Search Results

Search found 41520 results on 1661 pages for 'fault tolerant'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 98/1661 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

  • Remote Desktop Connection - Connection Failed

    - by NLV
    Let me explain the problem. My system is connected to a network and 'was' having XP installed in it. Recently i formatted the system and installed windows server 2003 and added the machine to the network. Everything is working fine like mapping the network drives, pinging the machines etc. But i've the following problems. I'm not able to do a remote desktop connection to another system in the network. Some systems in the network is able to do a remote desktop to my machine. But not all. If i host any web service in my system i'm not able to connect it from any other machine in the network. I've already configured the Remote Desktop to accept connections. Any ideas? NLV

    Read the article

  • IIS7 web farm - local or shared content?

    - by rbeier
    We're setting up an IIS7 web farm with two servers. Should each server have its own local copy of the content, or should they pull content directly from a UNC share? What are the pros and cons of each approach? We currently have a single live server WEB1, with content stored locally on a separate partition. A job periodically syncs WEB1 to a standby server WEB2, using robocopy for content and msdeploy for config. If WEB1 goes down, Nagios notifies us, and we manually run a script to move the IP addresses to WEB2's network interface. Both servers are actually VMs running on separate VMWare ESX 4 hosts. The servers are domain-joined. We have around 50-60 live sites on WEB1 - mostly ASP.NET, with a few that are just static HTML. Most are low-traffic "microsites". A few have moderate traffic, but none are massive. We'd like to change this so both WEB1 and WEB2 are actively serving content. This is mainly for reliability - if WEB1 goes down, we don't want to have to manually intervene to fail things over. Spreading the load is also nice, but the load is not high enough right now for us to need this. We're planning to configure our firewall to balance traffic across the two servers. It will detect when a server goes down and will send all the traffic to the remaining live server. We're planning to use sticky sessions for now... eventually we may move to SQL Server session state and stateless load balancing. But we need a way for the servers to share content. We were originally planning to move all the content to a UNC share. Our storage provider says they can set up a highly available SMB share for us. So if we go the UNC route, the storage shouldn't be a single point of failure. But we're wondering about the downsides to this approach: We'll need to change the physical paths for each site and virtual directory. There are also some projects that have absolute paths in their web.config files - we'll have to update those as well. We'll need to create a domain user for the web servers to access the share, and grant that user appropriate permissions. I haven't looked into this yet - I'm not sure if the application pool identity needs to be changed to this user, or if there's another way to tell IIS to use this account when connecting to the share. Sites will no longer be able to access their content if there's ever an Active Directory problem. In general, it just seems a lot more complicated, with more moving parts that could break. Our storage provider would create a volume for us on their redundant SAN. If I understand correctly, this SAN volume would be mounted on a VM running in their redundant VMWare environment; this VM would then expose the SMB share to our web servers. On the other hand, a benefit of the shared content approach is that we'd only need to deploy code to one place, and there would never be a temporary inconsistency between multiple copies of the content. This thread is pretty interesting, though some of these people are working at a much larger scale. I've just been discussing content so far, but we also need to think about configuration. I don't know if we can just use DFS replication for the applicationHost.config and other files, or if it's best to use the shared configuration feature with the config on a UNC share. What do you think? Thanks for your help, Richard

    Read the article

  • How to create an NFS proxy by using kernel server & client?

    - by Martin C. Martin
    I have a file server that exports as NFS. On an Ubuntu machine I mount that, then try to export it as an NFS volume. When I go to export it, I get the message: exportfs: /test/nfs-mount-point does not support NFS export How can I get this to work, or at least get more information as to what the problem is? Exact steps: Unbuntu 12.04 mount -f nfs myfileserver.com:/server-dir /test/nfs-mount-point [Works fine, I can read & write files] /etc/exports contains: /test/nfs-mount-point *(rw,no_subtree_check) sudo /etc/init.d/nfs-kernel-server restart Stopping NFS kernel daemon [ OK ] Unexporting directories for NFS kernel daemon... [ OK ] Exporting directories for NFS kernel daemon... exportfs: /test/nfs-mount-point does not support NFS export [ OK ] Starting NFS kernel daemon [ OK ]

    Read the article

  • Problem starting Glassfish on a VPS

    - by Raydon
    I am attempting to install Glassfishv3 on my Ubuntu (8.04) VPS using Java 1.6. I initially tried starting the server using: asadmin start-domain and received the following error message: JVM failed to start: com.sun.enterprise.admin.launcher.GFLauncherException: The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Command start-domain failed. I attempted to run it again and received a different message: Waiting for DAS to start Error starting domain: domain1. The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Command start-domain failed. If I run cat /proc/meminfo I get the following (all other values are 0kB): MemTotal: 1310720 kB MemFree: 1150668 kB LowTotal: 1310720 kB LowFree: 1150668 kB I have checked the contents of glassfish/glassfish/domains/domain1/config/domain.xml and the JVM setting is: -Xmx512m Any help on resolving this problem would be appreciated.

    Read the article

  • Libvirt installation - Centos

    - by sethu
    I am currently using Centos 6. I want to use the latest version of libvirt (libvirt 0.9.4). The machine already has libvirt 0.8.1 installed . I did yum remove libvirt to remove the existing libvirt and I compiled 0.9.4 from source using : ./configure --prefix=/ make make install ldconfig /etc/init.d/libvirtd start After the installation is complete, I wanted to use the virsh interface. Once I enter virsh , I get : virsh /lib/libvirt.so.0: version 'LIBVIRT_PRIVATE 0.8.1' not found (required by virsh) Can somone let me know how to solve this issue? Correct me if I am doing something wrong. Thanks a lot ! Sethu

    Read the article

  • Using wildcard SSL certs (chain certificate) with mod_gnutls

    - by QWade
    I have a wildcard SSL certificate from GoDaddy that has three files: wildcard.crt gd_bundle.crt wildcard.key In setting up mod_gnutls to be used with Apache, I can get the site to come up, but it throws a warning that the SSL certificate has not been validated by a CA. When I use mod_ssl, I can stipulate a SSLCertificateChainFile directive and point it at the bd_bundle.crt file. I do not see how to do this with mod_gnutls. Any help is appreciated. I also know that mod_ssl supports SNI, so if there is not an easy answer, I will just try that. Thanks, QWade

    Read the article

  • How do I install an rpm that complains about rpmlib(FileDigests) <= 4.6.0-1?

    - by Jake
    Im trying to install an rpm file on CentOS 5 and Im not sure how to resolve this issues it brings up: $ rpm --install epel-release-6-5.noarch.rpm warning: epel-release-6-5.noarch.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 0608b895 error: Failed dependencies: rpmlib(FileDigests) <= 4.6.0-1 is needed by epel-release-6-5.noarch rpmlib(PayloadIsXz) <= 5.2-1 is needed by epel-release-6-5.noarch What do the lines rpmlib(FileDigests) <= 4.6.0-1 mean? is rpmlib out of date or FileDigests out of date? Whats with the syntax of something followed by parentheses? Ive tried to use yum so that it can resolve dependencies automatically but it is unable: $ sudo yum --nogpgcheck install epel-release-6-5.noarch.rpm ... Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: rpmlib(FileDigests) is needed by epel-release-6-5.noarch rpmlib(PayloadIsXz) is needed by epel-release-6-5.noarch Complete! (1, [u'Please report this error in https://bugzilla.redhat.com/enter_bug.cgi?product=Red%20Hat%20Enterprise%20Linux%205&component=yum']) On this page https://bugzilla.redhat.com/show_bug.cgi?id=665073, they say my rpm is out of date but then say I should request an rpm file that works with my version of rpm (which is 4.4.2.3) but I don't want to do that. How do I make my system compatible with this rpm file? Bonus points if you tell me how I can fix the public key error.

    Read the article

  • Mouse wheel in VirtualPC (mostly) does not work on 64-bit Windows 7 RC

    - by JonStonecash
    I have recently upgraded my laptop from WinXP Pro (32-bit) to Windows 7 RC (64-bit). I have a number of VirtualPC 2007 images that I use for testing on various platforms and looking at beta software. I have installed the 64-bit version of VirtualPC. The images all work with the exception of the mouse wheel within the virtual machine. I have tried this out with WinXP Pro, Windows 7 RC, and Windows Server 2008 images. All are 32-bit and all exhibit the same behavior: a gentle rotation of the wheel does nothing; a quick rotation of the wheel sometimes gets a scroll and sometimes not. I regard this behavior as unusable as I tend to use the mouse wheel a lot. All of this worked just fine on WinXP. I have re-installed the Virtual machine additions on all of the machines. The Windows 7 RC virtual image was created after the upgrade to Windows 7 and the 64-bit version of VirtualPC (just to isolate the possibility that I had corrupted the images during the transition). I have googled, binged, and yahoo-ed. There are scattered mentions of this problem (dating back to VPC 2004) but no solutions. I am aware that I could start up one of these images and then use remote desktop connections to get access to that image. I, in fact, do just that for some development that I am doing; the mouse works just fine. This is acceptable in this case because I spend hours at a time in the development VM. These test environments are different in that I will bring up an image for just a short time: minutes rather than hours. Adding the rdc step is much more significant in these cases. Does anyone have any idea of what to do next?

    Read the article

  • Shorten Emacs timeout of ~/.emacs read

    - by user35042
    My ~/.emacs start-up file is stored in my AFS home directory. Often when I login to a linux machine I will forget to renew my AFS credentials before attempting to edit a local (non-AFS) file with Emacs. When this happens Emacs will attempt to load ~./emacs but cannot because it is in AFS space where I do not have access. Eventually (after a minute or so) Emacs will give up trying to load ~./emacs and continue. But waiting for Emacs to timeout is annoying (typing Ctrl-Z does not seem to interrupt this timeout). I want to shorten the amount of time that Emacs waits before giving up. I have tried the suggestion at this site which says to put the following code in the site-start.el file: (with-timeout (4) (load remote-.emacs)) However, when I do that I get the error Error in init file: Symbol's value as variable is void: remote-\.emacs whenever starting Emacs. How can I shorten this timeout?

    Read the article

  • Office365 DirSync Active Directory Integration

    - by dean
    I am preparing to deploy Office365 for my organization. We have an on premise Active Directory Domain Controller (Windows Server 2012 R2). We would like to leverage our Active Directory for: automatic user provisioning in Office365, and password synchronization, using the DirSync tool. Our Active Directory Domain is example.pvt. Email is currently Rackspace Exchange and email addresses follow the form [email protected]. Active Directory User Logon Name follows the form firstinitiallastname. My Questions are: What Active Directory Attribute(s) can be use in provisioning the email address in Office365? Is it possible to use the E-mail field in Active Directory to provision the email address in Office365? Will the fact that our Active Directory Domain has a different extension (.pvt vs. .com) cause a problem with our planned provisioning method?

    Read the article

  • Desktop SATA drives in SATA <-> FC array

    - by chris
    Let's assume you've got a box like one of these with space for 24 SATA disks. What are the best bits of advice for deploying this? For instance, should you be greedy and go for the 1.5 or 2tb disks or are they just not reliable enough to be used in an array like this and you should stick with 640gb or 750gb disks instead? Also, I know that FC (or generically, "enterprise class") disks have a different error recovery strategy than desktop disks. An enterprise disk will fail a read quickly and report to the controller that it wasn't able to read that block, and the RAID controller will quickly regenerate the info from the parity disk and mark the block as bad. A desktop disk, on the other hand, will try and try and try again to get the data, and in pathological cases this may cause a raid controller to fail the whole disk because the read operation times out. So there are a couple aspects to this question: What's the best sort of disk to get today? (ie specific disks on the market in Feb 2010) Generically, what should someone look for when trying to buy something like this that kinda walks the line between enterprise and consumer? Lastly -- is there anything that can be done with current "consumer" disks to make them more suitable for array use? IE can you use a SMART configuration to change the error recovery strategy used by the disk? Thanks!

    Read the article

  • https root webapp in jboss 5 through apache mod_proxy with ajp

    - by Jesus
    hi, i have apache 2.2.3 and jboss 5.1 installed in my server, in apache i have 2 apps in php+mysql and in jboss i have in the root app (/) liferay portal. i used mod_proxy to reach the jboss app : <VirtualHost server_ip:80> ServerName intranet.mycompany.com ProxyPreserveHost On ProxyPass / balancer://jbosscluster/ ProxyPassReverse / http://server_ip:8080 </VirtualHost> but now i have to enable https only in intranet.mycompany.com, and i dont know where configure the ssl, in apache, jboss, both. i tried in jboss in the server.xml, generating a selfsigned certificate with keytool, but apache doesnt forward to https://server_ip:8443 i will appreciate your help.

    Read the article

  • How to install mcrypt on RHEL5

    - by wag2639
    We have an RHEL5 server that I'm trying to install PHP-Mcrypt on and I'm stuck when I tried to run ./configure for mcrypt source files. I was using this guide: http://atlantatechpro.com/howtos/howtoslinux/howtosmhashmcrypt When I try to install (./configure) mcrypt, I get this checking for libmcrypt - version = 2.5.0... no Could not run libmcrypt test program, checking why... The test program compiled, but did not run. This usually means that the run-time linker is not finding LIBMCRYPT or finding the wrong version of LIBMCRYPT. If it is not finding LIBMCRYPT, you'll need to set your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point to the installed location Also, make sure you have run ldconfig if that is required on your system If you have an old version installed, it is best to remove it, although you may also be able to get things to work by modifying LD_LIBRARY_PATH configure: error: * libmcrypt was not found I also made a file at /etc/ld.so.conf.d/libmcrypt.conf with /usr/local/libmcrypt in it and ran /sbin/ldconfig I might have screwed things up by trying to reinstall libmcrypt without the configure arguments. Any suggestions on what to do now?

    Read the article

  • multiple puppet masters

    - by Oli
    I would like to set up an additional puppet master but have the CA server handled by only 1 puppet master. I have set this up as per the documentation here: http://docs.puppetlabs.com/guides/scaling_multiple_masters.html I have configured my second puppet master as follows: [main] ... ca = false ca_server = puppet-master1.test.net I am using passenger so I am a bit confused how the virtual-host.conf file should look for my second puppet-master2.test.net. Here is mine (updated as per Shane Maddens answer): LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby Listen 8140 <VirtualHost *:8140> ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP SSLCertificateFile /var/lib/puppet/ssl/certs/puppet-master2.test.net.pem SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/puppet-master2.test.net.pem #SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem #SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem # If Apache complains about invalid signatures on the CRL, you can try disabling # CRL checking by commenting the next line, but this is not recommended. #SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem SSLVerifyClient optional SSLVerifyDepth 1 # The `ExportCertData` option is needed for agent certificate expiration warnings SSLOptions +StdEnvVars +ExportCertData # This header needs to be set if using a loadbalancer or proxy RequestHeader unset X-Forwarded-For RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have commented out the #SSLCertificateChainFile, #SSLCACertificateFile & #SSLCARevocationFile - this is not a CA server so not sure I need this. How would I get passenger to work with these? I would like to use ProxyPassMatch which I have configured as per the documentation. I don't want to specify a ca server in every puppet.conf file. I am getting this error when trying to get create a cert from a puppet client pointing to the second puppet master server (puppet-master2.test.net): [root@puppet-client2 ~]# puppet agent --test Error: Could not request certificate: Could not intern from s: nested asn1 error Exiting; failed to retrieve certificate and waitforcert is disabled On the puppet client I have this [main] server = puppet-master2.test.net What have I missed? -- update Here is a new virtual host file on my secondary puppet master. Is this correct? I have SSL turned off? LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby # you probably want to tune these settings PassengerHighPerformance on PassengerMaxPoolSize 12 PassengerPoolIdleTime 1500 # PassengerMaxRequests 1000 PassengerStatThrottleRate 120 RackAutoDetect Off RailsAutoDetect Off Listen 8140 <VirtualHost *:8140> SSLEngine off ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 # Obtain Authentication Information from Client Request Headers SetEnvIf X-Client-Verify "(.*)" SSL_CLIENT_VERIFY=$1 SetEnvIf X-SSL-Client-DN "(.*)" SSL_CLIENT_S_DN=$1 DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Cheers, Oli

    Read the article

  • Filesystems for webserver with SATA and Solid State disk,

    - by Jorisslob
    We have just ordered a new webserver with 120 Gb solid state disk and a SATA disk. I am trying to plan ahead what sort of filesystem to use. This system will be running Linux, Apache/Tomcat to host java services. The main service is a system where people can upload reasonably large files (in the order of 100 Mb, images, image stacks and video), which people will be able to annotate and which will be sent to a database server when annotation is complete. Thus far, I plan to put most of the utility programs of the operating system om the SSD and put the large media files there. The SATA disks will hold the less volitile data like apache, tomcat and the servlets. For filesystems I have considered going for the stable EXT3 because I hear that it is best supported. The downside seems to be that it not the ideal choice for large files. That is why I am leaning towards using XFS for the SSD and EXT3 for the SATA. My questions are: 1) Does this sound like a reasonable setup? 2) What filesystems would you recommend for the SSD and for the SATA? Thanks

    Read the article

  • How to setup GoDaddy dns forwarding

    - by skerit
    I have a VPS in England and a hosting account with hostgator. I use GoDaddy to manage my domain name settings. My VPS is mainly used for mail and certain other services. The actual site is hosted at hostgator I had a cname called "www" which would point to mydomain.com, at hostgator All the rest would point to my vps. (The "A" host, @) Now Hostgator lost my original domain name, so pointing to that leads to a fake website. But you can't just make www point to an ip adres. No. I tried adding an "A" host which would point to the hostgator ip-adres and then I would point the "www" cname to that "A" host. But that does not work. Can anyone shed some light on this?

    Read the article

  • Remove Dell Openmanage from Windows 2008

    - by Erwin Blonk
    I have installed Dell Openmanage Server Agent 4.2.2 on Windows Server 2008. I need the newer version, so I need to install this version first. However, outside some registry references pointing to sources that aren't there, there is little or no trace of it being installed. For example, no trace of the program files or an entry in Prgrams And Features. Still, installing a newer version keeps coming up with an older version that needs to be removed first. When I try to install version 4.2.2 to repair and eventually remove it, it gives an error: Dell Openmanage Server Agent - Error An error was encountered while testing machine type. Failure openingen required handle to .DLL. Dell Openmanage Server Agent cannot continue the installation. Setup will exit now. I haven't found anything using different parts of the error messages as search terms.

    Read the article

  • What does it mean when ARP shows <incomplete> on eth1

    - by Geoff Dalgas
    We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

    Read the article

  • gparted installed on OpenSuse shows all file system types as greyed out except for hfs

    - by cmdematos.com
    I have had this problem before and fixed it, but I don't recall how I did it and I did not record it (sadness :( ) I have all the requisite commands installed on OpenSuse to support gparted's efforts in creating any of the supported file systems. I recall that the problem was that gparted could not find the commands, in any event all the file systems are greyed out in the context menu except for the legacy hfs partition which only supports < 2gb. Even extfs2-extfs4 are greyed out. How do I fix this?

    Read the article

  • Microsoft CRM Dynamics Install

    - by Pino
    Trying to install CRM4.0 on Windows Small Business Server. We get through the isntall process (Setting up database, website, AD etc) when we clikc install though the following error is dumped to the log file, anyone point us in the right directon? 13:49:07| Info| Win32Exception: 1635 13:49:07| Error| Failed to revoke temporary database access.System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'SCHIP\administrator'. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.Crm.CrmDbConnection.Open() at Microsoft.Crm.Setup.Database.SharedDatabaseUtility.DeleteDBUser(String sqlServerName, String databaseName, String user, CrmDBConnectionType connectionType) at Microsoft.Crm.Setup.Server.RevokeConfigDBDatabaseAccessAction.Do(IDictionary parameters) 13:49:07| Error| HResult=80004005 Install exception.System.Exception: Action Microsoft.Crm.Setup.Server.MsiInstallServerAction failed. --- System.ComponentModel.Win32Exception: This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package at Microsoft.Crm.Setup.Common.Utility.MsiUtility.InstallProduct(String packagePath, String commandLine) at Microsoft.Crm.Setup.Server.MsiInstallServerAction.Do(IDictionary parameters) at Microsoft.Crm.Setup.Common.Action.ExecuteAction(Action action, IDictionary parameters, Boolean undo) --- End of inner exception stack trace --- at Microsoft.Crm.Setup.Common.Action.ExecuteAction(Action action, IDictionary parameters, Boolean undo) at Microsoft.Crm.Setup.Common.Installer.Install(IDictionary stateSaver) at Microsoft.Crm.Setup.Common.ComposedInstaller.InternalInstall(IDictionary stateSaver) at Microsoft.Crm.Setup.Common.ComposedInstaller.Install(IDictionary stateSaver) at Microsoft.Crm.Setup.Server.ServerSetup.Install(IDictionary data) at Microsoft.Crm.Setup.Server.ServerSetup.Run() 13:49:07| Info| Microsoft Dynamics CRM Server install Failed. 13:49:07| Info| Microsoft Dynamics CRM Server Setup did not complete successfully. Action Microsoft.Crm.Setup.Server.MsiInstallServerAction failed. This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package

    Read the article

  • Cisco 800 series won't forward port

    - by sam
    Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

    Read the article

  • Sysprep and Capture task sequence failing using MDT 2010

    - by Nic Young
    I have created a Windows Deployment Services server in Windows 2008 R2. When I originally set it up I was able to successfully use MDT 2010 to create my boot images as well as creating task sequences that would sysprep and capture, and deploy my custom .wim files. Everything was working perfectly. About a month later I boot up my Windows 7 x86 image and run Windows updates to keep my image up to date. I then go and run my sysprep and capture task sequence and I get the following errors: I searched online for the cause of this error message and it just seems to be a generic permission denied type of error message. I then decided to completely rebuild my VM image from scratch and try again. I am still getting the same error messages as before. The following is what I have tried troubleshooting this issue: Troubleshooting: I have ensured that that UAC and the firewall is turned completely off when trying to capture the image. I have tried recreating the task sequence and making sure that the deployment share is updated. I have ensured that the local Administrator account is enabled and has the same password as specified in the task sequence. I have tried joining the computer to the domain and running the task sequence and I get a different error: I have attempted to run the script from the command prompt with "Run as Administrator" and I still receive the same errors above. For testing purposes I have ensured that Everyone has read/write access to my deployment share. I have spent days on trying to resolve this to no avail. Any ideas? EDIT: Below is the log info from C:\Windows\Deploymentlogs\BDD.log as requested. <![LOG[LTI Windows PE applied successfully]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[LTIApply processing completed successfully.]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[The task sequencer log is located at C:\Users\nicy\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Processing drivers for an X86 operating system.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[TargetOS is the current SystemDrive]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Property DriverCleanup is now = DONE]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Compare Image processor Type with Original [X86] = [X86].]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Prepare machine for Sysprep.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[No driver actions can be taken for OS Images installed from *.wim files.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[ZTIDrivers processing completed successfully.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Command completed, return code = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property RetVal is now = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unable to copy log to the network as no SLShare value was specified.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[CleanStartItems Complete]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unregistering TSCore.dll.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[About to run command: wscript.exe "\\server\deploymentshare$\Scripts\LTICleanup.wsf"]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Logs contained 7 errors and 0 warnings.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Checking mapped network drive.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[testing drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Disconnecting drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >