file has occupied 65536 kilobytes. 205891920 KB available on disk. For non-spanish speakers, that means all ok. SMART diagnostic tools (DiskCheckup) report all values normal. temperatures are in the normal range (HWinfo). The event viewer doesn't seem to contain any significant message. ran CCleaner 3, without any noticeable effect. I was thinking about some file number limit (between Visual Studio projects and other applications, there are around 300.000 files on the hard drive), but I couldn't find any. It's possible there is something related with the use of the temporary folders (it's the only explanation I have for why applications fail but Windows doesn't), but I cannot confirm that. Only thing I cannot find out is if chkdsk reporting 65MB for the log is normal. It seems since Vista it always reports this. Any other cleaning/diagnostic tool you might know of? Edit: I ran several other tools since I first published the question: Seagate SeaTools (the HD manufacturer's analysis tool): complete test run OK. Intel Rapid 10.1 (the HD controller manufacturer's troubleshooting tool): the HD's ok. Microsoft Desktop Heap Monitor: Desktop Heap Information Monitor Tool (Version 8.1.2925.0) Copyright (c) Microsoft Corporation. All rights reserved. Session ID: 1 Total Desktop: ( 46464 KB - 11 desktops) WinStation\Desktop Heap Size(KB) Used Rate(%) WinSta0\Winlogon (s1) 128 3.6 WinSta0\Disconnect (s1) 64 3.8 WinSta0\Default (s1) 20480 3.0 msswindowstation\mssrestricteddesk (s0) 1024 0.2 __X78B95_89_IW__A8D9S1_42_ID (s0) 1024 0.2 Service-0x0-3e5$\Default (s0) 1024 0.6 Service-0x0-3e4$\Default (s0) 1024 0.3 Service-0x0-3e7$\Default (s0) 1024 2.1 WinSta0\Winlogon (s0) 128 1.9 WinSta0\Disconnect (s0) 64 3.8 WinSta0\Default (s0) 20480 0.0 All ok, desktop heap usage < 5% Edit 2: I tried totally resetting my account by creating a new one, logging under this new one and delete the first one (local rights and files), then logging back with this deleted account (it is a domain account). No luck. Also, I found out often the error is "not enough storage is available to process this command". Searching on the internet, I found an old troubleshooting tip (setting a registry key to raise the IRP stack limit, whatever it is) which did not change anything.

  Read the article

• What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

  - by Tegeril

  Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

  Read the article

• Oracle HRMS API – Rehire Employee

  - by PRajkumar

  API --  hr_employee_api.re_hire_ex_employee   Example -- Consider a Ex-Employee we will try to Rehire that employee using Rehire API     DECLARE      ln_per_object_version_number      PER_ALL_PEOPLE_F.OBJECT_VERSION_NUMBER%TYPE        := 5;      ln_assg_object_version_number    PER_ALL_ASSIGNMENTS_F.OBJECT_VERSION_NUMBER%TYPE;      ln_assignment_id                               PER_ALL_ASSIGNMENTS_F.ASSIGNMENT_ID%TYPE;      ld_per_effective_start_date              PER_ALL_PEOPLE_F.EFFECTIVE_START_DATE%TYPE;      ld_per_effective_end_date               PER_ALL_PEOPLE_F.EFFECTIVE_END_DATE%TYPE;      ln_assignment_sequence                  PER_ALL_ASSIGNMENTS_F.ASSIGNMENT_SEQUENCE%TYPE;      lb_assign_payroll_warning            BOOLEAN;      lc_assignment_number                     PER_ALL_ASSIGNMENTS_F.ASSIGNMENT_NUMBER%TYPE; BEGIN     -- Rehire Employee API      -- --------------------------------      hr_employee_api.re_hire_ex_employee      (    -- Input data elements           -- -----------------------------          p_hire_date                                          => TO_DATE('28-JUN-2011'),          p_person_id                                         => 32979,          p_rehire_reason                                  => NULL,          -- Output data elements          -- --------------------------------         p_assignment_id                                => ln_assignment_id,         p_per_object_version_number       => ln_per_object_version_number,         p_asg_object_version_number       => ln_assg_object_version_number,         p_per_effective_start_date               => ld_per_effective_start_date,         p_per_effective_end_date                => ld_per_effective_end_date,         p_assignment_sequence                  => ln_assignment_sequence,         p_assignment_number                     => lc_assignment_number,         p_assign_payroll_warning             => lb_assign_payroll_warning     );    COMMIT; EXCEPTION        WHEN OTHERS THEN                        ROLLBACK;                        dbms_output.put_line(SQLERRM); END; / SHOW ERR;  

  Read the article

• MvcExtensions – Bootstrapping

  - by kazimanzurrashid

  When you create a new ASP.NET MVC application you will find that the global.asax contains the following lines: namespace MvcApplication1 { // Note: For instructions on enabling IIS6 or IIS7 classic mode, // visit http://go.microsoft.com/?LinkId=9394801 public class MvcApplication : System.Web.HttpApplication { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } } } As the application grows, there are quite a lot of plumbing code gets into the global.asax which quickly becomes a design smell. Lets take a quick look at the code of one of the open source project that I recently visited: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute("Default","{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }); } protected override void OnApplicationStarted() { Error += OnError; EndRequest += OnEndRequest; var settings = new SparkSettings() .AddNamespace("System") .AddNamespace("System.Collections.Generic") .AddNamespace("System.Web.Mvc") .AddNamespace("System.Web.Mvc.Html") .AddNamespace("MvcContrib.FluentHtml") .AddNamespace("********") .AddNamespace("********.Web") .SetPageBaseType("ApplicationViewPage") .SetAutomaticEncoding(true); #if DEBUG settings.SetDebug(true); #endif var viewFactory = new SparkViewFactory(settings); ViewEngines.Engines.Add(viewFactory); #if !DEBUG PrecompileViews(viewFactory); #endif RegisterAllControllersIn("********.Web"); log4net.Config.XmlConfigurator.Configure(); RegisterRoutes(RouteTable.Routes); Factory.Load(new Components.WebDependencies()); ModelBinders.Binders.DefaultBinder = new Binders.GenericBinderResolver(Factory.TryGet<IModelBinder>); ValidatorConfiguration.Initialize("********"); HtmlValidationExtensions.Initialize(ValidatorConfiguration.Rules); } private void OnEndRequest(object sender, System.EventArgs e) { if (((HttpApplication)sender).Context.Handler is MvcHandler) { CreateKernel().Get<ISessionSource>().Close(); } } private void OnError(object sender, System.EventArgs e) { CreateKernel().Get<ISessionSource>().Close(); } protected override IKernel CreateKernel() { return Factory.Kernel; } private static void PrecompileViews(SparkViewFactory viewFactory) { var batch = new SparkBatchDescriptor(); batch.For<HomeController>().For<ManageController>(); viewFactory.Precompile(batch); } As you can see there are quite a few of things going on in the above code, Registering the ViewEngine, Compiling the Views, Registering the Routes/Controllers/Model Binders, Settings up Logger, Validations and as you can imagine the more it becomes complex the more things will get added in the application start. One of the goal of the MVCExtensions is to reduce the above design smell. Instead of writing all the plumbing code in the application start, it contains BootstrapperTask to register individual services. Out of the box, it contains BootstrapperTask to register Controllers, Controller Factory, Action Invoker, Action Filters, Model Binders, Model Metadata/Validation Providers, ValueProvideraFactory, ViewEngines etc and it is intelligent enough to automatically detect the above types and register into the ASP.NET MVC Framework. Other than the built-in tasks you can create your own custom task which will be automatically executed when the application starts. When the BootstrapperTasks are in action you will find the global.asax pretty much clean like the following: public class MvcApplication : UnityMvcApplication { public void ErrorLog_Filtering(object sender, ExceptionFilterEventArgs e) { Check.Argument.IsNotNull(e, "e"); HttpException exception = e.Exception.GetBaseException() as HttpException; if ((exception != null) && (exception.GetHttpCode() == (int)HttpStatusCode.NotFound)) { e.Dismiss(); } } } The above code is taken from my another open source project Shrinkr, as you can see the global.asax is longer cluttered with any plumbing code. One special thing you have noticed that it is inherited from the UnityMvcApplication rather than regular HttpApplication. There are separate version of this class for each IoC Container like NinjectMvcApplication, StructureMapMvcApplication etc. Other than executing the built-in tasks, the Shrinkr also has few custom tasks which gets executed when the application starts. For example, when the application starts, we want to ensure that the default users (which is specified in the web.config) are created. The following is the custom task that is used to create those default users: public class CreateDefaultUsers : BootstrapperTask { protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { IUserRepository userRepository = serviceLocator.GetInstance<IUserRepository>(); IUnitOfWork unitOfWork = serviceLocator.GetInstance<IUnitOfWork>(); IEnumerable<User> users = serviceLocator.GetInstance<Settings>().DefaultUsers; bool shouldCommit = false; foreach (User user in users) { if (userRepository.GetByName(user.Name) == null) { user.AllowApiAccess(ApiSetting.InfiniteLimit); userRepository.Add(user); shouldCommit = true; } } if (shouldCommit) { unitOfWork.Commit(); } return TaskContinuation.Continue; } } There are several other Tasks in the Shrinkr that we are also using which you will find in that project. To create a custom bootstrapping task you have create a new class which either implements the IBootstrapperTask interface or inherits from the abstract BootstrapperTask class, I would recommend to start with the BootstrapperTask as it already has the required code that you have to write in case if you choose the IBootstrapperTask interface. As you can see in the above code we are overriding the ExecuteCore to create the default users, the MVCExtensions is responsible for populating the  ServiceLocator prior calling this method and in this method we are using the service locator to get the dependencies that are required to create the users (I will cover the custom dependencies registration in the next post). Once the users are created, we are returning a special enum, TaskContinuation as the return value, the TaskContinuation can have three values Continue (default), Skip and Break. The reason behind of having this enum is, in some  special cases you might want to skip the next task in the chain or break the complete chain depending upon the currently running task, in those cases you will use the other two values instead of the Continue. The last thing I want to cover in the bootstrapping task is the Order. By default all the built-in tasks as well as newly created task order is set to the DefaultOrder(a static property), in some special cases you might want to execute it before/after all the other tasks, in those cases you will assign the Order in the Task constructor. For Example, in Shrinkr, we want to run few background services when the all the tasks are executed, so we assigned the order as DefaultOrder + 1. Here is the code of that Task: public class ConfigureBackgroundServices : BootstrapperTask { private IEnumerable<IBackgroundService> backgroundServices; public ConfigureBackgroundServices() { Order = DefaultOrder + 1; } protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { backgroundServices = serviceLocator.GetAllInstances<IBackgroundService>().ToList(); backgroundServices.Each(service => service.Start()); return TaskContinuation.Continue; } protected override void DisposeCore() { backgroundServices.Each(service => service.Stop()); } } That’s it for today, in the next post I will cover the custom service registration, so stay tuned.

  Read the article

• Start a Mapping or Process Flow from OWB Browser

  - by Dong Ruirong

  Basically, we start a Mapping or Process Flow from Oracle Warehouse Builder (OWB) Design Client. But actually we can also start a Mapping or Process Flow from OWB Browser. This paper will introduce the Start Report first and then introduce how to start/rerun a Mapping or Process Flow from OWB Browser. Start Report Start Report is used to start an execution of a Mapping or Process Flow. So there are two kinds of Start Report: Mapping Start Report (See Figure 1) and Process Flow Start Report (See Figure 2). Start Report shows the Mapping or Process Flow identification properties, including latest deployment and latest execution, lists all execution parameters for the Mapping or Process Flow, which were specified by the latest deployment, and assigns parameter default values from the latest deployment specification. You can do a couple of things from Start Report: Sort execution parameters on name, category. Table 1 lists all parameters of a Mapping. Table 2 lists all parameters of a Process Flow. Change values of any input parameter where permitted. For some parameters, selection lists are provided. For example, Mapping’s parameter Audit Level has a selection list. Reset all parameter settings to their default values. Apply basic validation to parameter values before starting an execution. Start the Mapping or Process Flow, which means it is executed immediately. Navigate to Deployment Report for latest deployment details of the Mapping or Process Flow. Navigate to Execution Job Report for latest execution of current Mapping or Process Flow Link to on-link help Warehouse Report Page, Deployment Report, Execution Report, Execution Schedule Report and Execution Summary Report. Figure 1 Mapping Start Report Table 1 Execution Parameters and default values for a Mapping Category Name Mode Input Value System Audit Level In Error Details System Bulk Size In 1000 System Commit Frequency In 1000 System EXECUTE_RESUME_TASK In FALSE System FORCE_RESUME_OPTION In FALSE System Max No of Errors In 50 System NUMBER_OF_TIMES_TO_RETRY In 2 System Operating Mode In Set Based Fail Over to Row Based System PARALLEL_LEVEL In 0 System Procedure Name In main System Purge Group In WB Figure 2 Process Flow Start Report Table 2 Execution Parameters and default values for a Process Flow Category Name Mode Input Value System EVAL_LOCATION In   System Item Key In-Out   System Item Type In PFPKG_1 Start a Mapping or Process Flow To navigate to Start Report, it’s better to login OWB Browser with Control Center option; if not, after logging in OWB Browser, go to Control Center first. Then you can follow the ways introduced in this section to navigate to Start Report. One more thing you need to pay attention to is that you are not allowed to deploy any Mappings and Process Flows from OWB Browser as it’s not supported. So it’s necessary to deploy the Mappings and Process Flows first before starting them from OWB Browser. If you have deployed a Mapping or Process Flow but have not started it, please navigate from Object Summary Report or Deployment Schedule Report to Start Report. 1. Navigating from Object Summary Report to Start Report Open the Object Summary Report to see all deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from Deployment Schedule Report to Start Report Open the Deployment Schedule Report to see deployment details of Mapping and Process Flow. Expand the project trees to find the deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. Re-run a Mapping or Process Flow If you have executed a Mapping or Process Flow, you can navigate from Object Summary Report, Deployment Schedule Report, Execution Summary Report or Execution Schedule Report to Start Report. 1. Navigating from the Execution Summary Report to Start Report Open the Execution Summary Report to see all execution jobs including Mapping jobs and Process Flow jobs. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from the Execution Schedule Report to Start Report Open the Execution Schedule Report to see list of all executions of Mapping and Process Flow. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. If the execution of a Mapping or Process Flow is successful, you will see this message from the Start Report: Start Execution request successful. (See Figure 3) Figure 3 Execution Result You can also confirm the execution of the Mapping or Process Flow by referring to Execution Report of the current Mapping or Process Flow by clicking the link in the Available Reports tab for the given Mapping or Process Flow. One new record of execution job details is added to Execution Report of the Mapping or Process Flow which shows the details of the execution such as Start Time, Elapsed Time, Status, the number of records selected, inserted, updated, deleted etc.

  Read the article

• I Hereby Resolve… (T-SQL Tuesday #14)

  - by smisner

  It’s time for another T-SQL Tuesday, hosted this month by Jen McCown (blog|twitter), on the topic of resolutions. Specifically, “what techie resolutions have you been pondering, and why?” I like that word – pondering – because I ponder a lot. And while there are many things that I do already because of my job, there are many more things that I ponder about doing…if only I had the time. Then I ponder about making time, but then it’s back to work! In 2010, I was moderately more successful in making time for things that I ponder about than I had been in years past, and I hope to continue that trend in 2011. If Jen hadn’t settled on this topic, I could keep my ponderings to myself and no one would ever know the outcome, but she’s egged me on (and everyone else that chooses to participate)! So here goes… For me, having resolve to do something means that I wouldn’t be doing that something as part of my ordinary routine. It takes extra effort to make time for it. It’s not something that I do once and check off a list, but something that I need to commit to over a period of time. So with that in mind, I hereby resolve… To Learn Something New… One of the things I love about my job is that I get to do a lot of things outside of my ordinary routine. It’s a veritable smorgasbord of opportunity! So what more could I possibly add to that list of things to do? Well, the more I learn, the more I realize I have so much more to learn. It would be much easier to remain in ignorant bliss, but I was born to learn. Constantly. (And apparently to teach, too– my father will tell you that as a small child, I had the neighborhood kids gathered together to play school – in the summer. I’m sure they loved that – but they did it!) These are some of things that I want to dedicate some time to learning this year: Spatial data. I have a good understanding of how maps in Reporting Services works, and I can cobble together a simple T-SQL spatial query, but I know I’m only scratching the surface here. Rob Farley (blog|twitter) posted interesting examples of combining maps and PivotViewer, and I think there’s so many more creative possibilities. I’ve always felt that pictures (including charts and maps) really help people get their minds wrapped around data better, and because a lot of data has a geographic aspect to it, I believe developing some expertise here will be beneficial to my work. PivotViewer. Not only is PivotViewer combined with maps a useful way to visualize data, but it’s an interesting way to work with data. If you haven’t seen it yet, check out this interactive demonstration using Netflx OData feed. According to Rob Farley, learning how to work with PivotViewer isn’t trivial. Just the type of challenge I like! Security. You’ve heard of the accidental DBA? Well, I am the accidental security person – is there a word for that role? My eyes used to glaze over when having to study about security, or  when reading anything about it. Then I had a problem long ago that no one could figure out – not even the vendor’s tech support – until I rolled up my sleeves and painstakingly worked through the myriad of potential problems to resolve a very thorny security issue. I learned a lot in the process, and have been able to share what I’ve learned with a lot of people. But I’m not convinced their eyes weren’t glazing over, too. I don’t take it personally – it’s just a very dry topic! So in addition to deepening my understanding about security, I want to find a way to make the subject as it relates to SQL Server and business intelligence more accessible and less boring. Well, there’s actually a lot more that I could put on this list, and a lot more things I have plans to do this coming year, but I run the risk of overcommitting myself. And then I wouldn’t have time… To Have Fun! My name is Stacia and I’m a workaholic. When I love what I do, it’s difficult to separate out the work time from the fun time. But there are some things that I’ve been meaning to do that aren’t related to business intelligence for which I really need to develop some resolve. And they are techie resolutions, too, in a roundabout sort of way! Photography. When my husband and I went on an extended camping trip in 2009 to Yellowstone and the Grand Tetons, I had a nice little digital camera that took decent pictures. But then I saw the gorgeous cameras that other tourists were toting around and decided I needed one too. So I bought a Nikon D90 and have started to learn to use it, but I’m definitely still in the beginning stages. I traveled so much in 2010 and worked on two book projects that I didn’t have a lot of free time to devote to it. I was very inspired by Kimberly Tripp’s (blog|twitter) and Paul Randal’s (blog|twitter) photo-adventure in Alaska, though, and plan to spend some dedicated time with my camera this year. (And hopefully before I move to Alaska – nothing set in stone yet, but we hope to move to a remote location – with Internet access – later this year!) Astronomy. I have this cool telescope, but it suffers the same fate as my camera. I have been gone too much and busy with other things that I haven’t had time to work with it. I’ll figure out how it works, and then so much time passes by that I forget how to use it. I have this crazy idea that I can actually put the camera and the telescope together for astrophotography, but I think I need to start simple by learning how to use each component individually. As long as I’m living in Las Vegas, I know I’ll have clear skies for nighttime viewing, but when we move to Alaska, we’ll be living in a rain forest. I have no idea what my opportunities will be like there – except I know that when the sky is clear, it will be far more amazing than anything I can see in Vegas – even out in the desert - because I’ll be so far away from city light pollution. I’ve been contemplating putting together a blog on these topics as I learn. As many of my fellow bloggers in the SQL Server community know, sometimes the best way to learn something is to sit down and write about it. I’m just stumped by coming up with a clever name for the new blog, which I was thinking about inaugurating with my move to Alaska. Except that I don’t know when that will be exactly, so we’ll just have to wait and see which comes first!

  Read the article

• So, how is the Oracle HCM Cloud User Experience? In a word, smokin’!

  - by Edith Mireles-Oracle

  By Misha Vaughan, Oracle Applications User Experience Oracle unveiled its game-changing cloud user experience strategy at Oracle OpenWorld 2013 (remember that?) with a new simplified user interface (UI) paradigm.  The Oracle HCM cloud user experience is about light-weight interaction, tailored to the task you are trying to accomplish, on the device you are comfortable working with. A key theme for the Oracle user experience is being able to move from smartphone to tablet to desktop, with all of your data in the cloud. The Oracle HCM Cloud user experience provides designs for better productivity, no matter when and how your employees need to work. Release 8  Oracle recently demonstrated how fast it is moving development forward for our cloud applications, with the availability of release 8.  In release 8, users will see expanded simplicity in the HCM cloud user experience, such as filling out a time card and succession planning. Oracle has also expanded its mobile capabilities with task flows for payslips, managing absences, and advanced analytics. In addition, users will see expanded extensibility with the new structures editor for simplified pages, and the with the user interface text editor, which allows you to update language throughout the UI from one place. If you don’t like calling people who work for you “employees,” you can use this tool to create a term that is suited to your business.  Take a look yourself at what’s available now. What are people saying?Debra Lilley (@debralilley), an Oracle ACE Director who has a long history with Oracle Applications, recently gave her perspective on release 8: “Having had the privilege of seeing a preview of release 8, I am again impressed with the enhancements around simplified UI. Even more so, at a user group event in London this week, an existing Cloud HCM customer speaking publically about his implementation said he was very excited about release 8 as the absence functionality was so superior and simple to use.”  In an interview with Lilley for a blog post by Dennis Howlett  (@dahowlett), we probably couldn’t have asked for a more even-handed look at the Oracle Applications Cloud and the impact of user experience. Take the time to watch all three videos and get the full picture.  In closing, Howlett’s said: “There is always the caveat that getting from the past to Fusion [from the editor: Fusion is now called the Oracle Applications Cloud] is not quite as simple as may be painted, but the outcomes are much better than anticipated in large measure because the user experience is so much better than what went before.” Herman Slange, Technical Manager with Oracle Applications partner Profource, agrees with that comment. “We use on-premise Financials & HCM for internal use. Having a simple user interface that works on a desktop as well as a tablet for (very) non-technical users is a big relief. Coming from E-Business Suite, there is less training (none) required to access HCM content.  From a technical point of view, having the abilities to tailor the simplified UI very easy makes it very efficient for us to adjust to specific customer needs.  When we have a conversation about simplified UI, we just hand over a tablet and ask the customer to just use it. No training and no explanation required.” Finally, in a story by Computer Weekly  about Oracle customer BG Group, a natural gas exploration and production company based in the UK and with a presence in 20 countries, the author states: “The new HR platform has proved to be easier and more intuitive for HR staff to use than the previous SAP-based technology.” What’s Next for Oracle’s Applications Cloud User Experiences? This is the question that Steve Miranda, Oracle Executive Vice President, Applications Development, asks the Applications User Experience team, and we’ve been hard at work for some time now on “what’s next.”  I can’t say too much about it, but I can tell you that we’ve started talking to customers and partners, under non-disclosure agreements, about user experience concepts that we are working on in order to get their feedback. We recently had a chance to talk about possibilities for the Oracle HCM Cloud user experience at an Oracle HCM Southern California Customer Success Summit. This was a fantastic event, hosted by Shane Bliss and Vance Morossi of the Oracle Client Success Team. We got to use the uber-slick facilities of Allergan, our hosts (of Botox fame), headquartered in Irvine, Calif., with a presence in more than 100 countries. Photo by Misha Vaughan, Oracle Applications User Experience Vance Morossi, left, and Shane Bliss, of the Oracle Client Success Team, at an Oracle HCM Southern California Customer Success Summit.  We were treated to a few really excellent talks around human resources (HR). Alice White, VP Human Resources, discussed Allergan's process for global talent acquisition -- how Allergan has designed and deployed a global process, and global tools, along with Oracle and Cognizant, and are now at the end of a global implementation. She shared a couple of insights about the journey for Allergan: “One of the major areas for improvement was on role clarification within the company.” She said the company is “empowering managers and deputizing them as recruiters. Now it is a global process that is nimble and efficient."  Deepak Rammohan, VP Product Management, HCM Cloud, Oracle, also took the stage to talk about pioneering modern HR. He reflected modern HR problems of getting the right data about the workforce, the importance of getting the right talent as a key strategic initiative, and other workforce insights. "How do we design systems to deal with all of this?” he asked. “Make sure the systems are talent-centric. The next piece is collaborative, engaging, and mobile. A lot of this is influenced by what users see today. The last thing is around insight; insight at the point of decision-making." Rammohan showed off some killer HCM Cloud talent demos focused on simplicity and mobility that his team has been cooking up, and closed with a great line about the nature of modern recruiting: "Recruiting is a team sport." Deepak Rammohan, left, and Jake Kuramoto, both of Oracle, debate the merits of a Google Glass concept demo for recruiters on-the-go. Later, in an expo-style format, the Apps UX team showed several concepts for next-generation HCM Cloud user experiences, including demos shown by Jake Kuramoto (@jkuramoto) of The AppsLab, and Aylin Uysal (@aylinuysal), Director, HCM Cloud user experience. We even hauled out our eye-tracker, a research tool used to show where the eye is looking at a particular screen, thanks to teammate Michael LaDuke. Dionne Healy, HCM Client Executive, and Aylin Uysal, Director, HCM Cloud user experiences, Oracle, take a look at new HCM Cloud UX concepts. We closed the day with Jeremy Ashley (@jrwashley), VP, Applications User Experience, who brought it all back together by talking about the big picture for applications cloud user experiences. He covered the trends we are paying attention to now, what users will be expecting of their modern enterprise apps, and what Oracle’s design strategy is around these ideas.   We closed with an excellent reception hosted by ADP Payroll services at Bistango. Want to read more?Want to see where our cloud user experience is going next? Read more on the UsableApps web site about our latest design initiative: “Glance, Scan, Commit.” Or catch up on the back story by looking over our Applications Cloud user experience content on the UsableApps web site.  You can also find out where we’ll be next at the Events page on UsableApps.

  Read the article

• MySQL – Scalability on Amazon RDS: Scale out to multiple RDS instances

  - by Pinal Dave

  Today, I’d like to discuss getting better MySQL scalability on Amazon RDS. The question of the day: “What can you do when a MySQL database needs to scale write-intensive workloads beyond the capabilities of the largest available machine on Amazon RDS?” Let’s take a look. In a typical EC2/RDS set-up, users connect to app servers from their mobile devices and tablets, computers, browsers, etc.  Then app servers connect to an RDS instance (web/cloud services) and in some cases they might leverage some read-only replicas.   Figure 1. A typical RDS instance is a single-instance database, with read replicas.  This is not very good at handling high write-based throughput. As your application becomes more popular you can expect an increasing number of users, more transactions, and more accumulated data.  User interactions can become more challenging as the application adds more sophisticated capabilities. The result of all this positive activity: your MySQL database will inevitably begin to experience scalability pressures. What can you do? Broadly speaking, there are four options available to improve MySQL scalability on RDS. 1. Larger RDS Instances – If you’re not already using the maximum available RDS instance, you can always scale up – to larger hardware.  Bigger CPUs, more compute power, more memory et cetera. But the largest available RDS instance is still limited.  And they get expensive. “High-Memory Quadruple Extra Large DB Instance”: 68 GB of memory 26 ECUs (8 virtual cores with 3.25 ECUs each) 64-bit platform High I/O Capacity Provisioned IOPS Optimized: 1000Mbps 2. Provisioned IOPs – You can get provisioned IOPs and higher throughput on the I/O level. However, there is a hard limit with a maximum instance size and maximum number of provisioned IOPs you can buy from Amazon and you simply cannot scale beyond these hardware specifications. 3. Leverage Read Replicas – If your application permits, you can leverage read replicas to offload some reads from the master databases. But there are a limited number of replicas you can utilize and Amazon generally requires some modifications to your existing application. And read-replicas don’t help with write-intensive applications. 4. Multiple Database Instances – Amazon offers a fourth option: “You can implement partitioning,thereby spreading your data across multiple database Instances” (Link) However, Amazon does not offer any guidance or facilities to help you with this. “Multiple database instances” is not an RDS feature.  And Amazon doesn’t explain how to implement this idea. In fact, when asked, this is the response on an Amazon forum: Q: Is there any documents that describe the partition DB across multiple RDS? I need to use DB with more 1TB but exist a limitation during the create process, but I read in the any FAQ that you need to partition database, but I don’t find any documents that describe it. A: “DB partitioning/sharding is not an official feature of Amazon RDS or MySQL, but a technique to scale out database by using multiple database instances. The appropriate way to split data depends on the characteristics of the application or data set. Therefore, there is no concrete and specific guidance.” So now what? The answer is to scale out with ScaleBase. Amazon RDS with ScaleBase: What you get – MySQL Scalability! ScaleBase is specifically designed to scale out a single MySQL RDS instance into multiple MySQL instances. Critically, this is accomplished with no changes to your application code.  Your application continues to “see” one database.   ScaleBase does all the work of managing and enforcing an optimized data distribution policy to create multiple MySQL instances. With ScaleBase, data distribution, transactions, concurrency control, and two-phase commit are all 100% transparent and 100% ACID-compliant, so applications, services and tooling continue to interact with your distributed RDS as if it were a single MySQL instance. The result: now you can cost-effectively leverage multiple MySQL RDS instance to scale out write-intensive workloads to an unlimited number of users, transactions, and data. Amazon RDS with ScaleBase: What you keep – Everything! And how does this change your Amazon environment? 1. Keep your application, unchanged – There is no change your application development life-cycle at all.  You still use your existing development tools, frameworks and libraries.  Application quality assurance and testing cycles stay the same. And, critically, you stay with an ACID-compliant MySQL environment. 2. Keep your RDS value-added services – The value-added services that you rely on are all still available. Amazon will continue to handle database maintenance and updates for you. You can still leverage High Availability via Multi A-Z.  And, if it benefits youra application throughput, you can still use read replicas. 3. Keep your RDS administration – Finally the RDS monitoring and provisioning tools you rely on still work as they did before. With your one large MySQL instance, now split into multiple instances, you can actually use less expensive, smallersmaller available RDS hardware and continue to see better database performance. Conclusion Amazon RDS is a tremendous service, but it doesn’t offer solutions to scale beyond a single MySQL instance. Larger RDS instances get more expensive.  And when you max-out on the available hardware, you’re stuck.  Amazon recommends scaling out your single instance into multiple instances for transaction-intensive apps, but offers no services or guidance to help you. This is where ScaleBase comes in to save the day. It gives you a simple and effective way to create multiple MySQL RDS instances, while removing all the complexities typically caused by “DIY” sharding andwith no changes to your applications . With ScaleBase you continue to leverage the AWS/RDS ecosystem: commodity hardware and value added services like read replicas, multi A-Z, maintenance/updates and administration with monitoring tools and provisioning. SCALEBASE ON AMAZON If you’re curious to try ScaleBase on Amazon, it can be found here – Download NOW. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• CI Deployment Of Azure Web Roles Using TeamCity

  - by srkirkland

  After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

  Read the article

• How to archive data from a table to a local or remote database in SQL 2005 and SQL 2008

  - by simonsabin

  Often you have the need to archive data from a table. This leads to a number of challenges 1. How can you do it without impacting users 2. How can I make it transactionally consistent, i.e. the data I put in the archive is the data I remove from the main table 3. How can I get it to perform well Points 1 is very much tied to point 3. If it doesn't perform well then the delete of data is going to cause lots of locks and thus potentially blocking. For points 1 and 3 refer to my previous posts DELETE-TOP-x-rows-avoiding-a-table-scan and UPDATE-and-DELETE-TOP-and-ORDER-BY---Part2. In essence you need to be removing small chunks of data from your table and you want to do that avoiding a table scan. So that deals with the delete approach but archiving is about inserting that data somewhere else. Well in SQL 2008 they introduced a new feature INSERT over DML (Data Manipulation Language, i.e. SQL statements that change data), or composable DML. The ability to nest DML statements within themselves, so you can past the results of an insert to an update to a merge. I've mentioned this before here SQL-Server-2008---MERGE-and-optimistic-concurrency. This feature is currently limited to being able to consume the results of a DML statement in an INSERT statement. There are many restrictions which you can find here http://msdn.microsoft.com/en-us/library/ms177564.aspx look for the section "Inserting Data Returned From an OUTPUT Clause Into a Table" Even with the restrictions what we can do is consume the OUTPUT from a DELETE and INSERT the results into a table in another database. Note that in BOL it refers to not being able to use a remote table, remote means a table on another SQL instance. To show this working use this SQL to setup two databases foo and fooArchive create database foo go --create the source table fred in database foo select * into foo..fred from sys.objects go create database fooArchive go if object_id('fredarchive',DB_ID('fooArchive')) is null begin     select getdate() ArchiveDate,* into fooArchive..FredArchive from sys.objects where 1=2       end go And then we can use this simple statement to archive the data insert into fooArchive..FredArchive select getdate(),d.* from (delete top (1)         from foo..Fred         output deleted.*) d         go In this statement the delete can be any delete statement you wish so if you are deleting by ids or a range of values then you can do that. Refer to the DELETE-TOP-x-rows-avoiding-a-table-scan post to ensure that your delete is going to perform. The last thing you want to do is to perform 100 deletes each with 5000 records for each of those deletes to do a table scan. For a solution that works for SQL2005 or if you want to archive to a different server then you can use linked servers or SSIS. This example shows how to do it with linked servers. [ONARC-LAP03] is the source server. begin transaction insert into fooArchive..FredArchive select getdate(),d.* from openquery ([ONARC-LAP03],'delete top (1)                     from foo..Fred                     output deleted.*') d commit transaction and to prove the transactions work try, you should get the same number of records before and after. select (select count(1) from foo..Fred) fred        ,(select COUNT(1) from fooArchive..FredArchive ) fredarchive   begin transaction insert into fooArchive..FredArchive select getdate(),d.* from openquery ([ONARC-LAP03],'delete top (1)                     from foo..Fred                     output deleted.*') d rollback transaction   select (select count(1) from foo..Fred) fred        ,(select COUNT(1) from fooArchive..FredArchive ) fredarchive The transactions are very important with this solution. Look what happens when you don't have transactions and an error occurs   select (select count(1) from foo..Fred) fred        ,(select COUNT(1) from fooArchive..FredArchive ) fredarchive   insert into fooArchive..FredArchive select getdate(),d.* from openquery ([ONARC-LAP03],'delete top (1)                     from foo..Fred                     output deleted.*                     raiserror (''Oh doo doo'',15,15)') d                     select (select count(1) from foo..Fred) fred        ,(select COUNT(1) from fooArchive..FredArchive ) fredarchive Before running this think what the result would be. I got it wrong. What seems to happen is that the remote query is executed as a transaction, the error causes that to rollback. However the results have already been sent to the client and so get inserted into the

  Read the article

• Windows Azure Evolution &ndash; Deploy Web Sites (WAWS Part 3)

  - by Shaun

  This is the sixth post of my Windows Azure Evolution series. After talked a bit about the new caching preview feature in the previous one, let’s back to the Windows Azure Web Sites (WAWS).   Git and GitHub Integration In the third post I introduced the overview functionality of WAWS and demonstrated how to create a WordPress blog through the build-in application gallery. And in the fourth post I covered how to use the TFS service preview to deploy an ASP.NET MVC application to the web site through the TFS integration. WAWS also have the Git integration. I’m not going to talk very detailed about the Git and GitHub integration since there are a bunch of information on the internet you can refer to. To enable the Git just go to the web site item in the developer portal and click the “Set up Git publishing”. After specified the username and password the windows azure platform will establish the Git integration and provide some basic guide. As you can see, you can download the Git binaries, commit the files and then push to the remote repository. Regarding the GitHub, since it’s built on top of Git it should work. Maarten Balliauw have a wonderful post about how to integrate GitHub to Windows Azure Web Site you can find here.   WebMatrix 2 RC WebMatrix is a lightweight web application development tool provided by Microsoft. It utilizes WebDeploy or FTP to deploy the web application to the server. And in WebMatrix 2.0 RC it added the feature to work with Windows Azure. First of all we need to download the latest WebMatrix 2 through the Web Platform Installer 4.0. Just open the WebPI and search “WebMatrix”, or go to its home page download its web installer. Once we have WebMatrix 2, we need to download the publish file of our WAWS. Let’s go to the developer portal and open the web site we want to deploy and download the publish file from the link on the right hand side. This file contains the necessary information of publishing the web site through WebDeploy and FTP, which can be used in WebMatrix, Visual Studio, etc.. Once we have the publish file we can open the WebMatrix, click the Open Site, Remote Site. Then it will bring up a dialog where we can input the information of the remote site. Since we have our publish file already, we can click the “Import publish settings” and select the publish file, then we can see the site information will be populated automatically. Click OK, the WebMatrix will connect to the remote site, which is the WAWS we had deployed already, retrieve the folders and files information. We can open files in WebMatrix and modify. But since WebMatrix is a lightweight web application tool, we cannot update the backend C# code. So in this case, we will modify the frontend home page only. After saved our modification, WebMatrix will compare the files between in local and remote and then it will only upload the modified files to Windows Azure through the connection information in the publish file. Since it only update the files which were changed, this minimized the bandwidth and deployment duration. After few seconds we back to the website and the modification had been applied.   Visual Studio and WebDeploy The publish file we had downloaded can be used not only in WebMatrix but also Visual Studio. As we know in Visual Studio we can publish a web application by clicking the “Publish” item from the project context menu in the solution explorer, and we can specify the WebDeploy, FTP or File System for the publish target. Now we can use the WAWS publish file to let Visual Studio publish the web application to WAWS. Let’s create a new ASP.NET MVC Web Application in Visual Studio 2010 and then click the “Publish” in solution explorer. Once we have the Windows Azure SDK 1.7 installed, it will update the web application publish dialog. So now we can import the publish information from the publish file. Select WebDeploy as the publish method. We can select FTP as well, which is supported by Windows Azure and the FTP information was in the same publish file. In the last step the publish wizard can check the files which will be uploaded to the remote site before the actually publishing. This gives us a chance to review and amend the files. Same as the WebMatrix, Visual Studio will compare the files between local and WAWS and determined which had been changed and need to be published. Finally Visual Studio will publish the web application to windows azure through WebDeploy protocol. Once it finished we can browse our website.   FTP Deployment The publish file we downloaded contains the connection information to our web site via both WebDeploy and FTP. When using WebMatrix and Visual Studio we can select WebDeploy or FTP. WebDeploy method can be used very easily from WebMatrix and Visual Studio, with the file compare feature. But the FTP gives more flexibility. We can use any FTP client to upload files to windows azure regardless which client and OS we are using. Open the publish file in any text editor, we can find the connection information very easily. As you can see the publish file is actually a XML file with WebDeploy and FTP information in plain text attributes. And once we have the FTP URL, username and password, when can connect to the site and upload and download files. For example I opened FileZilla and connected to my WAWS through FTP. Then I can download files I am interested in and modify them on my local disk. Then upload back to windows azure through FileZilla. Then I can see the new page.   Summary In this simple and quick post I introduced vary approaches to deploy our web application to Windows Azure Web Site. It supports TFS integration which I mentioned previously. It also supports Git and GitHub, WebDeploy and FTP as well.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• MySQL Cluster 7.3 Labs Release – Foreign Keys Are In!

  - by Mat Keep

  0 0 1 1097 6254 Homework 52 14 7337 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Summary (aka TL/DR): Support for Foreign Key constraints has been one of the most requested feature enhancements for MySQL Cluster. We are therefore extremely excited to announce that Foreign Keys are part of the first Labs Release of MySQL Cluster 7.3 – available for download, evaluation and feedback now! (Select the mysql-cluster-7.3-labs-June-2012 build) In this blog, I will attempt to discuss the design rationale, implementation, configuration and steps to get started in evaluating the first MySQL Cluster 7.3 Labs Release. Pace of Innovation It was only a couple of months ago that we announced the General Availability (GA) of MySQL Cluster 7.2, delivering 1 billion Queries per Minute, with 70x higher cross-shard JOIN performance, Memcached NoSQL key-value API and cross-data center replication.  This release has been a huge hit, with downloads and deployments quickly reaching record levels. The announcement of the first MySQL Cluster 7.3 Early Access lab release at today's MySQL Innovation Day event demonstrates the continued pace in Cluster development, and provides an opportunity for the community to evaluate and feedback on new features they want to see. What’s the Plan for MySQL Cluster 7.3? Well, Foreign Keys, as you may have gathered by now (!), and this is the focus of this first Labs Release. As with MySQL Cluster 7.2, we plan to publish a series of preview releases for 7.3 that will incrementally add new candidate features for a final GA release (subject to usual safe harbor statement below*), including: - New NoSQL APIs; - Features to automate the configuration and provisioning of multi-node clusters, on premise or in the cloud; - Performance and scalability enhancements; - Taking advantage of features in the latest MySQL 5.x Server GA. Design Rationale MySQL Cluster is designed as a “Not-Only-SQL” database. It combines attributes that enable users to blend the best of both relational and NoSQL technologies into solutions that deliver web scalability with 99.999% availability and real-time performance, including: Concurrent NoSQL and SQL access to the database; Auto-sharding with simple scale-out across commodity hardware; Multi-master replication with failover and recovery both within and across data centers; Shared-nothing architecture with no single point of failure; Online scaling and schema changes; ACID compliance and support for complex queries, across shards. Native support for Foreign Key constraints enables users to extend the benefits of MySQL Cluster into a broader range of use-cases, including: - Packaged applications in areas such as eCommerce and Web Content Management that prescribe databases with Foreign Key support. - In-house developments benefiting from Foreign Key constraints to simplify data models and eliminate the additional application logic needed to maintain data consistency and integrity between tables. Implementation The Foreign Key functionality is implemented directly within MySQL Cluster’s data nodes, allowing any client API accessing the cluster to benefit from them – whether using SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA or HTTP/REST.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation. An important difference to note with the Foreign Key implementation in InnoDB is that MySQL Cluster does not support the updating of Primary Keys from within the Data Nodes themselves - instead the UPDATE is emulated with a DELETE followed by an INSERT operation. Therefore an UPDATE operation will return an error if the parent reference is using a Primary Key, unless using CASCADE action, in which case the delete operation will result in the corresponding rows in the child table being deleted. The Engineering team plans to change this behavior in a subsequent preview release. Also note that when using InnoDB "NO ACTION" is identical to "RESTRICT". In the case of MySQL Cluster “NO ACTION” means “deferred check”, i.e. the constraint is checked before commit, allowing user-defined triggers to automatically make changes in order to satisfy the Foreign Key constraints. Configuration There is nothing special you have to do here – Foreign Key constraint checking is enabled by default. If you intend to migrate existing tables from another database or storage engine, for example from InnoDB, there are a couple of best practices to observe: 1. Analyze the structure of the Foreign Key graph and run the ALTER TABLE ENGINE=NDB in the correct sequence to ensure constraints are enforced 2. Alternatively drop the Foreign Key constraints prior to the import process and then recreate when complete. Getting Started Read this blog for a demonstration of using Foreign Keys with MySQL Cluster.  You can download MySQL Cluster 7.3 Labs Release with Foreign Keys today - (select the mysql-cluster-7.3-labs-June-2012 build) If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3) Post any questions to the MySQL Cluster forum where our Engineering team will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section of this blog. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. This first Labs Release of MySQL Cluster 7.3 gives you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases. * Safe Harbor Statement This information is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

  Read the article

• Service Broker, not ETL

  - by jamiet

  I have been very quiet on this blog of late and one reason for that is I have been very busy on a client project that I would like to talk about a little here. The client that I have been working for has a website that runs on a distributed architecture utilising a messaging infrastructure for communication between different endpoints. My brief was to build a system that could consume these messages and produce analytical information in near-real-time. More specifically I basically had to deliver a data warehouse however it was the real-time aspect of the project that really intrigued me. This real-time requirement meant that using an Extract transformation, Load (ETL) tool was out of the question and so I had no choice but to write T-SQL code (i.e. stored-procedures) to process the incoming messages and load the data into the data warehouse. This concerned me though – I had no way to control the rate at which data would arrive into the system yet we were going to have end-users querying the system at the same time that those messages were arriving; the potential for contention in such a scenario was pretty high and and was something I wanted to minimise as much as possible. Moreover I did not want the processing of data inside the data warehouse to have any impact on the customer-facing website. As you have probably guessed from the title of this blog post this is where Service Broker stepped in! For those that have not heard of it Service Broker is a queuing technology that has been built into SQL Server since SQL Server 2005. It provides a number of features however the one that was of interest to me was the fact that it facilitates asynchronous data processing which, in layman’s terms, means the ability to process some data without requiring the system that supplied the data having to wait for the response. That was a crucial feature because on this project the customer-facing website (in effect an OLTP system) would be calling one of our stored procedures with each message – we did not want to cause the OLTP system to wait on us every time we processed one of those messages. This asynchronous nature also helps to alleviate the contention problem because the asynchronous processing activity is handled just like any other task in the database engine and hence can wait on another task (such as an end-user query). Service Broker it was then! The stored procedure called by the OLTP system would simply put the message onto a queue and we would use a feature called activation to pick each message off the queue in turn and process it into the warehouse. At the time of writing the system is not yet up to full capacity but so far everything seems to be working OK (touch wood) and crucially our users are seeing data in near-real-time. By near-real-time I am talking about latencies of a few minutes at most and to someone like me who is used to building systems that have overnight latencies that is a huge step forward! So then, am I advocating that you all go out and dump your ETL tools? Of course not, no! What this project has taught me though is that in certain scenarios there may be better ways to implement a data warehouse system then the traditional “load data in overnight” approach that we are all used to. Moreover I have really enjoyed getting to grips with a new technology and even if you don’t want to use Service Broker you might want to consider asynchronous messaging architectures for your BI/data warehousing solutions in the future. This has been a very high level overview of my use of Service Broker and I have deliberately left out much of the minutiae of what has been a very challenging implementation. Nonetheless I hope I have caused you to reflect upon your own approaches to BI and question whether other approaches may be more tenable. All comments and questions gratefully received! Lastly, if you have never used Service Broker before and want to kick the tyres I have provided below a very simple “Service Broker Hello World” script that will create all of the objects required to facilitate Service Broker communications and then send the message “Hello World” from one place to anther! This doesn’t represent a “proper” implementation per se because it doesn’t close down down conversation objects (which you should always do in a real-world scenario) but its enough to demonstrate the capabilities! @Jamiet ----------------------------------------------------------------------------------------------- /*This is a basic Service Broker Hello World app. Have fun! -Jamie */ USE MASTER GO CREATE DATABASE SBTest GO --Turn Service Broker on! ALTER DATABASE SBTest SET ENABLE_BROKER GO USE SBTest GO -- 1) we need to create a message type. Note that our message type is -- very simple and allowed any type of content CREATE MESSAGE TYPE HelloMessage VALIDATION = NONE GO -- 2) Once the message type has been created, we need to create a contract -- that specifies who can send what types of messages CREATE CONTRACT HelloContract (HelloMessage SENT BY INITIATOR) GO --We can query the metadata of the objects we just created SELECT * FROM   sys.service_message_types WHERE name = 'HelloMessage'; SELECT * FROM   sys.service_contracts WHERE name = 'HelloContract'; SELECT * FROM   sys.service_contract_message_usages WHERE  service_contract_id IN (SELECT service_contract_id FROM sys.service_contracts WHERE name = 'HelloContract') AND        message_type_id IN (SELECT message_type_id FROM sys.service_message_types WHERE name = 'HelloMessage'); -- 3) The communication is between two endpoints. Thus, we need two queues to -- hold messages CREATE QUEUE SenderQueue CREATE QUEUE ReceiverQueue GO --more querying metatda SELECT * FROM sys.service_queues WHERE name IN ('SenderQueue','ReceiverQueue'); --we can also select from the queues as if they were tables SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   -- 4) Create the required services and bind them to be above created queues CREATE SERVICE Sender   ON QUEUE SenderQueue CREATE SERVICE Receiver   ON QUEUE ReceiverQueue (HelloContract) GO --more querying metadata SELECT * FROM sys.services WHERE name IN ('Receiver','Sender'); -- 5) At this point, we can begin the conversation between the two services by -- sending messages DECLARE @conversationHandle UNIQUEIDENTIFIER DECLARE @message NVARCHAR(100) BEGIN   BEGIN TRANSACTION;   BEGIN DIALOG @conversationHandle         FROM SERVICE Sender         TO SERVICE 'Receiver'         ON CONTRACT HelloContract WITH ENCRYPTION=OFF   -- Send a message on the conversation   SET @message = N'Hello, World';   SEND  ON CONVERSATION @conversationHandle         MESSAGE TYPE HelloMessage (@message)   COMMIT TRANSACTION END GO --check contents of queues SELECT * FROM SenderQueue   SELECT * FROM ReceiverQueue   GO -- Receive a message from the queue RECEIVE CONVERT(NVARCHAR(MAX), message_body) AS MESSAGE FROM ReceiverQueue GO --If no messages were received and/or you can't see anything on the queues you may wish to check the following for clues: SELECT * FROM sys.transmission_queue -- Cleanup DROP SERVICE Sender DROP SERVICE Receiver DROP QUEUE SenderQueue DROP QUEUE ReceiverQueue DROP CONTRACT HelloContract DROP MESSAGE TYPE HelloMessage GO USE MASTER GO DROP DATABASE SBTest GO

  Read the article

• tile_static, tile_barrier, and tiled matrix multiplication with C++ AMP

  - by Daniel Moth

  We ended the previous post with a mechanical transformation of the C++ AMP matrix multiplication example to the tiled model and in the process introduced tiled_index and tiled_grid. This is part 2. tile_static memory You all know that in regular CPU code, static variables have the same value regardless of which thread accesses the static variable. This is in contrast with non-static local variables, where each thread has its own copy. Back to C++ AMP, the same rules apply and each thread has its own value for local variables in your lambda, whereas all threads see the same global memory, which is the data they have access to via the array and array_view. In addition, on an accelerator like the GPU, there is a programmable cache, a third kind of memory type if you'd like to think of it that way (some call it shared memory, others call it scratchpad memory). Variables stored in that memory share the same value for every thread in the same tile. So, when you use the tiled model, you can have variables where each thread in the same tile sees the same value for that variable, that threads from other tiles do not. The new storage class for local variables introduced for this purpose is called tile_static. You can only use tile_static in restrict(direct3d) functions, and only when explicitly using the tiled model. What this looks like in code should be no surprise, but here is a snippet to confirm your mental image, using a good old regular C array // each tile of threads has its own copy of locA, // shared among the threads of the tile tile_static float locA[16][16]; Note that tile_static variables are scoped and have the lifetime of the tile, and they cannot have constructors or destructors. tile_barrier In amp.h one of the types introduced is tile_barrier. You cannot construct this object yourself (although if you had one, you could use a copy constructor to create another one). So how do you get one of these? You get it, from a tiled_index object. Beyond the 4 properties returning index objects, tiled_index has another property, barrier, that returns a tile_barrier object. The tile_barrier class exposes a single member, the method wait. 15: // Given a tiled_index object named t_idx 16: t_idx.barrier.wait(); 17: // more code …in the code above, all threads in the tile will reach line 16 before a single one progresses to line 17. Note that all threads must be able to reach the barrier, i.e. if you had branchy code in such a way which meant that there is a chance that not all threads could reach line 16, then the code above would be illegal. Tiled Matrix Multiplication Example – part 2 So now that we added to our understanding the concepts of tile_static and tile_barrier, let me obfuscate rewrite the matrix multiplication code so that it takes advantage of tiling. Before you start reading this, I suggest you get a cup of your favorite non-alcoholic beverage to enjoy while you try to fully understand the code. 01: void MatrixMultiplyTiled(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W) 02: { 03: static const int TS = 16; 04: array_view<const float,2> a(M, W, vA); 05: array_view<const float,2> b(W, N, vB); 06: array_view<writeonly<float>,2> c(M,N,vC); 07: parallel_for_each(c.grid.tile< TS, TS >(), 08: [=] (tiled_index< TS, TS> t_idx) restrict(direct3d) 09: { 10: int row = t_idx.local[0]; int col = t_idx.local[1]; 11: float sum = 0.0f; 12: for (int i = 0; i < W; i += TS) { 13: tile_static float locA[TS][TS], locB[TS][TS]; 14: locA[row][col] = a(t_idx.global[0], col + i); 15: locB[row][col] = b(row + i, t_idx.global[1]); 16: t_idx.barrier.wait(); 17: for (int k = 0; k < TS; k++) 18: sum += locA[row][k] * locB[k][col]; 19: t_idx.barrier.wait(); 20: } 21: c[t_idx.global] = sum; 22: }); 23: } Notice that all the code up to line 9 is the same as per the changes we made in part 1 of tiling introduction. If you squint, the body of the lambda itself preserves the original algorithm on lines 10, 11, and 17, 18, and 21. The difference being that those lines use new indexing and the tile_static arrays; the tile_static arrays are declared and initialized on the brand new lines 13-15. On those lines we copy from the global memory represented by the array_view objects (a and b), to the tile_static vanilla arrays (locA and locB) – we are copying enough to fit a tile. Because in the code that follows on line 18 we expect the data for this tile to be in the tile_static storage, we need to synchronize the threads within each tile with a barrier, which we do on line 16 (to avoid accessing uninitialized memory on line 18). We also need to synchronize the threads within a tile on line 19, again to avoid the race between lines 14, 15 (retrieving the next set of data for each tile and overwriting the previous set) and line 18 (not being done processing the previous set of data). Luckily, as part of the awesome C++ AMP debugger in Visual Studio there is an option that helps you find such races, but that is a story for another blog post another time. May I suggest reading the next section, and then coming back to re-read and walk through this code with pen and paper to really grok what is going on, if you haven't already? Cool. Why would I introduce this tiling complexity into my code? Funny you should ask that, I was just about to tell you. There is only one reason we tiled our extent, had to deal with finding a good tile size, ensure the number of threads we schedule are correctly divisible with the tile size, had to use a tiled_index instead of a normal index, and had to understand tile_barrier and to figure out where we need to use it, and double the size of our lambda in terms of lines of code: the reason is to be able to use tile_static memory. Why do we want to use tile_static memory? Because accessing tile_static memory is around 10 times faster than accessing the global memory on an accelerator like the GPU, e.g. in the code above, if you can get 150GB/second accessing data from the array_view a, you can get 1500GB/second accessing the tile_static array locA. And since by definition you are dealing with really large data sets, the savings really pay off. We have seen tiled implementations being twice as fast as their non-tiled counterparts. Now, some algorithms will not have performance benefits from tiling (and in fact may deteriorate), e.g. algorithms that require you to go only once to global memory will not benefit from tiling, since with tiling you already have to fetch the data once from global memory! Other algorithms may benefit, but you may decide that you are happy with your code being 150 times faster than the serial-version you had, and you do not need to invest to make it 250 times faster. Also algorithms with more than 3 dimensions, which C++ AMP supports in the non-tiled model, cannot be tiled. Also note that in future releases, we may invest in making the non-tiled model, which already uses tiling under the covers, go the extra step and use tile_static memory on your behalf, but it is obviously way to early to commit to anything like that, and we certainly don't do any of that today. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >