Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 98/239 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Laptops with easy heat sink service?

  - by Niten

  Can you recommend a current laptop model with easy heat sink access – or better yet, a removable air intake filter – making it easy to periodically clean out the dust and lint that always packs up in these things? Every laptop I've owned has eventually overheated on account of a clogged heat sink. (I suppose it doesn't help that I have a cat who loves to hang out where I'm working, or that my laptop is almost always running.) One of the things I really love about my current system, a Dell Inspiron 1420n, is how easy it is to service its cooling system: whenever I notice the fan starting to work harder and the CPU temperature climbing higher than it should be, I merely have to unscrew a single panel from the bottom of the machine, clean out the heat sink, and then I'm good for another few months. Which current models of the "business laptop" variety offer similar easy cooling system service? I'm looking for something roughly along the lines of: 14- or 15-inch display Nehalem-based CPU Solid construction – magnesium chassis or better (like the Inspiron) TPM (for BitLocker) ideal, but not mandatory Docking adapter ideal, but not mandatory Good battery life For example, the ThinkPad T410 would have been my top choice, but it seems like it would be a serious chore to service its heat sink. For the current MacBook Pros it looks downright impossible. No matter how nice the laptop is in other respects, it'll be of no use to me when it's overheating. So, any suggestions? Thanks in advance... (I'm constantly surprised that customers and manufacturers don't pay more attention to this feature, at least in the business laptop subcategory. In the last couple months I've fixed two friends' laptops which were also overheating due to clogged cooling systems; clearly I'm not the only one affected by this.)

  Read the article

• I must clear my cmos to be able to boot

  - by Fredou

  I have this Asus p7p55d-e pro for about 8 months(got it last July) and for this last 3-4 days I cannot boot without clearing my CMOS what I have is: Seasonic M12D 750W ASUS P7P55D-E Pro Intel Core i5 760 Quad Core Processor Lynnfield LGA1156 XFX GeForce® 8800 GT Alpha Dog 512MB DDR3 Standard (PV-T88P-YDF4) 2x Corsair XMS3 CMX4GX3M2A1600C7 4GB DDR3 2X2GB DDR3-1600 CL 7-8-7-20 I tried to remove all the unnecessary stuff: HD/dvd/pci card/usb cable/etc I tried with only 1 dimm filled, instead of my 4, each one individually it didn't work I tried changing the battery, here goes a few dollars to nowhere, didn't work if I don't reset the CMOS it sometime stock on RAM led, sometime on BOOT DEVICE led, when this happen, it stuck on CPU speed detection when I boot right after the reset, i MUST click on the F2 option (boot with default bios setting) if i go into the bios and save/restart, i have to reset it again when booted, everything is rock solid stable, tried memtest, cpu stress, etc, etc. without issue what should be my next step? trying a new psu? (i need to find one..) doing rma? (i need this mb since it's my only computer...) something else?

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• I keep losing wireless connection

  - by posfan12

  I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• Apache Consuming Resources

  - by Chris Edwards

  Our web server suddenly has been giving us load issues. After I restart Apache the load stays low for a few hours up to a day or so then its back up to around 3.0 until I restart Apache again. Any suggestions on tracking down what is causing this? Thanks! Chris Edwards top - 20:15:05 up 19 days, 10:59, 1 user, load average: 2.11, 2.17, 2.47 Tasks: 532 total, 6 running, 525 sleeping, 0 stopped, 1 zombie Cpu(s): 11.5%us, 0.4%sy, 0.0%ni, 88.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32842656k total, 13185872k used, 19656784k free, 6143740k buffers Swap: 1048568k total, 0k used, 1048568k free, 3515252k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19089 apache 20 0 1912m 1.5g 6584 R 99.6 4.9 71:01.53 /usr/sbin/httpd 21136 apache 20 0 392m 55m 5736 R 95.0 0.2 0:03.45 /usr/sbin/httpd 21139 apache 20 0 374m 38m 5808 S 40.5 0.1 0:04.91 /usr/sbin/httpd 21124 apache 20 0 389m 51m 5948 R 38.9 0.2 0:03.15 /usr/sbin/httpd 21111 apache 20 0 371m 35m 5964 S 18.8 0.1 0:01.22 /usr/sbin/httpd 21127 apache 20 0 375m 39m 5832 S 17.8 0.1 0:01.66 /usr/sbin/httpd 21128 apache 20 0 374m 38m 5792 S 16.2 0.1 0:01.56 /usr/sbin/httpd 21110 apache 20 0 374m 38m 5848 S 15.9 0.1 0:01.02 /usr/sbin/httpd 21113 apache 20 0 374m 38m 5836 S 15.9 0.1 0:02.16 /usr/sbin/httpd 21077 apache 20 0 379m 43m 6408 S 11.0 0.1 0:07.22 /usr/sbin/httpd 21101 apache 20 0 384m 49m 6988 R 5.8 0.2 0:04.47 /usr/sbin/httpd 21112 apache 20 0 374m 38m 5956 R 2.6 0.1 0:01.61 /usr/sbin/httpd

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• Amazon EC2 Reserved Instances: "Heavy Utilization" clarification

  - by gravyface

  Should be another easy one here, but I need clarification on what they define as "heavy utilization" for Reserved Instance types. From their Website: Heavy Utilization RIs – Heavy Utilization RIs offer the most absolute savings of any Reserved Instance type. They’re most appropriate for steady-state workloads where you’re willing to commit to always running these instances in exchange for our lowest hourly usage fee. With this RI, you pay a little higher upfront payment than Medium Utilization RIs, a significantly lower hourly usage fee, and you’re charged that lower hourly rate for every hour in the Reserved Instance term you purchase. Using Heavy Utilization RIs, you can save up to 41% for a 1-year term and 58% for a 3-year term vs. running On-Demand Instances. If you’re trying to find a break-even utilization, you’re economically advantaged using Heavy Utilization RIs (vs. On-Demand Instances) if you plan to use your instance more than 43% of a 1-year term or 79% of a 3-year term. I'm assuming that, if I'm planning on running a 24/7 Web Server, then regardless of how many resources I consume (bandwidth, cpu cycles, memory), I would want to go with a Heavy Utilization Reserved Instance? This one Web Server in particular will likely barely budge the cpu, but it needs to be up and running 24/7. Not 100% on what they're defining as "heavy".

  Read the article

• Idle state detection for server

  - by odinmillion

  Windows OS has a service that detects idle state. Details: Task Idle Conditions The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. When the Task Scheduler service detects that the computer is idle, the service only waits for user input to mark the end of the idle state. It is very useful for usual PCs that have keyboard amd mouse. We can use standard task scheduler to start some process like defrag when PC in idle state and stop when PC isn't in idle state. But what should we use when we using a standalone server without keyboard and mouse? Server sometimes receives commands by TCP/IP and starts CPU and HDD activity. But sometimes CPU and HDD activity at zero level. I would like to use this periods of time to start defrag or another process. But this started at "idle" state processes should be terminated when another commands will appear. So, standard idle state conditions cant help me because we have not got user input to stop idle state. I need more customizable idle state detector. Automatically started processes shouldn't influence to idle state, but PC should go away from idle state when another process will apperar. What should I use? Maybe exists some advansed task scheduler? Or I should write some useful utility on C#? I hope that it is a standard task and all useful utilities already compiled :)

  Read the article

• saslauthd using too much memory

  - by Brian Armstrong

  Woke up today to see my site slow/unresponsive. Pulled up top and it looks like a ton of saslauthd processes have spun up using about 64m of RAM each, causing the machine to enter swap space. I've never seen this many used on there. top - 16:54:13 up 85 days, 11:48, 1 user, load average: 0.32, 0.50, 0.38 Tasks: 143 total, 1 running, 142 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 97.3%id, 0.2%wa, 0.0%hi, 0.0%si, 1.4%st Mem: 1048796k total, 1025904k used, 22892k free, 14032k buffers Swap: 2097144k total, 332460k used, 1764684k free, 194348k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 848 admin 20 0 263m 115m 4840 S 0 11.3 5:02.91 ruby 906 admin 20 0 265m 113m 4828 S 0 11.1 5:37.24 ruby 30484 admin 20 0 248m 91m 4256 S 6 9.0 219:02.30 delayed_job 4075 root 20 0 160m 65m 952 S 0 6.4 0:24.22 saslauthd 4080 root 20 0 162m 64m 936 S 0 6.3 0:24.48 saslauthd 4079 root 20 0 162m 64m 936 S 0 6.3 0:24.70 saslauthd 4078 root 20 0 164m 63m 936 S 0 6.2 0:24.66 saslauthd 4077 root 20 0 163m 62m 936 S 0 6.1 0:24.66 saslauthd 3718 mysql 20 0 312m 52m 3588 S 1 5.1 3499:40 mysqld 699 root 20 0 72744 7640 2164 S 0 0.7 0:00.50 ruby 15701 postfix 20 0 106m 5712 4164 S 1 0.5 0:00.50 smtpd 15702 postfix 20 0 52444 3252 2452 S 1 0.3 0:00.06 cleanup 4062 postfix 20 0 41884 3104 1788 S 0 0.3 125:26.01 qmgr 15683 root 20 0 51504 2780 2180 S 0 0.3 0:00.04 sshd 14595 postfix 20 0 52308 2548 2304 S 1 0.2 0:24.60 proxymap 15483 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.38 smtp 15486 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.36 smtp 15488 postfix 20 0 43380 2540 1992 S 0 0.2 0:00.38 smtp 15485 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.36 smtp 15489 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.40 smtp Wasn't sure what Saslauthd is, Google says it handles plantext authentication. The machine has been sending a lot of email through postfix, so this could be related. Anyone know why so many may have spun up? Are they safe to kill? Thanks!

  Read the article

• Clustering/load balancing for cluster unaware applications

  - by AaronLS

  Forgive me if I use any of these terms incorrectly. I am wondering if there is any kind of software that would allow my two "join" two computers together such that a cluster unaware application could utilize their combined computing resources? By "cluster unaware" I mean an application that isn't designed to share work across multiple services. My understanding is that clustering is enabled by the specific application by it's architecture, such that messaging with multiple instances of the application coordinate the sharing of work. Instead I am looking for something that enables clustering at the OS or virtualization level, so that any application could essentially be clustered. Failing that, I am also wondering about the following scenario: We have 3 different applications we will call A, B, and C. We have 2 single core computers. At any given time lets say that any combination of those applications will be CPU intensive. In cases where only 2 of those apps are very active, have one of them moved over to a different server. In a nutshell, some sort of dynamic automatic shuffling of the application's load. I have heard of virtual machines that can be migrated across physical machines while live, but I am wondering if this can be done automatically in response to an application's or VM's CPU activity?

  Read the article

• Flash alternative for iBook Mac?

  - by Hunter Dolan

  I have a old Apple iBook G4 that I decided to hook up to my main TV. I like the setup because I can surf the internet on my TV now. The only thing that I can't seem to do is watch Flash videos. Apparently Flash Player 10 doesn't play nice with the iBook's graphics card's GPU, leaving all the graphics processing to the CPU which is a disaster. Others suggested downgrading to Flash Player 9, I did that, and youtube worked fine, but Hulu (The main reason I wanted to hook it up to the TV in the first place) did not. Anyone know of a Flash alternative or a Flash 10 fix for the iBook? Or even a Hulu client that doesn't require Flash. Here are my iBook's Specs Model Name: iBook G4 <br> Model Identifier: PowerBook6,5 <br> Processor Name: PowerPC G4 (1.2) <br> Processor Speed: 1.2 GHz <br> Number Of CPUs: 1 <br> L2 Cache (per CPU): 512 KB <br> Memory: 512 MB <br> Bus Speed: 133 MHz <br> Boot ROM Version: 4.8.7f1 <br> Mac OS X Version: 10.5.8 <br> PS: Don't tell me that I need to buy a new computer. I know that I would have better results with a new computer but I don't want to buy a new computer just for Hulu.

  Read the article

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• Pentium 4 Willamette vs. Faster Celeron Northwood [closed]

  - by Synetech inc.

  Which is the preferable of the following two processors? Intel® Pentium® 4 Processor 1.70 GHz, 256K Cache, 400 MHz FSB Willamette Intel® Celeron® Processor 2.40 GHz, 128K Cache, 400 MHz FSB Northwood Details: A few months ago my motherboard died, so I bought a used computer that had a 2.4GHz Celeron. My old system had a 1.7GHz Pentium 4, so now I’m trying to decide which CPU to use. Obviously a P4 is preferable over a Celeron, but the Celeron is (significantly?) faster than the P4. I’m wondering if the faster Celeron might be better for certain tasks (ie, stronger but dumber is better at some things than smarter but weaker). I tried Googling for some reviews and comparisons for graphs to get a clear depiction of which is better overall, but found nothing that helped. (I did manage to find one page that indicates (apparently by poll, not benchmark) that the Celeron is better.) So which CPU should I use? Does anyone know of some graphs that I can use to compare the two? The system is a general-purpose machine for word-processing, Internet, and casual games (not Crysis, but not Solitaire either). It will be running Windows XP. The board is a 478 with 400MHz FSB.

  Read the article

• How small (spec wise) can a virtual machine be and still boot up and run some sort of OS?

  - by IllvilJa

  One of the advantages with virtual machines is that you can be very flexible with their sizes. If the host system permits it, you can have a very large virtual machine with a lot of virtual RAM and disk. Also, you can decide to go the other way around, to give the virtual machine a very modest amount of RAM and disk and then choose and configure the OS appropriately. The question is, how small virtual machines have people managed to setup (and get to both boot up and to run)? Virtual machines doing something usuful is preferable, even if I know "useful" in this context is awfully subjective, but laboratory-cases with a configuration stripped beyond common sense could be intresting as well, just to see what people manage to boot and run. Quite open ended question and quite academic, but think of it: an extremely small VM (which still does something useful) takes very little memory and disk and can be quite quickly saved to and restored from disk. If it's also gentle on CPU resources, one might consider having a huge number of such VMs up and running on a host. (Imagine a VM running just an old Commodore 64 or Commodore Amiga in it. Ok, way wrong CPU architecture for modern Virtualization software running on a x86-based PC but still an interesting thought. You could have quite a few such small VMs running on a modern PC.)

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• Overclock Failed

  - by John

  This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

  Read the article

• Getting the most out of a Mac mini as a media center

  - by celebritarian

  Hello! I own an old Mac mini from 2006 (maybe early 2007). It's got an Intel Core Solo 32-bits CPU and 512 MB RAM. 160 GB HDD. The GPU is an integrated chip… Currently, my Mini is sitting under my LCD TV (720p). It's plugged in via a DVI to HDMI cable. It's currently running Leopard. And unfortunately, Snow Leopard can't be installed on a device with less than 1 GB of RAM… So, my Mac mini isn't exactly powerful. Also, it's slow and Mac OS X is not a pleasant experience on my Mini right now. It feels slow and heavy. I want to use my Mac mini as a media center/player. I want to be able to play video files in 720p (H.264, Matroska/MOV files). So basically, playing high-def videos is all I want to do with my Mini. What OS should I install? Stick to OS X? Optimize for video playback? Or should I install another OS — like Win XP, Ubuntu or any other Linux dist? Then, will my Mini be able to play 720p videos smoothly, even though the CPU and GPU aren't that powerful and with the limit of 512 MB of RAM? Appreciate all help. Thanks in advance!

  Read the article

• Find out which task is generating a lot of context switches on linux

  - by Gaks

  According to vmstat, my Linux server (2xCore2 Duo 2.5 GHz) is constantly doing around 20k context switches per second. # vmstat 3 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 2 0 7292 249472 82340 2291972 0 0 0 0 0 0 7 13 79 0 0 0 7292 251808 82344 2291968 0 0 0 184 24 20090 1 1 99 0 0 0 7292 251876 82344 2291968 0 0 0 83 17 20157 1 0 99 0 0 0 7292 251876 82344 2291968 0 0 0 73 12 20116 1 0 99 0 ... but uptime shows small load: load average: 0.01, 0.02, 0.01 and top doesn't show any process with high %CPU usage. How do I find out what exactly is generating those context switches? Which process/thread? I tried to analyze pidstat output: # pidstat -w 10 1 12:39:13 PID cswch/s nvcswch/s Command 12:39:23 1 0.20 0.00 init 12:39:23 4 0.20 0.00 ksoftirqd/0 12:39:23 7 1.60 0.00 events/0 12:39:23 8 1.50 0.00 events/1 12:39:23 89 0.50 0.00 kblockd/0 12:39:23 90 0.30 0.00 kblockd/1 12:39:23 995 0.40 0.00 kirqd 12:39:23 997 0.60 0.00 kjournald 12:39:23 1146 0.20 0.00 svscan 12:39:23 2162 5.00 0.00 kjournald 12:39:23 2526 0.20 2.00 postgres 12:39:23 2530 1.00 0.30 postgres 12:39:23 2534 5.00 3.20 postgres 12:39:23 2536 1.40 1.70 postgres 12:39:23 12061 10.59 0.90 postgres 12:39:23 14442 1.50 2.20 postgres 12:39:23 15416 0.20 0.00 monitor 12:39:23 17289 0.10 0.00 syslogd 12:39:23 21776 0.40 0.30 postgres 12:39:23 23638 0.10 0.00 screen 12:39:23 25153 1.00 0.00 sshd 12:39:23 25185 86.61 0.00 daemon1 12:39:23 25190 12.19 35.86 postgres 12:39:23 25295 2.00 0.00 screen 12:39:23 25743 9.99 0.00 daemon2 12:39:23 25747 1.10 3.00 postgres 12:39:23 26968 5.09 0.80 postgres 12:39:23 26969 5.00 0.00 postgres 12:39:23 26970 1.10 0.20 postgres 12:39:23 26971 17.98 1.80 postgres 12:39:23 27607 0.90 0.40 postgres 12:39:23 29338 4.30 0.00 screen 12:39:23 31247 4.10 23.58 postgres 12:39:23 31249 82.92 34.77 postgres 12:39:23 31484 0.20 0.00 pdflush 12:39:23 32097 0.10 0.00 pidstat Looks like some postgresql tasks are doing 10 context swiches per second, but it doesn't all sum up to 20k anyway. Any idea how to dig a little deeper for an answer?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Running Windows Update inside Windowx XP Mode

  - by Noam Gal

  I am working on a Win 7 Ultimate machine, and was using XP for some development tasks (for compatibility checks). Everything worked like a charm on the XP, including updates. Two days ago I had to switch computer (mainly a new motherboard/cpu), and I had just stuck my old HD inside the newer case. Win 7 worked like a charm - installed all the new drivers, identified everything automatically, no sweat. The trouble started when I tried running my old XP mode - it won't launch, complaining about the cpu change. I figured it's not a big deal, and I deleted the VM, and re-ran XP mode. It told me it can't find it, and offered to create a new one, just what I wanted. I had finished setting up the new XP mode VM, and it seems to work just fine. Got it to use the host network adapter, so I can surf from "inside". But I can't get Windows Update to run. Whenever I click on the "Custom" button on the WU site, after a short while, I get the [Error number: 0x80072EFD] page. I tried several solution from around the web for it (clearing some cache and restarting the wuauserv, even a microsoft fix-it run), but still nothing seems to work. Anyone here has any new tip for me? Thanks.

  Read the article

• IPMI sdr entity 8 (memory module) only showing 3 records?

  - by thinice

  I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to the OpenIPMI documentation these are supposed to represent DIMM slots. Output from A (1 CPU, 3 DIMMS, 1 bank.): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 27 degrees C Temp | 0Bh | ns | 8.1 | Disabled Temp | 0Ch | ucr | 8.1 | 52 degrees C Output from B (2 CPUs, 3 DIMMS in both banks, 6 total): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 26 degrees C Temp | 0Bh | ok | 8.1 | 25 degrees C Temp | 0Ch | ucr | 8.1 | 51 degrees C Now, I'm starting to think this output isn't DIMMS themselves, but maybe a sensor for each bank and something else? (Otherwise, shouldn't I see 6 readings for the one with both banks active?) The CPU's aren't near 50 deg C, so I doubt the significantly higher reading is due to proximity - Is anyone able to explain what I'm seeing? Does the output from my ipmitool sdr entity 8 -v here on pastebin seem to hint at different sensors? The sensor naming conventions are poor - seems like a dell thing. Here is output from racadm racdump

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• Squid proxy in cent os often disconnected with error : tunnelConnectTimeout(): tunnelState->servers is NULL

  - by Ela

  I am having very often internet disconnection problem with Squid proxy service. My server config; OS: CentOS release 6.3 (Final) model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz cpu MHz : 1600.000 My Local systems IP range:192.168.2.x Server IP: 192.168.2.11 Also this server is configured with lamp for development,Samba SMB file service manager and No svn currently. So i see maximum possibility is this squid proxy since this is where it stops to connect and am sure when i restart the server net started working so something wrong with this squid service only. And this server is connected with local 14 other windows machines and basically serves as a central development node. I am able to resolve it by restarting the server fully some time or sometimes by restarting the squid proxy which is totally killing our development. I have attached my cache log file here for the error info. Cache log file Sample error log: 2013/07/01 13:25:38| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:50| clientProcessRequest: Invalid Request 2013/07/01 13:26:05| tunnelConnectTimeout(): tunnelState->servers is NULL Some help can make our lives easier, Thanks in advance.

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >