Search Results

Search found 20448 results on 818 pages for 'ip address'.

Page 98/818 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

  • 2 Nics - Same Subnet..Route backup traffic through one of them

    - by Matthewhall58
    I have a windows server and a centos linux server. I want the nightly backup file (targz) that copies to the windows machine to use a different nic so that the main nic is not burdenend with moving the large file. Each server has 2 Nics in it. the network is 10.173.10.0 mask 255.255.255.192 Centos Linux Box: Eth0 is configured with 10.173.10.80 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is configured with 10.173.10.71 mask 255.255.255.192 gw 10.173.10.65 Windows Box Eth 0 is 10.173.10.72 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is 10.173.10.70 mask 255.255.255.192 gw 10.173.10.65 I can ping each machine from each machine. On the linux machine I use the command route add -host 10.173.10.70 dev eth1 but then when i ping 10.173.10.70 it is unreachable..... WHY?

    Read the article

  • How can I do a "Coming Soon" redirect on IIS6 for everyone except a couple specific IPs?

    - by colinodell
    We're about to do some major maintanence on an IIS 6 / ASP (Classic) website. We want all visitors to be redirected to a "Coming Soon" page (or something similar). This should NOT apply to our dev team (operating remotely), so we'd want to specify certain IPs that should have access to the under-construction site. How can this be accomplished in IIS 6? (Using classic ASP if needed)

    Read the article

  • MadMACs is attempting to run after wifi autoconnect in Windows 7

    - by Dan
    I have been trying to get MadMACs to run on startup with my Win 7 x64 install. I've used the default registry startup option that is built into the script, but when I startup wlan0 is not randomized, and, in fact, the popup asking whether I want to allow the program to modify my machine comes up after WiFi connection (and obviously before the script has run). I would really like to get this working, but I'm at a dead end. Googling has not returned anything useful so any nudges in the right direction would be appreciated!

    Read the article

  • how to fight back attacks on my web service

    - by user12145
    My apache webservice is getting a large quantity of requests over the days, each one with somewhat random login to gain access. I identified about 60 such ips(a few sample below), all belong to google. is there a way to find more information about the origin of the attacker? or should I just block these ips. secondly, should I attempt to block the identified ips subnets(74.125.46.*) as a preventive measure? 72.14.194.65 64.233.172.20 74.125.75.19 72.14.194.33 74.125.46.87 74.125.44.91 74.125.46.91

    Read the article

  • Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

    - by IronicMuffin
    I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

    Read the article

  • How to route traffic via another machine before the default gateway

    - by Rich
    At the moment I have a router on 192.168.0.1, a Linux box on 192.168.0.2 and desktop clients from 192.168.0.3. Everything works with 192.168.0.1 as the default gateway. I'd like to send the traffic from the desktop clients via the Linux box before it goes out through the router so I can sniff the traffic (some of these are wireless connections). Can I set the default gateway to 192.168.0.2 on the desktop clients and then perhaps add some iptables rules to forward this traffic through 192.168.0.1? Quite happy to change the client desktops to another subnet if that makes it easier. Thanks in advance.

    Read the article

  • 1 Computer Pulls Wrong DNS Every Morning

    - by bradenkeith
    One of my users takes his laptop home, connects to his internal network fine. He brings it in every morning and since Monday - every morning it pulls the wrong DNS every time. It pulls 1 DNS: 192.168.1.1 which is the router. The DNS are external IPs. I have several users that take their laptops home and connect to other networks - what could cause this anomaly? He's booting up when he comes in the office and a simple ipconfig /release /renew fixes the issue.

    Read the article

  • Recommend a desktop app to monitor port 80 on servers

    - by busyone
    Hello, I did some googling but was unsuccessful, so I am posting here. I am looking to get an app (preferably free/open source) to monitor my servers on port 80 that would send me an email/text when some predefined timeout triggers. I could probably write something in VB to do this but i am burried with projects, why reinvent the wheel. I know there are services out there that want you to pay $5/month to do so, I was thinking about a Windows app that would sit on my computer and simply monitor predefined list of IPs on port 80. Thanks!

    Read the article

  • My visitors %20 percent can't reachable to my web site

    - by user39110
    Hi, i have dedicated web server and also i hosting www.btgmaslak.com web site. I'm facing a problem about 1 days. My visitors about 20 percent can't reach my web site. I thing this problem occurs because of dns settings. Can you analyze my dns settings and give me suggestions ? thanks http://www.intodns.com/btgmaslak.com

    Read the article

  • Ajax post not posting email address ?

    - by jeitjet
    UPDATE: It will not work in Firefox, but will work on any other browser. I even tried loading Firefox in safe mode (disabling all plugins, etc.) and still no worky. :( I'm trying to do an AJAX post (on form submission) to a separate PHP file, which works fine without trying to send an email address through the post. I'm fairly new to AJAX and pretty familiar with PHP. Here's my form and ajax call <form class="form" method="POST" name="settingsNotificationsForm"> <div class="clearfix"> <label>Email <em>*</em><small>A valid email address</small></label><input type="email" required="required" name="email" id="email" /> </div> <div class="clearfix"> <label>Email Notification<small>...when a new subscriber joins</small></label><input type="checkbox" name="subscribe_notifications" id="subscribe_notifications"> Receive an email notification with phone number when someone new subscribes to 'BIZDEMO' </div> <div class="clearfix"> <label>Email Notification<small>...when a subscriber cancels</small></label><input type="checkbox" name="unsubscribe_notifications" id="unsubscribe_notifications"> Receive an email notification with phone number when someone new unsubscribes to 'BIZDEMO' </div> <div class="action clearfix top-margin"> <button class="button button-gray" type="submit" id="notifications_submit"><span class="accept"></span>Save</button> </div> </form> and AJAX call: <script type="text/javascript"> jQuery(document).ready(function () { $("#notifications_submit").click(function() { var keyword_value = '<?php echo $keyword; ?>'; var email_address = $("input#email").val(); var subscribe_notifications_value = $("input#subscribe_notifications").attr('checked'); var unsubscribe_notifications_value = $("input#unsubscribe_notifications").attr('checked'); var data_values = { keyword : keyword_value, email : email_address, subscribe_notifications : subscribe_notifications_value, unsubscribe_notifications : unsubscribe_notifications_value }; $.ajax({ type: "POST", url: "../includes/ajax/update_settings.php", data: data_values, success: alert('Settings updated successfully!'), }); }); }); and receiving page: <?php include_once ("../db/db_connect.php"); $keyword = FILTER_INPUT(INPUT_POST, 'keyword' ,FILTER_SANITIZE_STRING); $email = FILTER_INPUT(INPUT_POST, 'email' ,FILTER_SANITIZE_EMAIL); $subscribe_notifications = FILTER_INPUT(INPUT_POST, 'subscribe_notifications' ,FILTER_SANITIZE_STRING); $unsubscribe_notifications = FILTER_INPUT(INPUT_POST, 'unsubscribe_notifications' ,FILTER_SANITIZE_STRING); $table = 'keyword_options'; $data_values = array('email' => $email, 'sub_notify' => $subscribe_notifications, 'unsub_notify' => $unsubscribe_notifications); foreach ($data_values as $name=>$value) { // See if keyword is already in database table $filter = array('keyword' => $keyword); $result = $db->find($table, $filter); if (count($result) > 0 && $new != true) { $where = array('keyword' => $keyword, 'keyword_meta' => $name); $data = array('keyword_value' => $value); $db->update($table, $where, $data); } else { $data = array('keyword' => $keyword, 'keyword_meta' => $name, 'keyword_value' => $value); $db->create($table, $data); $new = true; // If this is a new record, always go to else statement } } unset($value); Here are some weird things that happen: When I only enter text into the email field, (i.e. - abc), it works fine, posts correctly, etc. When I enter a bogus email address with the "." before the "@", it works fine When I enter a validated email address (with the "." after the "@"), the post fails. Ideas?

    Read the article

  • Redirect all access requests to a domain and subdomain(s) except from specific IP address? [closed]

    - by Christopher
    This is a self-answered question... After much wrangling I found the magic combination of mod_rewrite rules so I'm posting here. My scenario is that I have two domains - domain1.com and domain2.com - both of which are currently serving identical content (by way of a global 301 redirect from domain1 to domain2). Domain1 was then chosen to be repurposed to be a 'portal' domain - with a corporate CMS-based site leading off from the front page, and the existing 'retail' domain (domain2) left to serve the main web site. In addition, a staging subdomain was created on domain1 in order to prepare the new corporate site without impinging on the root domain's existing operation. I contemplated just rewriting all requests to domain2 and setting up the new corporate site 'behind the scenes' without using a staging domain, but I usually use subdomains when setting up new sites. Finally, I required access to the 'actual' contents of the domains and subdomains - i.e., to not be redirected like all other visitors - in order that I can develop the new site and test it in the staging environment on the live server, as I'm not using a separate development webserver in this case. I also have another test subdomain on domain1 which needed to be preserved. The way I eventually set it up was as follows: (10.2.2.1 would be my home WAN IP) .htaccess in root of domain1 RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} !^staging.domain1.com$ [NC] RewriteCond %{HTTP_HOST} !^staging2.domain1.com$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301] .htaccess in staging subdomain on domain1: RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} ^staging.revolver.coop$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301,L] The multiple .htaccess files and multiple rulesets require more processing overhead and longer iteration as the visitor is potentially redirected twice, however I find it to be a more granular method of control as I can selectively allow more than one IP address access to individual staging subdomain(s) without automatically granting them access to everything else. It also keeps the rulesets fairly simple and easy to read. (or re-interpret, because I'm always forgetting how I put rules together!) If anybody can suggest a more efficient way of merging all these rules and conditions into just one main ruleset in the root of domain1, please post! I'm always keen to learn, this post is more my attempt to preserve this information for those who are looking to redirect entire domains for all visitors except themselves (for design/testing purposes) and not just denying specific file access for maintenance mode (there are many good examples of simple mod_rewrite rules for 'maintenance mode' style operation easily findable via Google). You can also extend the IP address detection - firstly by using wildcards ^10\.2\.2\..*: the last octet's \..* denotes the usual "." and then "zero or more arbitrary characters", signified by the .* - so you can specify specific ranges of IPs in a subnet or entire subnets if you wish. You can also use square brackets: ^10\.2\.[1-255]\.[120-140]; ^10\.2\.[1-9]?[0-9]\.; ^10\.2\.1[0-1][0-9]\. etc. The third way, if you wish to specify multiple discrete IP addresses, is to bracket them in the style of ^(1.1.1.1|2.2.2.2|3.3.3.3)$, and you can of course use square brackets to substitute octets or single digits again. NB: if you're using individual RewriteCond lines to specify multiple IPs / ranges, make sure to put [OR] at the end of each one otherwise mod_rewrite will interpret as "if IP address matches 1.1.1.1 AND if IP address matches 2.2.2.2... which is of course impossible! However as far as I'm aware this isn't necessary if you're using the ! negator to specify "and is not...". Kudos also to SE: this older question also came in useful when I was verifying my own knowledge prior to my futzing around with code. This page was helpful, as were the various other links posted below (can't hyperlink them all due to spam protection... other regex checkers are available). The AddedBytes cheat sheet's useful to pin up on your wall. Other referenced URLs: internetofficer.com/seo-tool/regex-tester/ fantomaster.com/faarticles/rewritingurls.txt internetofficer.com/seo-tool/regex-tester/ addedbytes.com/cheat-sheets/mod_rewrite-cheat-sheet/

    Read the article

  • How to send email from home ip when the email server isn't a designated outbound mail server allocated to BT Retail customers [on hold]

    - by Mr Shoubs
    (I am sys admin!) I can receive email, but when I try to send an email from my home office via our work email server I get the following reply: Your message did not reach some or all of the intended recipients. Subject: Test Sent: 19/08/2014 17:02 The following recipient(s) cannot be reached: 'Joe Blogs' on 19/08/2014 17:02 Server error: '554 5.7.1 Service unavailable; Client host [my-ip-here] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=my-ip-here' I went to that URL and it says the following: Ref: PBL231588 81.152.0.0/13 is listed on the Policy Block List (PBL) Outbound Email Policy of BT Retail for this IP range: It is the policy of BT Retail that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to BT Retail customers. Please consult the following URL for details on how to configure your email client appropriately. http://btybb.custhelp.com/cgi-bin/btybb.cfg/php/enduser/cci/bty_adp.php?p_sid=fPnV4zhj&p_faqid=6876 Removal Procedure Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy. Going to this URL just says: This site has been disabled for the time being. Does anyone know what I should do to allow me to send emails from my home ip - the site suggests I can configure my email client? (note that I have configured the client to use smtp authentication)

    Read the article

  • What's the piece of hardware listening on Facebook's or Wikipedia's IP address?

    - by Igor Ostrovsky
    I am trying to understand how massive sites like Facebook or Wikipedia work, for my intellectual curiosity. I read about various techniques for building scalable sites, but I am still puzzled about one particular detail. The part that confuses me is that ultimately, the DNS will map the entire domain to a single IP address, or a handful of IP addresses in the case of round-robin DNS. For example, wikipedia.org has only one type-A DNS record. So, people from all over the world visiting Wikipedia have to send a request to the one IP address specified in DNS. What is the piece of hardware that listens on the IP address for a massive site, and how can it possibly handle all the load coming from the requests for users all over the world? Edit 1: Thanks for all the responses! Anycast seems like a feasible answer... Does anyone know of a way to check whether a particular IP address is anycast-routed, so that I could verify that this really is the trick used in practice by large sites? Edit 2: After more reading on the topic, it appears that anycast is not typically used for dynamic web content. Anycast is usually used for UDP (e.g., DNS lookups), or sometimes for static content. One interesting thing to note is that Facebook uses profile.ak.fbcdn.net to host static content like style sheets and javascript libraries. Each time I ping this name, I get a response from a different IP address. However, I can't tell whether this is anycast in action, or a completely different technique. Back to my original question: as far as I can tell, even a large site will have a single expensive piece of load-balancing hardware listening on its handful of public IP addresses.

    Read the article

  • IPv6 - Public IPs, private IPs, IPs derived from the MAC address? Confused!

    - by sinni800
    I'm pretty much excited for IPv6 because of the large address room and (potential?) owning of more than one IP, or even tens of IPs (/122 subnet?) Though one magazine has now confused me. In a current issue (no. 3) of "CT", a German computer magazine, I read that when using IPv6 your IP address consists of your MAC address and various other things, and that this address will be public on the web, no matter what access point / LAN you connect to. My knowledge of IP(v6) is in contrary of this. I thought you will normally always have a a local network IP and NAT takes care of your Internet access, and your provider gives the NAT router an IP. I've heard of the 6to4 interface, but does this one give you your own ip in the IPv6 net? Personally I hope it still is through a personal IP space (like 192.168, 127.16-31, 10. in IPv4) in private networks with a NAT going to the Internet. And also I hope that providers will offer subnets to private customers so they don't have to use NAT anymore. Yay for converting your LAN into the WAN and using better security (so Computers from the same subnet still get access rights like normal).

    Read the article

  • Make curl download using non-Privacy extension IPv6 address?

    - by Azendale
    I currently use net.ipv6.conf.all.use_tempaddr=2 to get IPv6 privacy addresses (which have a random host part are regenerated a couple times a day). I need dynamic DNS because the computer is connected to different networks and that changes the network part of the address. I'm using curl to download a dynamic DNS url and want it to use the Non-random address that uses my MAC. How can I make curl prefer the non-privacy address?

    Read the article

  • Evolution cannot open address book? It also can no longer sync with google contacts. 12.10

    - by chad
    When I press the contacts button it gives me the following error message Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. Detailed error message: No such source for UID '1352672030.12033.3@chad-Lenovo-G570' Also when I try to create a new google address book it will not import contacts. Please do not tell me to use thunderbird Please help! Thanks

    Read the article

  • Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

    - by Martin Oscarsson
    I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • MPLS basic configuration

    - by Vineet Menon
    I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

    Read the article

  • How far should one take e-mail address validation?

    - by Mike Tomasello
    I'm wondering how far people should take the validation of e-mail address. My field is primarily web-development, but this applies anywhere. I've seen a few approaches: simply checking if there is an "@" present, which is dead simply but of course not that reliable. a more complex regex test for standard e-mail formats a full regex against RFC 2822 - the problem with this is that often an e-mail address might be valid but it is probably not what the user meant DNS validation SMTP validation As many people might know (but many don't), e-mail addresses can have a lot of strange variation that most people don't usually consider (see RFC 2822 3.4.1), but you have to think about the goals of your validation: are you simply trying to ensure that an e-mail address can be sent to an address, or that it is what the user probably meant to put in (which is unlikely in a lot of the more obscure cases of otherwise 'valid' addresses). An option I've considered is simply giving a warning with a more esoteric address but still allowing the request to go through, but this does add more complexity to a form and most users are likely to be confused. While DNS validation / SMTP validation seem like no-brainers, I foresee problems where the DNS server/SMTP server is temporarily down and a user is unable to register somewhere, or the user's SMTP server doesn't support the required features. How might some experienced developers out here handle this? Are there any other approaches than the ones I've listed? Edit: I completely forgot the most obvious of all, sending a confirmation e-mail! Thanks to answerers for pointing that one out. Yes, this one is pretty foolproof, but it does require extra hassle on the part of everyone involved. The user has to fetch some e-mail, and the developer needs to remember user data before they're even confirmed as valid.

    Read the article

  • How to set system-wide proxy address using shell script?

    - by skg
    I want to set system Proxy address through my Qt application. So i was wondering if i could write a script which can be executed by my application every time to change the proxy address. I tried : #! /bin/sh echo "# Generated by Application" export $1 echo "Proxy Address ${1} but this script was not successful. I think it was unable to execute "export" command. Can anyone help me resolving this issue ?

    Read the article

  • WCF, Metadata and BIGIP - Can I force the correct url for the WSDL items?

    - by Yossi Dahan
    We have a WCF service hosted on ServerA which is a server with no-direct Internet access and has a non-Internet routable IP address. The service is fronted by BIGIP which handles SSL encryption and decryption and forwards the unencrypted request to ServerA (at the moment it does NOT actually do any load balancing, but that is likely to be added in the future) on a specific port. What that means is that our clients would be calling the service through https://www.OurDomain.com/ServiceUrl and would get to our service on http://SeverA:85/ServiceUrl through the BIGIP device; When we browse to the WSDL published on https://www.OurDomain.com/ServiceUrl all the addresses contained in the WSDL are based on the http://SeverA:85/ServiceUrl base address We figured out that we could use the host headers setting to set the domain, but our problem is that while this would sort out the domain, we would still be using the wrong scheme – it would use http://www.OurDomain.com/ServiceUrl while we need it to be Https. Also – as we have other services (asmx based) hosted on that server we had some issues setting the host headers, and so we thought we could get away with creating another site on the server (using, say, port 82) and set the host header on that; now, on top of the http/https problem we have an issue as the WSDL contains the port number in all the urls, where BigIP works on port 443 (for the SSL) Is there a more flexible solution than implementing Host Headers? Ideally we need to retain flexibility and ease of supportability. Thanks for any help…

    Read the article

  • Howto query arp table on iPhone?

    - by anthony vage
    Hi, i am new on iPhone development. I want to integrate wake on lan into my app without squeezing my users to enter the computers mac adress when the ip is already known. I googled for about some hours, take the source code of apples arp tool but i don't know howto manage this on iPhone. I am grateful for any help. Thanks! anthonyvage

    Read the article

  • Google Maps geocoding (address to GLatLng)

    - by antosha
    Hi, I am trying to draw a geodesic polyline with Google Maps JavaScript API from two address points. <script type="text/javascript">// <![CDATA[ var polyOptions = {geodesic:true}; var polyline = new GPolyline([ new GLatLng(), new GLatLng() ], "#f36c25", 5, 0.8, polyOptions); map.addOverlay(polyline); if (GBrowserIsCompatible()) { map.addOverlay(polyline); } // ]]></script> Could someone tell me how can I dynamically geocode an address into GLatLng coordinates? (I am a little confused after reading Google's API documentation http://code.google.com/apis/maps/documentation/javascript/v2/services.html) Thanks :)

    Read the article

  • Change the get parameters in the address bar in jquery

    - by hao
    when you search on yelp, by adding additional search parameters the page does not reload. I think the results are changed based on ajax, however when you click on one of the restaruants and go back to the previous page. All of the parameters are still there. I noticed the address bars change as the parameters change. I found http://www.asual.com/jquery/address/ but it seems to add # at the end of the url. Is there a way to make it simply like index.php?xyz=1 without refreshing the page

    Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >